24240558301-A SP16G-A CD
Contents
1. 2 4 LED Indicator Status Explanation LED Indicator Color Power off battery charging Power off battery full LED light off charged Power on battery charging Power on battery full Green charged Standby Standby and Green screen off Recording Recording and screen off Beles 16 2 5 Powering the Device On Off 2 5 1 Auto Power On Off Once the vehicle engine is started the device automatically turns on lf the Automatic Record function is enabled the recording will automatically start right after the device turns on Please refer to Set Automatic Record 2 6 1 2 5 2 Manual Power On Off and Reset 2 5 2 1 Manual Power On Push the power switch and make sure that the power switch locks on the memory card slot 2 5 2 2 Power Off Push the power switch and make sure that the memory slot is released and the device starts power off sequence Do not power on the device when it is in the power off sequence or the recorded file may become corrupt 2 5 2 3 Reset the device In case the device fails to function normally due to unknown causes push the power switch and verify the memory card is in the removable state wait for 7 seconds and push the power switch again to restart the device 17 2 6 Initial Settings Before using the device we recommend you to enable the Automatic Record function and set up the correct Date and Time 2 6 1 Set Automatic Record Default setting of Automatic Record2. D30 720P 30fps resolution HD60 720P 60fps Set the exposure 42 0 20 compensation Setting for enabling ee Automatic Record after On Off ee device power on Save respective video files in a length of the 3 min 5 min selected duration Setting for activating audio in the video On Off Setting for the indication of date and time stamp mines tarp on the picture or video ou recorded Record Video Duration Note The all Driving Safety functions such as LDWS FCWS Front Vehicle Go Headlight warning Speed Cam Alert Speed Limit Alert Driver Fatigue Alert Collision Detection and ACC DEC Alert will be disabled if the product doesn t connect with the external power supply 5 Installing the Software 1 Place the attached CD ROM into the CD player 2 If the CD does not execute automatically please use Windows File Manager to execute the Install_ CD exe file in the CD The following screen will be shown up QuickTime PDF Reader User Manual SuperCar Exit 3 Press the Menu item to start the installation process according to the instructions on screen 41 6 SuperCar File Path 0 Duration 1 To display the route on Google Maps please make sure the internet is connected before starting the video playback 2 Video files MOV TS and GPS G Sensor files NMEA must be stored in the same folder before starting the playback 3 The SuperCar software is only appli
3. message will be shown immediately on the lower left corner of the screen and the recorded file will be protected 2 Touch ER again to halt the recording Note 1 If the Collision Detection function is enabled and a collision is detected the device will automatically trigger the emergency recording Please refer to Collision Detection 4 2 The emergency recording file is created as a new file which will be protected to avoid being overwritten by normal cycling recording 8G or above memory card can save up to 8 emergency video files The alert message of Emergency files are full will pop up on the screen when the emergency recording files are full and the oldest emergency file will be automatically deleted when a new emergency recording file is created 3 1 7 The Recording Screen Icon 2014 0101 Indicates the current recording date Ja Add speed point Touch to add a speed cam point Touch to enter the main menu While recording touch Ei to take a photo Recording Indicates video current Satellite The icon appears on the positioning screen when satellite positioning icon of the device is ready Batter Indicates the remaining y battery power 27 4 GRID Touch fe to enter the 4 GRID FUNCTION FUNCTION CHART in the LCD CHART inthe LCD screen Please refer to 4 GRID screen FUNCTION CHART in the LCD screen 3 1 9 Remind the user to reset the Date Time before start to use
