TileVision 23 Operating Instructions
Contents
1. eee Main Menu Picture Sound Special Setup Special N R Mode2 Blue Back Auto Sleep Child Lock ARC If the TileVision connects with an external input source during the ten minutes after a TV programme stops the Auto Sleep function is automatically cancelled Noise Reduction N R The N R feature may improve the picture quality on poor broadcasts If you experience noise on a certain programme setting the N R to Mode1 or Mode for this programme may greatly improve the picture 1 Press the MENU fm button and press the A V buttons to select the Special menu Press the gt button to enter the Special menu 2 Press the lt P buttons to select the N R options Model Mode2 or Off 3 Press TV AV twa button to return to normal TV viewing Blue Back TV mode only If no signal is being received or the signal is very weak a blue screen automatically replaces the noisy picture background If you wish to continue viewing the poor picture you must select to turn Blue Back Off Pressing the lt P buttons will alternate between On and Off Auto Sleep TV mode only and Sleep Timer If you select Auto Sleep the TileVision will automatically switch to standby approximately ten minutes after current channel stops broadcasting 1 Press the MENU button and press the A V buttons to select the Special menu Press the gt button to2. 16 9 zoom 14 9 zoom In Zoom mode you can adjust the vertical position of the picture with the PRAPRY buttons whilst the ARC information is displayed on screen In HDMI mode the zoom settings are not available The Programme List Analogue TV Programmes stored in the memory can be checked by displaying the programme LIST Programme List Displaying the Programme List Press the RED button to display the programme list menu The programme list appears on the screen Each programme list contains 20 programmes Selecting a programme in the Programme List Select a programme with the or lt P buttons Then press the OK button The set switches to the chosen programme Paging through the Programme List There are 5 programme table pages giving a total of 100 programmes Pressing the AW or lt P buttons repeatedly turns the pages DTV Text DTV Text MHEG 5 standara is only available in Great Britain Ireland and New Zealand To access DTV Text press the TEXT em or Red button depending on the programme s broadcaster A small banner loading will be displayed on screen After a few seconds the broadcaster s menu will appear either overlaying part of the current programme Channel Logo Item one Item two Item three y Item four Item five Item six Item seven INDEX Latest news item Typical overlay example To exit press TEXT
3. 1 TileVision glass front plate assembly complete with Velcro fixing strips 12VDC HDMI S Video L Audio R EURO SCART SVC Port Internal Antenna o 000 DC12V Power In EURO SCART RGB FB AV In AV HDMI High Definition Multimedia Interface In SVC Port connect for service only S VIDEO In Internal Antenna S VIDEO Audio In Left White Right Red Q Antenna Input 750 TV 23 Main Connector Array 24VDC HDMI S Video L Audio R EURO SCART SVC Port Internal Antenna 0000 DC24V Power In EURO SCART RGB FB AV In AV ww w e HDMI High Definition Multimedia Interface In SVC Port connect for service only Q 2 9 S VIDEO In Internal Antenna 9 5 S VIDEO Audio In Left White Right Red Antenna Input 750 X3 e The antenna should be connected to the TileVision using the Antenna Input and not to the Internal Antenna connection This allows Sky or Sky remote control to be used to change channel on the Sky digital receiver via the infrared sensor in the TileVision See page 7 for more information 0000 TILEVISION Remote control sensor and indicator Power Indicator Status Indicator Status v Full function Red Stand by remote control Green Power on EE illustrated without Red blinking Remote c
4. Nederlands EAAHNIKA Dansk Hrvatski Tuning Setup and Editing Analogue TV Programmes Note It is recommended that Auto Programme is used when installing TileVision as all available programmes will be stored Auto Programme 1 2 Press the MENU jaw button Press the AW buttons to select the Setup menu and then press the gt button Press the buttons to select the Auto Programme menu and then press the gt button Select the Country with the lt P buttons Choose from Austria Belgium Switzerland Czech Rep Germany Denmark Spain France Finland Great Britain Greece Hungary Italy Norway Netherlands Portugal Poland Sweden Slovenia Slovakia Turkey others BG Western Europe Asia Middle East Africa Australia I UK Hong Kong South Africa DK Russia China Eastern Europe L France confirm The Auto Programme will now start this will take a few minutes to complete To delete skip move or name the stored programmes see Programme Edit on page 19 Main Menu Picture Sound Special Setup Setup Auto programme Manual programme Programme edit Clock Language Auto Programme Country Great Britain System BG Storage From 1 Start ee Tuning Setup Editing Analogue Programmes Manual Programme lets you tune and arran
5. O M 42 Bac MENU Exit TV AV bd B a c k MENU Exit TV AV Store OK 4 gt 6 You can view the signal strength reception for the channel that is currently being viewed 7 Press the TV AV fw button to return to normal TV viewing 5 Press the buttons to select Software Update menu and press the gt button to enter Software Update menu Software Update Current Software Version 0 0 2 46 7 UK New version is found Do you want to start downloading now JER B a c k MENU Exit 2 Store 6 Press the OK button to download the Software Upgrade 7 After downloading is completed wait for a moment Then restart the TileVision to install the software upgrade Software Update WARNING Writing To Flash Don t Power Off TV It takes about 2 minutes Main Menu Picture Sound Special DTV System DTV System DTV Scanning DTV Setup Language New Service Message Active Antenna DTV System Language English Norsk Deutsch Svenska Frangais Romaneste Espanol Italiano Nederlands EAAHNIKA Dansk Hrvatski Selecting a Menu Language The menu can be displayed on the screen in a desired language m 1 Press the MENU button to display the Main Menu 4 On the DTV System menu press the AW buttons to select Language and press
6. New Service Message Active Antenna Digital TV Electronic Programme Guide EPG Viewing the EPG Digital TV Electronic Programme Guide EPG Edit Favourite Channel Groups Picture Control Manual Picture Control Picture Control Auto Picture Control Picture Effect Sound Control Manual Sound Control Suction Lifter Soft Cloth Clear Silicone Sealant Isopropyl Alcohol Please observe safety precautions on the container Keep out of reach of children and animals ERANT Sound Control Auto Sound Control Sound Output Selection Mono Output Selection Isopropyl alcohol is available from most pharmacies Clock Functions and larger electronics wholesalers It is an effective Other Functions Noise Reduction Blue Back Auto Sleep and Sleep Timer 4 Child Lock degreasing agent Aspect Ratio Control ARC Please observe safety precautions on the container The Programme List Keep out of reach of children and animals Do not drink Analogue TV Teletext Functions of Teletext Displaying the Teletext Information Teletext Button Functions Troubleshooting Specifications HIGHLY FLAMMABLE IRRITANT eececeeee If any items are missing Please make sure the following items are 2 TV 17 Main Connector Array contact your dealer included with your TileVision
