Home

Fanvil Product User Manual IP Phone Model: C58/C58P

1. Network Address Translation NAT Table Inside IP Address Inside TEF Port Outside TCP Port Inside IP Address Inside UDP Port Outside UDP Port MAT Table Option Transter Type Outside Port O O Inside IF Address DOO O OE Inside Port DOO O O Add NAT Configuration Field name explanation IPSec ALG It is an encryption technology Select it to enable IPSec ALG the default is enabled FTP is a service of connection layer which can FTP ALG transform intranet IP into extranet IP when intranet IP is sending out packet Select it to enable FTP ALG the default is enabled PPTP ALG Select it enable PPTP ALG the default is enabled Shows the NAT TCP mapping table Shows the NAT UDP mapping table Transfer Type Select the NAT mapping protocol style TCP or UDP Inside IP Set the IP address of device which is connected to LAN interface to do NAT mapping Inside Port Set the LAN port of the NAT mapping Outside Port Set the WAN port of the NAT mapping Notice After finish setting click the Add button to add new mapping table click the Delete button to delete the selected mapping table Shows the outside WAN port IP address and the inside LAN port IP address Notice 10M 100M adaptive means the network card and other equipment physical consultations speed testing speed under bridge mode near to 100M in order to ensure the quality of voice and communications real time performance we made some sacrifices of NAT under the transmission perfor
2. TN V FANVIL TECHNOLOGY CO LTO anvI SMART VOIP Fanvil Product User Manual IP Phone Model C58 C58P Version V 2 2 0 0 2005 Fanvil technology Co Ltd All rights reserved This document is supplied by Fanvil Technology Co Ltd No part of this document may be reproduced republished or retransmitted in any form or by any means whatsoever whether electronically or mechanically including but not limited to by way of photocopying recording information recording or through retrieval systems without the express written permission of Fanvil Technology Co Ltd Fanvil Technology Co Ltd reserves the right to revise this document and make changes at any time and without the obligation to notify any person and or entity of such revisions and or changes Product specifications contained in this document are subject to change without notice WWW FAN VIL COM ADD Unit 4A Building NO 7 Tian An Industrial Park Nanshan District Shenzhen TEL 86 755 264 02199 Safety Notices Please read the following safety notices before installing or using this phone They are crucial for the safe and reliable operation of the device Please use the external power supply that is included in the package Other power supplies may cause damage to the phone affect the behavior or induce noise Before using the external power supply in the package please check with home power voltage Inaccurate power voltage may cause fire and dama
3. Navigation key assist users for operating In desktop dialer calling desktop long pressed state they have special function You can configure through the web page according to your patterns of use Access to phone book check the record list and add new records and revise the record When check the phone book record press this key again will return to idle mode Press this key in calling mode you can hear the other side and the other side cannot hear you Turn down or turn up the volume by pressing these two keys 1 In the hook off hands free mode use the key to dial the last call number 2 In stand by mode it has a function to check the Outgoing Call Make the phone into hands free mode If the light blinking indicate the phone has missed call Keys combination include functions such as History Directory DND Menu Del Redial Send Quit Answer Divert Reject Hold Transfer Conf Cl ose and so on View the Missed call Incoming Call and Outgoing Call Inputting the phone number or DTMF LIN DSS keys You can configure them in the web page 1 4 Port for connecting Port Port name Power switch WAN LAN Headset Handset 1 5 Icon introduction Icon KED He description Input SV AC 1A 10 100M Connect it to Network 10 100M Connect it to PC Port type RJ 9 connector Port type RJ 9 connector Description Call out Call in Call hold Auto answer Ca
4. OND Disabled Always Forward Enabled Always Forward Disabled Busy Forward Enabled Busy Forward Disabled No Ans Forward Enabled No ns Forward Disabled Transfer Call Blind Transfer Call ttended Transfer Call Hold Resume Mute as Missed Call IP Changed Idle To Busy Busy To Idle 3 secomd s pr p 1 180 second s 1 100 FEATURE CONTACT Ban Outgoing Enable Call Waiting Enable 3 way Conference Accept Any Call Enable Call Completion Ring From Headset Enable Silent Mode Hide DTMF Enable Intercom Mute Enable Intercom Barge OND Return Code Busy Return Code Reject Return Code Active URI Limit IP Push ML Server CONTACT REMOTE CONTAC REMOTE CONTAC Y E A L LAL Disabled 466 Busy Here 486 Busy Here 603 Decline Wil E B D IAL Block Out Settings Field name Do Not Disturb Ban Outgoing Enable Call Transfer Semi Attend ed Transfer Enable Auto Redial Auto Redial interval Auto Redial Times Enable Call Completion Enable Call Waiting Enable 3 way Conference Accept Any Call Enable Auto Hand down Auto Hand down Time Ring From Headset Enable Intercom Enable Block Cut Add FEATURE explanation Select DND the phone will reject any incoming call the callers will be reminded by busy but any outgoing call from the phone will work well If you select Ban Outgoing to enable it and you cannot dial out a
5. Settings If the incoming call 1s intercom call the phone plays the intercom tone Enable Intercom Barge by selecting it the phone auto answers the intercom call during a call If the current call 1s intercom call the phone will reject the second intercom call Enable Silent Mode by selecting it the phone light will red blink to remind that there is a missed call instead of playing ring tone Enable Turn Off Power Light by selecting it Specify the Emergency Call Number Despite the keyboard is locked you can dial the emergency call number Enable Password Dial by selecting it When number entered is beginning with the password prefix the following N numbers After the password prefix will be hidden as N stand for the value which you enter in the Password Length field For example you set the password prefix is 3 enter the Password Length is 2 then you enter the number 34567 it will display 3 67 on the phone Specify the prefix of the password call number Specify the Password length Specify DND Return code Specify Busy Return Code Specify Reject Return Code Specify the hide DTMF mode Specify the Push XML Server when phone receives request it will determine whether to display corresponding content on the phone which sent by the specified server or not Set Prefix in peer to peer IP call For example what you want to dial is 192 168 1 119 If you define P2P IP Prefix as 192 168 1 you dial only 119 to reach
6. first digits same as your set phone number will be replaced by the alias number specified and New phone number will be send out If your dialed phone number starts with your set phone number The phone will send out your dialed phone number adding suffix number When you dial 0106228 the SIP1 server will recelve 86106228 When you dial 147 the SIP1 server will recelve 1470011 In this page you can configure voice codec input output volume and so on Audio Settings First Codec Third Codec Fifth Codec Onhook Time Handset Input Volume Speakerphone Volume G 7294B8 Payload Length 6 222 Timestamps Enable WAD Second Codec Fourth Codec Sixth Codec millisecond s Default Ring Type a Handset Output Volume b 1 9 1 9 Ring volume 1 9 Tone Standard G 723 1 Bit Rate E DTMF Payload Type 96 127 AUDIO Configuration Field name explanation First Codec The first preferential DSP codec G 711A u G 722 G 723 G 729 Second Codec The second preferential DSP codec G 711A u G 722 G 723 G 729 Third Codec The third preferential DSP codec G 711A u G 722 G 723 G 729 Fourth Codec The forth preferential DSP codec G 711A u G 722 G 723 G 729 Fifth Codec The fifth preferential DSP codec G 711A u G 722 Sixth codec G 723 G729 The sixth preferential DSP codec G 711A u G 722 G 723 G729 Handset Input Specify Input MIC Volume grade Volume Han
7. optional Phone Number Destination optional Portfoptional Alias optional add 0755 Call Mode SIP y Suffiz optional Delete Length optional You need set phone number Destination Alias and Delete Length Phone number is XXXT Destination 1s 255 255 255 255 0 0 0 2 and Alias is del This means any phone No that starts with your set phone number will be sent via SIP2 line after the first several digits of your dialed phone number are deleted according to delete length This setting will realize speed dial function after you dialing the numeric key 2 the number after all will be sent out The phone will automatically send out alias number adding your dialed number if your dialed number starts with your set phone number If you dial 93333 the SIP2 server will receive 3333 When you dial 2 the SIP 1 server will receive 33334444 When you dial 8309 the SIP1 server will receive 07558309 Phone Number Destination optional Port optional Aliasfoptional Call Mode Suffixfoptional Delete Length optional Phone Number Destination optional Portfoptional Alias optional Call Mode Suffiz optional Delete Length optional 8 3 4 PHONE 8 3 4 1 AUDIO rep 0086 SIP 3 You need set Phone Number Alias and Delete Length Phone number is XXXT and Alias is rep XXX If your dialed phone number starts with your set phone number the
8. then when you choose to enable disable following function on your IP phone it will send message to the server and the server will turn on off the function immediately Set the DND On Code When you press the DND hot key the phone will send a message to the server and the server will turn on the DND function Then any calls to the extension will be reyected by the server automatically And the incoming call record will not be displayed in the Call History Set the DND Off Code When you press the DND hot key the phone will send a message to the server and the server will turn off the DND function Set the Always CFwd On Code when you choose to enable the always forward function on your phone it will send message to the server and the server will turn on the function immediately When there are calls to the extension the server will always forward it to the set number automatically And the IP phone will not show the record in the call history anymore Set the Always CFwd Off Code when you choose to disable the always forward function on your phone it will send message to the server and the server will turn off the function immediately Set the Busy CFwd On Code when you choose to enable the busy forward function v on your phone it will send message to the server and the server will turn on the function immediately When there are calls to the extension the server will forward it to the set number automatically based the forwa
9. transfer to and press Send After that third party answers then press Transfer to complete the transfer You need enable call waiting and call transfer first If there are two calls you can just talk to one and keep hold to the other one The one who is keep hold cannot speak to you or hear from you In other way if user wants to invite the third party during the call they can press Conf to make calls mode in conference mode If user wants to stop conference user can press Split User must enable call waiting and three way call first Note the server that user uses must support RFC3515 or it might not be used 3 Alert Transfer During the talk press Transf firstly and then press Send after inputting the number that you want to transfer You are waiting for connection now press Transf and the transfer will be done To use this feature you need enable call waiting and call transfer first 3 9 3 way conference call l Press the Conf softkey during an active call 2 The first call is placed on hold Then you will hear a dial tone Dial the number to conference in then press Send key 3 When the call is answered press Conf and add the first call to the conference 4 If you want to release the conference press Split key 3 10 Multiple way call If user has 2 line calls and wants to invite the three party during the call they can press Conf or Transf New Call press OK enter the number then press Send and wait for
10. 33 Saz NETWORK aaa 34 8 3 2 1 A sc E A A E E E S A OT E E 34 8 3 2 2 LAN a E A 36 8 3 2 3 GS AN EARN en A A 37 8 3 2 4 SERVICE POR T adobe 39 8 352 WIC PS ER NBs sod ist ede iii a 41 8 3 2 6 TIMESDATE tl oben suvaawat 42 A A A E EEE E sarc tare E E TO 44 8 3 3 1 S S a a a a a a rT mene 44 8 3 3 2 acs Bc tae AB etl de date aft ete alga tae Be re date he IE A AEE AE TEA EE TEETER 52 8 3 3 3 STUN A EE EE EE EE E EEE A 53 8 3 3 4 BWALCTPE ER cari a nen eee re mcr ey Te enn ner ee eee 55 o Sa IPHONE e a E T AAEE E T A EEEE rere 58 8 3 4 1 A a A IN teaetat ozone 58 8 3 4 2 FRATURE ti eli 59 8 3 4 3 DIAE PLAN uti lesa ato end ae ed dan evokes ll dd la en els 63 8 3 4 4 CONTAE A A 65 8 3 4 5 REMOTE CONTACT Seetee tt de ex poe ede 68 8 3 4 6 WEB DIA Late a a a a a a a a a a a a 68 5 3 9 FUNCTION RE Yoona A T E 69 8 3 5 1 FUNCTION KE Y aoea ba 69 IZ A A NE A IA 7al O Mamtenano onan ae A a A TE A eee 72 8 3 6 1 AUO POV Nas 12 8 3 6 2 O A A a O A A a a O Eas Knee ELE TET 74 8 3 6 3 AU A A A E ome a Une NOME ane mn Oe 76 8 3 6 4 A o RO E selenauiuus ial uta suspen a tulle jou snseh E 76 8 3 6 5 AC CEO eee eee ts ee eee oe cet et mE or ee em Te ne ee Tae eee ee Cee ee Te A 78 8 3 6 6 REBOO Tira lua e de ac 80 A A e 80 8 3 7 1 WEBER e a 80 BNIA FIREWALL Erus a ld 81 8 3 7 3 A aa e a oaea O 82 8 3 7 4 D A cah TUAE TE E TE E ET PTA AAT A TT O E TET A 85 8 3 7 5 SECURITY o e loss 86 s28 EOGOUT enre T E TE E OE O E 87 9 POPPIN DDN oido E 8
