Two Seat Bicycle Trailer User`s Manual
Contents
1. See Adjusting the Shoulder Strap Height on Page 12 for more detail Clip the shoulder straps into the lap belt buckle and adjust the shoulder straps Important Adjust the shoulder straps and lap buckle so they meet at the child s stomach 4 5 15 Removing the Trailer Remove the child from the passenger com partment 1 2 Unsnap the safety loop and remove the locking pin from the tow bar coupler plate and tow bar 3 Remove the tow bar from the tow bar coupler plate 4 Re insert the locking pin into the holes on the end of the tow bar Snap the safety loop onto the locking pin Un clip the tow bar safety strap un loop it from the bicycle and clip it back on the ring on the end of the tow bar 5 Tow bar ring Bicycle frame Safety strap clip Snap safety loop Locking pin Coupler plate Tow bar Unsnap safety loop Locking pin If desired leave the coupler plate on the bicycle for future use Not necessary to remove 6 Note view is looking down on the tow bar Note view is looking down on the tow bar Note view is looking down on the tow bar Note view is looking down on the tow bar Disassembly and Storage 16 Storing the Trailer Remove the flag and pole Separate the flag pole sections Remove the rear wheels 1 Find the release lever on the wheel bracket 2 Pull the release lever straight out and hold 3 Remove the wheel 4 Rel2. pull the shoulder strap anchor away form the seat 2 Insert the anchor through the slit in the seat pushing it towards the front 3 Insert the anchor through the slit in the front of the seat at the desired height 4 Pull the strap and anchor all the way through to the back Make sure the strap is properly anchored on the seat back Repeat these steps for the opposite strap WARNING Avoid serious injury from falling or sliding out Always properly secure the passenger with the 5 Point Safety Harness It may be dangerous to leave your child unattend ed Never leave your child unattended in or near the bicycle trailer Using the 5 Point Safety Harness with Two Children Place the shoulder straps over the child s shoulders with the waist belt under the child s arms See Adjusting the Shoulder Strap Height below for more detail Clip the shoulder straps into the lap belt buckle and adjust the shoulder straps Important Adjust the shoulder straps and lap buckle so they meet at the child s stomach 4 5 13 Converting the Safety Harness for One Child Start with the straps in the two child position Unfasten the shoulder straps from the center lap buckle on both sets of safety harnesses 1 Snap the left shoulder strap from the right set of safety harnesses into the center lap buckle Then snap the right shoulder strap from the left set of safety harness into the center b
3. instructions for attaching the trailer to a bicycle with rear hub nuts or quick release Trailer Attachment WARNING Use of the trailer without the safety strap attached to the bicycle may result in serious injury or death Always attach the safety strap to the bicycle when using the trailer Using a wrench remove the hub nut and washer from the bicycle s back wheel 1 Washer Hub nut Place the tab washer on the axle Fit the tab into the slot on the bicycle frame dropout 2 Tab washer Place the coupler plate on the axle in a vertical position and the large hole down Align the pegs on the back of the plate with the holes in the tab washer 3 Place the hub nut and washer back on the axle and tighten Coupler pegs Coupler plate large hole 4 Washer Hub nut Coupler plate Slot Tab 10 Insert the tow bar into the large hole on the coupler plate 5 Insert the locking pin through the coupler plate and tow bar Coupler plate Tow bar 6 Slide the metal safety loop onto the locking pin Check that it is securely in place 7 Wrap the tow bar safety strap around the bicycle frame and clip it to the ring on the end of the tow bar 8 Tow bar ring Bicycle frame Safety loop secured to pin Safety strap clip Locking pin Safety strap Safety loop Note view is looking down on the tow bar Note view is looking down on the tow bar N
