Home

P1510D User`s Guide

1. AC Adapter Getting Started DC Power Plug DC Output Cable Figure 3 1 Connecting the AC Adapter Power Sources Your LifeBook P Series notebook Tablet PC has three possible power sources a primary Lithium ion battery an AC adapter or an optional Auto Airline adapter CONNECTING THE POWER ADAPTERS The AC adapter or optional Auto Airline adapter provides power for operating your system and charging the battery Connecting the AC Adapter 1 Plugthe DC output cable into the DC power jack of your notebook Tablet PC 2 Plugthe AC adapter into an AC electrical outlet Figure 3 1 Connecting the Optional Auto Airline Adapter 1 Plug the DC output cable into the DC power jack on your notebook Tablet PC 2 Plug the Auto Airline adapter into the cigarette lighter of an automobile with the ignition key in the On or Accessories position OR 3 Plug the Auto Airline adapter into the DC power jack on an airplane seat Switching from AC Adapter Power or the Auto Airline Adapter to Battery Power 1 Be sure that you have a charged battery installed 2 Remove the AC adapter or the Auto Airline adapter GI The Lithium ion battery is not charged upon purchase Initially you will need to connect either the AC adapter or the Auto Airline adapter to use your system 29 y Lifebook P Series Notebook Tablet PC Starting Your LifeBook POWER ON The Suspend Resume button is used to turn on
2. B6FH 8231 02EN 00 WARNING Handling the cord on this product or cords associated with accessories sold with this product will expose you to lead a chemical known to the State of California to cause birth defects or other reproductive harm A Wash hands after handling C DECLARATION OF CONFORMITY according to FCC Part 15 Responsible Party Name Address Telephone Declares that product Fujitsu Computer Systems Corporation 1250 E Arques Avenue MS 122 Sunnyvale CA 94085 408 746 6000 Model Configuration LifeBook P1510D Notebook LifeBook P1510D Tablet PC Complies with Part 15 of the FCC Rules This device complies with Part 15 of the FCC rules Operations are subject to the following two conditions 1 This device must not be allowed to cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation y Lifebook P Series Notebook Tablet PC IMPORTANT SAFETY INSTRUCTIONS This unit requires an AC adapter to operate Use only UL Listed Class 2 Adapters with an output rating of 16 VDC with a minimum current of 2 5 A AC adapter output polarity IO When using your notebook Tablet PC equipment basic safety precautions should always be followed to reduce the risk of fire electric shock and injury to persons including the following Do not use this product near water for example near a bathtub
3. Do not operate the system in areas where the air vents can be obstructed such as in tight enclosures or on soft surfaces like a bed or cushion Do not attempt to service the computer yourself Any unauthorized service performed on the computer will void the warranty Always follow installation instructions closely Keep it away from food and beverages If you accidentally spill liquid on your notebook Tablet PC 1 Turn it off 2 Position it so that the liquid can run out 3 Letit dry out for 24 hours or longer if needed 4 Ifyour system will not boot after it has dried out call your support representative Do not use your notebook Tablet PC in a wet environ ment near a bathtub swimming pool Always use the AC adapter and batteries that are approved for your system Avoid exposure to sand dust and other environmental hazards Care and Maintenance Do not expose your notebook Tablet PC to direct sun light for long periods of time as temperatures above 140 F 60 C may damage your system Keep the covers closed on the connectors and slots when they are not in use Do not put heavy or sharp objects on the computer If you are carrying your notebook Tablet PC in a briefcase or any other carrying case make sure that there are no objects in the case pressing on the lid Do not drop your notebook Tablet PC Do not touch the screen with any sharp objects Cleaning your LifeBook Always disc
4. lt Example gt Computer A 192 168 100 2 255 255 255 0 Computer B 192 168 100 3 255 255 255 0 Computer C 192 168 100 4 255 255 255 0 Computer X 192 168 100 254 255 255 255 0 98 Specifications Wireless LAN User s Guide Item Specification Type of network The Atheros AR5002X WLL4070 and the Intel PRO Wireless 2915ABG WM3B2915ABG Network Connections WLAN devices conform to IEEE 802 11a and 802 11b g Wi Fi based Transfer rate Automatic switching IEEE 802 11a g 54 Mbps maximum data rate IEEE 802 11b 11 Mbps maximum data rate Active frequency 802 11b g 2400 2473 MHz 802 11a 5050 5850 MHz Number of channels 802 11a 8 independent channels 802 11b g 11 channels 3 non overlapping channels Security Encryption Types WEP TKIP AES WPA 1 0 compliant Encryption key lengths supported 64 bits 128 bits and 152 bits Atheros module using AES encryption only 802 1x EAP Maximum recommended number of computers to be connected over wireless LAN during ad hoc connection 10 units or less Wi Fi based indicates that the interconnectivity test of the organization which guarantees the interconnectivity of wireless LAN Wi Fi Alliance has been passed Encryption with network key WEP is performed using the above number of bits however users can set 40 bits 104 bits after subtracting the fixed length of 24 bits Dep
5. 86 configuration u un ar rs Fe Ruh 89 deactivating the WLAN device 87 devices covered by this document 86 IP address information ooooooccconcocro o 98 modes 222222 a ea e 86 specifications 0 cece eee eee 99 troubleshooting 0 eee eee ee ees 95 using Atheros Client Utility software 90 using Intel PROSet software ooooooooo 89 wireless LAN glossary ooooooomommmm o o 96 wireless network considerations 87 WLAN On Off Switch 0 0 0 eee eee ee eee 8 11 113 LifeBook P Series Notebook Tablet PC 114
6. Copyright Copyright amp Trademark Information Fujitsu Computer Systems Corporation has made every effort to ensure the accuracy and completeness of this document However as ongoing development efforts are continually improving the capabilities of our products we cannot guarantee the accuracy of the contents of this document We disclaim liability for errors omissions or future changes Fujitsu the Fujitsu logo and LifeBook are registered trademarks of Fujitsu Limited Microsoft MS DOS and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and or other countries Atheros and Super AG are registered trademarks of Atheros Communications Inc Adobe Acrobat and Acrobat Reader are either regis tered trademarks or trademarks of Adobe Systems Incorporated in the United States and or other coun tries Realtek is a trademark of Realtek Semiconductor Corpo ration Bluetooth is a registered trademark of Bluetooth SIG Inc All other trademarks mentioned herein are the property of their respective owners O Copyright 2006 Fujitsu Computer Systems Corpora tion All rights reserved No part of this publication may be copied reproduced or translated without prior written consent of Fujitsu Computer Systems Corpora tion No part of this publication may be stored or trans mitted in any electronic form without the written consent of Fujitsu Computer Systems Corporation
7. TROUBLESHOOTING Troubleshooting Identifying the Problem Specific Problems 0 0 000 Troubleshooting Table Power On Self Test Messages Modem Result Codes 2 222220 Restoring Pre installed Software Restoring the Factory Image Automatically Downloading Driver Updates CARE AND MAINTENANCE Care and Maintenance LifeBook P Series NoteBook Tablet PC Keyb0atdis 2422 Batteries 22 2 4204 nenne Optional Floppy Disk Drive and Floppy Disks Optional Optical Drive and Discs RA un ne en en 7 SYSTEM SPECIFICATIONS Specifications Physical Specifications Processing Specifications Memory Storage Specifications Display Specifications Interface Specifications Power Specifications oooo o Environmental Specifications Agency Approval Specifications Additional Specifications Regulatory Information GLOSSARY Glossaries a ceteris ae APPENDIX A INTEGRATED WIRELESS LAN USER S GUIDE Before Using the Wireless LAN Wireless LAN Modes Using this Device 86 Wireless Network Considerations 87 Deactivating the WLAN Device 87 Activating the WLAN Device 88 Configuration of the WLAN Device Flow of Operat
8. and the sub assemblies inside your notebook Tablet PC Byte 8 bits of parallel binary information Cache Memory A block of memory built into the micro processor which is much faster to access than your system RAM and used in specially structured ways to make your overall data handling time faster CardBus A faster 32 bit version of the PC Card interface which offers performance similar to the 32 bit PCI architecture CD ROM Compact disk read only memory This is a form of digital data storage which is read optically with a laser rather than a magnetic head A typical CD ROM can contain about 600MB of data and is not subject to heads crashing into the surface and destroying the data when there is a failure nor to wear from reading Channel The frequency band of wireless LAN to be used in communications over wireless LAN or at the access point CMOS RAM Complementary metal oxide semiconductor random access memory This is a technology for manufacturing random access memory which requires very low levels of power to operate Command An instruction which you give your operating system Example run a particular application or format a floppy disk Configuration The combination of hardware and software that makes up your system and how it is allocated for use CRT Cathode Ray Tube A display device which uses a beam of electronic particles striking a luminescent screen It produces a visual image by varying the po
9. OmniPass does not actually change the credentials of the password protected resource If John were to go to an Internet cafe to access his webmail he would need to enter his original webmail credentials John_02 and tablet to gain access If he attempts his OmniPass user credentials on a system other than where he enrolled that OmniPass user he will not gain access The basic enrollment procedure assumes you have no hardware authentication devices or alternate storage locations that you wish to integrate with OmniPass If you desire such functionality consult the appropriate sections after reviewing this section Basic Enrollment The Enrollment Wizard will guide you through the process of enrolling a user Unless you specified other wise after OmniPass installation the Enrollment Wizard will launch on Windows login If you do not see the Enrollment Wizard you can bring it up by clicking Start on the Windows taskbar select Programs select Softex click OmniPass Enrollment Wizard 1 Click Enroll to proceed to username and password verification By default the OmniPass Enrollment Wizard enters the credentials of the currently logged in Windows user 2 Enter the password you use to log in to Windows This will become the master password for this OmniPass user In most cases the Domain value will be your Windows computer name In a corpo rate environment or when accessing corporate resource
10. See Automatically Downloading Driver Updates on page 61 Re Installing Individual Drivers and Applications The Drivers and Applications CD can be used to selec tively re install drivers and or applications that may have been un installed or corrupted There may be certain free third party applications pre installed on your system that are not on the DAR CD The latest versions of the applications can be downloaded from the third party s website To re install drivers and or applications 1 Boot up the system and insert the DAR CD after Windows has started A Fujitsu Installer screen is displayed after the CD is inserted After reading the License Agreement click I agree A window will appear containing a list of applica tions drivers and utilities that you can install from the Drivers and Applications CD The components listed are color coded in terms of their install status Blue indicates that the component can be installed Green indicates that the component needs to be i installed separately Grey indicates a component that is already installed grey items can be reinstalled but prior to installation you will receive a reminder that the component is already installed 4 60 In the list check off all the components you want to install If you want to install all components click Select All Clicking Select All will select all of the blue coded components y
11. multiplication or division and enter decimal points using the keys designated as ten key function keys The keys in the numeric keypad are marked on the front edge of the key to indicate their secondary func tions Figure 2 16 WINDOWS KEYS Your LifeBook P Series notebook Tablet PC has two Windows keys a Start key and an Application key The Start key displays the Start menu This button functions the same as your onscreen Start menu button The Application key functions the same as your right mouse button and displays shortcut menus for the selected item Please refer to your Windows documentation for additional information regarding the Windows keys Figure 2 16 CURSOR KEYS The cursor keys are the four arrow keys on the keyboard which allow you to move the cursor up down left and right in applications In programs such as Windows Explorer it moves the focus selects the next item up down left or right Figure 2 16 FUNCTION KEYS Your system has 12 function keys F1 through F12 The functions assigned to these keys differ for each applica tion You should refer to your software documentation to find out how these keys are used Figure 2 16 En Key The Fn key provides extended functions for the notebook Tablet PC and is always used in conjunction with another key Fn F3 Pressing F3 while holding Fn will toggle the Audio Mute on and off Fn F4 Pressing F4 while ho
12. settings are not known to you please consult with your network administrator for the correct settings Choosing this option opens the 802 1x EAP type drop down menu Options include TLS PEAP and LEAP Pre Shared Key Enables the use of pre shared keys that are defined on both the access point and the station This is where static WEP keys are entered Click the Configure button to fill in the Define Pre Shared Keys window None No security 9 Click OK 10 Click the Advanced tab 11 The Advanced tab allows for the configuration of the options detailed in the table below Field Name Description Power Save Options are Maximum Normal or Mode Off Network Type Options are AP Infrastructure or Ad Hoc 802 11b Specifies the preamble setting in Preamble 802 11b The default setting is Short and Long Access Point mode which allows both short and long headers in the 802 11b frames Set to Long Only to override allowing short frames Transmit Options are 100 50 25 Power Level 12 5 or Lowest transmit power OmW Wireless Mode Specifies 5 GHz 54 Mbps 5 GHz 108 Mbps 2 4 GHz 11 Mbps or 2 4 GHz 54 Mbps operation in an access point network Wireless Mode when Starting Specifies 5GHz 54 Mbps 5 GHz 108 Mbps 2 4 GHz 11 Mbps or 2 4 GHz Ad Hoc 54 Mbps to start an Ad Hoc network Network if no matching network name is found after scanning all availa
13. the telephone company may request that you disconnect the equipment until the problem is resolved The equipment cannot be used on public coin service provided by the telephone company Connection to party line service is subject to state tariffs Contact the state public utility commission public service commis sion or corporation commission for information If your home has specially wired alarm equipment connected to the telephone line ensure the installation of this computer does not disable your alarm equip ment If you have any questions about what will disable alarm equipment consult your telephone company or a qualified installer The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone fax machine unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission the date an time it is sent and an identification of the business or other entity or other individual sending the message and the telephone number of the sending machine or such busi ness other entity or individual 73 y Lifebook P Series Notebook Tablet PC DOC INDUSTRY CANADA NOTICES Notice to Users of Radios and Television This Class B digital apparatus meets all requirements of Canadian Interference Causing Equipment Regulations CET appareil num rique de la class B respe
14. 0 0 20 eee eee 15 Installing Click Mel 31 Display Panel Opening the Display Panel 16 Using the System asaTablet 16 Adjusting Display Panel Brightness 17 SS P Series Notebook Tablet PC Power Management Suspend Resume Button oo oo oo o o o 32 Standby Mode ooo 32 Hibernate Mode 0 000 eee ee eee 33 Display Timeout 0 2005 33 Hard Disk Timeout 0 0 33 Windows Power Management 33 Restarting the System 2222220 33 POWER OFF in as ne a ku 34 USER INSTALLABLE FEATURES Lithium ion Battery Recharging the Battery 2222220 37 Replacing the Battery 2 38 Memory Upgrade Module Installing Removing Memory Upgrade Modules 39 Checking the Memory Capacity 40 Secure Digital Media Inserting Removing SD Cards 41 Compact Flash Cards Inserting Compact Flash CardS 42 Removing Compact Flash Cards 43 Port Replicator Port Replicator Components 44 Attaching Detaching Port Replicator 44 Device Ports Modem RJ 11 Jack ooooocococcc oo 46 Internal LAN RJ 45 jack 2 2 46 Docking POT osae iaa ost u 46 Universal Serial Bus Ports 46 Microphone Jack 2 2222 n seen 46 Headphone Jack 2222222 46 External Video Port 2222222 cer 47
15. 0 002000205 3 Funetion Keys comite jc nen 19 Fujitsu Contact Information 3 LifeBook Application Panel Waranty s eras a ee waere 3 Changing Button Functions 21 2 Quick Point Device Touch Screen CICKING iia ee 22 GETTING TO KNOW Double Clicking oooooooooo 22 YOUR LIFEBOOK Dragging oro eap ya ea 22 Quick Point Control Adjustment 23 Overview Touch Screen ipie iie e ia e eee 23 Unpacking cetreria to 7 Volume Control Optional Accessories oooooococoo o 7 Controlling the Volume 25 Locating the Controls and Connectors Front and Display Components 9 3 Left Side Panel Components 10 Right Side Panel Components 11 USING YOUR LIFEBOOK Rear Panel Components 12 Bottom Components 002 00 e eee 13 Power Sources Status Indicators Connecting the Power Adapters 29 Power Indicator 00000 eee eee 14 Starting Your LifeBook AC Adapter Battery Charging Indicator 14 Power Onisapa tey e ed et 30 Battery Level Indicator 14 Boot Sequence 00 00 0000 0 30 Hard Drive Access Indicator 14 BIOS Setup Utility 30 NumLk Indicator 222222222 00 15 Booting the System 0 05 31 CapsLock Indicator noona nananana 15 Registering Your Notebook Tablet PC 31 SerLk Indicator 2 2
16. 0 ports allow you to connect USB devices USB 2 0 ports are backward compatible with USB 1 1 devices External Monitor Port The external monitor port allows you to connect an external VGA or SVGA monitor Note that if a Port Replicator is attached you must use the external monitor port on the Port Replicator not the one on your system LAN RJ 45 Jack The LAN jack allows you to connect a LAN to the Port Repli cator Note that when the system is attached to the Port Repli cator the LAN Jack on the Port Replicator should be used not the one on the system 44 Docking Port The docking port connects the Port Replicator to your LifeBook notebook Tablet PC Port Replicator Release Latch Pull the Port Replicator Release latch away from the Port Repli cator to remove the Port Replicator from your notebook Tablet PC ATTACHING PORT REPLICATOR To attach the Port Replicator align the Port Replicator connector on the bottom of your notebook Tablet PC with the connector on the Port Replicator and push the corners down simultaneously Figure 4 9 Figure 4 9 Attaching the Port Replicator DETACHING PORT REPLICATOR To detach the Port Replicator 1 Pull the Port Replicator s release latch away from the Port Replicator to release it from your notebook Tablet PC Figure 4 10 User Installable Features Figure 4 10 Unlatching the Port Replicator 2 Pull the notebook Tablet PC away from the Port Replicator to de
17. Advanced Configuration and Power Interface Active Matrix Display A type of technology for making flat panel displays which has a transistor or similar device for every pixel on the screen AdHoc A designation for wireless LAN network configuration It indicates a form of communication limited to those personal computers which have wireless LAN function For details refer to Ad hoc mode on page 86 ADSL Asymmetric Digital Subscriber Line Technology for transporting high bit rate services over ordinary phone lines Auto Airline Adapter A device which converts the DC voltage from an auto mobile cigarette lighter or aircraft DC power outlet to the DC voltage needed to power your notebook Tablet PC BIOS Basic Input Output System A program and set of default parameters stored in ROM which tests and operates your notebook Tablet PC when you turn it on until it loads your installed operating system from disk Information from the BIOS is transferred to the installed operating system to provide it with informa tion on the configuration and status of the hardware Bit An abbreviation for binary digit A single piece of information which is either a one 1 or a zero 0 bps An abbreviation for bits per second Used to describe data transfer rates Boot To start up a computer and load its operating system from disk ROM or other storage media into RAM Bus An electrical circuit which passes data between the CPU
18. Any software that contains audio files will also contain a volume control of its own If you install an external audio device that has an independent volume control the i hardware volume control and the software volume control will interact with each other It should be noted that if you set your software volume to Off you will override the external volume control setting CONTROLLING THE VOLUME The volume can be controlled in several different ways Volume can be set from within the Volume Control on the Taskbar Volume can be controlled with the F8 and F9 func tions keys Pressing F8 repeatedly while holding Fn will decrease the volume of your notebook Tablet PC Pressing F9 repeatedly while holding Fn will increase the volume of your notebook Tablet PC There are twenty six levels through which the function keys cycle Volume can be controlled by many volume controls that are set within individual applications Certain external audio devices you might connect to your system may have hardware volume controls Each source discussed above puts an upper limit on the volume level that must then be followed by the other sources We recommend that you experiment with the various volume controls to discover the optimal sound level Getting to Know Your LifeBook 25 26 LifeBook P Series Notebook Tablet PC 3 Using Your LifeBook 28 LifeBook P Series Notebook Tablet PC
19. Boot menu See BIOS Setup Utility on page 30 your operating system You have a secured system requiring a password to load Make sure you have the right password Enter the setup utility and verify the Security settings and modify them as accordingly See BIOS Setup Utility on page 30 An error message is displayed Power On Self Test POST on the screen during the boot has detected a problem sequence See the Power On Self Test POST messages to deter mine the meaning and severity of the problem Not all messages are errors some are simply status indicators See Power On Self Test Messages on page 58 55 y Lifebook P Series Notebook Tablet PC Problem Possible Cause Possible Solutions Your system display won t turn on when the system is turned on or when the system has resumed The system may be password protected Check the status indicator panel to verify that the Security icon is blinking If it is blinking enter your password Your notebook Tablet PC appears to change setup parameters when you start it BIOS setup changes were not saved when you made them and exited the BIOS setup utility returning it to previous settings Make sure you select Save Changes And Exit when exiting the BIOS setup utility The BIOS CMOS back up battery has failed Contact your support representative for repairs This is not a user serviceable p
20. Double clicking If the interval between clicks is too long the double click will not be executed Parameters for the Quick Point can be adjusted from the Mouse dialog box located in the Windows Control Panel iJ DRAGGING Dragging means pressing and holding the left button while moving the cursor To drag move the cursor to the item you wish to move Press and hold the left button while moving the item to its new location and then release it Figure 2 21 DORA 0 gt JIDOQOL JO J Figure 2 21 Dragging QUICK POINT CONTROL ADJUSTMENT The Windows Control Panel allows you to customize your Quick Point with selections made from within the Mouse Properties dialog box There are three aspects of Quick Point operation which you can adjust Buttons This tab lets you set up the buttons for right or left handed operation in addition to setting up the time interval allowed between clicks in double click ing Pointers This tab lets you set up the scheme for the cursor depending on its functionality Pointer Options This tab lets you set up a relation between the speed of your finger motion and the speed ofthe cursor It also allows you to enable a Pointer Trail for the cursor arrow TOUCH SCREEN The integrated Touch Screen allows you to use either the included stylus or your fingertip as a pointing device Do not use excessive force when tapping or writing on the screen with the styl
21. Fujitsu logo appears You will enter the BIOS Setup Utility 2 Using the arrow keys go to the Boot menu 3 Arrow down to the Boot Device Priority submenu Press Enter 4 If Optical Media Drive or CD ROM Drive is not at the top of the list arrow down to the drive in the list and press the space bar or the key to move it to the top of the list The system attempts to boot from the devices in the order in which they are listed Note that the BIOS for some systems will indicate CD ROM Drive even when a DVD drive is connected 5 Ifyou have an external drive connected proceed to step 6 otherwise proceed to step 7 6 Ifyou have an external drive connected Select the Advanced menu in the BIOS window Scroll down to the USB Features submenu and press the Enter key to open it If Legacy USB Support is disabled press the space bar to enable it Scroll down to SCSI SubClass Support and press the space bar to enable it 7 Press F10 then click on Yes to exit the BIOS Setup Utility and return to the boot process After you have changed the boot priority you can restore a backup image when you are booting up Procedure 1 Turn on the power to your system 2 Ensure that you have a device that can read CDs either installed in your system or attached exter nally to it Insert the Restore Disc into the drive tray 4 Reboot your system After the system reboots follow th
22. The maximum data size that can be transferred at a time through the Internet or other networks You can set a smaller MTU size to obtain successful communication if you have difficulty transferring data due to the fact that the maximum size is too large Network authentication The method of authentication performed by wireless LAN clients to connect with the access point There are two types open system authentication and shared key authentication The type of authentication must be set to each client and also coincide with the setting of access point with which to communicate Network authentica tion is sometimes called authentication mode Network key Data that is used for encrypting data in data communi cation The personal computer uses the same network key both for data encryption and decryption therefore it is necessary to set the same network key as the other side of communication Network name SSID Security Set Identifier When a wireless LAN network is configured grouping is performed to avoid interference or data theft This grouping is performed with Network name SSID In order to improve security the network key is set allowing no communication unless Network name SSID coincides with the network key NTSC National TV Standards Commission The standard for TV broadcast and reception for the USA Open system authentication One of network authentication types for wireless LAN Since there is no c
23. Your software may not have the correct driver active See your software documentation and activate the correct driver 53 y Lifebook P Series Notebook Tablet PC Problem Possible Cause Possible Solutions You have installed a USB device but your notebook Tablet PC does not recognize the device or the device does not seem to work properly continued Your device and another device are assigned the same I O address Check all I O addresses located within the BIOS setup utility and any other installed hardware or software to make sure there are no duplications Power Failures You turn on your notebook Tablet PC and nothing seems to happen The installed battery is completely discharged or there is no power adapter AC or Auto Airline installed Check the Status Indicator Panel to determine the pres ence and condition of the battery See Status Indica tors on page 14 Install a charged battery or a Power adapter The battery is installed but is faulty Use the Status Indicator Panel to verify the presence and condition of the battery See Status Indicators on page 14 Ifa battery is indicating a short remove that battery and operate from another power source or replace that battery The battery is low Check the Status Indicator Panel to determine the pres ence and condition of the battery See Status Indica tors on page 14 Use a Power adap
