Home

kee hing cheung kee co., ltd. dlftz chang hing kee int`l industry

image

Contents

1. DLFTZ CHANG HING KEE INT L INDUSTRY amp TRADE CO LTD F 2 KHCK MDD 003 Walk through Metal Detector Technical Parameter Electric current 220V Power lt 30W Outer frame 2220mm h X790mm w x522mm d Inner frame 2000mm h X700mm w Xx522mm d Net Weight about 70kg Work environment 20 C 45 C Complied standard GB15210 2003 H 11l digital metal detecting gate is adjustable In the highest volume articles as small as a paper clip can be detected and located The user can configure the gate according to the size and weight of the article for detection to exclude error alarm for coins keys jewelries belt buckles etc It is applicable in the places such as factories mines banks luxuries houses etc where expensive metal articles may get lost easily and places such as airport exhibition halls where dangerous metal articles customhouse jails are prohibited OEM amp ODM are welcome with product Function and characteristics 1 Displaying panel Adopting the ultra large LED displaying panel convenient for the work of the operator 2 Six detecting areas Allocation of six mutual over lapping detecting areas simultaneous alarming from multi areas and accurately ascertaining the location of the metal articles according to the layout of the metal articles 3 Indication of the alarming areas The LED monitor embedded at both the left and right sides of the gate leaf can accurately indicate the proh
2. Simple convenient to use easy to adjust OEM amp ODM are welcome Sensitivity Adjustment 1 The sensitivity shall be adjusted when performance instability is observed or sound is produced when detecting human body without any metal stuff because requirement or the sensitivity is too high 2 Insert a small straight shaped screw driver into the small hole of the handle of the detector and rotate clockwise until a sound is heard then rotate counter clockwise barely to the position where no sound is produced then rotate for another half a circle until the sensitivity meets the requirement NOTE 1 Be sure to switch off the power after use battery shall be taken out when the detector will be kept unused for long 2 No sound will be produced when the probe is fixedly positioned to the metal object Sound is produced only when the probe crosses the metal object 3 Be sure to switch off the power when the battery is recharged 4 Charger voltage 9V for AC 10V for DC The charger shall be self provided KEE HING CHEUNG KEE CO LTD DLFTZ CHANG HING KEE INT L INDUSTRY amp TRADE CO LTD F oP KHCK MDU 001 Underground Metal Detector Main parameter Power supply DC12V Shooting frequency 6 99Khz Signal frequency 437KHz Visual Lever Meter Indicator sound 2 Speaker or earphone earphone not included Disc Ground Balance Controls Disc Control Ground Balance control Tune control sensitivity control Di
3. detection inspection at airports railway stations and wharfs 2 Security inspection of customs public securities 3 Quality inspection of medicine and food commercial systems 4 Security inspection of important sites and playgrounds 5 Noble metal detection such as gold or silver jewelry manufacturing plants Features Detection distance 1 Pin 30 60mm 2 64 model handgun 150mm 1 Highly sensitivity Simple and convenient to use no adjustment is required 3 6 inch long knife anna 2 The detection distance will not be changed when the battery voltage drops from 9V to about 7V Low power consumption can work for 40 hours 4 Diameter 20mm 5 Steel Ball 90mm continuously 3 There is automatic and continues alarm when the battery is used OEM amp ODM are welcome up Switch on off audio prompt function 4 With external rechargeable socket hole has audio Light and vibration handoff switch Install and replace battery 1 The battery lid can be opened by pushing backward with thumb at the concave groove 2 Install the 6F22 9V battery according to the anode and cathode signs on the battery lid 3 Cover with the battery lid and push forward firmly Method to use 1 Turn on the power switch if a click sound is heard it indicates that the power has been connected and the green LED will turn on at the same time If no click sound is heard it indicates that no battery has been installed or the battery is not well connec
