E220 User Manual (Windows)
Contents
1. When you select Auto search and register the terminal product can automatically search and register to a supplied network Manual Search and Register 1 Select Manual search and register 2 Click Refresh 3 Select an operator name in the list 4 Click Register Connection Profile Settings To display the Dial Up interface you can do as follows 1 Choose Tools gt Options 2 In the navigation tree click Profile Management 3 Click the Dial Up tab Note For details about setting the profile contact your service provider Creating a Dial up Profile 1 Click New to set the profile name access number user name password Access Point Name APN and APN status and select a default device 2 Click Advanced to set the IP information authentication protocol Domain Name Server DNS and Windows Internet Name Service WINS Click OK to save the advanced settings and return to the Dial Up interface Click OK and the Prompt dialog box is displayed 5 Click Yes to save the settings or click No to cancel the settings lies Editing a Dial up Profile 1 Inthe Profile Name drop down combo box select a setting 2 Click Edit to modify the profile name access number user name password APN name and APN status and select a default device 3 Click Advanced to set the IP information authentication protocol DNS and WINS 4 Click OK to save the advanced settings and return to the Dial Up interface 5 Cli2. you enter wrong PIN codes for a preset number of times the SIM USIM card is locked and you cannot use it until you enter the PUK code The Wireless Broadband prompts you the remaining number of attempts for entering the PIN code or the PUK code Unlocking the PIN 1 When the SIM USIM card is locked the Unlock PIN dialog box is displayed after you start the Wireless Broadband 2 Enter the correct PUK code 3 Enter the new PIN code 4 Click OK to complete the modification Choosing a Device The Wireless Broadband can support different terminal products When the Wireless Broadband is launched it searches the matched terminal automatically If two or more terminals are found the connected terminals are displayed on the Choose Device interface You can choose a terminal to run and click OK If two or more supported terminals are connected with the PC you can change or choose a device during the running of the Wireless Broadband 1 Choose Tools gt Choose Device 2 Select a device in the device list 3 Click OK to terminate the current terminal and switch to the selected one Viewing Diagnostic Information Choose Tools gt Diagnosis to view the information of the Wireless Broadband and SIM USIM card such as the number of messages and contacts saved in the SIM USIM card firmware version hardware version and IMSI number 16 Note The number of messages contacts in the SIM USIM card is displayed as XX YY XX m
3. E E T T Important Draft Deleted and Reports ccccecescesesseseseeseeeeseeeseeecseeseeeseeeeseeeeseereaeees 7 Viewing a Message in the SIM USIM Card s sssssssssesssssssssrssssrssrerssrssrerrsrerrsrrrsresrerese T Text Message Settings 23 22 sieves NE N O nowieienar eats 8 eN AOINE eO E resect rite ceria eine 10 Descriptions of the Wireless Broadband GUI Launch the Wireless Broadband To launch the Wireless Broadband double click the shortcut icon of the Wireless Broadband on the desktop Note e Ifyou are required to enter the Personal Identification Number PIN code enter the correct one and click OK If you fail to enter the correct PIN or PIN Unblocking Key PUK code the network related functions are unavailable e Contact your service provider for whether a Subscriber Identity Module SIM UMTS Service Identity Module USIM card is needed e The SIM USIM card is supplied by the service provider For details contact your service provider Interface Overview Shortcut Icons The following table lists the shortcut icons provided by the Wireless Broadband Click To Display the Connect interface Query the statistics of the transferred data K iE Display the Text interface Display the Phonebook interface aN La Status Information The following table lists all the possible status information Status Information Description Network signal Indicate the s
