USER MANUAL V 1.0 IND-100U
Contents
1. information along with a copy of your SALES RECEIPT a Name d Shipping Address g Serial Number b Email Address e Purchase Date h Model Number c Phone Number f Purchased From i Defective Issue 2 If determined that the item is warrantable Bravo View will issue a RA and provide an address to mail the unit back to 3 Bravo View is not responsible for articles lost or stolen during shipping IT IS ADVISABLE TO SHIP THE UNIT IN A METHOD IN WHICH YOU CAN TRACK THE PACKAGE AND POSSIBLY INSURE THE PACKAGE Bravo View does not cover the expense of mailing the unit back to us 4 Once Bravo View receives and validates the unit to ensure it is within warranty Bravo View will replace the unit fix the unit or offer a substitute of the unit if a replacement is not available Bravo View may send a refurbished unit back To obtain warranty service you must contact Bravo View Technology for a Return Authorization Number RA 909 869 0699 or visit www bravoview com PN 1270750045872. m gt gt Radio mode press to tune manually Long press to tune automatically USB mode press to goto previous track long press to fast reverse forward 6 SRC Select playback source 7 DISP Display switch long press to adjust time 8 FL Radio mode press to select previous preset station In manual tuning mode press to select a preset postion USB mode press to random play long press to enter previous folder 9 VOL MENU Adjust the volume level rotate Press to set sound effect Long press to enter setting menu Remote Controls Operating range Point the remote control unit to the remote sensor when you operate with it The remote control can operate within a distance of 3 5m Remote Sensor 30 f 30 Replacing the lithium battery of remote control unit When the range of the operation of the card remote control becomes short or no functions while operating Replace the battery with a new lithium battery Make sure the battery Polarity replacement is correct 1 Pull out the battery holder while pressing the stopper 2 Insert the button type battery with the stamped mark facing upward Insert the battery holder into the remote control a nat all T Dop Power on off Volume Mute Press to select VOL BAS TRE BAL FAD use volume button to adjust level Press and hold it to enter Menu mode Loudness FM stereo mono Disc Playback Button 1 Play Pause Top play long
3. play the selected song file MP3 Overview e MP3 is short for MPEG Audio Layer 3 and refers to an audio compression technology standard e This product allows playback of MP3 files on USB or SD MMC card e The unit can read MP3 files written in the format compliant with ISO 9660 However it does not support the MP3 data written by the method of packet write e The unit can not read an MP3 file that has a file extension other than mp3 e f you play a non MP3 file that has the mp3 extension you may hear some noise e In this manual we refer to what are called MP3 file and folder in PC terminology as Track and Album respectively e The unit may not play tracks in the order of track numbers e The unit plays only the audio tracks if contains both audio tracks and MP3 files Press and hold the VOL MENU knob more than 2 seconds to enter menu mode then each press changes the mode as follows DSP mode Rotate the knob to choose DSP sound effect POP gt ROCK gt CLASSIC gt FLAT gt DSP LOUD ON OFF Rotate the knob to choose loudness on or off BEEP ON OFF mode Rotate the knob to choose button beep sound on or off SEEK 1 2 mode in Radio mode Rotate the knob to choose radio seek mode 1 or 2 SEEK 1 Searching station will stop when the next station is received SEEK 2 Searching station will stop when lt lt or gt gt button is released and next station is re
4. NTFS format is not supported Due to different formats some models read of USB storage devices or MP3 players may not be read Specifications General Power supply Maximum power output Continuous power output Suitable speaker impedance Pre Amp output voltage Fuse Dimensions WxHxD Weight Aux in level FM Stereo Radio Frequency range Usable sensitivity Frequency response Stereo separation Image response ratio IF response ratio Signal noise ratio AM MW Radio Frequency range Usable sensitivity S N 20dB Components Mounting sleeve Machine screws M5x6 mm Wire connector Trim plate Removal key Operating Instructions Remote control unit Note 12VDC 11V 16V Test voltage 14 4V negative ground 45W x 4 channels 20W x 4 channels 4Q 10 T H D 4 80hm 4 0V Play mode 1KHz 0dB 10KQ load 15A 188 x 58 x 98mm 0 52kg 500mV 87 5 107 9MHz 8dBy 30Hz 15KHz 30dB 1KHz 50dB 70dB gt 55dB 530 1710KHz 30dBy lt Na J Specifications and the design are subject to change without notice due to improvements Limited Warranty Bravo View Technology warrants this product including any accessory and or cable against defects in material or workmanship as follows 1 Labor For a period of 1 Year from original date of purchase if the product is determined to be defective Bravo View will repair or replace the product at no charge 2 Parts Fora peri
