RFID Reader - Samsung CCTV
Contents
1. Data 0 Out Green Pe RS 282 GND Black EG Wiegand Data 1 Out White SAMSUNG mg Black DC 412V GND POWER Item Cable Color Connect the DC 12V to the red line Power Supply Unit Connect GND to the black line Connect the green line of the product to the Wiegand DO input port of the controller Wiegand Connection Connect the white line of the product to the Wiegand D1 input port of the controller LED Control To control the LED indicators connect the yellow line to the output port relay of the controller Buzzer Cie To control the built in buzzer connect the blue line to the output port relay of the controller RS 232 Connection Connect to the COM port of the PC Connect pin 2 of the DB 9 connector to the brown line connect the GND black line of the device to pin 5 of the DB 9 connector 10_ installation and external connection intalization BASIC OPERATIONS Initial State when the power is supplied When you apply power to the reader it will sound a beep before entering Standby with the red indicator turned on Using the card NOILVZITVILINI Present the card to the reader until you hear a beep and the red indicator turns green When the reader has transferred the card data to the controller it retums to Standby with the red indicator turned on and waits for reading the next card E LED Control You can control t2. English 15 SALES NETWORK SAMSUNG TECHWIN CO LTD Samsungtechwin R amp D Center 701 Sampyeong dong Bundang gu Seongnam si Gyeonggi do Korea 463 400 TEL 82 70 7147 8740 60 FAX 82 31 8018 3745 SAMSUNG TECHWIN AMERICA Inc SAMSUNG TECHWIN EUROPE LTD 1480 Charles Willard St Carson CA 90746 UNITED STATES Samsung House 1000 Hillswood Drive Hillswood Business Tol Free 1 877 213 1222 FAX 1 310 632 2195 Park Chertsey Surrey UNITED KINGDOM KT16 OPS www samsungcctvusa com TEL 44 1932 45 5300 FAX 44 1932 45 5325 www samsungsecurity com www samsungtechwin com Z8100239401A
3. SSA R1003 SSA R1103 REIL Reader user manual imagine the possibilities Thank you for purchasing this Samsung product To receive more complete service please visit our website www samsungsecurity com safety information RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit important operating and maintenance servicing instructions in the literature This exclamation point symbol is intended to alert the user to the presence of accompanying the appliance WARNING e To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture WARNING 1 Be sure to use only the standard adapter that is specified in the specification sheet Using any other adapter could cause fire electrical shock or damage to the product 2 Incorrectly connecting the power supply or replacing battery may cause explosion fire electric shock or damage to he product Do not connect multiple controllers to a single adapter Exceeding the capacity may cause abnormal heat generation or fire Securely plug the power cord into the power receptacle Insecure connection may cause fire When installing the controller fasten it securely an
4. d firmly The fall of controller may cause personal injury DN pA sm Do not place conductive objects e g screwdrivers coins metal parts etc or containers filled with water on top of the controller Doing so may cause personal injury due to fire electric shock or falling objects N Do not install the unit in humid dusty or sooty locations Doing so may cause fire or electric shock 8 If any unusual smells or smoke come from the unit stop using the product In such case immediately disconnect the power source and contact the service center Continued use in such a condition may cause fire or electric shock 9 If this product fails to operate normally contact the nearest service center Never disassemble or modify this product in any way SAMSUNG is not liable for problems caused by unauthorized modifications or attempted repair 10 When cleaning do not spray water directly onto parts of the product Doing so may cause fire or electric shock CAUTION 1 Do not drop objects on the product or apply strong blows to it Keep away from a location subject to excessive vibration or magnetic interference 2 Do not install in a location subject to high temperature over 50 C low temperature below 30 C or high humidity Doing so may cause fire or electric shock 3 If you want to relocate the already installed product be sure to turn off the power and then move or reinstall it 4 Remove the power plug from the outl
5. e harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help IMPORTANT SAFETY INSTRUCTIONS Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions PO NOAKR ON 3 Do not install near any heat sources such as radiators heat registers or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an elect
