Nexio Delay User Guide
Contents
1. Syncing Soft Sync NEXIO Delay S 33 User Guide You can perform a sync in one of three ways m Soft Sync The user checks the Soft Sync box and the system automatically adds or deletes frames to or from the recording to gradually re sync the playout A Soft Sync occurs at a pace that allows it to go unnoticed on the playout monitor Hard Sync The user clicks the Sync button and drifted frames are added or deleted instantly to sync the play out A hard sync happens immediately and is noticable on the playout monitor a SOM Fix The system syncs frames automatically according to the parameters set on the Setup form under SOM Fix To perform a soft sync check the Soft Sync box for the channel you want to sync Record Duration Auto Start Wine l i a 15 31 50 I v Channel Delay Control Soft Sync Difference SQA 104 norlab harris local 2 00 00 11 ay Stop v Choose Server Do not use soft sync if the clip being recorded and played out includes compressed audio Once you check the Soft Sync box the system immediately syncs the frames that have drifted You cannot set parameters for a soft sync or a hard sync If you want to set parameters such as the number of frames that are allowed to drift or the amount of time that can lapse between frames you can use SOM Fix 34 B Chapter 4 Using NEXIO Delay Hard Sync To perform a hard sync click the Sync button for the channel you want to sync NEXIO2. a Channel SOA 104 narlab harris lacal 1 SOA 104 narlab harris lacal 2 Over time frames in a delayed recording may drift so they are out of sync If you want to sync frames to correct the drift you have two options 24 Chapter 3 Understanding the UI Remote Browser Soft Sync The system syncs frames automatically according to the parameters you set on the Setup form under the SOM Fix setting Soft Sync will slowly re sync the playout channel to the recording so that the viewer of the playback will not notice the slight playback speed change Hard Sync Click the Sync button Drifted frames are then added or deleted instantly to sync the playout Hard Sync makes an instant jump to the correct timecode position and therefore the viewer will likely notice the jump in the playback The Remote Browser window allows you to search for an available record or a playback server channel To search for a record channel launch the Remote Browser by clicking the button that is located to the right of the Record field To search for a playback channel launch the Remote Browser by clicking on the Choose Server label in the Channel column and then clicking the button You can search for an available channel by entering a range of servers in the From and To fields Select IP to search for an available channel by entering a range of IP addresses in the From and To field NEXIO Delay S 25 User Guide Remote
3. IconLogo IconStation IconKey InfoCaster InfoCaster Creator InfoCaster Manager InfoCaster Player InstantOnline Invenio Live Update mCAPTURE Magellan Magellan CCS Navigator Magellan Q SEE MultiService SDN NetPlus NetVX NewsForce Nexio G8 Nexio AMP ChannelView Nexio Channel ONE Nexio ClipSync Nexio Delay Nexio Digital Turnaround Processor Nexio Farad Nexio G Scribe Nexio IconKey Nexio IconLogo Nexio IconMaster Nexio IconStation Nexio InfoCaster Nexio InfoCaster Creator Nexio InfoCaster Manager Nexio InfoCaster Player Nexio InfoCaster Traffic Nexio InstantOnline Nexio mCAPTURE Nexio NewsForce Nexio NXIQ Nexio Playlist Nexio Remote Nexio RTX Net Nexio TitleMotion Nexio TitleOne Nexio Velocity ESX Nexio Velocity PRX Nexio Velocity XNG Nexio Volt OPTO Panacea Platinum Playlist Predator II GRF Predator II GX Punctuate Remote RTX Net QuiC Q SEE SD STAR Selenio Selenio 6800 SelenioNext Selenio X50 Selenio X85 Selenio X100 TitleMotion TitleOne Velocity ESX Velocity PRX Velocity XNG Versio Videotek SD STAR X50 and X85 are trademarks of Imagine Communications or its subsidiaries Altitude Express Connectus Enabling Pe
4. Browser v Server Name i Channel CH Name Type Search Now m Select LAN to search a group of servers on a single domain by WorkGroup name You can also use a text Filter to search by server name The search is performed on the start of the name Wild cards are not recognized Remote Browser IP DECAN v Server Name Channel CHName Type WorkGroup Harris Broadcast Filter NX Defaults Search Now Once you have set a range or defined a filter click Search Now A list of available channels displays within the range you searched 26 Chapter 3 Understanding the UI Search Now v Server Name SQA 34 SQA 34 NX3601HDI 39 NX3601HDI 39 NX1801NGC 729 NX1801NGC 729 NX1801NGC 729 aL Server IP Channel CHName Type 172 16 243 34 172 16 243 34 172 16 243 39 172 16 243 39 172 16 243 42 172 16 243 42 172 16 243 42 To select a channel click on a green row and click Select The server name and channel number will display on the NEXIO Delay window Record channel names will display in the Record field and Playback channels will display in the Channel column of the playback table Column Name Definition Server Name Lists the name of the server found by the search Server IP Indicates the IP address of the server Channel Indicates the channel number CH Name Indicates channel name Type Shows the type of server channel m Pindicates a player channel mg R i
