VoIP Demo System User Manual
Contents
1. if not got match number will send out 1 If you need to add a phone number into the phone book you need to input the position the name and the phone number by URL type When you finished a new phone list just click the Add Phone button If you want to delete a phone number you can select the phone number you want to delete then click Delete Selected button If you want to delete all phone numbers you can click Delete All button 3 4 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide Phone Book You could add delete items in current phone book Phone Book Page page 1 Y META E E O Select oon OOF W NY O Delete Selected Delete All Reset Add New Phone Position 0 139 Name URL Add Phone Reset Figure 2 Speed Dial Phone Setting 3 4 1 3 4 2 2 3 In Phone Setting contains Call Forward SNTP Settings Volume Settings DND Settings Auto Answer Caller ID Dial Plan Settings Flash Time Settings Call Waiting and T 38 FAX Setting Hot line Settings and Alarm Settings functions Call Forward function you can setup the phone number you want to forward in this page There are three type of Forward mode You can choose All Forward Busy Forward and No Answer Forward by click the icon All Forward All incoming call will forward to the number you choosed You can input the name description and the phone number in URL field If you select this function2. T 38 Setting function You can Enable Disable the T 38 function When you finished the setting please click the Submit button If there is nothing need to change please click the Save Change Item in the left side then click the Save button The change you made will save into the system and the system will Reboot automatically Note T 38 Port of Phone 2 is only supported in ATA172 T 38 FAX Setting You could enable disable the FAX function in this page T 38 FAX on Oof T 38 Port of Phone1 60000 Only support one port at a time T 38 Port of Phone2 60100 1024 65533 Figure 11 T 38 FAX Setting 3 5 Hotline Hot line Setting You could set the hot line in this page Use Hot Line Enable O Disable Hot line number This function is support auto dial to you setting hot line number when you setting this function device cannot dial any number 20 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide 3 6 Alarm setting Alarm Settings You could set the alarm time in this page Alarm OON OFF Alarm Time o Ho hh mm Current time 2006 10 05 17 47 Alarm time setting telephone ring time when you setting time with current time are match device should produce a ring this time format is 24 hours 3 7 Network 3 7 1 In Network you can check the Network Status WAN Settings LAN Settings DDNS Settings VLAN Settings DMZ Setting Virtual Server and PPTP Settings 3 7 2 Netw
3. Show ping Option 2 ping N IP addr host name 3 null ping IP addr host name 52 ATA 171 172 171P 171M ATA S1 S2 P M 13 sip function User s Guide Index Command Description 1 2 Show sip Option 2 proxy0 sip proxy0 3 proxy1 sip proxy1 4 proxy2 sip proxy2 5 upnp sip upnp on off show 6 exts sip exts sip upnp external port 7 extr sip extr rtp upnp external port 8 sipp sip udp port 9 rtpp sip rtp port 10 stun sip stun on off 11 rport sip rport on off 12 sserver sip sserver stun server 13 out sip out outbound proxy 14 dump sip dump 15 log sip log on off 16 drtp sip drtp 0 1 2 17 ripnc sip rtpnc on off 18 wanip sip wanip 19 nattype sip nattype 20 hbyrfc sip hbyrfc 21 dereg sip dereg 22 restart sip restart 23 jbt sip jitter buffer Threshold 24 null Show SIP Setting 14 ddns function Index Command Description 1 Show ddns Option 2 type Set DDNS Type 3 host Set Host Name 4 wild Set Wild Card Mode 5 mx Set Mail Exchanger 6 backmx Set Mail Exchanger Mode 7 offline Set Offline Mode 8 user Set Login User Name 9 pass Set Login Password 10 null Show DDNS Setting 15 sntp function Index Command Description 1 Show sntp Option 2 on Enable SNTP Clie
4. BOOK A edhe eect that Ate tee hc eee eat Ave athe dees 9 3 4 Phone SUN ii A th tA he a ui A oe ee ade 10 3 5 FIOUIING tdi A a TA E te a eee EYE 20 3 6 AlarmiS tting iii aii 21 3 7 N tWOMK tasca hati taney entice Wakes 21 3 8 Virtual Server Setting cccceecceesceceeeceeeeeeeeseeceeeceeeaaeeeeaaesaaaesnaeeeeaaesseaaesseaeesnaeeseaaeesseeeneaas 26 3 9 DMZ Settings ists esac ove ca iete nae ic anit iaa 27 3 1 0 CRIA SONS Cairo 28 SAT SIP SOUINOS sr ra a a Ea 29 34127 NAT TANS ars 34 O O E EFE E A A A A eet athe ont onal 35 3 14 MAC Clone setting oooomcocinicinnnnnnnnnnnncconcconccnnnncccn crac 43 Sl System AU Dia rai 43 3 165 Save Change aci iia 44 3 17 Update Rom firmware o cccccccnnnninnnncncnncccconnnn non nano cnn rn 45 3 18 gt REDO mita ic 47 Setup the ATA by using Console Hyper Terminal c cccccseeceeeeeeeeeeeceaeeeeaeeseeeeeesaeeeeaaeseeeeeeaas 48 4 1 Configure the COM POlEcccnccconnncnnncccnonccononnno nn n nan c nc nc cnn cnn 48 4 2 LOGIN UNtO NS ATA ss A A E 49 4 3 Using CLI command to configure the ATA ccncccnccconocccnnccnnanccnnornnn nora cc 50 How to make a phone Call ceceecceceeeeceeeeeeeeeseeeeeeteeseaneeseeseeeeseesaneeseesenseseeseneeseseeneeseeenensesensenees 56 1 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide Introduction This user s manual is for 1 port FXS and 1 port FXO FXO only supported in ATA171M VoIP terminal adapter ATA This user s manual will expla
5. this number will be dialed You can set this option within the range of 3 9 seconds Dial now xx xx 11X XXXXXXXX Explanation 1 If the number dialed matches the rule xx it will automatically dial the dialed number e g 00 01 02 99 If the user happens to dial more digits in the end such as 001111 the system will detect that the first two matches the rule and send out the number 00 regardless of the remaining digits Hence the name Dial Now Explanation 2 If the number dialed matches the rule xx it will automatically dial the dialed number e g 00 01 02 99 If the user happens to dial more digits in the end such as 001111 the system will detect that the first two matches the rule and send out the number 00 regardless of the remaining digits Hence the name Dial Now Explanation 3 If the number dialed matches the rule 11x then it will automatically dial the dialed number e g 110 111 112 119 If the user happens to dial more digits in the end such as 1101234 the system will detect that the first three matches the rule and send out the number 110 regardless of the remaining digits Hence the name Dial Now Explanation 4 If it detects the number dialed is 8 digits then it will automatically send out the number dialed e g 12345678 17 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide 3 4 9 Flash Time Setting function When you use the PSTN Phone and you need to press the
6. tore store the product to proper operating condition Any replacement will consist of a new or re manufactured functionally equivalent product of equal value and will be offered solely at our discretion This warranty will not apply if the product is modified misused tampered with damaged by an act of God or subjected to abnormal working conditions The warranty does not cover the bundled or licensed software of other vendors Defects which do not significantly affect the usability of the product will not be covered by the warranty We reserve the right to revise the manual and online documentation and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes It s due to the continuous evolution of WELLTECH Computer Co Ltd this model will be regularly upgraded Please consult the WELLTECH web site for more information on latest firmware tools and documents http www welltech com ATA 171 172 171P 171M ATA S1 S2 P M User s Guide INTO UC ON ri A ee 4 1 1 Hardware Overview unitat iii A Aaa et 4 1 2 Software OVOIVMI Wisin ia Ai aaa 4 Keypad Interface for The ATA tic it tha ed A ete 5 Setup the ATA by Web Browser LAN COMectiOM oooiccccnncnnnnncnnncnnonccccocnnn carac cnn cnn rn 7 3 1 A cat ant ie Se oe Aha en ie ei ee ee ia 7 3 2 System Information for the ATA cc cccecccecseeeeeeeeceeeeeceaeeeeeaeeeeneeceaeeesaaesesaaeseeeeeseaeesenaaeeeenees 9 3 3 PONG
7. G Packet Loss Compensation Adaptive Jitter Buffer 4 QoS HTTP 1 1 basic digest authentication for Web setup MDS for SIP authentication RFC2069 RFC 2617 Call Function e ToS field Call Hold Call Waiting Call Forward e STUN Caller ID NAT Traversal 3 way conference Configuration DTMF Function e In Band DTMF e Out of Band DTMF e SIP Info SIP Server e Registrar Server three SIP account e Outbound Proxy e Web Browser e Console Telnet e VR Keypad Firmware Upgrade e TFTP e Console HTTP ATA 171 172 171P 171M ATA S1 S2 P M User s Guide 2 Keypad Interface for The ATA your terminal adapter You can use the PSTN phone keypad to operate the ATA Please follow the instruction to configure Group IVR Action IVR Menu Choice Parameter s Notes Press 0 can pass call to PSTN Function pe E a O None Line user can dial out from PSTN Line For 171P and 171M Unlock keypad After you unlock keypad setting ee setting 190 Nong then you may configure the ATA After you hear Option Successful Function Reboot 195 None hang up The system will reboot automatically System will automatically reboot WARNING ALL User Changeable Function Factory Reset 198 None NONDEFAULT SETTINGS WILL BE LOST This will include network and service provider data Enable PPTP Syst