11. Port VLAN m WAN Port LAN ID O 4095 SIP 802 1P Priority lo 07 Audio 802 1P Priority o fF LAN Port YLAN Settings LAN Port VLAN Mode LAN Port VLAN ID O 4095 QoS Configuration Link Layer Discovery Protocol LLDP Settings Enable LLDP Enable LLDP by selecting it After enabling LLDP Learn telephone can Enable Learning automatically learn the data of DSCP 802 1p VLAN Function ID from the switch If the data is different from the data of the LLDP server telephone will change its own value as the value of the switch Synchronous with VLAN in switch Package The time interval of sending LLDP Packet Interval 1 3600 Quality of Service Qos Settings Enable DSCP Enable DSCP by selecting it SIP DSCP Specify the value of the SIP DSCP Audio RTP DSCP Specify the value of the Audio RTP DSCP WAN Port VLAN Settings Enable WAN Port Enable WAN Port VLAN by selecting it VLAN WAN Port VLAN Specify the value of the WAN Port VLAN ID the ID range of the value is 0 4095 SIP 802 1p Priority Specify the value of the sip 8021 p priority the range of the value is 0 7 Audio 802 1p Specify the value of the audio 802 1p priority the Priority range of the value 1s 0 7 LAN Port VLAN Settings LAN Port VLAN Follow WAN Follow the WAN ID Mode Disable Disable Port VALN Enable Enable Port VLAN and specify the Port VLAN ID different from WAN ID LAN Port VLAN Specify the value of the Port VLAN ID different from ID WA
12. aamna eee REE 18 ko A AAA A O NI nectaat 19 ASS Vore Mileena eet nates A mat aca seat eats sala ela 19 4 9 PROGRAMMABLE KEY CONFIGURATION E 19 5 C58 CS8P S OTHER FUNCTION ias 22 5 1 AUTO FANDDONN orra poro 22 5 2 BAN ANONYMOUS CATE 0d e 22 5 3 TA Vie PMG A 22 5 4 DIAL LEER iia 22 5 5 AUTORES dit 22 5 6 CALE COMPLE HON orere tos e eli 23 5 7 RINGEROM HEADSET da 23 5 8 POWER EIGHT ascetics cick A a ea cae aicdtvs cece pedi ia vs O Aa 23 5 9 PO al Bd Biv Maree eiee eee neti NE aetna i oan Mera NEN a aE AON ein Sete ean ne eee NY aie Dele ara 23 Dale PASSWORD DIA tia 23 ESS ESSPS BASIC SETTINGS dadas 24 6 1 FO BY BOAR Dd cos ceases O aa Pee 24 6 2 SCREEN ETT Sl ee a DOS 24 6 3 RINGS ETTINOS oes cesta AA AAA AS 24 6 4 NOCE VOLUME tio ati aie aetna 24 6 5 A O ee eee 24 6 6 GREETING WORDS ta tone daa oe ees eae oa ai aad ness 25 6 7 LANGUAGE ocean 25 C58 C58P S ADVANCED SETTINGS casi i 26 7 1 ACCOUNT aa A A A TO 26 La A AA E EE A II atta acta 26 7 3 PP A 26 7 4 MAINTENANCE e 26 10 PACTORY ESB decia 26 WEB CONFIGURA TION 0 a 27 8 1 INTRODUCTION OF CONFIGURATION A dec 27 Gelade Ways to COMMON io 630 easct cts e ae odo 21 8 1 2 Password Configuration ie Za 8 2 SETTING VIA WEB BROWSER 2d AT A 21 8 3 CONFIGURATION VIA WEB a da ca 28 BAS addon 28 8 3 1 1 A An A NN 28 8 3 1 2 WE ARD OPA meaner an natin a ene ne oe nes ners er ent Hen Tne Ono 29 8 3 1 3 IO AO E APA accel lk lle lee al ie eli elas 32 8 3 1 4 LANGUAGE oa ooo
13. automatically answer the call 4116 O key can be configured through the following events For example psskey1 Key Event AO A OW 8 3 5 2 SOFTKEY Y KEY SOFTKEY Softkey Settings Softkey Mode Screen Unselected Softkeys Selected Softkeys None Call BackiCBack Next Line Next Mut Pause Phonebook Dir Pickup Prey Line Prew Redial SOFTKEY You can configure different functions in different screens for every softkey 8 3 6 Maintenance 8 3 6 1 Auto Provision AUTO PROVISION SYSLOG CONFIG UPDATE Auto Provision Settings Current Config Version 2 0002 Common Config Version 2 14080 CPE Serial Number 00100 00 H020010000000010e59 052 User Password esee Config Encryption Key O O Common Config Encryption Key DO O OE Save 4uto Provision Information T DHCP Option Settings gt gt Plug and Play PnP Settings gt gt Phone Flash Settings gt gt TRO69 Settings gt gt Plug and Play PnP Settings gt gt Enable PnP PnF Server E gt PnP Port 060 PnP Transport UDP PhP Interval hourts Phone Flash Settings gt gt Server Address 0 0 0 Config File Name Protocol Type FTF Update Interval hours Update Mode Fanvil endpoint supports PnP and DHCP and Phone Flash to obtain the parameters The PnP and DHCP and Phone Flash are all deployed endpoint will go by the following process to try to obtain the server address and other parameters when it boots up DHCP opt
14. list of digits If user makes the above configuration after user dials 11 digit numbers started with from 135 to 139 the phone will send out 0 plus the dialed numbers automatically Use this phone you can realize dialing out via different lines without switch in web interface Dial Peer Table Number J EARRA AEE SE SEE 156 if Add Dial Peer Phone Number Destination optional Portloptional Aliasfoptional Call Mode Sufis optional Delete Length optional Dial Peer Option 156 Field name Phone number Destination Port Alias Destination Port Mode Alias Sus Del Length 0 0 0 0 5060 SIP add 0 no suffis 0 0 0 0 0 s060 SIP add 0 no suffis 0 192 168 1 119 5060 SIP no alias no suffis 0 0 0 0 0 5060 SIP add 0 no suffis T SIP explanation There are two types of matching conditions one is full matching the other is prefix matching In the Full matching you need input your desired phone number in this blank and then you need dial the phone number to realize calling to what the phone number is mapped In the prefix matching you need input your desired prefix number and T then dial the prefix and a phone number to realize calling to what your prefix number is mapped The prefix number supports at most 30 digits Set Destination address This is optional config item If you want to set peer to peer call please input destination IP address or domain name If you want to use this dial rule on SIP2 lin
15. network can work normally You can do this in one of two ways depending on how your workspace is set up Direct network connection by this method you need at least one available Ethernet port in your workspace Use the Ethernet cable in the package to connect WAN port on the back of your phone to the Ethernet port in your workspace Since this VoIP Phone has router functionality whether you have a broadband router or not you can make direct network connect The following two figures are for your reference Internet _ ADSL Cable Modem Inter ret i E n e hom ADSL Cable Miodem Shared network connection Use this method 1f you have a single Ethernet port in your workspace with your desktop computer already connected to it First disconnect the Ethernet cable from the computer and attach it to the WAN port on the back of your phone Next use the Ethernet cable in the package to connect LAN port on the back of your phone to your desktop computer Your IP Phone now shares a network connection with your computer The following figure is for your reference i Internet y Sy ADSL Cable Broadband Modem Router Step 2 Connect the handset to the handset port by the handset cable in the package Step 3 connect the power supply plug to the AC 5V adapter port on the back of the phone Use the power cable to connect the power supply to a standard power outlet in your workspace Step 4 push the on of
16. 1 Press Menu gt Applications gt Enter gt SMS gt Enter 2 Use the navigation keys to highlight the options You can read the message in the Inbox Outbox 3 After view the new message you can press Reply to reply the message and use the 2aB softkey to change the Input Method when enter the reply message press OK then use the navigation keys to select the line from which you want to send then Send 4 If you want to write a message you can press New and enter message Use the 2aB softkey to change the Input Method When you input the message you want to send press OK then use the navigation keys to select the line from which you want to send then Send 5 If you want to delete the message after view the message press Del then you have three options to choose Yes All No 4 8 2 Memo You can add some memos to record some important things to remind you Press Menu gt Application gt Memo gt Enter gt Add There are some options to configure Mode Date Time text Ring When the configuration 1s completed press Save 4 8 3 Voice Mail 1 Press Menu gt Application gt Voice Mail gt Enter 2 Use the navigation keys to highlight the line for which you want to set press Edit and use the navigation key to turn on the mode and the input the number Press 2aB softkey to choose the proper input method 3 Press Save to save the change 4 To view the new voicemail Press the Voicemail softkey directly Press Dial t
17. 192 168 1 119 Default is If there is no Set it means to disable dialing IP Specify the server IP that remote control phone for corresponding operation Action URL Specify the Action URL that Record the operation of phone Settings send this corresponding information to server url http InternalServer FileName xml Internal Server 1s server IP Filename is name of xml that contains the action message Block Out Settings Set Add Delete Limit List Please input the prefix of those phone numbers which you forbid the phone to dial out For example 1f you want to forbid those phones of 001 as prefix to be dialed out you need input 001 in the blank of limit list and Block out then you cannot dial out any phone number whose prefix is 001 X and are wildcard x means matching any single digit For example 4xxx expresses any number with prefix 4 which length is 4 will be forbidden to dialed out means matching any arbitrary number digit For example 6 expresses any number with prefix 6 will be forbidden to dialed out Notice Black List and Limit List can record at most10 items respectively 8 3 4 3 DIAL PLAN This system supports 4 dial modes 1 End with dial your desired number and then press 2 Fixed Length the phone will intersect the number according to your specified length 3 Time Out After you stop dialing and waiting time out system will send the number collected 4 User defined you
18. 8 9 1 SECA TON aeaieo A 88 FEI A 88 A I eh OU eset sascise decease se sect cc acer aeee co atu nc eat aes Eade 88 LES INGC Wot eare S oe ce seo ed ood ate a a eee aes 89 9 14 Maintenance and management ad 90 9 2 DIG CHARACTER MAP TABLE ri 90 1 Introducing C58 CS58P VoIP Phone 1 1 Thank you for your purchasing C58 C58P Thank you for your purchasing C58 C58P C58 C58P is a full feature telephone that provides voice communication over the same data network that your computer uses This phone s functions not only much like a traditional phone allowing to place and receive calls and enjoy other features that traditional phone has but it also own many data services features which you could not expect from a traditional telephone This guide will help you easily use the various features and services available on your phone 1 2 Delivery Content Please check whether the delivery contains the following parts The base unit with display and keypad The handset The handset cable The power supply The Ethernet cable The User Manual you may download from our website IP Phone are designed to look like conventional phones the following photo shows a broad overview of the IP Phone 1 3 Keypad Key Sag Navigation DIRECTORY MUTE Key name Directory Mute UNA Volume REDIAL Redial Hands free Indicator light Soft key 1 2 3 4 History Digital keyboard Function Description
19. HCP PPPoE 802 1 Settings User Passware Enable 802 1 E WAN Status WAN Status Active IP Address 192 168 1 30 Current Subnet Mask 259 259 255 0 Current IP Gateway 192 168 1 1 MAZ Address 00 38 59 c5 11 80 Active IP Address The current IP address of the phone Current Subnet The current Netmask address Mask MAC Address The current MAC address of the phone Current IP Gateway The current Gateway IP address WAN Settings Obtain DNS Server Automatically Static IP DHCP PPPoE Please select the proper network mode according to the network condition C58 C58P provide three different network settings O Static If your ISP server provides you the static IP address please select this mode and then finish Static Mode setting If you don t know about parameters of Static Mode setting please ask your ISP for them O DHCP In this mode you will get the information from the DHCP server automatically need not to input this information artificially O PPPoE In this mode you must input your ADSL account and password You can also refer to 2 2 1 Network setting to speed setting your network Obtain DNS server Select it to use DHCP mode to get DNS address if automatically you don t select it you will use static DNS server The default is selecting it IP Address Subnet Mask IP Gateway DNS Domain Primary DNS Secondary ONS If you use static mode you need set it IP Address Input the IP ad
20. LAN optional voice vlan data vlan NAT Penetrate Stun Penetrate Support DMZ Support VPN L2TP OPEN VPN function 89 Wan Port supports main DNS and secondary DNS server can select dynamically to get DNS in DHCP mode or statically set DNS address Support DHCP client on WAN Support DHCP server on LAN QoS with DiffServ Network tools in telnet server including ping trace route telnet client 9 1 4 Maintenance and management Upgrade firmware through POST mode Web telnet and keypad management Management with different account right LCD and WEB configuration can be modified into requested language and support multi language dynamically shifted Upgrade firmware through HTTP FTP or TFTP Telnet remote management upload download setting file Support Syslog Support Auto Provisioning upgrade firmware or configuration file 9 2 Digit character map table f DJKLJjkl 9