4. IM card are moved to the local inbox and the sent messages in the SIM USIM card are moved to the local outbox Text Message Settings Choose Tools gt Option and click the Text Message folder Text Message Alerts Settings In the Text message handling area you can select the visual prompt and audio prompt Option Description Show a notification When there is a new message a dialog box is displayed when a new text Then you can message arrives e Click View to view the new message Click Close to view the message later Play a sound when a e Click Browse to select a sound file new text message Click Test to play the sound click Stop to stop playing arrives the sound When there is a new message the selected sound is played Note The sound file must be a wav file Setting the Text Centre SMSC Number and Message Validity The information of text centre number is provided with the SIM USIM card When the SIM USIM card is inserted the information is changed automatically If the information is null or you delete the information by accident contact your card provider The message validity is the period for storing messages in the text centre including such options as 12 hours 24 hours 30 days and Maximum Requesting a Delivery Report You can select Request delivery report to enable the delivery report function When the function is enabled the network can deliver a status report of the sent message Pho
5. Wireless Broadband provides several interface languages for you During the running of the software you can choose Tools gt Language to switch the languages PIN Operations If a SIM USIM card is used in your terminal the Personal Identity Number PIN code protects your card from unauthorized use You can modify the PIN code and enable disable the PIN verification Note The PIN code and PIN Unblocking Key PUK code are provided along with your SIM USIM card For details contact your service provider Enabling Disabling the PIN Verification You can enable the PIN verification If it is enabled you need to verify the PIN code when launching the Wireless Broadband again e To enable Choose Tools gt PIN Operations gt Enable PIN Verification e To disable Choose Tools gt PIN Operations gt Disable PIN Verification Modifying the PIN Code 1 Choose Tools gt PIN Operations gt Modify PIN 2 Inthe Modify PIN dialog box enter the current PIN code and the new PIN code 3 Enter the new PIN code again 4 Click OK to complete the modification Note The PIN code should be a numeric string of 4 8 digits 15 Entering the PIN Code When the PIN verification is enabled you need to enter the correct PIN code to use the network related functions 1 After the Wireless Broadband is launched the Enter PIN dialog box is prompted 2 Enter the correct PIN code 3 Click OK to complete the verification Note If
6. Wonderful Communication Mobile Life Wireless Broadband User Manual Copyright 2007 Huawei Technologies Co Ltd All Rights Reserved No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co Ltd Trademarks w wawe and HUAWEI are trademarks of Huawei Technologies Co Ltd All other trademarks mentioned in this manual are the property of their respective holders Notice The information in this manual is subject to change without notice Every effort has been made in the preparation of this manual to ensure accuracy of the contents but all statements information and recommendations in this manual do not constitute the warranty of any kind expressed or implied Contents 1 Descriptions of the Wireless Broadband GUI Launch the Wireless Broadband Interface Overview sosia e A SE nase Aare a enemies 1 DIIMETMELSELVICES eter reer ee 3 Accessing the Imtemet icc ss ssssseasienceacsseveevesagiecsstonntasece teavssspvbaneentee E ERRER 3 Statistics Informations csssssivevesecssssvassveesceeytavesassduevssscssserasnavesceasisdecassdeateseessvaca svedeasssadsia 3 Sexe Message comer steet a EEE EUS TIN ELSE EE Fa oT EEE ETE SO 5 Creating and Sending a Message sseseeeeeseresseeesresresesresreresresteresroresrortoresesresreresreseeres 5 TOR acest east eee Neca arate lees aaa ea cant Ba cae tas ee ae A ike reas anaes ras 5 QUE OX EPEE EEPE
7. ck OK and the Prompt dialog box is displayed 6 Click Yes to save the settings or click No to cancel the edits Deleting a Dial up Profile 1 Inthe Profile Name drop down combo box select a setting 18 2 Click Delete and the Prompt dialog box is displayed 3 Click Yes to delete the setting or click No to cancel the deletion Importing a Dial up Profile 1 Click Import and the Import interface is displayed You can choose the following options e Select the 3G GPRS network operator s in the list e Click Browse and choose a prof file to import Then click Open 3 Inthe Import interface click OK Exporting a Dial up Profile 1 Click Export and the Export interface is displayed 2 Select one or more network operators and click OK 3 Select the path to save the file and enter the file name Then click Save Note The dial up profile of the selected operator is exported to a prof file a configuration file 19 FAQs What shall do if cannot access the Internet 1 Check the network signal strength 2 Check whether you have activated the wireless online service You can ask the local network operator on how to activate it 3 Ifthe wireless online service is activated check network settings according to the instructions in Internet Services on Page 3 Why only part of the pasted content can be displayed during the edit When editing a message at most 2048 characters can be entered If the qua