8. Gor gt Voice QoS DiffServ 40 0 63 SIP QoS DifSen 40 0 63 gt SIP Expire Time 60 30 86400 sec Use DNS SRV Oon Gor Figure 24 Other Setting 3 12 NAT Trans 3 12 1 3 12 2 In NAT Trans you can setup STUN function These functions can help your ATA working properly behind NAT STUN Setting you can setup the STUN Enable Disable and STUN Server IP address in this page This function can help your TA working properly behind NAT To change these settings please following your ISP information When you finished the setting please click the Submit button If there is nothing need to change please click the Save Change Item in the left side then click the Save button The change you made will save into the system and the system will Reboot automatically 34 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide y STUN Setting Nx 7 You could setthe IP of STUN server in this page STUN Con off Phone Book gt STUN Server tun xten com e Sai STUN Port 1478 1024 65535 one Setting gt Reset Network E SIP Settings 5 Ar HSTUN Settings Others Figure 195 STUN Setting 3 13 Others 3 13 1 In Others you can setup Auto Config PTT Setting and ICMP Setting function The function can configure your VolP Phone automatically 3 13 2 Auto Config you can setup the Auto Configuration Enable Disable and auto configuration by FTP or TFTP You need to select the way to do the Auto Config
9. Hook to do the Flash Switch to the other phone line or HOLD this function is for you to set the time you press the Hook to represent the Flash function When you finished the setting please click the Submit button If there is nothing need to change please click the Save Change ltem in the left side then click the Save button The change you made will save into the system and the system will Reboot automatically Note Configuration for FXO Flash Time is only supported in ATA171M Flash Time Setting You could set the flash time in this page A FXO Flash Time Phone Book Flash Time 60 x 10MS 9 120 FXS Flash Time Max Flash Time 60 x 10MS 4 255 Figure 9 Flash Time Setting ATA 171 172 171P 171M ATA S1 S2 P M User s Guide 3 4 10 Call Waiting Setting function You can Enable Disable the Call Waiting function When you are talking with someone there is a new incoming call you will hear the call waiting tone When you finished the setting please click the Submit button If there is nothing need to change please click the Save Change ltem in the left side then click the Save button The change you made will save into the system and the system will Reboot automatically Call Waiting Setting You could enable disable the call waiting setting in this page Call Waiting On OOff A lv Figure 10 Call Waiting Setting 19 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide 3 4 11
10. ID after 1st Ring FSK J Single Caller ID OYes ONo CID Without Time OYes ONo Figure 7 Caller ID Setting 14 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide 3 4 8 Dial Plan Settings function This function is when you input the phone number by the keypad but you don t need to press After time out the system will dial directly When you finished the setting please click the Submit button If there is nothing need to change please click the Save Change Item in the left side then click the Save button The change you made will save into the system and the system will Reboot automatically Dial Plan You could the set the dial plan in this page Drop prefix OYes ONo Replace rule 1 Drop prefix OYes No Replace rule 2 Drop prefix OYes ONo Replace rule 3 Drop prefix OYes No Replace rule 4 Dial now Auto Dial Time 5 3 9 sec Use as send key Yes ONo Use for IP dialing Yes ONo Figure 8 Auto Dial Setting Drop Prefix No add number when the rule match will direct add number Yes reduce number when the rule match will cut match number then add you setting number Replace rulel Setting dial number rule ore xxx number limit Dial Now When there is a number that matches this field the device will automatically dial the number specified However first digit cannot be set to 0 because the feature Dial Now is unable to detect first d
11. IP address from the DHCP Server If you change the LAN port s setting to PPPoE Mode you have to input a correct username password to get the IP address from your Internet Service Provider If you set the Bridge On then the two Fast Ethernet ports will be transparent Usually we suggest you set the Bridge Mode is Enable it will easy for you to connect any one of the port to the IP Network When you finished the setting please click the Submit button If there is nothing need to change please click the Save Change ltem in the left side then click the Save button The change you made will save into the system and the system will Reboot automatically A yalp Phone Book Phone Setting ee WAN Settings You could configure the WAN settings in this page LAN Mode OBridge NAT WAN Setting IP Type OFixed IP O DHCP Client O PPPoE gt P Mask Gateway DNS Semvert 168 95 192 1 DNS Server2 168 95 1 1 MAC Host Name VOIP_TA2S User Name Password Figure 145 WAN Settings 23 ES 3 7 4 Phone Book Phone Setting Save Change ATA 171 172 171P 171M ATA S1 S2 P M User s Guide DDNS Setting You can configure the DDNS setting in this page You need to have the DDNS account and input the informations properly You can have a DDNS account with a public IP address then others can call you via the DDNS account But now m
12. Setting you can restore the TA to factory default in this page You can just click the Restore button then the TA will restore to default and automatically restart again The Default Setting will be NAT Mode WAN port is DHCP Client Mode LAN port is Fixed IP Mode and the IP Address is 192 168 123 1 A y Restore Default Settings fai You could click the restore button to restore the factory settings ie Ss Restore default settings Network SIP Settings NAT Trans Others System Auth Save Change Figure 33 Restore Default Setting 46 3 18 Reboot ATA 171 172 171P 171M ATA S1 S2 P M User s Guide 3 18 1 Reboot function you can restart the ATA If you want to restart the ATA you can just click the Reboot button then the ATA will automatically SIP Settings NAT Trans Others System Auth Save Change Update Reboot y Reboot System W N You could press the reboot button to restart the system d Reboot system Figure 34 Reboot System 47 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide 4 Setup the ATA by using Console Hyper Terminal 4 1 Configure the COM port First Open the hyper terminal window select the connection by the COM port and then click the Setting button CM5000 AF D CM5000 SS BT ES SAMA gt PENA AEB gt iE ESB O RAAD Figure 23 Console Setting 1 Set the COM port s setting as following setting Th
13. for these 3 user priority bits Usually this will be defined by your service provider CFI Canonical Format Indicator is always set to zero for Ethernet switches CFI is used for compatibility reason between Ethernet type network and Token Ring type network If a frame received at an Ethernet port has a CFI set to 1 then that frame should not be forwarded as it is to an untagged port When you enable the first VLAN Packets and set the VID User Priority and CFI then all the incoming packets with the TA s IP address and the same VID will be accept by the TA If the incoming packets with the TA s IP address but the different VID then the packets will be discard by the TA The Other incoming packets with different IP address will go through the LAN port to the PC If there is nothing need to change please click the Save Change Item in the left side then click the Save button The change you made will save into the system and the system will Reboot automatically VLAN Settings You could set the VLAN settings in this page A VLAN Packets O0n of VID 802 1Q TAG 136 2 4094 E User Priority 802 1P 0 0 7 gt CFI 1 0 1 Figure 16 VLAN Setting 25 3 8 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide Virtual Server Setting Virtual Server Settings You could set your virtual servers in this page The usual port numbers are WEB TCP 80 FTP Control TCP 21 FTP Data TCP 20 E mail POP3 TCP
