Home

User Manual - Vandenborre

Contents

1. 2011 65 EU ROHS Compliance with EMF TP Vision Europe B V manufactures and sells many product s targeted at w consumers which like any electr apparatus in general have the ability to emit and receive electr fagnetic signals One of Philips leading Business Principles is tog all necessary health and safety measures for our products to ly with all applicable legal requirements and to stay well gthin the Electro Magnetic Field EMF standards applicable at the me of producing the products Philips is committed to devdlgp produce and market products that cause no adverse h effects TP Vision confirms that as long as its products are handled properly for their intended use they are safe to use Q according to scientific evidence available today Philips plays an active role in the development of international EMF and safety standards enabling Philips to anticipate further developments in standardisation for early integration in its products 4 Q 17 2 Copyrights and licenses HDMI n gu HDMI The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries Dolby Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories MHEG software The copyright in MHEG software the Software com
2. DVB T or DVB C reception If both DVB T and DVB C reception is available in your country and if this TV is ready to receive DVB T and DVB C for your country you have selected one or the other during the channel installation If you want to change the DVB setting to start a new channel installation 1 Press and select Setup and press OK 2 Select Channel settings and press OK 3 Select Channel installation gt Antenna connection gt Antenna DVB T or Cable DVB C and press OK 4 Select the DVB setting you want 5 Press repeatedly if necessary to close the menu DVB C channel installation For ease of use all DVB C settings are set to automatic If your DVB C provider gave you specific DVB C values the network ID or network frequency enter these values when the TV asks for them during installation It might be necessary to adjust the scanning full or quick scan or enter a specific symbol rate in the Settings menu while installing To set a Symbol rate first set the Symbol rate to 21 Manual A amp Channel number conflicts In some countries different TV channels fe dcasters might have the same channel number While installiriggthe TV shows the list with channel number conflicts You need t select which TV channel you want to install on a channel numbe wath multiple TV channels Q7 A DVB T DVB C O If you can use a DVB T antenna input but also a DVB C input you
3. In addition to the Eco settings your TV also has environmentally friendly technology with regard to power consumption Inactive devices off Switch off connected EasyLink HDMI CEC Consumer Electronic Control compliant devices that are inactive Power management The advanced power management of this TV ensures the most efficient use of energy You can check how your personal TV settings the level of brightness in current onscreen pictures and the surrounding light conditions determine the relative power consumption To check the relative power consumption 1 Press and select Setup and press OK 2 Select Watch demos gt Active control Demo and press OK 3 Select a setting to check the corresponding values 37 hy az European energy label Gy The European Energy Label informs yo the energy efficiency class of this product The greener th energy efficiency class of this product is the lower the energy it On the label you can find the energy efficiency classythe average power consumption of this product in use and the a energy consumption for 1 year You can also find the x consumption values for this product on the Philips website G your country at www philips com TV Ri Q umes End of use Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components which can be recycled and reused When this cr
4. 72 E e Audio Out offset If you cannot set a delay on the Home Rogar System you can set a delay on the TV with Audio Out of d m 2 on os You can send the TV sound to a connected audio device a SA Home Theatre System or audio system Speakers Home Theatre System You can select where you want to hear the TV sound and how you want to control it If you select Off you permanently switch off the TV speakers If you select TV speakers the TV speakers are always on With an audio device connected with HDMI CEC you can use one of the EasyLink settings If you select EasyLink the TV sends the TV sound to the audio device The TV will switch off the TV speakers when the device is playing the sound f you select EasyLink autostart the TV will switch on the audio device send the TV sound to the device and switch off the TV speakers With EasyLink or EasyLink autostart selected you can still switch to TV speakers if necessary To set the TV speakers 1 Press and select Setup and press OK 2 Select TV settings gt Sound gt Sound output 3 Press right and select Off TV speakers EasyLink or EasyLink autostart 4 Press 2 repeatedly if necessary to close the menu To switch to speakers directly 1 While watching TV press t 2 Select Speakers and select TV or Amplifier audio system 3 Press gt repeatedly if necessary to close the menu
5. The TV will ask for the code to unlock the programme For some broadcasters operators the TV only locks programmes with a higher rating Child lock code You can set or change the Child lock code To set the lock code or to change the current code 1 Press and select Setup and press OK 2 Select Satellite settings gt Child lock gt Set code or Change code and press OK 3 If a code is set already enter the current Child lock code and then enter the new code twice The new code is set Forgotten your Child lock code If you forgot your code you can override the current code and enter a new code 1 Press and select Setup and press OK 2 Select Satellite settings gt Child lock gt Change code and press OK 3 Enter the overriding code 8888 4 Now enter a new Child lock code and enter it again to confirm 7 5 Satellite installation Installing satellites About installing satellites This TV has a built in satellite DVB S DVB S2 receiver Connect the cable from your satellite dish directly to the TV Use a coaxial cable fit for connecting a satellite antenna dish Make sure your satellite dish is perfectly aligned before you start the installation Up to 4 satellites You can install up to 4 satellites 4 LNBs on this TV Select the exact number of satellites you wish to install at the start of the installation This will speed up the installation Unicable You can use a
6. appel national Magyarorsz g 06 1 700 8151 Belf ldi h v s Nederland 0900 202 08 71 0 10 min Norge 229719 14 Osterreich 0820 40 11 33 0 145 Min Polska 22 397 15 04 Polaczenie lokalne Portugal 707 78 02 25 0 12 min M vel 0 30 min Non contractual images Images non contractuelles AuBervertragliche Bilder Specifications are subject to change without notice Philips and the Philips shield emblem are registered trademarks of Koninklijke Philips N V and are used under license from Koninklijke Philips Electronics N V All registered and unregistered trademarks are property of their respective owners 2014 O TP Vision Europe B V All rights reserved www philips com 52 KA 2 C 5 4 Romana b 031 6300042 Tarif local i e Poccua 2 8 800 22 00004 6ecn aruo 6 Ya Suisse Schweiz Svizzera SA 0848 000 291 0 081 CHF Min Q Cp6uja 011 321 6840 Lokalni poziv Slovakia 2 332 154 93 Vnutrostatny hovor Slovenija 1 888 83 12 Lokalni klic Suomi 09 88 62 50 40 Sverige 08 5792 9096 lokalsamtal usetnef nel Thailand 02 652 7650 Turkiye 444 8 445 United Kingdom 0844 338 04 88 5p min BT landline YkpaiHa 0 800 500 480 6e3KOWTOBHO www philips com support
7. provider To enter the value use the number keys Q Frequency scan Select the method of searching for channels You can select the faster Quick scan method and use the predefined settings used by most cable providers in your country If this results in having no channels installed or if some channels are missing you can select the extended Full scan method This method will take more time to search for and install channels Network ID With Frequency scan set to Quick you can enter here the network ID value received from your cable provider To enter the value use the number keys Digital channels If you know your cable provider is not offering digital channels you can skip searching for digital channels Select Off Analogue channels If you know your cable provider is not offering analogue channels you can skip searching for analogue channels Select Off Free Scrambled If you have a subscription and a CAM Conditional Access Module for pay TV services select Free scrambled If you did not subscribe to pay TV channels or services you can select Free channels only Manual installation Analogue TV channels can be manually installed channel by channel To install analogue channels manually 1 Press and select Setup and press OK 2 Select Channel settings gt Channel installation gt Analogue manual installation and press OK System To set up the TV system s
8. without TV stand Width 460 9 mm Height 299 mm Depth 53 3 mm Weight 2 62 kg with TV stand Width 460 9 mm Height 343 5 mm Depth 145 mm Weight 2 83 kg 22Pxx4109 22Pxx4209 without TV stand Width 509 7 mm Height 322 7 mm Depth 55 5 mm Weight 3 03 kg with TV stand Width 509 7 mm Height 367 2 mm Depth 145 mm Weight 3 24 kg 23Pxx4009 without TV stand Width 545 1 mm Height 344 mm Depth 55 5 mm Weight 3 05 kg with TV stand Width 545 1 mm Height 385 6 mm Depth 145 mm Weight 3 26 kg 24Pxx4109 without TV stand Width 550 4 mm Height 345 7 mm Depth 55 5 mm Weight t3 kg with TV stand Width 550 4 mm Height 386 8 mm Depth 145 mm Weight 3 51 kg 28Pxx4109 without TV stand Width 635 1 mm Height 396 7 mm Depth 80 8 mm Weight 4 33 kg with TV stand 39 2 Z7 Width 635 1 mm Height 438 rg Depth 190 mm Weight 4 89 kg a e K without TV stand z Width 725 7 mm Height 432 1 mm Depth 94h Weight 32Pxx41x9 5 06 kg E K with TV stand QG Width 725 7 mm Height 487 8 mm Depth 190 mm Waa 5 66 kg Or kom 39Pxx4109 without TV stand Width 878 3 mm Height 517 4 mm Depth 94 mm Weight 6 88 kg with TV stand Width 878 3 mm Height 571 4 mm Depth 250 mm Weight 8 9 kg 40Pxx41x9 without TV stand Width 919 mm Height 538 5 mm Depth 94 mm Weight 7 68 kg with TV stand Width
9. 919 mm Height 594 1 mm Depth 250 mm Weight 9 14 kg 42Pxx41x9 without TV stand Width 958 mm Height 563 mm Depth 94 mm Weight 7 8 kg with TV stand Width 958 mm Height 617 mm Depth 250 mm Weight 99 kg 47Pxx41x9 without TV stand Width 1099 mm Height 626 mm Depth 94 mm Weight 9 4 kg with TV stand Width 1099 mm Height 681 mm Depth 270 mm Weight 11 8 kg 50Pxx41x9 without TV stand Width 1125 mm Height 656 mm Depth 94 mm Weight 10 7 kg with TV stand Width 1125 mm Height 709 mm Depth 270 mm Weight 13 1 kg 13 7 Dimensions and weights 5219 24Pxx5219 without TV stand Width 552 3 mm Height 331 5 mm Depth 54 8 mm Weight 34 kg with TV stand Width 552 3 mm Height 338 8 mm Depth 121 5 mm Weight 3 66 kg 13 8 Dimensions and weights 5109 32Pxx5109 without TV stand Width 725 7 mm Height 429 2 mm Depth 55 4 mm Weight 4 97 kg with TV stand Width 725 7 mm Height 479 7 mm Depth 190 mm Weight 5 57 kg 40Pxx5109 without TV stand Width 918 2 mm Height 536 5 mm Depth 56 3 mm Weight 7 82 kg with TV stand Width 918 2 mm Height 592 1 mm Depth 249 8 mm Weight 9 9 kg 48Pxx5109 without TV stand Width 1082 mm Height 625 mm Depth 57 mm Weight 10 8 kg with TV stand Width 1082 mm Height 680 mm Depth 250 mm Weight 13 3 kg 55Pxx5109 without TV stand Width 1243 2
10. Display resolution P Pbooo9 1920x1080p Pbooo9 1366x768p Q Display resolutions Computer formats HDMI Resolution refresh rate 640 x 480 60 Hz 800 x 600 60 Hz 1024 x 768 60 Hz 1280 X 720 60 Hz 1280 X 768 60 Hz 1280 x 1024 60 Hz 1360 x 768 60 Hz 1600 x 900 60 Hz 1680 x 1050 60 Hz 1920 x 1080 60 Hz Computer formats VGA Resolution refresh rate 640 x 480 60 Hz 800 x 600 60 Hz 1024 x 768 60 Hz 1280 x 1024 60 Hz 1360 x 768 60 Hz 1600 x 900 60 Hz 1600 x 1200 60 Hz 1920 x 1080 60 Hz Video formats Resolution refresh rate 480i 60 Hz 480p 60 Hz 576i 50 Hz 576p 50 Hz 720p 50Hz 60 Hz 1080 50Hz 60 Hz 1080p 24Hz 25Hz 30Hz 50Hz 60 Hz For certain sets only 13 5 Power Product specifications are subject to change without notice For more specification details of this product see www philips com support Power Mains power AC 220 240V 10 Ambient temperature 5 C to 35 C Standby power consumption less than 0 3W Power saving features Eco mode Picture mute for radio Auto switch off Eco settings menu The power rating stated on the product typeplate is the power consumption for this product during normal household use IEC 62087 Ed 2 The maximum power rating stated between brackets is used for electrical safety IEC 60065 Ed 7 2 13 6 Dimensions and weights 4009 41x9 4209 20Pxx4109
11. TV If a CAM is inserted and subscription re paid connection methods can differ you can watch the roadcast The inserted CAM is exclusively for your TV 2 ys 7 34 ep Rz Set top box STB op Use 2 antenna cables to connect the antenna to the Set top box RA a digital receiver and the TV a ESI rg yn LOL j Next to the antenna connections add an HDMI cable to connect the Set top box to the TV Alternatively you can use a SCART cable if the Set top box has no HDMI connection Auto switch off Switch off this automatic timer if you only use the remote control of the Set top box Do this to prevent the TV from switching off automatically after a 4 hour period without a key press on the remote control of the TV To switch off the Switch off timer press ff and select Setup and press OK Select TV settings gt General settings gt Auto switch off and set the slider bar to Off 3 5 Satellite receiver Only for TVs with a built in satellite tuner Connect the dish antenna cable to the Satellite receiver Do C Next to the antenna connection add an HDMI cable to connect the device to the TV Alternatively you can use a SCART cable if the device has no HDMI connection Satellite Receiver EB e Auto switch off Switch off this automatic timer if you only use the remote control of the Set top box Do this to prevent the TV from switching off automatically after a 4 hour p