8. ck the shortcut icons above the contact list to perform the following operations Ez Edit the selected contact EX Delete the selected contact 3 Send a message or name card to the mobile number of the contact Group Management You can create a group to manage the local contacts by category Creating a Group You can create a group to manage local contacts by category 1 Right click Local in the navigation tree and choose New Group 2 Enter the group name Note The group name cannot be null or identical to any existing one e You can manage only local contacts by group Modifying a Group Name 1 Select a group to modify 2 Right click the selected group in the navigation tree and choose Rename Group 3 Enter the new group name Note You cannot rename the two default groups Local and SIM USIM Card 11 Adding a Contact You can add a contact from Local to another group as follows 1 Select one or more contacts in Local 2 Drag the selected contacts to another group Note When you drag the selected contact s if you press and hold Ctrl the contact s can be copied to another group otherwise the contact s are moved to another group You can add a contact to a group as follows 1 Select a group in the navigation tree G 2 Click El or right click in the contact list and choose New Contact 3 Enter the information Removing a Contact 1 Display the contact list
9. e and send it to the message sender Forward Forward the message to another person Save Number In the New Contact interface enter other information and save the contact Delete Delete the message Delete All Delete all the messages in the inbox Note e You can press and hold Shift or Ctrl and click the selected messages or you can press Ctrl A to select all the messages in the list The messages deleted from the inbox are stored in the Deleted box e You can forward only one message a time You can also click the shortcut icons above the message list to perform the following operations Sa e BS Reply the selected message ing G CX Forward the selected message u 7 Ex Delete the selected message Outbox Outbox stores the sent messages including the messages sent both successfully and unsuccessfully To display the Outbox interface do as follows v 1 Click J to display the Text interface 2 Choose Local gt Outbox to display the Outbox interface Note For details refer to Inbox on page 5 Important Draft Deleted and Reports Important stores your important messages Draft stores the drafts of messages Deleted stores the messages deleted from the local mailbox Reports stores the delivery notifications after sending messages Note e For details refer to Inbox on page 5 The Deleted box does not store the messages deleted from the SIM USIM card e Ifyou del
10. eans the number of messages contacts and YY means the capacity of the SIM USIM card e The diagnostic information is subject to the terminal that is used Startup Settings You can set the Wireless Broadband to launch automatically along with Windows and minimize the interface after the startup Choose Tools gt Options Click General in the navigation tree You can choose the following options Select Launch on Windows startup The Wireless Broadband launches automatically along with Windows e Select Minimize window on startup The interface of the Wireless Broadband is automatically minimized after the Wireless Broadband is launched 4 Click OK to complete the settings e Ne Network Settings To display the Network interface you can do as follows 1 Choose Tools gt Options 2 In the navigation tree click Network Selecting a Network Type You can select different network types to quickly search and access the network Click the Network Type tab In the Network Type drop down combo box select the corresponding network type In the Band down drop list box select the corresponding frequency band Click Apply Click OK to save and enable the settings Cnr Go E Selecting a Registration Mode You can set the searching and registration mode after selecting the network type 1 Click the Registration Mode tab 2 Select Auto search and register or Manual search and register 17 Auto Search and Register
11. ete the messages in the Deleted box the messages will be deleted permanently Be cautious with your operation Viewing a Message in the SIM USIM Card If a SIM USIM card is used in your terminal you can save the sent and received messages in the SIM USIM card The operations to the messages in the SIM USIM card are as same as those to the messages in the local message box For details refer to Inbox on page 5 Note e Contact your service provider for whether a SIM USIM card is needed The SIM USIM card is supplied by the service provider For details contact your service provider e If your terminal does not need a SIM USIM card you can save the sent and received messages in the terminal The operations to the messages in the terminal are as same as those to the messages in the SIM USIM card You can move a message from the SIM USIM card to the local inbox or local outbox v Click na to display the Text interface 1 2 Click the SIM USIM tab 3 Select one or more contacts in the contact list and right click 4 Right click the selected message s for the following options e Move to Local Move the selected messages from the SIM USIM card to Local e Move All to Local Move all the messages from the SIM USIM card to Local 5 In the Confirm dialog box click OK Note e When the messages in the SIM USIM card are moved to Local the messages are deleted from the SIM USIM card e The received messages in the SIM US