4. to a Bicycle with Quick Release Axles 11 Using the 5 Point Safety Harness 12 Using the 5 Point Safety Harness with Two Children 12 Adjusting the Shoulder Straps 12 Converting the Safety Harness for One Child 13 Using the 5 Point Safety Harness with One Child 14 Disassembly and Storage 15 Removing the Trailer 15 Storing the Trailer 16 Accessories 16 1 Thank You For purchasing the InStep Bicycle Trailer You will be sure to enjoy hours of pleasurable exercise and family time If you have any questions or comments our customer service hours are 8 00 AM 5 00 PM Monday through Friday CST You may also reach us through the following Contact us Phone 1 800 242 6110 The Web www instep net Email info instep net Address 4730 East Radio Tower Lane Olney IL 62450 Important Do not return the product to the store Please contact customer service at 1 800 242 6110 for assistance and replacement parts 2 Safety WARNING Warranty Pacific Cycle warrants this product to be free of defective materials and workmanship for 1 year from the date of original purchase THIS LIMITED WARRANTY IS THE ONLY WARRA
5. waist belt WARNING Do not use cleaning solvents clean only with mild soap and water Additional Warnings for Customers in the European Union Storage Use caution to avoid pinch points when folding or unfolding the Jogging Trailer 5 Parts and Features Rain Cover Rear Wheels 2 Safety Flag with pole Canopy Frame includes Canopy Seat with 5 Point safety harness Tow bar Bicycle coupler Rear wheel brackets 6 Assembly Unfold the Canopy Frame WARNING There are pinch points between the sidewalls and the frame of the trailer that may cause injury Fold or unfold the trailer slowly using caution Keep children clear when folding or unfolding the trailer Ensure that all locking devices are engaged before use Standing behind the trailer lift the right side wall upward until the upper half is in the vertical position Lift the left side wall upward Unfold the upper half into the vertical position 1 2 Right wall Left wall 3 5 Crossbar Rotate the crossbar into the joiner housing Pull up and down on the crossbar to make sure it is locked in place 4 Depress outside buttons on crossbar to insert in joiner and lock in place Lock Crossbar buttons 7 Extend and Secure the Tow Bar Place the trailer on its side with the tow bar on top Unfold the tow bar until it rests on the front part of the bracket 2 Remove the locki
6. Important Keep instructions for future reference Two Seat Bicycle Trailer User s Manual This manual contains safety assembly use and maintenance instructions Read these instructions carefully before use and keep them for future reference Your child s safety may be affected if you do not follow these instructions The InStep Bicycle Trailer must be assembled by an adult who has read and understands the instructions in this manual Keep the packaging away from children and dispose all packaging before use Do not return to store Call toll free 1 800 242 6110 for assistance and replacement parts Contents Warranty 2 Safety 2 Parts 5 Assembly 6 Unfold the Canopy Frame 6 Attach the Canopy 7 Extend and Secure the Tow Bar 7 Attach the Rear Wheels 8 Insert the Safety Flag 8 Trailer Attachment 9 Attaching to a Bicycle with Rear Hub Nuts 9 Attaching
7. NTY APPLICABLE TO THIS PRODUCT AND IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTY ANY IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY AND WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS LIMITED IN DURATION TO THE DURATION OF THE EXPRESS WARRANTY This limited warranty give you specific legal rights and you may also have other rights which may vary from state to state This warranty is extended only to the original consumer purchaser for non commercial use and does not cover tires or tubes grips brake pads or other wear parts ordinary wear and tear abuse misuse neglect theft or damage due to accident PACIFIC CYCLE IS NOT RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES THIS LIMITED WARRANTY DOES NOT COVER ANY PERSONAL INJURIES DAMAGE TO OR FAILURE OF THE PRODUCT OR ANY OTHER LOSSES DUE TO ACCIDENT ABUSE MISUSE ALTERATION NEGLECT NORMAL WEAR AND TEAR IMPROPER ASSEMBLY IMPROPER FIT IMPROPER MAINTENANCE OR USE OF UNAUTHORIZED REPLACEMENT PARTS NOT DESIGNED FOR THE PRODUCT To make a claim under warranty notification of such defect must be given to Pacific Cycle Inc at the address stated on the previous page You will be instructed on how the product or part needing replacement should be shipped postpaid to Pacific Cycle Inc FAILURE TO FOLLOW THE SAFETY INSTRUC TIONS LISTED BELOW MAY RESULT IN SERI OUS INJURY OR DEATH Always read and under stand the information and warnings in this manual b
