Z30 DMX-512 LED CONTROLLER User Manual Ver 1.0 eng
Contents
1. a Z30 LED Controller LED UNITS WIRING CONNECTION 03 LA 072 RJ12 OUTPUT J L SIT SI 6 pin Female RJ12 IMPORTANT The maximum number of MR16 FOCUS FULL COLOUR LED lamps DIVE3 FULL COLOUR DIVE9 RGB connectable to each 230 LEDs output is 1 pcs Never plug in a new unit when the power supply is turned on DIVE3 FULL COLOUR R DIVE9 RGB R DIVE9 RGB a Z30 LED Controller LED UNITS WIRING CONNECTION 03 LA 072 RJ12 OUTPUT J L SIT SI 6 pin Female RJ12 2X LED s output 2 X LED s output DIVE6 FULL COLOUR R DIVE18 RGB R 2 X LED s output 2 A 3 as gt 2 X LED s output DIVE6 FULL COLOUR DIVE18 RGB IMPORTANT DIVE6 FULL COLOUR and DIVE 18 RGB unit are provided with 2 separeted LED s input lines DIVE6 FULL COLOUR and DIVE 18 RGB unit need 2 x Z30 LED s output each Never plug in a new unit when the power supply is turned on A Z30 LED Controller LED UNITS WIRING CONNECTION 03 LA 077 PLUG IN OUTPUT THA MM i i i Lao e gg Il Y E Ll Ug J3 Um J a situa ST ER sabas i il a ll ri E ae LEDs OUT SU 1 PIN 6 Xx e LEDS OUT 2 on IMPORTANT The maximum number of MR16 FOCUS RGB LED lamps connectable to each 230 LEDs output is 3 pcs Ne2. Made in Italy E 730 LED Controller Le informazioni contenute in questo documento sono state attentamente redatte e controllate Tuttavia non assunta alcuna responsabilit per eventuali inesattezze Tutti diritti sono riservati e questo documento non pu essere copiato fotocopiato riprodotto per intero o in parte senza previo consenso scritto della D T S DTS si riserva il diritto di apportare senza preavviso cambiamenti e modifiche estetiche funzionali o di design a ciascun proprio prodotto D T S non assume alcuna responsabilit sull uso o sull applicazione dei prodotti o dei circuiti descritti The information contained in this publication has been carefully prepared and checked However no responsibility will be taken for any errors All rights are reserved and this document cannot be copied photocopied or reproduced in part or completely without prior written consent from D T S D T S reserves the right to make any aesthetic functional or design modifications to any of its products without prior notice D T S assumes no responsibility for the use or application of the products or circuits described herein Les informations contenues dans le pr sent manuel ont t r dig es et contr l es avec le plus grand soin Nous d clinons toutefois toute responsabilit en cas d ventuelles inexactitudes Tous droits r serv s Ce document ne peut tre copi photocopi ou reproduit dans sa totalit ou partiellement
3. Menu Up Down LED Setup Hardware test LED min setting LED max setting MR16 full color Output filter output delay PWM Frequency PWM frequency value This menu allow to adjust the PWM frequency value Hz in order to reduce flickering in the process of your camera recordings ENTER Up Down gt HARDWARE TEST di Hardware test OFF default Hardware test ON gt LED MIN SETUP a MIN level RED MIN level GREEN MIn level BLUE IS LED MAX SETUP ENTER MAX level RED MAX level GREEN MAX level BLUE IF MR16 FULL COLOUR ENTER MR16 limit OFF Default MR16 limit ON IF OUTPUT FILTER ENTER Output filter OFF Output filter ON Default OUTPUT DELAY No output delay ENTER Short delay default Long delay PWM frequency 490HZ 1000Hz default 2000Hz 3000Hz 4000Hz 5000Hz 6000Hz 7000Hz 8000Hz 9000Hz 10000Hz Z30LED Controller IF LIFETIME sali Unit lifetime LED Lifetime Menu Up Down Measure ENTER Up Down Lifetime voltage level temperature DMX tester Lifetime This menu show the total UNIT LIFE TIME reset not possible and the RGB life TIME reset possible Voltage level ENTER Internal voltage measure Voltage level Temperature Internnal External temperature measure Internal voltage measure DMX tester DMX channels tester Temperature RUE Internnal External temperature measure IF DMX tester casi DMX channels tester DMX PROTOCOL Z30 RGB 30 CHANNELS M
