ISO Test Report - Stellar
Contents
1. NovitaTech Engineering TEST REPORT FOR PDG Product Design Group Stellar Tilt MANUAL WHEELCHAIR TEST DOCUMENTS AS3695 1992 AS3696 1 1990 AS 3696 3 1990 AS 3696 5 1989 AS 3696 8 1998 ISO 7176 7 1996 LABORATORY REFERENCE 94 March 2005 Z NATA Accredited Laboratory No 2953 Ri NATA endorsed test report Page 1 of 12 This document shall not be reproduced except in full ye NovitaTech Engineering novitatech regency park TEST REPORT This report may NOT be reproduced in part without written laboratory authorisation The NovitaTech Engineering Testing Laboratory has no control over the selection of test samples Any extension of the findings of this report to cover production items must be based on the production being truly represented by the sample s Job no 490870 PRODUCT Name and Model No PDG Product Design Group Stellar Tilt 18 Seat Width Serial no s of test sample 16200 Maximum user mass 100 kg Documents used in testing AS3695 1992 AS3696 1 1990 AS 3696 3 1990 AS 3696 5 1989 AS 3696 8 1998 ISO 7176 7 1996 SUPPLIER Name Product Design Group Inc Address 102 366 E Kent Ave S Vancouver British Columbia Canada V5X 4N6 Telephone Fax 604 323 9220 604 323 9097 Contact person Phil Mundy Order No 16619D Order Date 07 12 2004 TESTING AUTHORITY NovitaTech NovitaTech Engineering Days Rd Regency Park South Australia S A 5010 Telephone 08 8243 8262 08 8242. a to be used A description of the intended user including but not limited to maximum weight Yes 9 3 4 b NATA Accredited Laboratory No 2953 NATA endorsed test report This document shall not be reproduced except in full N Page 10 of 12 Tester s Initials A S B S AS 3695 WHEELCHAIRS STANDARD TEST FORM Job Number 490870 AS3695 1992 Clauses 8 and 9 MARKING AND INFORMATIVE LABELLING CONT Requirements Result of Reference in verification AS3695 The environment in which the wheelchair is intended to be used and a description of any environmental conditions such as temperature and humidity that might be Yes 9 3 4 c harmful to the wheelchair A complete list of all accessories and tools that are supplied with the wheelchair NA 9 3 4 d If a wheelchair or accessory is marketed as user installed or assembled then the 53s user s manual for that wheelchair includes the following information A list of components Yes 9 3 5 a ipiomaton about any tools or equipment needed to assemble the wheelchair and its ves 9 3 5 b accessories Instructions for assembling installing and removing any accessories supplied by the Vas 9 3 5 c manufacturer Instructions on how to prepare the wheelchair for storage shipment or travel Yes 9 3 5 d The following information required for operating the wheelchair is included in the ae user
3. s manual Complete operating instructions including instructions for operation of the wheelchair on surfaces likely to be encountered by the user supplemented by appropriate Yes 9 3 6 a illustrations e g depicting the wheelchair on ramps steep terrain kerbs or steps Any common misuse of the wheelchair known by the manufacturer that might lead to Weed 9 3 6 b personal injury or damage to the wheelchair The following information concerning maintenance of a wheelchair is included in the 937 user s manual for that wheelchair Regular maintenance instructions accompanied by annotated illustrations including 9 3 7 a Any service maintenance and fault finding that the manufacturer intends the user to yes 9 3 7 a i do Information about the types of tools or equipment needed to repair and service the ves 9 3 7 a i wheelchair and its accessories Frequency of maintenance Yes 9 3 7 a iii A list of materials necessary including part numbers and procurement information NA 9 3 7 a iv Identification of circumstances in which the complete wheelchair should be returned ye 9 3 7 a v to the manufacturer distributor or service agent for maintenance Instructions on methods of cleaning Yes 9 3 7 b A list of parts that are intended by the manufacturer to be readily replaced e g T with a penis edly Instructions for ee petal a Yes 9 3 7 c placement and testing of these parts are accompanied by annotated illustrations o the part and its lo
