6900 Time Tracker Inst. GUD RVM
Contents
1. LEARNING RESOURCES awhole newyd manade time LEARNING LER 6900 RESOURCES 5 INSERT BATTERIES GETTING SET CLOCK 6 SET MANUAL TIMER SET AUTO TIMER 22222 STARTING THE TIMER PAUSING THE TIMER STOPPING THE TIMER CHECK TIME REMAINING INEACH SECTION USING AN ADAPTER USE AND CARE INSTRUCTIONS REPLACING BATTERIES TO REPLACE BACK UP BATTERIES IMPORTANT BATTERY INFORMATION IMPORTANT BATTERY INFORMATION Please read and understand these additional battery usage instructions To ensure proper function Battery installation and replacement should be done by an adult only Do not mix old and new batteries Do not mix alkaline standard or rechargeable batteries Non rechargeable batteries are not to be recharged Rechargeable batteries are to be removed from the product before being charged if removable Rechargeable batteries are only to be charged under adult supervision if removable Only batteries of the same or equivalent type as recommended are to be used Batteries are to be inserted with the correct polarity Exhauste2. MANUAL Program exactly how long you want each color section Red Section Yellow Section to stay lit AUTO Program the i Speaker Green Section total amount of time behind and the color sections Display will automatically be Volume Control MMM divided into 80 green 15 yellow and 5 red For example if you program 10 minutes Adapter outlet as your total time the green section will stay lit Right Arow tenu Stat for 8 minutes the yellow section for 1 minute 30 seconds and the red section for 30 seconds Reset Key Left Arrow Battery Compartment underneath The Time Tracker has six different sound effects You may program a sound effect to be used before one two or all three of the colored sections The sound effects are Begin Siren Buzzer Bell Ticking Clock Time s Up Before setting the time please note 1 If you do not press any key for 20 seconds the unit will exit the programming mode 2 Press MENU at any time to go back to the previous step 3 Once you have set the Manual and or Auto timer those times will remain programmed in the unit until you change them Once programmed you can go directly to START TIMER SET CLOCK 1 Press and hold START and ENTER buttons at the same time for 3 seconds SET CLOCK Press ENTER 12H 24H choose 12hr or 24 hr Use to move curser Press ENTER to accept
3. Set time Use P buttons to scroll through numbers P hrs min sec and ENTER to accept AM PM Use buttons to move curser and ENTER to accept Press MENU or continue to the set manual and or auto timer next using the buttons SET MANUAL TIMER 1 Press and hold START and ENTER buttons at the same time for 3 seconds 2 Press P buttons until SET MANUAL appears on display 3 Press ENTER 4 Section Green Enter amount of time hrs min sec the green section will lit Use buttons to scroll through numbers and ENTER to accept 5 Sound Do you want a sound effect at the start of the green section 6 Yes No Use buttons to move cursor and ENTER to accept 7 If yes use buttons to scroll through sounds and ENTER to accept 8 Repeat for the yellow and red sections 9 You may continue to SET AUTO or skip to STARTING THE TIME
4. time tests practice sessions study sessions experiments phone calls speeches or any timed activity INSERT BATTERIES You will need 4 AA batteries Phillips screwdriver 4 Turn the Time Tracker over Use the Phillips screwdriver to turn the screw on the battery door in a counterclockwise direction to loosen the screw Remove the screw and open the door Pull the clear tab sticking out of the backup battery compartment to activate backup batteries Insert the four AA batteries being careful to match the ends of the batteries to the diagram inside the battery compartment Replace the battery compartment door and insert the screw Tighten the screw by using the Phillips screwdriver to turn the screw in a clockwise direction until secure Do not over tighten the screw PAUSING THE TIMER 1 Press both buttons at the same time to PAUSE 2 Press the START to resume STOPPING THE TIMER 1 Press and hold the MENU button to stop the timer CHECK TIME REMAINING IN EACH SECTION 1 Press START to display how much time is remaining in the lit section 2 Press START again to display total time remaining RESET BUTTON If the unit begins to behave in an erratic manner use the end of a paper clip or similar small object to push the reset button located in the small hole above the adapter jack USING AN ADAPTER Important Note When using an adapter with the unit unplug the ada
5. d batteries are to be removed from the product Remove batteries if product is to be inactive for long periods of time to avoid leakage The supply terminals are not to be short circuited Replace batteries at the first signs of erratic operation WARNING DO NOT DISPOSE OF BATTERIES IN FIRE BATTERIES MAY EXPLODE OR LEAK IMPORTANT INFORMATION 6 MAX 6V D C 300 toy is not intended for children under 3 years old 0O toy must only be used with the recommended transformer 0 toy transformer is not toy 0 Disconnect toy from transformer before cleaning the toy with liquid Transfomers used with the toy are to be regularly examined for damage Lito the chord plug enclosure and other parts and that the event of such the toys must not be used with this transformer until the damage C been repaired he F ai Use and Care Instructions Y To protect your Time Tracker Visual Timer Y Do submerge the unit in water Y Prevent spilling food or beverages on the unit Y clean wipe gently with a barely damp soft cloth Y Do not throw the unit and do not push sharp objects through the speaker holes or LCD display screen Replacing Batteries Change the batteries when the sound becomes garbled or slows down or when pressing a button does not trigger a response from the unit You will also need to r
6. eplace the 2 LR44 back up batteries from time to time These batteries maintain your clock and time settings should the regular batteries lose power and or when you are replacing the regular batteries To replace back up batteries The back up battery compartment is located inside the battery compartment under the AA batteries Use a small Phillips screwdriver to turn the screw on the battery door ina counterclockwise direction to loosen screw Remove the screw and open the door Remove the 2 LR44 batteries Insert two new LR44 batteries being careful to match the and ends of the batteries to the diagram inside the battery compartment Replace the battery compartment door and insert the screw Tighten the screw by using a small Phillips screwdriver to turn the screw in a clockwise direction until secure Do not over tighten the screw VISUAL TIMER CLOCK The Time Tracker Visual Timer and clock helps manage time in a new way Bright long lasting lights give visual cues as to the amount of time remaining to complete a task The Time Tracker is divided into three lighted sections each representing a portion of time You can program exactly how long each of the sections remains lit or you can select the automatic setting and the Time Tracker will divide the time for you For added emphasis you can add a sound effect to play each time a section changes colors choose from six different sound effects Use the Time Tracker to
7. pter from the unit first before unplugging the adapter from the wall Unplugging the adapter from the wall before you unplug it from the unit will reset the unit and your programming will be lost 1 Plug the adapter into the jack located on the right side of the unit 2 Plug the adapter into the wall The power adapter Model No LER2901 can be ordered from Learning Resources by calling 1 888 489 9388 or through online at www learningresources com SET AUTO TIMER 1 Press and hold START and ENTER buttons at the same time for 3 seconds 2 Press P buttons until SET AUTO appears on the display 3 Press ENTER 4 Total Time Enter the total amount of time It will automatically split between green yellow and red lights Use buttons to scroll through numbers and ENTER to accept 5 Sound Do you want a sound effect at the start of the green light 6 Yes No Use buttons to move cursor and ENTER to accept 7 If yes use P buttons to scroll through sounds and ENTER to accept 8 Repeat steps 7 and 8 for yellow and red sections 9 Press MENU STARTING THE TIMER 1 After you set Manual and or Auto time press MENU the display will show CLOCK 2 Use P buttons to choose MANUAL TIMER or AUTO TIMER and ENTER to accept 3 Press the START button to start the timer GETTING STARTED The Time Tracker has 3 modes CLOCK Regular digital clock
Download Pdf Manuals
Related Search