unknown, 1, en_GB
Contents
1. Press the M button Press one of the arrow keys repeatedly until the display shows DMX Press the OK button Now you can set the number of the first DMX channel to be used by the device DMX address Use the arrow keys to select a value between 1 and 512 the display shows A001 A512 When the display shows the desired value press the OK button to confirm the selection Then press M to return to the higher menu level To return to the higher menu level without changes press the M button Make sure that this number matches the configuration of your DMX controller The following table shows the highest possible DMX address for the different DMX modes Mode Highest possible DMX address 4 channel 509 6 channel 507 8 channel 505 LED PAR 24 Operating mode Show Master Operating mode Slave Operation Press the M button Press one of the arrow keys repeatedly until the display shows LINE Press the OK button Press one of the arrow keys repeatedly until the display shows MA Press the OK button Now you can select one ofthe preprogrammed automatic shows Use the arrow keys to select a value between 1 and 42 the display shows P 01 P 42 The automatic show can only be activated on the device that operates as Master This setting is only relevant if the device is not controlled via DMX The device can operate in standalone mode or control connected dev2. or select the flash rate in a range from 0 to 24 This operating mode can also be used to create constant or flashing light mixed from the four LED colours without using a DMX controller When the display shows the desired value press the OK button to confirm the selection and then M to return to the higher menu level To return to the higher menu level without changes press the M button Fade speed Press the M button Press one of the arrow keys repeatedly until the display shows FADE Press the OK button Now you can set the fade speed of the preprogrammed automatic shows Use the arrow keys to select a value between 1 and 7 the display shows F 07 F 07 This setting is only relevant if the device is not controlled via DMX When the display shows the desired value press the OK button to confirm the selection and to return to the main menu To return to the main menu without changes press the M button PAR64 CX 3 RGBW th mann MUSIC IS OUR PASSION 27 Operation Colour selection themann MUSIC IS OUR PASSION Press the M button Press one of the arrow keys repeatedly until the display shows COLO Press the OK button Now you can set a base colour for the preprogrammed automatic shows Use the arrow keys to select a value between 1 and 4 the display shows C 07 C 04 This setting is only relevant if the device is not controlled via DMX When the display shows the
3. DANGER Electric shock caused by short circuit Always use proper ready made insulated mains cabling power cord with a pro tective contact plug Do not modify the mains cable or the plug Failure to do so could result in electric shock death or fire If in doubt seek advice from a regis tered electrician PAR64 CX 3 RGBW th mann MUSIC IS OUR PASSION Safety instructions WARNING Eye damage caused by high light intensity Never look directly into the light source WARNING Risk of epileptic shock Strobe lighting can trigger seizures in photosensitive epilepsy Sensitive persons should avoid looking at strobe lights NOTICE Risk of fire Do not cover the device nor any ventilation slots Do not place the device near any direct heat source Keep the device away from naked flames th mann LED PAR MUSIC IS OUR PASSION 10 Safety instructions NOTICE Operating conditions This device has been designed for indoor use only To prevent damage never expose the device to any liquid or moisture Avoid direct sunlight heavy dirt and strong vibrations NOTICE Power supply Before connecting the device ensure that the input voltage AC outlet matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker Failure to do so could result in damage to the device and possibly injure the user Unplug the device before electrical storms occur and when