4. 19 2 7 Application The camera allows you to connect to the mobile devices via the App When using for the first time install the Life Cam App for your mobile device 2 1 Application installation LIFE 1 Search from Google Play or App Store for Life Cam Wiis application 2 Install the App APP Layout and Features may be changed subject to different software versions Please refer to Google Play or APP Store for update 2 2 Wi Fi connecting 1 Touch to enter Main Menu 2 Touch iP to switch over to em Main Menu 3 Touch Be to select for entering Wi Fi function menu wait for screen to display device ID and Wi Fi password lt to LCD setting System Fo y Note The Wi Fi content mentioned by the Instruction Manual is the function of S272W but it is not available for E272S Device ID Wi Fi password 20 4 Using Wi Fi function of a mobile device search for device ID from the list and select and enter Wi Fi Password For iOS Android Users Using the mobile device Settings Wi Fi Select device ID no S272WXXXXXX Enter the password Connecting LIFE 5 Execute the Life Cam ESI App LIFE 6 Todisconnect Wi Fi link just exit Life Cam E28 Application Note 1 Make sure the Wi Fi function of the equipment is activated and the mobile device is receiving Wi Fi signal before executing the Life Cam App or the App will be exited 2 The mobile d
5. Polaroid Polaroid FHD Driving Recorder E272S S272W User Manual Questions m Need some help l LAAEN www polaroidcarcam com This manual will help you a i enjoy your new product Contents Abot this GUAE icenen berets oie E a 4 FOG Stale men Gastegsteec anes at E 4 Prohibition Of co location cccccseeeeeeeeeesseeeeeeeeeeseeeeeeeeeeaas 4 IMPOMAAU Nole enaren a e T a 5 WEBE NOUC Cries eciscscteseivgercisse sa siesveuesnecestierearieeduas ESERE 5 GE Regulatory NOC icccdcsccccerndecans panaedncnsnauten ES 5 Banery WAM aiccate ii plese a tetsu ciueur tetas 6 Notes on Installation ccccccsssssseeeeessesseeeeeeeseesseeeeeseseeees 6 CUNO M see a ea ee Aa a Oa 7 WATFOGUGUION ma aeee A E A e E EE N E EE TY 10 Wal yFealUrGS nensem a a ceecea ahaa aeeee 10 1 2 Package Contents inion Gas 10 1 3 Product OVErVieW ccccccssessceeeceseesseeeeeseeneeseeeess 11 Getting Started siten eaa Ne A 12 2 1 Inserting the Memory Card 12 2 2 Installing in Vehicles nnnnenennaoeeeeeen nenene 13 2 2 1 Mount to Windshield cccccssseeeeeeeeeeeees 13 2 2 2 Adjust the device PoOSition ssessseee 14 2 3 Connecting to POWETL ccccccccccesessesesssssseesseeeeees 15 24 LED IMGIGALOF senna 16 2 5 Powering the Device On Off 17 2 5 1 Auto Power On Off cccccsseeseeeeeeeeeeeeeeeeeees 17 2 5 2 Manual Power On Off and Reset 17 2 5 2 1 Ma
6. Electronic Equipment and or Battery by users in private households in the European Union This symbol on the product or on the packaging indicates that this can not be disposed of as a household waste You must dispose of your waste equipment and or battery by handling it over to the applicable take back scheme for the recycling of electrical and electronic equipment and or battery For more gu information about recycling of this equipment and or battery please contact your city office the shop where you purchased the equipment or your household waste disposal service The recycling of materials will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and environment CE Regulatory Notice Herewith confirm to comply with the requirements set out in the Council Directives on the Approximation of the Laws of the Member States relating Electromagnetic Compatibility of Radio and Telecom device 1995 5 EC the Low Voltage Directive 2006 95 EC the Restriction of The Use of Certain Hazardous Substances in Electrical And Electronic Equipment Directive 2002 95 EC Turkish EEE Directive EU Health Protection This equipment should be installed and operated with minimum distance 20cm between the radiator amp your body This product will meet the Basic Restriction limits of 1999 519 EC Battery warning gt SA RSA Always charge using the provid
7. sist hisiscic alae a ale 34 4 Adjusting the SettingS cccccccseseeeeeeeeeseeeeeeeeeeeeeeeees 35 4 1 Usmate MON sarnane acct csevatens 35 5 6 4 2 Menu Items Installing the Software s sseseseeeeeeeeeeeeeees SuperCar Specifications About this Guide The content in this document is for information purpose and is subject to change without prior notice We made every effort to ensure that this User Guide is accurate and complete However no liability is assumed for any errors and omissions that may have occurred The manufacturer reserves the right to change the technical specifications without prior notice FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measur