14. the phone number The ATA also provides some functions that list as below 1 2 3 Call Waiting When a new call is coming while you are talking you can push the Flash button to switch to the new call You can push the Flash button to switch between the two calls Call Hold You can push the Hold key to hold the current call for a while then push Hold key again to keep talking 3 way conference If you want to make a 3 way conference call you can make a phone call to the first phone number After the call is established push the Flash button then you can hear the Dial tone then make a phone call to the second phone number When the second call is established press the Flash button again 56
15. the device that you want to configured for e g MAC Address 00059e812118 B MACList txt RFA fe BED AO HIROD O MAC address DisplayName UserName RegisterName RegisterPass 00059e812118 UN_DO 105 105 105 Explanation 1 open the MACList txt file then enter the these information in order MAC Address Display Name User Name Register Name Register Pass example 00059e812118 UN_DO 105 105 105 when completed please save your file Explanation 2 open the StandardCFG dat file use Windows notepad program to open the file then change the configurations parameters accordingly once finished please save the file Explanation 3 open the MakeMACF exe file gt download MAC File MACList txt Standard File StandardCFG dat select Start then encrypt the file 4 IP Phone Configuration Maker Version 1 3 0 Please Select MAC file S055 rowse Please Select Standar file 1 Standardcfg dat Browse Encryption Key pue 8 characters Current is default key N Enrcryption Start Exit Explanation 4 the program will produce a encrypted string 00059e812118 dat as the filename Explanation 5 please insert the name of the newly encrypted filename 00059e812118 dat to your HTTP or FTP or TFTP Server file path 38 3 13 7 Advanced Setting ICMP Setting you can setup the ICMP echo Enable Disable in this page This function can disable echo when someone ping this de
16. 110 E mail SMTP TCP 25 DNS UDP 53 and Telent TCP 23 Virtual Server Page page 1 Y Num Enable Protocol InPort ExPort 0 ServerIP Select NOOO amp WN CO Enable Selected Delete Selected Delete All Reset Add Virtual Server Nurn 0 23 Server IP Protocol TCP Internal Port External Port Add Server Reset Virtual Server Page To browse through different pages click on the drop down box and select the page number you wish to view Num This column displays the serial numbers ranging from 0 23 There are 24 records in total Enable Click on the check box to enable this option the default option is unchecked disabled Protocol Displays the TCP and UDP port information In Port Displays the internal port number Ex Port Displays the external port number Server IP Shows the IP address of the Server Select To select a specific Virtual Server and perform configurations click on the check box according to the server that you wish to configure Enable Selected Enable the selected server Button Delete Selected Delete the selected server Button Delete All Button Delete all data Reset Button Clean all data Num Button Specify which record to insert the server on the table The allowable range is 0 23 26 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide 3 9 DMZ Setting DMZ Setting You could configure you
17. ATA 171 172 171P 171M ATA S1 S2 P M User s Guide ATA 171 172 171P 171M ATA S1 S2 P M User s Guide V2 0 2007 08 23 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide Copyright and Trademarks Specifications are subject to change without notice WELLTECH is a registered trademark and or its affiliates in Taiwan and certain other countries Copyright O 2007 WELLTECH Computer Co Ltd All rights reserved Other brands and product names are trademarks or registered trademarks of their respective holders Safety Instructions and Approval Safety O Instructions O To assure the finest performance please read this manual carefully before install or operating the unit Keep it in a safe place for future reference Only authorized and qualified personnel may install or repair this product Do not try to open or repair the unit yourself Install the unit in a well ventilated cool dry clean place away from windows direct sunlight heat sources vibration dust moisture or cold Don t touch the antenna unnecessarily To prevent fire or electrical shock don t expose to rain or water Do not operate the unit upside down It may overheat possibly causing damage Grounding or polarization Precaution should be taken so that the grounding or polarization of the unit is not defeated To prevent damage by lightning disconnect the power cord from the wall outlet during an electrical storm The voltage to be used
18. Name and Password 10 nat NAT Configuration 11 dns DNS Configuration 12 ping ping IN IP addr host name 13 sip SIP Configuartion 14 ddns DDNS Configuartion 15 sntp SNTP Configuartion 16 vian VLAN Configuartion 17 time Get System Time 18 mactab Show MAC Learning Table 19 dump Read Write Memory 20 book Edit phone book 21 reload Reload Factory Setting 22 watchdog WatchDog Function 23 phone Phone Setting 24 weblogo Change Web s logo 25 dsp Show dsp type 26 addport Add Nat Port Mapping 27 cid Select slic Cid 28 slic read or write slic registers 29 ver Firmware Version 1 function is to show CLI command list in the screen 2 arp function Index Command Description 1 Show arp Option 2 a Show ARP Table 3 d Delete ARP Table 4 S Set Static ARP Table 5 null Show ARP Table 3 ipconfig function Index Command Description 1 Show ipconfig Option 2 if0 Interface 0 3 1f1 Interface 1 4 if2 Interface 2 5 h Set Host Name 6 a Set ARP Cache Expire 7 r Restore Current Setting 8 null Show IP Setting 50 ATA 171 172 171P 171M ATA S1 S2 P M 3 1 ipconfig ifN function gt N is 0 1 2 User s Guide Index Command Description 1 2 Show ipconfig ifN Option 2 t Set Host Type 3 m Set MAC Address 4 i Set IP Address 5 nm Set Net Mask 6 g Set Gateway 7 dns0 Set Prima
19. and FXO in this page When you are using different country s PSTN Phone you have to set the country s setting to meet the requirement When you finished the setting please click the Submit button Note Configuration for FXO is only supported in ATA171M FXO amp FXS Impedence Setting You could select the FXO amp FXS impedence of the analog telephone by different country in this page Pains Boek FXO Port USA i i gt FXS Port USA Phone Setting Network SIP Settings 5 gt NAT Trans Figure 229 FXS and FXO impedence Setting 41 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide 3 13 9 Call Transfer Operation Blind Transfer Unconditional Transfer B calls A A and B establishes a connection and during the conversation A performs a call transfer to a third party Firstly A holds B s conversation channel presses 510 then keys in the number of the third party After that A presses the hash symbol to initiate the call transfer to the third party Note For 171M this will only work when transferring a call from IP to IP Attendant Transfer B calls A A and B establishes a connection and during the conversation A performs a call transfer to a third party Firstly A holds B s conversation channel presses 511 then keys in the number of the third party After that A presses the hash symbol to initiate the call transfer to the third party C C accepts the incoming call and es
20. ated with the inputted username to log on to the FTP Server File Path Specify the path to store data for e g 123 Submit Button Saves the configuration Reset Button Erases the configuration 36 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide 3 13 5 Auto configuration example Example 1 Auto Configuration Setting You could enable disable the auto configuration setting in this page Auto Configuration TFTP Server HTTP Server HTTP Path FTP Server FTP Username FTP Password File Path Oof OTFTP O FTP HTIP 192 168 1 150 jile Auto Configuration HTTP HTTP Server 192 168 1 50 HTTP Path file Explanation device will connect to the HTTP Server s file folder path and search the matching file gt Auto Configuration Setting You could enable disable the auto configuration setting in this page Auto Configuration TFTP Server HTTP Server HTTP Path FTP Server FTP Username FTP Password File Path Oof OTFTP FTIP OHTIP 192 168 1 150 test file 2 Auto Configuration FTP FTP Server 192 168 1 150 FTP Username test FTP Password test gt File Path file Comment 1 device will connect to the FTP Server s file folder path and search the matching file gt 37 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide 3 13 6 How to produce auto Configuration file 1 Firstly you need to find the MAC address of