5. Delay DelayWindow O Harris Broadcast Settings Insert Tab Duration Auto Start 09 55 15 11 a Channel elay Sync Difference SQA 104 norlab harris local 2 00 10 00 00 Choose Server 00 01 00 28 Once you click Sync the frames instantly sync to play out They do not gradually sync like they do with the Soft Sync NEXIO Delay DelayWindow O Harris Broadcast Settings Insert Tab Duration Auto Start 09 53 35 06 ja Channel Delay Difference 5Q4 104 norlab harris local 2 Play Stop Sync 00 01 Choose Server D0 01 00 28 Play With a hard sync as with a soft sync you cannot set any of the parameters i e the number of frames that are allowed to drift or the amount of time that can lapse between frames If you want to specify parameters to sync the drifted frames use SOM Fix NEXIO Delay S 35 User Guide SOM Fix The Start of Message SOM fix feature must be activated for each recorder channel on the Setup Window Follow these steps to activate SOM Fix m From the Setup Window enter the IP address and channel number in the Recorder field m Check the Activate SOM Fix box m Click Apply then click OK SOM Fix Settings Recorder 172 16 243 104 1 Re svnc Offset E Frames M S w Activate SOM Fix Threshald Frames bee o Response Time 130 Frames For setting details see the SOM Fix setting
6. Imagine COMMUNICATIONS x User Guide ee ee ee Nexio Delay April 2014 175 100465 01 Delivering the Moment imaginecommunications com Publication Information 2014 Imagine Communications Corp Proprietary and Confidential Imagine Communications considers this document and its contents to be proprietary and confidential Except for making a reasonable number of copies for your own internal use you may not reproduce this publication or any part thereof in any form by any method for any purpose or in any language other than English without the written consent of Imagine Communications All others uses are illegal This publication is designed to assist in the use of the product as it exists on the date of publication of this manual and may not reflect the product at the current time or an unknown time in the future This publication does not in any way warrant description accuracy or guarantee the use for the product to which it refers Imagine Communications reserves the right without notice to make such changes in equipment design specifications components or documentation as progress may warrant to improve the performance of the product Trademarks 6800 ADC CCS Navigator Channel ONE ChannelView ClipSync Delay D Series D Series DSX Deliver the Moment Delivering the Moment FAME Farad G8 G Scribe HView IconMaster
7. ayback channel Set the playback delay for 10 minutes Start your recording Observe that your recording starts to play after the 10 minute delay on the playback channel you identified To prepare your first delay recording you must do the following Assign an ID to the material you are recording Access a NEXIO network device Select your Record and Playback channels 12 Chapter 2 Creating a Delay Assign an D Toassign an ID to your recording enter a name in the ID field or select one from the drop down list This example uses the name Test Delay ID O1 Tz NEXIO Delay DelayWindow mx Home Harris Broadcast lt Settings Insert Tab Record SQA 33 1 C1 m m 8 Record ID Test Delay ID D1 Duration 00 00 30 Auto Start 00 00 00 E redre Access a Device Use the Remote Browser to access devices on your NEXIO network Click the browse button next to the Record field to display the Remote Browser r Remote Browser v Server Name Channel CH Name The Remote Browser allows you to search a segment of your network for NEXIO devices that you can use for recording and playback Typically the first three octets in the IP Address range Should be the same or else the network search may take a long time to return valid NEXIO servers In this Example The browser searches a range of IP addresses To use the browser enter a range of IP addresses from your NEXIO network in
