Hasselblad Proshade
Contents
1. Tele Tessar CF 5 6 350 mm Tele Superachromat CFE 5 6 350 mm Sa Tele Apotessar CF 8 500 mm Distagon FE 2 8 50 mm Planar FE 2 8 80 mm Planar FE 2 110 mm Sonnar FE 2 8 150 mm Tele Tessar FE 4 250 mm Tele Tessar FE 4 350 mm Hasselblad FE 4 8 60 120 mm Adapter xxxxxx xx X gt lt gt lt XK KK MXM M MX OK OK MX M MM MXM M MX M M All Clenses with 950 front bayonet need the 850 860 Step up Ring 3040711 combined with the Proshade 60 Lens Adapter Use the Proshade CF amp C 250 Mask HASSELBLAD www hasselblad com Proshade V H 60 95 2011 v4 PROSHADE V H 60 95 USER MANUALS Item no 3053300 H lenses HCD 4 28 mm not recommended due to vignetting HC 3 5 35 mm HC 3 5 50 mm HC 3 5 50 mm ll HC 2 8 80 mm HC 2 2 100 mm HC Macro 4 120 mm HC Macro 4 120 mm ll HC 3 2 150 mm HC 4 210 mm HC 4 5 300 mm HCD 4 5 6 35 90 mm HC 3 5 4 5 50 110 mm Vlenses Biogon CF CFi 4 5 38 mm Distagon CF CFE 4 40 mm IF and earlier types Distagon CF 4 50 mm Distagon CFi 4 50 mm Distagon CF CFi 3 5 60 mm Planar CF CB CFE 2 8 80 mm Planar CF CFi 3 5 100 mm Makro Planar CF CFE 4 120 mm Sonnar CF CFi 4 150 mm Sonnar CF CFE 4 180 mm Sonnar CF CFi 5 6 250 mm Sonnar CF CFi CFE 5 6 250 mm Sa Tele Tessar CF 5 6 350 mm Tele Superachromat CFE 5 6 350 mm Sa Tele Apotessar CF 8 500 mm Distagon FE 2 8 50 mm Planar FE 2 8 80 mm Planar FE 2 110 mm So2. H adapter proceed as follows 1 Ensure the locking lever on the adapter is in the raised position fig 3 2 Align the triangular index mark on the adapter against the central index on the lens 3 Push the adapter towards the lens and turn clock wise until it stops approx Vs turn fig 4 4 Secure the adapter by pushing the locking lever back into the locked position fig 5 960 or 970 adapter bayonet mount 1 Align the triangular index mark on the adapter against the central index on the lens 2 Push the adapter towards the lens and turn clock wise until it stops approx Vs turn 93 adapter screw mount 1 Screw the rear ring of the lens shade 993 40 50 or 350 500 onto the lens fig 6 2 Screw the 93 adapter into place P When screwing mounts and adapters ensure they run freely together and do not force them Resistance implies incorrect positioning P An H95mm adapter 3043419 cannot be used when a 95mm filter UV Sky 95mm 3053478 C Pola 95mm 3053490 is fitted to the lens For transport purposes the guide bar on the Proshade is normally folded back It has a spring loaded captive bolt which automatically snaps into place when the guide bar is folded out into the working position To return it to the folded po sition the bolt must first be unscrewed and then pulled a little way out of the bar and held out while folding back To set up the Proshade proceed as follows 1 Fold out the
3. guide bar on the Proshade until it snaps into place fig 7 2 Tighten the guide bar locking bolt until it stops about four turns 3 Adjust the position of the rear frame by squeezing the fixing clamp and sliding the frame along the guide bar fig 8 For V lenses position the marker on the frame against the corresponding focal length of the lens in use on the scale on the V lens type scale For H lenses position the marker on the frame against the corresponding focal length of the lens in use on the scale on the H lens type scale 4 TheProshade is now ready to be attached to the lens Attaching the Proshade 9 10 With an H 960 or 970 adapter fitted to the lens proceed as follows 1 Position the Proshade against the lower retaining lugs on the adapter fig 9 so that the white ring symbol on the adapter aligns with the white spot on the Proshade lock 2 Press the Proshade against the adapter on the top edge so that they snap together 3 Rotate the Proshade so that the white spot on the adapter now aligns with the white spot on the Proshade fig 10 Ensure that the Proshade lock clicks into place Using the Proshade 11 Ensure that when you change lenses you also change the position of the shade in accordance with the focal length of the lens When using the V system 250 mm lenses the Proshade mask 6093 250 should additionally be at tached to ensure the optimum effect It slides into position betwe
