JXDE-S2 (H1) Set Top Box User Manual
Contents
1. Je JXDE S2 H1 Set Top Box User Manual V1 0 Chengdu Jiexun Electronics Co Ltd Important Safety Instructions 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Do not use this apparatus near water 6 Clean only with dry cloth 7 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 8 Operate this product only from the type of power source indicated on the label If you are not sure of the type of power connected to your home consult your local power company Disconnect the unit from the mains before any maintenance or installation procedure 9 Protect the mains cord from damage and stress 10 Only use attachments accessories specified by the manufacturer 11 Unplug this apparatus during lighting storms or when unused for long periods of time 12 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way including damage to the mains cord or plug if the unit has been exposed to liquid or moisture CAUTION RISK OF ELECTRIC SHOCK f DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR symbol indicates that dangerous voltages constituting a risk of electric shock are present within this unit symbol indicates that there are important operating and maintenance instructi2. rune EE ry a foots Ry a yo Ug k7 20 gt ama aa 2 10 j i w e a 21 i o gt i ie ke J ae er ee i pus menu 18 OK select the highlighted item 19 TV RADIO switch between TV and Radio mode 20 RECALL return to the last selected channel 21 GOTO set the play time of media when watching TV channel in the state to USB 22 NEXT skip to next stage when play media file 23 PREV skip to previous stage when play media file 24 REPEAT turn on off repeat mode 25 STOP stop media play 26 Colour buttons operate different functions in screen TEXT 4 Installation Introduction This manual will help you learn the basic use of your receiver such as installation selecting channels and many other functions of the set top box 4 1 Satellite Dish Installation Please refer to the separate documentation Satellite Dish Installation Guide to install your dish You will need to assemble erect and roughly align your dish to your chosen satellite before connecting up and turning on your Receiver 4 2 Receiver Installation 4 2 1 Connecting your receiver Having completed the assembly and erection of your dish connect the satellite cable from your dish to the LNB IN terminal on your receiver and your HDMI lead from the rear of your receiver to an available sockiet on your TV or AV ampligier If you are not using an HD compatible TV then you will need to connect your TV using the HDMI socke
3. AUTO Frame Rate to choose between PAL NTSC or Auto as the output type Timer Record Device select from USB DEVICE Memory Stick or compatible USB HDD Drive VCR or NONE as the recording device Set NONE as default NOTE not all USB HDD Drives may be compatible with this Receiver 5 3 2 Local Time Setting Here you can set the TIME and DATE on your Receiver GMT Usage to activate GMT Time Offset Settings set the GMT Time offset number of hours from 12 to 12 default set to OFF Manual Time Setting Default set to OFF Manual Date Time Setting to edit the time and date setting the MANUAL TIME SETTING will need to be set to ON Local Date dd mm yy Set the local time by inputing numbers 0 9 for hour and minute Local Time hh mm set the local time by inputing numbers 0 9 for hour and minute Note It is recommended you leave both GMT USAGE and MANUAL TIME SETTING to the default setting of OFF in this way your date and time will be set automatically from received programmes 5 3 3 Timer The TIMER Menu provides access to 8 Timers for you to programme enabling you to switch to your desired programme at a specific time to avoid missing something you want to watch Using the VOL VOL and CH CH buttons to set the preferred configuration press the OK button to set the timer you can also set the preferred Power on mode for TV or Radio Time Number select from Timer to 8 you can set 8 different Timers in
4. information User Latitude enter your latitude using the numerical keys North South default is North for UK User Longitude enter your longitude using the numerical keys East west select east west depending on the satellite locations USALS set to On as required Enter the required information as above and then press OK to save and exit back to the INSTALLATION MENU Please refer to your Mororised Dish Installation Manual for further information 7 Software Update Note this function must be used with EXTREME CAUTION Only software provided by your service centre can be used Use of other software may damage your device and invalidate your warranty During the UPDATE process DO NOT press any buttons or switch the unit off Procedure 1 turn on the set top box insert the USB device enter MENU gt User s Conference gt Multimedia select the USB device and press the OK button to enter and then select the BIN file and press the RED button AUDIO on the remote control to begin the update 2 After erasing the original software the new software will be installed This may take several minutes 3 When the update is finished the set top box will restart automatically 8 Trouble Shooting If you have problems with the set top box please consult the table below because it may be a simple problem that can be solved at home Possible Cause Possible Remedy Power turned on but Plug