21. N ID the range of the value is 0 4095 8 3 2 4 SERVICE PORT You can set the port of telnet HTTP RTP by this page Qose LAM SERVICE PORT Service Port Settings amp Web Server Tyoe HTTP HTTP Port HTTPS Port Telnet Port RTP Port Range Start RTP Port Quantity 180 Field name Service Port Settings Web Server Type HTTP Port HTTPS Port Telnet Port RTP Port Range Start RTP Port Quantity Notice SERVICE PORT explanation Specify Web Server Type Set web browser port the default is 80 port if you want to enhance system safety you d better change it into non 80 standard port Example The IP address is 192 168 1 70 and the port value 1s 8090 the accessing address 1s http 192 168 1 70 8090 Before using the https you must download https authentication certification into the phone then set web browser port the default is 443 port if you want to enhance system safety you d better change it into non 443 standard port You can access to the web in https after rebooting the phone Set Telnet Port the default is 23 You can change the value into others Example The IP address is 192 168 1 70 The telnet port value is 8023 the accessing address is telnet 192 168 1 70 8023 Set the RTP Start Port It is dynamic allocation Set the maximum quantity of RTP Port the default is 200 1 You need save the configuration and reboot the phone after set this page 2 Please REBOOT the system if y
22. Notice the add button for adding a new contact the modify button for modifying the added contact the clear all button for clear all input information of the contact Group Option Group Select the added groups then modify or delete and so on Name Input the name of the group then click the add button you can add a new group Ring Type Specify the ring type for the group as adding a new group Blacklist Settings Type Select the blacklist type you can select number or prefix of number Value Input number or prefix of number Line Select the sip line Notice the add button for adding a new blacklist the delete button for deleting one item the delete all button for deleting all items If user does not want to answer some phone calls add these phone numbers to the Black List and these calls will be rejected x and are wildcard x means matching any single digit For example 4xxx expresses any number with prefix 4 which length 1s 4 will be forbidden to be responded DOT means matching any arbitrary number digit For example 6 expresses any number with prefix 6 will be forbidden to be responded If user wants to allow a number or a series of number incoming he may add the number s to the list as the white list rule The configuration rule 1s number for example 123456 or 1234xx Black List 4119 Means any incoming number is forbidden except for 4119 Note End with DOT when set up the white list 8 3 4 5 REMO
23. TE CONTACT FEATURE DIAL PLAN REMOTE CONTACT WEB DIAL Remote Phonebook Settings a Phonebook Name Server URL SIP Line Authentication User Password nde 1 A feta ene O 2 A MO e le AJO TEO 2 A MO Te le AO TEO 0 EME lee You need to match a XML Phonebook address and you can directly access to the corresponding remote phonebook on the phone For example Set the Phonebook Name as fanvil Server URL is tftp 192 168 1 3 admin phonebook index xml Or Set the Phonebook Name as Idap Server URL is Idap 192 168 1 3 dc winline dc com Remote Phonebook Setting Phonebook Name Custom the phonebook name displayed on the phone Server URL Specify the server url of the remote phonebook SIP Line Specify the sip line for the remote phonebook Authentication Specify the authentication mode for remote phonebook User password Input the authentication username and password 8 3 4 6 WEB DIAL AUDIO FEATURE Web Dial Settings Dial Number Lp Line Selection 111100192 168 1 2 You can make a call through the WEB DIAL enter the Dial Number then press Dial 1f you want to finish the talk press Hang up 8 3 5 FUNCTION KEY 8 3 5 1 FUNCTION KEY FUNCTION KEY Screen Configuration Contrast 1 09 Enable Backlight E Function key Settings key Type Value Line Subtype Pickup Number psskey1 Key Event id mer DSS Key 2 Key Event Headset psskey3 tine Noe AO psskey4 ne A none AO Programm
24. able Key Settings Key Desktop Dialer Calling Desktop Long Pressed Up Down Left Right OK Function Key Field name explanation Contrast Set contrast of screen Enable Backlight Set enable disable backlight Line Key Settings Line select Auto SIP1 SIP2 or IAX2 in function key type After you set it you pick up handset or hands free press this function key and then you can use the corresponding SIP line Function Key Settings key Show the function key s serial number Type Memory Key settings can be stored in key storage for each number the standby or off hook select the function keys on the keyboard can call this number Line set the dial mode Auto SIP1 SIP2 IAX2 Key Event functions monitor state DTMF In the call send DTMF URL You can input remote book url Value Set the type parameter values Line Choose which lines to use this feature Subtype Select the function parameters Key Event and Memory Event NOTICE O Memory keys can be configured through the following Speed Dial function through the configuration of the key corresponding to the number of ways as shown below User can press the Fl key to allocate this number by line1 line Intercom function you can press this key in standby to automatically answer the call and make each other DSS Key 1 intercom User can be configured in accordance with push to talk function the way 4116 was the other number Then press the standby button and make it
25. all Forward via Phone interface 1 Press Menu gt Features gt Enter gt Call Forwarding gt Enter 2 There are 4 options Disabled Always Busy and No Answer 3 Ifyou choose one of them except Disabled enter the phone number you want to forward your call to Press Save to save the changes 3 5 Call Hold 1 Press the Hold button or Hold softkey to put your active call on hold 2 Ifthere is only one call on hold press the hold softkey to retrieve the call 3 Ifthere are more than one call on hold press the line button and the Up Down button to highlight the call then press the Unhold button to retrieve the call 3 6 Call Waiting l Press Menu gt Features gt Enter gt Call Waiting gt Enter 2 Use the navigation keys to active or inactive call waiting 3 Then press the Save to save the changes 3 Mute Press Mute button during the conversation icon will be showed in the LCD Then the called will not hear you but you can hear the called Press it again to get the phone to normal conversation 3 8 Call transfer 1 Blind Transfer During talk press the key Transf and then dial the number that you want to transfer to and finished by Phone will transfer the current call to the third party After finishing transfer the call you talk to will be hanged up User cannot select SIP line when phone transfers call 2 Attended Transfer During talk press the key Transf then input the number that you want to
26. ansmit to every other port except the send port Switchboard Broadcast Frame Lise VLAN After Switchboard received Switchboard the Broadcast Frame only transmit it to other e port which belong to same o VLAN with send port Broadcast Frame Broadcast iFrame 7 ee VLANI f y 1 VLANZ Y E Batere QS gt Broadcast i A Domain E 3 Domain ae ail Chart 2 s In chart 1 there is a layer 2 that switches without setting VLAN Any broadcast frame will be transmitted to the other ports except the send port For example a broadcast information is sent out from port then transmitted to port 2 3and 4 In chart 2 red and blue indicate two different VLANs in the switch and port 1 and port 2 belong to red VLAN port 3 and port 4 belong to blue VLAN Ifa broadcast frame is sent out from port 1 switch will transmit it to port 2 the other port in the red VLAN and not transmit it to port3 and port 4 in blue VLAN By this means VLAN divide the broadcast domain via restricting the range of broadcast frame transition Note chart 2 use red and blue to identify the different VLAN but in practice VLAN uses different VLAN IDs to identify Link Layer Discovery Protocol LLDP Settings Enable LLEF E Facket Interval 1 3600 second s Enable Learning Function E Quality of Service Qos Settings Enable DSCP El SIP DSCP 0 63 Audio RTP DSCP O 63 WAN Port LAN Settings Enable WAN
27. call function for your IP phone automatically Specify the keep alive type if the type is option the phone will send option sip message to server every NAT Keep Alive Period s then the server responses with 200 to keep alive If the type is UDP the phone will send UDP message to server to keep alive every NAT Keep Alive Period s Set examining interval of the server default 1s 60 seconds Set the user agent if have the default is VoIP Phone 1 0 Select DTMF sending mode there are three modes O DTMF RELAY Oo DTMF RFC2833 O DTMF SIP INFO Different VoIP Service providers may provide different modes Set sip port of each line Set ring type of each line Enable Disable system to support RFC3581 Via rport 1s special way to realize SIP NAT Enable PRACK Enable Long Contact Convert URI Dial Without Registered Ban Anonymous Call Enable DNS SRV Server Type RFC Protocol Edition Transport Protocol RFC Protocol Edition Keep Authentication Answer With A Single Codec Auto TCP Enable Strict Proxy Enable GRUU Enable Display name Quote Enable user phone Enable Missed Call Log Enable or disable SIP PRACK function suggest use the default config Set more parameters in contact field connection with SEM server Convert to 23 when send the URI Set call out by proxy without registration Set to ban Anonymous Call Support DNS looking up with _sip udp mode Select the special type of server whi
28. can customize digital map rules to make dialing more flexible It 1s realized by defining the prefix of phone number and number length of dialing In order to keep some users secondary dialing manner when dialing the external line with PBX phone can be added a special rule to realize it so user can dial a number as external line prefix and get the secondary dial tone to keep dial the external number After finishing dialing phone will send the prefix and external number totally to the server For example there 1s a rule 9 xxxxxxxx 1n the digital map table After dialing 9 phone will send the secondary dial tone user may keep going dialing After finished phone will call the number which starts with 9 actually the number sent out is 9 digit with 9 CIAL PLAM Basic Settings Press to Send Dial Fixed Length to Send Send after secondisis 30 Press to Do Blind Transfer Blind Transfer on Onhook Attended Transfer on Onhook Dial Plan Table DIAL PLAN Configuration Field name explanation Basic Setting Press to Send Set Enable Disable the phone ended with dial Dial Fixed Length Specify the Fixed Length of phone ending with Send after 3 30 Set the timeout of the last dial digit The call will be sent after timeout seconds Press to Do Blind Enable Blind Transfer On Hook when executing Blind Transfer Transfer End with press after inputting the number that you want to transfer the
29. ch is encrypted or has some unique requirements or call flows Select SIP protocol version to adapt for the SIP server which uses the same version as you select For example if the server is CISCO5300 you need to change to RFC2543 else phone may not cancel call normally System uses RFC3261 as default Set transport protocols TCP or UDP Set Anonymous call out safely Support RFC3323and RFC3325 Enable Disable Keep Authentication System will take the last authentication field which is passed the authentication by server to the request packet It will decrease the server s repeat authorization work if it is enable Enable Disable the function when call is incoming phone replies SIP message with just one codec which phone supports Set to use automatically TCP protocol to guarantee usability of transport as message is above 1300 byte Support the special SIP server when phone receives the packets sent from server phone will use the source IP address not the address in via field Set to support GRUU Set to make quotation mark to display name as the phone sends out signal in order to be compatible with server Enable user phone by selecting it it is contained in the invite sip message in order to be compatible with server Enable the missed call log by it the phone will save the missed call log into the call history record and display the missed calls on the idle screen or won t save the missed call log into the call histo
30. date 2 Update after reboot means update after reboot 3 Update at time interval means periodic update Enable TR069 by selecting it Specify the ACS Server Type Specify the ACS Server URL ACS User Specify ACS User ACS Password Specify ACS Password TRO69 Auto Login Enable TRO69 Auto Login by selecting it Inform Sending Specify the inform Sending Period unit is second Period 8 3 6 2 SYSLOG Syslog is a protocol which is used to record the log messages with client server mechanism Syslog server receives the messages from clients and classifies them based on priority and type Then these messages will be written into log by some rules which administrator can configure This 1s a better way for log management 8 levels in debug information Level 0 emergency This is highest default debug info level You system cannot work Level 1 alert Your system has deadly problem Level 2 critical Your system has serious problem Level 3 error The error will affect your system working Level 4 warning There are some potential dangers But your system can work Level 5 notice Your system works well in special condition but you need to check its working environment and parameter Level 6 info the daily debugging info Level 7 debug the lowest debug info Professional debugging info from R amp D person At present the lowest level of debug information is info debug level only can be displayed on t
31. dial function What is redial function A can t not build a call with B when B is in busy then A will subscribe B s calling mode at 60 second intervals Once B 1s available A will get reminder of rings to hook off while a hooks off A will call B automatically If at this time A 1s occupied temporarily and unwilling to contact B A also can cancel the redial function by dialing an appointed prefix plus B s number before making the redial function Number Destination uffi Del Length T 0 0 rep unredial 3 is appointed prefix code After making the above configuration A can dial 3 plus B s phone number to make the redial function A is appointed prefix code After configuration A can dial 4 to cancel redial function User can set prefix in random in the case of no affecting current dialing rules 4 4 Click to dial When user A browses in an appointed Web page user A can click to call user B via a link this link to user B then user A s phone will ring after A hooks off the phone will dial to B 4 5 Call back This function allows you dial out the last phone call you received 4 6 Auto answer When there is an incoming call after no answer time the phone will answer the call automatically 4 7 Hotline You can set hotline number for every sip and then enter the dialer interface and after Warm Line Time the phone will call out the hotline number automatically 4 8 Application 4 8 1 SMS
