User Manual STUDIO Oct12
Contents
1. cable characteristic impedance connected across the primary data signal pair THELIGHT luminaries DMX working personality can be configured to be NOTE recognised by Avolites consoles Download the personality files to install into Avolites consoles from www avolitesdownload com PersonalityLibrary mainPage Main aspSID 3516 for Avolites consoles users 18 8 MECHANICAL ADJUSTMENTS Beam angle variation Hold the lamp head from the outer segments and bend it in or out to the wanted concave or convex shape Choose the light beam angle you need and the lamp head will remain at the chosen setting When the lamp head is positioned at standard flat setting the light beam angle is 35 The maximum light beam angle Is given when the lamp head is bend at its more convex setting Ss O DD Q 90000006 00000000 80006 Barn doors installation Place the barn door axle into the external lamp head segment grooves Then insert one end of the axle into the hole located at the lamp head exterior segment as shown in the picture The right mounting position is achieved when the product name is visible facing outwards Insert the other barn door axle end into the Opposite hole located at the lamp head exterior segment E E E gt q A 2 Q A o Softbox diffuser installation Position the lamp head in its standard flat setting Align the side wings captive screws with their respective threaded inserts loca2. 100 standard 35 more than 50 000 hours UME Minimum Emitting Unit made up of 3 Philllips high power LED with selected BIN Fresnel lens CPU control with THELIGHT software aluminium yoke with 28 pin removable barn doors softbox diffuser hilite quarter half and full silent grid cloth options 28 pin combined with 16mm female Universal 90 264 VAC 90 60Hz 2O0KHz 1x 20 A Black anodized extruded aluminium and black powder coated flicker free up to SUUUfps sheet aluminium 24 fps 500 ASA PHOTOMETRICS O9LIGHT STUDIO 5600K 3200K Lux F Stop FE meters Fc F Stop Lux 10000 16 2 3 925 1 925 16 2 3 10000 1300 5 6 2 3 120 3 110 5 6 2 3 1200 350 2 8 4 32 E 28 2 8 1 3 300 25 COLOUR TEMPERATURE LIGHT INTENSITY GREEN MAGENTA BIAS DMX CRI DIMENSIONS WEIGHT OPERATION TEMPERATURE COOLING PROTECTION POWER DRAW POWER CONNECTION BEAM ANGLE LED RATED LIFE THELIGHT LED TECHNOLOGY RIGGING ACCESSORIES POWER SUPPLY INPUT FREQUENCY OUTPUT FREQUENCY FUSE CONSTRUCTION amp FINISH 4LIGHT STUDIO adjustable from 2500K a 6500K 100K increments dimmable with minimal colour shift 1 2 stop increments adjustable 1 4 y 1 8 steps from 2500K to 5600K XLRO in amp out connectors g 340 x 205 x 146 mm 4 9 kg including yoke from 20 C to 40 C no noise fan free passive cooling IP21 indoor or outdoor protected use 73W Nominal 98W Maximum Neutrik PowerCon in amp out connectors variabl
3. 125 standard 39 more than 50 000 hours UME Minimum Emitting Unit made up of 3 Phillips high power LED with selected BIN Fresnel lens CPU control with THELIGHT software aluminium yoke with 28 pin removable barn doors softbox diffuser hilite quarter half and full silent grid cloth options 26 pin combined with 16mm female Universal 90 264 VAC 90 60Hz 2O0KHz 1x 250A Black anodized extruded aluminium and black powder coated flicker free up to SUUUfps sheet aluminium 24 fps 500 ASA PHOTOMETRICS 6LIGHT STUDIO 5600K 3200K Lux F Stop RE meters Fc F Stop Lux 12500 22 1160 1 925 16 2 3 10000 1500 8 130 3 110 5 6 2 3 1200 450 4 41 E 35 2 8 2 3 380 24 COLOUR TEMPERATURE LIGHT INTENSITY GREEN MAGENTA BIAS DMX CRI DIMENSIONS WEIGHT OPERATION TEMPERATURE COOLING PROTECTION POWER DRAW POWER CONNECTION BEAM ANGLE LED RATED LIFE THELIGHT LED TECHNOLOGY RIGGING ACCESSORIES POWER SUPPLY INPUT FREQUENCY OUTPUT FREQUENCY FUSE CONSTRUCTION amp FINISH SLIGHT STUDIO adjustable from 2500K a 6500K 100K increments dimmable with minimal colour shift 1 2 stop increments adjustable 1 4 y 1 8 steps from 2500K to 5600K XLRO in amp out connectors g 340 x 250 x 146 mm 9 9 kg including yoke from 20 C to 40 C no noise fan free passive cooling IP21 indoor or outdoor protected use 92W Nominal 123W Maximum Neutrik PowerCon in amp out connectors variable from 30 to