6. et when there is a lighting storm Neglecting to do so may cause fire or damage 0 the product 5 Keep out of direct sunlight and heat radiation sources It may cause fire install it in a place with good ventilation 7 Avoid aiming the controller directly towards extremely bright objects such as sun 2_ safety information 8 Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus 9 The Mains plug is used as a disconnect device and shall stay readily operable at any time FCC Statement Caution Any changes or modifications in construction of this device which are not expressiy approved by the party responsible for compliance could void the user s authority to operate the equipment This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions any caus
7. he LED indicator of the device at your preference Connect the LED control input line yellow to the NO port of the controller relay output and GND to the COM port Set the I O of the controller so that you can change the color of the LED indicators While the LED control is working the green indicator stays solid This function not only enables you to change the color representing Standby from red to green but it can be also applied to make various modifications according to the different I O settings of the controller For more information about the I O settings of the controller refer to the user manual of the controller Buzzer Control You can control the buzzer of the device at your preference You can configure the I O settings of the controller so that it sounds a beep While the buzzer control is working the product keeps sounding the beep The controller can use the I O settings to set the buzzer control so that it sounds an additional beep for authorized or unauthorized access upon user authentication Furthermore you can make various modifications according to the different I O settings of the controller For more information about the I O settings of the controller refer to the user manual of the controller Oo Card reading is not available while the buzzer control is sounding the buzzer English 11 output format WIEGAND OUTPUT Timing Diagram 100us Ak a 5V DATA 0 ms 0V Data Ty
8. he end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for EEE details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal Correct disposal of batteries in this product Applicable in the European Union and other European countries with separate battery return systems This marking on the battery manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life Where marked the chemical symbols Hg Cd or Pb indicate that the battery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed of these substances can cause harm to human health or the environment To protect natural resources and to promote material reuse please separate batteries from other types of waste and recycle them through your local free battery return system
9. mity reader which has the maximum read range of 10cm 4 can be easily installed on a metal doorframe or the wall Basically both R1003 and R1 103 use the same module with epoxy molding which guarantees operation in any weather and environment condition The two different bezels of two models are compatible with each other meaning one can be replaced with the other according to the wall condition or the applicable situation Green and red LED indicators and the Piezo buzzer ensure reliable and accurate operations 125KHz Proximity Reader ASK Modulation 26bit Wiegand RS 232 Output Format Control of External LED Indicators Control of External Buzzer Reverse Polarity Protection Weatherproof WHAT S INCLUDED Check if the following items are included in the product package What s included in SSA R1003 E Quick Guide 3 5 x 40 screws x2 Bezel of SSA R1003 3 5 x 25 screws x2 Quick Guide CD Manual 6x 30 Plastic Anchors x2 What s included in SSA R1103 EI Quick Guide 3 5 x 40 screws x2 Bezel of SSA R1103 3 5 x 25 screws X2 Quick Guide CD Manual 6 x 30 Plastic Anchors x2 English _ 5 NOILONGOHINI LONGOdd product Introduction AT A GLANCE Front Rear SAMSUNG 1 LED Displays the system operation status using red and green indicators 2 Buzzer Piezo buzzer 3 Connection Cable Used to connec
10. module into the bezel and push it up until you hear a click Upper 6 32 hole Q 1 7 TOOT stem 3 3 Q 6 32 or M3 Screws 6 32 or M3 Screws 838m 1 2 hole 4 ng _ S men acas Lower Reader Fa SAMSUNG SAMSUNG Bezel Bezel Wall Mount Mullion Mount Electric Gang Box Mount 8 installation and external connection PRECAUTIONS ON INSTALLATION If installing on a metal wall If you install the reader on a metal wall the read range may be reduced To avoid this problem it is recommended to insert the spacer between the metal wall and the reader as shown below Spacer Reader If installing more than one reader side by side or front and back If you install more than one reader side by side or front and back the read range may be reduced In this case if you present a card to one reader the other reader may recognize the same card meaning both readers read the same card simultaneously To avoid this problem keep at least 20 cm of space between the two readers nn Reader 1 Minimum 20cm Reader 2 Reader 1 Reader 2 lt Front and Back gt lt Side by Side gt English _ 9 NOLLOANNOO TWNYALXA ANY NOILVTIVLSNI installation and external connection EXTERNAL CONNECTION Wiring Diagram SSA R1003 SSA R1 103 Buzzer Control In Blue RS 232 TX Brown LED Control In Yellow CONTROLLER Wiegand