32. dress distributed to you Subnet Mask Input the Netmask distributed to you IP Gateway Input the Gateway address distributed to you Set DNS domain postfix When the domain which DNS Domain you input cannot be parsed phone will automatically add this domain to the end of the domain which you input before and parse it again Primary DNS Input your primary DNS server address Secondary DNS Input your standby DNS server address Service Name ANY User useriZ3 Password If you uses PPPoE mode you need to make the above setting Service Name It will be provided by ISP User Input your ADSL account Password Input your ADSL password Notice 1 Click Apply button after finished your setting IP Phone will save the setting automatically and new setting will take effect 2 If you modify the IP address the web wills not response by the old IP address Your need input new IP address in the address column to logon in the phone 3 If networks ID which is DHCP server distributed is same as network ID which is used by LAN of system system will use the DHCP IP to set WAN and modify LAN s networks ID for example system will change LAN IP from 192 168 10 1 to 192 168 11 1 when system uses DHCP client to get IP in startup If system uses DHCP client to get IP in running status and network ID is also same as LAN s system will refuse to accept the IP to configure WAN So WAN s active IP will be 0 0 0 0 8 3 2 2 LAN LAN Se
33. ds free Volume Specify Hands free Volume grade G729AB Payload Set G729 Payload Length Length Onhook Time Specify the least reflection time of Hand down the default is 200ms Default Ring Type Select Ring Type Handset Output Volume Specify Output receiver Volume grade Speakerphone Specify Speakerphone Volume grade volume Ring Volume Specify Ring Volume grade G722 Timestamps 160 20ms or 320 20ms is available G723 1 Bit Rate 5 3 kb s or 6 3kb s is available Default Ring Type Set up the ring by default Tone Standard Select Tone Standard Enable VAD Select 1t or not to enable or disable VAD If enable VAD G729 Payload length could not be set over 20ms ar iS Set DTMF Payload Type 8 3 4 2 FEATURE In this web page you can configure Hotline Call Transfer Call Waiting 3 Ways Call Black List white list Limit List and so on AW DTS FEATURE DIAL PLAM Feature Settings A DAO Do Sot Disturb Enable Call Transfer Semi ttended Transfer Enable Auto Handdown Auto Handdown Time Enable Auto Redial Auto Redial Interval Auto Redial Times Enable Intercom Enable Intercom Tone P2P IP Prefix Turn OF Power Light Emergency Call Number Enable Password Dial Password Dial Prefix Password Length SUBIC ction URL Settings Setup Completed Registration Success Registration Disabled Registration Failed Of Hook On Hook Incoming Call Outgoing Call Call Established Call Terminated ONO Enabled
34. e you need input 255 255 255 255 or 0 0 0 2 in it SIP3 into 0 0 0 3 Set the Signal port the default is 5060 for SIP Set alias This is optional config item If you don t set Alias it will show no alias Note There are four types of aliases 1 Add xxx it means that you need dial xxx in front of phone number which will reduce dialing number length 2 All xxx it means that xxx will replace some phone number 3 Del It means that phone will delete the number with length appointed 4 Rep It means that phone will replace the number with length and number appointed You can refer to the following examples of different alias application to know more how to use different aliases and this dial rule Call Mode Suffix suffix if you don t set it Delete Length Select different signal protocol SIP or IAX2 Set suffix this is optional config item It will show no Set delete length This is optional config item For example if the delete length is 3 the phone will delete the first 3 digits then send out the rest digits You can refer to examples of different alias application to know how to set delete length Examples of different alias application a Phone Number Destination optional Portfoptional Aliasfoptional Call Mode Suffixfoptional Delete Length optional Phone Number Destination optional Port optional Aliasfoptional all 33334444 Call Mode SIP y Suffixfoptional Delete Length
35. e line can t be connected the phone can automatically switch to other line to call 9 kinds of ring types and 3 user defined music rings DTMF Relay support SIP info DTMF Relay RFC2833 SIP application SIP Call forward transfer blind attended hold waiting 3 way talking SMS pickup join call redial unredial multi line intercom BLF presence push to talk auto redial call return Call control features Flexible dial map hotline empty calling No reject service black list for reyect authenticated call white list limit call no disturb caller ID CLIR reject the anonymous call CLIP make a call with anonymous Dial without register Support phonebook 500 records Incoming calls outgoing calls missed calls Each supports 300 records Support A X2 4 DSS keys Soft keys programmable function keys programmable Code synchronization via IP PBX IMS Support click to dial via web phone book Group listening Voice codec setting for each SIP line Support keypad lock and emergency call during the keypad lock Customized lcd logo Ring play via headset or speaker setting Signal tone parameters customized Phonebook supports vcard standard 12 24 hours time display Support daylight saving time Support path group Support SIP Privacy Support SMS Support MWI Support Speed dial Support XML 9 1 3 Network features WAN LAN support bridge and router model Support PPPoE for xDSL Support basic NAT and NAPT Support V
36. e password to enter the interface the default password is 123 You can set it through the web page Then choose Account then press Enter you can do some sip settings 7 2 Network Press Menu gt Enter gt Advanced settings and then input the password to enter the interface Then choose Network and press Enter you can do network settings you can refer to 2 2 1 Network settings 7 3 Security Press Menu gt Enter gt Advanced settings and then input the password to enter the interface Then choose Security you can configure Menu Password Key lock Password Key lock Status and whether to ban Outgoing 7 4 Maintenance Press Menu gt Enter gt Advanced settings and then input the password to enter the interface Then choose Maintenance and press Enter you can configure Auto Provision Backup and Upgrade 7 5 Factory Reset Press Menu gt Enter gt Advanced settings and then input the password to enter the interface Then choose Factory Reset and press Enter you can choose Yes or No 8 Web configuration 8 1 Introduction of configuration 8 1 1 Ways to configure C58 C58P has three different ways to different users O Use phone keypad O Use web browser recommendatory way O Use telnet with CLI command 8 1 2 Password Configuration There are two levels to access to phone root level and general level User with root level can browse and set all configuration parameters while user with general level can set all con
37. ecurity File Select Security File Select the security file you want to update then click Update button to update Delete Security File Select Security File Select the security file you want to delete then click Delete button to update SIP TLS File Show SIP TLS authentication certification file HTTPS File Show HTTPS authentication certification file Open VPN Files Show Open VPN File authentication certification file 8 3 8 LOGOUT Logout Click Logout button to logout the system Click Logout and you will exit web page If you want to enter 1t next time you need input user name and password again 9 Appendix 9 1 Specification 9 1 1 Hardware Input Output Output 5V 1A 10 100Base T RJ 45 1 PORT LAN 10 100Base T RJ 45 1 PORT Consumption 74 x 28mm Temperature Relative Humidity 10 65 Broadcom VoIP chipset SDRAM 16MB rie x WX 995x295 175mm 1 5kg 9 1 2 Voice features SIP supports 2 SIP servers Support SIP 2 0 RFC3261 and correlative RFCs Codec G 711A u G 723 1 high low G 729a b G 722 G 726 Echo cancellation G 168 Compliance in LEC additional acoustic echo cancellation AEC can reach 96ms max filter length in hands free mode Support Voice Gain Setting VAD CNG Support full duplex hands free Support multi line HD Voice SIP support SIP domain SIP authentication none basic MD5 DNS name of server Peer to Peer IP call Automatically select calling line 1f on
38. ecute to ping 192 168 1 118 system will deny the request to send icmp request to 192 168 1 118 for the out access rule But if devices ping other devices which network ID is 192 168 1 0 it will be normal Click the Delete button to delete the selected rule 8 3 7 3 NAT NAT is abbreviated from Net Address Translation it s a protocol responsible for IP address translation In other word it is responsible for transforming IP and port of private network to public also 1s the IP address mapping which we usually say Legal IP address ye Suet uot NAT Equipment Inner network DMZ config In order to make some intranet equipment support better service for extranet and make internal network security more effectively these equipment open to extranet need be separated from the other equipment not open to extranet by the corresponding isolation method according to different demands We can provide the different security level protection in terms of the different resources by building a DMZ region which can provide the network level protection for the equipment environment reduce the risk which is caused by providing service to distrust customer and is the best position to put public information The following chart describes the network access control of DMZ CE 3 gt Inner Network area WEB FILTER FIREWALL VER SECURITY Application Layer Gateway ALG Settings IPSec ALG M FTF aLG M PPTP ALG E
39. eing called in private network Send request Stun server tell to Stun Server from 5060 port ant to receive data trom 5060 Private Network Gateway NAT STUN Server DIAL PEER Simple Traversal of UDP through Nats STUN Settings STUN NAT Traversal Server Address Server Port Binding Period SIP Waiting Time SIP Line Using STUN Lise STUN Field name Simple Traversal of UDP through NATs STUN Settings STUN NAT Traversal Server Address Server Port Blinding Period s SIP Waiting Time Sip Line Using STUN SIP Line Using STUN Use STUN FALSE 3476 second s 800 milliseconds STUN explanation Shows STUN NAT Transverse estimation true means STUN can penetrate NAT while False means not Set your SIP STUN Server IP address Set your SIP STUN Server Port Set STUN blinding period s If NAT server finds that a NAT mapping is idle after time out it will release the mapping and the system need send a STUN packet to keep the mapping effective and alive Specify the sip wait stun time you can input the time depended on your network condition Choose line to set info about SIP There are 2 lines to choose You can switch by Load button Use STUN Enable Disable SIP STUN Notice SIP STUN is used to realize SIP penetration to NAT If your phone configures STUN Server IP and Port default is 3478 and enable SIP Stun you can use the ordinary SIP Server to real
40. elnet a LIENS CONFIG UPDATE REBOOT Syslog Settings Server Address Server Part MGR Log Level SIP Log Level IAX2 Log Level Enable Syslog E Web Capture Syslog Configuration Field name explanation Syslog Setting Server Address Set Syslog server IP address Server Port Set Syslog server port MGR Log Level Set the level of MGR log SIP Log Level Set the level of SIP log IAX2 Log Level Set the level of IAX2 log Enable Syslog Select it or not to enable or disable syslog Web Capture Start Click the start button when you need capture the WAN packet stream of the phone then open or save the file as the interface Stop Click the end button to stop capturing the packet stream 8 3 6 3 CONFIG Save Configuration Backup Configuration Clear Configuration Field name Save Configuration Backup Configuration Clear Configuration 8 3 6 4 UPDATE Click Save button to save the configuration files Save all network and VOIP settings Click Clear button to clear the configuration files Config Setting Explanation You can save all changes of configurations Click the Save button all changes of configuration will be saved and be effective immediately Right clicks on Right click here and select Save Target As config File txt then you will save the config file in txt format or select Save Target As config File xml then you will save the config file i
41. erver Port Authentication User Authentication Password SIP User Display Name Proxy Server Address Proxy Server Port Proxy User Proxy Password Domain Realm Backup Server Address Backup Server Port Enable Registration Codecs Settings Disable Codecs Enable Codecs Advanced SIP Setting Shows if the phone has been registered the SIP server or not or so show Unapplied Input your SIP server address Set your SIP server port Input your SIP register account name Input your SIP register password Input the phone number assigned by your VoIP service provider Phone will not register if there 1s no phone number configured Set the display name Set proxy server IP address Usually Register SIP Server configuration is the same as Proxy SIP Server But if your VoIP service provider gives different configurations between Register SIP Server and Proxy SIP Server you need make different settings Set your Proxy SIP server port Input your Proxy SIP server account Input your Proxy SIP server password Set the sip domain if needed otherwise this VoIP phone will use the Register server address as sip domain automatically Usually it is same with registered server and proxy server IP address Input the Backup Server Address if the primary server 1s unavailable then the phone will enable the Backup Server Address Specify the Backup Server Port Start to register or not by selecting it or not Use the nav