24. a built in color display with a passive digitizer and brings the computing power of desktop personal computers PCs to a versatile portable environment This manual explains how to operate your LifeBook P Series notebook Tablet PC s hardware and built in system software Your notebook Tablet PC comes with the Windows XP or Windows Tablet PC Edition 2005 operating system pre installed The operating system installed on your computer determines whether your system is classified as a notebook or Tablet PC Li Your LifeBook P Series notebook Tablet PC is a completely self contained unit with an active matrix TFT color LCD display The system has a powerful interface that enables it to support a variety of optional features Conventions Used in the Guide Keyboard keys appear in brackets Example Fn F1 Esc Enter and Ctrl Pages with additional information about a specific topic are cross referenced within the text Example See page xx On screen buttons or menu items appear in bold Example Click OK to restart your notebook DOS commands you enter appear in Courier type Example Shutdown the computer The information icon highlights information that will enhance your understanding of the subject material Li The caution icon highlights information that is important to the safe operation of your computer or to the integrity of your files Please read all caution inform
25. as microwave ovens operate in the same 2 4GHz frequency range that IEEE 802 11b g devices operate in Interference by microwaves does not occur with IEEE 802 11a radio which operates in the 5 GHz RF band Wireless devices that transmit in the 2 4GHz fre quency range may interfere with the operation of WLAN devices in IEEE 802 11b g modes Symptoms of interference include reduced throughput intermit tent disconnects and large amounts of frame errors It is HIGHLY recommended that these interfering devices be powered off to ensure the proper operation of the WLAN device DEACTIVATING THE WLAN DEVICE Deactivation of the WLAN device may be desired in certain circumstances to extend battery life or where certain environments require it i e hospitals clinics airplanes etc Fujitsu mobile computers employ two methods with which to deactivate the WLAN device Using the Wireless On Off Switch In Windows using the Intel PROSet Software or Atheros Client Utility software An optional hub for a wired LAN may be required depending upon the type of access point used 87 y Lifebook P Series Notebook Tablet PC Deactivation using the Wireless On Off Switch The WLAN device can be deactivated quickly and effi ciently by toggling the Wireless On Off Switch to the Off position Figure A 3 The Wireless On Off switch has no effect on non Wire less LAN models Wireless LAN On Off Switch Figur
26. automatic profile switching Support for most industry standard security solutions is contained in this software FLOW OF OPERATIONS 1 Activate the WLAN Device See Activating the WLAN Device on page 88 for more information 2 Configure the Wireless Network parameters Enter the network name SSID Choose the appropriate WLAN architecture Ad Hoc or Infrastructure Choose Authentication method Open Shared WPA Enterprise WPA2 Enterprise WPA Personal or WPA2 Personal Ifusing static WEP keys enter static WEP key and choose key index 3 Configure network settings See Configure Net work Parameters on page 89 for more information TCP IP settings Workgroup or Domain settings CONFIGURATION USING INTEL PROSET SOFTWARE This section explains the procedure to properly configure the WLAN device using the Intel PROSet Soft ware Pre defined parameters will be required for this procedure Please consult with your network adminis trator for these parameters Network Name Also known as the SSID Network Key WEP Required if using static WEP keys Authentication Type Open Shared WPA or WPA PSK Procedure 1 Activate the WLAN device using either the Wire less On Off Switch or the Intel PROSet software 2 Click the Start button first and then All Pro grams 3 Click the icon Intel PROSet Wireless to execute the Intel PROSet Wireless software 4 Click the Add button The G
27. caring for the cards a hair dryer or heater to dry discs When you don t have a CF Card installed in your system you should be sure to install the CF Card slot inserts that came with your system These will help to keep dust and dirt out of your system If a disc is dirty use only a disc cleaner or wipe it with a clean soft lint free cloth starting from the inner edge and wiping to the outer edge 67 68 LifeBook P Series Notebook Tablet PC 7 System Specifications 70 LifeBook P Series Notebook Tablet PC Specifications This section provides the hardware and environmental specifications for your LifeBook P Series notebook Tablet PC Specifications of particular configurations will vary CONFIGURATION LABEL Your LifeBook P Series notebook Tablet PC has a configuration label located on the bottom See figure 2 8 on page 13 for location This label contains specific information regarding the options you ve chosen for your notebook Tablet PC Following is an example label and information on how to read your own configura tion label Part Number Configuration ID Configuration PIN APZXXXXXXXXXXXXX FPC P N FRCMXXXXX P1500 PM ULV 753 8 9 WSVGA 256M 60G MODEM LAN WLAN WIN XP L IL JL IL JL IL JL J I Processor Memory Communications odel Screen Hard Drive Operating ize System Figure 7 1 Configuration Label LifeBook P Series notebook Tabl
28. completely before recharging The charge times will be longer if your system is in use while the battery is charging If you want to charge the battery more quickly put your system into Standby mode or turn it off while the adapter is charging the battery See Power Manage ment on page 32 Li Low Battery State When the battery is running low the Battery Level indi cator will glow red If you do not respond to the low battery alarm the batteries will continue to discharge until they are too low to operate Your notebook Tablet PC will then go into Standby mode to try and protect your data for as long as possible There is no guarantee that your data will not be lost once the system reaches this point Make sure that the Battery Charging indicator and the Battery Level indicator icon on the Status Indicator Panel light Using heavy current devices such as a modem or frequent CD ROM and PCMCIA powered external device accesses may prevent charging completely Once the low battery indicator appears you must save all your data and put your notebook Tablet PC into Standby mode until you can provide a new power source You should provide a charged battery or AC or Auto Airline Adapter as soon as possible When you are in Standby mode there must always be at least one power source active If you remove all power sources while your notebook Tablet PC is in Standby mode any data that has n
29. corner of the screen or Click the Start button select Settings and click Control Panel if you are using Windows XP you will see the Control Panel directly in the Start menu click it then click Switch to Classic View Double click Softex OmniPass in the Control Panel and the OmniPass Control Center will appear If it does not appear then the program is not properly installed or Click the Start button select Programs and from the submenu select the Softex program group from that submenu click OmniPass Control Center 2 Select the About tab at the top of the OmniPass Control Panel The About tab window appears with version information about OmniPass Uninstalling OmniPass For uninstallation OmniPass requires that the user uninstalling OmniPass have administrative privileges to the system If your current user does not have administrative privileges log out and then log in with an administrator user before proceeding with OmniPass uninstallation To remove the OmniPass application from your system 1 Click Start on the Windows taskbar Select Settings and then Control Panel Double click Add Remove Programs Select OmniPass and then click Change Remove Follow the directions to uninstall the OmniPass application 5 Once OmniPass has finished uninstalling reboot your system when prompted USER ENROLLMENT Before you can use any OmniPass features you must first enroll a user into OmniPass M
30. desired identity and then click OK Identities and Password Management On the Manage Passwords interface of the Vault Management tab of the OmniPass Control Center there is a pull down selection box labeled Identity This field lets you choose which identity you are managing pass words for When you select an identity here only those password protected dialogs that are associated with that identity are shown You can perform all the functions explained in Password Management on page 106 CONFIGURING OMNIPASS This section gives an overview of both the Export Import function and the OmniPass Control Center Exporting and Importing Users Using the OmniPass Control Center you can export and import users in and out of OmniPass The export process backs up all remembered sites credentials and any enrolled fingerprints for an OmniPass user All OmniPass data for a user is backed up to a single encrypted database file During the import process the Windows login of the exported user is required Ifthe proper credentials cannot be supplied the user profile will not be imported You should periodically export your user profile and store itin a safe place If anything happens to your system you can import your OmniPass profile to a new system and have all your remem bered settings and fingerprints instantly You don t forget the Windows login credentials when exporting When you examine the importation you are prompte
31. enough to interfere with your operation needs The display needs technical diagnosis contact your support representative The application display uses only a portion of your screen and is surrounded by a dark frame You are running an application that does not support 800 x 600 1024 x 768 pixel resolution display and display compression is enabled When compensation is disabled a clearer but smaller display for applications that do not support 800 x 600 1024 x 768 pixel resolution will result You can fill the screen but have less resolution by changing your compensation setting See the Video Features submenu located within the Advanced menu of the BIOS See BIOS Setup Utility on page 30 You have connected an external monitor and it does not display any information Your BIOS setup is not set to enable your external monitor Try toggling the video destination by pressing Fn and F10 together or check your BIOS setup and enable your external monitor See the Video Features submenu located within the Advanced Menu of the BIOS See BIOS Setup Utility on page 30 Your external monitor is not properly installed Reinstall your device See External Video Port on page 47 Your operating system software is not set up with the correct software driver for that device Check your device and operating system documentation and activate the proper driver You have connected an
32. entering and leaving your note book Tablet PC in electronic form 1 O Port The connector and associated control circuits for data entering and leaving your notebook Tablet PC in elec tronic form IDE Intelligent Drive Electronics A type of control interface for a hard drive which is inside the hard drive unit IEEE 1394 Industry standard that allows you to connect between your notebook Tablet PC and a peripheral device such as a digital camera Also known as Firewire or LINK IEEE802 11a One ofthe wireless LAN standards prescribed by the 802 committee in charge of establishing standards of LAN technology in IEEE Institute of Electrical and Elec tronic Engineers This standard allows communica tions at the maximum speed of 54 Mbps by using a 5 GHz band which can freely be used without radio communication license IEEE802 11b One ofthe wireless LAN standards prescribed by 802 committee in charge of establishing standards of LAN technology in IEEE Institute of Electrical and Elec tronic Engineers It allows communications at the maximum speed of 11 Mbps by a band of 2 4 GHz ISM band which can freely be used without radio communi cation license IEEE802 11 One of the wireless LAN standards prescribed by 802 committee in charge of establishing standards of LAN technology in IEEE Institute of Electrical and Elec tronic Engineers It allows communications at the maximum speed of 54 Mbps by a band o
33. lengthens the power down and power up sequences and resets peripheral devices Getting Started Using Hibernate Mode Hibernate default setting is enabled for Windows XP To enable or disable the Hibernation feature follow these easy steps 1 From the Start menu select Control Panel gt Power Options 2 Select the Hibernate tab and then select the box to enable or disable this feature To use Hibernate mode with your system 1 From the Start menu select Control Panel gt Power Options 2 Select the Power Schemes tab and in the System hibernates boxes select the amount of time you want to elapse until the system goes into hibernation when plugged in and when running on battery power DISPLAY TIMEOUT The Video Timeout is one of the power management parameters This feature saves power by turning off the display if there is no keyboard or pointer activity for the user selected timeout period Any keyboard or pointer activity will cause the display to restart automatically This feature is independent of the Suspend Resume button and can be enabled and disabled in Windows Power Management HARD DISK TIMEOUT The Hard Disk Timeout is another one of the power management parameters This feature saves power by turning off the hard drive if there is no hard drive activity for the user selected timeout period Any attempt to access the hard drive will cause it to restart automatically This feature is independent
34. logged into Windows and OmniPass The capture window will also appear if you have used Ctrl Alt Del to lock a system and the fingerprint device can be used to log back in as stated above If a machine is locked and OmniPass detects a different user logging back in with a fingerprint the first user will be logged out and the second user logged in In Windows XP your login options must be set either for classic login or for fast user switching and logon screen to be enabled to use your fingerprint to log on to Windows To change this go to Control Panel select User Accounts and then click Change the way users log on or off If your Windows screensaver is password protected the fingerprint capture window will now appear next to screensaver password dialog during resume You can authenticate to your screensaver pass word prompt with your enrolled finger Password Management OmniPass provides an interface that lets you manage your passwords To access this GUI double click the OmniPass key in the system tray Click Vault Manage ment you will be prompted to authenticate Once you gain access to Vault Management click Manage Pass words under Vault Settings You will see the Manage Passwords interface with a list of friendly names You can view the credentials stored for any remembered website by highlighting the desired resource under Pass word Protected Dialog and clicking Unmask Values Should a password be reset
35. memory cards allow you to transfer data to and from a variety of different digital devices USB 2 0 Port The USB 2 0 port allow you to connect Universal Serial Bus devices See Universal Serial Bus Ports on page 46 DC Power Jack The DC power jack allows you to plug in the AC adapter or the optional Auto Airline adapter to power your system and charge the internal Lithium ion Battery 11 y Lifebook P Series Notebook Tablet PC External Modem RJ 11 Port Video Port behind cover rt L i en DtTETEGD STE LALA f L LAN RJ 45 Port Anti theft Lock Slot Air Vents Figure 2 7 LifeBook P Series notebook Tablet PC rear panel REAR PANEL COMPONENTS Modem RJ 11 Telephone Port The Modem RJ 11 telephone port is for attaching a telephone line to the internal multinational 56K modem The internal multinational modem is not intended for use with Digital PBX systems Do not connect the internal modem to a Digital PBX as it may cause serious damage to the internal modem or your entire LifeBook P Series notebook Tablet PC Consult your PBX manufacturer s documentation for details Some hotels have Digital PBX systems Be sure to find out BEFORE you connect your modem IN The internal modem is designed to the ITU T V 90 sta
36. network sharing service 1 Click the Start button first and then Control Panel 2 Ifthe Control Panel is in Category view switch to Classic view by clicking Switch to Classic View under Control Panel the left frame If you are already in Classic view Switch to Category View will be displayed 92 3 Double click Network Connections A list of cur rently installed networks will be displayed 4 Right click Wireless Network Connection in the list and then click Properties in the menu dis played The Wireless Network Connection Prop erties window will be displayed 5 If File and Printer Sharing for Microsoft Net works is displayed proceed to step 6 If File and Printer Sharing for Microsoft Networks is not dis played skip to step 7 6 Make sure that the File and Printer Sharing for Microsoft Networks check box is checked and then click the OK button Skip to Setting file sharing function 7 Click Install The Select Network Component Type window will be displayed 8 Click Service then click the Add button The Select Network Service window will be displayed 9 Click File and Printer Sharing for Microsoft Net works and then click the OK button Processing will return to the Wireless Network Connection Properties window and File and Printer Sharing for Microsoft Networks will be added to the list 10 Click the Close button Setting the file sha
37. only applies to networks using static IP addresses Please contact your network administrator for the correct settings 95 y Lifebook P Series Notebook Tablet PC Wireless LAN Glossary GLOSSARY Access point Wireless network device used to bridge wireless and wired network traffic Ad Hoc Mode Ad Hoc Mode refers to a wireless network architecture where wireless network connectivity between multiple computers is established without a central wireless network device typically known as Access Points Connectivity is accomplished using only client devices in a peer to peer fashion For details refer to Ad hoc connection on page 86 CCX Cisco Compatible Extensions Implementation that provides improved wireless data security ensuring certified compatibility with Cisco wireless access points Channel Range of narrow band frequencies used by the WLAN device to transmit data IEEE 802 11b g 11 channels 22 MHz wide channels DHCP Dynamic Host Configuration Protocol A protocol that provides a means to dynamically allocate IP addresses to computers on a local area network DNS Domain Name System A data query service that provides a mechanism with which to translate host names into Internet addresses EAP Extensible Authentication Protocol A protocol implementation that provides a framework to allow easier user authentication IEEE 802 11a Wireless LAN standard that supports a maximum data
38. optional Port Replicator Port Replicator AC adapter is not plugged in Provide power to the Port Replicator LifeBook is not properly seated in the Port Replicator Remove and re dock your notebook Tablet PC Hard Drive Problems You cannot access your hard drive The setup utility is incorrectly set for your internal Primary Master hard drive Revise BIOS settings to set the Primary Master correctly See BIOS Setup Utility on page 30 The wrong drive designator was used by an application when a bootable CD ROM was used to start the system Verify drive designator used by application is in use by the operating system When the operating system is booted from a CD drive designations are automatically adjusted Security is set so your operating system cannot be started without a password Verify your password and security settings Keyboard or Mouse Problems The built in keyboard does not seem to work The notebook Tablet PC has gone into Standby mode Push the Suspend Resume button Your application has locked out your keyboard Try to use your integrated pointing device to restart your system If this fails turn your system off by pressing the suspend resume button for 10 seconds or more and then turn it back on The NumLock key has been toggled on Press the NumLock key to toggle it off 52 Troubleshooting Problem Possible C
39. or an account expire you can remove stored credentials from OmniPass Highlight the desired resource under Password Protected Dialog and click Delete Page You will be prompted to confirm the password deletion The two check boxes in Manage Passwords govern whether OmniPass prompts you to authenticate or directly logs you into the remembered site OmniPass will overwrite an old set of credentials for a website if you attempt to use Remember Password on an already remembered site The exception to the above rule is the resetting of your Windows password If your password is reset in Windows then the next time you login to Windows OmniPass will detect the password change and prompt you to Update or Reconfirm your password with OmniPass Enter your new Windows password in the prompt s and click OK and your OmniPass master password will still be your Windows password OmniPass User Identities Identities allow OmniPass users to have multiple accounts to the same site e g bob biblomail com and boballen biblomail com If OmniPass did not provide you identities you would be limited to remembering one account per site To create and manage identities double click the OmniPass key in the system tray Click Vault Manage ment OmniPass will prompt you to authenticate Once you gain access to Vault Management click Manage Identities under Vault Settings You can only manage the identities of the currently logged in Om
40. rate of 54 Mbps 802 11a devices operate in the 5 GHz lower and middle UNI bands IEEE 802 11b Wireless LAN standard that supports a maximum data rate of 11 Mbps 802 11b devices operate in the 2 4 GHz ISM band 96 IP address The logical 32 bit host address defined by the Internet Protocol that uniquely identifies a computer on a network The IP address is usually expressed in dotted decimal notation LAN Local Area Network A LAN or Local Area Network is a computer network or data communications network which is confined to a limited geographical area MAC address Media Access Control Address A MAC address also called an Ethernet address or IEEE MAC address is the 48 bit address typically written as twelve hexadecimal digits 0 through 9 and A through F or as six hexadecimal numbers separated by periods or colons e g 008000201 2ef 0 80 0 2 20 ef which uniquely identifies a computer that has an Ethernet interface MTU Maximum Transmission Unit The maximum size of data which can be transmitted at one time in networks including the Internet In an envi ronment whose maximum size of data is too large to correctly receive data normal communications can be restored by setting the size of MTU to a smaller value Network key Data that is used for encrypting data in data communi cation The personal computer uses the same network key both for data encryption and decryption therefore it is necessary to s
41. sequence is 1 Click the Start button and then click Turn Off Computer 2 Select the Turn Off option from within the window If you are going to store your notebook Tablet PC for a month or more see the Care and Maintenance section 34 4 User Installable Features 36 LifeBook P Series Notebook Tablet PC Lithium ion Battery Your LifeBook P Series notebook Tablet PC has a Lithium ion battery that provides power for operating your notebook Tablet PC when no external power source is available The battery is durable and long lasting but should not be exposed to extreme tempera tures high voltages chemicals or other hazards The Lithium ion battery operating time may become shorter if it is used under the following conditions When used at temperatures lower than 41 F 5 C or higher than 95 F 35 C Extreme temperatures not only reduce charging efficiency but can also cause battery deterioration The Charging icon on the Status Indicator panel will flash when you try to charge a battery that is outside its operating temperature range See on page 14 When using a high current device such as a modem CD ROM drive or hard drive using the AC adapter will conserve your battery life Do not leave a faulty battery in your sys tem It may damage your AC adapter optional Auto Airline adapter or your notebook Tablet PC itself It may also prevent operation of your notebook Tablet P
42. the left frame 2 Click My Network Places in the Other Places list The window My Network Places will be dis played 3 Click View workgroup computers under Net work Tasks in the left frame 4 Double click the personal computer to which your personal computer is to be connected The folder that was specified in Setting the file sharing func tion on page 92 will be displayed 5 Double click the folder to be accessed Confirming the status of the radio Right click the Intel PRO Wireless icon in the lower right corner of the screen 2 Click Open Intel PROSet for Wireless The Intel PROSet for Wireless window opens 3 Contained within the General tab and the Details section accessed by pressing the Details button you will find the current operating status of the radio When the radio is turned off or the com puter is not yet connected some of the conditions will not be displayed Profile Name The current configuration profile is displayed Network Name SSID Displays the Network Name SSID currently used by the radio IP Address The IP address of the current profile Signal Quality Displays a message stating the current quality of the signal Signal Strength Displays a graphic representation ofthe current signal strength Additionally in the lower section of the display you will see a variety of different measurements related to the WLAN For additional informatio
43. the following 1 Turn on or restart your notebook Tablet PC 2 Press the F2 key once the Fujitsu logo appears on the screen This will open the main menu of the BIOS Setup Utility with the current settings displayed 3 Press the RIGHT ARROW or LEFT ARROW key to scroll through the other setup menus to review or alter the current settings BIOS Guide A guide to your system s BIOS is available online Please visit our service and support website at http www computers us fujitsu com support Once there select LifeBook BIOS Guides from the pull down menu for your notebook Tablet PC series If you are unsure of your system s BIOS number refer to your packing slip BOOT SEQUENCE The procedure for starting up your notebook Tablet PC is termed the Bootup sequence and involves your system s BIOS When your notebook Tablet PC is first turned on the main system memory is empty and it needs to find instructions to start up your notebook 30 If your data security settings require it you may be asked for a password before the BIOS main menu will appear Li BOOTING THE SYSTEM We strongly recommend that you not attach any external devices until you have gone through the initial power on sequence When you turn on your LifeBook notebook Tablet PC for the first time it will display a Fujitsu logo on the screen If you do nothing the system will load the oper ating system and then the Windows Welco
44. the suspension states ROM Read Only Memory A form of memory in which infor mation is stored by physically altering the material Data stored in this way can not be changed by your notebook Tablet PC and does not require power to maintain it SDRAM Synchronous Dynamic Random Access Memory Serial Port A connection to another device through which data is transferred one bit at a time on a single wire with any other wires only for control of the device not for transfer of data Shared key authentication One of the network authentication types for wireless LAN Upon authentication the access point checks whether the same network key is set to the client Ifthe client uses a wrong network key or the network key itself is not set authentication is unsuccessful allowing no communications with the access point SMART Self Monitoring Analysis and Reporting Technology SMART is an emerging technology that provides near term failure predictions for hard drives When SMART is enabled the hard drive monitors pre determined drive attributes that are susceptible to degradation over time If a failure is likely to occur SMART makes a status report available so that the notebook Tablet PC can prompt the user to back up the data on the drive Natu rally not all failures are predictable SMART predict ability is limited to those attributes which the drive can self monitor In those cases where SMART can give advance warning a cons
45. use in the United States and Canada Depending upon the configuration of your system your LifeBook notebook Tablet PC may have either a LAN jack or an IEEE 1394 jack Li INTERNAL LAN RJ 45 JACK The internal LAN RJ 45 jack is used for an internal 10 100 BaseTx Ethernet connection You will need to configure your notebook Tablet PC to work with your particular network Please refer to your network administrator for information on your network configuration To connect the LAN cable follow these easy steps See figure 2 7 on page 12 for location 46 Note that the optional Port Replicator is designed to cover the LAN jack located on the system This design ensures that the LAN jack on the Port Replicator is the only one used when the Port Replicator is installed iJ 1 Align the connector with the jack opening 2 Push the connector into the jack until it is seated 3 Plug the other end of the cable into a LAN outlet DOCKING PORT The docking port is used for the connection of your system to an optional port replicator In order to connect your system to one of these devices follow the instruc tions that came with your port replicator See figure 2 8 on page 13 for location UNIVERSAL SERIAL BUS PORTS The two Universal Serial Bus 2 0 ports USB allow you to connect USB devices such as external floppy disk drives external DVD drives game pads pointing devices keyboards and or speakers