7. User select ON OFF 9 Select SRS WOW with the AW buttons and use the lt P buttons to select ON or OFF 10 Press the MENU button to return to the preceding menu or the TV AV button to return to normal TV viewing The benefits of SRS WOW sound are enormous you can be completely enveloped in sound The Equaliser menu is not available when SRS WOW is set to On Auto Sound Control The sound settings for Flat Music Movie Speech and SRS WOW are programmed at the factory for optimum sound reproduction and cannot be changed Sound Effect 1 Press the SOUND button on the full function remote control 2 Press the SOUND button repeatedly to select a setting Each press of the button changes the setting as below gt TE After short time the display will clear leaving the setting as chosen II Sound Output Selection The 1 1 button is only on the full function remote control In DTV and AV modes you can select output sound for the left and right speakers Repeatedly press the I II button to select the sound output L R Audio signal from audio L input is sent to the left speaker and audio signal from audio R input is sent to the right speaker L L Audio signal from audio L input is sent to the left and right speakers R R Audio signa
8. 1 Press EPG button two times and the DTV EPG Profile Menu appears DTV EPG Mon Tue Wed Thu Fri Sat Sun 1 2 3 4 5 6 7 4 User Profile Please add a profile before continuing Profiles All Services skip 1 USER SSS p en 1 Ium 7 BBeTHRE SSS Se mp Save OK Exit Profile Add Edit lt All Services gt Exit TV AV Rename m Delete 2 Press the Red button to add a user profile and the Profile renaming menu is displayed Profile renaming Please use the number keys for input Cancel Renaming Save Profile Name Use the numerical buttons to select the letters for the profile name Press the number button as often as necessary to select the required letter Press the lt gt buttons to move the cursor from letter to letter Press the Blue button cancel Profile renaming Press the OK ex button to save Profile Name Edit Favourite Channel Groups continued 3 Press the Green button to edit lt All Services Use the gt buttons to include the channel as a favourite or exclude it from the list Mon Tue Wed Thu Fri Sat Sun 1 2 3 4 5 6 User Profile Profile Configuration Profiles All Services v skip Es lt Se E s Save OK Exit Profile EPG Add Back to lt Profiles gt Exit TV AV Move Service m Delete 4 Press the Blue button to display the favourite channel list so
9. 4 Select the programme name to edit with the AW buttons and lt gt buttons Deleting a programme 1 Select a programme to be deleted with the AW or lt P buttons 2 Press the RED button once The selected programme is deleted all the following programmes shift up one position Selecting a favourite programme 1 Select a favourite programme with the AW buttons or lt gt 2 Press the GREEN button Main Menu Picture Sound Special Setup Setup Auto programme Manual programme Programme edit Clock Language Programme Edit using the numbers 0 9 the alphabet from 7 and a space Programme 1 System I Channel V UHF 55 Name BBC 1 Press AW buttons to select Name Then press the gt button This function lets you select your favourite programme directly Press the lt P buttons to move the red cursors to select the Finetune 0 character to edit Press the AW buttons to select the desired Memorize letter or number Press the gt button to select the next Delete Favourite character to edit or confirm the name when on the last letter EVISION 14 Press the TV AV ww button to return to normal TV viewing TILEVISI TILEVISION Moving a programme in Programme Edit menu 1 Select a programme to be moved with the AW or lt P buttons 3 Move the programme to the desired programme number with the or lt P buttons 4 Press the YELLOW button a
10. or with the current programme in a smaller window next to the text menus and instructions Latest news item Item one Item two Item three Item four Item five Item six Item seven adveretising banner Item eight Typical Item nine inset HOME HELP SHORTCUTS MENU example Use the buttons or in some cases the lt P buttons to navigate the menus and the OK e button to select items Use the Red Green Yellow and Blue buttons to access shortcuts help and additional menus etc as shown on screen To exit DTV Text press the TEXT the TV AV fm button or change channel As all DTV Text navigation uses the 4 Colour 0 9 number buttons all functions are available with the TileVision waterproof remote control If you press the TEXT 09 button immediately after changing channel you may see the screen display as below 100 This is because the TileVision had not had time to load any text information Press the TEXT 0 button again wait couple of seconds and try again Some broadcasters show a red on screen prompt when DTV Text is available To remove the prompt from the screen press the Green button Functions of Teletext Part Display Contents Selected page number Broadcast Station identity Current page number or searching status Date and time Text information FasText information Red Green Yellow Blue Denn Displa
11. Contrast Brightness Colour or Sharpness 7 Press the lt P buttons to adjust the picture setting to your requirement as shown in the table below 8 Press the TV AV wav button to store your personal preferences in User Selected Item Setting Change Main Menu Picture Sound Special Setup Picture Colour Temperature Contrast Brightness Colour Sharpness Colour Temperature Standard Reddish Greenish Bluish User Contrast Less Contrast lt 0 100 gt More Contrast Brightness Darker lt 0 100 gt Brighter Colour Lower Colour Intensity lt 0 100 Higher Colour Intensity Sharpness Soft picture lt 0 100 gt Sharp Picture Auto Picture Control Manual Sound Control The Picture options Dynamic Standard Mild and Game The Equalizer can be manually adjusted by cutting and boosting programmed for optimum picture reproduction at the factory and the five selected frequency bands and storing the settings as User cannet ie n ded The left to right Balance can be adjusted and if AVL is switched on there will be a more equal volume level between programmes Picture Effect 1 Press the MENU button 1 Press the PICTURE button on the full function remote 0 eene control 2 Press the buttons to select the Sound menu and then press the gt