21. coming call 5 ring Set Melody Ringer 6 forward Auto forward Incall to Phone 0 9 in Book 7 null Show Phone Setting 54 ATA 171 172 171P 171M ATA S1 S2 P M 24 weblogo function User s Guide Index Command Description 1 2 Show weblogo Option 2 on Vender Logo 3 off Default Logo 4 null Show weblogo Setting 25 dsp function is to show dsp code type 26 addport function is to add Nat Port Mapping 27 cid function Index Command Description 1 Show cid Option 2 off Disable Slic Cid signal 3 1 Tx FSK after 1st Ring 4 2 Tx FSK before 1st Ring 5 3 Tx DTMF before 1st Ring 6 4 Tx FSK with Line reversal before 1st Ring 7 5 Tx DTMF with Line reversal before 1st Ring 8 time FSK cid with time message 9 single Single type FSK CID 10 null Show Cid Option 28 slic function Index Command Description 1 2 Show slic Option 2 ring Issue Ring signal 3 r read slic addr 4 W write slic addr 5 a read all slic reg 6 null Show slic register 29 ver function is to show Firmware Version 55 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide 5 How to make a phone call When your ATA is configured properly you can make a phone call to your friend in the same Service provider If you want to make a phone call you can dial the phone number and press button to start to dial
22. device will send a signal to notify about the billing status Polarity Reversal Tone_12K Tone _16k Support FXS Port CPC Delay Default is 2 seconds allows the system the ability to adjust the time taken to lower the voltage to OV upon disconnection Support FXS Port CPC Duration Default value is Oms do not lower any voltage Specifies how long the voltage will remain in ms when it is lowered to 0V Send Flash event Default setting is Disabled do not activate Provides two methods for sending flash event messages DTMF Event and SIP Info SIP Encrypt Default setting is Disabled do not activate SIP s encryption method four options to choose from INFINET AVS WALKERSUNI WALKERSUN2 Only works under environments that provide these services PPPoE retry period System Log Server Default value is 5 seconds range is from 5 255 taken to redial when PPPoE dialing fails Specifies the time Specifies the location of the System log server where log information will be stored System Log Type Default setting is None do not activate log messages four to choose from None Call Statistics Information and Both Specifies the format of system Debug Submit Button Save setting value Reset Button Clean all setting 40 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide 3 13 8 FXS and FXO impedence Setting you can setup the FXS
23. dministrator user name password 3 sys0 Change System user0 user name password 4 sys1 Change System user1 user name password 5 Sys2 Change System user2 user name password 6 Sys3 Change System user3 user name password 7 sys4 Change System user4 user name password 8 norm0 Change Normal user0 user name password 9 norm1 Change Normal user1 user name password 10 norm2 Change Normal user2 user name password 11 norm3 Change Normal user3 user name password 12 norm4 Change Normal user4 user name password 13 ppp Change PPP user name password 14 null Show auth Setting In each item includes Index Command Description 1 Show auth Option 2 user Change User Name auth sys3 user xxx 3 pass Change Password auth sys3 pass xxx xxx 4 null Show auth s System PPP Setting If you want to change the password you need to type the password twice in the CLI 10 nat function Index Command Description 1 Show nat Option 2 VS Set nat vs Option 3 dmz Set nat dmz Option 4 null Show NAT Setting In DMZ item includes Index Command Description 1 Show nat dmz Option 2 on EnableDMZ 3 off EnableDMZ 4 ip Set DMZ IP address 5 null Show DMZ Setting 11 dns function Index Command Description 1 2 Show dns Option 2 DNS query dns q domain name 3 null Show DNS Table 12 ping function Index Command Description 1
24. dress using numbers on Set Primary DNS feta ins ols the telephone keypad Use the Setting Server 115XXX XXX XXX XXX star key when entering a decimal Must set Static IP first point 1 G 711 u Law 2 G711 a Law 4 Setting SetCodec 130 1 8 G 729a 5 G726 16K 6 G726 24K aed A codec yo want 19 7 G726 32K 8 G 726 40K p y Set Handset 5 You can set the Handset gain to Setting Gain 131 00 15 Handset Gain from 0 15 proper value default is 6 F Set Handset You can set the Handset volume to Setting Vol mo 132 00 12 Handset Volume from 0 12 proper value default is 10 Set Auto Select the auto configuration mode in Setting Configuration 137X the X field you can press the dl Aedo eee Mode following 0 OFF 1 TFTP 2 FTP y i Set Auto Enter IP address using numbers on Setting Configuration 135XXX XXX XXX XXX ea a a Fe contigurationimethog For TFTP Server point y 9 Set Auto Enter IP address using numbers on Setting Configuration 136XXX XXX XXX XXX the telephone keypad Use the Must set auto configuration method For FTP Server star key when entering a decimal point to FTP first ATA 171 172 171P 171M ATA S1 S2 P M User s Guide 3 Setup the ATA by Web Browser LAN connection The ATA provides a built in web server You can use a Web browser to configure the ATA For more detail instructions please refer to the procedures below Step 1 Connect a straight through cable f
25. em will automatically reboot Faneuon client HISE None and PPTP client will be enabled Disable PPTP System will automatically reboot Furiction client lel Nene and PPTP client wil be disabled System will automatically reboot Function Enable VLAN 118 None and VLAN will be enabled System will automatically reboot Function Disable VLAN 119 None and VLAN will be disabled Enable Call System will automatically reboot Function Waiting 138 None and Call Waiting will be enabled Disable Call System will automatically reboot Furiction Waiting coal None and Call Waiting will be disabled Enable System will automatically reboot Function A 140 None and Send Anonymous CID will be nonymous enabled Disable System will automatically reboot Function A 141 None and Send Anonymous CID will be nonymous i disabled Can only be performed in a phone call conversation For 171M this Function Blind Transfer 510 None all instar he curet IP Mie t0 another IP line Can only be performed in a phone call conversation For 171M this Function ese 511 None will transfer the line to IP from PSTN must be in IP mode to execute this command 3 way calling IP Can only be performed in a phone oo Conference cd None call conversation Can only be performed in a phone Attendant call conversation For 171M this Function Transfer 514 None will transfer the line to PSTN from IP must be in PSTN mode to execute this command Check WAN IP IVR will an
26. en click OK COM1 AS E 2 SCRE EERE 57600 M aerO fa y Aimee y eine ff y RENO Figure 24 Console Setting 2 48 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide 4 2 Login into the ATA After finished the setting click the Connect button looks like a telephone icon Then the hyper terminal is ready to connect to the ATA Press Enter and the hyper terminal will show the Login Input root and press the Enter button Then hyper terminal will show the Password Input test and press the Enter button Now you already login the ATA Please follow the CLI command list to configure the ATA with proper instruction and value cm5000 BREIE BRO REO RAO FUO MED HAD E 3309 Y Login Password xxx Login Correct i gt E mE 55 00 00 53 SEAM 576008 N 1 Figure 25 Console Screen 49 ATA 171 172 171P 171M ATA S1 S2 P M 4 3 Using CLI command to configure the ATA User s Guide 4 3 1 CLI command list as below Index Command Description 1 Show CLI Command 2 arp ARP Configuration 3 ipconfig Interface Configuration 4 save Save to flash 5 reboot Reboot 6 exit Exit 7 debugmode Enter Debug Mode 8 update Update Flash Code RAM 9 auth Change User
27. get the date time information Also you can base on your location to set the Time Zone and how long need to synchronize again When you finished the setting please click the Submit button Phone Book gt SNTP Settings You could set the SNTP servers in this page SNTP 0On Oof Primary Server time windows com Secondary Server 1208 184 49 9 Time Zone GMT Y 08 v 00 hh mm Sync Time i 0 E 0 dd hh mm Figure 4 SNTP Setting 11 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide 3 4 4 Volume Setting function you can setup the Handset Volume Ringer Volume and the Handset Gain When you finished the setting please click the Submit button 1 Handset Volume is to set the volume for you can hear from the handset 2 Ringer Volume is to set the ringer volume for you can hear 3 PSTN Out Volume is is to set the volume for you can hear from the PSTN side Note Only supported in ATA171M 4 Handset Gain is to set the volume send out to the other side s handset 5 PSTN In Gain is to set the volume send out to the other side Note Only supported in ATA171M 6 When you finished the setting please click the Submit button 7 If there is nothing need to change please click the Save Change Item in the left side then click the Save button The change you made will save into the system and the system will Reboot automatically Volume Setting You could set t