46. washbowl kitchen sink or laundry tub in a wet basement or near a swimming pool Avoid using the modem during an electrical storm There may be a remote risk of electric shock from lightning Do not use the modem to report a gas leak in the vicinity of the leak Use only the power cord and batteries indicated in this manual Do not dispose of batteries in a fire They may explode Check with local codes for possible special disposal instructions To reduce the risk of fire use only No 26 AWG or larger UL Listed or CSA Certified Telecommunication Line Cord SAVE THESE INSTRUCTIONS For Authorized Repair Technicians Only Danger of explosion if Lithium clock bat tery is incorrectly replaced Replace only with the same or equivalent type recom mended by the manufacturer Dispose of used batteries according to the manufac turer s instruction A For continued protection against risk of fire replace only with the same type and rating fuse A System Disposal LAMP S INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL STATE OR FEDERAL LAWS Table of Contents Fujitsu LifeBook P Series Notebook Tablet PC Table of Contents 1 Keyboard Using the Keyboard 2 22220 18 PREFACE Numeric Keypad 2222 222 18 Windows Keys 0 0 000000000 18 Preface Cursor KEYS ccs ee asus rca 18 About This Guide
47. your Compact Flash Card manual for specific instructions on removing your card Some Compact Flash Cards may require your system to be in Suspend Mode or Off while removing them If the dialog box states that the device cannot be removed you must save all of your open files close any open applica tions and shut down your notebook Tablet PC 2 Push the eject button in until it is flush with the notebook Tablet PC This will push the Compact Flash Card slightly out of the slot allowing you to remove the card 43 y Lifebook P Series Notebook Tablet PC USB Ports Port Replicator Release Latch Docking Port DC Power Jack LAN RJ 45 Jack External Monitor Port Figure 4 8 Port Replicator rear panel Port Replicator An optional Port Replicator is available from Fujitsu to support your LifeBook P Series notebook Tablet PC The Port Replicator extends the functionality of your system by providing ports to connect USB devices an external monitor external speaker or a LAN device The Port Replicator connects to the bottom of your note book Tablet PC See Device Ports on page 46 PORT REPLICATOR COMPONENTS Following is a description of the Port Replicator components Figure 4 8 DC Power Jack The DC power jack allows you to plug in the AC adapter to power your notebook Tablet PC and charge the internal Lithium ion battery USB 2 0 Ports Qty 2 Universal Serial Bus USB 2
48. your LifeBook notebook Tablet PC It is used to control the movement of the cursor to select items on your display panel The Quick Point is composed of a cursor control at the center of the keyboard and three buttons on the palm rest of your computer The cursor control works the same way a mouse ball does and moves the cursor around the display It only requires light pressure with the tip of your finger and the more pressure you use the faster the cursor will move The left button functions the same as a left mouse button while the right button has the same function as a right mouse button When used with the cursor control the middle button allows you to scroll up and down a screen The actual functionality of the buttons may vary depending on the application that is being used Figure 2 19 CLICKING Clicking means pushing and releasing a button To left click move the cursor to the item you wish to select press the left button once and then immediately release it To right click move the cursor to the item you wish to select press the bottom button once and then imme diately release it Figure 2 19 A Figure 2 19 Clicking DOUBLE CLICKING Double clicking means pushing and releasing the left button twice in rapid succession This procedure does not function with the right button To double click move the cursor to the item you wish to select press and release the left button twice Figure 2 20 Za Figure 2 20
49. A Connect an external microphone The internal microphone is disabled when you plug in an external microphone Fingerprint Sensor a Use the fingerprint sensor to log onto the system using your fingerprint as the password Headphone Jack Connect stereo headphones or powered external speakers The internal speaker is disabled when you plug in external headphones or powered speakers Modem Connect a telephone line to the internal modem using a standard RJ 11 telephone plug Port Replicator Connect the port replicator or other approved docking device Refer to documentation accompanying the dock for more information Security lock slot The security slot allows you to secure the notebook Tablet PC using notebook locking devices Suspend Resume The Suspend Resume button allows you to suspend system activity without button powering off resume from suspend mode and power on the system when it has been shut down from Windows Local Area The LAN RJ 45 jack is used to connect the internal 10 100 Base T Tx Ethernet Network LAN to a Local Area Network LAN in your office or home or broadband devices such as a cable modem DSL or satellite Internet Battery Release Latch The battery release latch allows you to remove the battery from your system for storage or replacement Wireless LAN Bluetooth On Off Switch ea cPpFE D The wireless LAN switch allows you to turn power to t
50. C Card CM EEE TEL TI E a 67 PEMOVING ls ER SER ELSE 43 A re ek Race ee 10 Pen naeh 11 Port Replicator 2 cios 222 18H Res ni 44 afta hnoo ein 2 ea aa Cada ae 44 det ching aan een 44 problems coopera essen Chew ee es 52 Port Replicator Connector oooooommmomom 8 13 Power AG adapter io ne inte 29 Auto Airline adapter oooooooconconcomo 29 failure didas 54 INdicator an ne 14 MANASEMENE psss beds gains a peta 32 len ahnen eo eae Ota ED ba ae 34 POWERON ee ii 30 problems iria EREA ot 55 SOUTCES 4 22855 Med ee eed eaten Mer ee ties ee a 29 Power Management 00 e eee cues 32 33 Power On Self Test 0 0000 c cece eee aee 30 58 Q Quick Point CUGKAN G33 0 slack ca ee nee ee 22 control adjustment 00 00008 23 double clicking 0 0 e eee eee 22 AA dea we onea Siena nie 22 R Registration daa 31 Re Installing Individual Drivers and Applications 60 Removing a Memory Stick ooooooomoooo 41 Restarting the system 0 00 eee eee eee 33 Restoring the Factory Image oooooooomoo 60 Restoring Your Pre installed Software 60 Rida Vedic tad ted 46 RJAD ON OVA Bee Ohne Dee 8 46 Rotation Hinges un ences nn 9 5 ScrEk Indicator cti a 15 SD Card removing isc Vows ey Pee Vers oy See ee 41 SD Gard SIR ads 11 SD Cards FEMOVING A 41 SDRAM dei ARE I ce es 13 39 Secure Digital Card FEMOVING re Bea ee ae 41 Securit
51. C Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installa tion This equipment generates uses and can radiate radio frequency energy If not installed and used in accordance with the instructions it may cause harmful interference to radio communications However there is no guarantee that interfer ence will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try and correct the interference by one or more of the following measures 1 Reorient or relocate the receiving antenna 2 Increase the distance between the equipment and the receiver 3 Connect the equipment to an outlet on a circuit different from the one the receiver is connected to 4 Consult the dealer or an experienced radio TV technician for help FCC Radio Frequency Exposure statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with a minimum distance of 20 centimeters between the Wireless LAN Bluetooth antennas and your body The WLAN antenna is located on the left and right ends of the top
52. C by draining all available cur rent into the bad battery Under federal state or local law it may be illegal to dispose of batteries by putting them in the trash Please take care of our environment and dispose of batteries properly Check with your local government authority for details regarding recycling or disposing of old batteries If you cannot find this infor mation elsewhere contact your support representative at 1 800 8Fujitsu A Actual battery life will vary based on screen brightness applications features power management settings battery condition and other customer preferences CD ROM drive or hard drive usage may also have a significant impact on battery life The battery charging capacity is reduced as the battery ages If your battery is running low quickly you should replace it with a new one Li RECHARGING THE BATTERY If you want to know the condition of the Lithium ion battery check the Battery Level indicator located on the Status Indicator panel The indicator changes as the battery level changes User Installable Features The Lithium ion battery is recharged internally using the AC adapter or Auto Airline adapter To recharge the battery make sure the battery that needs to be charged is installed in your notebook Tablet PC and connect the AC or Auto Airline adapter Li There is no memory effect on the Lithium ion battery therefore you do not need to discharge the battery
53. Calcu lator and the Application B button launches WordPad Windows XP Professional or MS Journal Windows XP Tablet PC Edition To launch different applications or cause the Applica tion A or B buttons to perform a specific action Windows XP Professional 1 Double click on the Tablet Button Settings icon in the Control Panel 2 Select the button you would like to change from the list 3 Click Change and open the drop down list in the Action field 4 Select the action you would like the button to perform If you want to launch a program click on Launch an Application then browse to the location of the program 5 Click OK then click OK again The buttons will now perform the actions you have assigned to them Windows XP Tablet PC Edition 1 Double click on the Tablet and Pen Settings icon in the Control Panel Select the Tablet Buttons tab Select the button you would like to change from the list 3 Click Change and open the drop down list in the Action field 4 Select the action you would like the button to perform If you want to launch a program click on Launch an Application then browse to the location of the program 5 Click OK then click OK again The buttons will now perform the actions you have assigned to them 21 SS P Series Notebook Tablet PC Cursor Control Figure 2 18 Touchpad pointing device Quick Point Pointing Device Touch Screen The Quick Point is built into
54. In Analog RGB Mini D SUB 15 pin connector for external VGA monitor e Docking connector Interfaces on Optional Port Replicator e DC Power LAN RJ 45 15 pin D SUB connector for external VGA monitor e USB2 0x2 e Docking Port CF Card Slot Dedicated slot for Compact Flash Card Type Il SD Slot Dedicated slot for SD Card User Interface support e Keyboard Pitch 19 mm Stroke 3 mm e Quick Point pointing device with scroll button e Passive digitizer with pen input e On screen keyboard 71 y LifeBook P Series Notebook Tablet PC LifeBook P Series notebook Tablet PC Specifications LifeBook P Series notebook Tablet PC Specifications Audio Realtek ALC203 e Internal mono microphone e Mono speaker e Mono microphone and stereo headphone jacks 26 adjustable audio levels Agency Approval Specifications FCC 15E 15 407 ETSI EN 300 328 V1 4 1 2003 User Controls e Programmable Application Buttons each with primary and secondary functions default applications Calculator and WordPad Trusted Platform Module TPM support on some models Suspend Resume button Status Indicators LCDs e Power Battery charging e Battery level Hard disk drive e Caps Lock e Num Lock Scroll Lock Emissions e ETSI EN 301 489 01 V1 4 1 e ETSI EN 301 893 V1 2 3 2003 Immunity EN55024 1998 A1 Safety e UL and cUL Liste
55. OMPONENTS Following is a brief description of your notebook Tablet PC s left side components Figure 2 5 USB 2 0 Port The USB 2 0 port allow you to connect Universal Serial Bus devices See Universal Serial Bus Ports on page 46 Compact Flash Card Slot The Compact Flash CF Card Slot allows you to insert a CF Card The CF Card Eject Button is used when ejecting a CF Card from the slot See Inserting Compact Flash Cards on page 42 Microphone Jack The microphone jack allows you to connect an external mono microphone See Microphone Jack on page 46 Headphone Jack The headphone jack allows you to connect stereo head phones or powered external speakers See Headphone Jack on page 46 10 gt Pen Pen Holder Getting to Know Your LifeBook Secure Digital SD Card Slot Z7 TO WLAN Bluetooth On Off Switch 7 USB 2 0 Port DC Power Jack Figure 2 6 LifeBook P Series notebook Tablet PC right side panel RIGHT SIDE PANEL COMPONENTS Following is a brief description of your notebook Tablet PC s right side components Pen Pen Holder The pen is used as the interface with the digitizer display WLAN Bluetooth On Off Switch The wireless LAN Bluetooth On Off Switch is used to power off the wireless antenna when not in use SD Card The Secure Digital SD card slot allows you to insert a flash memory card for data storage Flash
56. Obtain an IP address automatically and Obtain DNS server address automatically If your network uses static IP addresses consult with your network administrator for the correct IP address settings Click the OK button Processing will return to the Wireless Network Connection Properties window Click the OK button 10 Close the Network Connection window Following this operation confirm the names of the computer and the workgroup as follows Confirming the computer and work group names To modify the computer name and or the work group name you need to be logged Perform the Setting TCP IP and Confirming the computer and work group names operations required for network connection Setting TCP IP To change the setting of the IP address you need to be logged in from Windows as an administrator Li 1 Click the Start button first and then Control Panel GJ 1 Click the Start button then Control Panel in from Windows as an administrator 2 Ifthe Control Panel is in Category view switch to Classic view by clicking Switch to Classic View under Control Panel the left frame If you are already in Classic view Switch to Category View will be displayed 3 Double click the System icon The System Prop erties window will be displayed 4 Click the Computer Name tab 91 SS P Series Notebook Tablet PC 5 Confirm the settin
57. Press the battery release latches to open the compartment 5 Remove the battery from the compartment 6 Slide the new battery into the compartment 7 Close the compartment and the battery release latches will click into place 8 Plugin the AC adapter and turn the power on 38 y fon Es N el o oe J O eesse e Figure 4 1 Removing the Battery Hot swapping Batteries To hot swap batteries in your battery compartment follow these easy steps Figure 4 1 1 Close any open files and put your system into Standby mode 2 Connect an AC adapter or Auto Airline power adapter to provide power to the system 3 Lift the display enough to pull the display latch from the slot 4 Press the battery release latches inward to open the compartment 5 Remove the battery from the compartment 6 Slide the new battery into the compartment 7 Close the compartment and the battery release latches will click into place 8 Press the Suspend Resume button to return your system to normal operation If the Lithium ion battery connector is not fully seated you may not be able to use your notebook Tablet PC or charge your battery Li Memory Upgrade Module Your Fujitsu LifeBook P Series notebook Tablet PC comes with a minimum of 256 MB of high speed Double Data Rate Synchronous Dynamic RAM 2 DDR2 SDRAM 400 MHz factory installed To increase your system s
58. USB 2 0 is down ward compatible with USB 1 1 devices so older USB devices will work with these ports USB 2 0 is a much faster design running forty times faster than USB 1 1 In order to connect a USB device follow these easy steps See figure 2 7 on page 12 for location 1 Align the connector with the port opening 2 Push the connector into the port until it is seated MICROPHONE JACK The microphone jack allows you to connect an external mono microphone Your microphone must be equipped with a 1 8 3 5 mm mono mini plug in order to fit into the microphone jack of your notebook Tablet PC In order to connect a microphone follow these easy steps See figure 2 4 on page 9 for location 1 Align the connector with the port opening 2 Push the connector into the port until it is seated HEADPHONE JACK The headphone jack allows you to connect headphones or powered external speakers to your notebook Tablet PC Your headphones or speakers must be equipped with a 1 8 3 5 mm stereo mini plug In order to connect headphones or speakers follow these easy steps See figure 2 4 on page 9 for location 1 Align the connector with the port opening 2 Push the connector into the port until it is seated If you plug headphones into the headphone jack the built in stereo speakers will be disabled EXTERNAL VIDEO PORT The external video port allows you to connect an external monitor or LCD projector In o
59. USING OMNIPASS You are now ready to begin using OmniPass Used regularly OmniPass will streamline your authentication procedures Password Replacement You will often use the password replacement function When you go to a restricted access website e g your bank your web based email online auction or payment sites you are always prompted to enter your login credentials OmniPass can detect these prompts and you can teach OmniPass your login credentials The next time you go to that website you can authenticate with your fingerprint to gain access OmniPass Authentication Toolbar After installing OmniPass and restarting you will notice a dialog you have not seen before at Windows Logon This is the OmniPass Authentication Toolbar and it is displayed whenever the OmniPass authentication system is invoked The OmniPass authentication system may be invoked frequently during Windows Logon during OmniPass Logon when unlocking your workstation when resuming from standby or hibernate when unlocking a password enabled screensaver during pass word replacement for remembered site or application logins and more When you see this toolbar OmniPass is prompting you to authenticate The Logon Authentication window indicates what OmniPass restricted function you are attempting The icons in the lower left fingerprint and key show what authentication methods are available to you Selected authentication methods are highlighted while
60. Windows XP Tablet PC Edition Double click the Tablet and Pen Settings icon and select the Settings tab 3 Windows XP Professional Press the Calibrate Now button Windows XP Tablet PC Edition Click the Calibrate button 3 Adjust the display of your notebook Tablet PC to a comfortable angle and find the symbol in the upper left corner of the display 24 Do not use excessive force when tapping on the screen during calibration Use of excessive force could result in damage to the LCD and or touch panel A screen with your fingers doing so could When using the stylus to calibrate the i screen be sure to avoid touching the result in faulty calibration 4 Using the stylus firmly touch the screen directly on the symbol Lift the stylus from the screen and the target will move to a different location on the screen 5 Repeat step 4 until you have selected all of the symbols 6 Once you have selected all the symbols press the Update button Windows XP Professional or the OK button Windows XP Tablet PC Edition 7 Touch the stylus to various points on the screen to verify that the screen is correctly calibrated If you are not satisfied with the screen s calibration press the Calibrate Now or Calibrate button to begin again Volume Control Your Fujitsu LifeBook notebook Tablet PC has multiple volume controls which interact with each other
61. addresses assigned to a computer with the name Even for those computers whose IP addresses are unknown if their names are known it is possible to communicate with them DOS Disk Operating System MS DOS is a Microsoft Disk Operating System Driver A computer program which converts application and operating system commands to external devices into the 78 exact form required by a specific brand and model of device in order to produce the desired results from that particular equipment ECP Extended Capability Port A set of standards for high speed data communication and interconnection between electronic devices Encryption Key Network Key Key information used to encode data for data transfer This device uses the same encryption key to encode and decode the data and the identical encryption key is required between the sender and receiver ESD Electro Static Discharge The sudden discharge of elec tricity from a static charge which has built up slowly Example the shock you get from a doorknob on a dry day or the sparks you get from brushing hair on a dry day Extended Memory All memory more than the 640KB recognized by MS DOS as system memory FCC Federal Communication Commission Floppy Disk A spinning platter of magnetic data storage media which is highly flexible GB Gigabyte Hard drive A spinning platter of magnetic data storage media where the platter is very stiff 1 0 Input Output Data
62. arging indicator shows that your notebook Tablet PC is operating from the AC adapter or an auto airline adapter This icon has two different states that can tell you the battery charge status Green This means that a power adapter is currently in use and the battery is not charging Amber This means that a power adapter is currently in use and the battery is charging I BATTERY LEVEL INDICATOR The Battery Level indicators shows whether the Lithium ion battery is installed and charging and how much charge is available within the batteries Green The battery is installed and fully charged Amber The battery is installed and is approximately half charged Red The battery charge is low and it should be charged with an adapter or replaced with a charged battery Batteries subjected to shocks vibration or extreme temperatures can be permanently damaged If there is no battery activity and the power adapters are not connected the Battery Level indicators will also be off HARD DRIVE ACCESS INDICATOR The Hard Drive Access indicator lights green when your internal hard drive is being accessed O NUMLK INDICATOR The NumLk indicator shows that the integral keyboard is set in ten key numeric keypad mode O CAPSLOCK INDICATOR The CapsLock indicator shows that your keyboard is set to type in all capital letters O SCRLK INDICATOR The ScrLk indicator shows that your scroll loc
63. art Video Problems The built in display is blank when you turn on your note The angle of the display and the brightness settings are not Move the display and the brightness control until you have adequate visibility turned on with a series of beeps and your built in display is blank detected a failure which does not allow the display to operate book Tablet PC adequate for your lighting conditions The optional Port Replicator is Pressing F10 while holding down the Fn key allows attached an external monitor is you to change your selection of where to send your plugged in and the system is set display video Each time you press the combination of for an external monitor only keys you will step to the next choice The choices in order are built in display only external monitor only both built in display and external monitor The power management Press any button the keyboard or move the mouse to timeouts may be set for very restore operation If that fails push the Suspend short intervals and you failed to Resume button The display may be shut off by notice the display come on and Standby mode Auto Suspend or Video Timeout go off again The notebook Tablet PC Power On Self Test POST has Contact your support representative Your system display won t turn on when the system is turned on or when the system has resumed The system may be password protected Check the status indi
64. aster Password Concept Computer resources are often protected with passwords Whether you are logging into your computer accessing your email e banking paying bills online or accessing network resources you often have to supply credentials 104 to gain access This can result in dozens of sets of creden tials that you have to remember During OmniPass user enrollment a master password is created for the enrolled user This master password replaces all other passwords for sites you register with OmniPass Example A user John installs OmniPass on his system his home computer and enrolls an OmniPass user with username John_01 and password freq14 He then goes to his webmail site to log onto his account He inputs his webmail credentials as usual username John_02 and password tablet but instead of clicking Submit he directs OmniPass to Remember Password Now whenever he returns to that site OmniPass will prompt him to supply access credentials John enters his OmniPass user credentials John_01 and freq14 in the OmniPass authentication prompt and he is allowed into his webmail account He can do this with as many websites or password protected resources he likes and he will gain access to all those sites with his OmniPass user credentials John_01 and freq14 This is assuming he is accessing those sites with the system onto which he enrolled his OmniPass user
65. at giyenireasonable care The drive rotates the compact disk at a very high Always store your discs in their case when not in use speed Do not carry it around or subject it to shock or vibration with the power on Avoid using or storing the drive where it will be exposed to extreme temperatures Avoid using or storing the drive where it is damp or Always handle discs by the edges and avoid touching the surface Avoid storing any discs in extreme temperatures dusty Do not bend discs or set heavy objects on them A ae i oe Use of a commercially available lens cleaner kit is Do not spill liquids on discs recommended to maintain the drive lens Avoid using or storing the drive near magnets or devices that generate strong magnetic fields Avoid using or storing the drive where it will be subjected to shock or vibration Do not disassemble or dismantle the optical drive Do not scratch discs Do not put a label on discs Do not get dust on discs Never write on the label surface with a ballpoint pen or pencil Always use a felt pen CF CARDS Ifa disc is subjected to a sudden change in tempera Caring for your CF Cards ture cold to warm condensation may form on the sur CF Cards are durable but you must treat them with face Wipe the moisture off with a clean soft lint free care The documentation supplied with your CF Cards cloth and let it dry at room temperature DO NOT use provides specific information for
66. ation carefully gt The warning icon warns you about possible hazards that can occur to you your system or your files Please read all warning information carefully A FUJITSU CONTACT INFORMATION Service and Support You can contact Fujitsu Computer Systems Service and Support the following ways Toll free 1 800 8Fujitsu 1 800 838 5487 Fax 1 408 764 2724 E mail 8fujitsu us fujitsu com Website http www computers us fujitsu com support Before you place the call you should have the following information ready so that the customer support representative can provide you with the fastest possible solution Product name Product configuration number Product serial number Purchase date Conditions under which the problem occurred Any error messages that have occurred Type of device connected if any Fujitsu Online You can go directly to the online Fujitsu Product catalog for your notebook Tablet PC Go to Start gt Fujitsu Weblinks gt LifeBook Accessories You can also reach Fujitsu Service and Support online by going to Start gt Fujitsu Weblinks gt Fujitsu Service and Support Li WARRANTY Your LifeBook P Series notebook Tablet PC is backed by an International Limited Warranty and includes toll free technical support Check the service kit that came with your system for warranty terms and conditions You must have an active internet connect
67. ations doivent tre effectu es par un service de maintenance agr au Canada Toute r paration ou modification qui mest pas express ment approuv e par Fujitsu ou toute d faillance de quipement peut entra ner la compagnie de t l communications a exiger que l utilisateur d con necte P quipement de la ligne t l phonique AVIS Lindice d quivalence de la sonnerie IES du present mat riel est de 0 1B LIES assign a chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent tre raccord s a une interface telephonique La terminaison d une interface peut consister en une combinaison quelconque de dispositifs a la seule condition que la somme d indices d quiva lence de la sonnerie de tous les dispositifs n excede pas 5 Pour assurer la s curit les utilisateurs doivent v rifier que la prise de terre du ser vice d lectricit les lignes t lphoniques et les conduites d eau m talliques sont con nect es ensemble Les utilisateurs NE doivent PAS tenter d tablir ces connex ions eux m mes mais doivent contacter les services d inspection d installations lectriques appropri s ou un lectricien Ceci peut tre particulierement important en r gions rurales Glossary 76 LifeBook P Series Notebook Tablet PC Glossary AC Adapter A device which converts the AC voltage from a wall outlet to the DC voltage needed to power your note book Tablet PC ACPI