4. 40 standard 395 more than 50 000 hours UME Minimum Emitting Unit made up of 3 Phillips high power LED with selected BIN Fresnel lens CPU control with THELIGHT software aluminium yoke with 28 pin optional quick link swivel ball head removable barn doors softbox diffuser hilite quarter half and full silent grid cloth options Universal 90 264 VAC 90 60Hz 2OKHz 1x 250A Black anodized extruded aluminium and black powder coated flicker free up to SUUUfps sheet aluminium 24 fps 500 ASA PHOTOMETRICS 2LONG STUDIO 5600K 3200K Lux F Stop Fc meters Fc F Stop Lux 6000 16 556 1 510 11 2 3 5500 800 5 6 1 3 14 3 14 5 6 1 3 800 260 2 8 24 6 23 2 8 250 23 COLOUR TEMPERATURE LIGHT INTENSITY GREEN MAGENTA BIAS DMX CRI DIMENSIONS WEIGHT OPERATION TEMPERATURE COOLING PROTECTION POWER DRAW POWER CONNECTION BEAM ANGLE LED RATED LIFE THELIGHT LED TECHNOLOGY RIGGING ACCESSORIES POWER SUPPLY INPUT FREQUENCY OUTPUT FREQUENCY FUSE CONSTRUCTION amp FINISH OLIGHT STUDIO adjustable from 2500K a 6500K 100K increments dimmable with minimal colour shift 1 2 stop increments adjustable 1 4 y 1 8 steps from 2500K to 5600K XLRO in amp out connectors g 340 x 300 x 148 mm 6 1 kg including yoke from 20 C to 40 C no noise fan free passive cooling IP21 indoor or outdoor protected use 110W Nominal 145W Maximum Neutrik PowerCon in amp out connectors variable from 30 to
5. full spectrum source such as Incandescent lights and therefore cannot be used to accurately read the correlated colour temperature CCT of the light emitted by THELIGHT and other LED light fixtures The eventual diversions to green display as CCOSM or CC10M in hand held colour meters are due to these unaccuracy on reading of the light emitted by LED and must not be considered THELIGHT guarantees pure white light with no green deviation and correct colorimetry of the light delivered by its high power LED luminaries which have been calibrated in laboratory according to CIE 13 3 1995 international standards for measurement of the CRI and chromatic coordinates x and CIE 1931 The reliability of this digital equipment is Supported by the calibration THELIGHT has made in laboratory by spectrophotometer which precision is half yearly calibrated according to the National Institute of Standards NIST of the United States and of the Physikalisch Technische Bundesanstalt PTB of Germany In order that the advanced THELIGHT luminaries could be used together with other light sources THELIGHT has accurately calibrated both the CCT and the chromatic coordinates to match them with traditional light sources following tungsten and daylight standards The digital Control Unit allows a further and precise green magenta correction 2 MODELS Every THELIGHT STUDIO high power LED panel include a digital control on board The range of STUDIO products is comp
6. 95 more than 50 000 hours UME Minimum Emitting Unit made up of 3 Philllips high power LED with selected BIN Fresnel lens CPU control with THELIGHT software aluminium yoke with 28 pin optional quick link swivel ball head removable barn doors softbox diffuser hilite quarter half and full silent grid cloth options Universal 90 264 VAC 90 60Hz 2O0KHz 1x 250A Black anodized extruded aluminium and black powder coated flicker free up to SUUUfps sheet aluminium 24 fps 500 ASA PHOTOMETRICS 4LONG STUDIO 5600K Lux F Stop Fc 14000 22 1300 1800 8 1 3 165 500 41 3 46 3200K meters Fc F Stop Lux 1 1110 22 12000 3 148 8 1600 39 4 420 21 COLOUR TEMPERATURE LIGHT INTENSITY GREEN MAGENTA BIAS DMX CRI DIMENSIONS WEIGHT OPERATION TEMPERATURE COOLING PROTECTION POWER DRAW POWER CONNECTION BEAM ANGLE LED RATED LIFE THELIGHT LED TECHNOLOGY RIGGING OPTIONS ACCESSORIES POWER SUPPLY INPUT FREQUENCY OUTPUT FREQUENCY FUSE CONSTRUCTION amp FINISH 4LONG STUDIO adjustable from 2500K a 6500K 100K increments dimmable with minimal colour shift 1 2 stop increments adjustable 1 4 y 1 8 steps from 2500K to 5600K XLRO in amp out connectors gu 622 x 195 x 148 mm 6 5 kg including yoke from 20 C to 40 C no noise fan free passive cooling IP21 indoor or outdoor protected use 110W Nominal 145W Maximum Neutrik PowerCon in amp out connectors variable from 30 to 60
7. On board control high power LED panels STUDIO OCOQOG BUDO GUETO SUDO CUD OH 2YLXOXNXG YUNG 4 UXOXNXG User s Manual TW EKUDGULT THELIGHT Luminary for cine and TV S L October 2012 INTRODUCTION This guide provides information about how to use the product functions to illuminate with this equipment as well as warnings on his use The are products of professional use for interior locations or studio and must be operated only by qualified technical personnel To obtain the maximum features please read the following operating instructions very carefully before using this fixture for the first time Please keep these operating instructions for you and Subsequent users to reference in the future Safety Precautions Exemption from Liability Warranty www thelight com es THELIGHT Luminary for cine and TV S L For your own Safety please read and follow all safety instructions and warnings THELIGHT Luminary for cinema and TV S L does not assume any responsibility for lighting failures caused by malfunction of this product The manufacturer disclaims liability for any damage to persons or property caused by inappropriate operation damage of this kind lies in the responsibility of the operator This product is manufactured to local specifications and the warranty is valid within the country of purchase Should the product fail or malfunction while you are abroad the manufacturer assumes no responsib