4. Full Color LED lamps max 3 x FOCUS RGB LED projectors max 1 x FOCUS Full Color LED projectors max 1x DIVE 3 FULL COLOUR Interface Z30 is fitted with a LED interface that lets you enter all functions of the internal menu DMX Z30 LED CONTROLLER can be used in 2 DMX mode 30 ch or 9 ch mode Operating system update Z30 internal operating system can be updated via computer through the dedicated D T S RED BOX interface Control Z30 can be controlled by any DMX console Moreover Z30 can be used in Master or Slave mode max 32 slaves Construction Z30 is housed in a sturdy metal case that offers high resistance to knocks and mechanical stress Z30 is rack mountable The protection rating against external agents is Ip20 Connections DMX IN OUT 2 XLR 5 pole by Neutrik and 2 XLR 3 pole by Neutrik LEDs connector output Two models available RJ12 female connector 03 LA 072 6 poles plug in screw connector 03 LA 077 The Maximum distance between the Z30 and the last LED unit in the line should not exeed 60 meters Z3O LED Controller MAIN ELECTRICAL CHARACTERISTICS Input Voltage Range Vin 90 260 Vac Frequency 50 60 HZ Power Consumption Range 16 200 W Power Factor Pf 0 95 electronic PFC controller Efficiency 90 typical Output Power Output Range 10 outputs of 3 channels each 1 5 5W per channel Output Current 350 mA 100 per channel Output Voltage Vout 12V Max L
5. Master and RGB active 205 229 218 Random Strobe Full 230 255 240 Open DMX CHANNEL Parameter DIMMER E Move DANDO renge range Mode Option Function Value I A EE 0 255 Proportional dimmer _ AE Move DAMA range range Mode Option Function Value AA 0 255 Proportionalcolour 4 Z3O LED Controller DUE CHANNEL ES Parameter GREEN Ga Move DADA camge range Mode Option Function Value Se 0 255 Proportionalcolour DMX CHANNEL Parameter BLUE Do Move DMX range range Mode Option Function Value aS cegrees 0 255 Proportional colour DMX CHANNEL 6 Parameter WHITE Pre programmed White at diff color temperature DMX range Mode Option Function Value 055 No Function 56 105 80 Full Red Green Blue at Full 106 155 130 White DTS IF CHANNEL 9 FUNCTIONS CUSTOM WHITE RECALL Dmx range value 0 79 156 205 180 Custom White Recall White CTC Channel 7 CTC enabled 2000299 2 43 color temp Correction Macros 2000 K 7200 K IF CHANNEL 9 FUNCTIONS CUSTOM WHITE CREATE Dmx range value 80 160 156 205 Custom White Create RGB levels selectable by DMX 206 255 White CTC Channel 7 CTC enabled 43 color temp Correction Macros 2000 K 7200 K _DMX CHANNEL 7 Parameter CTC Color temperature correction Move DI VOS TELE range Mode Option Function Value degrees IF CHANNEL 6 White WHITE CTC Dmx range value 206 255
6. Pin 4 GREEN Pin 5 BLUE MPNWNEONS Pin 6 BLUE Pin1 RED 6 poles plug in screw connector For application where IP65 rating is not necessary Z30 LEDs cabling connection can be done with a standard UTP TIA EIA 568 B2 category 5E cable The maximum distance between power supply and the last unit on the line should not exceed 60meters For IP65 rating application D T S reccomed the use of a IP65 68 cable as the 4X2XAWG24 multipolar black outdoor cable D T S Code 0509C062 The maximum distance between power supply and the last unit on the line should not exceed 60meters a Z30 LED Controller DMX SIGNAL CONNECTION The unit operates using a digital DMX 512 signal Connection between the controller and the unit or between units must be carried out using a two pair screened g 0 5 mm cable and a CANNON XLR 3 5 pins connector Ensure that the conductors do not touch each other Do not connect the cable ground to the XLR chassis The plug housing must be isolated Connect the mixer signal to the DMX IN of the Z30 plug and connect it to the next unit by connecting the DMX OUT plug on the first Z30 to the DMX IN plug of the second one This way all the projectors are cascade connected N ms ta li ne ad al NO NES CEEE J ae E PI wii E SHEN Standard Pa DMX 512 KJ controller 3 ian a c