5. SB SD MMC MP38 Playback 2 000000e 6 Playing MP3 WMA Fil S cccccseesseeeeeeees 7 Menu FUNCUHON icsciiccncssaesceasssncssiencsperccuanuncnarsne 7 Device CONNECTIONS ceeceeeeeeeeeeeeeeeeeseees 8 Installation GUICE ccccceseeeeeeeeeeeseeeeeeeeeens 9 TOUBIGS NO OUING vsecccede cece xtrevetececestecetaveccesszee 12 Specifications sasncsinicantcecsnsientbedvditeniedeinetenawecayn 13 Panel Controls Power ON Press MUTE button to turn on the unit O MUTE FL lt lt gt gt AMS INT VOL MENU BAND PLAY RESET Hole SD MMC Card Slot USB Connector SRC DISP FL AUX IN Jack 1 MUTE Press to POWER on When on press to MUTE Long press to POWER off 2 BAND PLAY Radio mode press to switch BAND In manual tuning mode long press to store station USB mode press to play pause long press to back to the first track 3 FL Radio mode press to select next preset station In manual tuning mode press to select a preset postion USB mode press to select repeat play long press to enter next folder 4 AMS INT Radio mode scan preset stations long press to search and store strongest stations in the memory automatically USB mode press to intro play Long press to enter TRACK NUM SEARCH 5
6. ceived STERE MONO mode in Radio mode Rotate the knob to choose FM stereo or mono LOCAL DX in Radio mode Rotate the knob to choose Radio local or distant VOL mode Rotate the knob to choose volume last adjust mode V LAST The turn on volume level is the volume of latest power off V ADJ Press the knob to enter Volume Adjust mode rotate the knob to set the turn on volume level 12 24 HOURS mode Rotate the knob to choose time format 12H or 24 H Device Connections Wiring Diagram ee Fuse 15A Connector R Red L White Reart line out aa gt ISO Connector 4 For some VW Audi or Opel Vauxhall car models you may need to modify wiring of the supplied power cord as illustrate or else the memory of the unit may be lost after you power of Contact your authorized car dealer before installing this unit Original wiring Modified wiring rear ight 2 Pure Pp Rear Right Purple with Black Stripe _ Po Front Right Gray ANTAMP contro ee Front Left White with white stripe Front Left White with Black Stripe 7 ACC Red Rear Left Green Ground Black Rear Left Green with Black Stripe Device Connections continuous Notes of connection To avoid short circuit in the electrical system ensure that the negative battery cable is disconnected before installation To prevent short circuit in the wiring and damaging to this
7. esired time 4 Press DISP to confirm USB SD MMC MP3 Playback Tuner Operation Band During radio play press the BAND PLAY button to choose between three FM and two AM bands Up Tuning Press the seek up button to tune stations upward step by step The current frequency will be shown in digital format on the display panel Press and hold the seek button to the next available station Down Tuning Press the seek down lt button to tune stations downward step by step Press and hold the seek down lt button to the previous available station Manual store When one expected radio station has been detected press and hold the BAND button then press the FL or FL button to select a preset position press the knob to confirm The unit can store 6 stations in each band Auto Store Press the AMS INT button to scan preset stations 1 6 Hold it to automatically select six strong stations and store them in the current band The new stations replace stations already stored in that band Recall the stored stations To recall the preset station press FL or FL repeatedly 1 Load SD MMC Card Insert the SD MMC card into the slot with the front side at top The unit will show CARD and read the card automatically Take out SD MMC Card Press SRC button and switch to non CARD mode take out the card Load USB Equipment Insert the USB into the connec
8. f the operation of this unit graphic illustration was used However this illustration is not necessary printed as the actual image found on the unit Features WMA and MP3 Compatibility It is possible to playback WMA and MP3 files About WMA The unit can playback WMA data Windows Media and the Windows logo are trade marks or registered trademarks of Microsoft Corporation in the United States and or other countries This unit may not operate correctly depending on the application used to encode WMA files About MP3 Supply of this product only conveys a license for private non commercial use and does not convey a license nor imply any right to use this product in any commercial i e revenue generating realtime broadcasting terrestrial satellite cable and or any other media broad casting streaming via internet intranets and or other networks or in other electronic content distribution systems such as pay audio or audio on demand applications An independent license for such use is required For details please visit http www mp3licensing com Contents Safety Precautions ccccccessseeeeeeeeseeeeeeees 1 FS Meee icone essences uv eunceie aaa 2 Panel CONMONS sisi dicta ccsnnennssuuatsedavncuthuetadevesuedis 3 Remote Controls xiveceiveaseueesenencasawntiindadeecsiusiiays 4 General Operation ccccccceceesseseeeeeeeeeeeans 5 Tuner Operation ceececeeceesseeeeeseeseeeeeeeeeees 6 U