8. ays remain the same length In this Example set the recording duration to 1 hour using the Duration field on the Delay window JEXIO Delay DelayWindow Harris Broadcast wil Record ID Test Delay ID 01 00 00 00 amp ja Channel elay Control Note Length of playback Delay must be less than the Duration length of the recording Select a Playback information displays in the table on the Delay window To Playback select a Playback channel click on the Choose Server label then Channel click on the browse button ull NEXIO Delay E 15 User Guide O Delay DelayWindow O Harris Broadcast v e Record ID Test Delay ID_01 D Auto Start Timed Record Channel Delay Difference Choose Server xr 00 10 00 KXXX The Remote Browser displays so you can select a Playback channel Note The Remote Browser works the same way for selecting Record channels and Playback channels v Server Name Channel CHName Type Enter a range of IP addresses from your NEXIO network into the From and To fields and click Search Now 16 B Chapter 2 Creating a Delay Remote Browser v Server Name Server IP Channel CH Name SQA 34 172 16 243 34 2 CH2 SQA 34 172 16 243 34 CH3 SQA 121 172 16 243 504 121 172 16 243 SQA 121 172 16 243 sqa 120 norlab h 172 16 243 Search Now Click on a green table row to select a P or PR channel type The channel you selec
9. back will start automatically NEXIO Delay Delay Window Home Li Harris Broadcast Duration b 14 45 22 v Channel Difference SQA 104 norlab harris local 1 SQA 104 norlab harris local 2 Delay Window E 19 Understanding the UI This chapter describes the NEXIO Delay interface and shows how to use the controls Controls for managing your playbacks and records are located in the table below vil Record ID Test Delay ID 01 E Timed Record Difference 00 10 00 SQA 33 1 C1 Playback Controls 20 Chapter 3 Understanding the UI Record Controls Record For Example NX3801HDX 1A 1 The Record field shows the network ID of the recorder server along with the channel number EN Click the button to display the Remote Browser Use it to browse for Record channels on your NEXIO network Record button Use the Record button to start your recording All network configurations must be in place and all Delay settings must be made before the Record button will work m he Record indicator flashes red as the recorder is queuing up m The Record indicator shows solid red while a recording is in progress Stop button Click Stop to end a recording Test_Delay_ID_5 The record ID is the name of the clip being recorded The record ID should be selected or entered before you start the Recorder otherwise the software automatically
10. c Initiates the functions of the playout channels using these buttons and shows the status of the selected playback channel m Play Shows the status of the playback channel The yellow LED displays when the record is in standby mode Normally during timed records Once the playout begins the LED is solid green The LED shows solid red when the channel is in playback mode m Stop Click to stop an active playback m Sync Click to perform a hard manual sync of the frames that have drifted during recording or playback Soft Sync Soft Sync M Difference Difference Select Soft Sync to have the system automatically sync frames that have drifted during recording or playback Soft Sync maintains the threshold defined in the Setup form under the SOM Fix setting Warning Do not use Soft Sync when you are using compressed audio feeds Displays the amount of timecode drift between where the playout channel is playing and where it should be playing Ideally this value should always be at 00 00 Difference is shown in seconds and frames Adding Channels Synching NEXIO Delay B 23 User Guide You can add channels to the Playback table Right click on the bottom bar to view a drop down menu Select the Insert Delete tab to add or remove multiple recorders to or from the Delay interface Sorting channel column Click on the Channel column to toggle the sort order of the channels listed
11. ce v Channel Delay Control Enter the local time for the recorder to start This time is based on a 24 hour clock 32 Chapter 4 Using NEXIO Delay Record SQA 104 norlab harris local 1 wl Record ID Test Delay ID 01 Duration Auto Start 14 31 59 Timed Record v Channel Yelay Control Soft Sync Difference Record SQA 104 norlab harris local 1 wil Record ID Test Delay ID 01 Duration Auto Start 14 31 59 Timed Record Channel elay Control Soft Sync Difference The Timed Record LED will flash red to indicate that a recording has been set When the time comes for the recording to begin the LED will show solid red to indicate that the recording is in progress Playing a You can connect players to the recorder while a timed record is waiting to start Timed m Select the player channel that you want for the Timed Record Record said playback Then click the Play button Record Duration Channel Jelay Contro Soft Sync Difference SQA 104 norlab harris local 2 00 00 11 The yellow LED on the Play button flashes indicating that the player cannot queue up and is now on standby Once the Timed Record time is reached the recording starts and the flashing yellow LED on the Play button starts to flash green This indicates that the player is queuing up Once the player channel starts the flashing green LED becomes solid green Playback will start automatically in a timed event