12. TV placement As part of the first installation this setting is set to either On a TV stand or Wall mounted If you have changed the placement of the TV since then adjust this setting accordingly for best sound reproduction 1 Press and select Setup and press OK 2 Select TV settings gt General settings gt TV placement and press OK 3 Select On a TV stand or Wall mounted and press OK 4 Press 2 repeatedly if necessary to close the menu 13 Specifications 13 1 Environmental Saving energy The Eco settings bundle the settings that help the environment While you are watching TV channels press to open Eco settings Active settings are marked with a amp You can mark or unmark each setting with the OK key Press again to close Eco settings Energy saving This Picture style sets the picture in the most ideal energy conscious setting Screen off If you only listen to music you can switch off the TV screen to save energy Select Screen off and press OK To switch the screen back on press any key on the remote control Auto switch off If you do not press a key on the remote control during a 4 hour period or if the TV receives no signal for 10 minutes the TV switches off automatically to save energy If you use the TV as a monitor or use a digital receiver to watch TV a Set top box STB and you do not use the remote control of the TV deactivate the automatic switch off
13. Unicable is typically used in apartment buildings If you use a Unicable system the TV will ask you to assign a user band number and corresponding frequency during the installation You can install 1 or 2 satellites with Unicable on this TV If you notice some missing channels after a Unicable installation another installation might have been done at the same moment on the Unicable system Do the installation again to install the missing channels m 22 User band number In a Unicable system each connected satellite receiver must be numbered e g 0 1 2 or 3 etc You can find the available user bands and their number on the Unicable switchbox User band is sometimes shortened as UB There are Unicable switchboxes that offer 4 or 8 user bands If you select Unicable in the settings the TV will ask you to assign the unique user band number for its built in satellite receiver A satellite receiver cannot have the same user band number as another satellite receiver in the Unicable system User band frequency Next to the unique user band number the built in satellite receiver needs the frequency of the selected user band number These frequencies are mostly shown next to the user band number on a Unicable switchbox Add a satellite You can add an additional satellite to your current satellite installation The installed satellites and their channels stay untouched However some satellite operators do not allo
14. Unicable system to connect the antenna dish to the TV Select if you are installing satellites for a Unicable system for 1 or for 2 satellites at the start of the installation Installing You can install your satellites during the initial TV setup The satellite installation follows the TV channel installation If you only watch satellite channels you can skip the TV channel installation You can always start a new satellite installation from the Setup menu To install satellite channels 1 Press and select Setup and press OK 2 Select Search for satellite and press OK 3 Select Install satellites and press OK 4 The TV shows the current installation setting If the current setting corresponds with the satellite installation you want you can start searching for satellites Select Search and press OK Go to step 5 If the current setting is not the setting you want select Settings and press OK Go to step 4b 4b In the Settings menu select the exact number of satellites you want to install Or if you use a Unicable setup select Unicable for 1 satellite or Unicable for 2 satellites according 25 w the number of satellites you wart install for Unicable Select the setting you want and press OK Q 4c If the exact number of satellites is Sbor you completed the Unicable settings select Search and press 5 The TV will search for satellites available on tHe alignment of your antenna dish Thi
15. and better graphics Text setup Text language Some digital TV broadcasters have several Text languages available To set your primary and secondary Text language 1 Press and select Setup and press OK 2 Select Channel settings gt Languages 3 Select Primary Teletext or Secondary Teletext 4 Select your preferred Text languages 5 Press gt repeatedly if necessary to close the menu Text 2 5 If available Text 2 5 offers more colours and better graphics Text 2 5 is activated as a standard factory setting To switch off Text 2 5 1 Press TEXT 2 While watching the teletext press OPTIONS 3 Select Text 2 5 gt Off 4 Press gt repeatedly if necessary to close the menu Subtitles and languages Subtitles Switch subtitles on To open the Subtitle menu press SUBTITLE You can set subtitles to Subtitles off Subtitles on or Automatic To show subtitles when the broadcasted programme is not in your language the language you set for the TV select Automatic Also this setting will show subtitles when you mute the sound with 9 For analogue channels subtitles must be made available in Text Subtitles for digital channels There is no need to set subtitles in Text for digital channels Digital channels can offer several subtitle languages for a programme You can set a preferred primary and secondary subtitle language If subtitles in one of these lan
16. can do a full new TV installation Y E ey 3 Press OK to confirm oy 4 Press 2 repeatedly if necessary ose the menu Channel list copy Ly uz Introduction i27 Channel list copy is intended for dealers and expert users MR some countries Channel list copy is only availble for copying a satellite channels SA With Channel list copy you can copy the channels installed on one TV onto another Philips TV of the same range With Channel list copy you avoid the time consuming channel search by uploading a predefined channel list on a TV Use a USB flash drive of minimum 1 GB Conditions Both TVs are from the same year range Both TVs have the same hardware type Check the hardware type on the TV type plate on the back of the TV Typically noted asQ LA Both TVs have compatible software versions Current version You can check the current version of the TV software with Current software info in f amp gt Setup gt Software settings If a child lock code is set you will need to enter this code before you can reinstall channels Reinstall channels To reinstall the channels only 1 Press and select Setup and press OK 2 Select Search for channels gt Re install Channels and press OK 3 Select the country where you install the TV 4 Select Antenna DVB T or Cable DVB C The channel search may take a few minutes Follow the instructions on Screen Full install
17. gt Format and edges gt Screen edges 3 Press right and adjust the value with A up or w down 4 Press 2 repeatedly if necessary to close the menu 12 6 Location If the TV is located in a shop you can set the TV to display an in store promotion banner The Picture style is set to Vivid automatically The automatic Auto switch off is switched off To set the TV to Shop location 1 Press and select Setup and press OK 2 Select TV settings gt General settings gt Location and press OK 3 Select Shop and press OK 4 Press 2 repeatedly if necessary to close the menu 12 7 Sound Sound style For easy sound adjustment you can select a preset setting with Sound style 1 While watching a TV channel press OPTIONS to open the Options menu 2 Select Picture and sound in the menu bar and select Sound style 3 Select a Sound style and press OK The different Sound styles are Personal Your personal choices made in Personalise picture and sound Original Factory standard Movie Ideal for watching movies News Ideal for speech Music Ideal for listening to music Game Ideal for gaming Adjust a Sound style You can adjust a Sound style 1 Select the style and press OK 2 Press and select Setup and press OK 3 Select TV settings navigate to the individual setting and adjust it 4 Press gt to close the menu to store your setting To
18. retum to the original Sound style values 1 Press and select Setup and press OK 2 Select TV settings gt Sound gt Restore style Sound settings Bass With Bass you can adjust the level of low tones in the sound To adjust the level 1 Press and select Setup and press OK 2 Select TV settings gt Sound gt Bass 3 Press right and adjust the value with A up or w down 4 Press 2 repeatedly if necessary to close the menu Treble With Treble you can adjust the level of high tones in the sound To adjust the level 1 Press and select Setup and press OK 35 2 L 2 Select TV settings gt Sound C beble 3 Press right and adjust the val A up or w down 4 Press gt repeatedly if necessary todos dese the menu Surround mode 4 Lb With Surround mode you can set the sound effect o speakers To set the surround mode 1 Press and select Setup and press OK 6 2 Select TV settings gt Sound gt Surround mode 3 Press right and select Stereo Incredible surround 4 Press 2 repeatedly if necessary to close the menu Headphones volume With Headphones volume you can set the volume of a connected headphones separately To adjust the volume 1 Press OPTIONS and select Picture and sound in the menu bar 2 Press right and select Headphones volume and press OK 3 Press A up or w down to adjust the volume 4 Pres
19. 2 Select the channel to mark as favourite and press OPTIONS 3 Select Add favourites and press OK The selected channel is marked with a w 4 To finish press gt The channels are added to the Favourites list 5 To remove a channel from the favourites list select the channel with a yir then press OPTIONS select Remove favourites and press OK Reorder You can reorder reposition channels in the Favourite channel list 1 In the channel list Favourites highlight the channel you want to reposition 2 Press OPTIONS 3 Select Reorder and press OK 4 Select the channel to reorder and press OK 5 Press the Navigation buttons to move the highlighted channel to another location and press OK 6 Once complete press OPTIONS 7 Select Exit reorder and press OK You can highlight another channel and do the same Add or remove favourites in other channel lists You can mark channels and radio stations as favourites from the All Radio and New channel list In these lists highlight a channel you want to add to the favourite list and press OPTIONS Select Add favourites and press OK The selected channel is marked with a yr To remove a channel from the favourites list select Remove favourites and press OK Rename channels You can rename channels in the channel list 1 Select the channel you want to rename in one of the channel lists 2 Press OPTIONS 3 Select Renam
20. 3 11 Connectivity 40 50 41x9 For PxKxxx9 TV Rear HDMI 1 ARC HDMI Audio Return Channel HDMI 2 HDMI 3 SERV U Service port TV ANTENNA 75 ohm coaxial IEC SCART RGB CVBS SCART adaptor AUDIO IN DVI Stereo 3 5mm mini jack DIGITAL AUDIO OUT SPDIF Headphones Stereo 3 5mm mini jack USB2 TV Side Cl Common Interface USB 1 Satellite For PxHxxx9 PxTxxx9 TV Rear HDMI 1 ARC HDMI Audio Return Channel HDMI 2 HDMI 3 Only for PFT41x9 models SERV U Service port TV ANTENNA 75 ohm coaxial IEC SCART RGB CVBS SCART adaptor AUDIO IN DVI Stereo 3 5mm mini jack 41 Y Le DIGITAL AUDIO OUT SPDIF Headphones Stereo 3 5mm mini Ea USB 2 Only for PFT41x9 models 4o TV Side 2 Cl Common Interface Ly USB 1 A d Ye 13 12 7 Connectivity 32 55 4309 5109 s 5209 For PxKxxx9 TV Rear HDMI 1 ARC HDMI Audio Return Channel HDMI 2 SERV U Service port TV ANTENNA 75 ohm coaxial IEC SCART RGB CVBS SCART adaptor AUDIO IN DVI Stereo 3 5mm mini jack DIGITAL AUDIO OUT SPDIF Headphones Stereo 3 5mm mini jack TV Side Cl Common Interface USB Satellite For PxHxxx9 PxTxxx9 TV Rear HDMI 1 ARC HDMI Audio Return Channel HDMI 2 SERV U Service port TV ANTENNA 75 ohm coaxial IEC SCART RGB CVBS SCART adaptor AUDIO IN DVI Stereo 3 5mm mini jack DIGITAL
21. AUDIO OUT SPDIF Headphones Stereo 3 5mm mini jack TV Side Cl Common Interface USB Satellite 13 13 Sound Output power RMS 10 THD 4W Mono Stereo Sound enhancement Incredible Surround Clear Sound 13 14 Multimedia Note Multimedia file names must not exceed 128 characters Supported multimedia connections USB 2 0 FAT FAT 32 NTFS only connect USB devices that consume 500 mA of power or less Supported image files JPEG jpg jpeg PNG p Supported MPEG Supported avi m Supported ngjpg audio files mp3 video files p4 mov mkv mpg mpeg subtitle format SRT mu Supported tiple language support audio video formats Video Decoder X264 H264 AVC encoder X264 1920x1080 30 fps MPEG Layer 3 192 KB 48 000 Hz Stereo Container Video Decoder Resolution Audio Decoder T MPEG2 1920x1000 Transport Stream H264 1910 x 1080 42 14 Software 14 1 Software update Update from USB It might be necessary to update the TV software You need a computer and a USB memory device to upload the software on the TV Use a USB memory device with 256MB free space Make sure that write protection is switched off 1 Start the update on TV To start the software update Press select Setup and press OK Select Update software gt USB and press OK 2 Identif
22. K Q 2 Select Search for satellite and press OK O 3 Select Remove satellite and press OK The current satellites SA are shown 4 Use the arrows keys to select the satellite you want to remove 5 Press OK to mark a satellite to remove Press OK again to unmark 6 Select Remove press OK and confirm The satellites are removed 7 Select Exit and press OK to close Remove satellite Update satellite channels Once a day at 6 AM the TV automatically updates the satellite channels A channel update looks for new channels and adds them to the channel list No longer available channels are removed and if a provider reorders its channel package the channel list of the TV will be updated The TV must be on standby to automatically update the satellite channels Alternatively you can do a channel update yourself at any moment New channels found with the channel update are marked with the letter N and collected in the channel list New New channels are also added in the All channel list New channels stay in the channel list New as long as you do not tune to them or mark them as a favourite Switch off the automatic channel update You can completely switch off the TV at night to avoid a channel update Alternatively you can switch off the automatic update in the setup menu 1 Press and select Setup and press OK 2 Select Satellite settings gt Channel installation gt Automatic channel update and select