4. problem it will give a messenger on the wrong 6 Micro processing technology The micro processing system gives an automatic jump to the controlling part of the system Now you can set the system and its flexibility in the controlling panel easily 7 Complex circuit infrared installation and computer automatic identification decrease the mistakes and missing dramatically lt can automatically show the alarm frequency and numbers of passed people 8 The digital filtering system of DSP signal processing offers high ability to resist electromagnetic interference touch and impaction which makes the door can be used in crowded area 9 Adjustable Flexibility We can reach the security requirements by adjusting the flexibility There are 100 flexibility degrees in each detective area 10 Automatic saving and showing ambient disturbed condition making for choosing fabricating yard 11 Continuous work and impossibility of escaping from detection at any time 12 Password protection setting You can change the system flexibility and other setting only after typing in the pass word correctly and only authorized person allowed to change the 13 Adoption of weak magnetic field launching technology will not cause harm to heart pacemaker wearer pregnant women disks and videos 14 Warranty Limited 12 months 30 additional parts provide for abrasion labor instruction is available if qty up to 100PCS KEE HING CHEUNG KEE CO LTD
5. G KEE CO LTD DLFTZ CHANG HING KEE INT L INDUSTRY amp TRADE CO LTD KHCK MDH 001 HAND HELD METAL DETECTOR Product parameter 1 Dimension 410mm 85mm 2 G W 12KG ctn 20pcs 2 Power Source standard 9v over lapping battery 3 Alarm mode sound light alarm simultaneously 4 Weight 500g OEM amp ODM are welcome Function Easy and convenient to operate The manual part makes anti smoothly design Two sides both alarm with flashing red light when detecting metal articles Low battery waste no waste when stop working below 1mA when working Super high accuracy and sensitivity that be able to detect very small metals up to 0 1g The system be able to inspect power source and battery failure power insufficient N OO fF WD Alarm in different sounds according to different metals and connect earphone available in harmonious surroundings Features KHCK MDH 001 is a kind of small Hand Held Metal Detector which is a special machine to security inspection This machine is convenient to use no adjustable controller quickly reaction when detecting metals and sound and light simultaneous alarming It would sound clearly in low frequency when detecting small metal lt would sound clearly in high frequency when detecting big metal KEE HING CHEUNG KEE CO LTD DLFTZ CHANG HING KEE INT L INDUSTRY 8 TRADE CO LTD KHCK MDH 002 Hand Held Highly Sensitive Metal Detector Application 1 Electronic
6. HEUNG KEE CO LTD DLFTZ CHANG HING KEE INT L INDUSTRY 8 TRADE CO LTD F oP KHCK MDH 003 HAND HELD METALDETECTOR Features and Functions F Ss 1 Operating frequency 20 kHz LO 2 Weight 272g including the battery WA 3 Size a Length 420mm b Width 138mm c Height 110mm 4 Handle measurement 30 x 30mm 5 Regulate the way manual 6 Indicator BZ vibration motor Detecting distances 7 LED light proves LED red warning indicator lamp LED green a 1 2 pin 10mm insufficient indicator lamp voltage indicator lamp LED battery of b Model 64 pistol 150mm power c 6 dagger 150mm 8 Battery 9V battery suitable for working for 40 hours normally d 8mm diameter 40mm 9 Control circulation switch On Off a sound of light or mode of e Aluminum amp copper sheet 10mm vibration f DIP14 IC integrate circuit 5mm 10 Uses cycle switch to switch sound alarm and hidden vibration g Silver ring 1g 40mm alarm respectively h Lead brick 1g 30mm 11 Highly sensitive detect ferrous and non ferrous and stainless steel weapons OEM amp ODM are welcome 12 Sound and light alarm simultaneously 13 Alkaline cell 7V 9V can work over 40 hours and distance does not change 14 Warn automatically when short of voltage 15 Simple convenient to use easy to adjust Sensitivity Adjustment 1 The sensitivity shall be adjusted when performance instability is observed or sound is produced when detecti
7. It can be used in the factory prison court exhibition hall stadium entertainment lieu etc where the prohibited articles need to be checked for safety 12 Warranty 12 months 30 additional parts provide for abrasion labor instruction is available if qty up to 100PCS 3 KEE HING CHEUNG KEE CO LTD DLFTZ CHANG HING KEE INT L INDUSTRY amp TRADE CO LTD KHCK MDD 004 Security Walk Through Metal Detector pr i Ge E he E m E E ia rm Io E pm _ E 4 Technical Parameter Outer frame 2 2 X0 79 X0 54m H X W X Depth Inner frame 2 0X0 7X0 540m H X W X Depth Electric current 220V Power 35VA Net Weight about 80kg Work environment 20 45 Standard GB15210 2003 OEM amp ODM are welcome passed through the detector the number of alarms Function and Characteristics 1 Easy Assembly The modular design allows for a quick and very simple assembly Only 8 eight screws are required for 2 18 Distinct Detection Zones Offering exclusive multiple targets pinpointing with 18 distinct zones for full target coverage on the left center and right side of the body from head to toe 3 Entry Pacing Lights Smooth efficient traffic flow with easy to view eye level pacing lights on the entrance side of each panel 4 Overhead Control Unit LCD Display alarm lights LED bar graphs and control touchpad plus all wiring connections and electronics are integrated into the overhead