42. erver in it If there is no DHCP server available phone has to be changed WAN network setting to Static IP or PPPoE Setting PPPoE mode for ADSL connection 1 Get PPPoE account and password first 2 Press Menu gt Settings gt Advanced Settings then enter passwords and choose network gt WAN settings gt Connection Mode enter and choose PPPoE through navigation keys and press the Save key 3 Press Back then choose PPPoE Set press Enter 4 The screen will show the current information Press Del to delete it then input your PPPoE user and password and press Save 5 Press Back six times to return to the idle screen 6 Check the status If the screen shows Negotiating it shows that the phone is trying to access to the PPPoE Server if 1t shows an IP address then the phone has already get IP with PPPoE Setting Static IP mode static ADSL Cable or no PPPoE DHCP network l Prepare the network s parameters first such as IP Address Net mask Default Gateway and DNS server IP address If you don t know this information please contact the service provider or technician of network 2 Press Menu gt Settings gt Advanced Settings then enter passwords and choose network gt WAN settings gt Connection Mode enter and choose Static through navigation keys and press the Save key 3 Press Back then choose Static Set press Enter 4 The screen will show the current information and then press Del to delete Input
43. esae sues 6 1 2 DEENER E CONTENT ra 6 1 3 AD o e a do ds o dd 7 1 4 PORT FOR CONNECTING ta oca 8 1 5 ICONINTRODUC TION lt a o ia 8 1 6 PEDINTRODUS TON col 9 2 INITIAL CONNECTING AND SETTINGS csssccccccsssssccccsscscccccssssccccccessssscccesccscoseess 11 2 1 CONNECT TAE ON tara iies 11 Dull Conect ttoneiWor Kieren a dl aia Ve 11 DAZ TROWEE APLICA ds aa 12 22 BASIC INITIALIZATION 65555 co sel ea elec ely au oer A a aii 12 Pimp A E en ne ee ance ne eR A ee 12 3 CS8 CS8P S BASIC FUNC TION satis 14 3 1 MANG CATE dida 14 Dole Cal DOV ieee a a o e e dl e ed ee a a de 14 az Call MEMOS tt ld td al ds ad a Ee OPTE RE Sy AeA 14 332 ANSWERING ACAL Mis sci iO a des 14 3 3 O A circ nee enact ote II A A 15 3 4 CALEROR WV AR Deia ida 15 3 5 CARETO Ds A E cna 15 3 6 CAE WATTS 15 3 7 A o leccle nce neu oneneca pnw aeceel 15 3 8 CATT ARRANS HER siscs aces cuse sadist ely saciueteccas o goede in See ae 16 3 9 AWAY CONFERENCE CABE a au aa eat Mates 16 SL MOLTPLE WA CALL A ba 16 4 C58 C58P S ADVANCED FUNC VION ia e A es ease in eee Rhee 17 4 1 CALE PICKUP a iol cilia Cath avdesSovsedema saan ash eaten desea au dusoow seaman ate a tae ce 17 4 2 PP e O seats iain a ia A ere oa ene 17 4 3 REDIAL UNREDIAD acai cessed cesses ons tate e ee due bo 17 4 4 CTC OA Eo genres esau ninco o ae 18 4 5 CABE AOR esse sh a di Iii io 18 4 6 AUTOAN WE Rd lcd 18 4 7 HOTIN yeten n a ad 18 4 8 IPPO AMONIO a mene a ee ee 18 Ael OMS aaa E A
44. f switch on the back of the phone to the one side then the phone s LCD screen displays Initializing wait logon Later a ready screen typically displays the date time If your LCD screen displays different information from the above you need refer to the next section Initial setting to set your network online mode If your VoIP phone registers into corporate IP telephony Server your phone is ready to use 2 1 2 Power adaptor connection Make sure that the power you use is comply with the parameters of power adaptor 1 Plug power adaptor to power socket 2 Plug power adaptor s DC output to the DCSV port of C58 C58P to start up 3 There will be displayed black line and INITIALIZING on the screen After finishing startup phone will show greeting current date and time and so forth 4 If phone has registered to the server you can place or answer calls 2 2 Basic Initialization C58 C58P is provided with a plenty of functions and parameters for configuration User needs some network and VoIP knowledge so that user could understand the meanings of parameters In order to make user use the phone more easily and convenient there are basic configurations introduced which is mandatory to ensure phone calls 2 2 1 Network settings Make sure that network is connected already before setting network of phone C58 C58P uses DHCP to get WAN IP configurations so phone could access to network as long as there is DHCP s
45. f the phone by the phone s key board The password is digit User Level Root General This table shows the current user existed User User Level Password Confirm Set account user name Set user level Root user has the right to modify configuration General can only read Set the password Confirm the password Select the account and click the Modify to modify the selected account and click the Delete to delete the selected account General user only can add the user whose level is General 8 3 6 6 REBOOT CONFIG LUPOATE ACCESS REBOOT Reboot Phone Click Reboot button to restart the phone If you modified some configurations which need the phone s reboot to be effective you need click the Reboot then the phone will reboot immediately Notice Before reboot you need confirm that you have saved all configurations 8 3 7 SECURITY 8 3 7 1 WEB FILTER WEB FILTER FIREWALL VPI SECURITY Web Filter Table Start IP Address End IP Address Option Web Filter Table Settings Start IP Address End IP Address Web Filter Setting Enable Web Filter El WEB Filter User could make some device own IP which is pre specified access to the MMI of the phone to config and manage the phone Field name explanation Web Filter Table Settings Add or delete the IP address segments that access to the phone Set initial IP address in the Start IP column Set end IP address in the End IP co
46. figuration parameters except SIP 1 2 or IAX2 s that some parameters cannot be changed such as server address and port User will has different access level with different username and password O Default user with general level Username guest Password guest O Default user with root level Username admin Password admin The default password of phone screen menu 1s 123 8 2 Setting via web browser When this phone and PC are connected to network enter the IP address of the wan port in this phone as the URL e g http xxx xxx xxx xxx or http xxx XXX XXX XXX XXXX If you do not know the IP address you can look it up on the phone s display by pressing Status button The login page is as below picture User Password Language After you configure the IP phone you need click save button in config under Maintenance in the left catalog to save your configuration Otherwise the phone will lose your modification after power off and on 8 3 Configuration via WEB 8 3 1 BASIC 8 3 1 1 STATUS STATUS CALL LOG LAN GUAGE Network a by LAM Connection Mode DHCP IP Address 192 168 10 1 MAC Address 00 38 59 c5 1f 80 DHCP Service Enabled IP Address 192 168 1 30 Bridge Mode Enabled IF Gateway 192 168 1 1 Accounts SIP Line 1 22010192 168 1 2 5060 Registered SIP Line 2 41430m192 168 1 4 5060 Registered lane m 4569 Unapplied Status Field name Explanation Network Shows the configuration informatio
47. ge Please do not damage the power cord If power cord or plug is impaired do not use it it may cause fire or electric shock The plug socket combination must be accessible at all times because it serves as the main disconnecting device Do not drop knock or shake it Rough handling can break internal circuit boards Do not install the device in places where there 1s direct sunlight Also do not put the device on carpets or cushions It may cause fire or breakdown Avoid exposure the phone to high temperature below 0 C or high humidity Avoid wetting the unit with any liquid Do not attempt to open it Non expert handling of the device could damage it Consult your authorized dealer for help or else it may cause fire electric shock and breakdown Do not use harsh chemicals cleaning solvents or strong detergents to clean it Wipe it with a soft cloth that has been slightly dampened in a mild soap and water solution When lightning do not touch power plug or phone line it may cause an electric shock Do not install this phone in an ill ventilated place You are in a situation that could cause bodily injury Before you work on any equipment be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents Table of Content 1 INTRODUCING C58 C58P VOIP PHONE lt a ii iii 6 1 1 THANK YOU FOR YOUR PURCHASING C58 C58P cccccccsececesececeeeeeeececeeceeeeeeceseecesaeeee
48. hen you may be prompted to enter the password then you can listen to your new and old messages 4 9 Programmable Key Configuration The phone has 4 programmable keys which are able to set up to many functions per key The following list shows the functions you can set on the programmable keys and provides a description for each function The default configuration for each key is N A which means the key hasn t been set for any functions 1 Set the type as Memory Key Press Menu gt Settings gt Basic Settings gt Enter gt Keyboard gt DSS Key Settings you have two options Line Key Settings and Function Key Settings choose one you want to make the assignment use the navigation key to choose the type as memory key In the Dial field you have some options such as Normal Speed Dial Intercom BLF Presence and MWI Speed dial You can configure the key as a simplified speed dial key This key function allows you to easily access your most dialed numbers Intercom You can configure the key for Intercom code and it is useful 1n an office environment as a quick access to connect to the operator or the secretary BLF BLF is also called Busy lamp field and it is used to prompt the user to pay attention to the state of the object than has been subscribed and used to cooperate with the server to pick up the phone call You can configure the key for Busy Lamp Field BLF which allows you to monitor the status idle ringing or busy
49. igation keys to highlight the desired one in the Enable Disable Codecs list and press the desired to move to the other list Forward Type Forward Number No Answer Forward Wait Time Transfer Timeout Enable Hot Line Hot Line Number Warm Line Wait Time SIP Encryption SIP Encryption Key RTP Encryption RTP Encryption Key Enable Auto Answer Auto Answer Timeout Enable Session Timer Session Timeout Subscribe for MWI MWI Number Subscribe Period s Conference Type Select call forward mode the default is Off Off Close down calling forward Busy If the phone is busy incoming calls will be forwarded to the appointed phone No answer If there is no answer incoming calls will be forwarded to the appointed phone after a specific Always Incoming calls will be forwarded to the appoint phone immediately The phone will prompt the incoming while doing forward Specify the number you want to forward Specify the No Answer Forward Delay Time if the Forward Type is No answer incoming calls will be forwarded after the no answer forward wait time For the phone supports the transfer of certain special features server set interval time between sending bye and hanging up after the phone transfers a call Specify Hot Line by selecting it Specify Hot Line Number the phone dial the hot line number automatically at hands free mode or handset mode after warm line time Specify the Warm Line Time Enable D
50. ion gt PnP server gt Phone Flash Field name Auto Update Setting Current Config Version Common Config Version CPE Serial Number User Password Config Encrypt Key Common Config Encrypt Key Save Autoprovision Information DHCP Option Setting DHCP Option Setting Custom DHCP Option Plug and Play Enable PnP Auto Provision explanation Show the current config file s version If the version of the configuration downloaded is higher than the version of the running configurations the auto provision would upgrade or stop here If the endpoints confirm the configuration by Digest method the endpoints wouldn t upgrade configuration unless the configuration in the server is different with the running configuration Show the common config file s version If the configuration downloaded and the running configurations are the same the auto provision would stop here If the endpoints confirm the configuration by Digest method the endpoints wouldn t upgrade configuration unless the configuration in the server is different with the running configuration Show CPE Serial Number Specify FTP HTTP HTTPS server Username System will use anonymous if username keep blank Specify FTP HTTP HTTPS server Password Input the Encrypt Key if the configuration file 1s encrypted Input the Common Encrypt Key if the Common Configuration file is encrypted Save the username and password authentication message of htt
51. isable SIP Encryption Set the key for sip encryption Enable Disable RTP encryption Set the key for RTP encryption Enable Auto Answer by selecting it Specify Auto Answer Time the phone auto answers the incoming call after Auto Answer Time Set Enable Disable Session Timer whether support RFC4028 It will refresh the SIP sessions Set the session timeout Enable the Subscribe for MWI by selecting it the phone will send subscribe message for MWI to the SIP Server Specify the MWI Number Please contact your system administrator for the connecting code Different systems have different codes Overtime of resending subscribe packet Suggest using the default configuration Specify the Conference Type if you select the local you needn t input the conference number Conference Number Registration Expire s Enable Service Code DND On Code DND Off Code Always CFwd On Code Always CFwd Off Code Busy CFwd On Code Busy CFwd Off Code Specify the network conference number please contact your system administrator for the network conference number Set expire time of SIP server register default is 60 seconds If the register time of the server requested is longer or shorter than the expired time set the phone will change automatically the time into the time recommended by the server and register again If you want to realize the following function by the server please enter the On Code and Off Code option