23. Off Switch off the update for a specific satellite 1 Press and select Setup and press OK 2 Select Satellite settings gt Channel installation gt Automatic update option 3 With the arrow keys select the satellite you do not wish to update Press OK to unmark the satellite 4 Select Done and press OK to close the menu The TV will not update the channels from satellite you marked Start an update yourself 1 Press and select Setup and press OK 2 Select Search for satellite and press OK 3 Select Update channels and press OK 4 If you want to check which satellites are set for updating select Settings and press OK 5 With the arrow keys mark or unmark the satellites for updating Select Done and press OK 6 Select Update and press OK The update may take a few minutes 7 Select Finish and press OK Languages and audio Preferred languages and subtitles Satellite channels can hold different audio languages subtitle languages or Text languages You can set the TV to automatically switch to the language subtitle language or Text language you prefer if this language is available on the channel or Text pages To set the your preferred language 1 Press and select Setup and press OK 2 Select Satellite settings and press OK 3 Select Languages and press OK Select the setting you want 4 Press gt repeatedly if necessary to close the menu Au
24. Register your product and get support at 22 www philips com welcome ET User Manual DHILIDS O Z7 Q Contents amp 5 11 Froma USB ion 32 7h roma connection 1 Your new TV 3 2 14 EasyLink 3 12 Settings 34 L a sean 4 21 Tint 34 Uy etting up 2 2 Custom tint 34 R2 2 1 Read safety 4 2 3 Brightness 34 O 22 TV stand and wall mounting 4 2 4 Game or computer 34 s 23 Tipson placement 4 2 5 Formatand edges 34 6 24 Power cable 4 12 6 Location 34 e 25 Antenna cable 5 2 7 Sound 34 2 6 Satellite dish 5 13 Specifications 37 3 Connections 3 3 1 Environmental 37 3 1 Tips on connections 6 32 Reception for PXHxxx9 PxTxxx9 37 32 EasyLink HDMI CEC 7 333 Reception for PxKxxx9 38 33 Common interface CAM 8 34 Display 38 34 Set top box STB 8 35 Power 38 35 Satellite receiver 8 3 6 Dimensions and weights 4009 41x9 4209 39 36 Home heatre System HTS 9 37 Dimensions and weights 5219 39 37 Blu ray Disc player 10 3 8 Dimensions and weights 5109 40 38 DVD player 10 39 Connectivity 20 28 4009 4109 4209 5219 40 39 Game console 11 3 10 Connectivity 32 39 41x9 40 310 USB flash drive 11 3 11 Connectivity 40 50 41x9 41 311 Photo camera 11 3 12 Connectivity 32 55 4309 5109 5209 41 312 Camcorder 11 3 13 Sound 41 313 Computer 11 3 14 ultimedia 41 314 Headphones 12 14 Software 43 4 Switch on 13 4 Software update 43 41 Onor Standby 13 4 2 Software version 43 E Remotecontrol 14 4 3 Open source so
25. TS with the TV in standby press zii SOURCES on the TV remote control 30 2 3 EasyLink With EasyLink you can operate a connected device with the TV remote control EasyLink uses HDMI CEC to communicate with the connected devices Devices must support HDMI CEC and must be connected with an HDMI connection 10 Timers and clock 10 1 Sleep timer With the sleep timer you can set the TV to switch to standby automatically after a preset time To set the sleep timer 1 Press and select Setup and press OK 2 Select TV settings gt General settings gt Sleep timer With the slider bar you can set the time to up to 180 minutes in increments of 5 minutes If set to 0 minutes the sleep timer is switched off You can always switch off your TV earlier or reset the time during the countdown 3 Press gt repeatedly if necessary to close the menu 10 2 Clock To know what time it is press TV GUIDE to find the time in the TV guide In some countries digital broadcasts do not send UTC Coordinated Universal Time information The daylight saving change might be ignored and the TV might show an incorrect time To correct the TV clock 1 Press and select Setup and press OK 2 Select TV settings gt General settings gt Clock gt Auto clock mode and select Country dependent 3 Select Daylight saving and select the appropriate setting 10 3 Auto switch off If you do not press a ke
26. TV Only for TVs with a built in satellite tuner 5 ks e a 3 Connections 3 1 Tips on connections Connectivity guide Always connect a device to the TV with the highest quality connection available Also use good quality cables to ensure a good transfer of picture and sound If you need help to connect several devices to the TV you can visit the Philips TV connectivity guide The guide offers information on how to connect and which cables to use Go to www connectivityguide philips com Antenna If you have a Set top box a digital receiver or Recorder connect the antenna cables to run the antenna signal through the Set top box and or Recorder first before it enters the TV In this way the antenna and the Set top box can send possible additional channels to the Recorder to record Ep a Bens sa l E rg gU Erg Qum LJU JL J HDMI HDMI CEC An HDMI connection has the best picture and sound quality One HDMI cable combines video and audio signals Use an HDMI cable for High Definition HD or Full HD FHD TV signals For best signal quality transfer use a High speed HDMI cable and do not use an HDMI cable longer than 5 m EasyLink HDMI CEC KA If your devices are connected with Ba and have EasyLink you can operate them with the TV remote corpsol EasyLink HDMI CEC must be switched On on the TV and th amp connected device be E DVI to HDMI Use a DVI to HDMI adapter i
27. Using the TV guide What you need With the TV guide you can view a list of the current and scheduled TV programmes of your channels Depending on where the TV guide information data is coming from analogue and digital channels or only digital channels are shown Not all channels offer TV guide information The TV can collect TV guide information for the channels that are installed on the TV e g the channels you watch with Watch TV The TV cannot collect the TV guide information for channels viewed from a digital receiver Open the TV guide s TV GUIDE Press 2 TV GUIDE again to close The first time you open the TV guide the TV scans all TV channels for programme information This may take several minutes TV guide data is stored in the TV Tune to a programme Switch to a programme From the TV guide you can switch to a current programme To select a programme use the arrow keys to highlight the programme name Navigate to the right to view programmes scheduled later that day To switch to the programme channel select the programme and press OK View programme details To call up the details of the selected programme press D INFO Change day The TV guide can show scheduled programmes for the upcoming days maximum up to 8 days If the TV guide information comes from the broadcaster you can press 888 to view the schedule of one of the next days Press 888 to go back
28. V s weight Also read the safety precautions before positioning the TV TP Vision Europe B V bears no responsibility for improper mounting or any mounting that results in accident or injury 2 3 Tips on placement Position the TV where light does not shine directly on the screen Position the TV up to 15 cm away from the wall The ideal distance to watch TV is 3 times its diagonal screen size When seated your eyes should be level with the centre of the screen 24 Power cable Insert the power cable into the POWER connector on the back of the TV Make sure the power cable is securely inserted in the connector Make sure that the power plug in the wall socket is accessible at all times When you unplug the power cable always pull the plug never pull the cable TV For 22PFx4209 POWER 12 DC IN Although this TV has a very low standby power consumption unplug the power cable to save energy if you do not use the TV for a long period of time 2 5 Antenna cable Insert the antenna plug firmly into the ANTENNA socket at the back of the TV You can connect your own antenna or an antenna signal from an antenna distribution system Use an IEC Coax 75 Ohm RF antenna connector Use this antenna connection for DVB T and DVB C input signals E Q a 22 Co 2 Bu Satellite dish 4 O Attach the satellite F type connector to the seite connection SAT at the back of the
29. VI cable make sure that an additional audio cable is connected to AUDIO IN mini jack only if available EasyLink does not work Make sure that your HDMI devices are HDMI CEC compatible EasyLink features only work with devices that are HDMI CEC compatible No volume icon shown When a HDMI CEC audio device is connected this behaviour is normal Photos videos and music from a USB device do not show 45 w E Make sure that the USB mio is set to Mass Storage Class compliant as described in the Ka device s documentation Make sure that the USB storage device r with the TV Make sure that the audio and picture file formatijare supported by the TV amp Choppy playback of USB files e The transfer performance of the USB storage device may li the data transfer rate to the TV which causes poor playback SA Q 15 2 Register Register your TV and enjoy a range of benefits including full support including downloads privileged access to information about new products exclusive offers and discounts the chance to win prizes and even participate in special surveys about new releases Go to www philips com welcome 15 3 Help This TV offers help on screen Open Help 1 Press to open the Home menu 2 Select Help and press OK 15 4 Online help To solve any Philips TV related problem you can consult our online support You can select your language and enter your product
30. a satellite transponder You need to know the frequency and polarization of the transponder The TV will install all channels of that transponder If the transponder was installed before all its channels the former and the new ones are moved to the end of the channel list All You cannot use Manual installation if you need to change the number of satellites If this is needed you have to do a complete installation with Install satellites To install a transponder 1 Press and select Setup and press OK 2 Select Satellite settings gt Channel installation gt Manual installation and press OK 3 If you have more than 1 satellite installed select the satellite LNB for which you want to add channels 4 Set the Polarization you need If you set the Symbol rate mode to Manual you can enter the symbol rate in Symbol rate manually Enter the Frequency and start searching for the transponder 5 If a transponder is found select Store and press OK to store the new transponder on the selected LNB 6 Select Exit to leave the manual installation 7 6 Problems with satellites The TV cannot find the satellites want or the TV installs the same satellite twice Make sure that the correct number of satellites is set in Settings at the start of the installation You can set the TV to search for One Two or 3 4 satellites A dual head LNB cannot find a second satellite lf the TV finds one satellite b
31. age rating 4 Set the age and press OK 5 Press 2 repeatedly if necessary to close the menu 6 To switch off the parental age rating select None as age setting The TV will ask for the code to unlock the programme For some broadcasters operators the TV only locks programmes with a higher rating Set or change the lock code To set the lock code or to change the current code 5 KA 1 Press and select Setup and Tops OK 2 Select Channel settings gt Child ax Change code and press OK 3 If a code is set already enter the nc lock code and then enter the new code twice 2 be The new code is set FA To override and enter a new child lock code in case you fof it enter 8888 Forgotten your code Q Ca Picture format If black bars appear on top and bottom or on both sides of the picture you can adjust the picture format to a format that fills the screen To change the picture format 1 While watching a TV channel press Ei to open the Picture format menu 2 Select a format from the list and press OK The following format can be available according the picture on screen Auto Adjust the picture format according to the input source Super zoom Removes the black bars on the side of 4 3 broadcasts The picture is adjusted to fit the screen Movie expand 16 9 Scale 4 3 format to 16 9 Not recommended for HD or PC Wide screen Stretches the picture
32. allation is completed all satellite channels are put in the channel list You can view the list of all channels or filter the list down to show the favourite channels only or the radio stations only Or after a channel update you can find the newly added channels in the list of new channels From any list you can directly tune to a channel The list you select in the channel list determines the channels you tune to with the 83 and 85 keys You can only reorder channels in the list of favourite channels Select a list filter The list you select in the channel list determines the channels you tune to with the 325 and 225 keys To select a channel list 1 Press and select Satellite and press OK 2 Press LIST to open the channel list The list appears with the current channel selected 3 Navigate up to select All or a list filter Favourites Radio TV or New 23 A z Channel list options Gy e To view the channel list options on the Sdent channel 1 With the All channels list on screen select gpannel and press OPTIONS L 2 Select the option you want and press OK e Available options for satellite channels S Satellite on Filter the channel list to only show the channels of a specific Eo satellite or show the channels of all satellites G Free Scrambled Filter the channel list to only show the free to air channels only the scrambled