8. at all times the selected colour temperature The value 3 2 corresponds to 3200K and the value 3 3 to 3300K and so on Push the button to increase colour temperature or push the button to decrease it If you keep pushed any of the buttons the you will get a continuous variation _ Every push on the buttons will increase or decrease the colour temperature in NOTE increments of 100 Kelvin DIMMER Light intensity variation The dimmer of the digital control is totally digital and guarantees the regulation of light intensity with minimal changes in the selected colour temperature Light intensity can be easily increased or reduced through the buttons located at the digital control panel Above them a digital display indicates the selected dimmer value from a minimum of 1 to a maximum of 9 Push the button to increase light intensity or push the button to decrease it If you keep pushed any of the buttons the you will get a continuous variation NOTE Every push on the buttons will increase or decrease the light intensity in increments of 1 2 Stop GREEN Green magenta correction Green magenta bias button located at the digital control panel lets you easily alter the colour of the light towards green or magenta in increments of 1 8 and 4 Push the Green button to offset the selected white light A magenta or a green LED turns on the selected value to warn that the light emitted no longer guarantees the correct chr
9. cessories 4 Optional mounts installation The LONG series LED panel are provided with four metric M6 threads specially designed to install THELIGHT optional mounts or any custom made mounts 15 6 DIGITAL ADJUSTMENTS The digital control enables to adjust the following light parameters through its programmed CPU e Calibrated Colour Temperature variation e Stable colour dimming e Green magenta correction Turning the Power On Off Turn on the equipment by switching on the power button The light settings always remain stored when the digital control is powered off The STUDIO LED panel ts electrically protected against power failures but to avoid possible electric shocks and or equipment damages make sure the Danger Power switch will be off before connecting or disconnecting the cable g In case of extreme over tension replace the 59mm 2 5Ah fuse from inside the mains power entry fuseholder located at the back see picture on page 13 If a power failure would happen or the cable would be accidentally disconnected the digital control would entry on Error mode and the number 8 would show in the digital display To reset the equipment and resume the light values turn the switch power off connect the cable and switch on the power button COLOR TEMPERATURE Variation Colour temperature can be easily increased or reduced through the buttons located at the digital control panel Above them a digital display indicates
10. does not produce any heat for what his use turns out to be very comfortable for the actors the lamp head acts as a heat sink through its back part surface can reach a temperature between the 50 C and the 80 C Please use protective gloves if you touch the lamp head at the heat sink Do not attempt to open any of the device or component housings To reduce the risk of electric shock do not remove lamp head or Control Unit cover No user serviceable parts inside Maintenance and repair work to be carried out only by THELIGHT Service Centre Do not cover the aluminium lamp head heat sink while using it Proper ventilation must be provided Avoid exposing the lamp head to the heat radiation of other light fixtures The lamp head is equipped with high power LED Due to their high light output intensity dont stare directly into the light source In order to protect against risk of electric shock the installation should be properly grounded Defeating the purpose of the grounding type plug will expose you to the risk of electric shock Marking Ce TABLE OF CONTENTS Main features J A wu TRU 9 GUE E E1 a EN PEE a na Da Safety precautions Table of contents Models ci aE ee eee eee eee ee Components and accessories Names and DARES rsrsr e he een Ue RE ee ng gua Placing into operation WOKS ASSINA cess Sere sls che a Cad gs Connecting the power cable PSC UIE CADIE Saian RE ENE aE EGEE SEE RONTE NE ARa Optional mounts instal