12. button M M 2 Press the button repeatedly Each press of the button changes ain Menu the screen display as below 3 Press A Y buttons to select the desired sound item Sain CS EIN Kai Equalizer Balance AVL or SRS WOW Special There Setup poe 4 Press the lt P buttons to make desired adjustment Dynamic Vivid Picture Be eee ee eee eRe eee Standard Standard Picture 5 Press the lt P buttons in Equalizer to set the Equalizer Mild Softer Picture rrr DII Game External Video Game Picture Setup 6 Press the AW buttons to select the preferred setting Son 9 User Manual Picture Setup Flat Music Movie Speech or User To set the Equalizer Equalizer After a short time the display will clear leaving the setting as chosen a Select User by pressing the buttons Fouad b Select a sound band by pressing the lt P buttons SRS WOW c Make the desired sound level adjustment with the AY buttons d Press the MENU button to return to the last menu or the TV AV wai button to return to normal TV viewing Equalizer VXOREM EE 7 Press the buttons to select Balance and adjust the left to right balance with the lt P buttons Movie cs 1 8 Select AVL with the AY buttons and use the lt P buttons to
13. made with both the TileVision and the Sky receiver disconnected from the mains supply Once the connections have been made the Sky receiver must be setup to supply power to the RF2 socket as detailed below 1 On the Sky remote control press SERVICES to show the SERVICES menu 5 Press the down arrow to select RF Outlet Power Supply and press the left or right arrows to change the setting to ON To set up the Sky receiver to work with the TileVision you must use the Sky remote control via the main TV TV 1 settee ences Connecting to HDMI and S VIDEO Inputs Connecting to the SCART Input EAM All connections must be made before sealing the front plate into the back box All connections must be made before sealing the front plate into the back box A For HDMI Input Satellite Receiver Satellite Receiver Cable Box or Hard Cable Box or Hard Disk Recorder Disk Recorder L Audio R EURO SCART SVC Port Internal A DVD Player SCART Connection Reference A SCART to SCART connector Pin Name Description RGB Video Audio L R or HDMI S Video L Audio R Audio Out Right Composite Video Audio L R AIR Audio In Right AOL Audio Out Left Mono 7H Ph AGND Audio Ground BGND RGB Blue Ground 0D AIL Audio In Left Mono B RGB Blue B SCART to RCA connectors SWTCH Audio RGB switch 16 9 Composite Video Audio L R All connec
14. software update banner Software Update New version is found Please go to DTV Setup menu to update the software lt gt Exit TV AV Main Menu 4 On the DTV System menu press the AV buttons to select DTV Main Menu Picture Setup and press the gt button to enter the DTV Setup menu Picture Sound 1 Press the MENU button to display the Main Menu Sound Special DTV Setup Tm Special DTV System SS or 2 On the Main Menu Use the AY buttons to select DTV System DTV System Banner Display Time 3 seconds E Sabie Lavage Audio Language English 3 Press the gt button to enter the DTV System menu Common Interface a 5 Software Update gt 4 On the DTV System menu press the buttons to select DTV DTV System E x i t TV AV Setup and press the gt button to enter the DTV Setup menu DTV System DTV Scanning DTV Scanning DTV Setup 5 Press the buttons to select Signal Strength and use the gt DTV Setup DTV Setup Language button to view the Signal Strength banner Banner Dieis time 210 Language New Service Message Subtitle Language English New Service Message Active Antenna Signal Strength Audio Language English Active Antenna E Common Interface Signal Strength gt Software Update
15. the gt button to display the Language menu 6 Press the TV AV button to return to normal TV viewing The language selected applys to both DTV and TV modes New Service Message If New Service Message is set to On a banner will be displayed when any new channels are added 1 Press the MENU button to display the Main Menu On the DTV System menu press the AV buttons to select New Service Message and press the 4 buttons to select On or Off 5 Press the TV AV wav button to return to normal TV viewing Active Antenna If Active Antenna is set to On the antenna receives 5V from the TileVision If your antenna is external or a self powered indoor antenna set Active Antenna to Off if not set Active Antenna to On 1 Press the MENU button to display the Main Menu 4 On the DTV System menu press the buttons to select Active Antenna and press the 4 buttons to select On or Off 5 Press the TV AV wav button to return to normal TV viewing Main Menu Picture Sound Special DTV System DTV System DTV Scanning DTV Setup Language New Service Message Active Antenna DTV System DTV Scanning DTV Setup Language New Service Message Active Antenna Viewing the EPG The EPG information is provided by the broadcasters Programme entries may appear blank or out of dat
16. up down buttons Adjust the volume 13 EPG button Displays the Electronic Programme Guide 15 Sleep button Sets the sleep timer 14 Menu down button Menu and EPG navigation 16 ARC Aspect Ratio Control button Change picture format 15 OK button Accepts your selection or displays current mode Puto AGI A Sto TDI GOD TH SS ZOOM 200m 16 Colour buttons Teletext FastText amp Digital TV menu options 17 PR Programme up down buttons Selects next or previous programme Make sure there no objects between the 18 Previous Programme button Returns to the previously remote control and viewed programme 19 Colour buttons Teletext FastText amp Digital TV menu options Do not place the remote 20 LIST button Display the programme list control near a heater 21 FAV Press to switch to your favourite channels A strong blow to the remote control may cause 22 Teletext buttons See page 43 for Teletext function table it HOETO operate 23 PIP buttons Picture in Picture is not available on TileVision 24 Picture button Press to recall your preferred picture settings 25 Sound button Press to recall your preferred sound settings 26 AUDIO button Select audio language directly 27 PROFILE button Select User Profile directly ee Switching the TileVision On Off Please allow a minimum of five seconds after switching the TileVision off before switching it on again 2 To swi
17. you wish to listen to 1 Press the MENU button to display the Main Menu 2 3 Press the button to enter the DTV System menu 4 On the DTV System menu press the AW buttons to select DTV Setup and press the gt button to enter the DTV Setup menu DTV Setup Banner Display Time 3 seconds Subtitle Language English English Common Interface Signal Strength Software Update vvv 42 Bac MENU Exit Store OK 5 Press the buttons to select Audio Language and use the lt gt buttons to select your desired subtitle language 6 Press the OK ex button to save your selection as the language for the broadcast Press the TV AV button to return to normal TV viewing Common Interface Common Interface is not applicable to TileVision Main Menu Picture Sound Special DTV System DTV System DTV Scanning DTV Setup Language New Service Message Active Antenna Signal Strength Software Update You can check and see how strong the signal is for any stored To keep your TileVision up to date with new digital television channel features software updates are periodically broadcast as part of the normal television signal Your TileVision will automatically detect 1 Press the MENU ieu button to display the Main Menu these signals and display the