68. attery failure Verify the condition of the battery using the Status Indicator panel and replace or remove any battery that is shorted See Status Indicators on page 14 Your power adapter has failed or lost its power source Make sure the adapter is plugged in and the outlet has power Your notebook Tablet PC will not work on battery alone The battery is dead Replace the battery with a charged one or install a Power adapter 54 Troubleshooting Problem Possible Cause Possible Solutions Your notebook TabletPC will No battery is installed Install a charged battery not work on battery alone I The battery is improperly continued installed Verify that the battery is properly connected by re installing them Your battery is faulty Verify the battery condition using the Status Indicator panel and replace or remove any battery that is shorted See Status Indicators on page 14 The battery seems to discharge too quickly You are running an application Use a power adapter for this application when at all that uses a great deal of power possible due to frequent hard drive or CD ROM access or use ofa modem or LAN PC card be disabled The power savings features may Check the power management and or setup utility settings in the Power Savings menu and adjust according to your operating needs The brightness is turned all the Turn
69. ause Possible Solutions You have installed an external keyboard or mouse and it does not seem to work Your external device is not prop erly installed Re install your device See Device Ports on page 46 Your operating system software is not set up with the correct driver for that device Check your device and operating system docu menta tion and activate the proper driver You have connected an external keyboard or amouse and it seems to be locking up the system Your operating system software is not set up with the correct driver for that device Check your device and operating system documentation and activate the proper driver Your system has crashed Try to restart your system If that fails turn off the power by pressing the suspend resume button for at least 10 seconds and then power back on Pen Input Problems Cursor is not tracking the pen The system may be uncalibrated If the cursor on the screen appears to be misaligned with the pen or is not accurately tracking the pen calibrate the pen See Calibrating the Touch Screen on page 24 Ink crossword application doesn t work properly System has incorrect resolution This LifeBook model uses 1024x600 resolution but the application s minimum resolution is 1024x768 The Ink Crossword application found in Tablet PC Experience Pack cannot be used with this model Memory Problems Power On s
70. ave been made via the FDU About Fujitsu Driver Update Displays the FDU version number and copyright information Fujitsu Driver Update Readme Displays the FDU readme 61 62 LifeBook P Series Notebook Tablet PC 6 Care and Maintenance 64 LifeBook P Series Notebook Tablet PC Care and Maintenance If you use your LifeBook P Series notebook Tablet PC carefully you will increase its life and reliability This section provides some tips for looking after the system and its devices A LIFEBOOK P SERIES NOTEBOOK TABLET PC Caring for your LifeBook Your notebook Tablet PC is a durable but sensitive electronic device Treat it with care IN Make a habit of transporting it in a suitable carrying case Electrical equipment may be hazardous if misused Operations of this product or similar products must always be supervised by an adult Do not allow children access to the interior of any electrical products and do not permit them to handle any cables Do not use excessive force when tapping or writing on the screen with the stylus or your finger Use of excessive force could result in damage to the LCD and or Touch Screen To protect your notebook Tablet PC from damage and to optimize system performance be sure to keep all air all vents unobstructed clean and clear of debris This may require periodic cleaning depending upon the environment in which the system is used
71. ble modes 12 Click OK 13 Ifthe profile you just created does not activate immediately click the Profile Management tab highlight the desired Profile and click Activate 14 Click Close if you want to close the Atheros Cli ent Utility CONNECTION TO THE NETWORK This section explains connection to the network If there is an administrator of the network contact the network administrator for data settings Setting the network 9 Wireless LAN User s Guide If the Control Panel is in Category view switch to Classic view by clicking Switch to Classic View under Control Panel the left frame If you are already in Classic view Switch to Category View will be displayed Double click Network Connections A list of cur rently installed networks will be displayed Right click Wireless Network Connection in the list and then click Properties in the menu dis played The Wireless Network Connection Prop erties window will be displayed Click the General tab if it is not already selected Click Internet Protocol TCP IP and then click Properties The Internet Protocol TCP IP Properties window will be displayed Set the IP address as follows For ad hoc connection Select Use the following IP address and then enter data for IP address and Subnet mask See page 98 for IP address setting For access point infrastructure connection If your network uses DHCP select
72. blet PC during the Power On Self Test POST or it will cause an error message to be displayed when you turn your system on the next time See Power On Self Test Messages on page 58 iJ Tablet PC This information is in the BIOS program Each time you power up or restart your system it goes through a boot sequence which displays a Fujitsu logo until your operating system is loaded During booting your system is performing a standard boot sequence including a Power On Self Test POST When the boot sequence is completed without a failure and without a request for the BIOS Setup Utility the system displays the operating system s opening screen The boot sequence is executed when You turn on the power to your notebook Tablet PC You restart your notebook Tablet PC from the Windows Shut Down dialog box The software initiates a system restart e g when you install a new application BIOS SETUP UTILITY The BIOS Setup Utility is a program that sets up the operating environment for your notebook Tablet PC Your BIOS is set at the factory for normal operating conditions therefore there is no need to set or change the BIOS environment to operate your system The BIOS Setup Utility configures Device control feature parameters such as changing V O addresses and boot devices System Data Security feature parameters such as passwords Entering the BIOS Setup Utility To enter the BIOS Setup Utility do
73. book Tablet PC 51 SS P Series Notebook Tablet PC TROUBLESHOOTING TABLE Problem Page Problem Page Audio Problems oooooomcocoommm oo page 52 Modem Problems ooooococommcmco mm page 53 Docking Problems o ooooooocomomm page 52 USB Device Problems ooooooooooo o page 53 Hard Drive Problems ooooooooomo page 52 Power Failures ese cece eee eee eee page 54 Keyboard or Mouse Problems page 52 Shutdown and Startup Problems page 55 Pen Input Problems ooooooommmoo page 53 Video Problems 2 eee seen ee page 56 Memory Problems 00055 page 53 Miscellaneous Problems page 57 Problem Possible Cause Possible Solutions Audio Problems There is no sound coming from the built in speakers The software volume control is set too low Adjust the sound volume control settings in your software operating system and applications Headphones are plugged into your notebook Tablet PC Plugging in headphones disables the built in speakers remove the headphones Software driver is not configured correctly Refer to your application and operating system documentation for help Sound could have been muted with function keys Press F3 while holding the Fn key to toggle the sound on and off Port Replicator Problems System does not turn on when installed in
74. cannot locate the address it displays This is a potentially data destroying failure Contact your support representative Parity Check 2 nnnn Parity error found in the I O bus BIOS attempts to locate the address and display it on the screen If it cannot locate the address it displays This is a potentially data destroying failure Contact your support representative Press lt F1 gt to resume lt F2 gt to SETUP Displayed after any recoverable error message Press the F1 key to continue the boot process or the F2 key to enter Setup and change any settings Previous boot incomplete Default configuration used Previous Power On Self Test did not complete success fully The Power On Self Test will load default values and offer to run Setup If the previous failure was caused by incorrect values and they are not corrected the next boot will likely fail also If using the default settings does not allow you to complete a successful boot sequence you should turn off the power and contact your support representative Real time clock error Real time clock fails BIOS test May require board repair Contact your support representative Shadow RAM Failed at offset nnnn Shadow RAM failed at offset nnnn of the 64k block at which the error was detected You are risking data corruption if you continue Contact your support repre sentative nnnn Shadow RAM Passed Where nnnn is the amount of shado
75. cator panel to verify that the Secu rity icon is blinking If it is blinking enter your pass word The display goes blank by itself after you have been using it The notebook Tablet PC has gone into Video Timeout Standby Mode or Hibernate Mode because you have not used it for a period of time Press a button on the keyboard or move the mouse to restore operation If that fails push the Suspend Resume button Check your power management settings or close your applications and go to the Power Savings menu of the setup utility to adjust the timeout values to better suit your operation needs See BIOS Setup Utility on page 30 The power management time outs may be set for very short intervals and you failed to notice the display come on and go off again Press any button on the keyboard or move the mouse to restore operation If that fails push the Suspend Resume button The display may be shut off by Standby Mode Auto Suspend or Video Timeout The display does not close A foreign object such as a paper clip is stuck between the display and the keyboard Remove all foreign objects from the keyboard 56 Troubleshooting Problem Possible Cause Possible Solutions The display has bright or dark spots If the spots are very tiny and few in number this is normal for a large LCD display This is normal do nothing If the spots are numerous or large
76. ce in a storage media such as a partition of a hard drive a file or direc tory of floppy diskette or hard drive XGA Extended VGA 82 Appendix A Integrated Wireless LAN User s Guide Optional Device 84 LifeBook P Series Notebook Tablet PC C FCC REGULATORY INFORMATION Please note the following regulatory information related to the wireless LAN device Regulatory Notes and Statements Wireless LAN Health and Authorization for use Radio frequency electromagnetic energy is emitted from Wire less LAN devices The energy levels of these emissions however are far much less than the electromagnetic energy emissions from wireless devices such as mobile phones Wireless LAN devices are safe for use by consumers because they operate within the guidelines found in radio frequency safety standards and recommendations The use of Wireless LAN devices may be restricted in some situations or environments such as On board an airplane or In an explosive environment or a In situations where the interference risk to other devices or services is perceived or identified as harmful In cases in which the policy regarding use of Wireless LAN devices in specific environments is not clear e g airports hospitals chemical oil gas industrial plants private buildings obtain authorization to use these devices prior to operating the equipment Regulatory Information Disclaimers Installation and use of this Wire
77. con in the system tray and select Open Atheros Client Utility from the menu 3 From the Current Status page click the Profile Management tab 4 If this is your first time using this utility highlight the profile Default and Click the Modify but ton otherwise Click the New button The Gen eral Settings dialog displays 90 5 From the General page enter a profile name in the Profile Name field 6 Enter the network SSID in the SSID1 field If you wish to create a profile that can connect to up to 3 different wireless networks SSID s can be entered in the SSID2 and SSID3 fields as well 7 Click the Security tab 8 The Security tab allows for the configuration of the Security modes listed in the table below Please select the radio button of the desired security mode If these settings are not known to you please consult with your network administrator for the correct settings Field Name Description WPA Enables the use of Wi Fi Protected Access Choosing WPA opens the WPA EAP drop down menu Options include TLS and PEAP If these settings are not known to you please consult with your network administrator for the correct settings WPA PSK Enables WPA Pre Shared Key Click on the Configure button to enter the WPA Passphrase If these settings are not known to you please consult with your network administrator for the correct settings 802 1x Enables 802 1x security If these
78. creen or Info menu of BIOS setup utility information does not show the correct amount of installed memory Your memory upgrade module is not properly installed Turn off your system Remove and re install your memory upgrade module See Memory Upgrade Module on page 39 You have a memory failure Check for Power On Self Test POST messages See Power On Self Test Messages on page 58 Modem Problems Messages about modem operation Messages about modem operation are generated by whichever modem application is in use See your application software documentation for addi tional information Modem does not appear to work Modem may not have been initialized Verify that the modem has been initialized by the oper ating system TO do so right click on My Computer and select the Hardware tab Click Device Manager and click on the symbol that appears next to Modems Verify that your device is listed as installed USB Device Problems You have installed a USB device but your notebook Tablet PC does not recognize the device or the device does not seem to work properly The device is not properly installed Remove and re install the device See Device Ports on page 46 The device may have been installed while an application was running so your system is not aware of its installation Close the application and restart your notebook Tablet PC
79. cte toutes les exigence du R glement sur le mat rial brouilleur du Canada Notice to Users of the Canadian Telephone Network NOTICE This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications This is confirmed by the registration number The abbreviation IC before the registration number 4061A 8687 signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met It does not imply that Industry Canada approved the equipment Before connecting this equipment to a telephone line the user should ensure that it is permissible to connect this equipment to the local telecommunication facilities The user should be aware that compliance with the certifica tion standards does not prevent service degradation in some situations Repairs to telecommunication equipment should be made by a Canadian authorized maintenance facility Any repairs or alterations not expressly approved by Fujitsu or any equipment failures may give the telecom munication company cause to request the user to disconnect the equipment from the telephone line NOTICE The Ringer Equivalence Number REN for this terminal equipment is 0 1B The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface The termination on an interface may consist of any combination of d
80. d UL 60950 e FCC Part 68 Telecom e IC CS 03 Additional Specifications Operating e Microsoft Windows XP Pro Systems e Microsoft Windows XP Tablet PC Edition Power Specifications Main Battery e 3 cell e Removable Lithium ion e 10 8 V 02600 mAh max 28 WHr e Recharge Time Approximately 2 5 hours Optional Battery e 6 cell e Removable Lithium ion e 10 8V 5200 mAh max 56 0 WHr Recharge Time Approximately 4 5 hours AC Adapter Autosensing 100 240V supplying 16 VDC with a minimum current of 2 5A Environmental Specifications Temperature Operating 41 to 95 F 5 to 35 C Non operating 5 to 140 F 15 to 60 C Humidity Operating 20 to 85 non condensing Non operating 8 to 85 non condensing 72 Regulatory Information Changes or modifications not expressiy approved by Fujitsu could void this user s authority to operate the equipment FCC NOTICES Notice to Users of Radios and Television These limits are designed to provide reasonable protec tion against harmful interference in a residential installa tion This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a partic ular installation Ifthis equip
81. d for authentication The credentials that will allow a user profile to be imported are the Windows login credentials of the exported user They are the credentials that had to be submitted when the user profile was exported You will need User Name Password and Domain Li 107 SS P Series Notebook Tablet PC Exporting an OmniPass User Profile To export a user open the OmniPass Control Center and click Import Export User under Manage Users Click Exports an OmniPass user profile OmniPass will prompt you to authenticate Upon successfully authenti cation you must name the OmniPass user profile and decide where to save it An opi file is generated and you should store a copy of it in a safe place This opi file contains all your user specific OmniPass data and it is both encrypted and password protected This user profile does NOT contain any of your encrypted data files Importing an OmniPass User Profile Li To import an OmniPass user open the OmniPass Control Center and click Import Export User under Manage Users Click Imports a new user into OmniPass and then select OmniPass Import Export File opi and click Next OmniPass will then prompt you to browse for the file you had previously exported opi file When you select the opi file for importation OmniPass will prompt you for authentication The credentials that will allow a user profile to be imported are the Windows login credentials of the e
82. deo BIOS shadowed Video BIOS successfully copied to shadow RAM Troubleshooting MODEM RESULT CODES The operating system and application software that is factory installed detects the modem characteristics and provides the necessary command strings to operate the modem The internal modem operation is controlled by generic AT commands from the operating system and application software The standard long form result codes may in some cases be displayed on your screen to keep you informed of the actions of your modem The operating system and application software may suppress display of the result codes Examples of result codes are OK NO CARRIER NO DIALTONE CONNECT 53000 Connection complete at 53 000 bps ERROR FAX RING This means an incoming call BUSY NO ANSWER When using the internal modem with applications that are not factory installed refer to the application documentation 59 SS P Series Notebook Tablet PC Restoring Your Pre installed Software The Drivers and Applications Restore DAR CD contains sets of device drivers and Fujitsu utilities in specific directories that are unique to your notebook configuration for use as documented below If you have access to the internet visit the Fujitsu Support website at http www computers us fujitsu com support to i check for the most current information drivers and hints on how to perform recovery and system updates
83. down the brightness adjustment The higher the high temperatures way up brightness the more power your display uses The battery is very old Replace the battery The battery has been exposed to Replace the battery cold The battery is too hot or too Restore the system to normal operating temperature The Charging icon on the Status Indicator panel will flash when the battery is outside its operating range The AC Adapter is defective Replace with another AC Adapter to see if the problem persists Replace any defective AC Adapters Shutdown and Startup Problems The Suspend Resume button The Suspend Resume button is disabled from the Advanced submenu of the Power menu of does not work the setup utility Enable the button from the setup utility long enough You did not hold the button in Hold the button longer This may need to be a few seconds if your application is preventing the CPU from checking for button pushes application software There may be a conflict with the Close all applications and try the button again The system powers up and displays power on the operating system The boot sequence settings of the setup utility are not compat information but fails to load ible with your configuration Set the operating source by pressing the F2 key while the Fujitsu logo is on screen entering the setup utility and adjusting the source settings from the
84. e orientation automatically changes to portrait mode by default The screen orientation default can be changed by going to the Control Panel and double clicking on the Fujitsu Display Control icon Windows XP Pro or Fujitsu Tablet Controls icon Windows XP Tablet PC Edition and selecting the desired defaults from the Display Orientation section After changing the defaults click OK G When you press the Screen Rotation VGA Out button the system screen orientation changes from portrait vertical to landscape horizontal or from landscape to portrait When you press the Fn button while you press then release the Screen Rotation VGA Out button you will automatically Function Fujitsu Menu Utility Button The Function button works in conjunction with the other application buttons to provide additional func tionality for the buttons Refer to specific details above Pressing the Fn button twice in succession causes the Fujitsu Menu Utility to appear on your screen allowing you to modify certain system settings Ctl Alt Del Button Pressing and holding the Ctl Alt Del button for up to 750 milliseconds launches the Logon screen or the Windows Task Manager if the system hasn t yet been configured Getting to Know Your LifeBook CHANGING BUTTON FUNCTIONS The Application A and B buttons can be changed to launch a program or perform an action you select By default the Application A button launches the
85. e A 3 Wireless LAN On Off Switch Location Deactivation using the Intel PROSet Software The WLAN device can also be deactivated in Windows using the Intel PROSet Software The procedure to accomplish this 1 Click Start gt All Programs 2 Select Intel ProSet Wireless then click on Intel ProSet Wireless from the menu that appears The Intel ProSet Wireless utility will be displayed 3 At the bottom left corner of the window select Wireless Off from the dropdown list Deactivation using Atheros Client Utility software 1 Right click on Atheros Client Utility icon in the system tray Select Open Atheros Client Utility from the menu 2 Choose Action and click Disable Radio ACTIVATING THE WLAN DEVICE Activation of the WLAN device can be accomplished using the same methods as the deactivation process Using the Wireless On Off Switch In Windows using the Intel PROSet Software or Atheros Software 88 Wireless LAN User s Guide Configuration of the WLAN Device The WLAN Device can be configured to establish wire less network connectivity using one of the following tools Intel PROSet Software The Intel PROSet Software allows for multiple profile setup and supports auto matic profile switching Support for most industry standard security solutions is contained in this soft ware Atheros Client Utility The Atheros Client Utility software allows for multiple profile setups and sup ports
86. e instructions that appear to either restore your system image or erase all data from your hard disk Troubleshooting AUTOMATICALLY DOWNLOADING DRIVER UPDATES Your system has a convenient tool called the Fujitsu Driver Update EDU utility With FDU you can choose to automatically or manually go to the Fujitsu site to check for new updates for your system The FDU icon 2 should appear in the system tray at the bottom right of your screen roll the cursor over the icons to find the correct one If the FDU icon does not appear in the system tray it can be started by going to Start gt All Programs and clicking on Fujitsu Driver Update this will create the icon automatically To invoke the FDU menu right click on the FDU icon The menu contains the following items Check for updates now Allows for manual driver update search The first time it is used you are prompted to agree to a user agreement After clicking on the icon the FDU auto matically connects with the Fujitsu site to check for updates and downloads them While downloading the icon has a red bar through it indicating that it cannot be used while the download is in process When the update is complete a message appears informing you of the fact Enable Automatic Update Notifications Automatically searches for new updates on a regular basis approximately every 3 days Show update history Brings up a screen that displays a history of updates that h
87. e total of all memory modules installed There may be a discrepancy of several megabytes which are allocated for fixed video memory If the total memory displayed is incorrect i check that your memory upgrade module is properly installed If the module is properly installed and the capacity is still not correctly recognized see Troubleshooting on page 52 40 User Installable Features SD Card Slot SD Card Figure 4 5 Inserting an SD Card Secure Digital Media Your LifeBook notebook Tablet PC supports Secure Digital SD cards on which you can store and transfer data to and from a variety of digital devices These cards use flash memory architecture which means they don t need a power source to retain data Secure Digital SD Cards allow portable storage among a variety of devices such as cell phones GPS systems digital cameras and PDAs SD Cards transfer data quickly with low battery consumption It uses flash memory architecture INSERTING SD CARDS SD Cards are inserted in the SD Card slot Figure 4 5 To insert an SD Card follow these steps inserting or removing an SD Card during your LifeBook notebook Tablet PC s shutdown or bootup process may dam age the card and or your LifeBook note book Tablet PC Do not insert a card into a slot if there is water or any other substance on the card as you may permanently damage the card your LifeBook notebook Tablet PC or bo
88. ect your keyboard To clean the keyboard use a rag dampened slightly with cleaning solution Use extreme care to prevent liquid from dripping between the keys Spraying directly on the keys should be avoided The spray should be applied first to the cloth and then the cloth wiped over the keys BATTERIES Caring for your Batteries Always handle batteries carefully Do not short circuit the battery terminals that is do not touch both terminals with a metal object Do not carry lose batteries in a pocket or purse where they 66 may mix with coins keys or other metal objects Doing so may cause an explosion or fire Do not drop puncture disassemble mutilate or incin erate the battery Recharge batteries only as described in this manual and only in ventilated areas Do not leave batteries in hot locations for more than a day or two Intense heat can shorten battery life Do not leave a battery in storage for longer than six months without recharging it Increasing Battery Life Keep brightness to the lowest comfortable level Set the power management for maximum battery life Put your notebook Tablet PC in Standby mode when it is turned on and you are not actually using it Disable the Windows CD auto insert function Always use fully charged batteries OPTIONAL FLOPPY DISK DRIVE AND FLOPPY DISKS Caring for your Floppy Disks Avoid using floppy disks in damp and dusty locations Ne
89. edge of the LCD screen the Bluetooth antenna is located to the left of the Tab key above the air vent The transmitters in this device must not be co located or oper ated in conjunction with any other antenna or transmitter Export restrictions This product or software contains encryption code which may not be exported or transferred from the US or Canada without an approved US Department of Commerce export license This device complies with Part 15 of FCC Rules as well as ICES 003 B NMB 003 B Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesirable operation Modifications not expressly authorized by Fujitsu Computer Systems Corporation may invalidate the user s right to operate this equipment Canadian Notice To prevent radio interference to the licensed service this device is intended to be operated indoors and away from windows to provide maximum shielding Equipment or its transmit antenna that is installed outdoors is subject to licensing High power radars are allocated as the primary users of 5250 5350 MHz and 5650 5850 MHz and these radars could cause interference and or damage to LELAN license exempt LAN devices operating in these bands 85 y Lifebook P Series Notebook Tablet PC Before Using the Wireless LAN This manual describes the procedures req