33. ame with the TV In case you lost this guide you can download the guide from www philips com Use the product type number of the TV to look for the Quick Start Guide to download Risk of electric shock or fire Never expose the TV to rain or water Never place liquid containers such as vases near the TV If liquids are spilt on or into the TV disconnect the TV from the power outlet immediately Contact Philips TV Consumer Care to have the TV checked before use Never expose the TV remote control or batteries to excessive heat Never place them near burning candles naked flames or other heat sources including direct sunlight Never insert objects into the ventilation slots or other openings on the TV Never place heavy objects on the power cord Avoid force coming onto power plugs Loose power plugs can cause arcing or fire Ensure that no strain is exerted on the power cord when you swivel the TV screen To disconnect the TV from the mains power the power plug of the TV must be disconnected When disconnecting the power always pull the power plug never the cord Ensure that you have full access to the power plug power cord and outlet socket at all times 47 2 2 s Risk of injury or damages t the TV Two people are required to lift and Sag that weighs more than 25 kg or 55 Ibs 2 If you mount the TV on a stand only use the supplied stand Secure the stand to the TV tight
34. amp SOURCES select a device conn to an HDMI connection and press OK o4 Once the device is selected the TV remote control can control the device However and OPTIONS keys and some other TV keys are not forwarded to the device If the key you need is not on the TV remote control you can select the key in the Options menu Press OPTIONS and select Controls in the menu bar On the screen select the device key you need and press OK Some very specific device keys might not be available in the Controls menu Note Only devices that support EasyLink Remote Control function will respond to the TV remote control EasyLink settings The TV comes with all EasyLink settings switched on You can switch off any EasyLink setting independently EasyLink To switch off EasyLink completely 1 Press and select Setup and press OK 2 Select TV settings gt General settings gt EasyLink 3 Select EasyLink 4 Select Off and press OK 5 Press gt repeatedly if necessary to close the menu EasyLink Remote Control If you want devices to communicate but you don t want to operate them with the TV remote control you can switch off EasyLink remote control separately You can control multiple HDMI CEC compliant devices with your TV remote control In the EasyLink settings menu select EasyLink Remote Control and select Off One touch play When you play an HDMI CEC compliant device the TV switches
35. ation To redo a full TV installation 1 Press and select Setup and press OK 2 Select TV settings gt General settings gt Reinstall TV and press OK The installation may take a few minutes Follow the instructions on screen Factory settings Factory settings sets the TV back to the original TV settings for picture and sound To switch back to the original Factory settings 1 Press and select Setup and press OK 2 Select TV settings gt General settings gt Factory settings and press OK 20 Copy channel list To copy a channel list 1 Switch on the TV which has its channels installed Plug in a USB memory device 2 Press and select Setup and press OK 3 Select TV settings gt General settings gt Copy channel list gt Copy to USB and press OK To copy the channel list from this TV you might be asked to enter the Child lock code you entered during the installation 4 When copying is done unplug the USB memory device Now you can upload the copied channel list onto another Philips TV Upload channel list Upload a copied channel list Depending on whether your TV is already installed or not you must use a different way to upload a channel list Toa TV that is not yet installed 1 Plug in the power plug to start the installation and select language and country You can skip Search for channels Finish the installation 2 Plug in the USB memory device that holds the channel li
36. ble QAM Analogue video playback NTSC SECAM PAL Digital video playback MPEG2 SD HD ISO IEC 13818 2 MPEG4 SD HD ISO IEC 14496 10 Digital audio playback ISO IEC 13818 3 Satellite aerial input 75 ohm F type Input frequency range 950 to 2150MHz Input level range 25 to 65 dBm DVB S S2 QPSK symbol rate 2 to 45M symbols SCPC and MCPC Supported satellites Astra 19 2 E Astra 23 5 E Astra 28 2 E Hotbird 13 0 E T rkSat 42 0 E Eutelsat 7 W Thor 1 W Astra HD support LNB DiSEqC 1 0 1 to 4 LNBs supported Polarity selection 14 18V Band selection 22kHz Tone burst mode LNB current 300mA max 13 4 Display Type Diagonal screen size 20Pxx4109 51 cm 20 inch 22Pxx4109 56 cm 22 inch 23Pxx4009 58 cm 23 inch 24Pxx4109 61 cm 24 inch 28Pxx4109 71 cm 28 inch 32Pxx41x9 81 cm 32 inch 39Pxx41x9 96 cm 39 inch 40Pxx41x9 102 cm 40 inch 42Pxx41x9 107 cm 42 inch 47Pxx41x9 120 cm 47 inch 50Pxx41x9 127 cm 50 inch 22Pxx4209 56 cm 22 inch 24Pxx5219 61 cm 24 inch 32Pxx43x9 81 cm 32 inch 40Pxx43x9 102 cm 40 inch 5O0Pxx43x9 127 cm 50 inch 32Pxx5109 81 cm 32 inch 40Pxx5109 102 cm 40 inch 38 2 4 48Pxx5109 122 cm 48 inch oy 55Pxx5109 140 cm 55 inch a 4 42Pxx5209 107 cm 42 inch 47Pxx5209 119 cm 47 inch A 55Pxx5209 140 cm 55 inch L
37. can set up your TV for both DVB T and DVB C Install one system followed by the other with the necessary settings Once each system is installed you need to switch the antenna input signal on the Antenna connection on the back of the TV and set the TV in the appropriate system to view the installed channels on TV To select the DVB T or DVB C setting see above DVB settings Access DVB settings 1 Press and select Setup and press OK 2 Select Search for channels and press OK 3 Select Re install Channels 4 Select the country where you install this TV 5 Select Cable DVB C 6 Select Start to search channels or select Settings for DVB C settings 7 Press gt repeatedly if necessary to close the menu Symbol rate mode If your cable provider did not give you a specific symbol rate value to install the TV channels leave the Symbol rate mode setting on Automatic If you received a specific symbol rate value select Manual However the value you received could be in the predefined list of symbol rates already Select Predefined symbol rates to check if your value is available automatically Symbol rate With the Symbol rate mode set to Manual you can enter the symbol rate value you received from your cable provider To enter the value use the number keys Network frequency With Frequency scan set to Quick or Advanced you can enter here the network frequency value received from your cable
38. channels or both Scrambled channels are marked with a key On Lock You can lock a channel First select a channel in the list press OPTIONS and select Lock You will have to enter the 4 digit child lock code A locked channel is marked with a lock Unlock To unlock a locked channel Select a locked channel in the list press OPTIONS and and select Unlock You will have to enter the 4 digit child lock code Copy channel list Copy channel list is intended for dealers and expert users With Channel list copy you can copy the channels installed on one TV onto another Philips TV of the same range Channel list copy will copy both terrestrial and satellite channels 7 3 Favourite satellite channels Favourite channels You can mark channels as favourite channels Your favourite satellite channels are collected in the Favourites list of the satellite channel list Watching favourite channels Set up a favourite channel list to easily switch between the channels you want to watch Only in this list you can reorder channels according to your preference To only switch between your favourite channels with 888 and E55 select the Favourites list in the channel list and close the channel list again There are two favourite lists one for TV channels and one for satellite channels E 22 Set up your favourites list To compose a list of your favourite channels 1 While watching a channel p
39. close the menu Audio Out format If you have a Home Theatre System HTS with multichannel sound processing capabilities like Dolby Digital DTS or similar set the Audio out format to Multichannel With Multichannel the TV can send the compressed multichannel sound signal from a TV channel or connected player to the Home Theatre System If you have a Home Theatre System without multichannel sound processing select Stereo To set the Audio Out format 1 Press and select Setup and press OK 2 Select TV settings gt Sound gt Advanced gt Audio out format 3 Select Multichannel or Stereo 4 Press gt repeatedly if necessary to close the menu Audio Out levelling Use the Audio Out leveling setting to level the volume loudness of the TV and the Home Theatre System when you switch over from one to another Volume differences can be caused by differences in sound processing To level the difference in volume 1 Press and select Setup and press OK 2 Select TV settings gt Sound gt Advanced gt Audio out leveling 3 If the volume difference is large select More If the volume difference is small select Less Press 2 repeatedly if necessary to close the menu Audio Out leveling affects both the Audio Out Optical and HDMI ARC sound signals Q K Problems with HTS SOUND CO Sound with loud noise o If you watch a video from a plugged in USB Rie or connec
40. diately to the next occurence of this word or number 4 Press OK again to jump to the subsequent occurence 5 To stop searching press A up until nothing is selected Text from a connected device Some devices that receive TV channels can also offer Text To open Text from a connected device 1 Press select the device and press OK 2 While watching a channel on the device press OPTIONS select Show device keys and select the Eg key and press OK 3 Press gt to hide the device keys 4 To close Text press gt again Digital Text UK only Some digital broadcasters offer dedicated Digital Text or interactive TV on their digital TV channels This includes normal Text using the number colour and arrow keys to select and navigate To close Digital Text press 2 b On In Text press OPTIONS to select i ie Text options Freeze page Unfreeze page I To stop the automatic rotation of subpages Ly Dual screen Full screen P To show the TV channel and Text alongside each other 5 O K 6 Q T O P overview To open T O P Text Enlarge Normal view To enlarge the Text page for comfortable reading Reveal To unhide hidden information on a page Cycle subpages To cycle subpages when these are available Language To switch the group of characters that Text uses to display correctly Text 2 5 To activate the Text 2 5 for more colours
41. dio description Speakers Headphones You can select where you want to hear the audio commentary On the TV speakers only on the headphones only or on both To set Speakers Headphones 1 Press and select Setup and press OK 2 Select Satellite settings gt Languages gt Audio description gt Speakers Headphones and press OK 3 Select Speakers Headphones or Speakers headphones and press OK 4 Press 2 repeatedly if necessary to close the menu Audio effect Some audio commentary can hold extra audio effects like stereo or fading sound To switch on Audio effects if available 1 Press and select Setup and press OK 2 Select Satellite settings gt Languages gt Audio description gt Audio effects and press OK 3 Select On or Off and press OK 4 Press 2 repeatedly if necessary to close the menu 27 2 Le M The audio commentary can also hold NU les for the words which are spoken Speech To switch on these subtitles if available Ly 1 Press and select Setup and press OK 4d 2 Select Satellite settings gt Languages gt Audio descf pripn gt Speech and press OK C 3 Select Descriptive audio or Subtitles and press OK 4 Press 2 repeatedly if necessary to close the menu o4 Q Manual installation Manual installation is intended for expert users You can use Manual installation to quickly add new channels from
42. e and press OK Lock a channel To prevent children from watching a channel or a programme you can lock channels or lock age rated programmes Lock a channel You can lock a channel to prevent children from watching it To watch a locked channel you need to enter the Child lock code You cannot lock programmes from connected devices To lock a channel 1 While watching a TV channel press Channel list 2 In any list select the channel you want to lock 3 Press OPTIONS and select Lock channel In a channel list a locked channel is marked with a lock LIST to open the To unlock a channel select the locked channel in the channel list press OPTIONS then select Unlock channel You will need to enter the Child lock code Parental rating To prevent children from watching a programme not suitable for their age you can use an age rating Some digital broadcasters have age rated their programmes When the age rating of a programme is equal to or higher than the age you have set as age rating for your child the programme will be locked To watch a locked programme you must enter the child lock code The parental age rating is set for all channels To set an age rating 1 Press and select Setup and press OK 2 Select Channel settings gt Child lock gt Parental rating and press OK 3 Enter a 4 digit Child lock code Enter a 4 digit Child lock code and confirm Now you can set an
43. e of the preferred audio languages is available you can select another audio language which is available Y L To set the primary and secondehgadio language 1 Press and select Setup and pres 2 Select Channel settings and select Be 3 Select Primary audio language or Secondayy audio language and press OK 4 Select a language and press OK h 5 Press 2 repeatedly if necessary to close the menti To select an audio ad when none of your eee language is available A 1 Press OPTIONS SA 2 Select Audio language and select an audio language you want e temporarily and press OK Audio languages for the hearing and visually impaired Some digital TV channels broadcast special audio and subtitles adapted for people who are hearing or visually impaired Menu language To change the language or the TV menus and messages 1 Press and select Setup and press OK 2 Select TV settings gt General settings gt Menu language and press OK 3 Select the language you want and press OK 4 Press gt repeatedly if necessary to close the menu 62 Channel installation Update channels Automatic update If you receive digital channels you can set the TV to automatically update the list with new channels Alternatively you can start a channel update yourself Automatic channel update Once a day at 6 AM the TV updates the channels and stores new channels New channels a