4. 3 8232 fax 08 8243 8208 Testing supervisor Alex Svistounov Signature NATA signatory Checked Ben Symonds Signature NATA signatory Dates of testing period December 2004 Date of issue of this report 04 March 2005 January 2005_ Z NATA Accredited Laboratory No 2953 NN NATA endorsed test report Page 2 of 12 This document shall not be reproduced except in full AS 3695 WHEELCHAIRS STANDARD TEST FORM Job Number 490870 AS3695 1992 AS3696 1 1990 DETERMINATION OF STATIC STABILITY MARKING AND LABELLING Stability limits before Stability action if any to Specification Reference in Reference in Test limits prevent sliding according to clause of clause of Max Min description of action AS3695 AS3695 AS3696 1 Max Min Stability facing up slope Loe gt 15 0 NA gt 10 6 1 7 1 brakes on Stability facing down slope Slides 12 2 slides gt 15 gt 15 gt 10 6 1 7 1 brakes on 8 5 without bars Stability facing up slope laa 1p NA gt 10 6 1 7 2 brakes off Stability across slope is 15 NA gt 10 6 1 7 3 brakes on Stability in other critical aa NA NA gt 10 6 1 7 4 directions Performance Requirements AS3695 Clauses 6 1 8 1 f 8 1 h The chair was tested with a carry bag loaded to the maximum stated weight if supplied NA with the chair or hooks or the like are provided The wheelchair sh
5. 992 ISO 7176 7 1996 SEATING AND WHEEL DIMENSIONS CLAUSE 4 6 DIMENSIONS Dimensions Clause 4 6 of ISO DIS 7176 7 Reference Reference Measured Measured dimension dimension in Dimension values Dimension values in ISO DIS ISO DIS Min Max Min Max 7176 7 7176 7 Seat plane angle ta 1 effective seat depth mm 475 2 Max seat width mm 450 3 effective seat width mm 595 4 Seat surface height front 455 5 backrest angle 10 6 edge mm Backrest height mm 552 7 backrest width mm 410 8 Headrest in front of headrest height above na 9 na 10 backrest mm seat mm Footrest to seat mm 407 11 footrest clearance mm 57 12 Footrest length mm 152 13 footrest to leg angle 105 14 Leg to seat surface angle 110 15 armrest height mm 270 16 Front of armrest to backrest 450 17 armrest length mm 335 18 mm Armrest width mm 50 19 armrest angle 2 20 Distance between armrests front location of armrest 447 21 370 450 22 mm structure mm propelling wheel Handrim diameter mm 520 23 612 24 diameter mm Horizontal location of axle vertical location of wheel 60 25 115 26 mm axle mm The size of RLG Adult Remarks None End of remarks NATA Accredited Laboratory No 2953 Page 6 of 12 Re NATA endorsed test report This document shall not be reproduced except in full Tester s Initials A S B S AS 3695 WHEELCHAIRS STANDAR
6. D TEST FORM Job Number 490870 AS3695 1992 AS3696 8 1998 STATIC IMPACT AND FATIGUE TESTS List of failures AS3695 Clause 6 4 Mode Failure description a Components of the wheelchair are fractured or have visible cracks except cracks in surface finishes b Any nut bolt screw locking pin adjustable component or similar item become detached after having been tightened adjusted or refitted once Footrests may be adjusted after each of the two footrest impact tests d Parts intended to be removable folding or adjustable do not operate as described by the manufacturer Handgrips are displaced g Any multiposition or adjustable component is displaced from the present position except as permitted in b h Deformation free play or loss of adjustment of any component or assembly that adversely affects the function of the wheelchair Specification according to Mode of failure Actual force a table of AS3696 8 see list of Reference in Test method for static strength N Force for 100kg failures above AS3696 8 Table user mass N Armrest resistance to downward 760 2 760 none 8 4 forces NO DUMMY Footrest resistance to downward 1000 3 1000 none 8 5 forces NO DUMMY Tipping levers downwards load 1000 4 1000 none 8 6 DUMMY FITTED Handgrips DUMMY FITTED NA 5 750 NA 8 7 Armrests resistance to upward 895 6 895 none 8 8 for