8. KEE HING CHEUNG KEE CO LTD DLFTZ CHANG HING KEE INT L INDUSTRY 8 TRADE CO LTD METAL DETECTOR GE KEE HING CHEUNG KEE CO LTD DLFTZ CHANG HING KEE INT L INDUSTRY 8 TRADE CO LTD KHCK MDD 001 Walk through Metal Detector Function and characteristics 1 Six detecting areas Allocation of six mutual over lapping detecting areas adopt the advanced digital pulse technology both side of the gate can transmit and receiving the signal can eliminate the false alarm areas and accurately determine the location of the metal objects 2 Indication of the alarming areas The monitor can accurately indicate the prohibited articles which are hidden at the places of human body with corresponding height The alarming areas can be indicated by the column lamps at the right side of operation panel 3 Adjustable area sensibility With the highest sensibility it can detect the metal article as small as one coin With the range of 0 99 it can automatically adjust the sensibility according the weight volume and location of the metal parts and eliminate the false alarming for the coin key jewelry leather belt buckle Technical specifications Electric current 220V Power 35VA etc N o Outer frame 2200mm h X790mm w X540mm d 4 High capability of anti interference The adoption of Inner frame 2000mm h X700mm w X540mm d digital analogy and left and right balanced technology Net Weight about 80kg can prevent fals
9. compartment 5 Audible and Visual Alarms Audible alarm and Visual LED lights signal when a target has been detected 6 High adjustable sensitivity KHCK MDD series digital scanner gate is adjustable In the highest volume articles as small as a paper clip can be detected and indicated 7 Password protection KHCK MDD 004 is designed for use by authorized personnel with multi level security codes It only allows authorized users to change settings 8 No battery is required for memory retention maintains all settings even when disconnected from power and does not require recalibration each time the unit is turned OFF and back ON No battery is required for memory retention While the unit is in operation a self test of all systems is performed continuously with any failures or problems immediately reported on the LCD display 9 Hum less to human body Using sensitive metal detecting technology is harmless to heartbeat implement in human body magnetic software tapes and video recording tapes 10 Traffic Counter Counter tracks the number that have 11 Synchronization Dual channels and DSP circuitry allow several KHCK MDD 004 series scanner gates to operate simultaneously in close proximity to one another 12 Warranty Limited 12 months 30 additional parts provide for abrasion labor instruction is available if qty up to 100PCS 13 Optional accessories Remote control ABS plastic base for protection KEE HING CHEUN
10. criterion national standard amp 12298 GB 15210 2003 General Specification of walk through metal detector amp 12299 2 Detecting process 100 degrees of sensitivity to meet with requirements in various occasions 3 Basic safety meet the requirements of GB4793 4 5 6 4 Personal safety meet the requirements of NILECJ 0601 5 percent of pass above 60 meantime minute 6 Electrical source 220v AC 50 60 Hz 7 Power 35VA 8 Working environment 30 C 45 C lt 95 RH a A a o ca co 9 Overall sizes mm 2200 height x 790 width x 540 depth 10 Size of alley mm 2000 height x 700 width x 540 depth 11 Weight about 80kg OEM amp ODM are welcome setting can t change the settings Function and Character 1 The door is anti corruption moisture proof and fire proof 2 The door is formed in one piece steady robust and long service life easy to be conveyed mounted and dismounting 3 No blind area and each spot of search coverage are evenly detected 4 Accurate location 6 independent distributing search coverage and acousto optic alarm when target is found Panel indicator light directly displays the alarming area which can exactly indicate the target 5 Self diagnose function There is a self diagnose system in the door It will cheek the hard ware and software of the door automatically whenever the door is activated When there is a