44. e the TV is switched on The TV detects the flash drive and opens a list showing its 2 b Q content A If the contents list does not appear SOURCE select USB and press OK To stop watching the USB flash drive MK ress MI EXIT or select another activity To disconnect the USB flash drive you can pull Mo flash drive anytime uA press eai BI 3 11 6 Photo camera To view photos stored on your digital photo camera you can connect the camera directly to the TV Use one of the USB connections on the TV to connect Switch on the camera after you made the connection wa If the contents list does not appear automatically press zii SOURCE select USB and press OK Your camera might need to be set to transfer its content with PTP Picture Transfer Protocol Read the user manual of the digital photo camera 342 Camcorder HDMI For best quality use an HDMI cable to connect the camcorder to the TV Camcorder 3 13 Computer Connect You can connect your computer to the TV and use the TV as a PC monitor With HDMI Use an HDMI cable to connect the computer to the TV With DVI to HDMI Alternatively you can use a DVI to HDMI adapter to connect the PC to HDMI and an audio L R cable mini jack 3 5mm to AUDIO IN L R on the back of the TV Settings Ideal monitor setting If your computer is added as a Computer type of device in the Source menu the list of connection
45. elect System and press OK Select your country or the part of the world where you are now Search channel To find a channel select Search channel and press OK Select Search and press OK You can also enter a frequency yourself If the reception is poor press Search again If you want to store the channel select Done and press OK Fine tune 22 D g O To fine tune a channel select Fint eune and press OK You can fine tune the channel with A or y Q If you want to store the channel found ject Done and press OK Store zz You can store the channel on the current channefumber or as a new channel number Select Store current channel or Store as new channel You can redo these steps until you found all available analoge TV channels Sy 6 Q 7 Satellite channels 74 Watching satellite channels Only for TVs with a built in satellite tuner To watch satellite channels Press and select Satellite and press OK The TV tunes to the satellite channel you last watched Change channel To change channels press 888 or 888 The TV will tune to the next channel in the selected channel list If you know the channel number you can use the number keys on the remote control To change back to the previously tuned channel press You can also tune to a channel directly from the Satellite channel list 7 2 Satellite channel list About the channel list When the satellite inst
46. ence or at random Show info Display the file name To close Browse USB press and select another activity 33 12 Settings 12 1 Tint With Colour temperature you can set the picture to a preset colour temperature or select Custom to set a temperature setting yourself with Custom colour temperature Colour temperature and Custom colour temperature are settings intended for expert users To select a preset 1 Press and select Setup and press OK 2 Select TV settings gt Picture gt Advanced gt Tint 3 Press right and select Normal Warm or Cool Select Custom if you want to set a colour temperature yourself 4 Press 2 repeatedly if necessary to close the menu 122 Custom tint With Custom tint you can set a colour temperature yourself To set a Custom tint first select Custom in the Tint setting to make the Custom tint menu available Custom tint is a setting intended for expert users To set a custom colour temperature 1 Press and select Setup and press OK 2 Select TV settings gt Picture gt Advanced gt Custom tint 3 Press right 4 Select a setting with the arrow keys WP is white point and BL is black level 5 Press OK to confirm a setting You can also select one of the presets in this menu 6 Press gt repeatedly if necessary to close the menu 12 3 Brightness With Brightness you can set the level of brightness of the p
47. eriod without a key press on the remote control of the TV To switch off the Switch off timer press and select Setup and press OK Select TV settings gt General settings gt Auto switch off and set the slider bar to Off 3 6 Home Theatre System HTS Connect HTS Use an HDMI cable to connect a Home Theatre System HTS to the TV You can connect a Philips Soundbar or an HTS with a built in disc player Alternatively you can use a SCART cable if the device has no HDMI connection HDMI ARC If your Home Theatre System has an HDMI ARC connection you can use any HDMI connection on the TV to connect With HDMI ARC you do not need to connect the extra audio cable The HDMI ARC connection combines both signals All HDMI connections on the TV can offer the Audio Return Channel ARC signal But once you connected the Home Theatre System the TV can only send the ARC signal to this HDMI connection Q If the Home Theatre System has no HDMI ARC connection Oy add an optical audio cable Toslink to send the sound of the TV picture to the Home Theatre System DIGITAL AUDIO OUT Home Theatre System Audio to video synchronisation sync If the sound does not match the video on screen you can set a delay on most Home Theatre Systems with a disc player to match the sound with the video Audio Out settings Audio Out delay With a Home Theatre System HTS connected to the TV the pictu
48. es not respond to the remote control or TV controls This is normal behaviour If the TV continues to be unresponsive to the remote control you can check if the remote control is working by means of a mobile phone camera Put the phone in camera mode and point the remote control to the camera lens If you press any key on the remote control and you notice the infra red LED flicker through the camera the remote control is working The TV needs to be checked If you do not notice the flickering the remote control might be broken or its batteries are low This method of checking the remote control is not possible with remote controls which are wirelessly paired with the TV The TV goes back to standby after showing the Philips startup screen When the TV is in standby a Philips startup screen is displayed 44 Y Z then the TV returns to standby gde This is normal behaviour When the TV is disconnected and r amp g pnected to the power supply the startup screen is displayed foe next startup To switch on the TV from standby press on tfe remote control or the TV P b D The standby light keeps on blinking 2 Disconnect the power cable from the power outlet minutes before you reconnect the power cable If the blin reoccurs contact Philips TV Consumer Care et e Wrong menu language s Change the language back to your language 1 Press and select Setup and press OK 2 Select TV settings gt Genera
49. f your device only has a k3 connection Use one of the HDMI connections and add ne O Audio L R cable mini jack 3 5mm to Audio In for sound on Ye the back of the TV Th Copy protection DVI and HDMI cables support HDCP High bandwidth Digital Content Protection HDCP is a copy protection signal that prevents copying content from a DVD disc or Blu ray Disc Also referred to as DRM Digital Rights Management HDMI ARC HDMI 1 connection on the TV have HDMI ARC Audio Return Channel If the device typically a Home Theatre System HTS also has the HDMI ARC connection connect it to HDMI 1 on this TV With the HDMI ARC connection you do not need to connect the extra audio cable that sends the sound of the TV picture to the HTS The HDMI ARC connection combines both signals In case you prefer to switch off ARC on the HDMI connections press and select Setup and press OK Select TV settings gt Sound gt Advanced gt HDMI 1 ARC Scart SCART is a good quality connection The SCART connection can be used for CVBS and RGB video signals but cannot be used for High Definition HD TV signals The SCART connection combines video and audio signals Use the SCART adapter cable to connect your device Blu ray Disc player nna Audio Out Optical Audio Out Optical is a high quality sound connection This optical connection can carry 5 1 audio channels If your device typically a Home Theatre Syste
50. ftware 43 5 1 Key overview 14 15 Troubleshooting and support 44 52 Batteries 14 5 1 Troubleshooting 44 5 3 Cleaning 15 5 2 Register 45 5 3 Help 45 6 TY channels 16 54 Online help 45 6 1 Watching TV channels 16 5 5 Consumer Care Repair 45 6 2 Channelinstalation 19 16 Safety and care 47 7 Satellite channels 23 y 6 1 Safety 47 7 4 Watching satellite channels 23 62 Screencare 48 7 2 Satellite channel list 23 7 33 Favourite satellite channels 23 17 Terms of use copyrights and licenses 49 7 4 Lock satellite channels 24 7 4 Terms ofuse 49 7 5 Satellite installation 25 72 Copyrights and licenses 49 7 6 Problems with satellites 27 Index 51 8 TV guide 29 8 1 Using the TV guide 29 9 Sources 30 9 1 Sources list 30 9 2 From standby 30 9 3 Easylink 30 10 Timers and clock 31 10 1 Sleep timer 31 10 2 Clock 31 10 3 Auto switch off 31 11 Your photos videos and music 32 1 Your new TV EasyLink With EasyLink you can operate a connected device like a Bluray Disc player with the remote control of the TV EasyLink uses HDMI CEC to communicate with the connected devices LINK Sy TA Setting up Read safety Read the safety instructions first before you use the TV In Help go to Safety and care gt Safety 2 2 TV stand and wall mounting TV stand You can find the instructions for mounting the TV stand in the Quick Start Guide that came with the TV In case you lost this guide you can download it from www phili
51. guages are available the TV will show them If none of the preferred subtitle languages are available you can select another subtitle language which is available To set the primary and secondary subtitle language 1 Press and select Setup and press OK 2 Select Channel settings and select Languages 3 Select Primary subtitle language or Secondary subtitle language and press OK 4 Select a language and press OK 5 Press 2 repeatedly if necessary to close the menu To select a subtitle language when none of your preferred languages are available 1 Press OPTIONS 2 Select Subtitle language and select a language you want temporarily and press OK Subtitles for analogue channels For analogue channels you need to make the subtitles available for each channel manually 1 Switch to a channel and press TEXT to open Text 2 Enter the page number for subtitles usually 888 3 Press TEXT again to close Text If you select On in the Subtitle menu when watching this analogue channel subtitles will be shown if available To know if a channel is analogue or digital switch to the channel and open Status in the Options menu Audio languages Digital TV channels can broadcast audio with several spoken languages for a programme You can set a preferred primary and secondary audio language If audio in one of these languages is available the TV will switch to this audio If non
52. icture signal Brightness is a setting intended for expert users We recommend non expert users to adjust the brightness with the Backlight contrast setting To adjust the level 1 Press and select Setup and press OK 2 Select TV settings gt Picture gt Advanced gt Brightness 3 Press right and adjust the value with A up or down 4 Press 2 repeatedly if necessary to close the menu 34 A k moo M Q Game or computer 4 You can switch the TV to the ideal picture seffing for gaming or for using the TV as a computer monitor There g different setting for Game or Computer If a device has a corfect type set in the Source menu Game console or Computer t switches automatically to the ideal setting when you swit the device If you switch the setting manually do not ee A switch tt off when you switch to watching TV or another G connected device On To switch the setting manually 1 Press and select Setup and press OK 2 Select TV settings gt Picture gt Advanced gt Game or computer 3 Select Game Computer or TV The setting TV retums to the picture settings for watching TV 4 Press 2 repeatedly if necessary to close the menu 12 5 Format and edges Screen edges With Screen edges you can slightly enlarge the picture to hide distorted edges To adjust the edges 1 Press and select Setup and press OK 2 Select TV settings gt Picture
53. implied TP Vision Europe responsible neither for any errors in the c document nor for any problems as a resu than those specified uitability must be that the material itself ts No further warranty B V cannot be held ontent of this t of the content in this document Errors reported to Philips will be adapted and published on the Philips support website as soon as possible Terms of warranty Risk of injury damage to TV or void of warranty Never attempt to repair the TV yourself Use the TV and accessories only as intended by the manufacturer The caution sign printed on the back of the TV indicates risk of electric shock Never remove the TV cover Always contact Philips TV Customer Care for service or repairs Any operation expressly prohibited in this manual or any adjustments and assembly procedures not recommended or authorised in this manual shall void the warranty Pixel characteristics This LCD LED product has a high number of colour pixels Although it has effective pixels of 99 999 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a compliance This product is in compliance malfunction CE with the essential requirements and other relevant provisions of Directives 2006 95 EC Low Voltage 2004 108 EC EMC and
54. in onscreen for extended periods of time Stationary images include onscreen menus black bars time displays etc If you must use stationary images reduce screen contrast and brightness to avoid screen damage 48 17 Terms of use copyrights and licenses 17 1 Terms of use 2014 TP Vision Europe B V All rights reserved This product was brought to the market by TP Vision Europe B V or one of tts affiliates hereinafter referred to as TP Vision which is the manufacturer of the product TP Vision is the warrantor in relation to the TV with which this booklet was packaged Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N V Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips N V or their respective owners TP Vision reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly The written material packaged with the TV and the manual stored in the memory of the TV or downloaded from the Philips website are believed to be adequate for the intended use of the system The material in this manual is believed adequate for the intended use of the system If the product or tts individual modules or procedures are used for purposes other herein confirmation of their validity and s obtained TP Vision Europe B V warrants does not infringe any United States paten is expressed or