7. by computer Upload firmware Upload the firmware by DMX This menu allow to upgrade the unit s software by Download firmware computer This menu allow to save unit s programs into SE Download firmware ag ENTER About This menu allow to save unit s programs into Master pcb code pcb revision SW version computer About Master pcb code pcb revision SW version ENTER Z30LED Controller Menu Up Down Display Setting ENTER Up Down Flip visual ENTER sin sei ii Flip visual OFF Default ip visual Background colour Backlight leve Fli i ip visual ON contrast level Screen saver Flip visual Reverses display s reading depending on the mounting position On the ground or suspended Background color To select the colour of the display background Backlight level Default 95 Contrast level Display contrast Screen saver This menu allow to activate the screen saver Background color Background NORMAL Default Background REVERSE Backlight level Back light intensity from 0 to 100 default 95 Contrast level Page under construction Screen saver Screen saver TYPE default disabled Screen saver TIME default 10 sec Menu Up Down Mode setting DMX MODE To select DMX mode 30 DMX ch or 9 DMX channel control ENTER Up Down MODE SETTING DMX mode setting Full control map 30 DMX ch default Z1 type map 9 DMX ch mode ENTER ENTER ENTER ENTER ENTER
8. 0 255 43 color temp Correction Macros 0 2000 K 128 5500 K 255 7200 K IF CHANNEL 6 White NO FUNCTION Dmx range value 0 43 0 255 Smooth RGB linear Hue correction Z30 LED Controller DMX DMX CHANNEL 8 Parameter COLOUR MACROS Move DMX range range Mode Option Function Value Rn get 014 14 No Function Function aT TT 3044 Macro2 OO 45589 TEE IET Mero O 7589 MacroS O A Macro6 OS oso MaeroT O_O 120134 oo Macro8 O 135 149 Macro9 OO 150 164 Macro 165 179 Macro 180 194 Macro dt 195 209 Macrold OS 210 225 Macro 2262239 Maro 240255 Macro O DMX CHANNEL 9 Parameter FUNCTIONS Recall Create and Store the Custom white Move DMA range range Mode Option Function Value degrees 0 79 O Custom White Recall Enable CH 6 for Custom white Recall 80 160 MO Custom White Create Enable CH 6 for Custom white Creation 161 255 N Custom White Store Store the Custom White created os Z30 LED Controller WIRING DIAGRAMS Z30 is available in 2 version with different LED output connectors RJ12 female connectors 03 LA 072 and 6 poles plug in screw connectors 03 LA 077 RJ12 Female RJ12 LED input LEDS panel connector male cable connector CONNECTOR PINOUT Rj12 on board Z30 LED on board CONTROLLER Focus Helios 03 LA 072 MR16 led lamps al pin 2 RED AI Pin
9. 3 GREEN E Pin 4 GREEN 6 15 Pin 9 BLUE Pin 6 BLUE 6 pin Female RJ12 123456 6 poles plug in LEDS screw connector CONNECTOR PINOUT on board Z30 LED 6 poles plug in CONTROLLER screw connector 03 LA 077 Pin 1 RED Pin 2 RED Pin 3 GREEN Pin 4 GREEN LSVO9S Pin 5 BLUE Pin 6 BLUE 1 PIN 6 6 poles plug in screw connector M12 LED input M12 LED output LEDS Male cable connector Female panel connector CONNECTOR PINOUT M12 on board on board FOS 100 FOS 33 Z10 Z1 outdoor TITAN led controller Pin 1 RED Pin 2 RED Pin 3 GREEN Pin 4 GREEN Pin 5 BLUE Pin 6 BLUE Pin 7 Amber Pin 8 Amber 24 LED UNITS WIRING CONNECTION 03 LA 072 RJ12 OUTPUT Z30 LED Controller J L SS Ri 6 pin Female RJ12 Mp HHH oo LEDs OUT 5 6 pin Female RJ12 i Saa i EDS OUT 4 CA LT 3 iii D T S T BOX CODE 03 LA 001 IMPORTANT The maximum number of MR16 FOCUS RGB LED lamps connectable to each Z30 LEDs output is 3 pcs Never plug the cable coming from the Power supply lamps are connected because a wrong connection 0 3 into OUT 1 or OUT 2 of the T BOX when other MR16 can seriously damage the lamps a Never plug in a new MR16 lamp when the power supply is turned on MR16 RGB ca MA 6 pin Male RJ12 Modular Plug
10. Italy D T S Illuminazione s r l Via Fagnano Selve 10 12 14 47843 Misano Adriatico RN Italy Tel 39 0541 611131 Fax 39 0541 611111 info dts lighting it www dts lighting it