5. information on screen When you have connected to the USB device to the set top box press the USB button on the remote control to open the USB menu then select a file and press the OK button to play With the media player you can play stop go forward rewind and open other file NOTE Only the programme being viewed can be recorded Recording is activated by pressing the Record button on the Remote Control Button 34 The recorded programme can be found in the folder PVR In the USB menu there are five functions Update select a BIN file and then press the RED button on the remote control to update the software on the set top box Note further information on this procedure is available in Section 7 This function MUST be used with EXTREME CAYTION Only software provided by your Service Centre can be used Use of other Software may damage your device and invalidate your warranty During the UPDATE process DO NOT press any buttons or switch the unit off Delete choose a file with remote control and then press the Green button on the remote control to delete the selected file Format select the USB device and then press the Yellow button on the remote control to rename the file NOTE Caution reformatting will erase all data on the USB device Edit select the USB device and then press the blue button on the remote control to rename the file 5 4 3 Factory Default This option deletes all stored pr
6. not inserted correctly Remove plug and reinsert into the no display on screen socket or lights on the set top box Switch on the back of the Check the switch and switch to the On set top box is switched off position once all connections are installed The set top box has Is the satellite dish installed Reinstall the dish and calibrate it power but cannot correctly find any channels or LNB input is not connected Reconnect the cable to the LNB and strength Bad weather Attempt again later during better Incorrect setup of settings Set the proper parameters of received programme in the system settings menu The set top box has Bad connection between Check all the connection cables power but on TV TV and the set top box shows No signal or cannot switch to Incompatible video format Press the V format button on the remote the input the set top control To cycle between the different box 1s connected to formats Video stops Changed V format The set top box needs time to change disappears output format wait for a few seconds and video and audio will return TV program plays a Channel may contain more User can use the Audio button on the strange sound than one audio track or remore control to select the correct languages audio track or audio languages for the TV program Tips if you refer to this troubleshooting guide but find no solution for the proble
7. save and exit Now channel 10 is saved in the Music favourite group When you are watching your TV just press the FEV button to bring up your list of facourites then scroll through the categories to find the one you want to watch 5 2 4 Set Radio Favourites The procedure for setting Radio Favourites is identical to that for TV channels as described in Section 5 2 3 5 3 System Menu The options in this section enable you to set up options within SYSTEM SETTING to match your TV set the LOCAL TIME configure and setup timers for timed recordings in TIMER and checks SYSTEM INFORMATION Press MENU and then VOL to enter the SYSTEM Menu then use the CH CH keys to select the item you wish to adjust and the VOL VOL to select the setting 5 3 1 System Setting Adjust the SYSTEM SETTINGS to match your TV and other equipment When finished configuring the settings press OK to save and exit You will be promoted to confirm your new settings prior exiting TV type set your desired resolution selecting from 10801 720por 576p It is advised to select 10801 for High Definition Auto Standby Mode If set to ON the Receiver will go into STANDBY after three hours of inactivity Screen Mode to set between 16 9 wide screen and 4 3 TV screen mode set to Auto as default Screen Format to set the screen mode format to Letter Box Combined Pan amp Scan or Auto format SPDIF Output to set SPDIF audio format output to AC3 MPEG2 or
8. to edit the current satellite Edit the satellite name east west and longitude then press OK to save and exit 4 DELETE SATELLITE Press the blue button pause to delete the current satellite Choose the YES option to delete or the cancel option to exit Recherche Chaines 01 01 HOTBIRD 6 7A 8 6 2 Transponder This menu allows you to edit the various options for the TP transponder settings and specifications You can also manually search for single transponders programs by selecting SCAN Dish Setup Transponder Number select the transponder you wish to edit e g 5 95 Frequency check or set the Frequency of the selected transponder Symbol Rate check or set the SYMBOL RATE for the selected transponder Polarisation set to horizontal or vertical polarisation as required Scan Mode 1 SCAN Press the red button SAT to scan the current TP The scan mode is the same as satellite FTA ONLY FTA NIT ALL NIT and ALL 2 ADD TP Press the green button FAV to add a new TP Input the frequency value and symbol rate value by numeric key choose the correct polarization Horizontal or Vertical then save and exit 3 TP EDIT Press the yellow button AUDIO to edit the current TP Choose the current TP number by VOL or VOL buttons then input the frequency value and symbol rate value by numeric key choose the correct polarization Horizontal or Vertical then s