8. the device Please refer to Set the Date Time 2 6 2 Reset of date time Prompt Touch EI to start recording touch again to halt the recording Recording During video recording touch Emergency A to enter emergency Recording recording mode Please refer to Emergency Recording 3 1 6 3 1 8 Taking Snapshot You can also use this device to take snapshots of the current scene 1 Press A in recording mode to take a snapshot 2 A snapshot is taken when this icon appears at center of screen 28 3 1 9 4GRID FUNCTION CHART in the LCD screen Please touch when you are recording then you can see the 4 GRID FUNCTION CHART in the LCD screen Touch any point of the screen to return to Record Screen Driving Speed Speed Cam Ale Note Driving Speed Driving Direction and Speed Cam Alert are only applicable when satellite positioning of the device is ready otherwise they will be displayed in gray scale only Satellite positioning function is dependent on the model purchased 29 3 2 Playing Videos and Viewing Pictures 3 2 1 Playing Videos and Emergency Recording Playback video record files as follows 1 Touch to enter main menu at 2 Touch a to switch over to File Position menu 3 Touch to enter Video Emergency function menu File Position t File Positi BA ile Position lt AN o ps T Emergency Add speed point 4 Touch to browse for required v
9. the recording will continue when the engine is switched off If this happens please manually turn off the cigarette lighter or remove the car adapter from the cigarette lighter 3 1 2 LDWS Lane Departure Warning Systems When LDWS is enabled after satellite positioning device will give a voice alert and display an alarm screen if vehicle speed reaches or exceeds 50 km h 31 mile h and the vehicle deviates from the original lane To set the LDWS Lane Departure Warning Systems do the following aes 1 Touch E to enter Main Menu 2 Touch E to switchover to Driving Safety Main Menu 3 Touch lt f gt to select 7 for entering LDWS function menu then touch again to enable the function on 22 4 Touch to return to record screen 5 After enabling LDWS screen displays LDWS cross line please adjust the equipment to align the skyline with the horizontal line and make sure the vertical line in the middle of road Vanishing Point Horizon 6 when satellite positioning is in ready state device will give a voice alert and an alarm screen if vehicle speed reaches or exceeds 50 km h 31 mile h and the vehicle deviates from the original lane ab Note LDWS is only applicable when satellite positioning is in ready state Make sure satellite positioning of your device is ready if you want to activate this function Satellite positioning function is dependent on the model purchased When e
10. a click sound is heard 2 With the suction cup laying flat position the suction cup on the windshield 3 Hold the base firmly on the windshield and press down the clamp to mount the car holder to the windshield Make sure the base is securely locked in place 13 2 2 2 Adjust the device position 1 2 3 14 Loose the knob to swivel the device vertically Loose the knob to swivel the device horizontally up to 360 Knob Then tighten the knob to make sure the device is securely locked in place 2 3 Connecting to Power Use only the attached power connector for activating the device and charging the built in battery 1 Connect one end of power connector to USB Power connector port on the device 2 Plug the other end of the car adapter to the cigarette lighter socket of your vehicle Once the vehicle engine is started the device automatically turns on Note This product shall be installed near the back mirror at the center of windshield if possible for optimal viewing 15 Battery Status Indicator icon Description D fomo E mro a Battery is charging Connect the car adapter to charge the battery battery is full charged Note Please take note if the environment temperature reaches 45 C or above the car adapter still can supply power to device but it will not charge the Lithium ion battery This is the characteristic of Lithium ion and is not a malfunction