90. ending on practical environments the allowable number of computers to be connected may be decreased 99 y Lifebook P Series Notebook Tablet PC Using the Bluetooth Device The Integrated Bluetooth module is an optional device available for Fujitsu mobile computers WHAT IS BLUETOOTH Bluetooth technology is designed as a short range wire less link between mobile devices such as laptop computers phones printers and cameras Bluetooth technology is used to create Personal Area Networks PANs between devices in short range of each other WHERE TO FIND INFORMATION ABOUT BLUETOOTH The Bluetooth module contains a robust Help user s guide to assist you in learning about operation of the Bluetooth device To access the Help file click Start gt All Programs and click on Toshiba Select Bluetooth then select User s Guide For additional information about Bluetooth Tech nology visit the Bluetooth website at www blue tooth com Canadian Notice To prevent radio interference to the licensed service this device is intended to be operated indoors and away from windows to provide maximum shielding Equipment or its transmit antenna that is installed outdoors is subject to licensing Warranty Users are not authorized to modify this product Any modifications invalidate the warranty This equipment may not be modified altered or changed in any way without signed written permission from Fujitsu Unauthori
91. eneral Settings dialog displays 5 Enter a profile name in the Profile Name field 6 Enter the network SSID in the Network Name SSID field 7 Click Infrastructure or Ad Hoc for the operating mode 8 Click Advanced 9 The Mandatory Access Point option is only used if Infrastructure mode is selected Use this option to connect to a specific access point Enter the MAC address for the access point Click OK to save the setting and return to the General Settings page 10 Click Next 11 If you are using Cisco CCX click Cisco Options to enable Cisco CKIP data encryption on the Security Settings page Check the Cisco Compatible Exten sions Options If you have checked the Cisco s Mixed Cell box in the Advanced Setting this option must also be checked 12 Click OK 13 Click Next 14 Select Open Shared WPA Enterprise WPA2 Enterprise WPA Personal or WPA2 Personal in the Network Authentication options 15 Select either None WEP CKIP if Enable Cisco Client eXtentions is enabled use CKIP or WEP or TKIP for the data encryption 16 IfWEP is selected select either 64 or 128 bit for the Encryption Level 17 Select the key index 1 2 3 or 4 18 Enter the WEP key if required If your network does not employ a 802 1x EAP security mecha nism please skip to step 24 89 SS P Series Notebook Tablet PC 19 Click the Enable 802 1x checkbox to enable the 802 1x security option Please con
92. erating condition of your hardware whenever power is applied to your notebook Tablet PC Status and error messages may be displayed before the operating system is loaded If the self test detects failures that are so serious that operation can not continue the operating system will not be loaded PPPoE Point to Point Protocol over Ethernet A protocol for Ethernet using a Point to Point Protocol PPP which is used for connection on the phone line Program An integrated set of coded commands to your computers telling your hardware what to do and how and when to do it Protocol Procedures and rules use to send and receive data between computers Method of sending and receiving data Process used to handle communication errors Conditions required for communication are organized in procedures for correct transfer of information RAM Random Access Memory A hardware component of your notebook Tablet PC that holds binary information both program and data as long as it has the proper power applied to it RAM Module A printed circuit card with memory and associated circuitry which allows the user to add additional memory to the computer without special tools Reset The act of reloading the operating system A reset erases all information stored in RAM Restart See Reset Resume To proceed after interruption In your notebook Tablet PC this refers to returning to active operation after having been in one of
93. erience difficulties adding a user with a blank password to OmniPass you may need to adjust your local security settings First attempt the proce dure explained in the Cannot add Windows user to OmniPass section If the difficulties persist then try the following procedure Click Start Control Panel Administrative Tools and Local Security Settings Expand Local Policies expand Security Options and double click Accounts Limit local account use of blank pass words to console login only This setting should be set to Disabled Dialog appears after OmniPass authentication during Windows Logon After installing OmniPass on your system you can choose to logon to Windows using OmniPass You authenticate with OmniPass via master password or an enrolled security device and OmniPass logs you into Windows You may during this OmniPass authentication see a Login Error dialog box This dialog box occurs when OmniPass was unable to log you into Windows with the credentials supplied username and password This could happen for any of the following reasons Your Windows password has changed Your Windows account has been disabled If you are having difficulties due to the first reason you will need to update OmniPass with your changed Windows account password Click Update Password and you will be prompted with a dialog to reconfirm your password Enter the new password to your Windows user account and click OK If the error pe
94. eries Notebook Tablet PC Outlet Type Location United States Canada Mexico parts of Latin America Japan Korea the Philippines Taiwan Russia and the Commonwealth of Independent States CIS most of Europe parts of Latin America the Middle East parts of Africa Hong Kong India most of South Asia United Kingdom Ireland Malaysia Singapore parts of Africa 0 06 China Australia New Zealand Figure 6 1 Outlet types KEYBOARD Caring for your Keyboard The keyboard of your computer is a very sensitive instrument It is made up of many switches that are activated when you press on the keys The keyboard is a major component of the heat dissipation system in a notebook Tablet PC Due to heat and size considerations the keyboard is not sealed Because the keys are so close together it is not easy for the user to see when liquids have fallen onto the circuitry below the keys Attempting to clean the keyboard with a spray on cleaner or rag soaked with cleaner the liquid can drip onto the circuitry sight unseen Once the liquid seeps between the layers of circuitry it can cause corrosion or other damage to the circuits This can result in keys which no longer operate or which when pressed record the wrong characters and other similar failures There is no repair for this problem other than replace ment The solution is to become aware of the issue and take appropriate steps to prot
95. et PC Specifications The specifications for your particular model may vary To determine the specifications for your system please visit our website at us fujitsu com computers Physical Specifications Dimensions 9 13 w x 6 57 d x 1 36 1 46 232 mm x 167 mm x 34 5 37 mm Processing Specifications CPU Speed Intel Pentium M ULV 753 Front Side 400 MHz Bus FSB Chip set 915GMS Memory Storage Specifications Main RAM 256 MB SDRAM DDR2 400 MHz e 172 pin Micro DIMM slot 256 MB 512 MB and 1 0 GB modules available with a system maximum of 1 0 GB L1 cache 64 KB on die CPU Specifications LifeBook P Series notebook Tablet PC Specifications L2 cache 2 MB on die BIOS ROM 1 MB Boot Block Type Flash ROM Hard disk drive e 1 8 HDD 30 GB or 60 GB IDE 4200 rpm ATA 100 e Shock mounted e SMART Support Display Specifications Display 8 9 TFT WSVGA 1024 x 600 16M colors e Color LCD e Active Digitizer e 32 bit color e External monitor support SXGA 1280 x 1024 maximum e Dot pitch 0 240 x 0 240 mm VRAM Up to 128 MB of shared memory using Unified Memory Architecture UMA Dynamically responds to application requirements and allocates the proper amount of memory for optimal graphics and performance Interface Specifications Integrated Interfaces e Modem RJ 11 e LAN RJ 45 e USB2 0x2 e DC
96. et the same network key as the other side of communication Network name SSID Security Set Identifier When a wireless LAN network is configured grouping is performed to avoid interference or data theft This grouping is performed with Network name SSID In order to improve security the network key is set allowing no communication unless Network name SSID coincides with the network key Open system authentication Null authentication method specified in the 802 11 stan dard that performs no authentication checks on a wire less client before allowing it to associate PEAP Protected Extensible Authentication Protocol An improvement over EAP making authentication much easier to achieve PPPoE Point to Point Protocol over Ethernet A method of allowing the authentication protocol adopted in telephone line connection PPP to be used over an Ethernet Protocol A procedure or rule of delivering data among computers Ordered data communication is allowed by making all conditions required for communication including the method of data transmission reception and actions upon communication errors into proce dures Shared key authentication 802 11 network authentication method in which the AP sends the client device a challenge text packet that the client must then encrypt with the correct WEP key and return to the AP Ifthe client has the wrong key or no key authentication will fail and the client wil
97. evices subject only to the requirement that the sum of the Ringer Equiva lence Numbers of all the devices does not exceed five For safety users should ensure that the electrical ground of the power utility the telephone lines and the metallic water pipes are connected together Users should NOT attempt to make such connections themselves but should contact the appro priate electric inspection authority or elec trician This may be particularly important in rural areas 74 Avis Aux Utilisateurs Du R seau T l phonique Canadien AVIS Le pr sent mat riel est conforme aux sp cifica tions techniques d Industrie Canada applicables au mat riel terminal Cette conformit est confirm e par le num ro d enregistrement Le sigle IC plac devant le num ro d enregistrement 4061A 8687 signifie que Penregistrement s est effectu conform ment une d claration de conformit et indique que les sp cifica tions techniques d Industrie Canada ont t respect es Il implique pas qu Industrie Canada a approuv le mat riel Avant de connecter cet quipement une ligne t l pho nique Putilisateur doit v rifier s il est permis de connecter cet quipement aux installations de t l com munications locales L utilisateur est averti que m me la conformit aux normes de certification ne peut dans certains cas emp cher la d gradation du service Les r parations de l quipement de t l communic
98. expand the system memory capacity of your system hence improving overall performance See Memory Upgrade Module on page 39 Air Vents The air vents allow proper air circulation to ensure that the system does not overheat To protect your system from damage and to optimize system performance be sure to keep all air all vents unobstructed clean and clear of debris This may require periodic cleaning depending upon the environment in which the system is used Do not operate the system in areas where the air vents can be obstructed such as in tight enclosures or on soft surfaces like a bed or cushion 13 SS P Series Notebook Tablet PC 14 AC Adapter Hard Drive Access Charging Battery Level Power Button Indicator NumLk o ScrLk CapsLk Figure 2 9 Status Indicators Status Indicators The status indicators display symbols that correspond to specific components of your notebook Tablet PC Figure 2 9 The symbols show how each of those components is operating Note that keyboard related indicators CapsLk NumLk ScrLk are located above the keyboard POWER INDICATOR The Power indicator symbol located on the power button shows whether your system is operational When it is lit blue it means that there is power to your computer and that it is ready for use gt AC ADAPTER BATTERY CHARGING INDICATOR The AC Adapter Battery Ch
99. external monitor and it does not come on Your external monitor may not be compatible with your system See your monitor documentation and the External Monitor Support portions of the Specifications section See Specifications on page 71 Miscellaneous Problems An error message is displayed on the screen during the operation of an application Application software often has its own set of error message displays See your application manual and help displays screens for more information Not all messages are errors some may simply be status Can t change screen orientation using Tablet and Pen Settings Incorrect system resolution This LifeBook uses 1024x600 resolution but this feature has a minimum resolution of 1024x768 To rotate the screen use the Rotation button 57 y Lifebook P Series Notebook Tablet PC POWER ON SELF TEST MESSAGES The following is an alphabetic list of error and status messages that Phoenix BIOS and or your operating system can generate and an explanation of each message Error messages are marked with an If an error message is displayed that is not in this list write it down and check your operating system documentation both on screen and in the manual If you can find no reference to the message and its meaning is not clear contact your support representative for assistance nnnn Cache SRAM Passed Where nnnn is the amount of system cache in kiloby
100. eyboard 4 Push the latch towards the display See A in Figure 2 11 The latch will click twice and the top latch disappears and the bottom latch appears See B in Figure 2 11 Lay the display flush against the system so that the latch rests in the slot in the battery pack You can now use the system as a tablet Figure 2 15 A Top latch Display Side Bottom latch Figure 2 11 Using the Display Latch 5 To return the system to notebook configuration repeat step 3 and 2 Be sure to turn the display in the opposite direction when performing step 2 Figure 2 12 Fully open display Figure 2 15 System in tablet configuration ADJUSTING DISPLAY PANEL BRIGHTNESS Once you have turned on your system you may want to adjust the brightness level of the screen to a more comfortable viewing level There are three ways to adjust the brightness keyboard power management utility and Fujitsu menu Getting to Know Your LifeBook Using Keyboard to Adjust Brightness Adjusting the brightness using the keyboard changes the system setting i e the settings you make via the func tion keys automatically changes the brightness settings in the system s Brightness Control settings Fn F6 Pressing repeatedly will lower the brightness of your display Fn F7 Pressing repeatedly will increase the brightness of the display Using Control Pa
101. eypad oooooooococcomcoromm 18 problems 422 Sei m ans 52 windows Keys 0 cece cece e eee eens 18 L LAN RJ 45 Jack woe cece cceeceeeeeeeeeeeees 12 LifeBook Application Panel 20 LifeBook Application Tablet PC Buttons 9 20 LifeBook P Series notebook CALE nee er eae NS 65 specifications vu sun a eden sn 71 StOTING ea e aeatee apt care R aioe a 65 trayeling sn ee nn 65 unpacking an NEN 7 LifeBook P Series notebook specifications additional vana rad 72 agency approval 0 ce eee eee eee ee 72 display specifications oooooomommmmm o 71 environmental sense 72 physical specifications 04 71 72 POWER Boer Sen eke ON eos ee 72 Local Area Network LAN 0oooooooooomooo 8 M Memory Capacity A 40 compartMent EE BEKEN eee eee 13 39 Installing cocoa sa 39 problems cita 53 TEMOV OS are e nase 39 upgrade module ooooocccoccoccoccccco 39 Memory Stick installing cities ubic 41 Microphone Jack 00 eee ee eee ee ee 8 46 MICCOPLOCESSOF arre 71 moden iii rai a eaat 8 12 Modem RJ 11 Port o oooooooooooooo 12 Modem Jack 2 ee oe epi 46 Modem Result Codes oooooocococococnccno 59 Mouse problems cit des 52 MOUSE a 53 N Numeric Keypad sesers 0 cece eee eee oo 18 Numlk Indicator 0 eee eee eee ee eee 15 112 O optional accessories 0 ec eee eee eee eee ee 7 P P
102. f 2 4 GHz ISM band which can freely be used without radio communi cation license Infrared Light just beyond the red portion of the visible light spectrum which is invisible to humans Infrastructure A designation of Wireless LAN network configurations It indicates a form of communication using an Access Point IP Address An address used for computers to communicate in the TCP IP environment Current IPv4 version 4 uses four values in the range between 1 and 255 Example 192 168 100 123 There are two types of IP address global address and private address The global address is an only address in the world It is controlled by JPNIC Japan Network Information Center A private address is an only address in the closed network IR An abbreviation for infrared IrDA Infrared Data Association An organization which produces standards for communication using infrared as the carrier IRQ Interrupt Request An acronym for the hardware signal to the CPU that an external event has occurred which needs to be processed KB Kilobyte LAN Local Area Network An interconnection of computers and peripherals within a single limited geographic location which can pass programs and data amongst themselves LCD Liquid Crystal Display A type of display which makes images by controlling the orientation of crystals in a crystalline liquid Lithium ion Battery A type of rechargeable battery which has a high po
103. gs of Full computer name and Workgroup a The setting of Full computer name denotes the name for identifying the computer Any name can be assigned for each personal computer Li Enter the desired name in less than 15 ASCII character code format Identifiability can be enhanced by entering the model number the user name and other factors To change the name click Change and then proceed in accordance with the instruction messages displayed on the screen b Workgroup name is the group name of the network Enter the desired name in less than 15 ASCII character code format For ad hoc connection Assign the same network name to all personal computers existing on the network For access point infrastructure connection Assign the name of the work group to be accessed 6 Click the OK button If a message is displayed that requests you to restart the personal computer click Yes to restart the computer Setting the sharing function Set the sharing function to make file and or printer sharing with other network connected personal computers valid This operation is not required unless the sharing func tion is to be used The folder and printer for which the sharing function has been set will be usable from any personal computer present on the network To share a file and or the connected printer you need to be logged in as an administrator iJ Setting the Microsoft
104. he optional wireless LAN or Bluetooth device on and off Display Rotation R C This icon indicates the direction in which the display should be rotated when converting to tablet mode Table 2 1 System icons Getting to Know Your LifeBook Latch 0 O O 0 Display Panel w Fingerprint ln ee Panel LifeBook Suspend Application 00000 O O Resume pplication Butt Tablet PC j OB utton Buttons Q d Built in Microphone Quick Point Pointing Device in front of keyboard Rotation Hinge Figure 2 4 LifeBook P Series notebook Tablet PC with display open FRONT AND DISPLAY COMPONENTS The following is a brief description of the front and display features of the LifeBook P Series notebook Tablet PC Figure 2 4 Display Panel Latch The display panel latch holds the display panel in posi tion Display Panel The display panel is a color LCD panel with back lighting for the display of text and graphics and touch screen functionality Built in Microphone The built in microphone allows you to input mono audio LifeBook Application Tablet PC Buttons The LifeBook P Series notebook Tablet PC Application Buttons provide application launch capabilities See LifeBook Application Panel on page 20 Suspend Resume Button The Suspend Resume button allows you t
105. heck of network key upon authentica tion clients can connect to the access point without submitting correct network keys However in case of 80 actual communications the same network key must be set Open system authentication is sometimes called Open key authentication Operating System A group of control programs that convert application commands including driver programs into the exact form required by a specific brand and model of micro processor in order to produce the desired results from that particular equipment Partition A block of space on a hard drive which is set aside and made to appear to the operating system as if it were a separate disk and addressed by the operating system accordingly PCMCIA PCMCIA is a trademark of the Personal Computer Memory Card International Association The Personal Computer Memory Card International Association is an organization that sets standards for add in cards for personal computers Peripheral Device A piece of equipment which performs a specific function associated with but not integral to a computer Examples a printer a modem a CD ROM Pitch Keyboard The distance between the centers of the letter keys of a keyboard Pixel The smallest element of a display a dot of color on your display screen The more pixels per area the clearer your image will appear POST Power On Self Test A program which is part of the BIOS which checks the configuration and op
106. ication CD s for third party software Figure 2 3 Optional Port Replicator OPTIONAL ACCESSORIES A variety of optional accessories is available for use with your LifeBook P Series notebook Tablet PC For the latest list of accessories available be sure to frequently check the Fujitsu website at www shopfujitsu com Refer to the instructions provided with these accessories for details on their use y Lifebook P Series Notebook Tablet PC Locating the Controls and Connectors Connectors and peripheral interfaces on the LifeBook P Series notebook Tablet PC and the optional port repli cator allow you to connect a variety of devices Specific locations are illustrated in Figures 2 4 through 2 8 The table below provides a short description of each icon on the LifeBook P Series notebook Tablet PC Each of the icons is either molded into or printed on the system chassis x LifeBook Connection Purpose Icon DC in connector Connect an external power source such as the AC adapter or auto airline adapter Secure Digital The Secure Digital SD card slot allows you to install a flash memory card for ata storage Flash memory cards allow you to transfer data to and from a SD Slot data storage Flash y cards allow you to transfer data to and f variety of different digital devices USB Ports Connect Universal Serial Bus 2 0 or 1 1 compliant devices to the notebook Tablet PC Microphone Jack Neh
107. iderable amount of precious data can be saved SRAM Static random access memory A specific technology of making RAM which does not require periodic data refreshing SSID Service Set Identifier Specifies which network you are joining Some systems allow you to specify any SSID as an option so you can join any network Standby To make inoperative for a period of time Your note book Tablet PC uses various suspension states to reduce power consumption and prolong the charge of your battery Status Indicator A display which reports the condition of some portion of your hardware On your notebook Tablet PC this is an LCD screen just above the keyboard Stereo audio A system using two channels to process sound from two different sources Subnet mask TCP IP network is controlled by being divided into multiple smaller networks subnets IP address consists of the subnet address and the address of each computer Subnet mask defines how many bits of IP address comprise the subnet address The same value shall be set among computers communicating with each other SVGA Super VGA S Video Super Video A component video system for driving a TV or computer monitor System Clock An oscillator of fixed precise frequency which synchro nizes the operation of the system and is counted to provide time of day and date TCP IP 81 y Lifebook P Series Notebook Tablet PC Transmission Control Protocol Internet Protoco
108. ion to use the online URL links LifeBook P Series Notebook Tablet PC 2 Getting to Know Your LifeBook LifeBook P Series Notebook Tablet PC Getting to Know Your LifeBook Figure 2 1 Fujitsu LifeBook P Series notebook Tablet PC Overview This section describes the components of your Fujitsu LifeBook P Series notebook Tablet PC We strongly recommend that you read it before using your system even if you are already familiar with mobile computers UNPACKING When you receive your LifeBook P Series notebook Tablet PC unpack it carefully and compare the parts you have received with the items listed below The operating system installed on your computer determines whether your system is classified as a notebook or Tablet PC A For a pre configured model you should have LifeBook P Series notebook Tablet PC Figure 2 1 AC adapter with AC power cord Figure 2 2 Phone Modem RJ 11 telephone cable Pen Pen tether Driver and Application Restore DAR CD Recovery CD Getting Started Guide User s Guide this document International Limited Warranty Booklet Certificate of Authenticity Lithium ion battery pre installed You may also have one or more of the following devices in the box depending upon the configuration of your system Port Replicator Figure 2 3 External USB Floppy Disk Drive Additional battery s Appl
109. ions 0 89 Configuration Using Intel PROSet Software 89 Configuration Using Atheros Client Utility 90 Connection to the network 91 Troubleshooting the WLAN Troubleshooting 0 0000 95 Wireless LAN Glossary Troubleshooting 0 0 0000 96 IP address information About IP Addresses 0 00000 e eee 98 WLAN Specifications Specifications ooo ee en 99 Using the Bluetooth Device What is Bluetooth 22222 100 Where to Find Information About Bluetooth 100 APPENDIX B USING THE FINGERPRINT SWIPE SENSOR Fingerprint Sensor Device Introducing the Fingerprint Sensor Device 103 Getting Started 0 0 0 103 Installing OmniPass 2 2220 103 User Enrollment 222222 2c ee eee 104 Using OmniPass 0 000000 105 Configuring OmniPass 0 107 OmniPass Control Center 108 Troubleshooting 22200 109 Table of Contents LifeBook P Series Notebook Tablet PC 1 Preface LifeBook P Series Notebook Tablet PC Preface ABOUT THIS GUIDE The LifeBook P Series notebook Tablet PC from Fujitsu Computer Systems Corporation is a small yet powerful convertible computer It can be used either as a standard notebook using keyboard input or in tablet configuration using pen input It is powered by an Intel Pentium M microprocessor has
110. is operating in IEEE 802 11b mode and Orthogonal Frequency Divi sion Multiplexing OFDM when operating in IEEE 802 11a or IEEE 802 11g mode The WLAN device is Wi Fi certified and operates at the maximum data transfer rate of 54 Mbps in IEEE 802 11a or IEEE 802 11g mode and 11 Mbps in IEEE 802 11b mode The maximum communication range indoors is approximately 80 feet 25 meters However that range will increase or decrease depending on factors such as number of walls reflective material or inter ference from external RF sources The WLAN device supports the following encryption methods WEP CKIP TKIP and AES encryption WIRELESS LAN MODES USING THIS DEVICE Ad Hoc Mode See Figure A 1 Ad Hoc Mode refers to a wireless network architecture where wireless network connectivity between multiple computers is established without a central wireless network device typically known as Access Point s Connectivity is accomplished using only client devices in a peer to peer fashion That is why Ad Hoc networks are also known as peer to peer networks Ad Hoc networks are an easy and inexpensive method for estab lishing network connectivity between multiple computers Ad Hoc mode requires that the SSID network authenti cation and encryption key settings are identically configured on all computers in the Ad Hoc network Access Point Infrastructure Mode See Figure A 2 Infrastructure mode refers to a wireless networ
111. k archi tecture in which devices communicate with wireless or wired network devices by communicating through an Access Point In infrastructure mode wireless devices can communicate with each other or can communicate with a wired network Corporate wireless networks operate in infrastructure mode because they require access to the wired LAN in order to access computers devices and services such as file servers printers and databases How to Handle This Device The WLAN device comes pre installed in your mobile computer Under normal circumstances it should not be necessary for you to remove or re install it The Operating System that your mobile computer comes with has been pre configured to support the WLAN device WIRELESS NETWORK CONSIDERATIONS The WLAN devices support IEEE 802 11a IEEE 802 11b and IEEE 802 11g The WLAN devices operate in the 2 4GHz ISM band and the 5 GHz lower middle and upper UNII bands Figure A 2 Access Point Infrastructure Mode Network ADSL modem cable modem or similar Internet KT Wireless LAN User s Guide The maximum range of the WLAN device indoors is typically 80 feet 25 meters Please note that the max imum range you achieve may be shorter or longer than 80 feet depending on factors such as access point transmit power number and density of obstructions or external RF interference Microwave ovens will interfere with the operation of WLAN device