9. LT resets the whole receiver back to how it left the factory Press MENU and then VOL to enter the USER SETTINGS Menu then use the CH CH keys to select the item you wish to adjust and the VOL VOL to select the new setting 5 4 1 OSD Control In this Menu you can select the preferred MENU LANGUAGE TRANSPARENCY INFORMATION BAR TIMEOUT and REMOVE TIMESHIFT FILE Option Menu Language to select the preferred OSD language English 1s set as the default language Low Power to set the set top box to low power mode If activated the set top box will be in standby mode and only the VFD display will be on The timer function will continue to work normally Information Bar Timeout to set the timeout period for the Information Bar Remove Timeshift File to remove the Timeshift File 5 4 2 USB A USB device can be connected to the USB Port located on the front of your Receiver Compatible devices are USB Memory Sticks and most types of USB HDD devices You can use the USB device to play files play games record programmes and update the Receiver software through the USB port Go the USB menu select the USB files and press the OK button to start playing Press Exit to stop and to go back to the USB menu If you want to check the size and available space of your USB device just press the INFO button to display it When playing a programme full screen press the shortcut key USB to display the USB
10. MAL LNB Low Frequency LNB High Frequency Input the LNB low and LNB high frequency or your LNB using the numeric keys if required 22KHz Tone Control if the LNB frequency is not universal the 22 KHZ should be set to OFF DiSEqc Control if your satellite receiver has been connected to a DiSEqC switch select the port LNB1 LNB4 of DiSEgC or the TONE BURST A or B as appropriate Scan Mode Select the desired scanning mode for the satellite FTA only ALL FTA NIT or ALL NIT FTA only to search for all the Free channels available with the selected satellite or transponders ALL to search for all the Free Channels Scrambled Channels available with the selected satellite or transponders FTA NIT to search for all the free channels available with the selected satellite or transponders including the new transponders that are not pre programmed in your set top box broadcasted by the satellite stream ALL4NIT to search for all channels availabole with selected satellite or transponders including the new transponders that are not pre programmed in your set top box but broadcasted by the satellite stream 1 scan Press the RED button SAT to search for channels from the current satellite 2 Add satellite Press the green button FAV to add a new satellite configure the settings such as satellite name east west and longitude then press OK to save and exit 3 ESIT SATELLITE Press the yellow button AUDIO
11. Pb connect to TV set Cb Pb input terminal Cr Pr connect to TV set Cr Pr input terminal VEDEO connect to TV set video input terminal L connect to TV set L audio input terminal R connect to TV set R audio input terminal COAX connect to Amplifier Coaxial input terminal HDMI connect to TV set HDMI input terminal 10 RF LOOP THROUGH to TV loop out connector 11 RF IN the aerial input connector A Se SS a 3 Remote Control STANDBY switch the product to on or standby EPG electronic program guide call up the EPG INFO show information of the current program PVR record TV program Personal Video Record 1 2 3 4 AUDIO select an audio language or audio mode 5 6 MENU press this button to run menu on screen and call command box 7 RIGHT LEFT navigate through the menus VOL VOL increase or decrease sound volume 8 FAVORITE display or edit the favorite program list 9 UP DOWN navigate through the menus Select the next or previous channel 10 0 9 Numeric Buttons select a channel or setting 11 FWD search forward during media play 12 REV search backward during media play 13 PLAY PAUSE pause media play start or resume media play 14 MUTE mute or restore audio output 15 TTX display teletext contents 16 SUBTITLE select subtitles language 17 EXIT exit the current memu or return to the previous Es ee ee ee 7 ii 7 Fu Sa 8 gt 19 gy IE m
12. ave and exit Dish Setup 21 TransPoncer Symbol Polarity Qualit 4 DELETE TP Press the blue button PAUSE to delete the current selected TP 6 3 Motor Configuration DiSEqC 1 2 This section is used to set up the auto satellite Dish DiSEqC 1 2 system location system Dish Setup eae ove Continue Move Step 1 maa Store Position Goto Position maa Goto Reference Quailite l EXIT OK Satellite Name Transponder choose a satellite or a TP in the same way as previously described Continuosly Move using the VOL and VOL buttons select West or East movement of the dish use the signal strength and quality bars at the bottom of the screen to judge the best position for the dish Move steps dish moves step by step adjust the dish to East or West for the best position Step size adjust the move step size in increments from to 10 Limit set using VOL buttons to fix East or West limits to disable movement limits Reference position set the original position for the satellite receiver dish 6 4 USALS DiSEqC Set up This menu is used to setup the USALS system on your set top box Longitude Angie Latitude Direction i Latitude Angle Qualit If you have a USALS motorized system you must set your position latitude and longitude in order to calculate all motor positions for viewable satellities You should refer to the motor s manual to get more