12. ics Information You can use the Statistics function to check the traffic of the network Viewing the Statistics Information You can do as follows to view the statistics information Click to display the statistics interface 2 Inthe navigation tree click the following tabs to display the corresponding diagram e Transfer View the uploaded downloaded speed and data of the current connection e Statistics View the current connected duration last reset time and daily monthly yearly uploaded and downloaded data Note The statistical data of the traffic is only for your reference The actual traffic information is accounted on the basis of the traffic data collected by the operator Resetting the Statistics Information You can operate as follows to reset the statistics information 1 In the navigation tree right click a tab 2 Choose Reset Statistics 3 In the Confirm dialog box click Yes Text Message The Wireless Broadband provides Text message services The local mailbox can store the messages without capacity limitation and can be easily managed Creating and Sending a Message v 1 Click J to display the Text interface Click to display the New interface Enter the recipient number by one of the following options Click Send To Then select a phone number in the Select Number interface Enter the recipient number directly Enter the message content After the edit you can choose the following
13. ignal strength of the network by the following icons Tull Network information Display the profile of the current network New message If the Text message handling is enabled when there is a new message e In the status bar the icon flashes On the lower right corner of the PC screen the Prompt dialog box is displayed Unread message When there is an unread message e In the status bar the icon flashes e When you move the cursor to the icon the number of the unread message s is displayed Network connection The information of the network connection e ke The network is connected e Ee The network is disconnected Transferred data 4 Data download is in progress t Data upload is in progress Internet Services Accessing the Internet After setting the network and connection profiles you can access the network through the Wireless Broadband You can do as follows to connect the network os 1 Click to display the Connect interface 2 Select the network type and a correct profile 3 Click Connect to set up the connection 4 Launch the browser on the PC to access the internet Note e When the connection is established the statistics interface displays the details of the current network including connected duration data statistics transferred rate and so on When the connection is established click Disconnect to disconnect from the network Statist
14. nebook You can manage contacts in the phonebook conveniently by the Wireless Broadband Phonebook Management in Local You can do as follows to enter the local phonebook i EYT 1 Click gt to display the Phonebook interface 2 Click Local in the navigation tree Creating a Contact 1 Click z to display the New Contact interface 2 Enter the information 3 Click OK to save the contact Note The contact information cannot be null or contain spaces or new line characters only Searching a Contact Click Q Then enter the contact information Note e You can enter part of the contact information to search Each field of the contact can be supported e When you search the contact the contact list is updated automatically according to your entered information The matched contacts in the searched group are displayed None is displayed when no matched contact can be searched in the group 10 Viewing a Contact You can view a contact as follows 1 Enter the local phonebook select a contact to view 2 Click the selected message The contact name mobile number office number home number E mail address and remarks are displayed below the contact list 3 Right click the selected message and you can do as follows Edit Contact Change the information of the contact Delete Contact Delete the contact Send Send a message or name card to the mobile number of the contact You can also cli