112. k is active Getting to Know Your LifeBook 15 SS P Series Notebook Tablet PC 16 Latch Latch Slot Display Cover Figure 2 10 Opening the display Display Panel The convertible design of your LifeBook P Series note book Tablet PC allows you to open the display fully rotate it 180 degrees and lay it face up on the keyboard This allows you to use the system as a tablet much as you would a pad of paper OPENING THE DISPLAY PANEL Lift the display cover backwards being careful not to touch the screen until it is at a comfortable viewing angle Figure 2 10 USING THE SYSTEM AS A TABLET If you would like to use the system as a tablet perform the following steps Rotate the system display only in the direction indicated in the procedure Turning the display in the incorrect direction could damage the hinge ZA In the following step be sure to position the display perpendicular to the keyboard otherwise the keyboard or display cover could get scratched A 1 Lift the display until it is perpendicular to the keyboard Figure 2 12 2 When the display is perpendicular to the keyboard rotate it clockwise when viewed from the top Be very careful to rotate it in the direction indicated Figure 2 13 Turn the display 180 degrees so that it is facing backwards Figure 2 14 3 Holding the top edge of the display panel pull it forward until it is lying nearly atop the k
113. k line Application Key Cursor Keys Figure 2 16 Keyboard Keyboard USING THE KEYBOARD Your LifeBook P Series notebook Tablet PC has an inte gral 82 key keyboard The keys perform all the standard functions ofa 101 key keyboard including the Windows keys and other special function keys This section describes the following keys Figure 2 16 Numeric keypad Your system allows certain keys to serve dual purposes both as standard characters and as numeric and mathematical keys The ability to tog gle between the standard character and numerical keys is controlled through the NumLk key Cursor keys Your keyboard contains four arrow keys for moving the cursor or insertion point to the right left up or down within windows applications and documents Function keys The keys labeled F1 through F12 are used in conjunction with the Fn key to produce special actions that vary depending on what program is running Windows keys These keys work with your Windows operating system and function the same as the onscreen Start menu button or the right button on your pointing device 18 NUMERIC KEYPAD Certain keys on the keyboard perform dual functions as both standard character keys and numeric keypad keys NumLk can be activated by pressing the NumLk key Turning off the NumLk feature is done the same way Once this feature is activated you can enter numerals 0 through 9 perform addition subtraction
114. ker ef 2285 O A _ Label approximate Port Replicator I location Connector a 10000 i en ANNE 00000 DAOUD OOOI air Vents i m Memory 00000 UNAIUUIONILT DIN Compartment ke A a g Battery a oF BES i Lithium ion i 9 Battery WU Figure 2 8 LifeBook P Series notebook Tablet PC bottom panel BOTTOM COMPONENTS Following is a brief description of your notebook Tablet PC s bottom panel components Figure 2 8 Lithium on Battery Compartment The battery compartment contains the internal Lithium ion battery The battery should be removed when the computer is stored over a long period of time or for swapping a discharged battery with a charged Lithium ion battery See Lithium ion Battery on page 37 Port Replicator Connector This connector allows you to connect the optional port replicator Speaker The speaker allows you to listen to sound from your system Main Unit and Configuration Label The configuration label shows the model number and other information about your LifeBook P Series note book Tablet PC In addition the configuration portion of the label has the serial number and manufacturer information that you will need to give your support representative It identifies the exact version of various components of your system Memory Upgrade Compartment Your notebook Tablet PC comes with high speed DDR2 Synchronous Dynamic RAM SDRAM The memory upgrade compartment allows you to
115. l A standard Internet protocol that is most widely used TFT Thin Film Transistor A technology for flat display panels which uses a thin film matrix of transistors to control each pixel of the display screen individually UL Underwriters Laboratories An independent organiza tion that tests and certifies the electrical safety of devices USB Universal Serial Bus Standard that allows you to simultaneously connect up to 127 USB devices such as game pads pointing devices printers and keyboards to your computer VGA Video Graphics Array A video display standard originally introduced by IBM with the PS 2 series of personal computers VRAM Video Random Access Memory A memory dedicated to video display data and control Wi Fi Compatible Wi Fi Wireless Fidelity Identifies that the product has passed the interoperability test supplied by the WECA Wireless Ethernet Compatibility Alliance which guar antees the interoperability of wireless IEEE 802 11 LAN products For more information on the Wi Fi standard go to the WECA website at www wirelessethernet com WLAN Wireless Local Area Network A wireless interconnec tion of computers and peripherals within a single limited geographic location which can pass programs and data amongst themselves Write Protect Prevent alteration of the binary state of all bits in a storage media Example all information on a device such as a floppy diskette a block of spa
116. l not be allowed to associate with the AP Shared key authentica tion is not considered secure because a hacker who detects both the clear text challenge and the same chal lenge encrypted with a WEP key can decipher the WEP key SSID Service Set Identifier Service Set Identifier a 32 character unique identifier attached to the header of packets sent over a WLAN that acts as a password when a mobile device tries to connect to the BSS The SSID differentiates one WLAN from another so all access points and all devices attempting to connect to a specific WLAN must use the same SSID A device will not be permitted to join the BSS unless it can provide the unique SSID Because the SSID is broadcast in plain text it does not supply any security to the network Subnet mask TCP IP network is controlled by being divided into multiple smaller networks subnets IP address consists of the subnet address and the address of each computer Subnet mask defines how many bits of IP address comprise the subnet address The same value shall be set among computers communicating with each other TCP IP Transmission Control Protocol Internet Protocol A standard protocol of the Internet Wireless LAN User s Guide TKIP Temporal Key Integrity Protocol Security feature that is a WEP enhancement to defend against known wireless data security issues WEP Wired Equivalent Privacy Standard wireless security provided by the Wi Fi stan da
117. lding Fn will toggle the built in pointing device on and off Note that the Fn F4 combination only works if Manual Setting is selected in the BIOS See Entering the BIOS Setup Utility on page 30 Fn F5 Pressing F5 while holding Fn allows you to toggle between video compensation and no compensation Video compensation controls spacing on the display When it is enabled displays with less than 1024 x 600 or 800 x 600 pixel resolution will still cover the entire screen Fn F6 Pressing F6 repeatedly while holding Fn will lower the brightness of your display Note that adjusting the brightness using the keyboard changes the system setting Fn F7 Pressing F7 repeatedly while holding Fn will increase the brightness of the display Fn F8 Pressing F8 repeatedly while holding Fn will decrease the volume of your system Fn F9 Pressing F9 repeatedly while holding Fn will increase the volume of your system Fn F10 Pressing F10 while holding Fn allows you to change your selection of where to send your display video Each time you press the combination of keys you will step to the next choice The choices in order are built in display panel only external moni tor only and both built in display panel and external monitor Getting to Know Your LifeBook 19 SS P Series Notebook Tablet PC 20 L 4 7 8 Zy D Application A Button Application B Button Button 3 But
118. less LAN device must be in strict accordance with the instructions included in the user documentation provided with the product Any changes or modifications made to this device that are not expressly approved by the manufacturer may void the user s authority to operate the equipment The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device or the substitution or attachment of connecting cables and equipment other than those specified by the manufacturer It is the responsibility of the user to correct any interference caused by such unauthorized modification substitution or attachment The manufacturer and its autho rized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failure to comply with these guidelines This device must not be co located or operating in conjunction with any other antenna or transmitter For operation within 5 15 5 25 GHz frequency range the device is restricted to indoor environments and the antenna of this device must be integral Federal Communications Commission statement This device complies with Part 15 of FCC Rules Operation is subject to the following two conditions 1 This device may not cause interference and 2 This device must accept any interference including interference that may cause undesired operation of this device Wireless LAN User s Guide FC
119. lready enrolled in OmniPass the OmniPass import function will fail OMNIPASS CONTROL CENTER This section will serve to explain functions within the OmniPass Control Center that weren t explained earlier You can access the OmniPass Control Center any of three ways Double click the golden OmniPass key shaped icon in the Windows taskbar typically in the lower right cor ner of the desktop Click the Start button select the Programs group select the Softex program group and click the OmniPass Control Center selection Open the Windows Control Panel accessible via Start button gt Settings gt Control Panel and double click the Softex OmniPass icon User Management The User Management tab has two major interfaces Add Remove User and Import Export User Import Export User functionality is documented in Exporting and Importing Users on page 107 Add Remove User functionality is straightforward If you click Adds a new user to OmniPass you will start the OmniPass Enrollment Wizard The Enrollment Wizard is documented in User Enrollment on page 104 If you click Removes a user from OmniPass OmniPass will prompt you to authenticate Authenticate with the credentials or enrolled fingerprint of the user you wish to remove OmniPass will prompt you to confirm user removal Click OK to complete user removal A User Settings The User Settings tab has four interfaces Audio Settings Taskbar Tips a
120. me will begin Registering Windows with Microsoft In order to ensure that you receive the most benefit from the Windows operating system it should be registered the first time you use it After you receive the Windows Welcome screen you will be prompted to enter registration information in the following order First of all you will need to read and accept the End User License Agreements EULAs After accepting the EULAs you will be asked if you want to enable the Auto matic Updates feature Acceptance of this feature is recommended because it allows your system to be updated automatically whenever an important change becomes available for your notebook Tablet PC If you reject the terms of the license agreement you will be asked to review the license agreement for information on returning Windows or to shut down your LifeBook notebook Tablet PC You cannot use your LifeBook note book Tablet PC until you have accepted the License Agreement If you stop the process your system will return to the beginning of the Windows Welcome Process even if you shut your system down and start it up again Li Several additional windows will appear prompting you to enter a name and description for your computer an Administrator password and a domain name Read the instructions on the screens carefully and fill in the infor mation as directed You will then be automatically connected to the Internet if you have an ap
121. memory capacity you may install a memory upgrade module The memory upgrade must be a dual in line DIMM SDRAM module To ensure 100 compati bility purchase the SDRAM module only from the Fujitsu web store at www shopfujitsu com Do not remove any screws from the memory upgrade module compartment except those specifically shown in the directions for installing and removing the module INSTALLING MEMORY UPGRADE MODULES 1 Turn off power to your LifeBook notebook Tablet PC and remove any power adapter AC or auto airline 2 Make sure that all the connector covers are closed 3 Turn the system bottom side up and remove the screws of the memory upgrade module compart ment Figure 4 2 Remove the cover Figure 4 2 Opening the Memory Upgrade Compartment Remove the memory upgrade module from the static guarded sleeve Align the memory upgrade module with the component side up Align the connector edge of the memory upgrade module with the connector slot in the compartment Figure 4 3 User Installable Features 7 Insert the memory upgrade module at a 45 angle Press the connector edge of the module firmly down and into the connector until it lodges under the retaining clip You will hear a click when it is prop erly in place Figure 4 3 Installing a Memory Module 8 Replace the cover Figure 4 4 9 Replace the screws 8 Figure 4 4 Replacing
122. ment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet that is on a different circuit than the receiver Consult the dealer or an experienced radio TV technician for help Shielded interconnect cables must be employed with this equipment to ensure compliance with the pertinent RF emission limits governing this device Notice to Users of the US Telephone Network This equipment contains an internal modem that complies with Part 68 of the FCC rules On the bottom of this equipment is a label that contains among other information the FCC registration number and ringer equivalence number REN for this equipment If requested this information must be provided to the tele phone company This equipment is designed to be connected to the tele phone network or premises wiring using a standard jack type USOC RJ11C A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA A compliant telephone cord and modular plug is provided with this product It is designed to be connected to a compatible modula
123. n about the items click on the Help button Adapter MAC Address Band Supported Data Rates 93 y Lifebook P Series Notebook Tablet PC 94 Radio Frequency Channel Number Network Authentication Data Encryption 802 1x Authentication Type 802 1x Authentication Protocol CCX Version CCX TPC CCX Power Levels Access Point MAC Address Mandatory Access Point Wireless LAN User s Guide Troubleshooting the WLAN TROUBLESHOOTING Causes and countermeasures for troubles you may encounter while using your wireless LAN are described in the following table Problem Possible Cause Possible Solution Unavailable Incorrect network Ad hoc connection verify that the network names SSID s and network network name SSID or keys WEP of all computers to be connected have been configured connection network key correctly SSID s and WEP key values must be identical on each machine Access Point Infrastructure connection set the network name SSID and network key to the same values as those of the access point Set the Network Authentication value identically to that of the Access Point Please consult your network administrator for this value if necessary Weak received signal strength and or link quality Ad hoc connection Retry connection after shortening the distance to the destination computer or removing any obstacles for better sight Access Point Infrastructure connection Retry con
124. nd Enrollment User settings allow users to customize OmniPass to suit individual preferences Under User Settings Audio Settings and Taskbar Tips Removing a user will automatically destroy all OmniPass data associated with that user All identities and credentials associated with the user will be lost If you are sure about removing the user we recommend you export the user profile you can set how OmniPass notifies the user of OmniPass events e g successful login access denied etc The details of each setting under the Audio Settings and Taskbar Tips interfaces are self explanatory The Enrollment interface allows you to enroll finger prints For the procedure to enroll and authentication device refer to Chapter 2 3 To enroll additional finger prints click Enroll Authentication Device and authen ticate with OmniPass Select the fingerprint recognition device in the Select Authentication Device screen it should already be marked by a green check if you have a finger enrolled and click Next System Settings The OmniPass Startup Options interface can be found in the System Settings tab With these options you can specify how your OmniPass Logon is tied to your Windows Logon The first option Automatically log on to OmniPass as the current user will do just as it says during Windows login you will be logged on to OmniPass using your Windows login credentials If the user logging into Windows was ne
125. ndard Its maximum speed of 53000 bps is the highest allowed by FCC and its actual connection rate depends on the line conditions The maximum speed is 33600 bps at upload Li Anti theft Lock Slot The anti theft lock slot allows you to attach a optional physical lock down device LAN RJ 45 Port The internal LAN RJ 45 port is used for an internal 10 100Base Tx Ethernet See Internal LAN RJ 45 jack on page 46 External Video Port The external video port allows you to connect an external CRT monitor or LCD projector Note that when the optional Port Replicator is attached to the system you must use the external video port on the Port Repli cator rather than the port on the system See External Video Port on page 47 12 Air Vents The air vents allow proper air circulation to ensure that the system does not overheat To protect your notebook Tablet PC from damage and to optimize system performance be sure to keep all air all vents unobstructed clean and clear of debris This may require periodic cleaning depending upon the environment in which the system is used A Do not operate the notebook Tablet PC in areas where the air vents can be obstructed such as in tight enclosures or on soft surfaces like a bed or cushion Getting to Know Your LifeBook M ea N al 6 E o De Spea
126. nection after short ening the distance to the access point or removing any obstacles for better sight To check the wave condition refer to the following page Confirming the status of the radio waves on page 93 The WLAN device has been deactivated or disabled Check if the wireless switch is turned ON Also verify Disable Radio is not checked in Network setting window Refer to Activating the Wireless LAN on page 88 The computer to be connected is turned off Check if the computer to be connected is turned ON RF interference from Access Points or other wireless networks The use of identical or overlapping RF channels can cause interference with the operation of the WLAN device Change the channel of your Access Point to a channel that does not overlap with the interfering device Wireless network authentication has failed Re check your Network Authentication Encryption and Security settings Incorrectly configured security settings such as an incorrectly typed WEP key a misconfigured LEAP username or an incorrectly chosen authentication method will cause the LAN device to associate but not authenticate to the wireless network Incorrectly configured network settings Recheck the configuration of your network settings For the method of checking refer to the following page Connection to the Network on page 91 Incorrect IP address configuration This
127. nel to Adjust Brightness Windows XP Pro To adjust brightness with the power management utility click Start gt Control Panel gt Brightness Control Set the screen brightness slider for battery and AC power scenarios Windows XP Tablet PC Edition To adjust brightness with the Tablet and Pen Settings utility click Start gt Control Panel gt Tablet and Pen Settings then select the Display tab Using the Fujitsu Menu to Adjust Brightness To adjust brightness using the Fujitsu menu click on the Fujitsu Menu icon in the system tray in the lower right corner of the screen From the menu that appears select Brightness Control The Brightness Control window will open Set the screen brightness slider for battery and AC power scenarios If using AC power your brightness setting is set to its highest level by default If using battery power your brightness settings is set to approximately mid level by default The higher the brightness level the more power the LifeBook P Series notebook Tablet PC will consume and the faster your batteries will discharge For maximum battery life make sure that the brightness is set as low as possible iJ 17 SS P Series Notebook Tablet PC Function Keys Insert Delete Pause Prt Sc SysRal Break Fn Key Start Key Numeric Keypad outlined with thick blac
128. niPass user To add a new identity click New Identity or double click Click here to add a new identity Name the new identity and click OK then click Apply You can now switch to the new identity and start remembering passwords To delete an identity highlight the identity you want to delete and click Delete Identity then click Apply When you delete an identity all of its associated remembered sites and password protected dialogs are lost Li To set the default identity highlight the identity you want as default and click Set as Default click Apply to ensure the settings are saved If you log in to OmniPass with a fingerprint device you will automati cally be logged in to the default identity for that OmniPass user You can choose the identity with which you are logging in if you login using master password Fingerprint Sensor User s Guide Choosing User Identity during Login To choose your identity during login type your user name in the User Name field Press Tab and see that the Domain field self populates Click the Password field to bring the cursor to it and you will see the pull down menu in the Identity field Select the identity you wish to login as and then click OK to login Switch User Identity To switch identities at any time right click the OmniPass system tray icon and click Switch User Iden tity from the submenu The Switch Identity dialog will appear Select the
129. ns over the phone Li Do not return a failed notebook Tablet PC to your supplier until you have talked to a support representative 9 If you have tried the solutions suggested in the Troubleshooting Table and checked our website for possible solutions without success contact your support representative Toll free 1 800 8Fujitsu E mail 8fujitsu us fujitsu com Website http www computers us fujitsu com support Troubleshooting Before you place the call you should have the following information ready so that the customer support repre sentative can provide you with the fastest possible solu tion Product name Product configuration number Product serial number Purchase date Conditions under which the problem occurred Any error messages that have occurred Type of device connected if any See the Configuration Label on the bottom of your notebook Tablet PC for configuration and serial numbers See figure 2 8 on page 13 for location SPECIFIC PROBLEMS Using the Troubleshooting Table When you have problems with your notebook Tablet PC try to find the symptoms under the Problem column of the troubleshooting table for the feature giving you difficulty You will find a description of common causes for that symptom under the column Possible Cause and what if anything you can do to correct the condition under Possible Solutions All possible causes or solutions may not apply to your note
130. o suspend system activity without powering off resume your system from standby mode and power on your system when it has been shut down from the Windows oper ating system See Power On on page 30 Keyboard A full function keyboard with dedicated Windows keys See Keyboard on page 18 Quick Point Pointing Device The Quick Point pointing device consists of two mouse like buttons one scroll button and a cursor control button located near the center of the keyboard See Quick Point Pointing Device Touch Screen on page 22 Rotation Hinge The rotation hinge allows you to transform your computer from a notebook configuration into a tablet configuration See Using the System as a Tablet on page 16 Fingerprint Sensor The optional fingerprint recognition sensor allows you to log into Windows or other applications by replacing your username and password See Fingerprint Sensor Device on page 103 Status Indicator Panel The Status Indicator Panel displays symbols that corre spond to specific components of your LifeBook P Series notebook Tablet PC See Status Indicators on page 14 y Lifebook P Series Notebook Tablet PC Microphone Jack Compact F ash Card Slot o USB 2 0 Port Headphone Jack Compact Flash Card Eject Button Figure 2 5 LifeBook P Series notebook Tablet PC left side panel LEFT SIDE PANEL C
131. of the Suspend Resume button and can be enabled and disabled in Windows WINDOWS POWER MANAGEMENT The Power Options icon located in the Windows Control Panel allows you to configure some of the power management settings For example you can use the Power Options to set the timeout values for turning off the display and hard disks whether you are running the notebook Tablet PC on battery power or one of the adapters RESTARTING THE SYSTEM If your system is on and you need to restart it be sure that you use the following procedure 1 Click the Start button and then click Turn Off Computer 2 Select the Restart button from within the Turn Off Computer window 33 y Lifebook P Series Notebook Tablet PC Turning off your system without exiting i Windows or turning on your system within 10 seconds of the system being shut off may cause an error when you start the next time POWER OFF Before turning off the power by choosing Turn Off Computer from the Windows Start menu check that the Hard Drive access indicator is off See Figure 2 9 on page 14 If you turn off the power while accessing a disk there is a risk of data loss To ensure that your notebook Tablet PC shuts down without error use the Windows shut down procedure Using the correct procedure to shut down from Windows allows your notebook Tablet PC to complete its operations and turn off power in the proper sequence to avoid errors The proper
132. onnect the power plug Pull the plug not the cord Clean your system with a damp lint free cloth Do not use abrasives or solvents Use a soft cloth to remove dust from the screen Never use glass cleaners Storing your LifeBook If storing your notebook Tablet PC for a month or longer turn the system off fully charge the battery then remove and store all Lithium ion batteries Store your notebook Tablet PC and batteries sepa rately If you store your system with a battery installed the battery will discharge and battery life will be reduced In addition a faulty battery might damage the system Store your notebook Tablet PC in a cool dry location Temperatures should remain between 13 F 25 C and 140 F 60 C Traveling with your LifeBook Do not transport your system while it is turned on Do not check your system as baggage Carry it with you When traveling with the hard drive removed wrap the drive in a non conducting materials cloth or paper If you have the drive checked by hand be ready to install the drive if needed Never put your hard drive through a metal detector Have your hard drive hand inspected by security personnel You can however put your hard drive through a properly tuned X ray machine Take the necessary plug adapters if you re traveling overseas Check the following diagram to determine which adapter you ll need or ask your travel agent 65 y Lifebook P S
133. oomm m 42 Configuration Label o ooooooocomcmmo o 13 Conventions used oocoooococcoccconccconccco coo 3 CULO Ny seele 18 D DE in connector vag cave ddr os ee 8 DG Power Jack imeni iaei us cated ba es 11 29 Device Ports aia ae rn 46 DIMM anta ANRA NS 39 Display Panel 3 354 5 4 ur isos Dro Arpo es 9 brishtness area aan re oe 17 l atchr a en ad ca 9 OPENING iii ss idas 16 problems an laa da 56 Display Timeout 00 eee ee eee ee eee 33 Docking Portu sa Bang 46 Drivers and Application Restore CD 60 E Err r Messages vi A de 58 External Monitor Port o oo oooooooo oo 12 47 F PU ed 61 Floppy Disk CA En EN eek ee 66 Fujitsu Driver Update utility 61 Function Key Pla a an Gute ey EIERN ES 19 O ER RA A dae eee oe 19 PA A I EA 19 O een A AE 19 PO rios 19 FF E AA A A da 19 Pida in 19 FO is soe EEE LEHRE 19 EN anreisen 19 Fir uam ee an gee Rennes ede seins 19 H Hard Disk Drive access Indicator us oes cow tae viewer yee 14 problems sn na a a ee nod Sees 52 Hard Disk Timeout 00 000 33 Headphone Jack 0 e cece eee ee 8 10 46 Hibernate Mode eee eee eee eee 33 Hibernation Feature 00 0 008 33 Installing a Memory Stick oooo oooooooo 41 Internal LAN Jack 2 222 cc cos ee cee 46 y Lifebook P Series Notebook Tablet PC K Keyboard nn ee 9 18 CUESOBKOYS a 18 numeric k