11. e from 30 to 40 standard 395 more than 50 000 hours UME Minimum Emitting Unit made up of 3 Phillips high power LED with selected BIN Fresnel lens CPU control with THELIGHT software aluminium yoke with 28 pin removable barn doors softbox diffuser hilite quarter half and full silent grid cloth options 28 pin combined with 16mm female Universal 90 264 VAC 90 60Hz 2O0KHz 1x 250A Black anodized extruded aluminium and black powder coated flicker free up to SUUUfps sheet aluminium 24 fps 500 ASA PHOTOMETRICS 2LIGHT STUDIO 5600K 3200K Lux F Stop FE meters Fc F Stop Lux 4000 11 1 3 370 1 342 11 3700 540 4 2 3 50 3 39 41 3 420 170 2 8 16 6 13 2 2 3 140 28 CHROMATITY COORDINATES DIAGRAM SO x y CIE 1931 19 i cw aT cw X VS y phanckian locus Tc lt SOQUK dayfght Tec gt S009K 08 eas e xvsy THELIGHT ah 40 oye 0 7 ccc aq o O 8 tot p mm 55 Q 5 a0 ae y j KAL j a 0 4 ms il own a j oln 01 03 tam ea oo 0 2 ss 0 1 gra 4 AS 0 LM 10 n SS da TR DA Dor ed RR ee 00 01 02 03 04 05 06 O7 08 x Shown on the diagram are the THELIGHT lamp head chromaticity coordinates x y CIE1931 feed and digitally controlled by its Control Unit and they are compared with the reference illuminants These reference illuminants are the Planckian locus radiator set below SOOOK and the CIE daylight reference is set ov
12. e from 30 to 75 standard 395 more than 50 000 hours UME Minimum Emitting Unit made up of 3 Philllips high power LED with selected BIN Fresnel lens CPU control with THELIGHT software aluminium yoke with 28 pin removable barn doors softbox diffuser hilite quarter half and full silent grid cloth options 26 pin combined with 16mm female Universal 90 264 VAC 90 60Hz 2O0KHz 1x 250A Black anodized extruded aluminium and black powder coated flicker free up to SUUUfps sheet aluminium 24 fps 500 ASA PHOTOMETRICS 4LIGHT STUDIO 5600K 3200K Lux F Stop Fc meters Fc F Stop Lux 7000 16 1 3 650 1 580 16 6800 900 5 6 1 3 83 3 78 5 6 740 300 2 8 1 3 28 6 26 2 8 1 3 280 26 COLOUR TEMPERATURE LIGHT INTENSITY GREEN MAGENTA BIAS DMX CRI DIMENSIONS WEIGHT OPERATION TEMPERATURE COOLING PROTECTION POWER DRAW POWER CONNECTION BEAM ANGLE LED RATED LIFE THELIGHT LED TECHNOLOGY RIGGING ACCESSORIES POWER SUPPLY INPUT FREQUENCY OUTPUT FREQUENCY FUSE CONSTRUCTION amp FINISH SLIGHT STUDIO adjustable from 2500K a 6500K 100K increments dimmable with minimal colour shift 1 2 stop increments adjustable 1 4 y 1 8 steps from 2500K to 5600K XLRO in amp out connectors g 340 x 155 x 148 mm 4 3 kg including yoke from 20 C to 40 C no noise fan free passive cooling IP21 indoor or outdoor protected use QOW Nominal 73W Maximum Neutrik PowerCon in amp out connectors variab
13. er 5000K The Planckian locus radiator references the chromaticity for several tungsten lamps colour temperatures while the daylight locus typify daylight type D illuminants The diagram evidence the light emanated by THELIGHT luminary at every colour temperature entirely matches with the described locus reference so that the colour of the light produced is essentially the same as incandescent and daylight It is also remarkable the minimum green magenta deviation over the locus reference along the range of colour temperatures means minimal difference between THELIGHT chromaticity coordinates and the ideal reference line CALIBRATION The Instrument Systems scanning spectrometer model Spectro 320 serial number 30932004 with its accessory TOP 100 has been calibrated according to the United States National Institute of Standards NIST and the german Physikalisch Technische Bundesanstalt PTB standard references ACCURACY The Instrument Systems scanning spectrometer model Spectro 320 serial number 30932004 with its accessory TOP 1Q00 has an imprecision over the spectral radiometric results delivered lower than 1 Specifications subject to change without notice THELIGHT technology is protected under Spanish license laws with international patents pending THELIGHT luminary for cine and tv S L www thelight com es 29 REGULATIONS This equipment is designed to meet the following regulations and safety standards for battery powered techn