12. compatible with the rest of the NEXIO software make sure to run the installation routine provided with each release Review the NEXIO Software Install Guide for more information on installing individual applications See the NEXIO Software Release Notes for a list of compatible software versions The NEXIO Delay application is a licensed add on to NEXIO server systems The application includes a 60 day trial license Each launch of the application will indicate how many days remain before the application must be licensed The type of Delay license you purchase determines the number of record and playback channels you can control from the Delay application Delay License Record Channels Playback Channels NXA DELAY 2 4 NXA DELAYLITE 1 1 NXA DELAYUP1 3 8 NXA DELAYUP2 4 12 Registering Your Software NEXIO Delay 9 7 User Guide The NXA DELAYUP1 and NXA DELAYUP 2 are upgrade licenses The NXA DELAY license is required first You must use the Software License Key Registration Manager to enable your software license on the computer where the Delay application is running Here is a summary list of steps m Use the Registration Manager utility to extract a dc file Email the dc file to Harris Broadcast Customer Support Customer Support will in turn email a redistribution code rc file back to you m Use the Registration Manager to load the rc file onto your server and enable your license Fol
13. e a correction occurs This presents unnecessary correction due to momentary clock jitter The recommended value is 150 Warnings You can set Delay to display a warning when the RAID set space on your server is low Check the Warn when RAID set space low box to enable You can specify the percent of space left on your RAID set and the number of segments left on your RAID set Warnings Warn when RAID set space low Warn when 5i space left on RAID set Warn when segments left on RAID set 4 Setting a Timed Record 31 Using NEXIO Delay You can set a recording to begin at a specific time Here are the steps you will perform m Select the record channel m Enter the duration of the recording Enter the local time for the recorder to start m Click the Timed Record button From the Delay Window select your record channel from the list in the Record field You can also use the button to lauch the Remote Browser to search for a channel Record 5Q4 104 norlab harris local 1 wil L Rec un ID Test_Delay_ID_01 Duration 01 00 00 Auto Start 14 31 59 E Timed Record v Channel Delay Control Soft Sync Difference Enter the duration of the recording in the Duration field Use the HH MIN SEC format Minimum allowed value is 30 seconds Record SQA 104 norlab harris local 1 q a Pree ID Test Delay _ D0 L Duration Auto Start 14 31 59 9 Timed Record Soft Sync Differen
14. ed server channel the Delay application will compare the house timecode to the channel s recording timecode and make adjustments based on the SOM Fix Settings Start of Message SOM Fix compensates for drop frame drift that occurs relative to 24 hour clock time The SOM Fix feature ensures that the delayed playback timecode matches the operator expected time of day when that timecode occurs By definition SOM is the beginning of playout The SOM Fix Setting utility adjusts drift between frames with an automatic sycn SOM Fix Settings na PLRealtine en remote host Recorder M Re svnc Offset Frames Threshold Frames Response Time Frames 30 Chapter 3 Understanding the UI Recorder IP address or the computer name of the NEXIO server The server IP or computer name is followed by a space before and after the colon Activate SOM Check this box to activate the SOM fix feature Fix Re sync The number of frame that you want the Offset recording timecode to offset the network timecode Enter a positive number if you want frames to lead i e 3 Enter a negative number if you want frames to lag i e 3 The default value Is negative 3 Threshold The number of offset frames that are allowed before a correction is triggered The threshold range is from O to 9 frames Values above 9 are ignored and O is used The recommended value is 2 Response The number of offset frames that must be present befor