7. RMATIVE LABELLING Result of Reference in Requirements verification AS3695 The following information is plainly marked in a permanent manner on the sample 8 1 The registered trade name or trademark of the manufacturer Yes 8 1 a The name and address of the Australian distributor or a space allocated for the y 8 1 b es name and address of the Australian distributor are marked on the wheelchair The model designation and serial number of the wheelchair Yes 8 1 c Any appropriate cautions and warnings Yes 8 1 d Recommended maximum weight of the user Yes 8 1 e If a carry bag is supplied with the wheelchair or hooks or the like are provided for a BM NA 8 1 h carry bag a statement giving the maximum load to be carried Tyres if pneumatic are marked with the size and recommended inflation pressure in y ae es kPa The following information is available to the purchaser and is printed in English 9 1 Specification information for the wheelchair including 9 1 a The model designation or any other information that will uniquely identify the r Yes 9 1 a i wheelchair The mass of the test dummy or human equivalent if used Yes 9 1 a ii The information on the performance attributes of the test wheelchair i e test results of static stability tests AS 3696 1 determination of the efficiency of brakes tests Yes 9 1 a iii AS3696 3 and static impa
8. all be permanently marked Yes The wheelchair is permanently marked Yes CAUTION Limited stability wheelchair Tips on a slope of less than 10 Remarks Artwork of permanent labelling was provided End of remarks The sample submitted for this test satisfies the relevant requirements of AS3696 1 1990 and AS3695 1992 except the methods indicated in this Yes report as not tested and or tested with deviations for user mass 100 kg NATA Accredited Laboratory No 2953 Page 3 of 12 Re NATA endorsed test report This document shall not be reproduced except in full Tester s Initials A S B S AS 3695 WHEELCHAIRS STANDARD TEST FORM Job Number 490870 AS3695 1992 AS3696 3 1990 DETERMINATION OF BRAKE EFFICIENCY PARKING BRAKE TEST Measured Type of failure Specification Reference Reference in Test critical brake failure according to in clause of clause of value skidding or tipping AS3695 AS3695 AS3696 3 Parking brakes facing down slope 12 Sliding gt 10 6 3 1 7 1 1 Parking brakes facing up slope 15 Tipping gt 10 6 3 1 7 1 2 Force to apply brakes 55N 7 1 4 Remarks None End of remarks The sample submitted for this test satisfies the relevant requirements of AS3696 3 1990 and AS3695 1992 except the methods indicated in this Yes report as not tested and or tested with deviations for user mass 100 k
9. cation in the wheelchair A description of potentially hazardous maintenance operations such as tyre inflation Yes 9 3 7 d Performance check instructions for carrying out any necessary performance checks Yes 938 intended by a manufacturer on a wheelchair are included in the user s manual Proper procedures for having a wheelchair repaired are described in the user s 93 9 manual and include at least the following Identification of parts that are intended to be repaired by the user Yes 9 3 9 a Identification of parts to be serviced by the manufacturer or an authorized service facility in order to maintain the serviceability of the wheelchair Yes 9 3 9 b Z NATA Accredited Laboratory No 2953 N NATA endorsed test report This document shall not be reproduced except in full Page 11 of 12 Tester s Initials A S B S AS 3695 WHEELCHAIRS STANDARD TEST FORM s r Job Number 490870 novitatech AS3695 1992 Clauses 8 and 9 MARKING AND INFORMATIVE LABELLING CONT Identification of any parts that can be removed and sent to the NA 939 manufacturer distributor or other party for repair 3 9 c Identification of circumstances in which the complete wheelchair should be returned oe Yes 9 3 9 d to the manufacturer distributor or service agent for repair A list of authorized service facilities Yes 9 3 9 e Information on whether replacement units are available Yes 9 3 9 f Packing and ship