14. er washers between the Yoke and the LED panel E O O SOS DO STUDIO M8 amp hinge bolts xo M8 metal washers x2 M8 rubber washer xo M6 metal washers x2 M6 Adjustable handle x1 BONS ATTENTION On order to get the full swivel movement set the yoke exactly as shown in the picture 14 2 Connecting the AC PowerCon cable to the STUDIO LED panel Connect the power cable to the AC IN blue plug located in the rear side of the STUDIO LED panel Align and insert the PowerCon power connector to the blue AC IN plug located in the rear side of the STUDIO LED panel Twist the connector clockwise until it locks into place Connect the power plug with a mains power outlet To daisy chain power use the blue power plug as AC IN and the grey power plug as AC OUT Disconnecting the AC PowerCon cable Slide back the locking tab to unlock twist the connector counterclockwise and then pull and disconnect the PowerCon AC connector To avoid electric shocks and or damages in the equipment the Danger power switch located at the STUDIO rear digital panel must be off before connecting or disconnecting cables 3 Security cables The LED panel is provided with several holes ws specially design to insert one o more 9mm snaps and their safety cable When the lamp head and any other component is mounted in a hanging position it must be secured with a safety cable rated at a minimum of ten times the weight of the light fixture including its ac
15. he light equipment that is components required to maintain the functions and quality of the fixture will be available for a period of five years after the product is discontinued THELIGHT Luminary for cine and tv S L www thelight com es The total or partial reproduction of this guide is prohibited without the express written permission of THELIGHT THELIGHT technology is protected under Spanish license laws with international patents pending Information and specifications in this document are subject to change without notice 2012 Copyright THELIGHT All rights reserved 33 TX UIT THELIGHT Luminary for cine and TV S L www thelight com es 2012 Copyright THELIGHT All rights reserved 34
16. ight industrial STANDARD EN 61000 6 1 2005 Electromagnetic Compatibility Generic immunity standard Residential and light industry EN 61000 6 3 2005 Electromagnetic Compatibility Generic EMI standard Residential and light industry IEC EN 61000 6 4 2005 Generic Industrial environments emission radiated EN 301489 1 v1 8 1 2008 02 Radio Electric Spectrum 1 6 GHz Band EN 61000 3 2 2001 A2 2006 Harmonic current emissions a c Mains EN 61000 3 3 1997 A2 2006 Voltage fluctuations and Flicker a c Mains UNE EN 55015 2007 A1 2008 A2 2009 EMI of electrical lighting and similar equipment CISPR 15 2005 EN 55015 1 2006 Lighting and similar equipment radioelectric radiation conducted emissions radiated current Badalona 27th August 2012 Javier Fdez De Valderrama Authorized Administrator 32 WARRANTY THELIGHT high power LED light equipments are guaranteed to be free from defects in workmanship and parts in a warranty period of two 2 years from the date of purchase Defects that occur within this warranty period under normal use and care will be repaired or replaced at THELIGHT discretion solely at our option with no charge for parts or labour In the event of the equipment malfunction contact the dealer from which you purchased the product Please note that you will be not be reimbursed for the cost of bringing the equipment to the THELIGHT Repair Centre THELIGHT reserves the right to replace the product or rele
17. ign the following two channels If you wish to control several THELIGHT fixtures at the same values you will have to set them to the same address If you wish to control several THELIGHT fixtures independently you will have to offset their address by 3 channels Example fixture1 address O01 fixture2 address 004 fixtureS address 007 DMX Channels When you connect your console to the VAC Control Unit you will be able to control THELIGHT fxtures through 3 channels Channel 1 start address COLOUR TEMPERATURE From 2 9 to 6 5 from 2500Kelvin to 6500Kelvin Fader at O 2 0 means 2500Kelvin Fader at 100 6 5 means 6500Kelvin Channel 2 start address 1 DIMMER Channel 3 start address 2 GREEN MAGENTA correction fader at 0 1 4 Green fader at 29 1 8 Green fader at 50 standard position green magenta at 0 fader at 75 1 8 Green fader at 100 1 4 Green Do not use microphone cables or other general purpose two core cables designed for audio or signal use They are not suitable for DMX 512 Problems due to wrong cabling may not be immediately perceptible Microphone cables may appear to work fine but systems built with such cables may fail or be susceptible to random errors Cable must comply with RS 465 DMX protocol EIA485 A DMX terminator should be plugged into the final empty OUT connector of the last slave on the daisy chain A terminator is a stand alone male connector with a built in 120 Q resistor matching the