55. l settings gt Menu language and press OK 3 Select the language you want and press OK 4 Press 2 repeatedly if necessary to close the menu Picture No picture distorted picture Make sure that the antenna is properly connected to the TV Make sure that the correct device is selected as the display source Make sure that the external device or source is properly connected Sound but no picture Make sure that the picture settings are set correctly Poor antenna reception Make sure that the antenna is properly connected to the TV Loud speakers unearthed audio devices neon lights high buildings and other large objects can influence reception quality If possible try to improve the reception quality by changing the antenna direction or moving devices away from the TV If reception on only one channel is poor fine tune this channel Poor picture from a device Make sure that the device is connected properly Make sure that the picture settings are set correctly Picture settings change after a while Make sure that Location is set to Home You can change and save settings in this mode A commercial banner appears Make sure that Location is set to Home Picture does not fit the screen Change to a different picture format Press Emi Picture format keeps changing with different channels Select a non Auto picture format Picture position is incorrect Pictu
56. lect TV settings gt Sound gt Advanced gt TV speakers 3 Press right and select Off On EasyLink or EasyLink autostart 4 Press 2 repeatedly if necessary to close the menu To switch speakers directly 1 While watching TV press OPTIONS and select Picture and sound 2 Select Speakers and select TV or Amplifier audio device 3 Press gt repeatedly if necessary to close the menu Clear sound With Clear sound you improve the sound for speech Ideal for news programmes You can switch the speech improvement on or off To switch on or off 1 Press and select Setup and press OK 2 Select TV settings gt Sound gt Advanced gt Clear sound 3 Press right and select On or Off 4 Press 2 repeatedly if necessary to close the menu HDMI1 ARC If you do not need an Audio Return Channel ARC on any of the HDMI connections you can switch the ARC signal off Audio Out format With Audio Out format you can set the audio out signal of the TV to fit the sound processing capabilities of your Home Theatre System Audio Out levelling With Audio Out leveling you can level the sound volume of the Home Theatre System with the volume of the TV when you switch over from one to another Audio Out delay If you set an Audio sync delay on your Home Theatre System to synchronise the sound with the picture you must switch off Audio Out delay on the TV 36 o
57. ly Place the TV on a flat level surface that can support eie of the TV and the stand When wall mounted ensure that the wall mount can safely gt bear the weight of the TV set TP Vision bears no responsibility 6 fori a Q or improper wall mounting that results in accident injury or damage Parts of this product are made of glass Handle with care to avoid injury or damage Risk of damage to the TV Before you connect the TV to the power outlet ensure that the power voltage matches the value printed on the back of the TV Never connect the TV to the power outlet if the voltage is different Risk of injury to children Follow these precautions to prevent the TV from toppling over and causing injury to children Never place the TV on a surface covered by a cloth or other material that can be pulled away Ensure that no part of the TV hangs over the edge of the mounting surface Never place the TV on tall furniture such as a bookcase without anchoring both the furniture and TV to the wall or a suitable support Teach children about the dangers of climbing on furniture to reach the TV Risk of swallowing batteries The remote control may contain coin type batteries which can easily be swallowed by small children Keep these batteries out of reach of children at all times Risk of overheating Never install the TV in a confined space Always leave a space of at least 10 cm or 4 inches aro
58. m HTS has no HDMI ARC connection you can use this connection with the Audio In Optical connection on the HTS The Audio Out Optical connection sends the sound from the TV to the HTS DIGITAL AUDIO OUT Home Theatre System You can set the type of the audio out signal to fit the audio capabilities of your Home Theatre System If the sound does not match the video on screen you can adjust the audio to video synchronization 3 2 EasyLink HDMI CEC EasyLink With EasyLink you can operate a connected device with the TV remote control EasyLink uses HDMI CEC Consumer Electronics Control to communicate with the connected devices Devices must support HDMI CEC and must be connected with an HDMI connection EasyLink setup The TV comes with EasyLink switched on Make sure that all HDMI CEC settings are properly set up on the connected EasyLink devices EasyLink might not work with devices from other brands HDMI CEC on other brands The HDMI CEC functionality has different names on different brands Some examples are Anynet Aquos Link Bravia Theatre Sync Kuro Link Simplink and Viera Link Not all brands are fully compatible with EasyLink Example HDMI CEC branding names are property of their respective owners oy Q M tn 5 Operate devices 2 4 To operate a device connected to HDMI and set bp with EasyLink select the device or its activity in the list ef connections Press
59. mm Height 720 6 mm Depth 78 mm Weight 16 8 kg with TV stand Width 1243 2 mm Height 770 5 mm Depth 270 mm Weight 19 4 kg 40 O o Connectivity_20 28 4009 4109 4209 5219 K For PxKxxx9 ks Ge TV Rear HDMI 1 ARC HDMI Audio Return Channel s SERV U Service port 6 TV ANTENNA 75 ohm coaxial IEC e SCART RGB CVBS SCART adaptor AUDIO IN DVI Stereo 3 5mm mini jack DIGITAL AUDIO OUT SPDIF Headphones Stereo 3 5mm mini jack VGA PC input TV Side CI Common Interface USB Satellite For PxHxxx9 PxTxxx9 TV Rear HDMI 1 ARC HDMI Audio Return Channel SERV U Service port TV ANTENNA 75 ohm coaxial IEC SCART RGB CVBS SCART adaptor AUDIO IN DVI Stereo 3 5mm mini jack DIGITAL AUDIO OUT SPDIF Headphones Stereo 3 5mm mini jack VGA PC input TV Side CI Common Interface USB 13 10 Connectivity 32 39 41x9 For PxKxxx9 TV Rear HDMI 2 SERV U Service port TV ANTENNA 75 ohm coaxial IEC SCART RGB CVBS SCART adaptor TV Side DIGITAL AUDIO OUT SPDIF HDMI 1 HDMI Audio Retum Channel Cl Common Interface USB Satellite For PxHxxx9 PxTxxx9 TV Rear HDMI 2 SERV U Service port TV ANTENNA 75 ohm coaxial IEC SCART RGB CVBS SCART adaptor TV Side DIGITAL AUDIO OUT SPDIF HDMI 1 HDMI Audio Retum Channel Cl Common Interface USB 1
60. model number Go to www philips com support On the support site you can find your country s telephone number to contact us as well as answers to frequently asked questions FAQs In some countries you can chat with one of our colaborators and ask your question directly or send a question by email You can download new TV software or the manual to read on your computer 15 5 Consumer Care Repair For support and repair call the Consumer Care hotline in your country Find the telephone number in the printed documentation that came with the TV Or consult our website www philips com support TV model number and serial number You might be asked to provide the TV product model number and serial number Find these numbers on the packaging label or on the type label on the back or bottom of the TV 4 Warning Do not attemp to repair the TV yourself This may cause severe injury irreparable damage to your TV or void your warranty 46 16 Safety and care 16 1 Safety Important Read and understand all safety instructions before you use the TV If damage is caused by failure to follow instructions the warranty does not apply Secure the TV from falling over Always use the supplied wall bracket to secure the TV from falling over Mount the bracket and secure the TV onto the bracket even if you put the TV on the floor You can find the mounting instructions in the Quick Start Guide that c
61. nes to the TV channel you last watched Alternatively press ff to open the Home menu and select TV and press OK To switch channels press 828 or 88 If you know the channel number type in the number with the number keys Press OK after you entered the number to switch channel To switch back to the previously tuned channel press gt To switch to a channel from a channel list While watching a TV channel press LIST to open the channel lists The channel list can have several pages with channels To view the next or previous page press 888 or EEE To dose the channel lists without switching channel press LIST again Radio channels If digital broadcasting is available digital radio station are installed during installation Switch to a radio channel just like you switch toa TV channel aN FN ra Channel list K 1 While watching a TV channel press LIST open the channel list E 2 Press OPTIONS to open Option menu W 3 Select List then you can select All Favourites Radio 4e New channels View all channel list O On Favourite channels You can create a favourite channel list that only holds the channels you want to watch With the Favourite channel list selected you will only see your favourite channels when you switch through channels Create your favourite channel list 1 While watching a TV channel press LIST to open the channel list
62. on from standby and switches to the correct source One touch standby When you press on the TV remote control the TV and all HDMI CEC compliant devices switch to standby mode System audio control If you connect an HDMI CEC compliant device that includes speakers through the HDMI ARC connector you can choose to hear the TV audio from those speakers instead of the TV speakers 33 Common interface CAM Cl This TV is ready for the Cl Conditional Access With Cl you can watch premium HD programmes like movies and sports offered by digital TV broadcasters in your region These programmes are scrambled by the TV broadcaster and descrambled with a prepaid Cl module Digital TV broadcasters provide this Cl module Conditional Access Module CAM when you subscribe to their premium programmes These programmes have a high level of copy protection Contact a digital TV broadcaster for more information on terms and conditions CI CAM Insert a CAM module Switch off the TV before inserting a CAM Look on the CAM for the correct method of insertion Incorrect insertion can damage the CAM and TV Use the Common Interface slot on the TV to insert the CAM card With the front of the card facing to you gently insert the CAM as far as it will go Leave the card in the slot permanently It may take a few minutes petro c CAM is activated Removing the CAM will deactivate Te oadcast service on
63. onding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licences This offer is valid up to three years after product purchase to anyone in receipt of this information To obtain the source code please write in English to Intellectual Property Dept TP Vision Europe B V Prins Bernhardplein 200 1097 JB Amsterdam The Netherlands 15 Troubleshooting and support 15 1 Troubleshooting Channels No digital channels found during the installation See the technical specifications to make sure that your TV supports DVB T or DVB C in your country Make sure that all cables are properly connected and that the correct network is selected Previously installed channels are not in the channel list Make sure that the correct channel list is selected General The TV does not switch on Disconnect the power cable from the power outlet Wait for one minute then reconnect it Make sure that the power cable is securely connected Creaking sound at startup or switch off When you are turning the TV on off or to standby you hear a creaking sound from the TV chassis The creaking sound is due to the normal expansion and contraction of the TV as it cools and warms up This does not affect performance TV does not respond to the remote control The TV requires some time to start up During this time the TV do
64. ossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed with normal household waste Please find out for yourself about the local rules on separate collection of batteries because correct disposal will help to prevent negative consequences for the environment and human health 13 2 Reception for PxH xxx9 PxTxxx9 Aerial input 75 ohm coaxial IEC75 Tuner bands Hyperband S Channel UHF VHF DVB DVB T terrestrial antenna COFDM 2K 8K DVB T2 only for TV types T 12 DVB C cable QAM Analogue video playback NTSC SECAM PAL Digital video playback MPEG2 SD HD ISO IEC 13818 2 MPEG4 SD HD ISO IEC 14496 10 Digital audio playback ISO IEC 13818 3 13 3 Reception for PxKxxx9 Aerial input 75 ohm coaxial IEC75 Tuner bands Hyperband S Channel UHF VHF DVB DVB T terrestrial antenna COFDM 2K 8K DVB T2 only for TV types T 12 DVB C ca
65. ou need to enter thgjChild lock code You cannot lock programmes from connected amp yices Lock a channel To lock a channel e 1 While watching a TV channel press LIST to open the Channel list 2 In any list select the channel you want to lock 3 3 Press OPTIONS and select Lock channel In a channel list EA a locked channel is marked with a lock To unlock a channel select the locked channel in the channel list and select the Unlock channel option You will need to enter the Child lock code Use an age rating To prevent children from watching a programme not suitable for their age you can use an age rating Some digital broadcasters have age rated their programmes When the age rating of a programme is equal to or higher than the age you have set as age rating for your child the programme will be locked To watch a locked programme you must enter the child lock code The parental age rating is set for all channels To set an age rating 1 Press and select Setup and press OK 2 Select Satellite settings gt Child lock gt Parental rating and press OK 3 Enter a 4 digit Child lock code If you did not set a code yet select Set code and press OK Enter a 4 digit Child lock code and confirm Now you can set an age rating 4 Set the age and press OK 5 Press repeatedly if necessary to close the menu 6 To switch off the parental age rating select None as age setting