4. Effects speed and sensitivity for the sound control 0 10 No automatic colour change 11 255 Automatic colour change as set by channel 1 decreasing speed from fast to slow if channel 1 64 127 PAR64 CX 3 RGBW th mann MUSIC IS OUR PASSION 31 Operation Channel Value Function Automatic colour change as set by channel 1 increasing speed from slow to fast if channel 1 128 191 Sensitivity of the built in microphone for the sound control from insensitive to very sensi tive if channel 1 192 255 7 6 Functions in 8 channel DMX mode Channel 1 ua BF U N themann MUSIC IS OUR PASSION Value 0 Oboe 0 0 255 255 255 255 Function Intensity red 0 to 100 if channel 5 0 15 and channel 7 0 31 Intensity green 0 to 100 if channel 5 0 15 and channel 7 0 31 Intensity blue 0 to 100 if channel 5 0 15 and channel 7 0 31 Intensity white 0 to 100 if channel 5 0 15 and channel 7 0 31 Fixed colour pattern LED PAR 32 Operation Channel Value Function 0 15 No fixed colour and movement pattern 16 255 One of 31 preprogrammed colours channels 6 and 7 without function 6 Strobe effect 0 15 Full brightness no strobe effect 16 255 Strobe effect increasing speed if channel 5 0 15 7 Operating mode selection 0 31 Constant colour colouring is determined by channels 1 to 4 32 63 Fade out effect speed controlled by ch
5. N 21 Operation 7 Operation 7 1 Starting up the device 7 2 Main menu themann MUSIC IS OUR PASSION Connect the unit to the power grid to start the operation After a few seconds the display shows a running reset The unit is then ready for use Press the M button to call the main menu and select an operating mode Use the arrow keys to change the respectively shown value When the display shows the desired value press the OK button If you don t press any button for about a minute the unit will return to the previous mode The set values are retained even when the device is disconnected from the power supply LED PAR 22 Operation DMX mode Press the M button Press one of the arrow keys repeatedly until the display shows SET Press the OK button Press one of the arrow keys repeatedly until the display shows MODE Press the OK button Now use the arrow keys to select one of the following DMX operating modes m 4CH four channels m 6CH six channels 8CH eight channels This setting is only relevant if the device is controlled via DMX When the display shows the desired value press the OK button to confirm the selection Then press M to return to the higher menu level To return to the higher menu level without changes press the M button PAR64 CX 3 RGBW th mann MUSIC IS OUR PASSION 23 Operation DMX address themann MUSIC IS OUR PASSION
6. R MUSIC IS OUR PASSION 36 Troubleshooting Symptom Remedy The unit does not work no Check the mains connection and the fuse light No response to the DMX con 1 Check the DMX ports and cables for proper connection troller 2 Check the address settings and the DMX polarity 3 Try using another DMX controller 4 Check to see if the DMX cables run near or alongside to high voltage cables that may cause damage or interfer ence to DMX interface circuits If the procedures recommended above do not succeed please contact our Service Center You can find the contact information at www thomann de PAR64 CX 3 RGBW th mann MUSIC IS OUR PASSION 37 Cleaning 10 Cleaning Optical lenses Clean the exterior of accessible optical lenses periodically to optimise light output The fre quency of cleaning depends on the operating environment wet smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device Clean with a soft cloth using normal glass cleaning products Always dry the parts carefully th mann LED PAR MUSIC IS OUR PASSION 38 Protecting the environment 11 Protecting the environment Disposal of the packaging mate rial For the transport and protective packaging environmentally friendly materials have been chosen that can be supplied to normal recycling Ensure that plastic bags packaging etc are properly disposed of Do not just
7. S TeV PAR64 CX 3 RGBW LED PAR th mann user manual MUSIC IS OUR PASSION Musikhaus Thomann e K Treppendorf 30 96138 Burgebrach Germany Telephone 49 0 9546 9223 0 E mail info thomann de Internet www thomann de 21 10 2013 Table of contents na vu BF WN Table of contents General OCS isis sds caicisscatiasicii sdsaidscdscas sdiscacsdapiatanteccvssduacaiscataastttroancsdsadinidasansanidaietateastadaoanrsaasdaaaeaniee 5 Safety iNstructiOns eecsscssssssssscssecsssecssseessscessseecssccsssccesscesssecsssesssscessscesateesscecsuccssceceseessueeesseessees 8 Features sceisccssiecscsieciasiesscsssdiatiecscasscossseseviesssssiedoutodesdbodieviesa abodes in audiasiasandouasestsstasoutsecasaasteietaaai drehe enden 12 Installation Starting UP cee eccscssecstecnecseecnsecneesseesneens Connections and operating elemente Operation unsesneneeeeneenseeneeneenennennenn 7 1 Starting up the device 7 2 Main menu 7 3 Menu overview 7 4 Functions in 4 channel DMX mode 7 5 Functions in 6 channel DMX mode 7 6 Functions in 8 channel DMX mode Technical specifications ccssc ssiscossssssccssscessossossecsessessestaosseviesesasnstevsessutsesoudsndvsnscisiacsesbescesencsesvesossteas 35 PAR64 CX 3 RGBW th mann MUSIC IS OUR PASSION Table of contents 9 Troublesho ting u emsennneetesennanenetennerennseeernneneee 36 107 CIGANIN ecaa aan S S 38 11 Protecting t
