Use of Adhesives on Hard Hats
Contents
1. Bullard It s your life and you re worth it Head Protection Respiratory Protection Fire and Rescue Safety Thermal Imaging Use of Adhesive Stickers and Other Marking Methods on Bullard Hard Hat Shells The use of self adhesive stickers by individual users to personalize their hard hats or for other marking or identification purposes is a common practice Because of the type of adhesive used in typical pressure sensitive stickers there is very little potential for chemical interaction between the adhesive and the helmet shell and their use would not be expected to negatively affect the performance of the helmet under normal conditions If one chooses to however the adhesive stickers should be placed at least 3 4 away from the edge of the helmet and the area of the helmet covered in this way should be kept to a practical minimum to permit regular inspection of the helmet shell for signs of damage from use or aging If any surface cracks however small should appear on the shell surface either in the vicinity of the stickers or elsewhere the helmet should be removed from service and replaced immediately The practice of engraving identification data on the underside of the brim of the helmet will not adversely affect the helmet s performance however this engraving must be restricted to the brim only Any engraving or modification of the helmet shell material in the crown area above the intersection2. between the crown and brim or in the vicinity of the suspension key sockets may result in failure of the helmet to provide protection in an impact and could result in injury or death The best practice is always to use the helmet as it was received from the manufacturer or to consult the manufacturer before making any product modifications Bullard s advanced pad print technology allows for printing of crisp clear custom logos of up to six colors in up to eight locations on the hat Pad printed logos are permanent and will not peel crack or fade like decals or stickers Bullard does not have any set up artwork or proofing charges for decorated hats and can pad print custom logos on any model For additional information contact Bullard Customer Service at 877 BULLARD 285 5273 Bullard Bullard GmbH 1898 Safety Way Hochkreuzallee 36 Cynthiana KY 41031 9303 53175 Bonn Bad Godesberg Toll free 877 BULLARD 285 5273 Germany Tel 859 234 6616 Tel 49 228 931933 0 Fax 859 234 8987 Fax 49 228 931933 50 www bullard com Technical Bulletin ISO 9001 certified 2004 Bullard All rights reserved Bullard is a registered trademark of Bullard It s your life and you re worth it is a trademark of Bullard 8047 0604
Download Pdf Manuals
Related Search