52. ize penetration to NAT 8 3 3 4 DIAL PEER This functionality offers you more flexible dial rule you can refer to the following content to know how to use this dial rule When you want to dial an IP address the entry of IP addresses is very cumbersome but by this functionality you can set number 156 to replace 192 168 1 119 here Dial Peer Table Number Destination Port Mode Alias Sut Del Length 156 192 168 1 119 5060 SIP no alias no suffis O When you want to dial a long distance call to Beijing you need dial an area code 010 before local phone number but you can also dial number 1 instead of 010 after we make a setting according to this dial rule For example you want to dial 01062213123 but you need dial only 162213123 to realize your long distance call after you make this setting Dial Peer Table Mumber Destination Port Mode Allas Suffix Del Length da 0 0 0 0 5060 SIP rep 010 no suffis 1 To save the memory and avoid abundant input of user add the follow functions Dial Peer Table Humber Destination Fort Mode Alias Suffis Del Length Joti a 0 0 0 0 5060 SIP add 0 no suffis O daa pan 0 0 0 0 5060 SIP add 0 no suffis O 1 Match any single digit that is dialed If user makes the above configuration after user dials 11 digit numbers started with 13 the phone will send out 0 plus the dialed numbers automatically 2 Specifies a range that will match digit It may be a range a list of ranges separated by commas or a
53. ke Static IP MODE WIZARD PPPoE Settings Service Mame User Password Service Name User Password It will be provided by ISP Input your ADSL account Input your ADSL password Notice Click Finish button after finished your setting IP Phone will save the setting automatically and reboot After reboot you can dial by the SIP account 8 3 1 3 CALL LOG You can query all the outgoing through this page Call Information Start Time Field name Start Time Duration Dialed Calls Duration Dialed Calls Call Log explanation Display the start time of the outgoing record Display the conversation time of the outgoing record Display the account protocol line of the outgoing record 8 3 1 4 LANGUAGE Language Language Selection Greeting Words Greeting Words VOIP PHONE 0 12 characterisi LANGUAGE Field name explanation Language Set the language of phone English is default The greeting words will display on LCD when phone Greeting Words is idle It can support 12 chars the default chars are VOIP PHONE Notice the maximal length of the greeting message is sixteen English characters and five Chinese characters 8 3 2 NETWORK 8 3 2 1 WAN SERVICE PORT DHCP SERVICE TIME amp DATE WAN Status Active IP Address 192 168 1 30 Current Subnet Mask aaa all Current IP Gateway 192 168 1 1 MAC Address 00 38 59 c5 1f 90 WAN Settings Obtain DNS Server Automatically Static IP D
54. klight press Enter and use the navigation keys to set then press the key Save 6 3 Ring Settings 1 Press Menu gt Settings gt Enter gt Basic Settings gt Enter gt Ring Settings gt Enter 2 You can set Ring Volume and Ring Type press Enter and use the navigation keys to set then press the key Save In the Ring Type the default system rings have nine and the custom ringtones have three that can be set through the web page 6 4 Voice Volume 1 Press Menu gt Settings gt Enter gt Basic Setting gt Enter gt Voice Volume gt Enter 2 Use the navigation keys to turn down or turn up the voice volume then press the key Save 6 5 Time amp Date 1 Press Menu gt Settings gt Enter gt Basic Settings gt Enter gt Time amp Date gt Enter 2 You have two options to choose Auto and Manual use the navigation keys to choose then press Save 6 6 Greeting Words 1 Press Menu gt Settings gt Enter gt Basic Settings gt Enter gt Greeting Words gt Enter 2 You can enter the message and press Save it will display in the phone screen when the phone start up 6 7 Language 1 Press Menu gt Settings gt Enter gt Basic Settings gt Enter gt Language gt Enter 2 C58 C58P support three languages you can use the navigation keys to choose The default two languages are English and Chinese 7 C58 CS58P s advanced settings 7 1 Accounts Press Menu gt Enter gt Advanced settings and then input th
55. ll mute Contact DND Do not Disturb aL In hand free mode a T In handset mode In headset mode SMS Missed call Call forward 1 30 1 6 LED introduction Table 1 Programmable key LEDs for BLF LED Status Description Steady green The object is in idle status Slow blinking red The object is ringing Steady red The object is active Fast blinking red The object 1s failed Off No subscribe Table 2 Programmable key LEDs for Presence LED Status Description Steady green The object is online Slow blinking red The object is ringing Steady red The object is active Fast blinking red The object 1s failed Off No subscribe Table 3 Programmable key LEDs for line LED Status Description Steady green The account is active Fast Blinking red There is an incoming call to the account Slow Blinking red The call is on hold Slow Blinking red Registration 1s unsuccessful Off The line is not unapplied or idle Table 4 Programmable key LEDs for MWI LED Status Description Blinking red There are new voice mails Off There 1s no new voice mail Table 5 Power Indication LED LED Status Description Steady red Power on Fast Blinking red There is an incoming call Off Power off 2 Initial connecting and Settings 2 1 Connect the phone 2 1 1 Connect to network Step 1 Connect the IP Phone to the corporate IP telephony network Before you connect the phone to the network please check if your
56. lumn and click Add to add this IP segment You can also click Delete to delete the selected IP segment Web Filter setting Select 1t or not to enable or disable Web Filter Click Apply to make it effective Notice Do not set your visiting IP outside the Web filter range otherwise you cannot logon through the web 8 3 7 2 FIREWALL WEB FILTER FIREWALL VPI SECURITY Firewall Type Enable Input Rules E Enable Output Rules E Firewall Input Rule Table Indes Deny Permit Protocol Sre Address Sre Mask Dest Address Dest Mask Range Port Firewall Output Rule Table Index Deny Permit Protocol Src Address Src Mask Dest Address Dest Mask Range Port Firewall Settings Input Output Sre Address Deny Permit Dest Address Protocol UDP Src Mask Port Range Dest Mask Rule Delete Option Input Output Index To Be Deleted e Firewall Configuration In this web interface you can set up firewall to prevent unauthorized Internet users from accessing private networks connected to the Internet input rule or prevent unauthorized private network devices from accessing the Internet output rule Firewall supports two types of rules input access rule and output access rule Each type supports at most 10 items Through this web page you could set up and enable disable firewall with input output rules System could prevent unauthorized access or access other networks set in rules for security Firewall is also called acce
57. mance Transmit with full capability only when system is idle so cannot guarantee that the transmission speed reach to 100M 8 3 7 4 VPN This web page provides us a safe connect mode by which we can make remote access to enterprise inner network from public network That is to say you can set 1t to connect public networks in different areas into inner network via a special tunnel We l Switchboard E m Physical Network s Pu B sttialing Ordi Mo AE Realizes the logical special line through VPN WEB FILTER Virtual Private Network PN Status IP Address 0 0 0 0 YPN Mode Enable VPN E LeTP Open PN Layer 2 Tunneling Protocol L2TP VPN Server Address lt VPN User E VPN Password 7 VPN Configuration Field name explanation VPN IP Shows the current VPN IP address Select L2TP You can choose only one for current state After you select it you d better save configuration and reboot your phone Enable VPN Select it or not to enable or disable VPN VPN Server Set VPN L2TP Server IP address Address VPN User Set User Name access to VPN L2TP Server VPN Password Set Password access to VPN L2TP Server 8 3 7 5 SECURITY WEB FILTER FIREWALL LA Ph SECURITY Update Security File Select Security File Delete Security File Select Security File Il SIP TLS Files HTTPS Files OpenYPN Files Security Field name explanation Update S
58. n xml format User can restore factory default configuration and reboot the phone If you login as Admin the phone will reset all configurations and restore factory default if you login as Guest the phone will reset all configurations except for VoIP accounts SIP1 2 and IA X2 and version number You can update your configuration with your config file in this web page Web Update Select File TFTP FTP Update Server Address User Password File Name Type Protocol Update Logo File Delete Logo File Logo File Field name Web Update Web Update TFTP FTP Update Server Address User Password File name REBOOT mia vei eS vale needy 4pplication Update Select File Select le Update Explanation Click the browse button find out the config file saved before or provided by manufacturer download it to the phone directly press Update to save You can also update downloaded update file logo picture ring mmiset file by web Set the FTP TFTP server address for download upload The address can be IP address or Domain name with subdirectory Set the FTP server Username for download upload Set the FTP server password for download upload Set the name of update file or config file The default name 1s the MAC of the phone such as 000102030405 Notice You can modify the exported config file And you can also download config file which includes several modules that
59. n on WAN and LAN port including the connect mode of WAN port Static DHCP PPPoE MAC address the IP address of WAN port and LAN port ON or OFF of DHCP mode of LAN port and bridge mod Accounts Shows the phone numbers provided by the SIP LINE 1 2 servers and IA X2 The last line shows the version number and issued date 8 3 1 2 WIZARD CALL LOG WAN Connection Mode Static IP DOHEP PPPoE 000 Wizard Please select the proper network mode according to the network condition C58 C58P provide three different network settings O Static If your ISP server provides you the static IP address please select this mode and then finish Static Mode setting If you don t know about parameters of Static Mode setting please ask your ISP for them O DHCP In this mode you will get the information from the DHCP server automatically need not to input this information artificially O PPPoE In this mode you must input your ADSL account and password You can also refer to2 2 1 Network setting to speed setting your network Choose Static IP MODE click NEXT can config the network and SIP default SIP1 simply also can browse too Click BACK can return to the last page WIZARD Static IP Settings IP Address Subnet Mask IP Gateway DNS Domain ee Primary DNS Secondary ONS IP Address Input the IP address distributed to you Subnet Mask Input the Netmask distributed to you IP Gateway Input the Gateway add
60. need to be imported For example you can download a config file just keep with SIP module After reboot other modules of system still use previous setting and are not lost Type Action type that system want to execute 1 Application update download system update file 2 Config file export Upload the config file to FTP TFTP server name and save it 3 Config fie import Download the config file to phone from FTP TFTP server The configuration will be effective after the phone is reset 4 Phone book export vcf Upload the phonebook file to FTP TFTP server name and save it 5 PhoneBook import vcf Download the phonebook file to phone from FTP TFTP server Protocol Select FTP TFTP server Update Logo File Select File Specify the url of the logo file Delete Logo File Select File Select the logo that you want to delete Logo File Logo File Show the logo file 8 3 6 5 ACCESS You can add or delete user account and change the authority of each user account in this web page LCD Menu Password Settings Menu Password Keyboard Lock Settings PIN to Lock Keyboard Password Enable Keyboard Lock User Settings Wiser admin guest Add User Liser Password Confirm User Level User Management Field name Keyboard Password User Settings User admin quest UPDATE ACCESS User Level Root General Access Configuration explanation Set the password for entering the setting menu o
61. ny number Enable Call Transfer by selecting it Enable Semi Attended Transfer by selecting it Enable Auto Redial by selecting it then the phone reminds whether redial when the caller is busy or rejects Specify the Auto Redial interval Specify the Auto Redial interval Enable Call Completion by selecting it Enable Call Waiting by selecting it Then the phone reminds whether redial when the caller is busy or rejects if it s ok and the phone finds out that the caller 1s idle by sip message 1t will reminds whether redial Enable 3 way conference by selecting it If select it the phone will accept the call even 1f the called number 1s not belong to the phone The phone will hang up and return to the idle automatically at hands free mode Specify Auto Hand down Time the phone will hang up and return to the idle automatically after Auto Hand down Time at hands free mode and play dial tone Auto Hand down Time at handset mode Enable Ring From Handset by selecting it the phone plays ring tone from handset Enable Intercom Mode by selecting it Enable mute mode during the intercom call Intercom Mute Enable Intercom Tone Enable Intercom Barge Enable Silent Mode Turn Off Power Light Emergency Call Number Enable Password Dial Password Dial Prefix Password Length DND Return Code Busy Return Code Reject Return Code Hide DTMF Push XML Server P2P IP Prefix Active URI Limit IP Action URL