11. cable to a Windows operating system 42 7 Specifications ee Deseription OO 1 2 7 CMOS sensor 1920 H x 1080 V Support Micro SDHC Class 6 max up to 32GB 2 7 LCD color TFT touch screen a Wide Angle Fixed Focus lens F2 0 f 3 4mm GPS GLONASS Satellite Positioning feature varies Satellite System depending on the model E 802 11 b g n The wireless network feature varies Wi Fi depending on the model Resolution FHD 1080P 30fps HD30 720P 30fps BAN HD60 720P 60fps Movie Clip Format MOV Still image Resolution 2M 1920 x 1080 Snapshot Format JPEG Electronic shutter enuke Auto 1 2 1 2000 sec S Axis G Force sensor 43 ee Battery Built in 470mAh Li polymer rechargeable Operating 0 Temperature 50 C Operating Humidity Storage 20 80 C Temperature 80x30 3x 51 2 mm Weight Approx 82g without memory card Built in IEEE 802 11n Wi Fi module WN7911B WM Frequency range 2412 2462MHz 20 70 RH Channel List Chi Ch11 Contains FCC ID 2ACFIWM7911B 44 Copyright 2014 All rights reserved All other marks products or company names mentioned in this guide are trademarks of their respective companies lt Polaroid If you still have questions call our help line 400 8401 030 Pi queson h l or visit us at eed some help visit us at This manual will help you www polaroidcarcam com m enjoy your new product
12. e the video 33 3 2 4 Deleting Files To delete file s do the following 1 Touch to enter Main Menu 2 Touch to switch over to File Position main menu 3 Touch to enter Video Picture Emergency menu 4 Touch to browse for required video or picture file touch selected preview image to enter Video Picture Playback Mode I IS 5 Touch EJ to enter File Deletion menu select to delete one file or all files touch OFX to confirm or cancel the selection t File Deletion L9 Delete this file RA PA elete this file lt AC EEO x gt Delete One Delete All Confirm Cancel tem Description Delete One Delete the current file Delete All Delete all files 6 Touch repetitively to return to Record Screen Note Deleted files cannot be recovered Ensure the files have backup before deletion 34 4 Adjusting the Settings 4 1 Using the Menu You can customize the general settings via the on screen display OSD menus File Position Picture Set Timezone Le Record 1080P lt 30fps Resolution 1 Touch ES in the record mode will stop the record and enter into Main Menu 2 Touch Oo Rs fae CR to switch over main menus 3 Touch to browse for function items in the respective main menu touch a function icon to enter setting screen 4 On completion of setting a required function item device will return automatically to the main menu of the selected function 5 To
13. ed system Improper handling of the battery may result in explosion Never dismantle or pierce the battery or allow the battery to short circuit Keep the battery out of reach of children Batteries may explode if exposed to naked fire Never dispose of batteries in a fire Disposed of used batteries observing local regulations Never replace the battery on your own have the dealer do it for you Notes on Installation l 2 This product shall be installed near the rear view mirror at the center of windshield if possible for optimal viewing Make sure that the lens is within the wiping range of the windscreen wiper to ensure a clear view even when it rains Do not touch the lens with your fingers Finger grease may be left on the lens and will result in unclear videos or snapshots Clean the lens on a regular basis Do not install the device on a tinted window Doing so may damage the tint film Make sure that the installation position is not hindered by the tinted window To use the products of the attached power charger only please do not use other brand power charger in order to avoid equipment burn or cause the battery explosion Caution Due to local laws and vehicles safety considerations do not operate the device while driving Set up time and date accurately before you use this device Please use SuperCar software in condition that Google Map is function normally The firmware function in the device
14. eed limit Device will issue of A B an alert sound when vehicle speed exceeds 50 km h 200 km h the setting value 38 Main Function ist Description Available Option Main Function List Description Available Option List Available Option Available Option Driver Fatigue Alert Motion Detection Collision Detection ACC DEC Alert When Driver Fatigue Alert is enabled a voice alert and a warning screen will be activated 1 hour after the device is powered on with a repetition every subsequent 30 minutes If Motion Detection is activated the device will automatically trigger recording when the device detects any motion in front When the battery is fully charged and is in good condition Motion Detection can record continuously for about 30 minutes The Device will automatically trigger emergency recording when tremor of a collision is detected If Speed Accelerate Decelerate Alert is activated after satellite positioning device will issue a voice alert and display an alarm screen when vehicle speeds up above 70 km h 43 5 mile n and accelerates 30 km h 18 6 mile h in 5 seconds or speeds up above 50 km h 31 mile h and decelerates 20 km h 12 4 mile h in N O seconds On Off On Off High Sensitivity Normal Sensitivity Low Sensitivity Off On Off aw Function List Available Option l l FHD 1080P 30fps Resolution Setting of video