11. NEL Parameter RED 4 DMX range Mode Option Function Value 000 255 Proportional colour DMX CHANNEL Parameter GREEN 4 DMX range Mode Option Function Value 000 255 Proportional colour DMX CHANNEL Parameter BLUE 4 DMX range Mode Option Function Value 000 255 Proportional colour DMX CHANNEL Parameter RED 5 DMX range Mode Option Function Value 000 255 gt Proportional colour DMX CHANNEL Parameter GREEN 5 DMX range Mode Option Function Value 000 255 Proportional colour DMX CHANNEL Parameter BLUE 5 DMX range Mode Option Function Value 000 255 Proportional colour t4 Z30 LED Controller DMS CHANNEL Parameter RED 6 DMX range Mode Option Function Value 000 255 Proportional colour DMX CHANNEL Parameter GREEN 6 DMX range Mode Option Function Value 000 255 Proportional colour DM CHANNEL Parameter BLUE 6 DMX range Mode Option Function Value 000 255 Proportional colour DMX CHANNEL Parameter RED 7 DMX range Mode Option Function Value 000255 gt Proportional colour DMX CHANNEL Parameter GREEN 7 DMX range Mode Option Function Value 000 255 Proportional colour DMX CHANNEL Parameter BLUE 7 DMX range Mode Option Function Value 000 255 Proportional colour a Z30 LED Controller DMS CHANNEL Parameter RED 8 DMX range Mode Option Function Value 000 255 Pro
12. ODE 60 CHANNELS MODE Default 1 RED 1 2 GREEN 1 3 BLUE 1 4 RED 2 5 GREEN 2 6 BLUE 2 7 RED 3 8 GREED 3 9 BLUE 3 10 RED 4 11 GREEN 4 12 BLUE 4 13 RED 5 14 GREEN 5 15 BLUE 5 14 RED GREED BLUE RED GREEN BLUE RED GREEN BLUE RED GREED BLUE RED OUUOAOOAONNN AO A 10 GREEN 10 BLUE 10 Z30 LED Controller DMX CHANNEL Parameter RED 1 DMX range Value 000 255 DMX CHANNEL Parameter GREEN DMX range Value 000 255 DMX CHANNEL Parameter BLUE 1 DMX range Value 000 255 Move range O O Move range OO SS I Move range Proportional colour Proportional colour Proportional colour Proportional colour Proportional colour Proportional colour E Z30 LED Controller DMX CHANNEL ES Parameter RED 2 DMX range Mode Option Function Value 000 255 Proportional colour DMX CHANNEL Parameter GREEN 2 DMX range Mode Option Function Value 000 255 Proportional colour DMX CHANNEL ES Parameter BLUE 2 DMX range Mode Option Function Value 000 255 Proportional colour DMX CHANNEL Parameter RED 3 DMX range Mode Option Function Value 000255 gt Proportional colour cs ec DMX range Mode Option Function Value 000 255 Proportional colour DM CHANNEL ES Parameter BLUE 3 DMX range Mode Option Function Value 000 255 Proportional colour LO Z30 LED Controller DMX CHAN
13. il you reach the required DMX address The numbers on the display will start flashing but the new DMX address hasn t yet been set 2 Press ENTER to confirm your selection The numbers on the display will stop flashing and the projector is now controlled by the new DMX address TIPS if you keep pushed the UP or DOWN keys the channels are calculated more quickly and you get a faster selection 10 DISPLAY FUNCTIONS Z30 MENU UP ENTER DOWN DISPLAY FUNCTIONS The Z30 display panel shows all the available functions Using these functions it is possible to change some of the parameters and add some functions Changing the D T S setting can vary the functions of the unit so that it does not respond to the DMX 512 signal used to control it Carefully follow the instructions below before carrying out any variations or selections NOTE the symbol 3 shows which key has to be pushed to obtain the desired function Z30 Software version 2 00 Security This menu allow to select a security password to lock the user s settings Global setting ENTER Menu Up Down ENTER Up Down SECURITY DEFAULT SETTING UPLOAD FIRMWARE DOWNLOAD FIRMWARE ABOUT Security This menu allow to select a security password to lock the user s settings Default Setting To restore main settings Default setting To restore main settings ENTER Upload firmware Upload the firmware by DMX This menu allow to upgrade the unit s software