4. PROSHADE V H 60 95 USER MANUALS Item no 3053300 HASSELBLAD 1 6 www hasselblad com Proshade V H 60 95 2011 v4 USER MANUALS LO to gt Lu m lt T 7 e C A o 3053300 tem n a x ba a N W 72 V lt Item no 3053300 PROSHADE V H 60 95 0Y1813SSYH USER MANUALS Proshade V H 60 95 The Hasselblad Proshade V H 60 95 3040740 is designed to fit virtually all lenses with the appropri ate adapters in both the V and the H systems the Distagon CFi 30 mm and the Tele Superachromat FE 300 mm are the two exceptions It provides precise control of shading to prevent degradation of the im age caused by stray light or direct light on the front element of the lens The Hasselblad Proshade V H 60 95 can also func tion as a filter holder for glass gelatine or optical resin filters accessories not supplied Optional accessories are available to suit the vari ous front bayonet filter mount sizes The figures beside the headings in text refer to the appropriate illustrations Parts and components 1 The Hasselblad Proshade V H 60 95 is supplied with a Proshade mask 6093 250 3040312 1 Proshade mask 6093 250 3040312 Mount slots for Proshade mask Front frame Filter holder catch H lens type scale Lens
5. ad 93 polarizing filter is attached to the lens and Proshade in the same manner as the Proshade 93 lens adapter For further informa tion see the polarizing filter user manual Using a cable release 16 The close proximity of the rear frame of the Proshade to the exposure release button on manual models can cause difficulties with some combinations of cable releases and lenses The use of an open L connector 3050776 will solve this problem however fig 16 Optimal Proshade extension 17 The filter holder can also accept 75 mm square and 100 mm square gelatin or optical resin filters in HASSELBLAD The recommended extension scales are conserva tively given for maximum aperture and infinite fo www hasselblad com Proshade V H 60 95 2011 v4 PROSHADE V H 60 95 Item no 3053300 USER MANUALS cusing distance When stopping down the lens and at closer distances the extension can for some lens types be significantly increased To find the opti mal position proceed as follows 1 Set working aperture and focus distance 2 Remove the magazine focusing screen adapter 3 Replace with the Rear cover MultiControl 3051070 4 Depress the depth of field button on the lens so that the lens stops down to the working aperture Open the shutter set at B Look through each hole in the Rear cover MultiControl in the direction of the lens and com pare what you can see with the illustrations fi
6. adapter mount catch Rear frame clamp Rear frame guide Guide bar locking bolt Guide bar SO NAU tw HASSELBLAD 11 V lens type scale 12 Rear frame with filter holder 13 Bellows Optional accessories 2 1 Proshade adapter 960 3040741 For V series lenses with a 060 front mount The adapter ring permits two glass filters to be attached to the internal front bayonet mount Also used for C lenses 050 with step up ring 050 060 3040711 2 Proshade adapter 970 3040744 For V series lenses with a 070 front mount 3 Proshade adapter 393 3040746 For V series lenses with a 093 front mount 4 Proshade adapter H67mm 3043415 For H series lenses with a 67mm front thread 5 Proshade adapter H77mm 3043417 For H series lenses with a 77mm front thread 6 Proshade adapter H95mm 3043419 For H series lenses with a 95mm front thread Adapters The Proshade is attached to the lens by way of an adapter that fits onto the front lens mount The six different adapters optional accessories are listed above You may find it is easier to fit a bayonet adapter to the Proshade and then the combination to the lens whereas it is easier to fit a screw fit adapter to the lens first and then the Proshade afterwards www hasselblad com Proshade V H 60 95 2011 v4 PROSHADE V H 60 95 USER MANUALS Item no 3053300 Attaching adapters to lenses 3 4 5 6 Setting up the Proshade 7 8 To attach an
7. e room for fingers is obtained if the Proshade is turned 90 or 180 when attached that is with the guide bar un derneath or to the right e When used with wide angle lenses such as the Biogon 4 5 38mm or the Distagon 4 40mm the Proshade extension should be set at zero to avoid the risk of vignetting Please see the Appendix at the end of this manual for a listing of individual lens requirements re garding adapter types and filter mount sizes etc Notrecommended for use with the HCD 4 28 mm due to vignetting Visit www hasselblad com to download user manuals datasheets product brochures technical information technical articles software and firmware updates etc as well as news about the latest developments at Hasselblad Este texto na sua lingua EEEIEE Usar Google Translate na Internet ER BKR PE EAM E Denna text p ditt sprak Hee arar ag T6 Anvand Google Translate p Internet ar vat at Google grama Herde oe Tor Texcr Ha saem Aabike Vicnontayiire Google Nepesonunx Ha ViHTepHeT Seiad p gaill Ja IES VI AS dle Jaya Leo pliki 0000 V lenses Biogon CF CFi 4 5 38 mm Distagon CF CFE 4 40 mm IF and earlier types Distagon CF 4 50 mm Distagon CFi 4 50 mm Distagon CF CFi 3 5 60 mm Planar CF CB CFE 2 8 80 mm Planar CF CFi 3 5 100 mm Makro Planar CF CFE 4 120 mm Sonnar CF CFi 4 150 mm Sonnar CF CFE 4 180 mm Sonnar CF CFi 5 6 250 mm Sonnar CF CFi CFE 5 6 250mm Sa
