Product User Manual
Contents
1. SWITCH BOX CSV1 CSV2 Installer and Users manual 72mm mm 162 MM TO XET T _ N dra Range E LN NNN Fixation holes Earth wire fixation hole Earth wire output Entry for the unlock cable Entry for the electric cable 1 gt Prepare the output for the electric and unlock cables respecting the preset sapaces on the switch box Use the 3 fixation holes to fix the switch box to the wall gt Direct connection to the motor gt Connection with electric central board Co Brake wire _ CENTRAL 230V 50 Hz O F 1 Py SEL 2 gt Loosen the fixing screws of the push button and remove it fig 4 Make the electric connection and pass the earth wire terminal through the hole in fig 5 fastening it on the inside of the box The electric cables should have isolated terminal according to all electric safety standards 3 gt Remove the screw present in the cable clamp using a4mm hex wrench and insert the unlock cable on the hole fig 6 When the unlock cable is correctly stretched tighten up the screw Make sure that the motorreducer unlocks when you push the handle fig 7 If the motorreducer is not completely unlocked adjust the tightener Finally cut any excess cable The installation should be done by a qualified technician aN A Keep this equipment away from children ELECTROCELOS S A is not2. responsible for the improper use of the product or other use than the one for which it was designed Check the correct functioning of the operator and safety standards ELECTROCELOS S A is not responsible if safety standards were not taken into account when installing the equipment ELECTROCELOS S A is not responsible for the safety and proper operation when using components not sold by them i case of detecting any anomaly contact a qualified technician D
Download Pdf Manuals
Related Search