14. nsions LxDxH 480 x 385 x 88 mm Weight 7 5 Kg Packing Dimensions LxDxH 490 x 390 x 90 mm Weight 8 5 Kg Z30 LED Controller INPUT OUTPUT CONNECTIONS 03 LA 072 RJ12 OUTPUT Mains Switch Displays Mains 90 260 Vac 50 60 Hz Powercon female panel connector 10 x LEDs output RJ12 Female panel connector 1 GND 2 DATA o 3 DATA Pin 1 RED Pin 2 RED Pin 3 GREEN mm TIL Pin 4 GREEN Pin 5 BLUE L cm Pin 6 BLUE 6 1 1 6 6 pin Male Rj12 6 pin Female RJ12 1 LL 6 Modular Plug RJ12 6P6C 6P6C indicates 6 positions 6 cables EN For application where IP65 rating is not necessary Z30 LEDs cabling connection can be done with a standard UTP TIA EIA 568 B2 category 5E cable The maximum distance between power supply and the last unit on the line should not exceed 60meters For IP65 rating application D T S reccomed the use of a IP65 68 cable as the 4X2XAWG24 multipolar black outdoor cable D T S Code 0509C062 The maximum distance between power supply and the last unit on the line should not exceed 60meters 4 Z30 LED Controller INPUT OUTPUT CONNECTIONS 03 LA 077 PLUG IN OUTPUT Mains Switch Displays Mains 90 260 Vac 50 60 Hz Powercon female panel connector DMX IN OMA OUT 10 x LEDs output 6 poles plug in screw connector Pin 2 RED Pin 3 GREEN
15. oad output per output 3 x MR16 RGB LED lamps 1 x MR16 Full Color LED lamps 3 x FOCUS RGB LED projectors 1 x FOCUS Full Color LED projectors 1 x DIVE 3 full colour Min Load output per group 1 x MR16 RGB LED lamp Control Input Control Signal DMX 512 Dimming System Constant Current PWM Address Range DMX 512 channels addressable by display Z30 LED Controller IMPORTANT SAFETY INFORMATION Fire prevention Never locate the fixture on any flammable surface Minimum distance from flammable materials 10 cm Replace any blown or damaged fuses only with those of identical value Prevention from electric shock High voltage is present inside the unit Unplug the unit prior to performing any operation which involves touching the inside of the unit This equipment must be grounded do not connect to non grounded supplies The use of a thermal magnetic circuit breaker is recommended for each Z30 Use only AC supplies 90 260V 50 60Hz The unit should never be located in position exposed to rain or in areas of extreme humidity A good air ventilation is essential for proper equipment work Safety The external surface of the unit may exeed 50 C never handle the unit until at least 5 minutes have elapsed since the unit was turned off Never install the unit in an enclosed area lacking sufficient air flow The ambient temperature should not exeed 40 C and should not be lower than 10 C UNIT DIMENSION 432 mm Unit Dime
16. onga nen ue ro len ue f 1 E g mma E ms a Da Standard Day 1 GND DMx512 amd Lo dm controller ES If the display showing the DMX address flashes then one of the following errors has occurred DMX signal not present DMX reception problem For Installations where long distance DMX cable connections are needed we suggest to use a DMX terminator The DMX terminator is a male XLR 3 5 pins connector with a 120 ohm resistor Between pin 2 and 3 The DMX terminator must be plugged into the last unit DMX out panel connector of the DMX line PLACE A 120 OHM RESISTOR BETWEEN PIN 2 AND 3 OF A MALE XRL CONNECTOR AND PLUG IT INTO THE DMX OUT PANEL CONNECTOR OF THE LAST UNIT CONNECTED TO THE DMX LINE PIN 3 PIN 2 2 Z30 LED Controller DMX ADDRESS Z30 LED CONTROLLER can be used in 2 DMX mode 30 ch or 9 ch mode If you want to use the Z30 in 30 channels mode select the 30 CH mode from the MODE menu and set the following addresses on the mixer Projector 1 A001 Projector 2 A031 Projector 3 A061 e Ao projector 6 A151 If you want to use the Z30 in 9 channels mode select the 9 CH mode from the MODE menu and set the following addresses on the mixer Projector 1 A001 Projector 2 A010 If you want to select the next projector just add 9 Projector 3 A019 ais A projector 6 A046 Selelcting the DMX address 1 Press the UP DOWN key unt