8. en the main frame and the retaining lugs on the front of the Proshade fig 11 The grip re mains protruding above the frame as a reminder of it being in place when you change lenses Removing the Proshade 12 To remove the Proshade press down the lens adapter mount catch as in the illustration fig 12 While keeping the catch depressed rotate the Proshade so that the white spot on the catch aligns with the white circle on the adapter The Proshade can now be removed Alternatively you can remove the Proshade and adapter together as a unit in which case you re verse the attachment procedures described above for adapter attachment Using gelatine or rigid optical resin filters 13 14 15 card mounts Rigid optical resin filters or similar can be mounted singly or combined up to a maximum thickness of 4mm Proceed as follows 1 Raise the filter holder catch to free the bellows fig 13 2 Allow the bellows to swing down fig 14 to access the filter holder 3 Insert the filter s or filter mount so that the bottom edge is retained by the two lugs fig 15 Swing the bellows section back into place ensuring that the filter holder catch snaps back into place to lock it into place S The swing down function is also useful when you want to check the focus but find the fil ter distracting or you want to change a filter mounted on the front lens bayonet mount Using a 93 polarizing filter The Hasselbl
9. g 17 m The aperture is fully open No shading can be seen and so no vignetting will occur The lens has been stopped down to the desired aperture and produces the ideal situation as no shading is visible No vignetting will occur The lens has been stopped down to the desired aperture but shading is visible However this amount is acceptable for a vignette free result The lens has been stopped down to the desired aperture and more than 50 coverage can be seen Vignetting will occur and will produce a visible result Reduce the amount of bellows extension a Ce texte dans votre langue Utilisez Google Translate sur Internet Diesen Text in Ihrer Sprache Verwenden Sie Google Translate im Internet Este texto en su idioma El uso de Google Translate en Internet 9400 9400 Ouesto testo nella tua lingua Utilizzare Google Translate su Internet Deze tekst in uw taal Gebruik Google Translate op het internet BELDERTLOTFER HE BALTALS A E TOGO gleMERR Special instructions e When attaching the Proshade to lenses of 100m focal length or shorter the shade should be ex tended first to at least 30 mm to avoid interference between the guide bar and the focusing hood When a manually operated camera model is mounted on a flash bracket or similar with a 40 60 or 80 mm lens and a Proshade there is reduced access for fingers between the bracket handle and the guide bar Mor
10. nnar FE 2 8 150 mm Tele Tessar FE 4 250 mm Tele Tessar FE 4 350 mm Hasselblad FE 4 8 60 120 mm x x gt lt gt lt gt lt x x x X SS ES EK SER ES x x X K KOK KOK KOK KOK KO KO KO KOK OKO x The information in this manual is furnished for informational use only is subject to change without notice and should not be construed as a commitment by Victor Hasselblad AB amp Hasselblad A S The text and images in this manual cannot be reprinted or reused without the express permission of Victor Hasselblad AB amp Hasselblad A S Victor Hasselblad AB amp Hasselblad A S assume no responsibility or liability for any errors or inaccuracies that may appear in this manual Victor Hasselblad AB amp Hasselblad A S assume no responsibility or liability for loss or damage incurred during or as a result of using Hasselblad products Copyright 2011 Victor Hasselblad AB amp Hasselblad A S All rights reserved HASSELBLAD www hasselblad com Proshade V H 60 95 2011 v4
Download Pdf Manuals
Related Search