8. ease the lever Remove the locking pin from the tow bar bracket located at the front corner of the trailer Fold the tow bar underneath the trailer Place the locking pin back through the tow bar and bracket Place all loose items inside the passenger compartment Carefully fold the frame down Store in a dry place 1 2 3 4 5 WARNING There are pinch points between the sidewalls and the frame of the trailer that may cause injury Al ways fold or unfold the trailer slowly and with cau tion Keep children clear when folding or unfolding the trailer 6 7 8 Accessories The following accessories can be ordered from www instep net Additional Coupler Kits includes coupler plate tab washer and locking pin Trailer Conversion Kit includes front wheel with locking pin padded handlebar safety wrist strap parking brake Important If the storage area is hot then release some air from the tires This will help prevent excessive expansion or popping Manufactured for Pacific Cycle Inc A Division of Dorel Industries Pacific Cycle Inc 4902 Hammersly Rd Madison WI 53711 2009 Pacific Cycle Inc Made in China Printed 2009 InStep is a registered trademark of Pacific Cycle Inc www instep net
9. efore using the Bicycle Trailer If you are unsure of any information in this manual or have a question regarding assembly or use please call customer service Always keep this manual for reference and include it with resale of the Bicycle Trailer Assembly An adult who has read and understands the information and warnings in the manual shall assemble this product according to manufacturer s instructions Do not use the product if there are any missing or damaged parts Do not return the product to the store Please contact customer service at 1 800 242 6110 for assistance and replacement parts Dispose of all plastic bags and wrapping material immediately Check the assembly i e crossbar locked screws tight before using the product Never allow children to assemble fold or disassemble the trailer Children The maximum weight capacity per child is 50 lbs The total weight children and cargo in the trailer cannot exceed 115 lbs Never have more than two children in the trailer at one time 3 Safety This vehicle is intended for use with children at least 12 months old and weighing up to 50 lbs Never use with children that cannot support their own head WARNING Avoid serious injury from falling or sliding out Always use the 5 Point Safety Harness WARNING Never leave children unattended in or around the trailer Use The manufacturer recommends the bicycle
10. he trailer to become unstable Do not place items on the trailer Hazardous conditions may exist if package carrying accessories are added to the product Always have the canopy in place Always maintain a safe speed Avoid quick sharp changes in direction as tip over may occur The trailer is not intended for use at high speeds Do not exceed 10 MPH Allow extra clearance for the trailer when near curbs parked cars and other obstacles The trailer requires a wide turning radius Do not turn sharply Use caution when turning on loose or uneven surfaces and when going downhill Avoid braking suddenly Do not ride over curbs bumps or holes Do not use the trailer in hazardous weather or at night Do not pull or push the trailer with a vehicle WARNING Do not add a seat pad mattress thicker than 2 5 63 5mm Accessories not approved by the manufacturer shall not be used If the trailer has a parking brake then always engage when stopping releasing the handle or loading unloading children 4 WARNING Use the harness as soon as your child can sit unaided WARNING The seat unit is not suitable for children under 12 months old WARNING This product is not suitable for running or skating WARNING Check the trailer pram body or seat unit attachment devices are correctly engaged before use WARNING Always use the crotch strap in combination with the
11. ng pin from the bracket Insert the locking pin through both the bracket and tow bar 4 Slide the metal safety loop onto the locking pin Check that it is securely in place 5 Tow bar Safety loop Locking pin Locking pin 1 3 Slide the canopy over the canopy frame Snap the canopy in place there are 2 snaps on each side then secure with the hook and loop fasteners Snap Snap Hook and loop fastener rear edge not shown Attach the Canopy 1 2 8 Attach the Rear Wheels Insert the rear wheel axle into the rear wheel bracket hole 1 Push the wheel into the bracket until you hear the axle click into place 2 Wheel axle Rear wheel bracket Pull rmly on the wheel to ensure the locking mechanism is engaged Repeat these steps on the opposite side 3 WARNING Click Rear wheels that are not securely locked in place may fall off the trailer and cause serious injury or death Always check the wheels are securely locked in place before use Important The safety ag is an important safety feature that warns others a trailer is present and on the bicycle Always have the safety ag on the trailer when in use Insert the Safety Flag 1 Assemble the ag pole sections by sliding the top half of the pole into the opening of the bottom half of the pole 2 Slide the pole into the sleeve located near the rear corner 9 The following section provides