18. ility for servicing the product locally or bearing the expenditure incurred thereof The total or partial reproduction of this guide is prohibited without the express written permission of THELIGHT THELIGHT technology is protected under Spanish license laws with international patents pending Information and specifications in this document are subject to change without notice 2012 Copyright THELIGHT All rights reserved SAFETY PRECAUTIONS Various symbols are used throughout this instruction manual and on the product to prevent physical harm to you or other people and damage to property The symbols and their meanings are explained below N Warning Possible risk of injury or damage to equipment Dancer This symbol indicates the risk of electric shock or fire danger that could g result in injury or damage to equipment This equipment has been checked and meets the requirements of general safety for electronic devices hese requirements are specified to provide a reasonable protection against electromagnetic interferences when the equipment is used in commercial environments This equipment generates uses and can emit waves of radio frequency and if not properly used following the instructions of this manual can produce interferences in radio communications The use of this equipment in residential areas can produce interference the user will be the only responsible of correcting them CAUTION Though the light generated by LED
19. lation Digital Adjustments ssa onae Turning the power On Off COLOR TEMPERATURE PAS Me eo sea tes toes e ROR EE IN DMA 9 e Controls Mechanical Adjustments Beam Angle VARA LON sas Essas A TL Cl COS INSANA BIOT st tecnica cesta adc A Softbox diffuser installation SPECICATION S A eee eee Chromaticity coordinates diagram Regulatora en E Declaration of conformity Warranty 1 MAIN FEATURES THELIGHT STUDIO are LED panels housing Phillips high power LED They had been specially designed and their colorimetry calibrated for professional photography cinematography and television industry use THELIGHT luminaries main innovative features are e Variable Colour Temperature with almost no lost in light output e Stable colour dimming e Green magenta correction e Adjustable light beam from 30 up to 125 without changing lenses e Silent fan free operation e High power Phillips LED 50 000 hours life e 90 CRI digitally calibrated light e Robust aluminium construction e Digital control and through DMX e Flicker free up to 3 000 fps e Very high light output e Low power draw NOTE ABOUT MEASURING COLOUR TEMPERATURE CCT THELIGHT STUDIO incorporate the innovative THELIGHT technology based on Phillips high power LED triplets Fresnel lens CPU control software to obtain the wide range of calibrated colour temperatures combined with a high colour rendering index CCT We must remark that colour meters in use today are designed for a
20. le from 30 to 60 standard 395 more than 50 000 hours UME Minimum Emitting Unit made up of 3 Phillips high power LED with selected BIN Fresnel lens CPU control with THELIGHT software aluminium yoke with 28 pin removable barn doors softbox diffuser hilte quarter half and full silent grid cloth options 26 pin combined with 16mm female Universal 90 264 VAC 90 60Hz 2O0KHz 1x 250A Black anodized extruded aluminium and black powder coated flicker free up to SUUUfps sheet aluminium 24 fps 500 ASA PHOTOMETRICS SLIGHT STUDIO 5600K 3200K Lux F Stop Fc meters Fc F Stop Lux 5500 11 2 3 510 1 510 11 2 3 5500 800 5 6 1 3 14 3 65 5 6 700 210 2 8 1 3 19 E 18 2 8 190 21 COLOUR TEMPERATURE LIGHT INTENSITY GREEN MAGENTA BIAS DMX CRI DIMENSIONS WEIGHT OPERATION TEMPERATURE COOLING PROTECTION POWER DRAW POWER CONNECTION BEAM ANGLE LED RATED LIFE THELIGHT LED TECHNOLOGY RIGGING ACCESSORIES POWER SUPPLY INPUT FREQUENCY OUTPUT FREQUENCY FUSE CONSTRUCTION amp FINISH 2LIGHT STUDIO adjustable from 2500K a 6500K 100K increments dimmable with minimal colour shift 1 2 stop increments adjustable 1 4 y 1 8 steps from 2500K to 5600K XLRO in amp out connectors g 340 x 108 x 148 mm 3 7 kg including yoke from 20 C to 40 C no noise fan free passive cooling IP21 indoor or outdoor protected use 3 W Nominal 49W Maximum Neutrik PowerCon in amp out connectors variabl
