Full Color Animation laser Light User Manual
Contents
1. Full Color Animation Laser Light User Manual Unpacking Check Thank you for using our products For the sake of safety and better operation of this projector please read this manual carefully before using and operating it lest incur any personal injury or damage to the projector Package List 1 Projector 1pc 2 AC Power Supply 1pc 3 User s Manual 1pc 4 SD card 1pc Notice 1 Please operate the projector according to the Manual strictly 2 This unit is intended for indoor use only and should be prevented from water moisture and shake 3 The working temperature of this unit is 15 30 C 60 86 F and it must be powered off after continuously working for 2 hours in order to let the laser diode to cool down 4 Keep the body of this unit clean in order to avoid any unnecessary troubles 5 Do not turn on and off the device frequently and try to avoid making it work for a long time 6 Do not use the telescope to watch the laser rays otherwise it will large the dangers 7 It is recommended to use the original package during the transportation Warnings 1 The grade of the laser is Class Ill A and to observe directly in the beam is dangerous 2 The operational Voltage is 100 240VAC 50 60Hz and once exceeded this range its lifetime can be shorten Statement All the projectors are examined strictly before shipment and the user should operate it according to the manual strictly We and the distributor will not be responsible fo2. he file in PRG format Program list is composed of document name play speed and day times by using a comma between them Use one raw to edit a program For example one program is composed like ab1 ild ab2 ild ab3 ild of files The file ab1 ild play speed is 1sK secord replaying 3times ab2 ild play speed is 20K second playing 1 time ab3 ild play speed is 18K second replaying 4 times Content as below ab1 ild 15 3 ab2 ild 20 1 ab3 ild 18 4 6 This system only supports ild format files namely files with expanded name ild Display Mode Status And Operations Program Table KeySeek Audio Mode Auto Mode System Set Folder Select 1 Power on and insert SD card Press slightly the MODE key that the LCD shows Program Table Then press ENTER key to play the images inside the SD card in auto mode If you need switch to next function please press slightly the MODE key to go back to primary menu 2 Press slightly the Mode key that the LCD shows Key Seek Then press ENTER key Here just press UP key or DOWN key to choose the desired images 3 Press slightly the MODE key that the LCD shows Audio Mode Then press ENTER key Now it s sound active mode to play the images saved by IC card inside the product previously If you need switch to next function please press slightly the MODE key to go back to primary menu 4 Press slightly the MODE key that the LCD shows Auto Mode Then press ENTER key Now it s auto mode to
3. play the images saved by IC card inside the product previously If you need switch to next function please press slightly the MODE key to go back to primary menu 5 Press slightly the MODE key that the LCD shows System Set Then press ENTER key to choose Color Mode Set Press ENTER key Now press UP key and DOWN key to choose unicolor bicolor or tricolor Press ENTER key Press UP key and DOWN key to choose sound active Set Press ENTER key Now press UP key and DOWN key to set the sensitivity of sound active Press ENTER key Now press UP key and DOWN key to choose Phase Set Press ENTER key Press UP key and DOWN key to choose X Y or X Y 6 Press slightly the MODE key that the LCD shows Folder Select to choose folders in SD card Then press ENTER key Press UP key and DOWN key to choose the desired folders Then press ENTER key to play the images of desired folders
4. r any mistakes cause by the wrong operations Specification 1 Power Supply Input 100 240VAC 50 60Hz Output 15VDC 1000mA 15VDC 500mA 2 Laser Generator Wavelength 532nm Green 660nm Red 405nm Purple 3 Dimension 195 5x141x112 5mm 7 3 4 x 5 1 2 x 4 4 8 inch 4 Net Weight 1 06kg 2 32Lb 5 Gross Weight 1 28kg 2 81Lb Panel 1 Microphone 2 Laser Aperture 3 Fan 4 On Off 5 SD card jack 6 Knob Sonic Sensitivity Adjustment 7 Power jack 8 Menu Key Enter Up Down Mode 9 LCD 10 SD Card Can save self edited images SD card Laser Control System Function instruction 1 This system only supports FAT32 system You need to format it as FAT32 system when using a new SD card 2 This system only supports short named folders Each folder name and expanded name is only combined with words or digits A folder name is no more than 8 digits and an expanded name no more than 3 digits ex abcde123 jpg 3 Use only the SD card for this machine with the built in program rar The software is operational after approval from anti virus software and its probative version 4 When setting up a new folder you need to set up a PRG file inside which is named the same with the folder and save all files in the PRG File Also the play speed is Key seek speed For example set up AA PRG file program list under AA folder 5 Program list Users can use the Text Editor to edit the program list but you must save t
Download Pdf Manuals
Related Search