8. annel 6 64 95 Fade in effect speed controlled by channel 6 96 127 Fade in out effect speed controlled by channel 6 128 159 Auto mix effect speed controlled by channel 6 channels 1 to 5 without function 160 191 Chase 4 colours speed controlled by channel 6 channels 1 to 5 without function 192 223 Chase 12 colours speed controlled by channel 6 channels 1 to 5 without function PAR64 CX 3 RGBW th mann MUSIC IS OUR PASSION 33 Operation Channel Value Function 224 255 Sound control 8 0 255 Dimmer 0 to 100 th mann LED PAR MUSIC IS OUR PASSION 34 8 Technical specifications LEDs Dispersion angle Number of DMX channels Operating voltage supply Power consumption Housing colour Dimensions W x D x H Weight Technical specifications 18 x 4in1 quad colour high power RGBW type 25 4 6 8 AC 230 V 50 Hz 152 W Black item no 281569 Silver item no 281570 270 mm x 270 mm x 330 mm 3 4kg PAR64 CX 3 RGBW th mann MUSIC IS OUR PASSION 35 Troubleshooting 9 Troubleshooting NOTICE Possible data transmission errors For error free operation make use of dedicated DMX cables and do not use ordi nary microphone cables Never connect the DMX input or output to audio devices such as mixers or ampli fiers In the following we list a few common problems that may occur during operation We give you some suggestions for easy troubleshooting th mann LED PA
9. desired value press the OK button to confirm the selection and to return to the main menu To return to the main menu without changes press the M button LED PAR 28 Operation 7 3 Menu overview meno Cs tne Crest Fade C oo Com move Cm CS Cr Ce A001 BEI Por x CE Can __scH GREE Core lt s C me CEs Cm ws aa PAR64 CX 3 RGBW th mann MUSIC IS OUR PASSION 29 Operation 7 4 Functions in 4 channel DMX mode Channel 1 KR w N Value 0 255 0 255 0 0 255 255 Function Intensity red 0 to 100 Intensity green 0 to 100 Intensity blue 0 to 100 Intensity white 0 to 100 7 5 Functions in 6 channel DMX mode Channel 1 themann MUSIC IS OUR PASSION 30 Value Function Operating mode selection 0 63 Constant colour colouring is determined by channels 2 to 5 LED PAR Operation Channel Value Function 64 127 Automatic colour change with 7 colours channels 2 to 5 have no function 128 191 Automatic colour change with 12 colours channels 2 to 5 have no function 192 255 Automatic colour change with 4 colours channels 2 to 5 have no function 2 0 255 Intensity red 0 to 100 if channel 1 0 63 3 0 255 Intensity green 0 to 100 if channel 1 0 63 4 0 255 Intensity blue 0 to 100 if channel 1 0 63 5 0 255 Intensity white 0 to 100 if channel 1 0 63 6
10. dispose of these materials with your normal household waste but make sure that they are collected for recycling Please follow the notes and markings on the packaging Disposal of your old device This device is subject to the European directive 2012 19 EU Do not dispose of the device with your normal household waste Dispose of this device through an approved waste disposal firm or through your local waste facility When discarding the device comply with the rules and regulations that apply in your country If in doubt consult your local waste disposal facility PAR64 CX 3 RGBW th mann MUSIC IS OUR PASSION 39 Notes th mann LED PAR MUSIC IS OUR PASSION 40 Notes PAR64 CX 3 RGBW th mann MUSIC IS OUR PASSION 41 Notes th mann LED PAR MUSIC IS OUR PASSION 42 Musikhaus Thomann e K Treppendorf 30 96138 Burgebrach Germany www thomann de