11. onnected to one adaptor make sure that the adaptor should be large enough to cover the current consumption multiplied by the reader count Even with a large adaptor enough to supply adequate power if the power cable is not a dedicated line such as communication line or UPT cable or if it s so long to cause power loss you d better replace it with a dedicated line or reinforce it f the problem persists contact the nearest customer service for your assistance 14_ troubleshooting product specifications PRODUCT SPECIFICATIONS Item SSA R1003 SSA R1103 Power Current DC 12V Max 40mA Reading Time Card 30ms Input Port 2ea External LED Control Extemal Buzzer Control Output Port 26bit Wiegand LED Indicator 2 Color LED Red and Green Beeper Piezo Buzzer Operating Temperature 30 C to 50 C Operating Humidity 10 to 90 relative humidity non condensing Color Material Silver with Black Polycarbonate Dimension W x H x D mm 47 0 x 122 0 x 26 0 75 3 x 122 0 x 26 0 Weight 130g 150g Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at t
12. pe e Bit 1 Even Parity bit 2 bit 13 e Bit 2 9 Facility Code 000 255 e Bit 10 25 ID Number 00000 65 535 e Bit 26 Odd Parity bit 14 bit 25 12_ output format RS 232 OUTPUT Output Waveform Indeterminate ov Region N EE EEE S EE chad ae E Cocca Mark 1 Ken qu DataBits ti j Start Bit 2 Stop Bits it Data packet corresponding to ASCII character A gt Data Type Start 0X02H Data 8 Char End Ox03H LRC START 0X02H DATA 1 8 Char END 0x03H LRC NG Check the following settings Baud Rate 9600bps Data Bit 8 Parity Bit None Stop Bit 1 LRC This is the result of XOR operation of each byte from Start to End English 13 LVWNHO4 LNdLNO troubleshooting TROUBLESHOOTING If the product does not function properly please see the below for trouble shooting PROBLEM My card is not read properly SOLUTION Check the rated voltage specified in the user manual and the catalog Check if this is a 125KHz proximity EM format card f the problem persists contact the nearest customer service for your assistance When turn on the product it sounds a beep with dimly turned on indicator Ensure that you are using a larger capacity adaptor than specified in the user manual or the catalog which should cover the rated current consumption of the reader If you are using multiple readers that are c
13. rician for replacement of the obsolete outlet 1 o Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus 1 ev Unplug this apparatus when a card is used Use caution when moving the cart apparatus combination to avoid injury from tip over 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as powersupply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped English 3 NOILVINYO4NI AL34VS Contents PRODUCT INTRODUCTION INSTALLATION AND EXTERNAL CONNECTION INITIALIZATION OUTPUT FORMAT TROUBLESHOOTING PRODUCT SPECIFICATIONS 4 contents NNOO O Qo 11 12 13 14 15 Features What s included At a Glance Cable Color Scheme Cable Selection Installation Precautions on installation External Connection Basic Operations WIEGAND Output RS 232 Output Troubleshooting Product Specifications product Introduction FEATURES This product is an elegant looking proxi
14. t to the power or O cable 4 Fixing Hole Fixing hole for wall mounting 6_ product introduction CABLE COLOR SCHEME Item Cable Color Signal Line Description Red DC 12V DC 12V supplied Power Black GND Earth grounding for power Blue Buzzer Control BUZZER Control Input Port Input Yellow LED Control LED Control Input Port Green Out Wiegand 0 Wiegand Data 0 Output Port Output White Out Wiegand 1 Wiegand Data 1 Output Port Communication Brown RS 232 TX RS 232 Transmission Output Port Not used Orange NC Not Connected CABLE SELECTION Item Cable Type 1 Power DC12V Belden 9409 18 AWG 2 Conductor Unshielded WIEGAND Output Belden 9512 22 AWG 4 Conductor Shielded 2 Buzzer Control LED Control Belden 9514 22 AWG 8 Conductor Shielded 3 Rs 232 Cable Belden 9829 24 AWG 2 twisted pair Shielded English _ 7 NOILONGOHINI LONGOdd installation and external connection INSTALLATION Inserted in the doorframe attached to the wall 1 Two 6 32 or M3 holes are 3 3 8 38 cm away from each other vertically between the two exists one 1 2 hole through which the reader cables are arranged The midway hole is located 1 7 4 31cm down from the upper hole If the product is already installed you can skip this step 2 Insert the reader cables to the midway hole and fix the reader module with two 6 32 or M3 screws 3 Insert the reader
Download Pdf Manuals
Related Search