15. es e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment Contains FCC ID 2ACFIWM7911B Prohibition of co location This device and its antenna s must not be co located or operated in conjunction with any other antenna or transmitter 4 Important note Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment End users must follow the specific operating instructions for satisfying RF exposure compliance This equipment should be installed and operated with minimum distance 20cm between the radiator amp your body To maintain compliance with FCC exposure compliance requirements please follow the operating instructions as documented in this manual WEEE Notice Disposal of Waste Electrical and
16. evice shall be within a maximum of a 10m distance from the equipment without any buildings in between 3 When the Wi Fi function of the equipment is activated for 3 minutes without connecting with your mobile device or the connection is disconnected the equipment will automatically stop the Wi Fi function and you will need to re activate the Wi Fi function 4 We suggest that you should set the correct date and time for your mobile device before using the equipment so that the recorded video will be consistent with the date and time settings of the mobile device 5 When linking up with a mobile device touch control of device screen is no longer effective Perform operations via the Life Cam Application For operating the device again you need to exit the Life Cam Application first To operate the device please quit the Life Cam program and restart 6 The language of the Life Cam App will be consistent with that of your mobile device it shall be the default language if it is not the built in one 21 3 Using the Car Recorder 3 1 Recording Videos 3 1 1 Record videos while driving When the vehicle engine starts up and the Automatic Record function is enabled the device automatically turns on and starts recording The touch panel function is not ready yet within 2 seconds upon the Auto Recording start M will automatically stop when the engine is switched off or touch to stop recording manually Note On some cars
17. ge Contents The package contains the following items In case there is any missing or damaged item contact your dealer immediately 10 Car Recorder Bracket 1 3 Product Overview Front View Top and Bottom Views Side Left and Right Views Rear View 1 Bracket Socket Memory Card Slot USB Power Connector 1 GPS Antenna LCD Touch Panel I 2 Getting Started 2 1 Inserting the Memory Card Insert memory card with the gold section facing upward and the screen of the device facing upward too as illustrated Push the memory card in until a click sound is heard indicating the card is in position To remove the memory card Push to eject the memory card out of the slot Note Do not remove or insert the memory card when the device is turned on This may damage the memory card Please use a Class 6 or higher rating Micro SD card max up to 32GB Please format the micro SD cards before the initial use When removing the memory card be careful that the card may spring out and get lost The memory slot has this spring out feature for easy removal of the card 12 2 2 Installing in Vehicles 2 2 1 Mount to Windshield 1 Push the bracket into bracket slot on top of device until