12. ote view is looking down on the tow bar Note view is looking down on the tow bar 11 Flip the quick release lever and remove the nut and spring from the opposite side Attaching to a Bicycle with Quick Release Axles 1 Remove the axle skewer and spring Leave the wheel in place 2 Slide the axle skewer through the coupler plate and tab washer 3 Insert the axle skewer tab washer coupler plate and spring through the wheel with the parts oriented as described in step 3 The wide end of the spring must face out touching the lever The bell on the coupler plate should face out The hook on the tab washer must face towards the wheel hub 4 Rotate the quick release lever up and close fully and tightly Fit the tab on the tab washer into the slot on the bicycle frame dropout Place the spring and nut removed in step 1 on the axle skewer and tighten 5 6 Follow steps 5 8 on Page 10 7 12 Using the 5 Point Safety Harness 1 Unbuckle the shoulder straps from the center lap buckle Seat the child in the center of the passenger compartment 2 Place the lap belt buckle between the child s legs 3 Adjusting the Shoulder Strap Height There are three slots on the back of the seat These slots are used to adjust the proper height of the shoulder straps to your child s height To adjust the shoulder strap height 1 Starting from the back of the seat
13. to be used with the trailer undergo a safety check with a qualified bicycle mechanic before attaching the trailer Before each use check The trailer for damage Do not use if damaged The tire pressure If necessary inflate the tires to within the range shown on the tire sidewall Always use a foot or hand pump to inflate the tires The fasteners are tight Tighten if necessary The safety flag and reflectors are in place Do not use the trailer without the safety flag and reflector in place Attach a rearview mirror on the bicycle to check on the child children in the trailer Ensure the brakes work properly Braking distance is increased when pulling a trailer When using the double trailer with one child seat them in the center WARNING Any load attached to the handle affects the stability of the trailer pram push chair Unstable hazardous conditions may exist if package carrying accessories are added to the product The maximum weight that can be carried in the cabin pockets is 1 lbs each The maximum weight that can be carried in the rear storage area is 10 lbs During use be sure to Take proper steps clothing ventilation hydration to protect the child from exposure hazards such as wind chill and heat exhaustion These hazards will have a greater impact on the less active passenger WARNING Parcels or accessories placed on the trailer may cause t
14. uckle Note By doing this you will be flipping the buckle prong on each strap which will twist the shoulder straps 2 Right Safety Harness Left Safety Harness Right Safety Harness Left Safety Harness Fold side buckles down To untwist the straps locate the shoulder strap anchors on the seat back Pull the anchor away from the seat 3 4 Insert the anchor through the slit in the seat back pushing it towards the front 5 Untwist the strap and re insert the safety strap anchor through the slit to the back of the seat Repeat steps 3 5 for the opposite side 6 The safety straps are now in the one child position as shown below Center Safety Harness Important When not in use fold the lip of the lap buckle pad over the buckle opening and secure with the Velcro tabs 14 WARNING Avoid serious injury from falling or sliding out Always properly secure the passenger with the 5 Point Safety Harness It may be dangerous to leave your child unattend ed Never leave your child unattended in or near the Bicycle trailer 1 Unbuckle the shoul der straps from the center lap buckle Seat the child in the center of the passenger compartment 2 Place the lap belt buckle between the child s legs 3 Using the 5 Point Safety Harness with One Child Place the shoulder straps over the child s shoulders with the waist belt under the child s arms
Download Pdf Manuals
Related Search