134. ot been saved to the hard drive will be lost 37 SS P Series Notebook Tablet PC Once your notebook Tablet PC goes into Dead Battery Suspend mode you will be unable to resume operation until you provide a source of power either from an adapter or a charged battery Once you have provided power you will need to press the Suspend Resume button to resume operation In the Dead Battery Suspend mode your data can be maintained for some time but ifa power source is not provided promptly the Power indicator will stop flashing and go out meaning that you have lost the data that was not stored Once you provide power you can continue to use your system while an adapter is charging the battery REPLACING THE BATTERY Your LifeBook P Series notebook Tablet PC comes with one battery pack you might want to consider purchasing a spare By keeping a spare battery fully charged you can immediately swap with one that is not charged There are two ways to swap batteries cold swapping and hot swapping Cold swapping means swapping batteries when the system has been powered down hot swapping is performed when the system is powered by AC power Cold swapping batteries To cold swap batteries in your battery compartment follow these easy steps Figure 4 1 1 Have a charged battery ready to install 2 Shut down your system and disconnect the AC adapter 3 Lift the display enough to pull the display latch from the slot 4
135. ou can solve by replacing the device The information in this section helps you isolate and resolve some of these straightforward problems and identify failures that require service IDENTIFYING THE PROBLEM If you encounter a problem that you are having diffi culty in solving go through the following procedure before pursuing further troubleshooting 1 Turn off your notebook Tablet PC 2 Make sure the AC adapter is plugged into your system and to an active AC power source 3 Make sure that any card inserted in the PC Card slot is seated properly You can also remove the card from the slot thus eliminating it as a possible cause of failure 4 Make sure that any devices connected to the external connectors are plugged in properly You can also disconnect such devices thus eliminating them as possible causes of failure 5 Turn on your notebook Tablet PC Make sure it has been off at least 10 seconds before you turn it on 6 Go through the boot sequence 7 Ifthe problem has not been resolved refer to the Troubleshooting Table that follows for more detailed troubleshooting information 8 Ifyou still have the problem after taking all of the above approaches please check our support website at http www computers us fujitsu com support for possible known support issues If you keep notes about what you have tried your support representative may be able to help you more quickly by giv ing additional suggestio
136. ou must select grey and green components separately 5 Once you have selected the components you wish to install click Install Selected Subsystems the components will be installed 6 After the components are installed click OK then click Yes when asked if you want to reboot the system RESTORING THE FACTORY IMAGE The Restore Disc that came with your system contains two utilities The Recovery utility allows you to restore the original contents of the C drive The Hard Disk Data Delete utility on this disc is used to delete all data on your hard disk and prevent it from being reused Do not use the Hard Disk Data Delete utility unless you are absolutely certain that you want to erase your entire hard disk including all partitions e The use of this disc requires that you have a device capable of reading CDs attached to your system If you do not have a built in CD player you will need to attach an external player For more information on available external devices visit our website at www shopfujitsu com This disc can only be used with the system with which it was purchased BOOT Priority Change Before restoring an image you must first verify that your system is set up to boot from the CD drive To verify change the boot up priority rather than booting up from the hard drive or an external floppy disk drive perform the following steps 1 Start your system and press the F2 key when the
137. perational A HIBERNATE MODE The Hibernate mode saves the contents of your notebook Tablet PC s system memory to the hard drive as a part of the Suspend Resume mode Your system is pre configured to perform this function The Hibernate mode can also be configured through the system BIOS to run in other ways depending on what you need to accomplish See BIOS Setup Utility on page 30 Standby or Hibernate modes should not be used with certain PC Cards Check your PC Card documentation for more information Disabling the Suspend Resume button prevents it from being used to put your notebook Tablet PC in Standby or Hibernate mode The resume function of the button cannot be disabled If your notebook Tablet PC is actively accessing information when you enter Standby or Hibernate mode changes to open files are not lost The files are left open and memory is kept active during Standby mode or the memory is trans ferred to the hard drive during Hibernate mode When PC Cards or external devices are in use Save to Disk mode cannot return to the exact state prior to suspension because all peripheral devices will be re initialized when the system restarts The main advantage of using Hibernate mode is that power is not required to maintain your data This is very impor tant if you will be leaving your system in a suspended state for a prolonged period of time The drawback of using Hibernate mode is that it
138. propriate connection avail able Ifan automatic connection is not possible you will be advised on how to select and change an available connection at a later date You will then be asked if you want to register with Microsoft If you are not connected to a phone line and plan to register at a later time you may click the Skip button Once you are connected to the Internet you will be asked if you wish to continue with the registration If you select Yes you will then enter your name and Getting Started address and email address if desired Click Next to complete registration REGISTERING YOUR NOTEBOOK TABLET PC How do register my notebook Tablet PC You can register your LifeBook by going to our website http www computers us fujitsu com support You will need to be set up with an Internet Service Provider ISP to register online INSTALLING CLICK ME The first time you boot up your system you will see an icon called Click Me in the Start menu When you click the Click Me icon your system will automatically build the icon tray in the bottom right of the screen These icons provide links to utilities that you will frequently access such as wireless client software from the manu facturer of the wireless device in your system 31 y Lifebook P Series Notebook Tablet PC Power Management Your LifeBook P Series notebook Tablet PC has many options and features for conserving battery power Some of these feature
139. r jack that is also compliant The ringer equivalent number REN of this equipment is 0 1B as shown on the label The REN is used to deter mine the number of devices that may be connected to a telephone line Excessive RENs on a telephone may result in the devices not ringing in response to an Regulatory Information incoming call In most but not all areas the sum of RENs should not exceed five 5 0 To be certain of the number of devices that may be connected to a line as determined by the total RENs contact the local tele phone company Ifthis equipment causes harm to the telephone network the telephone company will notify you in advance that temporary discontinuance of service may be required But if advance notice isn t practical the telephone company will notify the customer as soon as possible Also you will be advised of your right to file a complaint with the FCC if you believe it is necessary The telephone company may make changes in its facili ties equipment operations or procedures that could effect the operation of the equipment If this happens the telephone company will provide advance notice in order for you to make necessary modifications to main tain uninterrupted service If trouble is experienced with this equipment for repair or warranty information please refer to the manual or contact Fujitsu Computer Systems Corporation Customer Service Ifthe equipment is causing harm to the telephone network
140. rd used for protecting wireless data Wi Fi Wi Fi or Wireless Fidelity is a set of standards for wire less local area networks WLAN based on the IEEE 802 11 specifications Certified products can use the offi cial Wi Fi logo which indicates that the product is interoperable with any other product also showing that logo WPA Wi Fi Protected Access Strong replacement for WEP providing improved data encryption and user authentication 97 y Lifebook P Series Notebook Tablet PC IP address information ABOUT IP ADDRESSES IP addressing is much more complicated than can be briefly explained in this i document You are advised to consult with your network administrator for additional information If IP address is unknown set IP address as follows If you have an access point DHCP server on the network set the IP address as follows Obtain an IP address automatically A DHCP server is a server that automatically assigns IP addresses to i computers or other devices in the network There is no DHCP server for the AdHoc network If the IP address is already assigned to the computer in the network ask the network administrator to check the IP address to be set for the computer If no access point is found in the network An IP address is expressed with four values in the range between 1 and 255 Set the each computer as follows The value in paren theses is a subnet mask
141. rder to connect an external device follow these easy steps See figure 2 7 on page 12 for location There is also an external VGA monitor on the port replicator See figure 4 8 on page 44 for location 1 Remove the cover from the port opening if present 2 Align the connector with the port opening 3 4 Tighten the two hold down screws located on Push the connector into the port until it is seated each side of the connector When an external monitor is plugged in pressing the Fn F10 keys allows you to change your selection of where to send your display video Each time you press the key combination you will step to the next choice starting with the built in display panel only moving to the external monitor only finally moving to both the built in display panel and an external monitor When an external monitor is plugged in pressing the LifeBook Application Panel Secondary Function buttons Fn Screen Rotation Button also allows you to change your selection of where to send your display video User Installable Features 47 48 LifeBook P Series Notebook Tablet PC gt Troubleshooting 50 LifeBook P Series Notebook Tablet PC Troubleshooting Your LifeBook P Series notebook Tablet PC is sturdy and subject to few problems in the field However you may encounter simple setup or operating problems that you can solve on the spot or problems with peripheral devices that y
142. re logging into In its secure database OmniPass associates this friendly name with this website Additional Settings for Remembering a Site When OmniPass prompts you to enter a friendly name you also have the opportunity to set how OmniPass authenticates you to this site There are three effective settings for how OmniPass handles a remembered site gt The default setting is Automatically click the OK or Submit button for this password protected site once the user is authenticated With this setting each time you navigate to this site OmniPass will prompt you for your master password or fingerprint authentication device Once you have authenticated with OmniPass you will automatically be logged into the site Less secure is the option to Automatically enter this password protected site when it is activated Do not prompt for authentication Check the upper box to get this setting and each time you navigate to this site OmniPass will log you into the site without prompting you to authenticate This setting is more convenient in that whenever you go to a site remembered with this setting you will bypass any authentication procedure and gain instant access to the site But should you leave your system unattended with your OmniPass user logged in anyone using your system can browse to your password protected sites and gain automatic access If you uncheck both boxes in Settings for this Password Si
143. ring function The procedure for setting the file sharing function follows with the work folder in drive C asan example 1 Click the Start button first and then My Com puter 2 Double click Local disk C 3 Right click the work folder or whichever folder you want to share and then click Sharing and Security in the menu displayed The Folder Name Properties window will be displayed Setting the file sharing function for the file which has been used to execute Network Setup Wizard is suggested on the screen For the wireless LAN however since security is guaranteed by entry of the network name SSID and the network key the steps to be taken to set the file sharing function easily without using Network Setup Wizard are given below GI 4 Click Sharing if it isn t already selected 5 Click the link stating If you understand the secu rity risks but want to share files without running the wizard click here 6 Click Just enable file sharing and click OK 7 Check the Share this folder on the network check box To specify the corresponding folder as a read only folder select the Read only checkbox under the General tab 8 Click the OK button The folder will be set as a sharable folder and the display of the icon for the work folder will change Setting the printer sharing function 1 Click the Start button fir
144. rsists then it is unlikely the problem is due to your Windows user account password changing 109 110 LifeBook P Series Notebook Tablet PC Index A AC adapter sn na 29 dic aaa 14 plug adapters merces karesan tenein ee eee 65 Anti theft Lock Slot oooooooommmmm o 12 Auto Airline Adapter o oooocoooccccnocconm m 29 Automatically Downloading Driver Updates 61 B Batte usa re nr ee 37 alarm fesse hes ou hee DEAN War ana 37 CALE ara ta 66 cold swapping o nre eee e eee eee eee eee 38 compartMent cece cece 13 Conserving POWEL sor eo Poran rora ee eee 32 dead mess sans ron sn ny 54 faulty 4 5 88 Bee ia 55 increasing life cando dadas ds en denen 66 level indicators as ae ee 14 lithium ion battery 22 222222 eee ee 37 low nr Bienen 37 problems ee 54 55 A nike ana 37 replacing an Kanaren 38 shorted na sen ne 38 suspend mode 0 eee e ee eee cence eens 37 battery release latch 0 sees eee eee 8 BIOS guide nasra eu ann 30 setup utlliiy ame true 30 Bluetooth Where to Find Information 100 Boot Sequence leas 30 Built in Microphone 0oooococoorccccccrr eee 13 Button Icons e ieee e eee eee 20 C CapsLock Indicator ooooooccocccocccccoc 15 CD ROM GaTe ca ee ae 67 Changing Button Functions ooooooomoo o 21 ElickMel zn ia aa aa aaa 31 Closed Cover Switch ooooooooocomocmmmm o 9 Compact Flash Card oooooooccconmc
145. s the Domain may not be your Windows computer name Click Next to continue 3 In this step OmniPass captures your fingerprint Refer to Enrolling a Fingerprint on page 105 for additional information 4 Next choose how OmniPass notifies you of various events We recommend you keep Taskbar Tips on Beginner mode taskbar tips and Audio Tips on at least Prompt with system beeps only until you get accustomed to how OmniPass operates Click Next to proceed with user enrollment You will then see a Congratulations screen indicating your completion of user enrollment 5 Click Done to exit the OmniPass Enrollment Wizard You will be asked if you d like to log in to OmniPass with your newly enrolled user click Yes Enrolling a Fingerprint Enrolling a fingerprint will increase the security of your system and streamline the authentication procedure You enroll fingerprints in the OmniPass Control Center With an OmniPass user logged in double click the system tray OmniPass icon Select the User Settings tab and click Enrollment under the User Settings area Click Enroll Authentication Device and authenticate at the authentication prompt to start device enrollment 1 During initial user enrollment you will be prompted to select the finger you wish to enroll Fingers that have already been enrolled will be marked by a green check The finger you select to enroll at this time will be marked by a red arrow OmniPass will allo
146. s are automatic and need no user inter vention such as those for the internal modem However others depend on the parameters you set to best suit your operating conditions such as those for the display brightness Internal power management for your note book Tablet PC may be controlled from settings made in your operating system pre bundled power management application or from settings made in BIOS setup utility Besides the options available for conserving battery power there are also some things that you can do to prevent your system battery from running down as quickly For example you can create an appropriate power saving profile put your system into Standby mode when it is not performing an operation and you can limit the use of high power devices As with all mobile battery powered computers there is a trade off between performance and power savings Power Mode System Activity Events causing system to enter mode state Fully On Mode System is running CPU system bus and all other interfaces operate at full speed From Standby mode System operation resumed Suspend Resume button pressed resume on modem ring resume on time From Hibernation mode Suspend Resume button pressed From Off mode Suspend Resume button pressed Standby Mode Suspend to RAM Resume system logic remains powered and RAM remains powered to maintain active data All other devices are turned off Standby timeou
147. sition and intensity of the beam Data The information a system stores and processes DC Direct current A voltage or current that does not fluctuate periodically with time 77 y Lifebook P Series Notebook Tablet PC Default Value A pre programmed value to be used if you fail to set your own DHCP Dynamic Host Configuration Protocol A protocol used for automatically fetching communica tion parameters such as IP addresses The side which assigns IP address is called DHCP server and the side that is assigned it is called DHCP client DIMM Dual in line memory module Disk A spinning platter of magnetic data storage media If the platter is very stiff it is a hard drive if it is highly flexible it is a floppy disk if it is a floppy disk in a hard housing with a shutter it is commonly called a diskette Disk Drive The hardware which spins the disk and has the heads and control circuitry for reading and writing the data on the disk Diskette A floppy disk in a hard housing with a shutter DMA Direct Memory Access Special circuitry for memory to memory transfers of data which do not require CPU action DMI Desktop Management Interface A standard that provides PC management applications with a common method of locally or remotely querying and configuring PC computer systems hardware and software components and peripherals DNS Domain Name System A function that controls the correspondence of IP
148. sswords users and multiple identities for each user GETTING STARTED This section guides you through the preparation of your system for the OmniPass fingerprint recognition application You will be led through the OmniPass installation process You will also be led through the procedure of enrolling your first user into OmniPass Fingerprint Sensor User s Guide INSTALLING OMNIPASS If OmniPass has already been installed on your system skip this section and go directly to User Enrollment on page 104 You can determine whether OmniPass has already been installed by checking to see if the following are present The presence of the gold key shaped OmniPass icon in the system tray at the bottom right of the screen The presence of the Softex program group in the Programs group of the Start menu System Requirements The OmniPass application requires space on your hard drive it also requires specific Operating Systems SO s The minimum requirements are as follows Windows XP Home Edition Windows XP Profes sional or Windows 2000 operating system Atleast 35 MB available hard disk space Installing the OmniPass Application If OmniPass is already installed on your system go to User Enrollment on page 104 Otherwise continue with this section on software installation Li To install OmniPass on your system you must For installation OmniPass requires that the user installing OmniPass have admini
149. st and then Printers and FAX A list of connected printers will be displayed 2 Right click the printer for which the sharing func tion is to be set and then click Sharing in the menu displayed The property window correspond ing to the selected printer will be displayed Setting the printer sharing function when Network Setup Wizard has been executed is suggested on the screen For the wireless LAN however since security is guaranteed i by entry of the network name SSID and the network key the steps to be taken to set the printer sharing function without using Network Setup Wizard are laid down below 3 Click the Sharing tab 4 Click Share this printer 5 Enter the sharing printer name in Share name 6 Click the OK button Confirming connection After you have finished the network setup operations access the folder whose sharing has been set for other personal computers Also confirm the status of the radio waves in case of trouble such as a network connec tion failure In the case of access point infrastructure connection enter the necessary data for the access point before confirming connection Refer to the manual of the access point for the access point setup procedure Wireless LAN User s Guide Connecting your personal computer to another personal computer 1 Click Start first and then My Computer The My Computer window will be displayed in
150. strative privileges to the system If your current user does not have administrative privileges log out and then log in with an administrator user before proceeding with OmniPass installation 1 Insert the installation media for the OmniPass appli cation into the appropriate drive If you are installing from CD ROM or DVD ROM you must find and launch the OmniPass installation program setup exe from the media 2 Follow the directions provided in the OmniPass installation program Specify a location to which you would like OmniPass installed It is recom mended that you NOT install OmniPass in the root directory e g C 3 Once OmniPass has completed installation you will be prompted to restart you system Once your system has rebooted you will be able to use OmniPass If you choose not to restart immediately after installation OmniPass will not be available for use until the next reboot The installation program automatically places an icon Softex OmniPass in the Windows Control Panel as well as a golden key shaped icon in the taskbar 103 SS P Series Notebook Tablet PC Verifying Information about OmniPass After you have completed installing OmniPass and restarted your system you may wish to check the version of OmniPass on your system To check the version information of OmniPass 1 From the Windows Desktop double click the key shaped OmniPass icon in the taskbar usually located in the lower right
151. t occurs Suspend request issued by software or by pressing the Suspend Resume button Low battery Hibernation Mode Suspend to Disk Windows saves desktop state including open files and documents to hard disk CPU stops All other devices are turned off Suspend timeout occurs Clicking Start gt Shut Down gt Hibernate It may be necessary to Enable Hibernate Support from Windows Power Options Low battery condition Power Off System is fully powered off except for logic components required for Suspend Resume button and real time clock operation System shutdown Low battery condition Table 3 1 System Power States SUSPEND RESUME BUTTON When your notebook Tablet PC is active the Suspend Resume button can be used to manually put your system into Standby mode Push the Suspend Resume button when your notebook Tablet PC is active but not actively accessing anything and immediately release the button You will hear two short beeps and your system will enter Standby mode See figure 2 6 on page 11 for location If your notebook Tablet PC is suspended pushing the Suspend Resume button will return your system to active operation You can tell whether or not your system is in Standby mode by looking at the Power indi cator See on page 14 If the indicator is visible and not flashing your system is fully operational If the indicator is both visible and flashing your sys
152. tach it from your system Figure 4 11 Figure 4 11 Removing the Port Replicator 45 y Lifebook P Series Notebook Tablet PC Device Ports Your LifeBook P Series notebook Tablet PC and the optional Port Replicator come equipped with multiple Device Ports to which you can connect an external device including disk drives keyboards modems printers etc MODEM RJ 11 JACK The modem RJ 11 jack is used for an internal modem To connect the telephone cable follow these easy steps See figure 2 7 on page 12 for location 1 Align the connector with the jack opening 2 Push the connector into the jack until it is seated 3 Plug the other end of the telephone cable into a telephone outlet The internal modem is not intended for use with Digital PBX systems Do not connect the internal modem to a Digital PBX as it may cause serious damage to the internal modem or your entire LifeBook P Series notebook Tablet PC Consult your PBX manufacturer s documentation for details Some hotels have Digital PBX systems Be sure to find out BEFORE you connect your modem IN The internal modem is designed to the ITU V 90 standard Its maximum speed of 53000 bps is the highest allowed by FCC and its actual connection rate depends on the line conditions The maximum speed is 33600 bps at upload The internal modem on all LifeBook P Series notebook Tablet PC s from Fujitsu Computer Systems Corporation are certified for
153. tact your network administrator if configuration of this setting is required 20 Select the appropriate Authentication Type Please contact your network administrator if configura tion of this setting is required 21 After selecting your authentication type enter the user name domain and password of the user you have created on the authentication server The user name and password do not have to be the same as name and password of your current Windows user login 22 Click OK to save the settings 23 From the Intel ProSet Wireless page click the new profile name shown in the Profile List Use the up and down arrows to position the priority of the new profile in the priority list 24 Click the Connect button to connect to the net work 25 Click Close if you want to close the Intel R PROSet for Wireless window CONFIGURATION USING ATHEROS CLIENT UTILITY SOFTWARE This section explains the procedure to properly configure the WLAN device using the Atheros Client Utility Pre defined parameters will be required for this procedure Please consult with your network adminis trator for these parameters Network Name Also known as the SSID Network Key WEP Required if using static WEP keys Authentication Type Open Shared WPA or WPA PSK Procedure 1 Activate the WLAN device using either the Wire less On Off Switch or the Atheros Client Utility 2 Right click on the Atheros Client Utility i
154. te OmniPass will prompt you for your master pass word or fingerprint authentication device Once you have authenticated with OmniPass your credentials will be filled in to the site login prompt but you will have to click the website OK Submit or Login button to gain access to the site 106 Click Finish to complete the remember password proce dure The site location the credentials to access the site and the OmniPass authentication settings for the site are now stored in the OmniPass secure database The OmniPass authentication settings Settings for this Pass word Site can always be changed in Vault Management Logging in to a Remembered Site Whether or not OmniPass prompts you to authenticate when you return to a remembered site is determined by Settings for this Password Site and can be changed in Vault Management The following cases are applicable to using OmniPass to login to Windows remembered websites and all other password protected resources With Master Password Once you return to a site you have remembered with OmniPass you may be presented with a master pass word prompt Enter your master password and you will be allowed into the site Logging into Windows with a Fingerprint Device When logging into Windows with a fingerprint device the fingerprint capture window will now appear next to the Windows Login screen Place your enrolled fingertip on the sensor to authenticate You will be simultaneously