18. C Power Adaptor Input 100 240 VAC 50 60 Hz Input 100 240 VAC 50 60 Hz Output 12 VDC 6 67 A Output 24 VDC 5 42 A System Analog PAL BG DK SECAM BG DK L PAL BG DK SECAM BG DK L Digital DVB T MHEG MPEG 2 decoding DVB T MHEG MPEG 2 decoding Pibdisinms VHF 2 13 UHF 21 69 Cable 51 541 VHF 2 13 UHF 21 69 Cable 51 541 FVS 100 programme Analog FVS 100 programme Analog Size Diagonal 17 434 34 mm Widescreen 16 9 23 584 2 mm Widescreen 16 9 Resolution Pixel no WXGA 1280 x 768 WXGA 1366 x 768 Type a si TFT active matrix a si TFT active matrix LCD Brightness 550 cd m2 450 cd m2 Contrast Ratio 600 1 1 200 1 Viewing Angle L R U D 89 89 89 89 L R U D 89 89 89 89 Colour Depth 16 7 M colours 16 7 M colours Response Time 12 ms Typ 16 ms Typ External Antenna Impedence VHF UHF at 75 Ohm VHF UHF at 75 Ohm 5W 5W rms both channels driven 5W 5W rms both channels driven Audio Output Nicam A2 Stereo Nicam A2 Stereo Graphic Equaliser Graphic Equaliser OSD Programme list edit Programme list edit Menu multi language halftone Menu multi language halftone Connection Ports 12 VDC 6 67 A 24 VDC 5 42 A HDMI HDMI AUDIO L amp R AUDIO L amp R EURO SCART Full EURO SCART Full S VIDEO S VIDEO ANTENNA TUNER Co axial ANTENNA TUNER Co axial Speakers clip terminals Speakers clip terminals Supplied Loudspeakers External Wat
19. DVB T TILEVISION 17 23 the bathroom television Di B DVB T TILEVISION 17 23 the bathroom television CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING TO PREVENT INJURY THIS APPARATUS MUST BE SECURELY ATTACHED TO THE WALL IN ACCORDANCE WITH THE INSTALLATION INSTRUCTIONS CAUTION DO NOT REMOVE COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL BEWARE OF STATIC SENSITIVE PARTS DV3 digital V Digital Video Broadcasting Approved product HIGH DEFINITION MULTIMEDIA INTERFACE mr SRSCO The HD ready logo is a trademark of EICTA This symbol is intended to alert the user to the presence of VAN important operating and maintenance servicing instructions in the C literature accompanying the appliance Waste Electrical and Electronic Equipment WEEE Directive In the European Union this symbol indicates that this product should not be disposed of with household waste It should be deposited at an e appropriate facility to enable recovery and recycling This product contain Electrical Electronic Parts which are produced using components in compliance with the requirements of European oHS Union Directive 2002 195 EC for the Restriction of the use of certain Hazardous Substances in Electrical and Electronics Equipment RoHS Safety Instructions and Warnings Do not use a damaged socket and do not let the power cord Do not add an additional screen or
20. Selects between DTV TV SCART 3 Number buttons Selects programme numbers COMPONENT S VIDEO or HDMI mode Clears the menu from the screen ZN 7 1 2 4 Subtitle button Changes language and programme 4 5 4 Previous Programme button Returns to the previously 5 Info button Displays the information about the channel viewed programme 5 Number buttons Selects programme numbers 6 EPG button Displays the Electronic Programme Guide Eg 0 5 6 Teletext On Off button See page 42 for Teletext function 1 DTV button Switches between analogue and digital TV table buttons 16 to 19 8 button Selects language for dual language broadcasts a gt 7 Info button Displays the information about the channel 9 Menu button Displays the Main Menu and programme when the Digital TV mode OPRA O 10 TV AV button Selects between DTV TV SCART 8 PR Programme up down buttons Selects next or COMPONENT S VIDEO or HDMI mode V oc previous programme Clears the menu from the screen 9 voL Volume up down buttons Adjust the volume 11 Menu left right buttons Menu and EPG navigation 10 Menu left button Menu and EPG navigation 12 Menu up down buttons Menu and EPG navigation 11 Menu up button Menu and EPG navigation 13 OK button Accepts your selection or displays current mode 12 Menu right button Menu and EPG navigation 14 VOL Volume
21. cover the TileVision s glass touch a heat source The heated screen prevents condensation forming in steamy This may cause an electric shock or fire rooms and covering the screen may cause the unit to overheat Do not attempt to service the unit Do not connect too many extension cords or plugs to Contact an authorised dealer or repair service an outlet Servicing the unit yourself may cause an electric shock or fire This may cause a fire If there are any unusual sounds or smells coming from the Keep the power adaptor away from any heat source unit unplug it immediately and contact an authorised This may cause a fire dealer or repair service This may cause an electric shock or fire If an outside antenna is connected to the unit ensure the Ensure the antenna is located away from overhead cables external to internal cable entry is fully sealed This may cause an electric shock This may cause an electric shock or fire To prevent injury the TileVision must be securely attached to the wall in accordance with the installation instructions The power supply must be connected to a mains socket outlet with a protective earth connection The mains plug or the pull switch is the disconnect device and must remain readily operable Failure to observe the above safety warnings may invalidate the warranty Safety Instructions and Warnings Tools Required Unpacking your TileVision Your TileVision TileVi
22. d Audio are found in the central portion of the connection array If these inputs are to be utilised the necessary cables must be installed at the same time as the back box COMPONENT video can also be connected via a suitable COMPONENT to SCART adaptor refer to pages 8 and 9 of these instructions Note Careful consideration should be given to use of these inputs prior to the installation of the unit Connecting an Antenna or Cable ES To view television channels correctly a signal must be received by the set from one of the following sources an outdoor antenna a cable television system or a satellite dish 1 Connect the antenna or input cable to the 750 coaxial input on the rear of the TileVision 2 If you are using an indoor antenna in the loft space you may need to turn it when tuning your television until you receive a EE Clear picture TileVision The signal level fed to the set must be at least 60dBu 1mvV or the picture may be noisy If in doubt consult a qualified aerial technician See page 29 for Active Antenna set up Cable Television Network Sky Remote Control Link Setup If a TileVision is used with a Sky digital receiver which has two RF outputs the channel can be changed on the Sky receiver using the Sky remote control via the remote sensor on the TileVision The connection to the Antenna RF sockets on the TileVision and the Sky receiver must be