28. he volume of your phone in this page a Handset Volume 110 0 12 Phone Book P PSTN Out Volume 11 o 0 12 Handset Gain 10 0 15 PSTN In Gain 10 0 15 Figure 5 Volume Setting 3 4 5 DND Setting function you can setup the DND Setting to keep the phone slience You can choose Always Block or Block a period 1 Always DND All incoming call will be blocked until disable this feature 2 DND Period Set a time period and the phone will be blocked during the time period If the From time is large than the To time the Block time will from Day 1 to Day 2 3 When you finished the setting please click the Submit button 4 f there is nothing need to change please click the Save Change Item in the left side then click the Save button The change you made will save into the system and the system will Reboot automatically 12 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide DND Setting You could set the do not disturb period of your phone in this page amp DND Always Oon Gor Phone Book k DND Period Oon Oof From 3 hh mm To E hh mm LR E Figure 6 DND Setting 3 4 6 Auto Answer For 171M only 1 You can choose to disable or enable Auto Answer feature 2 Auto Answer Counter Specifies how many ring tones will be heard before it is switched to IP or PSTN line depending on the type of incoming call Default value is 3 you can
29. ient mode then you can get IP addreess from the ATA When you finished the setting please click the Submit button If there is nothing need to change please click the Save Change Item in the left side then click the Save button The change you made will save into the system and the system will Reboot automatically Network Status This page shows current status of network interfaces of the system a Type DHCP Client gt IP 192 168 15 95 Mask 255 255 248 0 gt Gateway 192 168 8 254 DNS Server 1 168 95 192 1 DNS Server 2 168 95 1 1 LAN Settings Type DHCP Server IP 192 168 123 1 Mask 255 255 255 0 Gateway 192 168 123 1 DNS Server 1 168 95 192 1 DNS Server 2 168 95 1 1 Figure 13 Network Settings ATA 171 172 171P 171M ATA S1 S2 P M User s Guide Bridge Setting If you don t want to use the NAT Mode then you can set the network setting in this page 9 10 11 12 13 14 The TCP IP Configuration item is to setup the LAN port s network environment You may refer to your current network environment to configure the VolP Phone properly If you change the LAN port s setting to Fix IP Mode then you have to make sure the IP address Net Mask Gateway and DNS setting is suitable in your current network environment If you change the LAN port s setting to DHCP Client Mode then you have to make sure in your current network environment has a DHCP server then the TA will get the
30. ify In Service Domain Function you need to input the account and the related informations in this page please refer to your ISP provider You can register three SIP account in the TA You can dial the VolP phone to your friends via first enable SIP account and receive the phone from these three SIP accounts For the second phone you can use the same way to register First you need click Active to enable the Service Domain then you can input the following items Display Name you can input the name you want to display 2 User Name you need to input the User Name get from your ISP 3 Register Name you need to input the Register Name get from your ISP 4 Register Password you need to input the Register Password get from your ISP 5 Domain Server you need to input the Domain Server get from your ISP 6 Proxy Server you need to input the Proxy Server get from your ISP 7 Outbound Proxy you need to input the Outbound Proxy get from your ISP If your ISP does not provide the information then you can skip this item 1 8 Register Period you need to input the Register Period get from your ISP This is count in minute 1 9 You can see the Register Status in the Status item If the item shows Registered then your TA is registered to the ISP you can make a phone call direcly 1 10 If you have more than one SIP account you can following the steps to register to the other ISP 1 11 When you finished the setting
31. igit as O Therefore if Dial Now is set to Oxxxx the system will not be able to send out this piece of information Auto Dial Time Wait setting time then auto dial number Submit Button Save setting value Reset Button Clean all setting 15 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide For example Dial Plan You could the set the dial plan in this page Drop prefix OYes ONo Replace rule 1 1002 8613 8662 Drop prefix OYes ONo Replace rule 2 1006 002 003 004 005 007 009 Drop prefix OYes ONo Replace rule 3 1009 Je 12 Drop prefix OYes No Replace rule 4 1007 5xxx 35xx 21xx Dial now XX XX 11X XXXXXXXX Auto Dial Time 5 3 9 sec Use as send key Yes ONo Use for IP dialing Yes ONo 1 Drop prefix No Replace rule 1 002 8613 8662 Explanation If you dial a number that has a prefix matching 8613 or 8662 the device will automatically append the number 002 in front of the dialed number therefore the number that will be dialed out is 002 8613 xxx or 002 8662 xxx depending on which of the two numbers were dialed 2 Drop prefix Yes Replace rule 2 006 002 003 004 005 007 009 Explanation If you dial a number that has a prefix matching 002 003 004 005 007 or 009 the device will drop all these numbers and replace it with 006 therefore the number that will be dialed out is 006 xxx 3 Drop prefix No Replace rule 3 009 12 Explana
32. in the IVR instruction web configuration and command line configuration for the ATA Before using the ATA some setup processes are required to make the ATA work properly Please refer to the Setup Menu for further information 1 1 Hardware Overview The ATA has the following interfaces for Networking telephone interface LED indication and power connector 1 1 1 Two RJ 45 Networking interface these two interfaces support 10 100Mps Fast Ethernet you can connect one RJ 45 Fast Ethernet port to the ADSL or Switch and connect the other one to your computer 1 1 2 One RJ 11 Type analog telephone jack and line interfaces You can connect one analog telephone to the terminal adapter or one PSTN line 1 13 LED Indication There are three LED indicators in the ATA to show the Power Register and Off Hook indication 1 2 Software Overview SIP v1 RFC2543 v2 RFC3261 IP TCP UDP RTP RTCP IP ICMP ARP RARP SNTP TFTP Client DHCP Client PPPoE Client Telnet HTTP Server DNS Client NAT DHCP Server Ring Tone Ring Back Tone Dial Tone Busy Tone Programming Tone Phone Function Volume Adjustment Speed dial key Phone book Flash IP Assignment G 711 64k bit s PCM G 726 16k 24k 32k 40k bit s ADPCM G 729A 8k bit s CS ACELP G 729B adds VAD amp CNG to G 729 e Static IP DHCP Voice Quality e PPPoE VAD Voice activity detection Security CNG Comfortable noise generator LEC Line echo canceller
33. k RTP Port of fono 10 des Phone 0000 OSES SIP Port of E 7 Phone2 eee 10 65533 RTP Port of Phone2 foo 10 65533 Submit Reset aft Figure 18 Port Setting 3 11 5 Codec Settings you can setup the Codec priority RTP packet length and VAD function in this page You need to follow the ISP suggestion to setup these items When you finished the setting please click the Submit button If there is nothing need to change please click the Save Change Item in the left side then click the Save button The change you made will save into the system and the system will Reboot automatically Codec Settings Vote You could set the codec settings in this page Codec Priority na Codec Priority 1 6729 Phone Book Codec Priority 2 6 711 udaw y Codec Priority 3 6 711 law y Phone Setting Codec Priority 4 G 726 16 i Codec Priority 5 G 726 24 X Network Codec Priority 6 6 726 32 i Codec Priority 7 6 726 40 5 Codec Priority 8 esm M Codec Priority 9 Gsm M G 711 amp G 729 20 ms iLBC 20 ms Voice VAD Voice VAD Oon Gofr 4 a Figure 20 Codec Setting 31 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide 3 11 6 Codec ID Setting Sometimes 2 VolP device with different Codec ID will cause the interopability issue If you are talking with others got some problems you may ask the other one what kind of Codec ID he use then you can change your Codec ID Whe