155. tem is in Standby mode If the indicator is not visible at all the power is off or your system is in Hibernate mode See Hibernate Mode 32 STANDBY MODE Standby mode in Windows saves the contents of your notebook Tablet PC s system memory during periods of inactivity by maintaining power to critical parts This mode will turn off the CPU the display the hard drive and all of the other internal components except those necessary to maintain system memory and allow for restarting Your system can be put in Standby mode by Pressing the Suspend Resume button when your system is turned on Selecting Standby from the Windows Shut Down menu Timing out from lack of activity Allowing the battery to reach the Dead Battery Warning condition Closing the system cover Your notebook Tablet PC s system memory typically stores the file s on which you are working open appli cation s information and any other data required to support the operation s in progress When you resume operation from Standby mode your system will return to the point where it left off To resume operation you must use the Suspend Resume button to resume opera tion and there must be an adequate power source avail able or your system will not resume If you are running your notebook Tablet PC on battery power be aware that the battery continues to discharge while your system is in Standby mode though not as fast as when fully o
156. ter until the battery is charged The AC or auto airline adapter is not plugged in properly Verify that your adapter is connected correctly See Power Sources on page 29 The Power adapter AC or auto airline is faulty Try a different Power adapter or install a charged optional second battery The Power adapter AC or auto airline has no power from the AC outlet airplane seat jack or the car s cigarette lighter Move the AC cord to a different outlet check for a line switch or tripped circuit breaker for the AC outlet If you are using an auto airline adapter in a car make sure the ignition switch is in the On or Accessories position Your notebook Tablet PC turns off all by itself The power management param eters are set for auto timeouts which are too short for your operating needs Press any button on the keyboard or move the mouse to restore operation If that fails push the Suspend Resume button Check your power management settings or close your applications and go to the Power Savings menu of the setup utility to adjust the timeout values to better suit your operation needs You are operating on battery power only and have ignored a low battery alarm until the battery is at the dead battery state and your machine has gone into Dead Battery Suspend mode Install a power adapter and then push the Suspend Resume button See Power Sources on page 29 You have a b
157. tes successfully tested by the Power On Self Test This can only appear if you have an SRAM PC Card installed Extended RAM Failed at offset nnnn Extended memory not working or not configured prop erly If you have an installed memory upgrade module verify that the module is properly installed If it is prop erly installed you may want to check your Windows Setup to be sure it is not using unavailable memory until you can contact your support representative nnnn Extended RAM Passed Where nnnn is the amount of memory in kilobytes successfully tested Failing Bits nnnn The hex number nnnn This is a map of the bits at the memory address in System Extended or Shadow memory which failed the memory test Each 1 one in the map indicates a failed bit This is a serious fault that may cause you to lose data if you continue Contact your support representative Fixed Disk x Failure or Fixed Disk Controller Failure where x 1 4 The fixed disk is not working or not configured properly This may mean that the hard drive type identified in your setup utility does not agree with the type detected by the Power On Self Test Run the setup utility to check for the hard drive type settings and correct them if necessary If the settings are OK and the message appears when you restart the system there may be a serious fault which might cause you to lose data if you continue Contact your support representative Invalid NVRAM media
158. th 1 See your SD Card manual for instructions on the insertion of your card Some cards may require that your system is off while inserting them 2 Make sure there is no card currently in the slot If there is see Removing an SD Card 3 Insert your card into the slot with the product label facing up 4 Push the card firmly into the slot until it is seated in the connector REMOVING AN SD CARD To remove an SD Card first see your SD Card manual for instructions Some cards may require your LifeBook notebook Tablet PC to be in Suspend Mode or Off while removing them To remove the card from the slot simply pull it out 41 SS P Series Notebook Tablet PC Compact Flash Card Slot Compact Flash Card Compact Flash Card Eject Button Figure 4 6 Compact Flash Card Slot Compact Flash Cards Your Fujitsu LifeBook notebook Tablet PC supports Compact Flash CF cards which can perform a variety of functions Some available Compact Flash Cards Memory cards Fax data modem cards Local area network LAN cards For further information refer to the instructions supplied with your CF Card INSERTING COMPACT FLASH CARDS Compact Flash Cards are inserted in the Compact Flash Card slot To insert a Compact Flash Card follow these steps Figure 4 6 Inserting or removing a Compact Flash Card during your LifeBook notebook Tablet PC s shutdown or bootup process may damage the card and or yo
159. the Memory Compartment Cover The memory upgrade module is not something you routinely remove from your notebook Tablet PC Once it is installed you should leave it in place unless you want to change system memory capacity REMOVING A MEMORY UPGRADE MODULE 1 Perform steps 1 through 4 of Installing a Memory Upgrade Module 2 Pull the clips sideways away from each side of the memory upgrade module at the same time 3 While holding the clips out remove the module from the slot by lifting it up and pulling towards the rear of your notebook Tablet PC 4 Store the memory upgrade module in a static guarded sleeve 5 Replace the cover Figure 4 4 6 Replace the screws 39 y Lifebook P Series Notebook Tablet PC CHECKING THE MEMORY CAPACITY Once you have changed the system memory capacity by either adding or removing a memory upgrade module be sure to check that your system has recognized the change Your notebook Tablet PC uses Dynamic i Video Memory Technology DVMT which allows the video driver to dynamically determine the amount of memory that is used Your system can use a maximum of 128 MB of system memory for video functions You can check the memory capacity by clicking Start gt Control Panel then double clicking the System icon Select the General tab and check the amount of memory under Computer The amount of memory displayed should be approxi mately th
160. the button will scroll the screen down one frame This allows you to navigate quickly through large documents When you press the Fn button while you press then release the Page Down Application A button you will automatically start whichever program is assigned to the button The default application for this button is Calcu lator See Changing Button Functions on page 21 to select a different application for this button Page Up Application B Button When you press the Page Up button when the system is running each press of the button will scroll the screen up one frame This allows you to navigate quickly through large documents When you press the Fn button while you press then release the Page Up Application A button you will automatically start whichever program is assigned to the button The default application for this button is WordPad Windows XP Professional or MS Journal Windows XP Tablet PC Edition See Changing Button Functions on page 21 to select a different application for this button Screen Rotation VGA Out Button The screen rotation feature would normally be used only when the system is configured as a tablet When you would like to use the tablet as an eBook for example you would use the portrait orientation when accessing spreadsheets or using the system as a note book you would more typically use landscape orienta tion When the system is changed to tablet configuration th
161. tings In the Pen Options tab select Press and Hold then click the Settings button Double Clicking To double click touch the item twice and then immedi ately remove the stylus tip You also have the option to perform the double click operation by tapping lightly with your finger on the Touch Screen twice Figure 2 24 24 Double clicking the Touch Screen N Figure 23 y Lifebook P Series Notebook Tablet PC Dragging Dragging means moving an item with the stylus by touching the screen moving and then lifting the stylus To drag touch the Touch Screen with your stylus on the item you wish to move While continuing to touch the screen with the stylus drag the item to its new location by moving the stylus across the screen and then lifting the stylus to release it Dragging can also be done using your fingertip Figure 2 25 fo Calibrating the Touch Screen In order to ensure accurate tracking between the stylus and cursor you must run the Touch Screen Calibration Utility before you use the Touch Screen for the first time or after you change the display resolution and or orien tation To run the calibration utility 1 Go to Start gt Control Panel If you are not in Classic View select Switch to Classic View in the left panel 2 Windows XP Professional Double click the Touch Panel icon and select the Calibration tab
162. ton 4 Enter Button Figure 2 17 LifeBook P Series notebook Tablet PC application buttons LifeBook Application Panel A unique feature of your LifeBook P Series notebook Tablet PC is the application panel buttons These buttons allow you to launch specific applications with the touch of a button The five application buttons are located on the bottom left hand side of the display when it is configured to be used as a notebook Figure 2 17 All five of the buttons have primary functions Four of the buttons have secondary functions when used as application buttons The secondary functions are acti vated by pressing the Function Fn button while pressing the application button See Table 2 2 for specific functions The secondary functions of the Application A and B buttons can be changed to launch any application See Changing Button Functions on page 21 Button Icon Primary Function Secondary Function Fn Button Bage Down User defined Application A IBe SS Default Calculator User Defined Application B 4 Page Up Windows XP Professional Default WordPad Windows XP Tablet PC Edition Default MS Journal Screen Rotation 4 VGA Out Secondary Function Selection Fn Fujitsu Menu Utility Ctl Alt Del Button GD None Table 2 2 Application Button Functions Page Down Application A Button When you press the Page Down button when the system is running each press of
163. type Problem with NVRAM access In the unlikely case that you see this message you may have some display prob lems You can continue operating but should contact your support representative for more information 58 Keyboard controller error The keyboard controller test failed You may have to replace your keyboard or keyboard controller but may be able to use an external keyboard until then Contact your support representative Keyboard error Keyboard not working You may have to replace your keyboard or keyboard controller but may be able to use an external keyboard until then Contact your support representative Keyboard error nn BIOS discovered a stuck key and displays the scan code for the stuck key You may have to replace your keyboard but may be able to use an external keyboard until then Contact your support representative Operating system not found Operating system cannot be located on either drive A or drive C Enter the setup utility and see if both the fixed disk and drive A are properly identified and that the boot sequence is set correctly Unless you have changed your installation greatly the operating system should be on drive C If the setup utility is correctly set your hard drive may be corrupted and your system may have to be re installed from your back up media Parity Check 1 nnnn Parity error found in the system bus BIOS attempts to locate the address and display it on the screen If it
164. uired to prop erly setup and configure the integrated Wireless LAN Mini PCI device referred to as WLAN device in the rest of the manual Before using the WLAN device read this manual carefully to ensure it s correct operation Keep this manual in a safe place for future reference Wireless LAN Devices Covered by this Document This document is applicable to systems containing one of the following two devices Most of the procedures are identical Sections that differ between the three devices have been noted in the text Intel PRO Wireless 2915ABG WM3B2915ABG Network Connections 802 11a b g Atheros AR5002X WLL4070 Mini PCI wireless network card 802 11a b g Characteristics of the WLAN Device The WLAN device is a Mini PCI card attached to the main board of the mobile computer The WLAN devices operate in license free RF bands therefore eliminating the need to procure an FCC license to operate Both WLAN devices operate in the 2 4GHz Industrial Scientific and Medical ISM RF band and the lower and middle bands of the 5GHz Unlicensed National Information Infrastructure UNII bands The Intel PRO Wireless 2915ABG and Atheros AR5002X WLAN devices are capable of three operat ing modes IEEE 802 11a IEEE 802 11b and IEEE 802 1 1g Figure A 1 Ad Hoc Mode Network 86 Encoding of data is modulated using Direct Sequence Spread Spectrum DSSS and Complementary Code Keying CCK when the WLAN device
165. unselected methods are not When you click the icon for an unse lected authentication method the authentication prompt associated with that method is displayed When prompted to authenticate you must supply the appropriate credentials an enrolled finger for the finger print capture window or your master password for the master password prompt the key icon Remembering a Password OmniPass can remember any application GUI or pass word protected resource that has a password prompt Using the following procedure you can store a set of credentials into OmniPass These credentials will then be linked to your master password or fingerprint 105 SS P Series Notebook Tablet PC Go to a site that requires a login username and pass word but do not log in yet At the site login prompt enter your username and password in the prompted fields but do not enter the site do not hit Enter Submit OK or Login Right click the OmniPass system tray icon and select Remember Password from the submenu The Windows arrow cursor will change to a golden key OmniPass cursor Click this OmniPass cursor in the login prompt area but do not click the Login or Submit button Associating a Friendly Name After clicking the OmniPass key cursor near the login prompt OmniPass will prompt you to enter a friendly name for this site You should enter something that reminds you of the website the company or the service you a
166. ur sys tem Do not insert a Compact Flash Card into a slot if there is water or any other sub stance on the card as you may perma nently damage the card your LifeBook notebook Tablet PC or both 1 See your Compact Flash Card manual for specific instructions on the insertion of your card Some Compact Flash Cards may require your notebook Tablet PC to be Off while inserting them 2 When you receive your LifeBook there will be a protective plug inserted in the slot Whenever you don t have a Compact Flash Card inserted be sure to replace the plug to prevent system contamination To remove the plug press the Compact Flash Card eject button Figure 4 7 42 Compact Flash Card Eject Button Compact Flash Slot Plug Figure 4 7 Removing Compact Flash Slot plug 3 When the Compact Flash Slot plug is ejected remove it from the slot Insert your Compact Flash Card into the slot with the product label facing up Push the card into the slot firmly until it is seated in the opening You will hear a click and the Eject button will pop away from your notebook Tablet PC User Installable Features REMOVING COMPACT FLASH CARDS To remove a Compact Flash Card follow these easy steps Windows has a shutdown procedure for Compact Flash Cards that must be fol A lowed before removing a card Please review your operating system manual for the correct procedure 1 See
167. us or your finger Excessive force could result in damage to the LCD and or Touch Screen A You can use the stylus to click double click drag items and icons or to draw like a pen or pencil in applications that support this behavior such as drawing or painting programs See the documentation that came with your application for details Figure 2 22 Figure 2 22 Using the Stylus with the Touch Screen To avoid potential scratching and damage never use anything but the included stylus or your finger with the Touch Screen To purchase additional or replacement styluses visit Fujitsu s accessories website at www shopfujitsu com A Li Getting to Know Your LifeBook Clicking To left click touch the object you wish to select and then lift the stylus tip immediately You also have the option to perform the left click operation by tapping lightly with your finger on the Touch Screen once Figure 2 23 Right Clicking Windows XP Professional To right click go to Start gt Control Panel gt Touch Panel From the Right Button Simulation tab you can specify a right button tool by using the selected button prior to the desired right mouse click Windows XP Tablet PC Edition Right click can be accomplished by holding the pen down until a circular icon appears To change the settings for the right click feature go to Start gt Control Panel gt Tablet and Pen Set
168. ver enrolled into OmniPass upon login no one will be logged on to OmniPass This setting is appropriate for an office setting or any setting where users must enter a username and password to log into a computer This is the default setting With the second option Manually log on to OmniPass at startup OmniPass will prompt you to login once you have logged on to Windows With the third option Do not log on to OmniPass at startup OmniPass will not prompt for a user to be logged on You can manually log on to OmniPass by right clicking the OmniPass taskbar icon and clicking Log in User from the right click menu TROUBLESHOOTING You cannot use OmniPass to create Windows users You must first create the Windows user and you will need administrative privileges to do that Once the Windows user is created you can add that user to OmniPass using the same username and password Cannot add Windows users to OmniPass If you experience difficulties adding a Windows user to OmniPass you may need to adjust your local secu rity settings You can do this by going to Start Control Panel Administrative Tools and Local Security Settings Expand Local Policies expand Security Options and double click Network Access Sharing and Security Model for Local Accounts The Fingerprint Sensor User s Guide correct setting should be Classic Local Users Authen ticate as Themselves Cannot add a User with a Blank Password to OmniPass If you exp
169. ver store a floppy disk near a magnet or magnetic field Do not use a pencil or an eraser on a disk or disk label Avoid storing the floppy disks in extremely hot or cold locations or in locations subject to severe temperature changes Store at temperatures between 50 F 10 C and 125 F 52 C Do not touch the exposed part of the disk behind the metal shutter Caring for your Optional Floppy Disk Drive To clean wipe the floppy disk drive clean with a dry soft cloth or with a soft cloth dampened with water or a solution of neutral detergent Never use benzene paint thinner or other volatile material Avoid storing the floppy disk drive in extremely hot or cold locations or in locations subject to severe temperature changes Store at temperatures between 50 F 10 C and 125 F 52 C Keep the floppy disk drive out of direct sunlight and away from heating equipment Avoid storing the floppy disk drive in locations subject to shock and vibration Never use the floppy disk drive with any liquid metal or other foreign matter inside the drive or disk Never disassemble or dismantle your floppy disk drive Care and Maintenance OPTIONAL OPTICAL DRIVE AND DISCS Caring for your Optional Optical Drive Caring for your discs Your optical drive is durable but you must treat it with CDs and DVD discs are precision devices and will func care Please pay attention to the following points hott reliably
170. w RAM in kilobytes successfully tested System battery is dead Replace and run SETUP The BIOS CMOS RAM memory hold up battery is dead This is part of your BIOS and is a board mounted battery which requires a support representative to change You can continue operating but you will have to use setup utility default values or reconfigure your setup utility every time you turn off your notebook Tablet PC System BIOS shadowed System BIOS copied to shadow RAM System CMOS checksum bad run SETUP BIOS CMOS RAM has been corrupted or modified incorrectly perhaps by an application program that changes data stored in BIOS memory Run Setup and reconfigure the system System RAM Failed at offset nnnn System memory failed at offset nnnn of in the 64k block at which the error was detected This means that there is a fault in your built in memory Ifyou continue to operate you risk corrupting your data Contact your support representative for repairs nnnn System RAM Passed Where nnnn is the amount of system memory in kilobytes successfully tested System timer error The timer test failed The main clock that operates the computer is faulty Requires repair of system board Contact your support representative for repairs UMB upper limit segment address nnnn Displays the address of the upper limit of Upper Memory Blocks indicating released segments of the BIOS memory which may be reclaimed by a virtual memory manager Vi
171. w you re enroll a finger If you choose a finger that has already been enrolled and continue enrollment OmniPass will enroll the fingerprint overwriting the old fingerprint Select a finger to enroll and click Next 2 Itis now time for OmniPass to capture your selected fingerprint It may take a several capture attempts before OmniPass acquires your fingerprint Should OmniPass fail to acquire your fingerprint or if the capture screen times out click Back to restart the fingerprint enrollment process Your system has a swipe fingerprint sensor A swipe sensor is small and resembles a skinny elon gated rectangle To capture a fingerprint gently swipe or pull your fingertip over the sensor starting at the second knuckle towards yourself Swiping too fast or too slow will result in a failed capture The Choose Finger screen has a Practice button click it to practice capturing your fingerprint When you are comfortable with how your fingerprint is captured proceed to enroll a finger Fingerprint Sensor User s Guide 3 Once OmniPass has successfully acquired the finger print the Verify Fingerprint screen will automati cally appear To verify your enrolled fingerprint place your fingertip on the sensor and hold it there as if you were having a fingerprint captured Successful fingerprint verification will show a green fingerprint in the capture window and the text Veri fication Successful under the capture window
172. wer time life for its size and is not subject to the memory effect as Nickel Cadmium batteries LPT Port Line Printer Port A way of referring to parallel interface ports because historically line printers were the first and latter the most common device connected to parallel ports MAC Address Media Access Control Address A unique physical address of a network card For Ethernet the first three bytes are used as the vendor code controlled and assigned by IEEE The remaining three bytes are controlled by each vendor preventing overlap therefore every Ethernet card is given a unique physical address in the world being assigned with a different address from other cards For Ethernet frames are sent and received based on this address MB Megabyte Megahertz 1 000 000 cycles per second Memory A repository for data and applications which is readily accessible to your notebook Tablet PC s CPU MHz Megahertz 79 MS P Series Notebook Tablet PC MIDI Musical Instrument Digital Interface A standard communication protocol for exchange of information between computers and sound producers such as synthesizers Modem A contraction for MOdulator DEModulator The equipment which connects a computer or other data terminal to a communication line Monaural A system using one channel to process sound from all sources MPU 401 A standard for MIDI interfaces and connectors MTU Maximum Transmission Unit
173. xported user They are the credentials that had to be submitted when the user profile was exported You will need User Name Password and Domain Ifyou don t remember the value for Domain in aPC or SOHO environment Domain should be your computer name You cannot import a user into OmniPass if there already is a user with the same name enrolled in OmniPass OmniPass will notify you ifthe user was successfully imported Things to Know Regarding Import Export Assume you export a local Windows User profile from OmniPass You want to import that profile to another machine that has OmniPass Before you can import the profile a Windows user with the same login cre dentials must be created on the machine importing the profile Example I have a Windows user with the username Tom and the password Sunshine on my system I have enrolled Tom into OmniPass and remembered passwords I want to take all my passwords to new sys tem I export Tom s OmniPass user profile I go to my new system and using the Control Panel I create a user with the username Tom and the password Sun shine I can now successfully import the OmniPass user data to the new system 108 If you export an OmniPass only user you can import that user to any computer running OmniPass pro vided that a user with that name is not already enrolled in OmniPass If you attempt to import a user profile who has the same name as a user a
174. y lock slot 222 222002 see eenee een 8 Shut Downi s 293i 42 4 4 02 Ken sc kam 28 34 Specifications nn nina in nn 71 Standby Mode mn void eeedes eed eee Os 33 status indicators 1 cece cee cece ees 9 14 Suspend Mode 0 cece eee eee eee 32 Suspend Resume Button 8 9 32 T Tablet PC Buttons 0 cece eee ee 20 EOUCHYSCHEEN tail aaa 23 calibrating ans san anne ser 24 clicks dl art 23 double clicking oooooooococommcromm 23 drassine a a 24 Touchpad Pointing Device 9 24 Troubleshooting 0 e eee see eee ee eee 51 battery cedo 54 55 built in Speakers 0 0 0 eee eee eee 52 hard drive iii is tae aw ds 52 INEM OLY a nia res 53 mouse keyboard oooooocococccccccnccocco 52 port replicator oooooooooooocrccrrroooo 52 A nr ua 53 54 POWER ne esse 54 VILEO m RT 56 U Universal Serial Bus Port o oooooooooooooo 46 US Biar a an enge gina 46 Problems sti da 53 54 USB 2 0 POLS re Mewes 12 USB port m aa a aaa 8 Using the system as a Tablet 16 V volume control 0ooooooocccoocoorocncccor o 25 W Windows keyser coeta re ta eee dings EA 18 Application key iscir GE r aE aa E EN 18 Startkeyrs ss oss a2 aa ans 18 Wireless LAN access point infrastructure mode 87 activating the WLAN device 22222220 gt 88 ad hoc mode user 86 before using the wireless LAN
175. your LifeBook P Series notebook Tablet PC from its off state Once you have connected your AC adapter or charged the internal Lithium ion battery you can power on your notebook Tablet PC See figure 2 4 on page 9 for loca tion When you turn on your notebook Tablet PC be sure you have a power source This means that a battery is installed and charged or that a power adapter is connected and has power Li Press the Suspend Resume button to start your system When you are done working you can either leave your system in Standby mode See Standby Mode on page 32 or you can turn it off See Power Off on page 34 When the system display is closed the Suspend Resume button is disabled This feature prevents the system from being accidentally powered up when not in use Li When you Power On your system it will perform a Power On Self Test POST to check the internal parts and configuration for correct functionality Ifa fault is found your system will emit an audio warning and or an error message will be displayed See Power On Self Test Messages on page 58 Depending on the nature of the problem you may be able to continue by starting the operating system or by entering the BIOS setup utility and revising the settings After satisfactory completion of the Power On Self Test POST your notebook Tablet PC will load your oper ating system Never turn off your notebook Ta
176. zed modification will void the equipment authorization from the FCC and Industry Canada and the warranty 100 Appendix B Using the Fingerprint Swipe Sensor LifeBook P Series Notebook Tablet PC 102 Fingerprint Sensor Device INTRODUCING THE FINGERPRINT SENSOR DEVICE Your system has a fingerprint sensor device in the loca tion shown in the figure below WM ir Figure B 1 Fingerprint sensor With a fingerprint sensor you can avoid having to enter a username and password every time you want to Log onto Windows Recover from suspend mode Cancel a password protected screen saver Log into homepages that require a username and pass word After you have enrolled or registered your finger print you can simply swipe your fingertip over the sensor for the system recognize you The fingerprint sensor uses Softex OmniPass which provides password management capabilities to Microsoft Windows operating systems OmniPass enables you to use a master password for all Windows applications and on line passwords OmniPass requires users to authenticate themselves using the fingerprint sensor before granting access to the Windows desktop This device results in a secure authentication system for restricting access to your computer applications websites and other password protected resources OmniPass presents a convenient graphical user interface through which you can securely manage pa

P1510D User`s Guide

Contents

Download Pdf Manuals

Related Search

Related Contents