15. ntity of the pasted information exceeds the limit the exceeding part will be deleted automatically When a message is received no prompt is displayed Why You have not set the vision alert of messages Choose Tools gt Options gt Text message handling In the Text message handling area select Show a notification when a new text message arrives Why the phone number cannot be pasted A valid phone number can only contain 0123456789 Confirm that no other character is in the cut or copied text 20 F Acronyms and Abbreviations Numerics 3G The Third Generation A APN Access Point Name D DNS Domain Name Server G GPRS General Packet Radio Service GSM Global System for Mobile communications P PIN Personal Identification Number PUK PIN Unblocking Key S SIM Subscriber Identity Module U USIM UMTS Service Identity Module WwW WINS Windows Internet Name Service 21
16. of a group 2 Select a contact to remove 3 Right click the selected contact and choose Remove from Group Note The contact is removed from the group but not deleted Deleting a Group 1 Right click a group in the navigation tree and choose Delete Group 2 Click OK Note When you delete a group contacts in the group cannot be deleted They are still in the phonebook of Local or in other groups Phonebook Management in the SIM USIM Card You can save the contacts in the SIM USIM card The operations on the contacts in the SIM USIM card are similar to those on the contacts in Local For details refer to Phonebook Management in Local on page 10 12 Note e Contact your service provider for whether a SIM USIM card is needed The SIM USIM card is supplied by the service provider For details contact your service provider e If your terminal does not need a SIM USIM card you can save the contacts in the terminal The operations to the contacts in the terminal are as same as those to the contacts in the SIM USIM card Import Export You can export the contacts from Local or the SIM USIM card to a esv file and import the contacts from a esv file to phonebook in Local or the SIM USIM card Note In the local phonebook select one or more contacts Drag the contact s to the SIM USIM card in the navigation tree Then the contact s are exported to the phonebook of the SIM USIM card Importing Contacts Y
17. options Click Send To send the message Click Save To save the message in the draft e Click Close To exit from editing the current message If you click Yes in the Confirm dialog box the message can be saved in the Draft cA ee wD Note e You can group send a message to up to 20 phone numbers Each number should be separated by e You can enter up to 2 048 characters in a message each time Inbox Inbox stores the received messages To display the Inbox interface do as follows v 1 Click J to display the Text interface 2 Choose Local gt Inbox to display the Inbox interface Searching a Message Click Q Then enter the name phone number of the message sender part of the message content Note e You can enter part of the message content to search e When you search the message a list of the matched messages is updated automatically according to your entered information The matched contacts in the searched group are displayed None is displayed when no matched message can be searched Viewing a Message You can view a message in the inbox as follows 1 Display the Text interface and select a message to read 2 Click the selected message The name and phone number of the message sender message content and receiving time are displayed below the message list 3 Right click the selected message for the following options Edit Re edit the message e Reply In the Edit interface re edit the messag
18. ou can import the contacts from a esv file to the local phonebook or the SIM USIM card FS i JA Click to display the Phonebook interface 1 2 Click Local or SIM USIM in the navigation tree 3 Right click the contact list and choose Import 4 Choose a file to import Click Open to display the Map interface 5 Drag the value in the file to the corresponding field on the right respectively 6 Click OK Note The maximum number of contacts that can be saved in the SIM USIM card is subject to the capacity of the SIM USIM card e When you import contacts to the SIM USIM card if its capacity is full the import stops automatically The content of the imported contacts is not affected 13 Exporting Contacts You can export contacts from the local phonebook and the SIM USIM card The exported contacts can only be saved in a csv file 3 Click to display the Phonebook interface Click Local or SIM USIM in the navigation tree Choose one of the following operations Right click the contact list and choose Export All Contacts e Choose one or more contacts and right click to choose Export Selected Contacts 4 Choose the path to save the contact s 5 Enter the file name and click Save ewWwWNre Note You can press and hold Shift or Ctrl and click the selected contacts or you can press Ctrl A to select all the contacts in the list 14 Settings and Information Query Switching a Language The
Download Pdf Manuals
Related Search