13. es You can press the CH or CH buttons to select the channel and press VOL or VOL button to choose the functions which are displayed towards the bottom of the OSD Press the OK button to activate your choice DELETE select the channel you want to delete and select the Delete funtion then press the OK button to delete the selected channel from the set top box Pressing the OK button again will cancel this operation When you exit the menu you will be prompted to confirm the delete and asked to enter your password The channel will then be deleted MOVE select the channels you want to move and select the Move function then press the OK button to bring up the pop up Move To menu box Then input the channel number you want to move your selected channel to and press the OK button again to move RENAME select the channel you want to rename and select the Rename funtion Press the OK button to bring up the pop up Rename menu To edit the channel name select the letters to rename using the VOL and CH buttons Select the save logo and press the OK button to save and exit FAV WFO GOTO EDIT select the channel you want to edit and select the Edit function press the OK button to bring up the pop up Edit menu input the PID value for Video Audio PMT PCR and Tele by the numeric keys Press the OK button to save and exit NOTE use this funct
14. ion with caution Select highlight the Select function press the CH or CH buttons to select the channels Press the OK button you can select multiple channels at any time then you can lock or delete them together 5 2 2 Radio Channel Edit Using the VOL and VOL buttons you can select from the options of LOCK DELETE MOVE RENAME EDIT and SELECT functions to edit your Radio programmes You can press the CH or CH buttons to select the channel and press VOL or VOL button to choose the functions which are displayed towards the bottom of the OSD Press the OK button to activate your choice Channel Search 01 01 HOTSIRD 6 7A 8 The procedure for editing Radio channels is identical to that for TV channels as described in Section 5 2 1 5 2 3 Set TV Favourites This easy to use option makes it simple for you to find the channels that you want to watch Personalise the list in your own way to sort favorite channels and put them into easy to find groups FAV INFO GOTO There are a total of 8 favourite sorting groups Music HDTV Finance Sport Children News Education and Film Example to include TV channel 10 in the favourite group Music Move using the CH or CH buttons to select the Music group press the OK button then you will see a logo displayed at the left beside channel 10 then press the EXIT button to
15. lish language channels such as BBC 1 2 etc and then press OK Dish Setup Ca Ku HO BIRD NOTE DO NOT change any of the other settings on the Antenna Setting Menu these have already been programmed into your receiver in the factory Now refer back to your Satelite Dish Installation Guide to fine tune your signal reception Once you are satisfied with your signal levels as displayed in the two bar graphs Q Quality L Level towards the bottom of the Antenna Setting Menu try to obtain better than 50 for both then you can press the RED Scan button Your receiver will now scan for all available programmes on your selected satellite This may take several minutes When the Scan has completed the Programmes will be saved automatically Press EXIT to leave the installation menu You can now enjoy all the available Programmes on your chosen Satellite 5 Menu System 5 1 Installation Menu In this part of manual only the basic installation is covered If you wish to set up your receiver to work with a motorised dish then please refer to SECTION 6 Advanced Installation The Menu provides access to many features and funtions which will help to improve your enjoyment of your new product Press MENU to enter the INSTALLATION Menu then use the CH CH keys to select the item you wish to adjust the VOL VOL to select the new setting Then press OK to Store 5 1 1 Selecting your satellite Use this op
16. m you encountered Please contact the Ross Helpline Do not open the set top box WARNING Problems can be caused by the use of unofficial software The use of software versions other than dealers or distributors official software will void the manufacturer s warranty It is advised that only the formal software released from dealers or distributors should be used