10. ces DUMMY FITTED Footrest resistance to upward 440 7 440 each none 8 9 forces DUMMY FITTED Push handle resistance to upward 1760 8 880 each none 8 10 load DUMMY FITTED Remarks None End of remarks Page 7 of 12 Z NATA Accredited Laboratory No 2953 N NATA endorsed test report This document shall not be reproduced except in full Tester s Initials A S B S AS 3695 WHEELCHAIRS STANDARD TEST FORM Job Number 490870 Test method for impact strength Mode of failure see list of Reference in failures above AS3696 8 Backrest resistance to impact DUMMY THIGHS ONLY none 9 3 FITTED Handrim resistance to impact DUMMY FITTED none 9 4 Castors DUMMY FITTED none 9 5 Footrests resistance to lateral impact DUMMY FITTED none 9 6 3 Footrests resistance to longitudinal impact DUMMY FITTED none 9 6 4 Front structure resistance to frontal impact DUMMY FITTED none 9 7 2 Front structure resistance to offset impact DUMMY FITTED NA 9 7 3 Remarks None End of remarks Specification Mode of failure Actual number of according to a table Reference in Test method for fatigue strength see list of cycles of AS3696 8 AS3696 8 failures above number of cycles Two drum test 200 000 200 000 none 10 4 Drop test 6 666 6 666 none 10 5 Remarks None End of remarks The sample submitted fo
11. ct and fatigue tests AS3696 8 dimensional attributes of the wheelchair AS3696 5 and ISO7176 7 A statement as to which features and options are included in a specific wheelchair Yes 9 1 b A description of the intended user including but not limited to maximum Yes 9 1 c recommended weight Details of the warranty or where no warranty is provided a clear statement to that Yes 9 1 d effect Information on how to get repairs and service Yes 9 1 e Information as to whether a service manual is available Yes 9 1 f Additional information is available on request i e in addition to the minimum information contained in the specification sheets the manufacturer or importer Yes 9 2 makes available on request all information resulting from testing to this Standard At least one copy of the user s manual is supplied with each wheelchair sold Yes 9 3 1 When illustrations show components that are referred to in the text of the user s manual these components are numbered or named for positive identification Yes 9 3 2 illustrations are numbered or named for positive identification Warranty statements are included as part of the user s manual Yes 9 3 3 The following information concerning the general characteristics of the wheelchair is Baa included in the user s manual B A physical description of the wheelchair accompanied by photographs or drawings of the wheelchair and a non technical description of how the wheelchair is intended Yes 9 3 4
12. g NATA Accredited Laboratory No 2953 Page 4 of 12 N NATA endorsed test report This document shall not be reproduced except in full Tester s Initials A S B S AS 3695 WHEELCHAIRS STANDARD TEST FORM Job Number 490870 AS3695 1992 AS3696 5 1989 OVERALL DIMENSIONS MASS AND TURNING SPACE Overall dimensions Clause 5 of AS3696 3 Reference Reference in Dimensions to the Measured Dimensions to the Measured in clause of clause of nearest 10mm value nearest 10mm value AS3696 5 AS3696 5 Dimensions ready for occupation 5 1 Folded dimensions 5 2 Length mm 1150 5 1 1 Min folded length mm na 5 2 1 Length no footrest or 900 5 1 2 Min folded width mm na 5 2 2 support mm Width mm 720 5 1 3 Min folded height mm na 5 2 3 Overall height mm 1100 5 1 4 Min folded volume cu m na 5 2 4 Reference in Reference in Mass to the nearest Measured Dimensions to the nearest Measured clause of clause of kg value 10mm value AS3696 5 AS3696 5 Mass 33 4 6 Turning space 7 Min turning radius mm 850 7 1 Min turn between walls mm 1235 7 2 Remarks None End of remarks NATA Accredited Laboratory No 2953 Page 5 of 12 N NATA endorsed test report This document shall not be reproduced except in full Tester s Initials A S B S AS 3695 WHEELCHAIRS STANDARD TEST FORM Job Number 490870 AS3695 1
13. on of test samples Any extension of the findings of this report to cover production items must be based on production being truly represented by the sample s 5 Any non conformances are indicated in red END OF REPORT Z NATA Accredited Laboratory No 2953 Page 12 of 12 Ra NATA endorsed test report Tester s Initials A S B S This document shall not be reproduced except in full