21. ology equipment ENVINRONMENTAL THELIGHT devices are certified and intended for indoor use IP21 LAMP HEAD OPERATION TEMPERATURE from 20 to 40 C OPERATING HUMIDITY from 30 to 90 RH non condensing FUSE 1x2 50A CE REPORT ELECTROMAGNETIC COMPATIBILITY Tost Laboratory CE mark TESTS AND MEASURES REQUESTED ENE DT ama dy 30 om 5 telproce Laboratorio de Ensayos marcado CE Tess Laboratory CE mark 22 ve momo ds Cantos o Bo Ow her lg re M a eo ee ee mma ARET ee Serr 31 DECLARATION OF CONFORMITY TO EMC DIRECTIVE 2004 1086 EC MANUFACTURER S NAME Thelight luminary for cine and tv S L MANUFACTURER S ADDRESS Plaza Val 1 22148 Colungo HUESCA SPAIN info thelight com es www thelight com es declares that the products MODELS 4LIGHT LED panel 6LIGHT LED panel 4LONG LED panel VDC Control Unit VAC Control Unit AC DC Control Unit 4LONG STUDIO 3LONG STUDIO 2LONG STUDIO 6LIGHT STUDIO 5SLIGHT STUDIO 4LIGHT STUDIO 3LIGHT STUDIO 2LIGHT STUDIO MANUFACTURED BY Thelight luminary for cine and tv S L MANUFACTURED IN Badalona BARCELONA SPAIN MARK THELIGHT COMPLY WITH THE CE DIRECTIVES GENERAL SECURITY 2001 95 CE EN 60598 1 2003 A1 2006 Luminaries general requirements DIRECTIVE 2004 108 CE Electromagnetic Compatibility E M C ELECTROMAGNETIC COMPATIBILITY THELIGHT is intended to Electromagnetic Environment E2 Commercial and l
22. omaticity THELIGHT guarantees the correct colorimetry for light emitting from their high power LED light fixtures calibrated in the laboratory according to current international standards of the CIE 13 3 1995 for the average CHI and the chromatic co ordinates x y CIE 1931 This certifies that our luminaries have no green magenta deviation NOTE Full adjustment is possible in a range of colour temperatures from 2500K to 5600K From 5600K to 6500K the adjustment is only possible on 1 8 and 1 4 plusgreen 17 7 DMX 512 CONTROL THELIGHT STUDIO lightning fixtures have been designed for a full DMX control from the Spin DMX port located at the back of the fixture Connect the DMX cable coming from your console into the DMX IN male connector located at the back of the fixture Beside the DMX IN there is also a DMX QUT connector to daisychain fixtures Adressing channels Push both and COLOR TEMPERATURE buttons at the same time and then switch on the power button Wait a few seconds for the three digital displays to blink Now you can define the start address To do so just push the or DIMMER buttons to increase or decrease the first fixture address Once you have chosen the desired address number push the GREEN button to save the selection Keep in mind the following points regarding DMX control THELIGHT DMX protocol uses 3 channels per fixture After the DMX address is entered the digital control will automatically ass
23. osed by YUGHT STUDIO Articulated panel formed by two compact aluminium strips housing 48 Phillips high power LED Power draw 46W SUGHT STUDIO Articulated panel formed by three compact aluminium strips housing 72 Philips highpower LED Power draw 69W ga 5 e er 100109 8 A 4LIGHT STUDIO Articulated panel formed by four compact aluminium strips housing 96 Phillips highpower LED Power draw 92W SUGHT STUDIO Articulated panel formed by five compact aluminium strips housing 120 Phillips highpower LED Power draw 115W 000000cc 00006 V C00000 cce so DA OUGHT STUDIO Articulated panel formed by six compact aluminium strips housing 144 Phillips highpower LED Power draw 138W 4 ei 0000004 Se A A DR q D rat cqopio Gan E Kr GB a YLONG STUDIO Articulated panel formed by two long aluminium strips housing 96 Phillips highpower LED Power draw 99999999 99999999 9999999999999999 SLONG STUDIO Articulated panel formed by three long aluminium strips housing 144 Phillips highpower LED Power draw 138W 39999999 99999999 9099999999999999 9099999999999999 4LONG STUDIO Articulated panel formed by four long aluminium strips housing 192 Phillips highpower LED Power draw 184W Q VVVVV A BABAK V000C OCO econ D OPERAR 06 33 3 9 3 COMPONENTS AND ACCESSORIES Each THELIGHT STUDIO high p
24. ower LED panel can be composed by the following parts 1x THELIGHT STUDIO high power LED panel VV VV gag QU RRA XD 00000000068 EEE 00606006 666666 2x Removable barn doors ref 4L RB valid for every LONGSTUDIO panel ref 4S RB valid for every LIGHT STUDIO panel 11 1x 2 meters PowerCon to mains power cable with Schuko plug ref PVVR ACC2m 1x Softbox diffuser Quarter kit composed by 2x metal side wings 1x Hilite softbox diffuser Available softbox diffusers on request e Hilite e Quarter silent grid cloth e Half silent grid cloth e Full silent grid cloth Q E 12 4 NAMES AND PARTS THELIGHT STUDIO high power LED panel Rear view Y UCG DOOU STUDIO ES WMAOMOONDOKRWD gt 45 67 8 9 10 11 12 PowerCon AC out XLR DMX out XLR DMX in Colour temperature digital display Colour temperature adjustment buttons Intensity level digital display Intensity adjustment buttons Green magenta adjustment button Green magenta offset status LED Fuseholder Power switch PowerCon AC in Yoke locking handle 13 13 o PLACING INTO OPERATION 1 Yoke to LED panel assembling Align the adjustable Yoke with the STUDIO LED panel as shown in the picture Assemble the Yoke to the LED panel by using the mounting kit of bolts washers and adjustable handle First mount the handle with two metric M6 metal washers then fix the two M8 bolts using the metric M8 metal washers and Inserting the M8 rubb