15. enters a default name The last three record IDs can be selected from the drop down box Duration Duration Duration is the length of the recording that you are setting up along with the number of frames Duration is shown as HR MIN SEC The number of frames is shown after the semicolon The maximum duration is 23 59 59 To enter a duration click in the field and type in a value Playback Controls NEXIO Delay User Guide E 21 Auto Start Auto Start 00 00 00 00 Auto Start is an optional setting It sets up the recording to start at a future time It works in conjunction with the Timed Record button Timed Record button Click Timed Record to initiate a recording that will begin at the time shown in the Auto Start field One channel of a recording can play out delayed at different times on multiple channels The number of playback channels you can configure depends on the software license you purchased Channel Channel 172 16 243 34 2 The Channel field shows the network ID of the playback device server along with the channel number Delay Delay 00 01 59 28 The Delay value determines how long the clip will delay before it starts to play back The length of playback delay must be less than the duration length of the recording 22 9 Chapter 3 Understanding the UI Control Control Play Stop Syn
16. le 10 Run the application to complete the registration The correct version of PLRealtime service must be installed on the NEXIO server that is being controlled by the NEXIO Delay workstation PL Realtime does not run nor get installed on the remote workstation where Delay is running If PLRealtime is properly installed you will see a green icon in the service tray of the NEXIO server This icon indicates that PLRealtime can communicate with the LLM on the NEXIO server Note To check the software version of PLRealtime right click on the toolbar icon and select About If you don t see the PLRealtime icon on the service tray of the NEXIO server navigate to Start gt All Programs gt Harris gt Utilities gt PLRealtime and click Service Tray Control NEXIO Delay W 9 User Guide i C no e NXOS Channelview gt Harris Corporation b ClipRouter gt P Notepad E NVIDIA Corporation gt Ef Config E Startup gt E Playlist o rm Ww FTP Client f Utilities S Raid Tools w NEXIO Confia Internet Explorer t LLM fm PLRealtine Install PLRealtime Service Ww i Internet Explorer 64 bit JE NEXIO Config PLRealtime Console PLRealitme console 2 Windows Media Player e NEXIO Manager Service Tray Control Malwarebytes Anti Malware gt Delay gt A Uninstall PLRealtime Service All Programs D e LLM PLRealtime b F PLRealtime C
17. low these steps to register your software Navigate to the C Program Files x86 Harris SLK folder Double click RM exe to display the Software License Key Registration Manager FY Software License Key Registration Manager Application summary info Application Registration MxOS2 Registered MEXIO Wizard Registered MEXIO Delay Registered pM Registration Register Begin the new registration process Load RC Complete the registration process Begin the re deployment process Select your application from the list and click the Register button 3 Inthe File box enter a file name that includes your server name and serial number For example NX3601HDX 9A_ 5611002456562 The Registration Manager will add the dc file extension to indicate deployment code 8 E Chapter 1 Overview PLRealtime il 4 Save the dc file to the USB stick 5 Email a copy of the dc file to Harris Broadcast Customer Support Include the name of the license you are registering in the email Harris Broadcast Customer Support will send you a redistribution code rc file by return email 6 Copy the rc file from Customer Support onto the USB stick and insert it into your NEXIO server 7 Navigate to C Program Files x86 Harris SLK folder and double click RM exe to open the Software License Key Registration Manager 8 Click the Load RC button 9 Navigate to locate the USB stick on your NEXIO server and double click the rc fi
18. me You can also delay playouts for live event censoring or for time zone based delayed broadcasts The NEXIO Delay software can be installed on some local NEXIO servers or on a remote computer connected to a NEXIO network The Delay interface can connect to any NEXIO server on the network to access their Record and Play channels Once the parameters are set Delay automatically outputs the delayed video on the server play channel You can create a maximum of 12 player channels and up to 4 record channels These are all controlled by one interface connected to the NEXIO network from a remote location NEXIO Delay supports the following servers m NEXIO AMP Gen 1 6 NX3601 and NX3801 m NEXIO Volt Gen 1 2 NX1401 and NX1801 NEXIO Delay runs on a 64 bit Windows 7 operating system Therefore it cannot be installed or run directly on the NX1410 or NX3601 However Delay can control those NEXIO servers when it is installed on a remote computer 6 E Chapter 1 Overview Compatibility Software License Key The NEXIO Delay software must be compatible with the software installed on the NEXIO device you are accessing Make sure that all of the software versions are compatible on the following applications and services NEXIO Delay workstation m NXOS NEXIO device m PLRealtime NEXIO device m LM NEXIO device Every NEXIO software release includes compatible versions of the software To install the NEXIO Delay application