11. derground can be detected 2 Strong pinpointing performance Can penetrate the earth the stone the chinaware or other plastic and wooden material which covered on the metal and find the metal Battery B1 group 2pcs 9V exactly B2 group 9V 3 Great discrimination _ Work frequency 15 KHz 2 2 KHz 4 Easy operation Display instrument panel 5 Mainly function a Suitable to detect and distinguish metal buried in the earth Sound loudhailer or earphone Working electricity B1 18V 30mA B2 9V 35mA b Suitable for checking metal in food fuel Working Volt B1 12 24 5V and luggage B2 6 11 5V c Suitable for detecting underground pipes Three frequencies 400Hz 60Hz d Suitable for mining and archeological digs 700Hz 105Hz 6 Have the function to distinguish ferrous and 1500Hz 225Hz Non ferrous Metal Dimension 920 1210mm L 200mm W 185mm H 7 Adopt the intellectualized operation system 8 Use the high strength material of ABS with light weight and long life span 9 To distinguish if it s the sound of ferrous via the earphone Packing Each piece in one inner box amp 4pcs in one outer carton Outer Carton measure 840mm 320mm 640m 11
12. e or omitted alarming which greatly Work environment 20 C 45 C enhance the capability of anti interference 5 Protection with password The protection from the OEM amp ODM are welcome password can only allow the authorized person for the operations It is highly safe 6 Functions of statistic counting The intelligent counter can calculate the number of the passenger flow and the times of alarming 7 Harmless to human body Adopt the technology of low electromagnetic to transmit the product is harmless to heartbeat of human body pregnant women magnetic software tapes and video recording tapes 8 Power safety The power device for the product is installed at the top of the main unit The power supply can be controlled by the operation panel 9 Convenience in installation KHCK MDD series products adopt integration design It only takes twenty minutes to install the gate The User s Manual are attached with the product 10 Application scope It can be used in the factory prison court exhibition hall stadium entertainment lieu etc where the prohibited articles need to be checked for safety 11 Standard GB15210 2003 12 Warranty Limited 12 months 30 additional parts provide for abrasion labor instruction is available if qty up to 100PCS KEE HING CHEUNG KEE CO LTD DLFTZ CHANG HING KEE INT L INDUSTRY 8 TRADE CO LTD KHCK KHCK MDD 002 Walk through Metal Detector Technical Parameter 1 Meet a
13. ibited articles which are hidden at the places of human body with corresponding height The alarming areas can be indicated by the column lamps at the both left and right gateposts 4 Adjustable area sensibility With the highest sensibility it can detect the metal article as small as the clip With the range of 0 99 it can automatically adjust the sensibility pre set the weight volume size and location in respect of the metal articles and eliminate the false alarming for the coin key jewelry leather belt button etc 5 High capability of anti interference The adoption of digital analogy and left and right balanced technology can prevent false or omitted alarming which greatly enhance the capability of anti interference 6 Protection with password The protection from the password can only allow the authorized person for the operations It is highly safe 7 Functions of statistic counting The intelligent counter can calculate the number of the passenger flow and the times of alarming 8 Harmless to human body The product is harmless to heart pacemaker installed in human body pregnant women magnetic floppy recording tapes etc 9 Power safety The power device for the product is installed at the top of the main unit The power supply can be controlled by the operation panel 10 Convenience in installation KHCK MDD series only takes twenty minutes to install the gate User s Manual are attached 11 Application scope
14. ng human body without any metal stuff because requirement or the sensitivity is too high 2 Insert a small straight shaped screw driver into the small hole of the handle of the detector and rotate clockwise until a sound is heard then rotate counter clockwise barely to the position where no sound is produced then rotate for another half a circle until the sensitivity meets the requirement NOTE 1 Be sure to switch off the power after use battery shall be taken out when the detector will be kept unused for long 2 No sound will be produced when the probe is fixedly positioned to the metal object Sound is produced only when the probe crosses the metal object 3 Be sure to switch off the power when the battery is recharged 4 Charger voltage 9V for AC 10V for DC The charger shall be self provided KEE HING CHEUNG KEE CO LTD DLFTZ CHANG HING KEE INT L INDUSTRY 8 TRADE CO LTD F 2 KHCK MDH 004 Hand Held Highly Sensitive Metal Detector Spec and functions Working current lt 5mA Frequency 35 KHz Probe diameter 134mm Weight 230g 1 Highly sensitive detect ferrous and non ferrous and stainless steel weapons Handheld Detection range 20cm 2 Sound and light alarm simultaneously Length 40cm operating 20cm storing 3 Alkaline cell 7V 9V can work over 40 Detecting distance hours and distance does not change Coin 70mm 4 Warn automatically when short of voltage lron pipe detecting distance 120mm 5