66. play Select Picture Music or Movie Alternatively you can open the Folders view and browse your folders to look for a file View photos In the USB browser select Picture and press OK Options Press OPTIONS 32 2 b Z O Start slideshow Stop slideshow Start or stop slideshow Q 2 O Slideshow transitions K Set the transition from one picture to the ne 1 Slideshow frequency P Select the display time for each photo Ce 5 Repeat Play once s View the pictures repeatedly or once only SA Q Shuffle off Shuffle on View the pictures in sequential order or at random Rotate image Rotate photo Show info Display the picture name date size and next picture in the slide show To close Browse USB press and select another activity Play music In the USB browser select Music and press OK Options Press OPTIONS Stop playback top music play Wn Repeat Play once ay songs repeatedly or once u Shuffle on Shuffle off Play songs in sequence or at random Show info Display the file name To close Browse USB press and select another activity Play videos In the USB browser select Movie and press OK Options Press OPTIONS Subtitles Display the subtitles if available Audio language Play the audio language if available Repeat Play once Play videos repeatedly or once Shuffle on Shuffle off Play videos in sequ
67. prised in this television this product and included to enable you to use interactive television features is owned by S amp T CLIENT SYSTEMS LIMITED the Owner You are permitted to use the Software only in conjunction with this product Kensington K Kensington and Micro Saver are registered US trademarks of ACCO World Corporation with issued registrations and pending applications in other countries throughout the world Other trademarks All other registered and unregistered trademarks are the property of their respective owners 50 PHILIPS Contact information Argentina 0800 444 7749 Buenos Aires 0810 444 7782 Belgi Belgique 070 700 035 0 15 min Bosna i Hercegovina 033 941 251 Lokalni poziv Brazil 0800 701 0245 Sao Paulo 2938 0245 Bpaapua 02 4916 273 HauwoHa eH Homep Cesk republika 228880895 M stn tarif Danmark 3525 8314 Deutchland 0180 501 04 69 0 14 Min EANGSa 2111983028 EOvuc von Espana 902 88 10 83 0 10 0 08 min Estonia 6683061 Kohalikud k ned France 01 57 32 40 50 local Hrvatska 01 777 66 01 Lokalni poziv Italia 0245 28 70 14 chiamata nazionale Ireland 0818 210 140 national call Northern Ireland 0844 338 04 88 5p min BT landline KasakcraH 8 10 800 2000 00 04 free Latvia 6616 3263 Viet jais tarifs Lithuania 8 5 214 0293 Vietinais tarifais Luxembourg Luxemburg 2487 1100 Nationale Ruf
68. ps com Use the product type number of the TV to look for the Quick Start Guide to download Wall mounting Your TV is also prepared for a VESA compliant wall mount bracket sold separately Use the following VESA code when purchasing the wall mount 20Pxx4109 VESA MIS F 75x75 M4 22Pxx4109 VESA MIS F 75x75 M4 23Pxx4009 VESA MIS F 75x75 M4 24Pxx4109 VESA MIS F 75x75 M4 28Pxx4109 VESA MIS F 100x100 M4 32Pxx41x9 VESA MIS F 400x200 M 39Pxx41x9 VESA MIS F 400x200 M 40Pxx41x9 VESA MIS F 400x200 M 42Pxx41x9 VESA MIS F 400x200 M 47Pxx41x9 VESA MIS F 400x200 M O0 B OW Od 50Pxx41x9 VESA MIS F 400x400 M6 22Pxx4209 VESA MIS F 75x75 M4 24Pxx5219 VESA MIS F 75x75 M4 32Pxx43x9 VESA MIS F 100x100 M 40Pxx43x9 VESA MIS F 200x200 M 50Pxx43x9 VESA MIS F 400x200 M 4 4 6 32Pxx5109 VESA MIS F 400x200 M6 40Pxx5109 VESA MIS F 400x200 M6 48Pxx5109 VESA MIS F 400x200 M6 55Pxx5109 VESA MIS F 400x400 M6 6 42Pxx5209 VESA MIS F 200x200 M 2 be Q O 47Pxx5209 VESA MIS F 4005460 M6 55Pxx5209 VESA MIS F 4004000 e O To fix the bracket securely use screws with depth indicated in the drawing 1 L 9 KA con Q Caution Wall mounting the TV requires special skills and should only be performed by qualified personnel The TV wall mounting should meet safety standards according to the T
69. re on TV and the sound from the HTS should be synchronised Automatic audio to video sync With recent Philips Home Theatre Systems the audio to video sync is automatically synchronised and always correct Audio sync delay For some Home Theatre Systems you might need to adjust the audio sync delay to synchronise the audio to video On the HTS increase the delay value until there is a match between picture and sound A delay value of 180ms may be required Read the user manual of the HTS With a delay value set up on the HTS you need to switch off Audio Out delay on the TV To switch off the Audio Out delay 1 Press and select Setup and press OK 2 Select TV settings gt Sound gt Advanced gt Audio out delay 3 Select Off and press OK 4 Press 2 repeatedly if necessary to close the menu o Audio Out offset If you cannot set a delay on the Home Theatre System you can set the TV to sync the sound You can set an offset that compensates the time necessary for the Home Theatre System to process the sound of the TV picture You can set the value in steps of 1ms Maximum setting is 12ms The Audio out delay setting should be switched on To synchronise the sound on the TV 1 Press and select Setup and press OK 2 Select TV settings gt Sound gt Advanced gt Audio out offset 3 Use the slider bar to set the sound offset and press OK 4 Press gt repeatedly if necessary to
70. re signals from some devices may not fit the screen correctly Check the signal output of the connected device Computer picture is not stable Make sure that your PC uses the supported resolution and refresh rate Sound No sound or poor sound quality If no audio signal is detected the TV automatically switches the audio output off this does not indicate malfunction Make sure that the sound settings are correctly set Make sure that all cables are properly connected Make sure that the volume is not muted or set to zero Make sure that the TV audio output is connected to the audio input on the Home Theatre System Sound should be heard from the HTS speakers Some devices may require you to manually enable HDMI audio output If HDMI audio is already enabled but you still do not hear audio try changing the digital audio format of the device to PCM Pulse Code Modulation Refer to the documentation accompanying your device for instructions Connections HDMI Note that HDCP High bandwidth Digital Content Protection support can delay the time taken for a TV to display content from an HDMI device If the TV does not recognise the HDMI device and no picture s displayed switch the source from one device to another and back again If there are intermittent sound disruptions make sure that output settings from the HDMI device are correct If you use an HDMI to DVI adapter or HDMI to D
71. re stored in the All channels list but also in the New channels list Empty channels are removed If new channels are found or if channels are updated or removed a message is shown at TV start up The TV must be in standby to automatically update channels To switch off the message at start up 1 Press and select Setup and press OK 2 Select Channel settings and press OK 3 Select Channel installation gt Channel update message gt Off To switch off the Automatic channel update 1 Press and select Setup and press OK 2 Select Channel settings and press OK 3 Select Channel installation gt Automatic channel update gt Off Start an update To start an update yourself 1 Press and select Setup and press OK 2 Select Search for channels and press OK 3 Select Update channels and follow the instructions on screen The update may take a few minutes In certain countries the Automatic channel update is done while watching TV or any moment when the TV is in standby New channels New channels added with the automatic channel update are easy to find in the channel list New The same new channels are also stored in the All or Radio channel list New channels are kept in the channel list New as long as you don t mark them as a favourite or tune to them Reinstall channels You can search for and reinstall channels and leave all other TV settings untouched Alternatively you
72. ress LIST to open the channel list 2 Select the Favourites list 3 The TV will ask you to start adding channels immediately Press OK To avoid a lot of reordering later select the channels in the order you want them in the list 4 To add a channel to the Favourites list select the channel and press OK You can then select another channel to add as a favourite 5 To finish press 2 Add or remove favourite channels To add or remove favourites list 1 While watching a TV channel press z LIST to open the channel list 2 Select the channel to mark as favourite and press OPTIONS 3 Selecte Add favourites and press OK The selected channel is marked with a yr 4 To finish press gt The channels are added to the Favourites list To remove a channel from the favourites list select Remove favourites and press OK Reorder favourite channels You can only reorder channels in the Favourites list 1 In the Favourites list All highlight the channel you want to reposition 2 Press OPTIONS 3 Select Reorder and press OK 4 Select the channel to reorder and press OK 5 Press the Navigation buttons to move the highlighted channel to another location and press OK 6 Once complete press OPTIONS 7 Select Exit reorder and press OK 74 Lock satellite channels 24 if C You can lock a channel to prevent ui watching it To watch a locked channel y
73. s the TV is set to the ideal Computer setting automatically If you use your computer to watch movies or use it to play games you might want to set the TV back to the ideal TV watching or gaming setting To set the TV to the ideal setting manually 1 Press and select Setup and press OK 2 Select TV settings gt Picture gt Advanced gt Game or compter and press OK 3 Select Game for gaming or select Computer for watching a movie and press OK 4 Press gt repeatedly if necessary to close the menu Remember to set the Game or computer setting back to Computer when you stop playing the game Q O 2o 3 14 uz amp Headphones You can connect a set of headphones to egAnection on the TV The connection is a mini jack 3 5mm You fjyadjust the volume of the headphones separately hb Q 24 Os 2 Select TV settings gt Sound gt Headphone volume and SA press OK To adjust the volume 1 Press and select Setup and press OK 3 Press A up or W down to adjust the volume 4 Press 2 repeatedly if necessay to close the menu 4 Switch on 4 1 On or Standby Make sure you plugged in the mains power on the back of the TV before you switch on the TV If the red indicator light is off press the power button on the side ofthe TV to put the TV in standby the red indicator will light up With the TV in standby press on the remote control
74. s gt repeatedly if necessary to close the menu Advanced sound settings Auto volume levelling With Auto volume leveling you can set the TV to automatically level out sudden volume differences Typically at the beginning of adverts or when you are switching channels To switch on or off 1 Press and select Setup and press OK 2 Select TV settings gt Sound gt Advanced gt Auto volume leveling 3 Press right and select On or Off 4 Press 2 repeatedly if necessary to close the menu TV speakers You can send the TV sound to a connected audio device a Home Theatre System or audio system With TV speakers you select where you want to hear the TV sound and how you want to control it f you select Off you permanently switch off the TV speakers f you select On the TV speakers are always on With an audio device connected with HDMI CEC you can use one of the EasyLink settings f you select EasyLink the TV sends the TV sound to the audio device The TV will switch off the TV speakers when the device is playing the sound If you select EasyLink autostart the TV will switch on the audio device send the TV sound to the device and switch off the TV speakers With EasyLink or EasyLink autostart selected you can still switch to TV speakers or device speakers in the Picture and sound menu To set the TV speakers 1 Press and select Setup and press OK 2 Se
75. s may take a few minutes satelite is found its name and reception strength are shown onSggeen If a channel package is available for any of the satellites fountapy can select the package you want 6 6 To install the channels of the satellites found select Install arp press OK The TV shows the number of channels and radio 6 stations found 7 To store the satellite settings all satellite channels and satellite radio stations select Finish and press OK Channel packages About channel packages Satellites can offer channel packages that bundle free channels free to air and offer a sorting that suits a country Some satellites offer subscription packages a collection of channels you pay for If you choose a subscription package the TV might ask you to select a Quick or Full installation Select Satellite operator channels only to install the channels of the package only or select All satellite channels to install the package and all other available channels too We recommend a Quick installation for subscription packages If you have additional satellites that are not part of your subscription package we recommend a Full installation All installed channels are put in the channels list All Unicable setup The Unicable system You can use a Unicable system to connect the antenna dish to the TV A Unicable system uses one cable to connect the satellite dish to all satellite receivers in its system
76. s menu O 8 OK key Th To confirm a selection or setting kom 9 Arrow navigation keys To navigate up down left or right 10 LIST To open or close the channel list Bottom 1 2 Volume To adjust the volume level 2 Number keys and text keypad To select a TV channel directly or to enter text 3 SUBTITLE To switch subtitles on off or Automatic 4 88 Channel To switch to the next or previous channel in the channel list to open the next or previous page in Text or start the next or previous chapter on a disc 5 Mute To mute the sound or to restore it 6 TEXT To open or close Text Teletext 5 2 Batteries 1 Slide the battery door in the direction shown by the arrow 2 Replace the old batteries with 2 type AAA LR03 1 5V batteries Make sure the and the ends of the batteries line up correctly 3 Reposition the battery door 4 Slide it back until it clicks E e qu Remove the batteries if you are not using the remote control for a long time Safely dispose of your old batteries according to the end of use directions 5 3 Cleaning Your remote control is treated with a scratch resistant coating To clean the remote control use a soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the remote control TV channels 6 1 Watching TV channels Switch channels To watch TV channels press GJ The TV tu