17. portional colour DMX CHANNEL Parameter GREEN 8 DMX range Mode Option Function Value 000 255 Proportional colour DM CHANNEL Parameter BLUE 8 DMX range Mode Option Function Value 000 255 Proportional colour DMS CHANNEL Parameter RED 9 DMX range Mode Option Function Value 000255 gt Proportional colour DM CHANNEL Parameter GREEN 9 DMX range Mode Option Function Value 000 255 Proportional colour DMX CHANNEL Parameter BLUE 9 DMX range Mode Option Function Value 000 255 Proportional colour 13 Z30 LED Controller e D DMX range Mode Option Function Value 000 255 Proportional colour Parameter GREEN 10 DMX range Mode Option Function Value 000 255 Proportional colour DMX range Mode Option Function Value 000 255 Proportional colour 4 Z3O LED Controller DMX PROTOCOL 9 CHANNELS MODE SHUTTER DIMMER RED GREEN BLUE WHITE Pre programmed whites at different color temperatures CTC COLOURS MACRO FUNCTIONS OON A URWN FE Parameter SHUTTER DMX range Mode Option Function Value a Black out 10 19 14 Open 2029 24 Black out 30 119 Strobe at variable speed from slow to fast 3400ms 20ms 120 149 Pulse open at variable speed from slow to fast 43s 100ms 150 179 Po Pulse close at variable speed from slow to fast 43s 100ms 180 204 192 Random Strobe
18. sans le consentement pr alable de D T S D T S se r serve le droit d apporter toutes modifications et am liorations esth tiques fonctionnelles ou de design sans pr avis chacun de ses produits D T S d cline toute responsabilit sur I utilisation ou sur l application des produits ou des circuits d crits Las informaciones contenidas en este documento han sido cuidadosamenteredactadas y controladas Con todo no se asume ninguna responsabilidad por eventuales inexactitudes Todos los derechos han sido reservados y este documento no puede ser copiado fotocopiado o reproducido total o parcialmente sin previa autorizaci nescrita de D T S D T S se reserva el derecho a aportar sin previo aviso cambios y modificaciones de caracter est tico funcional o de disefio a cada producto suyo D T S no se asume responsabilidad de ningun tipo sobre la utilizacion o sobre la aplicacio n de los productos o de los circuitos descritos Z30 LED Controller DESCRIPTION Overview Z30 is a power supply DMX LED controllers designed to control the following D T S LED products FOCUS LED projectors MR16 LED lamps DIVE 3 System Z30 is fitted with 10 outputs of 3 channels each max power of each output is 15W max power of each channel is 5W BW RED 5W GREEN 5W BLUE Each output can supply and control an independent set up of D T S LED products at the same time like one of the following max 3 x MR16 RGB LED lamps max 1 x MR16
19. ver plug in a new MR16 lamp when the power supply is turned on MR16 RGB L Z30 LED Controller LED UNITS WIRING CONNECTION 03 LA 077 PLUG IN OUTPUT LEDs OUT 10 SY YA A gt A AS a a a E ccsecesereee LEDS OUT4 a o irene LEDS OUT E aa 1 SN PIN OS 6 RS LEDS OUTPUT 1 LEDS OUTPUT 2 DIVE3 FULL COLOUR DIVE9 RGB R IMPORTANT The maximum number of MR16 FOCUS FULL COLOUR LED lamps DIVE3 FULL COLOUR DIVE9 RGB connectable to each 230 LEDs output is 1 pcs Never plug in a new unit when the power supply is turned on NOTE NOTE NOTE The information contained in this publication has been carefully prepared and checked However no responsibility will be taken for any errors All rights are reserved and this document cannot be copied photocopied or reproduced in part or completely without prior written consent from D T S D T S reserves the right to make any aesthetic functional or design modifications to any of its products without prior notice D T S assumes no responsibility for the use or application of the products or circuits described herein MADE IN ITALY C E The Lighting Company ISO 9001 2000 D T S quality system Is certified to the ISO 9001 2000 standard D T S Products are designed And manufactured at the D T S Plants in
Download Pdf Manuals
Related Search