19. n 23H 59M 30S Min Play The minimum play delay Default is 16 seconds Delay Kill Date Sets the number of days after new Delay Length recordings are created before the clips are marked as expited User The user name entered here goes into the metadata for all clip IDs created by the Delay application Show Displays the amount of timecode drift between Difference where the playout channel is playing and where it should be playing Ideally this value should always be at 00 00 Difference is shown in seconds and frames NEXIO Delay W 29 User Guide Show Frames Enables the frame counters for all clock measures Frames are shown in the table on the Delay Window Name of These settings determine how Delay responds Existing IDs when you set up your delay recording to use an ID name that already exists on the server SAN Indicate how ID names are assigned IDs are shown on the Delay Window m Overwrite Deletes the existing ID m Auto increment Automatically creates a new ID name with an underscore and auto incrementing number appended to the original name SOM Fix Setting The SOM Fix Settings adjust the SOM Start of Message timecode of aclip in the record mode so that the current channel timecode matches the house timecode feed This feature is intended to keep the Delay recording s timecode in sync so that the delayed playout channels are properly timed When SOM Fix is enabled for a specifi
20. ndicates a record channel m PR indicates a bi directional channel that can both play and record Setup Window NEXIO Delay User Guide E 27 Column Name Definition Row Colors Row colors indicate channel status m Green indicates an available channel mg Pink indicates an incompatible channel type m Dark Pink indicates a locked channel m Gray indicates an incompatible version of PLRealtime or PLRealtime has not launched NEXIO Delay properties can be preset for your facility s mode of operation Once set they remain in effect for all new delays until they are changed or reset To launch the Setup window click the Setup button on the NEXIO Delay window 28 E Chapter 3 Understanding the UI Delay Settings Delay Settings Min Record Duration Max Record Duration Min Play Delay Kill Date Length in days 30 SOM Fix Settings no PLRealtine on remote hast Recorder 4 Re sync Offset Frames Warnings Warn when Warn when 0b 00 30 00 User Mame DelayUser z3 39 30 00 Show Difference Show Frames Naming of existing IDs Overwrite Subo increment Threshold Frames Response Time Frames Warn when RAID set space low space left on RAID set segments left on RAID set Min Record Duration The minimum record duration Default is 30 seconds Max Record The maximum record duration Default is Duratio
21. onsole E Nxos T NEXIO Config gt E M M M MM e MM V M M M 9 M B IT Gsamplenexi C Binaries FE Nexo config umy 607 9 nexo This installs the PLRealtime gt icon in the Windows desktop service tray You can use this to monitor the status of the PLRealtime service Opening From your NEXIO Delay workstation double click on the Delay desktop icon to open the Delay application Delay Note Playout and record channels will only be available if the LLM is open on the host server If the LLM is closed the channels for the host server will not be available ill 10 9 Chapter 1 Overview You can also navigate to Start gt All Programs gt Harris gt Delay IO Delay DelayWindow OQ Harris Broadcast 2 3 B cci L Record Duration Auto Start Timed Record a Channel Delay Control Difference Play Delay1 Preparing a Delay E 11 Creating a Delay This chapter describes how to configure a record and playback Delay using NEXIO Delay software This Example makes a 1 hour recording sets a 10 minute delay and plays the recording out after the 10 minute delay To configure this Delay you must do the following Assign an ID to your recording Access a Record Playback device on your NEXIO network Select your Record channel Set the recording duration for 1 hour Select your Pl