11. er DMX device Connect the output of the first DMX device to the input of the second one and so on to form a daisy chain Always ensure that the output of the last DMX device in the daisy chain is terminated with a resistor 1100 1 4 W 2 cco n PAR64 CX 3 RGBW th mann MUSIC IS OUR PASSION 17 Starting up Connections in master slave mode themann MUSIC IS OUR PASSION When you configure a group of devices in master slave mode the first unit will control the other units for an automatic sound activated synchronized show This function is ideal when you want to start a show immediately Connect the DMX output of the master device to the DMxX input of the first slave device Then connect the DMX output of the first slave device to the DMX input of the second slave device and so on LED PAR 18 Connections and operating elements 6 Connections and operating elements Rear panel PAR64 CX 3 RGBW th mann MUSIC IS OUR PASSION 19 Connections and operating elements 1 Power chord 2 Display 3 OK button Confirms a selected value 4 5 4 4 buttons Increases decreases the displayed value by one 6 M button Calls the main menu or a submenu 7 Bracket for hanging or setting up 8 Locking screw for the bracket th mann LED PAR MUSIC IS OUR PASSION 20 Connections and operating elements 9 DMXIN DMX input 10 DMX OUT DMX output PAR64 CX 3 RGBW th mann MUSIC IS OUR PASSIO
12. he environment unneeenseensstensseennnseennsseennnstennssensssennnssennsssennsnnennne 39 th mann LED PAR MUSIC IS OUR PASSION 4 1 General notes Symbols and signal words General notes This user manual contains important information on safe operation of the device Read and follow all safety notes and all instructions Save this manual for future reference Make sure that it is available to all persons using this device If you sell the device include the manual for the next owner Our products are subject to a process of continuous development We therefore reserve the right to make changes without notice This section provides an overview of the symbols and signal words used in this user manual PAR64 CX 3 RGBW th mann MUSIC IS OUR PASSION General notes Signal word DANGER WARNING NOTICE Warning signs A th mann LED PAR MUSIC IS OUR PASSION Meaning This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided This combination of symbol and signal word indicates a possible dangerous situation that can result in death or serious injury if it is not avoided This combination of symbol and signal word indicates a possible dangerous situation that can result in material and environmental damage if it is not avoided Type of danger Warning high voltage General notes Warni
13. ices of the same type that have to be configured as Slaves When the display shows the desired value press the OK button to confirm the selec tion and then M to return to the higher menu level To return to the higher menu level without changes press the M button Press the M button Press one of the arrow keys repeatedly until the display shows LINE Press the OK button Press one of the arrow keys repeatedly until the display shows SL Press the OK button Now you can set the number of the device by which it is addressed as slave by the master Use the arrow keys to select a value between 1 and 512 the display shows A001 A512 This setting is only relevant ifthe device is operated as slave by a master but is not controlled via DMX When the display shows the desired value press the OK button to confirm the selec tion and then M to return to the higher menu level To return to the higher menu level without changes press the M button PAR64 CX 3 RGBW th mann MUSIC IS OUR PASSION 25 Operation Programme speed Microphone sensitivity themann MUSIC IS OUR PASSION Press the M button Press one of the arrow keys repeatedly until the display shows SET Press the OK button Press one of the arrow keys repeatedly until the display shows SPEE Press the OK button Now you can set the programme speed for the preprogrammed auto matic shows Use the arrow keys to se
14. it is unused for long periods of time to reduce the risk of electric shock or fire PAR64 CX 3 RGBW th mann MUSIC IS OUR PASSION 11 Features 3 Features themann MUSIC IS OUR PASSION The CX series brings all new colour creations into the range of LED lights The multi chip LEDs provide an unprecedented colour mixing in all spectra Pastel colours vivid and vibrant colours and white tones can be displayed extremely precisely using the spotlights of the CX series Special features of this device EB 18x 4 in 1 quad colour LEDs high power RGBW type Control via DMX 3 different modes and via buttons and display on the unit Automatic mode and sound control Master slave mode Robust metal housing LED PAR 12 Installation 4 Installation Unpack and carefully check that there is no transportation damage before using the unit Keep the equipment packaging To fully protect the device against vibration dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage respectively You can install the device on the wall ceiling or floor Amounting bracket and the necessary screws are included in the package WARNING Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country Always secure the device with a secondary safety attachment such as a Safety cab