9. lume level to cancle MUTE mode Audio Controls To adjust the bass treble balance and fader press the VOL MENU knob repeatedly until the appropriate audio control appears on the display panel Within five seconds rotate the knob to adjust the audio settings for the selected function Mode Button SRC Press the SRC button repeatedly to change following mode Radio USB when USB is connected Card when SD MMC card is in AUX play etc Auxiliary Input To access an auxiliary device 1 Connect the portable audio player to the AUX interface on the front panel 2 Press the SRC button to select AUX mode 3 To cancel AUX mode press SRC again Display Selector DISP This unit can display the clock time radio frequenc Ordinarily the radio frequency or MP3 WMA track indication is displayed but the unit will display the time when the DISP button is pressed The time will display for approximately 5 seconds then return to previous mode Setting the Clock The correct time of day can be set by pressing and holding the DISP button To set the clock perform the following steps 1 Press the DISP button to view the clock 2 With the clock visible on the display press and hold the DISP button until the time display flashes 3 Within 5 seconds rotate the knob counter clockwise to adjust the minutes to the desired setting To change the hour rotate the knob clockwise to adjust the hour to the d
10. od of 1 Year from original date of purchase Bravo View will at no charge replace with new or rebuilt parts in exchange for defective parts The warranty will either continue from date of original purchase or 90 days from repair Whichever is longer This warranty does not cover customer misuse improper installation poor signal including any noise cosmetic damage damage due by accident abuse negligence commercial use and improper operation Proof of Purchase in the form of a copy of a bill of sale or copy of receipted invoice which shows clearly the sale of the unit is required Repair or Replacement as provided under this warranty is the exclusive remedy of the consumer Bravo View Technology shall not be liable for any incidental or consequential damage for breach of any express or implied warranty on this product In no event shall Bravo View Technology be liable for any incidental or consequential damage whatsoever arising out of the use or inability to use the product Under no circumstance shall Bravo View Technology s liability exceed the purchase price paid for the product Except to the extent prohibited by applicable law any implied warranty or merchantability or fitness for a particular purpose on this product is limited in duration to the duration of this warranty Warranty Request 1 Send an email or write to our customer service department customer bravoview com please provide the following
11. ol Thank You for purchasing the IND 100U 1 DIN DIGITAL MEDIA RECEIVER IND 100U NA NA WAN NA LOUD 3 AM AN BB sTo 123 USER MANUAL V 1 0 Bravo View Technology 20153 Paseo Del Prado Walnut CA 91789 United States of America 909 869 0699 www bravoview com Safety Precautions Thank you for purchasing this product Please read through these operating instructions so you will know how to operate your model properly After you have finished reading the instructions keep this manual in a safe place for future reference Only connect the unit to a 12 volt power supply with negative grounding Never install this unit where the operation amp condition for safety driving is restrained Never expose this unit amplifier and speakers to moisture or water for preventing electric sparks or fires Please don t change the fuse on the power cord without professional guidance using improper fuse may cause damage to this unit or even cause fire To ensure safe driving please adjust the volume to a safe amp comfort level in case of emergency situations Please power off this unit at once and send it back to the after sales service center or the dealer distributor you purchased from if one of the following symptoms is found a Water or other obstacle enters the unit b Smoking c Peculiar smell To provide a clear demonstration and an alternative for easy understanding o