62. o submit and add this lease table DHCP Lease Table Delete Lease Table Name lan Select name of lease table click the Delete button will delete the selected lease table from DHCP lease table DNS Relay Enable ONS Relay w Enable Select DNS Relay the default is enabled Click the DNS Relay Apply button to become effective Notice 1 The size of lease table cannot be larger than the quantity of C network IP address We recommend you to use the default lease table and not modify it 2 If you modify the DHCP lease table you need save the configuration and reboot 8 3 2 6 TIME amp DATE Setting time zone and SNTP Simple Network Time Protocol server according to your location you can also manually adjust date and time in this web page DACP SERVICE TIMES DATE Enable SNTP E Enable DHCP Time E Primary Server 209 81 9 7 Secondary Server A Timezone GMT 08 00 Beying Chongqing Hong Kong Urumali Resync Period second s 12 Hour Clock E Date Format Daylight Saving Time Settings Enable m Offset minutests Month Week Day Hour Minute Manual Time Settings Year 7 Month Day Hour tC Minute Field name explanation Simple Network Time Protocol SNTP Settings Enable SNTP Enable SNTP by selecting it Enable DHCP Time Enable DHCP Time by selecting it then the phone will automatically synchronize the standard time Primary Server Set SNTP Primary Server IP address Sec
63. of other SIP account User can dial out on a BLF configured key Please refer to LED Instruction for more detail about the LED status in different situation Note In the Web interface you can also set the pickup number to active the pickup function For example if you set the BLF number as 212 and the pickup number 1s 189 then when there is an incoming call to 212 press the BLF key 1t will call out the 189 automatically to pick up the incoming call on 212 Presence Presence is called present and compared to the BLF it can also check whether object online Note You can subscribe the BLF and presence station of the same number at the same time MWI When the key is configured as MWI you are allowed to access voicemail quickly by pressing this key 2 Set the type as Line You can set these keys as line keys and press it 1t will enter dialer interface 3 Set the type as Key Event You can set these keys as Key Event and the subtype have many options Choose one and it will have corresponding function None Auto Redial Off Auto Redial On Call Back Call Forward DND Flash Headset History Hold Hot Desking Pressing the key you can clear all sip information and register yourself sip information Join Lock Pressing the key you can lock the keyboard Memo MWI Phonebook Pickup Prefix Redial Release Pressing the key you can end the call SMS Transfer Set the type as Dtmf You can config
64. on buttons to highlight your choice press Left Right button to choose Missed Calls Incoming Calls and Outgoing Calls 3 Press the R SEND button to call the last number called 4 Press the programmable keys which are set as speed dial button Then press the Send button or Dial softkey to make the call if necessary 3 2 Answering a Call Answering an incoming call 1 Ifyou are not on another phone lift the handset using or press the Speaker button Answer softkey to answer using the speaker phone or press the headset button to answer the headset 2 If you are on another call press the answer softkey During the conversation you can alternate between Headset Handset and Speaker phone by pressing the corresponding buttons or picking up the handset 3 3 DND Press DND softkey to active DND Mode Further incoming calls will be rejected and the display shows EH icon Press DND softkey twice to deactivate DND mode You can find the incoming call record in the Call History 3 4 Call Forward This feature allows you to forward an incoming call to another phone number The display showed E icon The following call forwarding events can be configured Off Call forwarding is deactivated by default Always Incoming calls are immediately forwarded Busy Incoming calls are immediately forwarded when the phone is busy No Answer Incoming calls are forwarded when the phone is not answered after a specific period To configure C
65. ondary Server Set SNTP Secondary Server IP address Time Zone Select the Time zone according to your location Resync Period Set the time out the default is 60 seconds 12 Hour Clock Switch the time mechanism between 12 hours and 24 hours Default is 24 hours mode Date format Specify the date format Daylight Saving Time Settings Enable Enable daylight saving time Offset minutes Setup the variety length Month Setup start and end month Week Setup start and end week Day Setup start and end day Hour Setup start and end hours Minute Setup start and end minutes Manual Time Settings Manual Time Settings Year Cid Month A Day A Hour A Minute Notice You need specify the above all items 8 3 3 VOIP 8 3 3 1 SIP Set your SIP server in the following interface Basic Settings gt gt Status Registered Domain Realm PO Server Address 192 163 132 Proxy Server Address O O Serwer Port 060 Aa Server Port oOo O O Authentication User 8201 Proxy User fo O Authentication Password Proxy Password sill sa 201 Backup Server Address A Display Name ll Enable Registration Codecs Settings gt gt Disabled Codecs Enabled Codecs Advanced SIP Settings gt gt Forward Type Forward Number No Ans Fwd Wait Time Transter Timeout SIP Encryption SIP Encryption Key RTP Encryption ETF Encryption Key Subscribe For MI MIT Number Subscribe Period Enable Service Code ONO On Code Alwa
66. ou modify the HTTP or telnet port number the new number should be greater than 1024 3 If you set 0 for the HTTP port it will disable HTTP service 8 3 2 5 DHCP SERVICE Saa DHCP SERVICE TIMESDATE DHCP Client Table Leased IP Address Client MAC Address DHCP Lease Table Mare Start IP End IP Leased Time Subnet Mask IP Gateway DNS DHCP Lease Table Settings Leased Table Name O OE Start IP Address O OE End IP Address fs Leased Time A minutets Subnet Mask A IP Gateway fF DNS Server Address O O DHCP Lease Table Delete Leased Table Name DNS Relay Enable ONS Relay Fi DHCP SERVICE Field name explanation DHCP Lease Table IP MAC mapping table If the LAN port of the phone connects to a device this table will show the IP and MAC address of this device DHCP Lease Table Name Start IP End IP Leased Time Metmask Gateway DNS Shows the DHCP Lease Table the unit of Lease time is Minute Lease Table Name Specify the name of the lease table Start IP Address Set the start IP address of the lease table Set the end IP address of the lease table the network End IP Address device connected to LAN port will get IP address between Start IP and End IP by DHCP Subnet Mask Set the Netmask of the lease table IP Gateway Set the Gateway of the lease table Leased Time Set the Lease Time of the lease table DNS Server Set the default DNS server IP of the lease table Click Address the Add button t
67. p https ftp and input ID message in the phone until the url in the server changes Specify DHCP Option DHCP option supports DHCP custom option and DHCP option 66 and DHCP option 43 to obtain the parameters You could choose one method among them the default is DHCP option disable A valid Custom DHCP Option is from 128 to 254 The Custom DHCP Option must be in accordance with the one defined in the DHCP server Enable PnP by selecting 1t than the phone will send SIP SUBSCRIBE messages to a multicast address PnP Server PnP Port PnP Transport PnP Interval Phone Flash Server Address Config File Name Protocol Type Update Interval Update Mode TRO069 Settings Enable TR069 ACS Server Type ACS Server URL when 1t boots up Any SIP server understanding that message will reply with a SIP NOTIFY message containing the Auto Provisioning Server URL where the phones can request their configuration Specify the PnP Server Specify the PnP Server Specify the PnP Transfer protocol Specify the Interval time unit 1s hour Set FTP TFTP HTTP server IP address for auto update The address can be IP address or Domain name with subdirectory Set configuration file s name which need to update System will use MAC as config file name if config file name keep blank For example 000102030405 Specify the Protocol type FTP TFTP or HTTP Specify update interval time unit is hour Different update modes 1 Disable means no up
68. phone will transfer the current call to the third party Blind Transfer on Enable Blind Transfer on On Hook when executing OnHook Blind Transfer hang up after inputting the number that you want to transfer the phone will transfer the current call to the third party Attend Transfer on Enable Attend Transfer on On Hook when executing OnHook Attended Transfer hang up after the third party answers the phone will transfer the current call to the third party Dial Plan Table Plans Add Below is user defined digital map rule Specifies a range that will match digit May be a range a list of ranges separated by commas or a list of digits Match any single digit that is dialed Match any arbitrary number of digits including none Tn Indicates an additional time out period before digits are sent of n seconds in length n is mandatory and can have a value of 0 to 9 seconds Tn must be the last 2 characters of a dial plan If Tn is not specified it 1s assumed to be TO by default on all dial plans RULE 1 8 zz2 9911 14 Cause extensions 1000 8999 to be dialed immediately Cause 8 digit numbers started with 9 to be dialed immediately Cause 911 to be dialed immediately after it is entered Cause 99 to be dialed after 4 seconds Cause any number started with 9911 to be dialed 4 seconds after dialing ceases Notice End with Fixed Length Time out and Digital Map Table can be used simultaneously S
69. pletion Waiting number Press OK when he is in idle it will pop up a prompt Call Completion Call number Press OK the phone will call out the number automatically 5 Ring From Headset 1 Press Menu gt Features gt Enter gt Ring From Headset gt Enter 2 Enable this function through the navigation key the phone connects the headset when the phone has an incoming call it will ring from the headset 5 8 Power Light 1 Press Menu gt Features gt Enter gt Power Light gt Enter 2 Enable this function through the navigation key 9 9 Hide DIMF 1 Press Menu gt Features gt Enter gt Hide DTMF gt Enter 2 Through the navigation key to choose Disabled All Delay Last Show 5 10 Password Dial 1 Press Menu gt Features gt Enter gt Password Dial gt Enter 2 Enable this function you can also set Prefix and Length 6 C58 C58P s basic settings 6 1 Keyboard 1 Press Menu gt Settings gt Enter gt Basic Settings gt Enter gt Keyboard gt Enter 2 There are four items DSS Key settings Programmable Keys Desktop Long Pressed SoftKey You can set up respectively on them Press the key Enter to the interface then use the navigation keys to choose the function for the key according to you want 3 Press the key OK to save 6 2 Screen Settings 1 Press Menu gt Settings gt Enter gt Basic Settings gt Enter gt Screen Settings gt Enter 2 You can set Contrast Contrast Calibration and Bac
70. rd type And the IP phone will not show the record in the call history anymore Set the Busy CFwd Off Code when you choose to disable the busy forward function on your phone it No Answer CFwd On Code No Answer CFwd Off Code Anonymous On Code Anonymous Off Code Keep Alive Type Keep Alive Interval User Agent DTMF Type Local Port Ring Type Enable Via Rport will send message to the server and the server will turn off the function immediately Set the No Answer CFwd On Code when you choose to enable the on answer forward function on your phone it will send message to the server and the server will turn on the function immediately When there are calls to the extension the server will forward it to the set number automatically based the forward type And the IP phone will not show the record in the call history anymore Set the No Answer CFwd Off Code when you choose to disable the busy forward function on your phone it will send message to the server and the server will turn off the function immediately Set the Anonymous On Code When you choose to enable the anonymous call function on your IP phone it will send information to the server and the server will enable the anonymous call function for your IP phone automatically Set the Anonymous Off Code When you choose to disable the anonymous call function on your IP phone it will send information to the server and the server will disable the anonymous
71. ress distributed to you Set DNS domain postfix When the domain which you DNS Domain input cannot be parsed phone will automatically add this domain to the end of the domain which you input before and parse it again Primary DNS Input your primary DNS server address Secondary DNS Input your standby DNS server address WIZARD Quick SIP Settings Display Name tC SY Server Address 192 168 1 2 Server Port Authentication User Authentication rr Password SIP User Enable Registration E Display Name Set the display name Server Address Input your SIP server address Server Port Set your SIP server port Authentication User Input your SIP register account name Authentication Input your SIP register password Password SIP User Input the phone number assigned by your VOIP service provider Enable Registration Start to register or not by selecting it or not WIZARD WAN Connection Mode Static IP Static IP Address 192 166 1 1 79 IP Gateway 192 168 1 1 SIP Server Address 192 168 1 2 Account 2201 Phone Number 8201 Registration Enabled Back Display detailed information that you manual config Choose DHCP MODE click Nest can config SIP default SIP1 simply also can browse too Click Back can return to the last page Like Static IP MODE Choose PPPoE MODE click Nest can config the PPPoE account password and SIP default SIP1 simply also can browse too Click Back can return to the last page Li