34. k the Submit button If there is nothing need to change please click the Save Change Item in the left side then click the Save button The change you made will save into the system and the system will Reboot automatically Note RPort configuration for phone 2 is only supported in ATA172 Yoto RPort Setting You could enable disable the RPort setting in this page H Phone Setting RPort of a p Phone1 Sen oo Network RPort of a Phone2 Pan n Submit Reset cs al gt f Figure 23 RPort Setting 33 a ATA 171 172 171P 171M ATA S1 S2 P M User s Guide 3 11 9 Phone Setting Network Save Change Update Other Settings you can setup the Hold by RFC Voice SIP QoS and SIP expire time in this page To change these settings please following your ISP information When you finished the setting please click the Submit button The QoS setting is to set the voice packets priority If you set the value higher than 0 then the voice packets will get the higher priority to the Internet But the QoS function still need to cooperate with the others Internet devices When you finished the setting please click the Submit button If there is nothing need to change please click the Save Change Item in the left side then click the Save button The change you made will save into the system and the system will Reboot automatically Other Settings You could set other settings in this page A Hold by RFC Oon
35. must be the same as that specified on this unit Using this unit with a higher voltage than that which is specified is dangerous and may result in a fire or other type of accident causing damage WELLTECH will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is specified Sudden temperature changes and storage or operation in an extremely humid environment may cause condensation inside the unit When not planning to use this unit for long period of time i e vacation etc disconnect the AC power plug from the wall outlet Keep the unit out of reach of children When you want to dispose of the unit please follow local regulations on conservation of the environment Warranty Firmware Documents Updates ATA 171 172 171P 171M ATA S1 S2 P M User s Guide We warrant to the original end user purchaser that the products shall be confirmed to the relevant specifications and shall be free from defects in workmanship and materials for a period of one 1 year from date of purchase from the dealer Please keep your purchase receipt as it serves as proof of date of purchase During the warranty period and upon proof of purchase should the product have indications of failure due to faulty workmanship and or materials we will at our discretion repair or replace the defective products or components without charge for either parts or labor to whatever extent we deem necessary
36. n you finished the setting please click the Submit button If there is nothing need to change please click the Save Change Item in the left side then click the Save button The change you made will save into the system and the system will Reboot automatically y Codec ID Setting You could setthe value of Codec ID in this page i Codec tye E crautt value 6726 16 ID 23 95 255 M 23 Phone Book gt G726 24 ID 22 95 255 M 22 ida 6726 32 ID 2 95 255 M2 one Setting gt 6726 40 ID 21 95 255 M 21 Netan RFC 2833 ID 101 95 255 M 104 Figure 21 Codec ID Setting 3 11 7 DTMF Setting you can setup the RFC2833 Out Band DTMF Inband DTMF and Send DTMF SIP Info in this page To change this setting please following your ISP information When you finished the setting please click the Submit button If there is nothing need to change please click the Save Change ltem in the left side then click the Save button The change you made will save into the system and the system will Reboot automatically 32 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide gt DTMF Setting You could set the DTMF setting in this page A O RFC 2833 Phone Setting 5 O Inband DTMF O Send DTMF SIP Info Network gt a e v Figure 22 DTMF Setting 3 11 8 RPort Function you can setup the RPort Enable Disable in this page To change this setting please following your ISP information When you finished the setting please clic
37. nounce the current WAN inro Address 1267 None IP address of the ATA Check LAN IP IVR will announce the current LAN Info Address dail Nene IP address of the ATA IVR will announce if DHCP in Info Check IP Type 121 None enabled er disabled Check the Phone IVR will announce current in use inio Number 122 Nong VolP number Check Network IVR will announce the current ag Mask ids Nong network mask of the ATA Check Gateway IVR will announce the current me IP Address 124 Nong gateway IP address of the ATA Check Primary IVR will announce the current Info DNS Server 125 None a Setting setting in the Primary DNS field Check Firmware IVR will announce the version of the mio Version 1204 Nene firmware running on the ATA Setting Set DHCP client 41114 None The system will change to DHCP ATA 171 172 171P 171M ATA S1 S2 P M User s Guide Client type Enter IP address using numbers on Set Static IP A the telephone keypad Use the DHCP will be disabled and system Setting Address A o IHE star key when entering a decimal will change to the Static IP type point Set Network Enter value using numbers on the Setting Mask 113XXX XXX XXX XXX telephone keypad Use the star key Must set Static IP first when entering a decimal point Enter IP address using numbers on Setting Set gt ae IP 114XXxX XXX XXX XXX lec ESE a Must set Static IP first point Enter IP ad
38. nt 3 off Disable SNTP Client 4 ip1 Set SNTP Server1 IP 5 ip2 Set SNTP Server2 IP 6 mode Set SNTP Client Mode 7 zone Set GMT Time Zone hour min 8 adjust Set Adjustment Time second 9 null Show SNTP Setting 53 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide 16 vlan function Index Command Description 1 2 Show vlan Option 2 tx Tx Vlan setting 3 rX Rx Vlan setting 4 null Show Vlan Setting 17 time function Index Command Description 1 Show Time Option 2 t Modify Time hour min sec 3 d Modify date year mon date 4 null Show Data amp Time 18 mactab function is to show MAC learning table 19 dump function Index Command Description 1 Show dump Option 2 r dump r XXXXxxxx 3 W dump w XXXXxxxx XX 20 book function Index Command Description 1 2 Show book Option 2 a Show answer list 3 C Show call list 4 S speed dial 5 p phone book 21 reload function is to Reload Factory Setting please make sure you want to do the factory reset 22 watchdog function Index Command Description 1 Show WatchDog Option 2 on Enable WatchDog 3 off Disable WatchDog 4 null Show WatchDog Setting 23 phone function Index Command Description 1 Show phone Option 2 autoanswer phone auto answer 3 vol Volume setting 4 block Block In
39. ork Status You can check the current Network setting in this page y Network Status This page shows current status of network interfaces of the system a ia Type DHCP Client err gt IP 192 168 15 95 Mask 255 255 248 0 Pio Pel gt Gateway 192 168 8 254 DNS Server 1 168 95 192 1 DNS Server 2 168 95 1 1 Type DHCP Server IP 192 168 123 1 Mask 255 255 255 0 Gateway 192 168 123 1 Y DNS Server 1 168 95 192 1 DNS Server 2 168 95 1 1 Save Change 3 Si il al Figure 12 Network Status ATA 171 172 171P 171M ATA S1 S2 P M User s Guide 3 7 3 y Phone Book Phone Setting Save Change 1 WAN and LAN Settings If you change the WAN port s setting to Fix IP Mode then you have to make sure the IP address Net Mask Gateway and DNS setting is suitable in your current network environment The WAN port is DHCP Client mode You can change the setting to Fixed IP or PPPoE Mode NOTE WAN port IP address is in DHCP mode by default please use 126 to hear WAN port get IP address If you change the WAN port s setting to PPPoE Mode you have to input a correct username password to get the IP address from your Internet Service Provider The LAN port s default IP address is 192 168 123 1 Net Mask is 255 255 255 0 and DHCP Server enabled The start IP address if 150 end IP adress is 200 It is not necessary to change the LAN settings You can connect your PC to the LAN port set your PC as DHCP Cl
40. ost of the VolP applications are work with a SIP Proxy Server When you finished the setting please click the Submit button If there is nothing need to change please click the Save Change Item in the left side then click the Save button The change you made will save into the system and the system will Reboot automatically DDNS Settings You could set the configuration of DDNS in this page A DDNS Oon Gof r Host Name User Name Password E mail Address DDNS Server DDNS Server List Type Wild Card BACKMX On Off Off Line On Off Figure 15 DDNS Setting 24 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide 3 7 5 Phone Book Phone Setting Save Change VLAN Setting You can set the VLAN setting in this page There are two parts in this page First one is to set the packets related to the TA and the second parts is if you use the VLAN setting in the NAT Mode There are two kind of destination packets will come from the TA s WAN port one kind of packets will go to the TA the other will go through the LAN port to the PC VLAN Packets if you enable the first VLAN Packets and set the VID User Priority and CF then all the incoming packets will be check with the IP Address and the VID VID You can follow your service provider to set your VID User Priority Defines user priority giving eight 23 priority levels IEEE 802 1P defines the operation