23. e as a result of the information broadcast on a given channel The display will dynamically update as soon as new information becomes available You can display EPG information at any time while watching digital programmes DTV EPG Mon Tue Wed Thu Fri Sat Sun 1 2 4 5 6 rd Service Category All Services lt gt Services AV Schedule Aug 01 2007 2 BEC TWO Go To OK User Profile EPG Schedule Exit TV AV Theme 2 lt 1 Press EPG button to display the DTV EPG menu 2 Use the numerical buttons to select the date for which you want to see the listing 3 Press the Blue button to switch between Service Category and Theme 4 Use the lt P buttons to select Service Categories or Themes of various kinds Service Category All Service Free to Air Services Pay TV Services Audio Services Themes Movies News Entertainment Sports Children Youth Education Lifestyle Drama Undefined Unsupported If you select All Services all channels are displayed in the left hand column 6 Press the Red button to move the highlight between the left and right hand columns 1 Pressing the Green button will display the detailed programme information for the currently highlighted programme Press the Green button again to hide the detailed programme information and display the programme listing Edit Favourite Channel Groups You can add rename and edit user profiles which contain groups of favourite channels
24. e to all four sides of the box Restore mains power using the remote pull switch and press the Power 0 1 button on the remote control to turn the unit on again and check that it is still working correctly Sealing the unit When you are sure that the unit is installed correctly put it in standby mode and apply a clear silicone sealant to the joint between the sides of the back box and the sides of the front plate Ensure that the Installing the Front Plate SERES between silicone is worked into the space evenly and is applied the edge of the screen without any gaps bubbles or voids Wipe any excess and the back box silicone sealant away and check for any imperfections Rectify any errors as necessary This seal is essential for the reliable and safe operation of the TileVision and must be completely waterproof Sealing Tip To achieve a neat seal easily it may be found useful to use masking tape around the TileVision glass screen and the surrounding tiles just leaving sufficient gap to apply the silicone sealant around the joint between the sides of the back box and front plate The acrylic surround can be fitted using silicone sealant once the tape is removed Back box ISilicone Grout Screen Masking tape Tile elcro Fitting the acrylic surround The mirrored acrylic surround is a cosmetic addition and has no bearing on the integrity of the waterproof seal of the TileVision If the surround is being fitted to t
25. enter the Special menu 4 Press TV AV button to return to normal TV viewing The sleep timer function is only available by pressing the SLEEP button on the full function standard remote control Press the SLEEP button repeatedly to select the number of minutes The display will appear on the screen select 0 15 30 60 120 minutes The sleep timer automatically switches the TileVision off after the preset time elapses To view remaining sleep time press the SLEEP button once To cancel the sleep time Select 0 with the SLEEP button Child Lock This function is not applicable to TileVision 9 6 If ARC is set to Auto the TileVision will alter the picture to best suit the programme being received and there will be little need to change the setting manually TileVision can be viewed in six picture formats by repeatedly pressing the ARC button on the full function remote control until the desired image is selected EI Ex E m3 m0 Zoom 149 Zoom Alternatively the waterproof remote control can be used to alter the ARC setting via the Special menu 1 Press the MENU button and press the A V buttons to select the Special menu Press the gt button to enter the Special Special menu N R Mode2 a a cafe M Blue Back On Auto Sleep Off Child Lock Off
26. erproof 80 External Waterproof 80 Functions Auto Programme Auto Programme Manual Programme Manual Programme ACMS Auto Channel Memory System ACMS Auto Channel Memory System PSM Picture Status Memory PSM Picture Status Memory SSM Sound Status Memory SSM Sound Status Memory SRS WOW SRS WOW AVL Auto Volume Leveller AVL Auto Volume Leveller ARC Aspect Ratio Control ARC Aspect Ratio Control Teletext TOP FLOF MHEG 5 Teletext TOP FLOF MHEG 5 without notice Design and specifications are subject to change ESTABLISHED 1936 PORTER LANCASTRIAN LIMITED www tilevision tv TV 17 FR5 PS 17 and TV 23 FR3 PS 23 Tilevision Operating Instructions October 2007 Part No TVS 00318 04
27. essage Active Antenna Subtitle Language If the current programme provides subtitle information you can select the language for the Subtitle 1 Press the MENU button to display the Main Menu On the DTV System menu press the AW buttons to select DTV Setup and press the gt button to enter the DTV Setup menu DTV Setup Banner Display Time 3 seconds Subtitle Language English Audio Language English Common Interface Signal Strength Software Update vvv Bac k MENU 5 Store Exit 42 5 Press the buttons to select Subtitle Language and use the lt gt buttons to select your desired subtitle language 6 Press the OK button to save your selection as the language that subtitles will be displayed in at the bottom of the screen when Subtitles are switched on Press the TV AV wav button to return to normal TV viewing Subtitles can only be switched on or off with the full function remote control Press the Subtitle button to display the Subtitle Option press the OK button to confirm the option shown or press the Subtitle button to hide the Subtitle Option again Subtitles are not available from all broadcasters All languages listed are not necessarily available from all broadcasters Audio Language If the current programme is available in multiple audio languages you can select the language that
28. gain to release this function Skipping a programme number in Programme Edit menu 1 Select a programme to be skipped with the A V or lt gt buttons 3 Press the BLUE button again to release the skipped programme When a programme number is skipped it means that you will be unable to select it using the PR AV buttons during normal TV viewing If you want to select the skipped programme enter the programme number with the NUMBER buttons or select it in the programme edit menu Auto Tuning Digital TV The TileVision must in DTV mode to perform Digital TV tuning Press the TV AV button and select DTV from the Input Selection menu Auto Tune all Receivable Digital Channels 1 Press the MENU button to display Main Menu in the DTV mode 4 On the DTV System menu press the AY buttons to select DTV Scanning Main Menu 5 Press the button to start DTV scanning H Picture Sound Special DTV System The DTV Scanning menu is displayed and the DTV Scanning starts immediately Scanning tuning and sorting can take several minutes please wait for the TileVision to finish the process Once the channel search has finished and all available channels have been stored the channels will be sorted and channel 1 will be selected DTV Scanning Please wait 1 100 DTV System DTV Scanning DTV Setup Language New Service Message Active Antenna 4 56 5 56 3 BBC TWO Excellent 3 BBC ONE Exce