15. le or a safety chain PAR64 CX 3 RGBW th mann MUSIC IS OUR PASSION 13 Installation themann MUSIC IS OUR PASSION NOTICE Risk of overheating Always ensure sufficient ventilation The ambient temperature must always be below 40 C 104 F NOTICE Use of stands When mounting the device onto a stand ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand LED PAR 14 Installation NOTICE Possible data transmission errors For error free operation make use of dedicated DMX cables and do not use ordi nary microphone cables Never connect the DMX input or output to audio devices such as mixers or ampli fiers DMX connections The unit offers a 3 pin XLR socket for DMX output and a 3 pin XLR plug for DMX input Please refer to the drawing and table below for the pin assignment of a suitable XLR plug Pin Configuration 1 Ground shielding 2 Signal inverted DMX cold signal 3 Signal DMX hot signal PAR64 CX 3 RGBW th mann MUSIC IS OUR PASSION 15 Starting up 5 Starting up Establish all connections as long as the unit is switched off Use the shortest possible high quality cables for all connections th mann LED PAR MUSIC IS OUR PASSION 16 Starting up Connections in DMX mode Connect the DMX input of the device to the DMX output of a DMX controller or anoth
16. lect a value between 1 and 255 the display shows T0017 7255 This setting is only relevant if the device is not controlled via DMX When the display shows the desired value press the OK button to confirm the selection and then M to return to the higher menu level To return to the higher menu level without changes press the M button Press the M button Press one of the arrow keys repeatedly until the display shows SET Press the OK button Press one of the arrow keys repeatedly until the display shows MIC Press the OK button Now you can adjust the sensitivity of the built in microphone for the sound control Use the arrow keys to select OFF microphone off or a value between 1 and 30 the display shows M 01 M 30 This setting is only relevant if the device is not controlled via DMX When the display shows the desired value press the OK button to confirm the selection and then M to return to the higher menu level To return to the higher menu level without changes press the M button LED PAR 26 Operation Manual test Press the M button Press one of the arrow keys repeatedly until the display shows TEST Press the OK button Press one of the arrow keys repeatedly until the display shows RED GREE BLUE WHIT or STRO Press the OK button Now you can adjust the brightness of the red green blue or white LEDs in a range from 0 to 255
17. ng signs Type of danger Warning suspended load Warning danger zone PAR64 CX 3 RGBW th mann MUSIC IS OUR PASSION 7 Safety instructions 2 Safety instructions Intended use This device is intended to be used as an electronic illumination effect using LED technics Use the device only as described in this user manual Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage No liability will be assumed for damages resulting from improper use This device may be used only by persons with sufficient physical sensorial and intellectual abilities and having corresponding knowledge and experience Other persons may use this device only ifthey are supervised or instructed by a person who is responsible for their safety DANGER Danger for children Ensure that plastic bags packaging etc are disposed of properly and are not within reach of babies and young children Choking hazard Safety Ensure that children do not detach any small parts e g knobs or the like from the unit They could swallow the pieces and choke Never let children unattended use electrical devices th mann LED PAR MUSIC IS OUR PASSION Safety instructions DANGER Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present Never remove any covers There are no user serviceable parts inside
Download Pdf Manuals
Related Search