18. he device and the pacemaker and never put this device in a chest pocket In case of any doubt of interference switch off the device immediately e Medical Device If you use a personal medical device consult the device manufacturer or your physician to confirm if your device is sufficiently shielded from the RF transmission of this device e Medical Facilities Hospitals and medical institutes may use facilities that are sensitive to an external RF energy Observe such instructions when the medical care personnel or any posted sign requests you to switch off any device that may interfere the radio frequency e Explosion sites or any location with a posted sign In order to prevent interfering with an explosion activity observe all the signage and instructions in the Explosion Area or in a zone with a Switch Off 2 way Radios sign by switching off devices that may interfere with the radio frequency Before you start using the system it is assumed that you agree to the above statement 1 Introduction Thank you for purchasing this advanced Car Recorder This device is specifically designed for real time video and audio recording when driving 1 1 Features Full HD recording videos 1920x1080 30fps or 1280x720 60fps 2 7 LCD color touch screen Wide angle lens Multifunction traffic safety reminder Automatic Emergency recording for collision detection Support SDHC Level 6 and above Support up to 32GB 1 2 Packa
19. ideo file touch selected preview of video to enter Playback Mode 20140101_000001 JPG 5 Touch repetitively to return to Record Screen 30 3 2 2 Viewing Pictures View pictures as follows 1 Touch to enter Main Menu 4i 2 Touch to switch over to File Position main menu 3 Touch to enter Picture function menu File Position 4 Touch to browse for required picture files touch selected preview of picture to enter Picture Playback Mode 5 Touch repetitively to return Record Screen 31 3 2 3 The Playback Screen Video Playback Screen 201401014_ 00007 MOV Current Duration Video Duration 00 00 01 00 00 10 Rewind Previous File Picture Playback Screen 1 01_o000 0RR Ss j Indicates name of current video or picture file Indicates time code and duration of current video file Touch El to enter File Deletion menu Touch D when video or picture is not in playback will switch over to the previous file Touch in video playback mode will reverse the playback Touch to return to preview screen of video or picture Touch screen repetitively to return to record No icon tem Desoription e Touch gt when video or picture is not in playback will Fast i l switch over to the next file forward Next File Touch gt gt in video playback mode will enable fast forward playing of video 7 oh Playback Touch oo to play or pause Paus
20. is Enabled The device will automatically start recording when powered on In case Automatic Record is disabled enable it by the following steps 1 Touch El to enter Main Menu 2 Touch ER to switchover to Record Main Menu 3 Touch Be to select for entering Automatic Record Ly Record AUTO function menu touch again to select ON Automatic Record Video Duration Automatic Record 4 Touch to return to Record screen 18 2 6 2 Set the Date Time To set the correct date and time do the following 1 Touch to enter Main Menu 2 In En System main menu touch Ka to select hana for Set Timezone menu touch Set Timezone to set the current time zone then touch again to UTC 00 00 complete setting AN Vv System JAN lt I gt O select value touch to Date Time Set Timezone select previous or next_ field confirm by touching to Date Time complete setting JAN 3 Select bkQ to enter Date Time menu Touch to Note 1 If Time Sync is on device clock will be calibrated via satellite clock signal based on Set Timezone Please refer to Time Sync 4 2 2 If satellite positioning is not successful device clock will run based on user defined time 3 Please be aware that touching E during the recording process will stop the recording process and enter into main menu Please make sure the recording can be stopped before operating menu selections
21. is for reference only please follow the actual road condition The results of GPS positioning are only for reference and should not affect the actual driving situation The system also cannot ensure the positioning accuracy GPS positioning accuracy may differ depending on weather and location such as high buildings tunnels undergrounds or forests GPS satellite signals cannot pass through solid materials except glass Tinted window will also affect the performance of the GPS satellite reception GPS reception performance on each device may differ The system cannot determine the accuracy of the positioning results from different devices The values displayed in this system such as speed position and the distance warning to the speed camera set points may be inaccurate due to the influence of surrounding environment They are for your reference only This device requires the installation of the GPS module and vehicle connector in order to use the satellite status Time Sync speed detection photo prompt user defined speed detection spot management user defined speed limit prompt lane deviation detection driver fatigue alert etc The system is used only for non commercial use within the maximum limits permitted by applicable law Our company does not accept any responsibility for any data loss during the operation Wi Fi Signals are unable to pass through the building The upper limit of signal transmission is 10m Wi Fi O