15. scrimination Control Zeroing control Working electric current 300MA at Max Volume Sensitivity 35cm or a US 25cent Quarter with meter Indication at min discrimination Accessories Battery box and battery bag Gross weight 3 2kg Color Black OEM amp ODM are welcome Features 1 Good detection depth 1 5 2m 2 Strong pinpointing performance Can penetrate the earth the stone the chinaware or other plastic and wooden material which covered on the metal and find the metal exactly 3 Great discrimination 4 Easy operation 5 Mainly function a Suitable to detect and distinguish metal buried in the earth b Suitable for checking metal in food fuel and luggage c Suitable for detecting underground pipes d Suitable for mining and archeological digs 6 Have the function to distinguish ferrous and Non ferrous Metal 7 Adopt the intellectualized operation system 8 Use the high strength material of ABS with light weight and long life span 9 To distinguish if it s the sound of ferrous via the earphone Packing Each piece in one inner box amp 4pcs In one outer carton Outer Carton measure 840mm 320mm 640mm KEE HING CHEUNG KEE CO LTD DLFTZ CHANG HING KEE INT L INDUSTRY 8 TRADE CO LTD KHCK MDU 002 OEM amp ODM are welcome Features 1 Good detection depth 3 5m max detection depth 2 Strong pinpointing performance Can penetrate the earth the stone the chinaware or other pla
16. stic and wooden material which covered on the metal and find the metal exactly 3 Great discrimination 4 Easy operation Main parameter 5 Mainly function Power supply DC12V a Suitable to detect and distinguish metal Shooting frequency 6 99 KHz buried in the earth Signal frequency 437 KHz b Suitable for checking metal in food fuel Visual Lever Meter and luggage Indicator sound 2 Speaker or earphone earphone not Suitable for detecting underground pipes d Suitable for mining and archeological digs included Disc Ground Balance Controls 6 Have the function to distinguish ferrous and Disc Control Ground Balance control Non ferrous Metal _ Tune control sensitivity control 7 Adopt the intellectualized operation system Discrimination Control 8 Use the high strength material of ABS with Zeroing control light weight and long life span Working electric current 300MA at Max Volume 9 To distinguish if it s the sound of ferrous via Sensitivity 35cm or a US 25cent Quarter with meter the earphone Indication at min discrimination Accessories Battery box and battery bag Packing Each pieces in one inner box amp Gross weight 3 2kg 4pcs in one outer carton Color Black Outer Carton measure 840mm 320mm 640mm 10 KEE HING CHEUNG KEE CO LTD DLFTZ CHANG HING KEE INT L INDUSTRY 8 TRADE CO LTD KHCK MDU 003 1 Good detection depth metal detector and identify statoscope one 25 cent which 16 cm un
17. ted If the click sound is heard one after another it indicates that the battery can not be used any more and a new battery shall be installed 2 When the switch on click sound stops the highly sensitive detection can be performed Grasp the handle and detect with the detection face around the object being detected there will an alarm when a metal object is detected In the mean time the green LED will turn into red When the detection stops the alarm stops and the red LED turns into green Sensitivity Adjustment 1 The sensitivity shall be adjusted when performance instability is observed or sound is produced when detecting human body without any metal stuff because requirement or the sensitivity is too high 2 Insert a small straight shaped screw driver into the small hole of the handle of the detector and rotate clockwise until a sound is heard then rotate counter clockwise barely to the position where no sound is produced then rotate for another half a circle until the sensitivity meets the requirement NOTE 1 Be sure to switch off the power after use battery shall be taken out when the detector will be kept unused for long 2 No sound will be produced when the probe is fixedly positioned to the metal object Sound is produced only when the probe crosses the metal object 3 Be sure to switch off the power when the battery is recharged 4 Charger voltage 9V for AC 10V for DC The charger shall be self provided 6 KEE HING C

Download Pdf Manuals

image

Related Search

Related Contents

  Rotex Istruzioni di funzionamento e montaggio  Lichtsteuerungen, Dimmer & DMX-Peripherie  HP Pavilion dv6-6c59ea  Philips 5500 series 46PFL5507H 46" Full HD 3D compatibility Smart TV Wi-Fi Silver  Attix5 Pro Storage Platform User Manual  Téléchargez le En écho à Rendez  取扱説明書  Agri-Fab 45-0418 Snow Blower User Manual    

Copyright © All rights reserved.
Failed to retrieve file