29. ge the programmes in any order you want You can assign an eight character programme name to each programme number Main Menu Picture Sound Special Setup Setup Auto programme Manual programme Programme edit Clock Language Manual Programme Manual Programme 1 Press the MENU button 2 Press the AW buttons to select the Setup menu and then press the gt button 3 Press the A V buttons to select the Manual Programme menu and then press the gt button 6 Select a TV system with the lt P buttons BG Western Europe Asia Middle East Africa Australia I UK Hong Kong South Africa DK Russia China Eastern Europe L France 7 Press buttons to select Channel Then press the gt button to select V UHF or Cable 8 Press the A V buttons to select V UHF or Cable as required and press the gt button to confirm Select the channel number either directly with the number buttons or the AW buttons Press the gt button to confirm 9 You can assign a programme name with up to eight characters Programme Edit This function enables you to delete make favourite move or skip the stored programmes You can also move channels to different programme numbers or insert blank programme data into the selected programme number 1 Press the MENU iw button 2 Press the buttons to select the Setup menu and then press the gt button 3 Press the A V buttons to select Programme Edit and then press the gt button
30. he BBC followed by Weather S 5 Common Interface Signal Strength Software Update vvv B a c k MENU Exit Store OK 42 6 Use the lt gt buttons to select the required banner display time DTV System DTV Scanning DTV Setup Language New Service Message Active Antenna If no programme information is available gt EEE 7 Press the OK button to store the chosen display time and press the TV AV wav button to return to normal TV viewing no banner is displayed Press the INFO button again to remove the banner from the when the INFO Screen button is pressed The layout of information contained in the banner is as shown below Channel number and channel name Current time Programme name Q Icons Displayed only when the channel is a locked channel vg Displayed when the MHEG application is triggered to make DTV Text available This icon will only be displayed in the United Kingdom Ireland and New Zealand Displayed only when the audio language is operated Displayed only when programme information is available Displayed only when subtitle text is available Displayed only when teletext is available etailed programme information Main Menu Picture Sound Special DTV System DTV System DTV Scanning DTV Setup Language New Service M
31. he TileVision the same silicone sealant used to seal the screen into the back box can be used to fasten the surround to the wall Lay the surround on a flat surface and apply the silicone to the matt grey surface as shown Once the adhesive has been applied align the apply the adhesive surround with the on the grey side of TileVision using a spirit the mirrored surround evel as a guide and press the acrylic surround firmly to the wall After the silicone sealant has hardened the protective film can be remove from the front of the surround Cleaning Instructions To clean the screen and surround use only a soft damp cloth Under no circumstances are abrasive cleaners to be used failure to observe this warning will invalidate your guarantee Note It is the installer s responsibility to ensure that the TileVision unit is installed and sealed correctly failure to do so will invalidate your guarantee The unit will require cleaning and re sealing after any servicing repair operation 1955222 The Waterproof Remote Control The Full Function Remote Control DER Buttons marked are only available in Digital TV mode Buttons marked Q are only available in Digital TV mode 1 Power On Off button Turns the TileVision on from 1 Power On Off button Turns the TileVision on from or off to standby or off to standby 2 Menu button Displays the main menu 2 Mute button Turns the sound on or off 3 TV AV button
32. integration with a multi room audio video system This should be carried out by a qualified engineer 1 Connect the HDMI out of the PC to the HDMI input on the TileVision using a HDMI cable Adaptors are commercially available to allow video and audio equipment to be connected to the TileVision via the EURO SCART socket See the examples in diagrams B SCART to RCA C SCART to RCA and D SCART to COMPONENT When connecting COMPONENT video via the SCART socket connections must be made to the chosen COMPONENT to SCART adaptor and Audio L and R Select the COMPONENT input from the Input Selection Menu see page 15 e Installing the Front Plate Note A glass carrier suction lifter is required Checking back box prior to installation of front plate Before commencing the installation of the front plate the polystyrene blanking panel must be removed from the back box The next step is to ensure that the appropriate cables and their all of the connectors are present within the back box flange must 51 ae be cleaned It is important to ensure that the flange inside the back box is cleaned using a grease removal agent and allowed to dry The space between the back box and front plate must be even on all four sides If the flange needs to be straightened this must be done before proceeding any further This is very important as any damage will affect the unit s waterproofing capabilities Installati
33. isplay the time at the top right hand corner of the screen Press the button again to remove the display In Teletext mode press this button to select and hold or change a four digit sub page number This is displayed along the bottom of the screen Press the button again to exit this function REVEAL Press this button to display concealed text such as answers to quiz games Press the button again to remove the information from the display Stops the automatic page change which occurs if a Teletext page consists of two or more sub pages Stop symbol is displayed in the top left hand corner of the screen Press the button again to resume Ze Troubleshooting No picture or sound Make sure the AC power cord is connected to the power adaptor Make sure the DC power cord is connected to the TileVision Check for power failure f the red indicator is not showing press the POWER button on the remote control Screen is black Make sure the external signal source mode is selected Press the signal input button TV AV twv to change to TV Picture is OK but Press the Mute button on the full function remote control there is no sound Check another channel Press the button to increase the volume Check the speaker connections from the TileVision to the speakers Poor sound quality Make s