22. rsonalizedTV ICE Broadcast System ICE Illustrate ICE Q9 algorithms ICEPAC Imagine ICE Inscriber Inscriber Connectus Invenio NEO Nexio Nexio AMP PersonalizedTV RouterWorks Videotek Videotek ASI STAR Videotek GEN STAR and Videotek HD STAR are registered trademarks of Imagine Communications or its subsidiaries Microsoft and Windows are registered trademarks of Microsoft Corporation HD BNC is a trademark of Amphenol Corporation Some products are manufactured under license from Dolby Laboratories Dolby and the double D symbol are registered trademarks of Dolby Laboratories DTS Neural audio products are manufactured under license from DTS Licensing Limited DTS and the Symbol are registered trademarks amp the DTS Logos are trademarks of DTS Inc 2008 2010 DTS Inc All other trademarks and trade names are the property of their respective companies Contact Information Imagine Communications has office locations around the world For locations and contact information see http www imaginecommunications com contact us Support Contact Information For support contact information see Support Contacts http www imaginecommunications com services technical support eCustomer Portal http support imaginecommunications com 2014 Imagine Communications Corp Proprietary and Confidential Chapter 1 Chapter 2 Chapter 3 Contents Overview Compatibility sessssas
23. t will display in the Playback table on the Delay window Set Delay Delay determines how long the clip will delay before it starts to play back In this Example set the playback delay for 10 minutes Click on the Delay field in the Playback table to set the value H NEXIO Delay DelayWindow X Home p Harris Broadcast m Settings Insert Tab vil Record ID Test Delay ID 01 Timed Record Channel jelay Contro Soft Sync Difference hoose Server Start a Recording NEXIO Delay m 17 User Guide Click the Record button on the Delay window The red LED blinks briefly and then glows solid red when the recording begins Harris Broadcast 11 15 42 Difference The meter numbers under the ID field count up to show the duration of the active recording This Example shows the NEXIO playout device viewed via NXOS Here the Test_Delay_ID_1 ID is loaded and begins to record when the Record button is clicked on the NEXIO Delay window CHANNEL LOCKED 14 39 00 BLIS Y SEES es uc i uq 2 GUT Locked In 1080 6029 87 Qut 108015 29 87 Default AFD 1000 Recordin 18 E Chapter 2 Creating a Delay Observe Delay Playback When the delay period elapses the ID plays out on the channel you indicated To start a standard record you must press the Play button in the delay GUI The Play button will start flashing green and change to solid green once play back has started For a timed reccord play
24. to the From and To fields and click Search Now NEXIO Delay S 13 User Guide Fr p Remote Browser 23 w Server Name Server IP Channel CHName Type SQA 34 172 16 243 34 2 SQA 34 172 16 243 34 ieee 172 16 2437 192 16 243075 sqa 120 norlab h 172 16 243 Search Now In this case the search found several available channels within the specified IP address range Remote Browser search results are color coded as follows Green The server channel is available m Gray Server has an incompatible version of PLRealtime or PLRealtime has not launched m Light pink Server channel is not available Dark pink Server channel is locked Remote Browser channel types are coded as follows m P Playback channel gm R Record channel m PR Playback Record channel 14 B Chapter 2 Creating a Delay Select a Record Click on a green table row to select a Record or Playback Record Chanel channel then click Select The server channel you selected displays in the Record field NEXIO Delay DelayWindow X Home OQ Harris Broadcast v Record ID Test Delay ID_O1 Duration 00 00 30 Auto Start 00 00 00 Timed Record A Channel elay Contro Soft Sync Difference Set Duration Duration is the length of the recording that you are setting up When the recording reaches its maximum the software deletes the front of the clip as it adds to the end of the clip This allows the clip to alw
25. uissssss Software License Key Registering Your Software PLRealtime ss Opening Delay Creating a Delay Preparing a Delay Assign an ID Access a Device Select a Record Chanel Set Duration Select a Playback Channel SOU Delay c Start a Recording Observe Delay Playback Understanding the UI Delay Window Record Controls Playback Controls iv WB Contents Adding ChanhelS mc 23 SLEA O E E E E A E E 23 REMO BION S OF caan r a E ee ee ee ee 24 SCO VV NAC OW rer a A 27 Bravia E 28 SOM a aes old ig 3 oiesxsteitenuatsdnbisC E dein iolusmE rer tere 29 NOUN GS ur 30 Chapter 4 Using NEXIO Delay Setting a Timed Record 31 Playing a Timed ReCOFG 2 miri etci enr t tto bbb desse mu SeSe pnr TES ri ie ERR ERU 32 SAL E E M TA 33 OS aa eean taexa tt eat eeteteaesnnaseetveueeeuessueen tet eccaic 33 mifer nner nents ern eee tT een rere te ieee re eT 34 a 35 E 5 Overview NEXIO Delay is a software application designed for NEXIO servers to provide recording and time delay playout You can use Delay to program a NEXIO server to record an inbound feed at a later point in ti
Download Pdf Manuals
Related Search