77. st of the other TV 3 To start the channel list upload press and select Setup and press OK 4 Select TV settings gt General settings gt Copy channel list gt Copy to TV and press OK You might be asked to enter the Child lock code of this TV 5 The TV notifies you if the channel list is copied to the TV successfully Unplug the USB memory device To an already installed TV 1 Verify the country setting of the TV To verify this setting press and select Setup and press OK Select Search for channels gt Reinstall channels and press OK Press gt and later Cancel to leave the Search for channels If the country is correct continue with step 2 If the country is not correct you need to start a reinstallation To start the reinstallation press and select Setup and press OK Select TV settings gt General settings gt Re install TV gt OK Select the correct country and skip the Search for channels Finish the installation When done continue with step 2 2 Plug in the USB memory device that holds the channel list of the other TV 3 To start the channel list upload press and select Setup and press OK 4 Select TV settings gt General settings gt Copy channel list gt Copy to TV and press OK You might be asked to enter the Child lock code of this TV 5 The TV notifies you if the channel list is copied to the TV successfully Unplug the USB memory device DVB T or DVB C
78. ted computer the sound from your Home eatre System might be distorted 1 Press and select Setup and press OK S 2 Select TV settings gt Sound gt Advanced gt Audio out e format o Q No sound If you cannot hear the sound from the TV on your Home Theatre System check the following Check if you connected the HDMI cable to a HDMI ARC connection on the Home Theatre System All HDMI connections on the TV are HDMI ARC connections Check if the HDMI ARC setting on the TV is switched On Go to gt Setup gt TV settings gt Sound gt Advanced gt HDMI 1 ARC 3 7 Blu ray Disc player Use a High speed HDMI cable to connect the Blu ray Disc player to the TV Blu ray Disc player a EET If the Blu ray Disc player has EasyLink HDMI CEC you can operate the player with the TV remote control 3 8 DVD player Use an HDMI cable to connect the DVD player to the TV Alternatively you can use a SCART cable if the device has no HDMI connection DVD player coy If the DVD player is connected with HDMI and has EasyLink CEC you can operate the player with the TV remote control 3 9 Game console HDMI For best quality connect the game console with an High speed HDMI cable to the TV Game console 3 10 USB flash drive You can view photos or play your music and videos from a connected USB flash drive Insert a USB flash drive in one of the USB connections on the TV whil
79. to switch the TV On Switch to standby To switch the TV to standby press on the remote control Switch Off To switch the TV Off press the power button on the side of the TV The red indicator light is off The TV is still connected to the mains power but consumes a minimum of energy To switch off the TV completely disconnect the power plug When disconnecting the power plug always pull the power plug never the cord Ensure that you have full access to the power plug power cord and outlet socket at all times 5 Remote control 51 Key overview Top 1 Standby On To switch the TV On or back to Standby 2 Playback keys Play to playback Pause 8 to pause playback Stop amp to stop playback Rewind 44 to rewind Fast forward PP to go fast forward 3 TV GUIDE To open or close the TV guide 4 SETUP To open the Settings menu 5 FORMAT To open or close the Picture format menu Middle 1 EB SOURCES To open or close the Sources menu the list of connected devices 2 Colour keys The buttons function follow the on screen instructions 3 INFO To open or dose programme info 4 BACK Y Z O To switch back to the previous camel you selected To dose a menu without changing ae ing 5 A HOME w To open or close the home menu L 6 EXIT 1 To switch back to watching TV E 7 OPTIONS CS To open or dose the Option
80. to a 16 9 format Unscaled Expert mode for HD or PC input Pixel for pixel display Black bars may appear with pictures from a computer 43 Display the classic 4 3 format Text Teletext Text pages To open Text Teletext while you are watching TV channels press TEXT To dose Text press TEXT again Select a Text page To select a page 1 Enter the page number with the number keys 2 Use the arrow keys to navigate 3 Press a colour key to select a colour coded subject at the bottom of the screen Text sub pages A Text page number can hold several subpages The subpage numbers are shown on a bar next to the main page number To select a subpage press lt or P T O P Text pages Some broadcasters offer T O P Text To open T O P Text pages within Text press OPTIONS and select T O P overview Favourite pages The TV makes a list of the last 10 Text pages you opened You can easily reopen them again in the Favourite Text pages column 1 In Text select the star in the top left corner of the screen to show the column of favourite pages 2 Press W down or A up to select a page number and press OK to open the page You can clear the list with the option Clear favourite pages Search Text You can select a word and scan Text for all occurences of this word 1 Open a Text page and press OK 2 Select a word or number with the arrow keys 3 Press OK again to jump imme
81. to the previous day Alternatively you can press OPTIONS and select Change 29 Y E A day Q Select Previous day Today or Next and press OK to select the day of the schedule 4o K Search by genre If the information is available you can look up scheduled programmes by genre like movies sports etc 6 To search for programmes by genre press OPTIONS and select Search by genre Select a genre and press OK A list with the found programmes appears 9 Sources 9 1 Sources list In the list of connections the Source menu you can find the devices connected to the TV From this Source menu you can switch to a device Sources menu To open the Sources menu press 2 SOURCES To switch to a connected device select the device with the arrows lt 4 left or gt right and press OK To close the Source menu without switching to a device press E SOURCES again 92 From standby With the TV in standby you can switch on a connected device with your TV remote control Play To switch on both disc player and TV from standby and start playing the disc or programme immediately press play on the TV remote control The device should be connected with an HDMI cable and both TV and device must have HDMI CEC switched on Home Theatre System You can switch on your Home Theatre System to listen to an audio disc or a radio channel and leave the TV in standby To only switch on the H
82. und the TV for ventilation Ensure curtains or other objects never cover the ventilation slots on the TV Lightning storms Disconnect the TV from the power outlet and antenna before lightning storms During lightning storms never touch any part of the TV power cord or antenna cable Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time Low temperatures If the TV is transported in temperatures below 5 C or 41 F unpack the TV and wait until the TV temperature reaches room temperature before connecting the TV to the power outlet Humidity In rare occasions depending on temperature and humidity minor condensation can occur on the inside of the TV glass front on some models To prevent this do not expose the TV to direct sunlight heat or extreme humidity If condensation occurs it will disappear spontaneously while the TV is playing for a few hours The condensation moisture will not harm the TV or cause malfunction 16 2 Screen care Never touch push rub or strike the screen with any object Unplug the TV before cleaning Clean the TV and frame with a soft damp cloth and wipe gently Never use substances such as alcohol chemicals or household cleaners on the TV To avoid deformations and colour fading wipe off water drops as quickly as possible Avoid stationary images as much as possible Stationary images are images that rema
83. ut cannot find a second one turn the dish a few degrees Align the dish to get the strongest signal on the first satellite Check the signal strength indicator of the first satellite on screen With the first satellite set at the strongest signal select Search again to find the second satellite Make sure the settings are set to Two satellites Changing the installation settings did not solve my problem All settings satellites and channels are only stored at the end of the installation when you finish All satellite channels are gone If you use a Unicable system make sure you assigned a unique user band number to the satellite receiver in the Unicable settings It might be that another satellite receiver is using the same user band number Some satellite channels seem to have disappeared from the channel list If some channels seem to be gone or displaced the broadcaster might have changed the transponder location of these channels To restore the channel positions in the channel list you can try an update of the channel package cannot remove a satellite Subscription packages do not allow removing a satellite To remove the satellite you have to do a complete installation again and select another package Sometimes the reception is poor Check if the satellite dish is solidly mounted Strong winds can move the dish Snow and rain can degrade the reception 28 TV guide
84. w adding a satellite The additional satellite should be seen as an extra it is not your main satellite subscription or not the main satellite of which you use its channel package Typically you would add a 4th satellite when you have 3 satellites already installed If you have 4 satellites installed you might consider removing one first to be able to add a new satellite Settings If you currently have only 1 or 2 satellites installed the current installation settings might not allow adding an extra satellite If you need to change the installation settings you must redo the complete satellite installation You cannot use Add satellite if a change of settings is needed To add a satellite 1 Press and select Setup and press OK 2 Select Search for satellite and press OK 3 Select Add satellite and press OK The current satellites are shown 4 Select Add and press OK The TV will search for new satellites 5 If the TV has found one or more satellites select Install and press OK The TV installs the channels of the found satellites 6 To store the channels and radio stations select Finish and press OK 26 Z 4 You can remove one or more satellites your current satellite installation You remove the satellit jd its channels Remove a satellite However some satellite operators do not allo moving a satellite de K To remove satellites 1 Press and select Setup and press O
85. y on the remote control during a 4 hour period or if the TV receives no input signal nor remote control commands for 10 minutes the TV switches off automatically to save energy If you use the TV as a monitor or use a digital receiver to watch TV a Set top box STB and you do not use the remote control of the TV you should deactivate the automatic switch off To deactivate the Auto switch off 1 Press and select Setup and press OK 2 Select TV settings gt General settings gt Auto switch off and set the slider bar to 0 Off 31 Y E My 3 Press gt repeatedly if necesstfagrto close the menu 11 Your photos videos and music 313 From a USB connection What you need You can view your photos or play your music and videos from a connected USB flash drive or USB Hard Drive From a USB device With the TV switched on plug in a USB flash drive or USB Hard Drive to one of the USB connections The TV detects the device and lists your files If the list does not appear automatically press amp SOURCES select Browse USB and press OK Menu bar With a USB device connected the TV sorts the files by type Navigate to the menu bar and select the type of file you are looking for If you browse files from a computer you can only browse the files and folders as they are organized on the computer The menu bar Navigate to the menu bar and select the type of file you want to watch or
86. y the TV Insert the USB memory into one of the USB connections of the TV Select Start and press OK An identification file is written on the USB memory device 3 Download the TV software Insert the USB memory into your computer On the USB memory device locate the file update htm and double click tt Click on Send ID If new software is available download the zip file After the download unzip the file and copy the file autorun upg onto the USB memory device Do not place this file in a folder 4 Update the TV software Insert the USB memory into the TV again The update starts automatically The TV switches itself off for 10 seconds and then back on again Please wait Do not use the remote control remove the USB memory device from the TV If a power cut occurs during the update never remove the USB memory device from the TV When the power returns the update will continue 43 O Z mo az 1 7 e Software version 4 To view the current TV software version Z7 1 Press and select Setup and press OK h 7 2 Select Software settings and press OK 9 3 Select Current software info and see Release versi 4 Press 2 repeatedly if necessary to close the menu T 14 3 Q Open source software This television contains open source software TP Vision Europe B V hereby offers to deliver upon request a copy of the complete corresp

Download Pdf Manuals

Related Search

Related Contents

Automatic generation of programmable logic device architectures  Mode d`emploi - Bronkhorst High  DANA Diabecare R  Bedienungsanleitung  Debugging Extension User`s Manual  Sharkoon Tauron Red Edition  Garmin 201 GPS Receiver User Manual  Konica 2230/2330  7"TFT LCD 12V OUTPUT TVI2.0/CVBS/HDMI/VGA INPUT 18650 Li    

Copyright © All rights reserved. Failed to retrieve file