34. l from audio R input is sent to the left and right speakers Mono Sound Selection If the signal is weak in TV mode switch to mono by pressing the VII button twice on the standard full function remote control Listening in mono will reduce noise in comparison with poor stereo reception Press the I II 79 button twice again to switch back to stereo Clock Functions The clock can only be set in TV mode Setting the clock is necessary in order to use the various timer features of the TileVision You can set automatic On or Off time 1 Press the MENU button 2 Press the buttons to select the Setup menu and press the gt button to enter the Setup menu 3 Press the AW buttons to select Clock menu and press the gt button to enter the Clock menu Press the AW buttons to select the item you want to adjust and press the lt P buttons until the figures you want to adjust are highlighted in red Highlighted figures can be adjusted using the AY or number buttons 4 The present time must be set for any time function to work correctly Store a time value between 00 00 and 23 59 hours minutes 5 Press TV AV wai button to return to normal TV viewing Main Menu Picture Sound Special Setup Setup Auto programme Manual programme Programme edit Clock Language Setup Clock Clock 1 Off Time 1 On Time 1 On Volume 1
35. llent B a c k MENU Exit If you exit DTV Scanning without fully completing the channel searching procedure the TileVision may not have stored any digital TV channels With the New Service Message set to On a banner will be displayed when any new channels are added eee General Programme Information The programme information banner is always displayed at the bottom of the screen for a preset period of time whenever you switch channels 1 BBCONE 13 21 National News oD Now gt gt 13 00 13 30 SUBTITLE OFF You can view the programme information at any time by pressing the OK ex button while watching a programme The banner will Banner Display Time You can choose a banner display time of 3 5 or 10 seconds 1 Press the MENU button to display the Main Menu en clckblbbobllblbllbr iWllllllsllbssss rlrLbLLsD bL LILLLILLILITE Main Menu be cleared from the screen after the preset time 5 Use the gt button to enter DTV Setup Sound Detailed Programme Information Special You can see more detailed information about the current DTV System programme at any time by pressing the INFO G button Subtitle Language English Audio Language English 11 BBC ONE 2 13 21 National News 3 4 G C9 Now gt gt 13 00 13 30 SUBTITLE OFF National and international news from t
36. nal input 1 Make sure all the necessary connections have been made 3 Press the TV AV wav button to select the required external input SCART COMPONENT S VIDEO or HDMI 4 After a short delay the desired input will be selected and the menu will be cleared from the screen COMPONENT to SCART adaptor must be used Input Selection to enable COMPONENT video connection see 3 9 page SCART COMPONENT S VIDEO HDMI You can display the programme information and settings status currently in use Sound Mode Mono 1 Press the OK button Dynamic Flat lt gt Auto 5 Press TV AV wav to exit the menus and confirm settings Picture Sound Special Setup Main Menu TILEVISION Picture Colour Temperature Contrast Brightness Colour Sharpness Sound Equalizer Balance AVL SRS WOW Special N R Blue Back Auto Sleep Child Lock ARC Setup Auto programme Manual programme Programme edit Clock Language Colour Temperature Standard Reddish Greenish Bluish User Auto Programme Country Great Britain System BG Storage From 1 Start Manual Programme Programme 1 System I Channel V UHF 55 Name BBC 1 Finetune 0 Memorize Programme Edit Delete Favourite Move Skip Language English Norsk Deutsch Svenska Francais Romaneste Espanol Polski Italiano
37. on of the front plate Remove the front plate from its packaging and place the remote control to one side Introduce the lower front edge of the unit into the box and fit the earth straps to the two Earthing screws as indicated by the green labels on the rear of the front plate Connect all cables to their respective sockets refer to pages 5 to 9 of these instructions The next step is to remove the soft adhesive protector from the top length of special Velcro and press the front plate into the back plate it may be necessary to adjust the position of the cables to achieve a good fit The unit installation must comply with all relevant electrical safety regulations before turning the mains supply to the 12VDC power adaptor on using the remote pull switch The unit should now show a red indicator light showing that it is in standby mode The next step is to tune the unit as detailed on pages 17 to 20 and 22 Once you are satisfied that the unit is tuned and working correctly press the Power 0 1 button on the remote control to put the unit in standby mode and isolate the unit using the remote pull switch Gently remove the front plate using a suction lifter Do not use a lever to remove the front plate as this will invalidate your guarantee Next remove the self adhesive protectors from the side and bottom Velcro strips and press the front panel into the back box with reasonable force Take care to apply forc
38. ontrol sliding cover Earthing Points The Earthing connection points are found on the rear of the front plate and are clearly marked with green labels Connect the earthing cables from the back box to these points Power Socket The Power socket 1 is located at the extreme left of the connection array Speaker Connections The speakers should be connected after the Speaker Connection Block Earth straps to the rear of the front plate as detailed on page 10 of these operating instructions The speaker connection block is found on the right of the rear of the front plate Lift one of the lugs push one conductor of the speaker lead into the connector release the lug and give the lead a slight pull to make sure that it is gripped correctly The other wires are connected in the same way Note To ensure that the speakers are in correct phase the conductor with the stripe should be connected to the negative terminal L or R and the plain conductor should be connected to the corresponding positive terminal L or R Connections to the speakers terminals should be made in the same way striped conductor to the negative terminal and plain conductor to the positive terminal Antenna Feed The Antenna input jack is found at the extreme right of the connection array refer to page 7 A minimum signal level of 60dBu 1mvV is required to avoid a noisy picture Additional connections Connectors for HDMI SCART S VIDEO an
39. sion Connector Inputs Connecting to your TileVision Connecting an Antenna or Cable Sky Remote Control Link Setup Connecting to the HDMI and S VIDEO Inputs Connecting to the SCART Input Installing the Front Plate The Waterproof Remote Control The Full Function Remote Control Switching the TileVision On Off Selecting your On screen Language Selecting a Picture from External Sources Displaying Information TV Mode On screen Menus and Displays TV Mode Tuning Setup and Editing Analogue TV Programmes Auto Programme Tuning Setup and Editing Analogue TV Programmes Manual Programme Tuning Setup and Editing Analogue TV Programmes Edit Delete Select Programmes Tuning Setup and Editing Analogue TV Programmes Moving and Skipping Programmes Auto Tuning Digital TV Digital TV Programme Information General and Detailed Programme Information Silicone Sealant produces acetic acid during B iM eus _ 1 2 Use only well ventilated areas Irritating to eyes Digital TV Setup Audio Language Wash hands after use and before meals Wash Digital TV Setup Common Interface splashes from skin clothing and other surfaces Use Digital TV Basic Operation Signal Strength a clean cloth In case of contact with eyes wash Digital TV Basic Operation Software Update immediately with plenty of water Digital TV Basic Operation Selecting a Menu Language Digital TV Basic Operation