41. ou have done If you want to use new setting in the ATA You have to click the Save button After you click the Save button the ATA will automatically restart and the new setting will effect y OLE Save Changes You have to save changes to effect them SIP Settings El Save Changes _Save NAT Trans Others System Auth Save Change Update Reboot Figure 31 Save Change 44 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide 3 17 Update Rom firmware 3 17 1 In Update you can update the ATA s firmware to the new one or do the factory reset to let the ATA back to default setting 3 17 2 In New Firmware function you can update new firmware via HTTP in this page You can ugrade the firmware by the following steps 1 Select the firmware code type ROM code 2 Click the Browse button in the right side of the File Location or you can type the correct path and the filename in File Location blank 3 Select the correct file you want to download to the ATA then click the Update button 4 After finished the update firmware process the system will Reboot automatically HE OD E http 192 168 15 201 9999 update htm Update System You could update your system in this page A Update Type ALL ROM y Phone Book gt File Location al Phone Setting Update Reset Network Figure 32 Update Firmware 45 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide 3 17 3 In Default
42. page If you change the setting in the Web Management interface please do remember to click the Submit button in that page After you finished the change of the setting click the Save function in the left side and click the Save Button When you finished the setting please click the Reboot function in the left side and click the Reboot button in that page After the system restart all the setting can work properly ATA 171 172 171P 171M ATA S1 S2 P M User s Guide 3 2 System Information for the ATA 3 2 1 3 2 2 When you login the web page you can see the ATA current system information like firmware version company etc in this page Also you can see the function lists in the left side You can use mouse to click the function you want to set up y OLE System Information This page illustrate the system related information Phone Book Model Name VolP r Firmware Version Fri Apr 7 17 20 50 2006 Phone Setting Codec Version Tue Apr 04 10 36 25 2006 gt Network gt SIP Settings i NAT Trans R Others gt Swetam Anth zll gt Figure 1 System Information 3 3 Phone Book In Phone Book page contains from page 1 14 Phone show serial number Name setting other side telephone number URL other side IP address Example S 0 1 0700000020192 168 15 210 O When you dial 1 the device should search phone book if search match number 1 will send out 0700000020 192 168 15 210
43. please click the Submit button 1 12 If there is nothing need to change please click the Save Change Item in the left side then click the Save button The change you made will save into the system and the system will Reboot automatically 29 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide Service Domain Settings aj You could set information of service domains in this page Phone Setting R Network Phone No Phone 1 gt Realm 1 Default ice Active On cof Display Name 0702060651 User Name 0702060551 Register Name 0702060551 Register Password Domain Server 218 32 223 185 8088 Proxy Server 218 32 223 185 8088 4 gt Figure 17 Service Domain Setting 3 11 4 Port Settings you can setup the SIP and RTP port number in this page Each ISP provider will have different SIP RTPport setting please refer to the ISP to setup the port number correctly When you finished the setting please click the Submit button If there is nothing need to change please click the Save Change Item in the left side then click the Save button The change you made will save into the system and the system will Reboot automatically Note SIP and RTP Port settings for phone 2 is only supported in ATA172 30 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide Port Settings You could set the port number in this page Phone Setting SIP Port of Phone 6060 10 65533 Networ
44. r demilitarized zone setting in this page DMZ DMZ Host IP Oon Dor DMZ Default setting is Off not executed When activated all packets excluding SIP related packets will be sent to the designated IP address DMZ Host IP Input the special IP address of the DMZ host Submit Button Reset Button Saves the configuration Erases the configuration 27 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide 3 10 PPTP Settings PPTP Settings You could set the PPTP server in this page PPTP Oon Gofr PPTP Server PPTP Username PPTP Password PPTP Default setting is Off not executed When set to On executed PPTP function will be activated PPTP Server Input the IP address of the PPTP server s location PPTP Username Input the username login details PPTP Password Input the password login details Submit Button Reset Button Saves the configuration Erases the configuration 28 3 11 w w ATA 171 172 171P 171M ATA S1 S2 P M User s Guide SIP Settings 3 11 1 h h w N A In SIP Settings you can setup the Service Domain Port Settngs Codec Settings RTP Setting RPort Setting and Other Settings If the VolP service is provided by ISP you need to setup the related informations correctly then you can register to the SIP Proxy Server correctly Subscribe for MWI this function is offer voice mail not
45. release the hold off B and continue the original conversation 42 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide 3 14 MAC Clone setting MAC Clone Setting You could enable disable the MAC clone setting in this page MAC Clone Con of Submit Reset MAC Clone setting This function changes the MAC Addresses of workstations in a LAN to which that are identical to the WAN port this is done due to the fact that some ISP companies restrict the use of multiple MAC Addresses through PPPOE connect LAN port PC MAC Address to device WAN Port let your PC MAC address with your device are same MAC Because some ISP company should lock PPPoE MAC Address 3 15 System Auth 3 15 1 In System Authority you can change your login name and password When you finished the setting please click the Submit button If there is nothing need to change please click the Save Change Item in the left side then click the Save button The change you made will save into the system and the system will Reboot automatically y fale System Authority You could change the login username password in this page EJ NAT Trans New username Others New password Confirmed System Auth password Save Change Reset Updat pdate z Reboot gt 4 gt Figure 30 System Authority 43 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide 3 16 Save Change 3 16 1 In Save Change you can save the changes y
46. rom the ATA s LAN port to a hub or switch while making sure that your computer is also connected to the same hub or switch Step 2 Make sure you set your computer s network setting to DHCP mode obtain IP address automatically This is done in the Network Connections option that can be accessed in Control Panel Step 3 Open your web browser and in the address field input the following IP address http 192 168 123 1 9999 The diagram below will show you an example of the web page menu 4 VoIP Login Microsoft Internet Explorer BRO SED RAM HORE IAM RAG ay Qui ad e frome O OS 20 193 HEO El http 11192 168 123 1 0999 pzz ia gt http 192 168 123 1 9999 LAN Port s default IP Login VoIP Enter your username and password to login VolP server Username Password Figure 1 Login Page amp al 6 fi E E 3 1 Login 3 1 1 Please input the username and password into the blank field The default setting is 1 For Administrator the username is root and the password is test If you use this account to login you can configure all the setting 2 For normal user the username is user and the password is test If you use this account to login you will not be able to configure any SIP settings due to authorization level ATA 171 172 171P 171M ATA S1 S2 P M User s Guide Click the Login button will move into the ATA web based management information
47. ry DNS server 8 dns1 Set Secondary DNS server 9 dr Set Default Route 10 nat Set NAT 11 on Enable Interface 12 off Disable Interface 13 dhcps DHCP Server Setting 14 ddns Set DDNS 15 bridge Set Bridge 16 dev0 Set Device 0 Setting 17 dev Set Device 1 Setting 18 dev2 Set Device 2 Setting 19 null Show Interface Setting 4 save function Index Command Description 1 Show save Option 2 book Save phone book 3 SyS Save system setting 5 reboot function is to restart the system 6 exit function is to exit the CLI 7 debugmode function is to enter the debugmode 8 update function Index Command Description 1 2 Show update Option 2 OS Update OSImage IP filename 3 dsp Update DSP Image IP filename 4 all Update All Image IP filename 5 server Update Server IP filename length 6 pcm PCM IP filename alaw alaw IP filename ulaw ulaw IP filename 9729 9729 IP filename 9726 16 9726 16 IP filename 9726 24 9726 24 IP filename 9726 32 9726 32 IP filename 9726 40 9726 40 IP filename IP is the TFTP server s IP address and the filename is the image you want to download into the system 51 ATA 171 172 171P 171M ATA S1 S2 P M 9 auth function User s Guide Index Command Description 1 Show auth Option 2 admin Change A
