Manual GS-DPA - Althen GmbH Meß
Contents
1. 66 info althen de althen de GL100 CO2 LK a re Standby state ENTER key to start lt Operation gt Press ENTER key QUIT key to Power Off Module start up GL100 CO2 LX Initializing 2 Free running screen Hold down the QUIT key approx three seconds to put the module into standby state Press the ENTER key while in standby state to return to the free running screen 3 Setting AMP settings can be set in this combination WE 1 9 AMP input condition settings ven Canter E ILLUM 2000 20000 200000 Ix ILLUM Range 2000001xV For other settings refer to USER S MANUAL of each module 4 Recording Press the START STOP key to start measuring with the set conditions Measurements of two sensors are displayed in the screen You can switch to the Accumulation screen with the lt and Dkeys when recording data REC ALM 1 28 REC ALM 1 28 ILLUM 440Ix ACCUM ILLUM UV A 0 030 2410klx ACCUM UV A C02 736 0 030 h T LAN SD Normal display Accumulation display GRAPHTEC August 1 2014 4EN GmbH 2014 ALTHEN2. GRAPHTEC GS DPA UM 151 Adapter for Branch adapter USER S MANUAL Thank you very much for buying this GRAPHTEC product This module can be used as a measurement adapter hereafter module that connects to the GL100 N GL100 WL These directions describe preparations and cautions before measurement To ensure safety please read the operation instructions etc For details on the warnings and how to handle this module please read the Quick Start Guide or USER S MANUAL included on the CD ROM included in the GL100 packaging Confirmation of the exterior After opening the package please confirm that there are no problems scratches and dirt on the exterior before use Confirmation of the attached items e User s manual this book 1 if by any chance faults are found please contact the store where you bought the item Please note that items mentioned in this book may change without prior notice 604309191 MANUAL ADD 1 Part Names This section describes the name and function of each part 1 Hook portion __ 5 rml 2 Sensor connector 3 Connector GRAPHTEC j nai L PetkLOGGER GLI00 Ooo 4 Cable packing GL100 main module 1 Wall mounting hole Used to mount to a wall 2 Sensor connector The sensor connectors are on the left and right 3 CONMECIOF osoni Used to connect to the connector on the GL100 module 4 Cabl
3. d with batteries CO2 Sensor Temperature and GS CO2 humidity sensor GS TH A iy ee Branch adapter for GS GS DPA The GI100 s power is provided through a USB cable connection re sit Snunneemen 5 GL100 main module A CAUTION It is not possible to be used by connecting two same sensors 1 Screen display menu flow After power on the GL100 is ready for operation by holding down MENU key When the module is connected Module Type Recognition screen is displayed When the module is not connected Module Unconnected State screen is displayed Operate in accordance with the displayed instructions CO2 Sensor Illumination GS CO2 Ultraviolet sensor GS LXUV QW call Yas Branch adapter for GS GS DPA ca The GI100 s power is provided through a USB cable connection GL100 main module A CAUTION It is not possible to be used by connecting two same sensors 1 Screen display menu flow After power on the GL100 is ready for operation by holding down MENU key When the module is connected Module Type Recognition screen is displayed When the module is not connected Module Unconnected State screen is displayed Operate in accordance with the displayed instructions SENSOR ERROR Please connect the senso
4. e packing neeese This packing is used when connecting the connector A CAUTION e The GL100 has basic water protection but this module has no water protection Be careful when installing and handling e Before connecting to the GL100 always connect all of the sensors to the branch adapter and then connect e When using the CO2 sensor in combination with other sensors always use a USB cable connection as the power source e The sensor connector is used for GS LXUV GS CO2 or GS TH only Please do not connect the device other than them The GL100 N GL100 WL may be damaged lt Extension cable gt The module can be used approx 1 5 m away from the GL100 by using an extension cable for GS GS EXC However you cannot connect and use multiple extension cables CAUTION It is not possible to be used by connecting two same sensors 2 Specifications Item Contents Number of connectors 2 channels Connectable sensor Temperature and humidity sensor GS TH Illumination ultraviolet sensor GS LXUV CO2 sensor GS CO2 Cable length approximate 20 cm Usage environment 10 to 50 C 80 RH or less non condensing External dimensions 46 x 66 x 27 4 mm not including protruding parts WxDxH approximate Weight approximate 68g 3 Connectable Sensor 1 Combined illumination ultraviolet sensor and temperature and humidity sensor measurement Composite measurement can be done by using the illum