22. nable the LDWS FWDS and Front Vehicle Go please follow this self aligned approach in order to increase the accuracy The all Driving Safety functions such as LDWS FCWS Front Vehicle Go Headlight warning Speed Cam Alert Speed Limit Alert Driver Fatigue Alert Collision Detection and ACC DEC Alert will be disabled if the product doesn t connect with the external power supply 3 1 3 Driver Fatigue Alert When Driver Fatigue Alert is enabled a voice alert and a warning screen will be activated 1 hour after the device is powered on witha repetition at every subsequent 30 minutes To set the driver fatigue alert do the following 1 Touch Ea to enter main menu 2 Touch B to switch over to Driving Safety Main Menu 3 Touch Be to select entering Driver Fatigue Alert enZ menu touch a again to activate s on Driver Fatigue Alert m Driver Fatigue Alert 4 Touch to return to record screen Note for m Driving Safety oO gt Motion Detection The all Driving Safety functions such as LDWS FCWS Front Vehicle Go Headlight warning Speed Cam Alert Speed Limit Alert Driver Fatigue Alert Collision Detection and ACC DEC Alert will be disabled if the product doesn t connect with the external power supply 24 3 1 4 Motion Detection lf Motion Detection is activated turned off the car adapter when the device is powered on the system alert message Wait for 10 seconds to enter M
23. nual Power O1 ccccceccececeecececeececeeeeees 17 2 5 2 2 Power Olli eee eae eee 17 2 5 2 3 Reset the AeVICC ccccccccccccccccceceeeeeteeeeees 17 26 Initial Settings States denseteucte tense Sen catuat se deenentebotiiabes 18 2 6 1 Set Automatic ReCord ccccccccecceeeeeeeeees 18 2 6 2 Set the Date Time cccccceccccececeeeeeeeeees 19 2 Applications ena eden nals 20 2 7 1 Application installation cccececccce 20 2 7 2 Wi FiCONMGCINGwanvecudiracitaeneclives 20 3 Using the Car Recorde eseseeeeeeeeeseeeeeeeees 22 341 FRECONRGING VIACOS sccctsticccacecsatssraeceieccencctsenaiaaiessasantss 22 3 1 1 Record videos while driving ceeee 22 3 1 2 LDWS Lane Departure Warning Systems 22 3 13 Driver Fatigue Alert ccccceeeeeeeeeeeeeeees 24 3 1 4 Motion Detection cccccceeeeeeeeeeeeeeeeeees 25 3 1 5 Record all other types of videos 00 26 3 1 6 Emergency Recording cccceeeeeeeeeeeeeeees 26 3 1 7 The Recording Screen csssssesessssssseees 27 3 1 8 Taking Snapshot esa srci 28 3 1 9 4 GRID FUNCTION CHART in the LCD screen 29 3 2 Playing Videos and Viewing Pictures 00008 30 3 2 1 Playing Videos and Emergency Recording 30 3 2 2 Viewing Pictures ic drss cxverctievese tues sesbadiiyecadess pice 31 3 2 3 The Playback Screen scsssesesesstesseeeees 32 3 2 4 Deleting FilGS
24. otion Detection or touch the screen to power off will be displayed on the screen This means the system will enter Motion Detection automatically in 10 seconds when the device detects any motion in front of lens Video Record will be activated for a duration the same as the length setting To set the motion detection do the following 1 Touch to enter main menu 2 Touch EE to switch over to Driving Safety Main Menu 3 Touch lt gt to select for Fo DEG orri Motion Detection menu touch again to activate on Driver Fatigue Alert Motion Detection Motion Detection 4 Touch to return to record screen Note 1 When the battery is fully charged and is in good condition Motion Detection can record continuously for about 30 minutes 2 As the device is used the battery storage capacity will decrease gradually This is a normal phenomenon for the battery 3 1 5 Record all other types of videos 1 Touch ER to start recording 2 Touch EX again to halt the recording Note 1 It can be configured to save a video file for every 3 or 5 minutes of recording Please refer to Video Duration 4 2 2 The device saves the recording in the memory card If the memory card capacity is full the oldest file in the memory card is overwritten 3 1 6 Emergency Recording Start the Emergency Recording do the following 1 During video recording touch to enter emergency recording mode the Emergency