12. pe of installation 1 Remove the existing factory radio from the dashboard or center console mounting Save all hardware and brackets as they will be used to mount the new radio 2 Carefully unsnap the plastic frame from the front of the new unit chassis Remove and discard the frame 3 Remove the factory mounting brackets and hardware from the existing unit and attach them to the new unit Please use the attached screws Unsuitable screws may damage components inside the chassis 4 Wire the new unit as outlined in the Mounting Sleeve Installation instructions 5 Mount the new unit assembly to the dashboard or center console using the reverse procedure of step 1 Q Mounting sleeve 2 The unit Trim plate Installation Guide continuous Reset h o C RESET RESET Hole The RESET button is located the bottom of the front panel Resetting the unit will erase the time and preset memories It should only be activated upon initial installation after all wiring is complete or if there is a malfunction of any of the switches on the unit Fuse When replacing a fuse make sure the new fuse is the correct type and amperage Using an incorrect fuse could damage the radio Reconnect Battery When wiring is complete reconnect the battery negative terminal Removing the Unit 1 Remove the trim plate 2 Insert the removal keys straight back until they lock 3 Pull the radio out If the removal key
13. press Button 2 Intro play 10 sec Button 3 Track repeat play Button 4 Track random play Button 5 MP3 folder down Button 6 MP3 folder up Radio Preset Press to listen to a preset station Press and hold to store station Radio tune Track seek Select playback source AMS Radio preset scan Radio auto preset SEARCH MP3 track search 1 Band switch 12 Radio local distant 13 Display switch WARNING e Store the battery in place where children cannot reach If a child accidentally swallowed the battery consult a doctor immediately e Do not recharge short disassemble or heat the battery or dispose it in a fire Doing this may cause the battery to give off heat crack or start a fire e Do not leave the battery with other metallic materials or poke the battery with tweezers or similar tools e When throwing away or saving the battery wrap it in tape and insulate General Operation Power On Off Button Press the MUTE button to turn the unit on when the vehicle ignition switch is on Press and hold the button to turn the unit off Adjust Volume level Rotate the VOL MENU knob to adjust volume level Rotate it clockwise to increase and anticlockwise to decrease the volume Audio Mute Press the MUTE button to mute the volume from the system MUTE will appear on the display panel and the volume will be muted Press the MUTE button again or adjust the vo
14. s are inserted at an angle they will not lock properly and will not release the unit Troubleshooting If you suspect something is wrong immediately switch power off Immediately stop using it and call the store where you purchased it Never try to repair the unit yourself because it is dangerous to do so Car ignition is not on Turn your car key in the ignition The unit will not switch Cable is not properly Check cable connection connected Replace fuse with a new fuse of the Fuse is burnt same capacity Volume is set at minimum or Check the volume or switch the mute No sound Ba the mute function is on function off me Halt Of CEET COES The unit system is unstable Press the RESET button not function normally TUNER mode Unable to receive The antenna is not connected Connect the antenna properly stations properly Poor quality reception of The antenna is not fully Fully extend the antenna and if radio station extended or it is broken broken replace it with a new one Connect the permanent live on the unit to the permanent live on the vehicle The battery cable is not Preset stations are lost properly connected USB SD MMC mode The memory card or USB device has been inserted the Insert it the other way around wrong way round Unable to insert USB device or SD MMC card Check that the USB SD MMC file The USB device or SD system is in FAT or FAT32 format MMC card cannot be
15. shboard opening so the wiring can be brought through the mounting sleeve Follow the wiring diagram carefully and make certain all connections are secure and insulated with wire nuts or electrical tape After completing the wiring connections turn the unit on to confirm operation vehicle ignition must be on If the unit does not operate re check all wiring until the problem is corrected 5 Make sure the radio is right side up then carefully slide the radio into the mounting sleeve until it is fully seated and the spring clips lock it into place 6 Secure the rear of the unit to the car body using the mounting bolt and rubber cushion 7 Test the unit using the Operation instructions that follow Kit Installation If your vehicle requires the use of an installation kit to mount this unit follow the instructions included with the installation kit to attach the unit to the mounting plate supplied with the kit 1 Wire and test the unit as outlined in the Mounting Sleeve Installation instructions 2 Install the radio mounting plate assembly to the sub dashboard according to the instructions in the installation kit 3 Replace the dashboard trim panel ISO Installation This unit has threaded holes in the chassis side panels which may be used with the original factory mounting brackets of some vehicles to mount the radio to the dashboard Please consult with your local car stereo shop for assistance on this ty