5. he free running screen 3 Setting AMP settings can be set in this combination 1a AMP input condition settings A ARD ILLUM 2000 20000 200000 Ix UV A Range 30mW cm ILLUM Range 20000017 For other settings refer to USER S MANUAL of each module 4 Recording Press the START STOP key to start measuring with the set conditions Measurements of three sensors are displayed in the screen You can switch to the Accumulation screen with the lt jand keys when recording data REC ALM 1 28 REC ALM see REC ALM 1 28 TEMP 26 16 DEWP 29 75 ACCUM ILLUM HUM 37 3 S amp S 2410klx ILLUM 440l 2 ACCUM TEMP ACCUM UV A UV A 0 030 y 2650CTh 0 030 wh BAT LAN SD S 1 0s BAT LAN SD S 1 0s BAT LAN SD S 1 0s Normal display Accumulation display 1 Accumulation display 2 ALTHEN 2 Combined COz sensor and temperature and humidity sensor measurement Composite measurement can be done by using the CO2 sensor GS CO2 and the temperature and humidity sensor GS TH each sold separately ZAN WARNIN G If the CO2 sensor GS CO2 is included in the assembly it cannot be powered with batteries 3 Combined COz sensor and illumination ultraviolet sensor Composite measurement can be done by using the CO2 sensor GS CO2 and the illumination ultraviolet sensor GS LXUV each sold separately A WARNING If the CO2 sensor GS CO2 is included in the assembly it cannot be powere
6. ination ultraviolet sensor GS LXUV and the temperature and humidity sensor GS TH each sold separately Temperature and humidity sensor GS TH Illumination Ultraviolet sensor GS LXUV Branch adapter for GS GS DPA H H GL100 main module A CAUTION tis not possible to be used by connecting two same sensors 1 Screen display menu flow After power on the GL100 is ready for operation by holding down MENU key When the module is connected Module Type Recognition screen is displayed When the module is not connected Module Unconnected State screen is displayed Operate in accordance with the displayed instructions SENSOR ERROR Module unconnected state Please connect the sensor lt Operation gt QUIT key to Power Off Connect the module Recognition of module types Please wait GL100 TH LX r B Standby state ENTER key to start lt Operation gt Press ENTER key Module start up GL100 TH LX Initializing 2 Free running screen Hold down the QUIT key approx three seconds to STOP ALM 1 28 put the module into standby state TEMP 26 16 When running on batteries the module will HUM 37 3 automatically go into standby state after three ILLUM 440 x minutes of no operation UV A 0 020w Press the ENTER key while in standby state to BAT LAN SD S LORE return to t
7. r QUIT key to Power Off Please wait Module unconnected state lt Operation gt Connect the module Recognition of module types SENSOR ERROR Please connect the sensor QUIT key to Power OFF BAT LAN Please wait Module unconnected state lt Operation gt Connect the module Recognition of module types GL100 CO2 TH i W Standby state eee f lt Operation gt Press ENTER key QUIT key to Power Off Module start up GL100 C02 TH Initializing 2 Free running screen TEM P Hold down the QUIT key approx three seconds to HUM put the module into standby state DEWP A Press the ENTER key while in standby state to co2 return to the free running screen BAT LAN SD 3 Setting For the settings refer to USER S MANUAL of each module 4 Recording Press the START STOP key to start measuring with the set conditions Measurements of two sensors are displayed in the screen You can switch to the Accumulation screen with the lt land Dkeys when recording data REC ALM 1 28 R ALM 1 28 TEMP 26 166 DEWP 29 75 HUM 37 3 DEWP 10 30 2 ACCUM TEMP C02 736 2650h BAT LAN SD S 1 0s BAT LAN SD S 1 0s Normal display Accumulation display ALTHEN GmbH Me und Sensortechnik Frankfurter Stra e 150 152 65779 Kelkheim Tel 49 0 6195 70060 Fax 49 0 6195 70 06
Download Pdf Manuals
Related Search