48. set between 0 8 3 You can choose to disable or enable PIN code feature When a PIN code is set on the ATA device once the auto answer counter value is encountered for example 3 rings you will hear a continuous series of beeps the caller then must specify the PIN set followed by the hash key to dial out and transfer to the second line If the original call is IP then it will be dialed out to PSTN and vice versa 13 3 4 7 1 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide Auto Answer You could enable disable the auto answer in this page A Auto Answer Oon O Auto Answer Counter 0 8 PIN Code Enabled O0n Gofr PIN Code v gt Caller ID function you can set the device to show Caller ID in your PSTN Phone or IP Phone There are four selection of Caller ID You need to base on your environment to set the Caller ID function for FSK or DTMF When you change the setting please also double check the PTT seting in Others You need to choose the correct country code then the Caller ID will be effect When you finished the setting please click the Submit button If there is nothing need to change please click the Save Change Item in the left side then click the Save button The change you made will save into the system and the system will Reboot automatically Caller ID Setting You could enable disable the caller ID setting in this page Caller ID Caller
49. tablishes a conversation channel by answering the incoming ring tone when A hangs up during the conversation with C the call is transferred where B and C will be in the same conversation channel allowing them to talk to each other Note For 171M if the transfer is performed from IP to PSTN then the command used is 514 If the call is performed from PSTN to IP no access code is needed when flash is pressed on the phone set connected to the ATA the original caller will hear a dial tone provided by IP and continue the dialing process 3 13 10 3 way Conference B calls A A and B establishes a connection and during the conversation A would like to add another third party to the conversation A holds the conversation channel with B presses 512 then keys in the number of the third party After that A presses the hash symbol to initiate the call to the third party C Once C accepts the incoming call A will then press the function button flash to enable the 3 way calling mode where all three parties can now talk to one another 3 13 11 Call Waiting Answering a Call on Waiting During the conversation between A and B another third party C calls A which A will notice from the call waiting tone that can be heard from A s side of the conversation channel A will then hold B on standby while switching to a different line in order to communicate with C If B is still on hold and A would like to talk to B again A can
50. then all the incoming call will direct forward to the speed dial number you choose Note PSTN forwarding is only supported in ATA171M Busy Forward If you are on the phone the new incoming call will forward to the number you choosed You can input the name description and the phone number in URL field No Answer Forward If you can not answer the phone the incoming call will forward to the number you choosed You can input the name description and the phone number in URL field Also you have to set the Time Out time for system to start to forward the call to the number you choosed Note PSTN forwarding is only supported in 171M When you finished the setting please click the Submit button If there is nothing need to change please click the Save Change Item in the left side then click the Save button The change you made will save into the system and the system will Reboot automatically 10 Phone Book gt la 3 4 3 Iw ik ATA 171 172 171P 171M ATA S1 S2 P M User s Guide Forward Setting You could set the forward number of your phone in this page All Forward of OIP OPSTN Busy Forward of OIP No Answer Forward Oof OIP OPSTN NONI HE IET All Fwd No J Busy Fwd No L L No Answer Fwd No No Answer Fwd Time Out 3 2 8 Ring Figure 3 Forward Setting SNTP Setting function you can setup the primary and second SNTP Server IP Address to
51. tion If you dial a number that has a prefix matching 12 the device will automatically append the number 009 in front of the dialed number therefore the number that will be dialed out is 009 12 xxx 16 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide 4 Drop prefix No Replace rule 4 007 5xxx 35xx 21xx Explanation This replacement rule will check if the first digit of the number is 5 followed by any three digits if 5 D it is the device will automatically append 007 to the dialed number Therefore the number that will be dialed out is 007 5xxx This rule will also check whether the first two digits of the number dialed by the user is 35 or 21 followed by any two digits if it matches the device will automatically append 007 to the dialed number Therefore the number that will be dialed out is 007 35xx or 007 21xx correspondingly However if the user dials a number that does not match the rule for instance 534 the device will detect that only 2 digits were inputted to the end of the digit 5 not three as a result the device will only dial the number 534 without appending 007 Likewise if the number dialed does not match any of the prefix rules only the original number will be dialed Auto Dial Time 5 Explanation While dialing a number once the user stops pressing the keypad for 5 seconds the device will commence the dialing process For example if the user dials 58946869 and stops dialing for 5 seconds
52. urationand set the Server IP address in this page This function can automatically download the configure file to setup your TA 3 13 3 When you finished the setting please click the Submit button 3 13 4 If there is nothing need to change please click the Save Change Item in the left side then click the Save button The change you made will save into the system and the system will Reboot automatically 35 ATA 171 172 171P 171M ATA S1 S2 P M User s Guide Auto Configuration Setting You could enable disable the auto configuration setting in this page Auto Configuration of OTFTP O FTP OHTIP TFTP Server HTTP Server HTTP Path FTP Server FTP Username FTP Password File Path Figure 206 Auto Configuration Setting Auto Configuration Default setting is Off not executed Specify the methods on how auto configuration will be performed the options are TFTP FTP or HTTP TFTP Server Set the TFTP Server s location you can input IP address or Domain Name information in this text box HTTP Server Set the HTTP Server s location you can input IP address or Domain Name information in this text box HTTP Path Specify the path to store data for e g 123 FTP Server Set the FTP Server s location you can input IP address or Domain Name information in this text box FTP Username Enter the relevant Username to log on to the FTP Server FTP Password Enter the relevant password associ
53. vice it can avoid haker try to attack the device When you finished the setting please click the Submit button If there is nothing need to change please click the Save Change ltem in the left side then click the Save button The change you made will save into the system and the system will Reboot automatically yatp Phone Book Phone Setting Network SIP Settings NAT Trans ATA 171 172 171P 171M ATA S1 S2 P M Advanced Setting You could change advanced setting in this page ICMP Not Echo Send Anonymous CID Management from WAN Billing Signal CPC Delay CPC Duration Send Flash event SIP Encrypt PPPoE retry period System Log Server System Log Type OYes ONo OYes ONo OYes ONo saes El 2 2 5 Seconds o x10MS 0 120 Disabled by Disabled Y E Seconds None w Figure 218 Advanced Setting 39 User s Guide ATA 171 172 171P 171M ATA S1 S2 P M User s Guide ICMP Not Echo Default setting is No do not activate will not be responded Once activated all ping messages Send Anonymous CID Default setting is No do not activate Once activated the device will not send its own number Management from WAN Once activated the device will Only supported in Default setting is Yes do not activate restrict users to connect to it s WAN port Note ATA171m Billing Signal Default setting is Disabled do not activate Once activated the
Download Pdf Manuals
Related Search