40. tch your TileVision to standby press the POWER button again Selecting your On screen Language When you start using your TV for the first time select the language in which to display all on screen menus 1 Press the TV AV fm button to display the Input Selection menu Press TV AV vai repeatedly until TV mode is selected After a short delay the desired input will be selected and the menu will be cleared from the screen 3 Press the buttons to select the Setup menu and then press the gt button Main Menu 4 Press the buttons to select the Language menu and then Picture press the gt button Sound Special 5 Press the AV lt P buttons to select your desired language Setup M All the on screen displays will now appear in the selected language Language English Norsk The language selected applies to both TV and Deutsch Svenska 5 DTV modes Frangais Romaneste Espanol Polski Italiano Nederlands EAAHNIKA Dansk Hrvatski Selecting a Picture from External Sources 65565 If external sources have been connected to your TileVision you can view any of the sources by selecting the appropriate exter
41. that the channels can be arranged in their preferred order 5 To change the order of favourite channels Highlight the channel that you want to move with the AW buttons and press the 4 button to select the channel The channel name will go grey to show it has been selected 6 Use the buttons to choose a new position for the selected channel and press the button to insert the channel in it s new position in the list Press the gt button to cancel moving a channel that has been selected 7 Press the TV AV fm button to return to normal TV viewing When user profiles have been defined they can be accessed by pressing the PROFILE button when the General Programme Information banner is displayed Select Profile 3 ITV1 15 22 Rosemary Thyme Next gt gt 16 00 17 00 des OFF SUBTITLE OFF Picture Control ee You can adjust Colour Temperature Contrast Brightness Colour and Sharpness to the levels you prefer Manual Picture Control 1 Press the MENU button 2 Press the buttons to select the Picture menu and then press the button 4 Press the buttons to select a particular colour tone If you select User you can control the value manually Press the lt P buttons to select the colour R G or B to adjust and press the AW buttons to adjust the value Press the lt P buttons until no colour is selected 6 Press the A V buttons to select a picture item
42. tions must be made prior to sealing the front plate into the back box GGND RGB Green Ground j SCART Pinouts CLKOUT Clock Out solder side view A For HDMI Input l DATA Data Out RGND RGB Red Ground DATAGND Data Ground C SCART to RCA adaptor Composite Video Audio L R B For S VIDEO Input R RGB Red BLNK Blanking Signal D SCART to COMPONENT 1 Connect the S VIDEO RCA and audio L R cable to the inputs on the TileVision and outputs VGND Composite Video Ground adaptor Y Pb Pr on the external equipment such as a VCR camcorder and some video game devices BLNKGND Blanking Signal Ground amp B For S VIDEO Input Video Game Console AN Oak WD 1 Connect the HDMI cable to the HDMI input on the TileVision and output on the external equipment such as satellite receiver or HD DVD player VOUT Composite Video Out 2 If the external equipment has mono audio output connect it only to the left socket of the Audio VIN Composite Video In Input Output SHIELD Chassis Ground Cable Shield HDMI Input from PC The EURO SCART socket can be connected to equipment with RGB or composite video inputs and outputs A VCR satellite or cable receiver DVD player or video game console should be connected using the EURO SCART connection The EURO SCART socket is fully connected as shown above audio output from the EURO SCART be connected to a separate amplifier to allow t ee a
43. ure the channel is broadcasting in stereo Press the I II button to Select Mono The sound quality of a stereo broadcast may be poor in a weak signal area See Sound Output Selection on page 36 No image on a Make sure the channel selection is correct specific channel Change the antenna direction to the right or left Adjust the fine tuning of the channel Image is not stable Adjust the fine tuning of the channel and may appear to Make sure there is no powerful electromagnetic wave interference vibrate horizontal from the transmitting station bars appear Stop using a hair drier electric drill or electric blender No colour on a Check other channels to see if the specific channel is broadcasting specific channel a black amp white program a black amp white image Adjust the colour See page 33 Black or white dots Make sure the antenna is connected correctly See page 7 appear on all Make sure the status of the antenna or wire is good Adjust the fine tuning of the channel channels or a specific channel Produced by digiSET 01772 828083 Specifications z Model TV 17 FR5 PS TV 23 FR3 PS External Dimensions W x H x D 483 mm x 353 mm x 75 mm 630 mm x 450 mm x 90 mm Total Weight complete with back box 12 Kg 16 Kg Requirements 12 VDC 6 67 A 24 VDC 5 42 A Power Consumption 72 W max standby below 3 W 116 W max standby below 3 W AC D
44. ying the Teletext Information gt 1 Press the TEXT button once to display the Teletext pages 2 Use the 0 9 number buttons and the Red Green Yellow and Blue FastText buttons to navigate the text pages 3 Press the TEXT button again to switch Teletext off and return to normal viewing The waterproof remote control does not include any extended Teletext functions To use all of the Teletext options the buttons beneath the sliding cover on the full function remote control must be used The table below gives a complete explanation of each of the Teletext buttons on the full function remote control oeeoct Functions Press the button to turn Teletext on or off In Teletext mode press the button to superimpose the text page over the TV picture press again for normal Teletext mode Selects double height text Press button to enlarge top half of the page Press again to enlarge the bottom half of the page Press again to return to normal size text Button Press to return to the index page 9 UPDATE Displays the TV picture on the screen while waiting for the new Teletext page The display will appear at the top left hand corner of the screen When the updated page is available then the display will change to the page number Press the UPDATE button to view the updated Teletext page When viewing a TV programme press this button to d
Download Pdf Manuals
Related Search