25. peration Channels List Ch1 Ch11 The product employs wireless data communication which may interfere or be interfered by a near by device Never use this device in the vicinity of a microwave oven or at places where there is radio interference Radio wave reception may be worsened in specific environments Please be advised that if another device is also using the same 2 4GHz band as this product the processing speed of both devices may slow down This product gets warm when in use this is normal Improper use or operation of the product may result in damage of the product or its accessories and void the warranty The radio frequency RF generated by this RF electronic device may cause adverse effects on the operation of other electronic devices and result in malfunctioning Wireless transmitters and circuitry may also interfere with other electronic devices Therefore do observe the following precautions e Aircraft Never use a radio transmitter when you are in an airplane Please switch off the Wi Fi function of the device e Vehicle The radio frequency transmitted by this device may affect the electronic system in a motorized vehicle Please consult the manufacturer or dealer of your vehicle on the possible effect e Pacemaker In order to prevent any potential interference to a pacemaker anyone who uses a pacemaker should be advised that when using this device a minimum distance of 15cm 6 inch should be kept between t
26. ser defined speed points from system When LDWS is enabled after satellite positioning device will give a voice alert and an alarm screen if On Off vehicle speed reaches Driving or exceeds 50 km h 31 Safety mile h and the vehicle deviates from the original lane When FCWS ss rs activated after satellite satelite saie Delete speed point F B record ile il Manually add speed File points after satellite Position oe positioning up to 200 P user defined speed points can be added Main Function List Description Available Option Main Function List Description Available Option _ List Available Option Available Option positioning device will issue a voice alert and an alarm image when vehicle speed is above 50 km h 31 mile h and the distance with the front vehicle is less than 20m When Front Vehicle Go is activated after satellite positioning device will issue a voice Front Vehicle alert and an alarm Go image when vehicle On Off speed is below 50 km h 12 4 mile h and the distance with the front vehicle is more than 20m When Headlight is activated device will issue a voice alert and Headlight an alarm screen Warning reminding that On oi insufficient brightness is sensed on the recording face When a vehicle approaches a speed Tom Speed Cam detection camera the On Off i Alert device will issue a voice alert and an alarm screen for reminding User defined sp
27. uch to return to Record Screen 35 4 2 Menu Items Refer to the below table for details of main menu and function list JAN To Set Timezone Set the time zone you UTC 12 00 are in UTC 12 00 When enabled device clock will be calibrated automatically based on Time Sync satellite clock of the set On Off time zone on completion of satellite positioning en Bee Enable Disable the Off Low Medium P beep High English EPX EKES Pycekn E ENG Language Set the on screen Espa ol Deutsch settings display menu language Fran ais Portugu s Italiano Japanese Arabic KM Distance Unit Select the unit for KM MILE distance display Set LCD off time Device screen will be off after a set time if no Operation is detected during the standby or Ca LCD setting record mode Touch any point of the touch screen will switch it on Recording is not affected when screen is off Wi Fi Set Wi Fi linkage of a mobile device On Off After 30 sec Off After 3 min 36 y Satellite Select satellite system System of the GES GLONASS Format the memory Recorder card ea in the g F equipment All the files Yes No ormat in the card will be erased Default Resume the equipment Setting to its default setting D Firmware Indicates the current Version Firmware Video Play Delete a video file e delete a picture Emergency Play delete Delete all the u
Download Pdf Manuals
Related Search