16. tor and the unit will read the USB storer automatically Take out USB Equipment Press SRC button and switch to non USB mode then take off the USB stick USB SD MMC Notes USB functions flash memory type MP3 music play 1 SD MMC card support 2 USB flash memory 2 in 1 SD MMC support 3 FAT 12 FAT 16 FAT 32 is possible 4 Tag id3 tag ver 2 0 Title artist aloum 32 byte support 5 Multi card reader not support 6 USB 1 1 support USB 2 0 support It can not support USB 2 0 speed Just get the same speed with USB 1 1 Note Not all USB devices are compatible with the unit Menu Function Playing MP3 WMA Files Display Information During playback ID3 tag information display scrolling on the screen FOLDER FILE ALBUM TITLE ARTIST and Track Number Elapsed Time Repeat Playback 1 Long press the FL button to select RPT ONE Repeat play current track RPT FOLD Repeat play current folder RPT ALL Repeat play all the tracks RPT OFF Cancel repeat playback Direct Song File Access 1 Press and hold the AMS INT button to enable direct track searching 2 Press the VOL MENU knob to confirm 3 Rotate the knob to select a number 5 Repeat steps 2 3 to enter the other digits if necessary NOTE The unit will only allow the selection of digits that correspond with the number of files on the media you are searching 6 Once the track number appears on the screen long press the knob to
17. ttery negative terminal Note If the unit is to be installed in a car equipped with an on board drive or navigation computer do not disconnect the battery cable If the cable is disconnected the computer memory may be lost Under these conditions use extra caution during installation to avoid causing a short circuit 2 Remove unit from sleeve Lift latches on both sides of sleeve to remove half sleeve from the unit Mounting Sleeve Installation 1 Slide the mounting sleeve off the chassis If it is locked into position use the removal tools Supplied to disengage it 2 Check the dashboard opening size by sliding the mounting sleeve into it Ci lt lt 183mm If the opening is too small carefully cut or file as necessary until the sleeve easily slides into the opening Do not force the sleeve into the opening or cause it to bend or bow Check for sufficient space behind the dashboard for the unit chassis This unit can be installed in any dashboard with a suitable 183 mm W x 52 mm H opening as shown above The dashboard should be 4 75 mm 5 56 mm thick in order to be able to support the unit 3 Locate the series of bend tabs along the top bottom and sides of the mounting sleeve With the sleeve fully inserted into the dashboard opening bend as many of the tabs outward as necessary to firmly secure the sleeve to the dashboard Installation Guide continuous 4 Place the unit in front of the da
18. unit secure all wirings with cable clamp or adhesive tape Route the wirings in a secured out of heating place without touching any moving parts such as gear shift handbrake and seat rails to prevent the wiring insulation being melted wore off Never pass the yellow power cord through the installation hole into the engine compartment and connect to the car battery Otherwise a high possibility of serious short circuit to the electrical system may be occurred Replacing a new fuse with 15A rating when the old one is broken using no fuse or fuse with improper rating may cause damage to this unit or even fires If a proper fuse is installed and electrical problems still occur please contact with any professional car shops for inquiry DO NOT connect other equipments with the car battery to avoid battery overheating Please make sure all the wiring connections amp the cables of the Speakers are well insulated Otherwise this unit may be damaged by short circuit If there is no ACC available please connect ACC lead to the power supply with a switch If an external power amplifier is connected please don t connect P CONT lead to the power lead of the external power amplifier otherwise electric spark or other damage may be resulted Never ground the speaker output to prevent the damage to the built in power amplifier Installation Guide Preparation 1 Disconnect battery Before you begin always disconnect the ba
Download Pdf Manuals
Related Search