25. standard 395 more than 50 000 hours UME Minimum Emitting Unit made up of 3 Philllips high power LED with selected BIN Fresnel lens CPU control with THELIGHT software aluminium yoke with 28 pin optional quick link swivel ball head removable barn doors softbox diffuser hilite quarter half and full silent grid cloth options Universal 90 264 VAC 90 60Hz 2OKHz 1x 250A Black anodized extruded aluminium and black powder coated flicker free up to SUUUfps sheet aluminium 24 fps 500 ASA PHOTOMETRICS 3SLONG STUDIO 5600K 3200K Lux F Stop Fc meters Fc F Stop Lux 11000 22 1018 1 925 16 2 3 10000 1400 8 129 3 110 5 6 2 3 1200 450 4 41 E 35 2 8 2 3 380 22 COLOUR TEMPERATURE LIGHT INTENSITY GREEN MAGENTA BIAS DMX CRI DIMENSIONS WEIGHT OPERATION TEMPERATURE COOLING PROTECTION POWER DRAW POWER CONNECTION BEAM ANGLE LED RATED LIFE THELIGHT LED TECHNOLOGY RIGGING OPTIONS ACCESSORIES POWER SUPPLY INPUT FREQUENCY OUTPUT FREQUENCY FUSE CONSTRUCTION amp FINISH 2LONG STUDIO adjustable from 2500K a 6500K 100K increments dimmable with minimal colour shift 1 2 stop increments adjustable 1 4 y 1 8 steps from 2500K to 5600K XLRO in amp out connectors gu 622 x 108 x 148 mm 4 4 kg including yoke from 20 C to 40 C no noise fan free passive cooling IP21 indoor or outdoor protected use 74W Nominal 98W Maximum Neutrik PowerCon in amp out connectors variable from 30 to
26. ted on the lamp head ocrew the captive screws to attach the two side wings to the lamp head set the barn doors open as shown in the picture Wrap the Softbox cloth around the side wings and barn doors y pA X Pe Te Te ToTo 5 gt gt x sa rr mm o i The 4 silent grid cloth Softbox softens and broadens the light beam with minimal colour ee temperature shift Excellent for softening harsh edges SOFTBOX CLOTH FLAMEPROOF RATING The softbox has been manufactured with Cinebounce black cloth which meets the flameproof standard UNE EN 13773 2003 class 1 20 9 SPECIFICATIONS COLOUR TEMPERATURE LIGHT INTENSITY GREEN MAGENTA BIAS DMX CRI DIMENSIONS WEIGHT OPERATION TEMPERATURE COOLING PROTECTION POWER DRAW POWER CONNECTION BEAM ANGLE LED RATED LIFE THELIGHT LED TECHNOLOGY RIGGING OPTIONS ACCESSORIES POWER SUPPLY INPUT FREQUENCY OUTPUT FREQUENCY FUSE CONSTRUCTION amp FINISH 4LONG STUDIO adjustable from 2500K a 6500K 100K increments dimmable with minimal colour shift 1 2 stop increments adjustable 1 4 y 1 8 steps from 2500K to 5600K XLRO in amp out connectors 90 622 x 205 x 146 mm 7 6 kg including yoke from 20 C to 40 C no noise fan free passive cooling IP21 indoor or outdoor protected use 147W Nominal 196W Maximum Neutrik PowerCon in amp out connectors variable from 30 to 75 standard 3
27. vant part with the same or equivalent product or part rather than repair it Where a replacement is provided the products or part replaced becomes the property of THELIGHT THELIGHT may replace parts with refurbished parts Replacement of the product or a part does not extend or restart the Warranty period Returns or exchanges from the customers will be accepted within 15 days of delivery and will not include the actual shipping costs Item s must be in original packaging and condition must not be assembled and must include its original user manual This warranty does not cover any damage resulting from Failure to follow the instructions in the instruction manual Repair modification or overhaul not conducted by any authorized THELIGHT personnel Fire natural disaster act of God lightning abnormal voltage etc submergence in water flooding exposure to alcohol or other beverages infiltration of sand or mud physical shock or dropping of the equipment and other unnatural causes This warranty only applies to the lamp head and the Control Unit and not to the accessories such as the diffuser or barn doors nor does it apply to the fuses and other consumables provided Any consequential damages arising from failure of the equipment such as expenses incurred in taking pictures or recording images or loss of expected profit will not be reimbursed whether they occur during the warranty period or not Parts essential to the servicing of t
Download Pdf Manuals
Related Search