14. ping instructions Yes 9 3 8 g Remarks The user s manual for the wheelchair should be made available for perusal by the purchaser at the point of sale Items 9 1 a iii 9 3 9 e may not be known to the manufacturer at the time that compliance with this Standard is sought In such cases the manufacturer may be required to demonstrate an agreement with any distributor for this information to be supplied to the purchaser Artwork of labelling and drafts of the corrected user manual and its clauses were provided End of remarks The sample submitted for this test satisfies the relevant requirements of AS3695 1992 except the methods indicated in this report as not tested Yes and or tested with deviations NOTES 1Ugs5 Uncertainty of measurements where not specified linear 1mm angular 30 force mass 1 temperature 1 C cycles 1 count This means the true measurement is within the stated tolerances at least ninety five times in one hundred 2 All testing was carried out in a controlled environment laboratory using methods set out in the Standards documents all deviations and additions to the Standards methods are noted in remarks 3 All instruments either carried valid calibration certificates throughout the test period or were checked against traceable Standards before and after use 4 The Rehabilitation Equipment Testing Laboratory has no control over the selecti
15. r this test satisfies the relevant requirements of AS3696 8 1998 and AS3695 1992 except the methods indicated in this Yes report as not tested and or tested with deviations for user mass 100 kg Page 8 of 12 Z NATA Accredited Laboratory No 2953 N NATA endorsed test report This document shall not be reproduced except in full Tester s Initials A S B S AS 3695 WHEELCHAIRS STANDARD TEST FORM ye Job Number 490870 novitatech AS3695 1992 Clause 5 DESIGN AND CONSTRUCTION REQUIREMENTS The sample satisfies Design and Construction requirements for protuberances AS3695 Clause 5 1 Burrs or sharp edges on accessible parts of the wheelchair Yes The sample satisfies Design and construction requirements for footrests AS3695 Clause 5 6 For swinging and removable footrests the locking mechanism is positive easily moved y and operated es Movement greater than 10mm when the footrest is loaded and when a horizontal load of Yes 100N is applied in any direction Remarks None End of remarks The sample submitted for this test satisfies the relevant requirements of AS3695 1992 except the methods indicated in this report as not tested Yes and or tested with deviations AS3695 1992 Clause 4 MATERIALS The sample satisfies Materials requirements AS3695 Clause 4 1 4 2 and 4 3 All metal parts are made of corrosion resi
16. stant material or are protected against i E p 3 Not Tested corrosion Stainless steel the surface finish of uncoated stainless steel comply with the Not Tested requirements for finish No 4 of AS 1449 Electroplated coatings of nickel and chromium nickel and chromium electroplatin f oe Not Tested comply with the requirements for Service Condition No 3 Severe of AS 1192 Anodised finish anodised aluminium frames are anodised in accordance with the i E Not Tested requirements for Grade 4 minimum average thickness 10 um of AS 1956 Upholstered components of the wheelchair show neither progressive smouldering nor Yes flaming when tested in accordance with AS 3744 1 Remarks Upholstered components of the wheelchair met the requirements for ignitability of State of California Technical Bulletin 117 Section D more rigorous than AS3774 1 when tested by Intertek Testing Services NA Ltd Test Report No 3072852 March 02 2005 Corrosion surface finish and coatings were not assessed End of remarks The sample submitted for this test satisfies the relevant requirements of Yas AS3695 1992 ignitability only Z NATA Accredited Laboratory No 2953 Page 9 of 12 N NATA endorsed test report Tester s Initials A S B S This document shall not be reproduced except in full AS 3695 WHEELCHAIRS STANDARD TEST FORM Job Number 490870 AS3695 1992 Clauses 8 and 9 MARKING AND INFO
Download Pdf Manuals
Related Search