72. ry record and display the missed calls on the idle screen Click to talk Enable BLF List BLF List Number SIP Global Settings Strict Branch Enable Group Registration Failure Retry Time Set click to Talk need practical software support Enable BLF List by selecting it BLF list is a function which can monitor the group status 1t 1s not one to one monitoring but the information feedback from the server to decide which BLF list will monitor Specify the BLF List Number Enable the Strict Branch the value of the branch must be in the beginning of z9hG4k in via field of the invite sip message received or the phone won t response to the invite sip message Notice the deployment will become effective in all sip lines Enable Group by selecting it then the phone enable the sip group backup function Notice the deployment will become effective in all sip lines Specify the registration failure retry time if the phone register failed the phone will register again after registration failure retry time Notice the deployment will become effective in all sip lines IAX2 8 3 3 2 Tax Status Unapplied Server Address server Port 369 Account Password Phone Number Local Port 569 Voice Mall Number Yorce Mail Text Echo Test Number tM Echo Test Text echo Refresh Time second s Enable Registration FF Enable G 7294B FF Field name Status Server Address Server Port Account Password Phone N
73. s can t call the phone by anonymous If you choose Disabled the others can call the phone by anonymous 5 3 Dial Plan 1 Press Menu gt Features gt Enter gt Dial Plan gt Enter 2 The following plans you can set Press to Send Timeout to Send Timeout Fixed Length Number Press to Do BXFER BXFER On Onhook AXFER On Onhook You can enable or disable each dial plan 5 4 Dial Peer 1 Press Menu gt Features gt Enter gt Dial Peer gt Enter 2 Press Add to enter the Edit interface and then input some information For example Number 1T Dest 0 0 0 0 Port 5060 Mode SIP Alisa all 3333 Suffix no suffix Del Len 0 Then press Save Then press Save 3 Input 1 number 1234 in the dial interface you can dial out 3333 You can refer to 8 3 3 4 DIAL PEER 5 5 Auto Redial 1 Press Menu gt Features gt Enter gt Auto Redial gt Enter 2 Choose Mode Enabled or Disabled through the navigation key If you choose Enable you also need to set Interval and Times and then press Save 3 After enable auto redial calling out someone if he is 1n busy it will pop up a prompt box whether to auto redial press OK the phone will call out him according the Interval and Times that you set 5 6 Call completion 1 Press Menu gt Features gt Enter gt Call Completion gt Enter 2 Enable the function through the navigation key and then Save 3 Call out others if he 1s in busy it will pop up a prompt Call Com
74. ss list is a simple implementation of a Cisco like access list firewall It supports two access lists one for filtering input packets and the other for filtering output packets Each kind of list could be added 10 items We will give you an instance for your reference Field name Enable Input Rules Enable Output Rules Input Output Deny Permit Protocol Port Range Src Address Des Address Src Mask Dest Mask explanation Select it to Enable Input Rules Select it to Enable Output Rules Specify current adding rule by selecting input rule or output rule Specify current adding rule by selecting Deny rule or Permit rule Filter protocol type You can select TCP UDP ICMP or IP Set the filter Port range Set source address It can be single IP address network address complete address 0 0 0 0 or network address similar to 0 Set the destination address It can be IP address network address complete address 0 0 0 0 or network address similar to Set the source address mask For example 255 255 255 255 means just point to one host 255 255 255 0 means point to a network which network ID is C type Set the destination address mask For example 255 255 255 255 means just point to one host 255 255 255 0 means point to a network which network ID is C type Click the Add button if you want to add a new output rule Then enable out access and click the Apply button So when devices ex
75. the other party to answer When the multiple way calls you can press the arrow keys to select a call 4 C58 C58P s advanced function 4 1 Call pickup Call pickup is implemented by simulating pickup function of PBX it s that when A calls B B rings but no answer at this moment C can hook off and input an appointed prefix plus B s number pick up A s call and talk with A The following chart shows how to configure an appointed prefix in dial peer to have call pick up function 1 means appointed prefix code After making the above configuration C can dial 1 plus B s phone number to pick up A s call User can set prefix in random in the case of no affecting current dialing rules 4 2 Join call When B is calling C A can join in the existing call by inputting an appointed prefix numbers plus B or C number if B or C also supports join call The following chart shows how to configure an appointed prefix in dial peer to have join call function 2 means appointed prefix code After making the above configuration A can dial 2 plus B or C number to join B and C s call User can set prefix in random in the case of no affecting current dialing rules 4 3 Redial Unredial If B is in busy line when A calls B A will get notice busy please hang up If A want to connect B as soon as B 1s in idle he can use redial function at the moment and he can dials an appointed prefix number plus B s number to realize re
76. ttings IP Address 192 168 10 1 Subnet Mask 2552532550 DHCP Service Fj MAT W Port Mirror E Only works in the bridge mode Enable Bridge Mode 2 LAN Config Field name explanation IP Address Specify LAN static IP Subnet Mask Specify LAN Netmask Select the DHCP server of LAN port or not After you DHCP Service modify the LAN IP address phone will amend and adjust the DHCP Lease Table and save the result amended automatically according to the IP address and Netmask You need reboot the phone and the DHCP server setting will take effect NAT Select NAT or not Port Mirror Select Port Mirror or not 1t only works in bridge mode the function of the port mirror is that copy the data stream from the WAN port to the LAN port of the phone Select Bridge Mode or not If you select Bridge Mode Enable Bridge the phone will no longer set IP address for LAN Mode physical port LAN and WAN will join in the same network Click Apply the phone will reboot Notice When LAN IP or bridge mode status is changed the system will reboot If you choose the bridge mode the LAN configuration will be disabled 8 3 2 3 QoS amp VLAN The VOIP phone support 802 1Q P protocol and DiffServ configuration VLAN functionality can use different VLAN IDs by setting signal voice VLAN and data VLAN The VLAN application of this phone is very flexible Do not use YLAN After Switchboard recelved the Broadcast Frame tr
77. umber Local Port Voice Mail Number Voice Mail Text IAX2 Config explanation Shows if the phone has been registered the A X2 server or not Input your A X2 server address Set your AX2 server port the default is 4569 Input your IAX2 register account name Input your IAX2 register password Input your assigned phone number usually it is same you re your IAX2 account name Set your local sport the default is 4569 Specify the voice mail s number Specify the voice mail s name Set echo test number If AX2 server supports echo test Echo Test and echo test number is non numeric system could set Number an echo test number to replace the echo test text So user can dial the numeric number to test echo voice test This function is provided with server to make endpoint to test whether endpoint could talk through server normally Echo Test Text Specify echo test text s name Refresh Time Set expire time of AX2 server register you can set it between 60 and 3600 seconds Enable Start to register the A X2 server or not by selecting it or Registration not Enable G 729AB Enable or disable code G 729 by selecting it or not 8 3 3 3 STUN In this web page you can config SIP STUN STUN By STUN server the phone in private network could know the type of NAT and the NAT mapping IP and port of SIP The phone might register itself to SIP server with global IP and port to realize the device both calling and b
78. ure the key as Dtmf This key function allows you to easily dial or edit dial number 5 Set the type as URL You need to match a XML Phonebook address pressing the button you can directly access the corresponding remote phonebook 6 Set the type as BLF List Key It needs the cooperation with the Broadsoft server The traditional BLF 1s that every number will need to be subscribed so if the numbers that subscribed is so many that it will cause to obstruction However BLF List Key will put the numbers that needed to be subscribed in a group and the phone use the URL of the group to subscribe and analyze the specific information of each number such as number name state and so on according to the notifications from the server Then set the idle Memory key as BLF List Key later if the state of an object changes the corresponding LED will change 0000000090 5 C58 CS58P s other functions 5 1 Auto Handdown 1 Press Menu gt Features gt Enter gt Auto Handdown gt Enter 2 Set the Mode Enable through the navigation key then set Time unit 1s minute then press Save 3 When the call ends after the time that you have set the phone will back to the idle interface 5 2 Ban Anonymous Call 1 Press Menu gt Features gt Enter gt Ban Anonymous Call gt Enter 2 Choose which sip you want to enable Ban Anonymous Call and then press Enter choose Enabled or Disabled through navigation key 3 If you choose Enabled the other
79. your IP address Mask Gateway DNS and press Save to save what you input 5 Press Back six times to return to the idle screen 6 Check the status the screen shows Static the screen shows the IP address and gateway which were set just now 1f the phone could display the right time it shows that Static IP mode takes effect Setting DHCP mode 1 Press Menu gt Settings gt Advanced Settings then enter passwords and choose network gt WAN settings gt Connection Mode enter and choose DHCP through navigation keys and press the Save key 2 Press Back six times to return to the idle screen 3 Check the status the screen shows DHCP if the screen shows the IP address and gateway which was set just now it shows that DHCP mode takes effect 3 C58 C58P s basic function 3 1 Making a call 3 1 1 Call Device You can make a phone call via the following devices 1 Pick up the handset icon will be showed in the idle screen 2 Press the Speaker button 1 icon will be showed in the idle screen 3 Press the Headset button if the headset 1s connected to the Headset Port in advance The icon 4 will be showed in the idle screen You can also dial the number first and then choose the method you will use to speak to the other party 3 1 2 Call Methods You can press an available line button 1f there is more than one account then 1 Dial the number you want to call 2 Press History softkey use the navigati
80. ys CFwd On Code Busy CFwd On Code Mo Ans CF wd On Code anonymous On Code Keep Alive Type User Agent OTMF Type Local Port Ring Tyoe Enable Eport Enable PRACK Enable Long Contact Convert URI Dial Without Registered Ban Anonymous Call Enable ONS SRV Enable Missed Call Log BLF List Number SIP Global Settings gt gt Strict Branch Registration Failure Retry Time Enable Hotline Hotline Number O 120isecondi s Warm Line Wait Time lo second s E 3600 second s SIP Option RPC 4oo3 1 Default a Enable 4uto Answer uto Answer Timeout Enable Session Timer Session Timeout Conference Type Conference Number Registration Expires CNO OF Code Always CFwd Off Code Busy CFwd Off Code Mo Ans CFwd Off Code Anonymous Of Code Keep Alive Interval Server Type RFC Protocol Edition Transport Protocol anonymous Call Edition Keep Authentication Ans With a Single Codec Auto TCP Enable Strict Proxy Enable GRLILI Enable Displayname Quote Enable user phone Click To Talk Enable BLF List Enable Group second s i O Disecondis second s hint second s o o 4 600 second s M second s RFLCSZ61l C o o BEEBE ERBABB FIs al T 4 4 Field name SIP Line SIP Config explanation Choose line to set info about SIP there are 4 lines to choose You can switch by Load button Basic Settings Status Server Address S
81. ystem will stop dialing and send number according to your set rules 8 3 44 CONTACT You can input the name phone number and select ring type for each name here REMOTE CONTAC WEB DIAL Phonebook Table Group Hangup Indes Hame Office Number Mobile Number Other Number Ring Type Group Fl Page ali Add Contact Name Rina type office Number i oe Mobile Number Jime Other Number ne Group Setting Unselected Selected Import Contact List Select File Export Contact List Group Option Group Mame Ring Type Blacklist Settings Blacklist Item Type Value Oo Line Blacklist Contact Field name explanation Phonebook Table Name Shows the name corresponding to the phone number Hangup Index Mame Office Mum Mobile Mum Other Mum Ring Type Shows the detail of current phonebook Notice the maximum capability of the phonebook is 500 items you can select many or a contact to add to group and add to blacklist and delete many or a contact and delete all contacts Add Contact List Name Specify the name corresponding to the phone number Office Number Specify the office number Mobile Number Specify the mobile number Other Number Specify the other number Ring Type Specify the ring type for the phone number Line Specify the sip line for the each number Group setting Select the group from the unselected group to selected list for the contact you can select many groups for the contact

Fanvil Product User Manual IP Phone Model: C58/C58P

Contents

Download Pdf Manuals

Related Search

Related Contents