DT-2306 - micHealth
Contents
1. Digital Clinical thermometer MODEL DT2306 Instruction Manual Name of the parts Battery Cover Switch Button Board Thermometer body Metal warm head Product Digital Clinical Thermometer Temperature range 32 2 C 42 0 C Temperature precision 0 01 C Product Size 161x25 6x13 8mm Weight 17g exclude battery This product packaging labeling without containing natural Rubber Latex Battery Change 1 The user shall change the battery as soon as possible when nothing is displayed even when the ON OFF is pressed battery should be replaced a Shut power off b Push open battery cover 2 When changing the battery open the battery cover and take the old battery out 3 Insert dry battery in the thermometer with the positive pole face upward and close the lid Caution Do not throw the old batteries into fire which may result in an accident or a Malfunction Change display unit When turning off the thermometer press the button for 3 seconds Display unit will be changed For example from C to F Repeat process to change F to C Use Direction 1 Press switch button when heard the beeps and shows 88 88 5 on LCD the thermometer ready to take a measurement The last temperature in the previous fixed measurement will appear 2 Read measured reading on the LCD 3 Press and hold switch button for about 4 seconds to shut off the thermometer The thermometer will shut off automatically if left idle for more th2. an 10 minute Oral Temperature Taking Slide the metal head of the thermometer under one side of the tongue well into the back of the mouth Close the mouth and when hearing 4 second alarm beeping removing the thermometer from your mouth and oral temperature is done Axillary Temperature Taking Dry your axillary with a towel put and press the metal head of the thermometer against the axillary from bottom up and hold your arm down tightly at your side Transfer to APP 3V X2 Choosing User s Channel Pressing 5 Sec to flashing with cellphone D mn End and take out The device comply with IEC60601 1 IEC60601 1 2 and ASTM EIll2 Standard Maintenance and Cleaning 1 The thermometer should be cleaned by the user in every measurement Detail cleaning procedure are described in the user s manual The cleaning processed will not influence the effectiveness 2 The Device must be operated at room temperature from 16 0 C to40 0 C This specification is defined in the manual If the device is operated outside the range there will be an error message shown on the LCD display and no measurement is allowed The device is compliant with IEC60601 1 2 EMC requirement 3 The device is intended for re use The steps of cleaning before reuse will be set out in the instructions for use 4 The expired battery must be disposed following the manual 5 Probe m
3. ight cause cross infection Clean probe and plastic portion after or before each use should be set out in the user s manual to avoid the possibility of cross infection 6 Specified the storage temperature and humidity condition of the digital thermometer in the instruction for use 7 The cleaning of the thermometer before and after use can be done with cold water in metal warm head part Using a piece of cotton wool or cloth that has been soaked in alcohol or dip the thermometer in a cleaning solution Limited Warranty Subject to normal use this thermometer is five years guaranteed against function and accuracy on the part of the manufacturer from the date of purchase Damage to the thermometer caused by improper treatment is not covered by the warranty Attention 1 Avoid dropping or twisting the thermometer body on purpose 2 Avoid putting it in boiled water 3 Keep away from the chemical solvent sunlight or high temperature THIS PRODUCT IS NOT FOR CONTRACEPTIVE USE Agent DUTECK Industrial Co Ltd 3F 2 No 26 Ln 513 Ruiguang Rd Neihu Dist Taipei City 114 Taiwan R O C Email dutech duteck com TEL 886 2 87975035 FAX 886 2 26589280
Download Pdf Manuals
Related Search