17. ogrammes and user settings and restores the receiver to the original factory settings NOTE use with CAYTION 5 5 Games For your entertainment and enjoyment this receiver has two pre loaded classic games TETRIS and SNAKE Tetris the classic game of Tetris Press OK to enter the game then input the speed and level by pressing the numeric keys Then press any key on the remote control to start game You can press the keys shown in the information box beside the game to play the game Snake The classic game of Snake Press OK to enter the game then choose the type of game mode and select the speed by inputing numbers 1 6 then press OK to start game You can press the keys shown in the information box beside the game to play the game 6 Advanced Installation This section is aimed at the more experienced Satellite Receiver Set Top Box user Specifically it describes how to set up your unit to work with a Motorised Dish and how to add additional satellites that are not present in the Factory pre loaded list Press MENU to enter the INSTALLATION menu then use the CH CH keys to select the item you wish to adjust and the VOL VOL to select the new setting Then press OK to store 6 1 Antenna Setting This section enables you to adjust the Receiver to match your LNB and set other parameters for your installation Dish Setup LNB Type select the type of LNB used with your Dish Options are UNIVERSAL CBAND or NOR
18. ons in the literature accompanying this unit m symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts When servicing use only identical replacement parts When the apparatus was in electrostatic circumstance it may be malfunction and need to reset by user 1 Package Contents Before installation please check the contents of the package The package should contain the following items 1 DVB S2 TV receiver xl pc 2 Remote control Xl pc 3 User Manual Xl pc 4 AV cables only for RCA connector xl pe i DVB S2 TV Receiver Remote Control User Manual roz AV cables only for RCA connector 2 Front and Rear Panel 2 1 Front panel 9 D amp DAOA wd 1 POWER BUTTON turn on off the main power supply 2 REMOTE CONTROL SENSOR Receive the signal from the remote control 3 LED DISPLAY WINDOW display channel number 4 STANDBY INDICATOR the LED will turn red if the set top box enter standby mode visually show power state of the set top box 5 USB data input from USB storage device 6 VOL select the volume down 7 WOL select the volume up 8 CH select the previous channel 9 CH select the next channel 10 MENU press this button to run menu on screen and call command box 11 OK select the highlighted item 2 2 Rear panel a 40 AC IN power supply 90 240V Y connect to TV set Y input terminal Cb
19. t then you only need to connect this as it feeds both high quality audio and video to your TV Finally plug your receiver mains plug into a wall socket but do not switch it on yet 4 2 2 Preparing your remote control Your remote control requires 2xAAA LRO3 batteries to operate Open the cover on the rear of the Remote Control by sliding it downwards and insert two batteries taking care to observe the polarity markings inside the compartment see the diagram below 4 2 3 Fast Satellite Set Up You are now ready to switch on and adjust your dish to complete alignment for this refer to the separate instructions Turn on your TV and your satellite receiver both at the wall socket and on the rear of this unit Proceed as follows Press the POWER button on your Remote Control to the STANDBY Button on the front panel of the receiver to turn the unit on Make sure your TV source is set to receive the signal from your Receiver Press the Menu Button on the Remote Control The installation menu will be displayed Using the CH Button select Antenna Setting and then press OK Your receiver has a large number of the available satellites already programmed in to make setting up easier for you You can see the satellite name at the top right of the OSD on screen display Using the VOL Button select the satellite you are aligning your dish to usually this will be the ASTRA 2A 2B 2D EUROBIRD 1 if you want the most common Free to AIR Eng
20. tion within the ANTENNA SETTING menu to select your desired satellite NOTE if you change the selected satellite you may need to readjust your dish 5 1 2 Selecting your SCAN Mode Select the scanning mode of your chosen satellite FTA only ALL FTS NIT or ALL NIT FTA only to search for all the Free Channels available with the selected satellite or transponders ALL to search for all the Free Channels Scrambled Channels available with the selected Satellite or Transponders FTA NIT to search for all the Free Channels available with the selected Satellite or Transponders including the new transponders that are not pre programmed in your set top box but broadcasted by the Satellite Stream ALL NIT to search for all the ALL Channels available with the selected Satellite or Transponders including the new transponders that are not pre programmed in your set top box but broadcasted by the Satellite Stream NOTE changing this setting from for example ALL to FTA or FTA NIT will reduce the number of Programmes stored as it will remove encrypted programmes This will make the task of editing storing programmes easier 5 2 Channel Edit Menu This section describes how you can edit your programmes To enter the CHANNEL EDIT menu press MENU and the VOL and OK 5 2 1 TV Channel Edit Using the VOL and VOL buttons you can select from the options of LOCK DELETE MOVE RENAME EDIT and SELECT functions to edit your TV programm
21. total Timer Set to activate each Timer if the Timer Set is off no other changes can be made Time Control there are 3 timer control settings Power off Only the Start Date One Time and Start Time can be set to activate the Power Off use the numeric keys to enter time and or time date information Power on use the numeric keys to enter time and date information as determined by the Timer Cycle setting Duration use the numeric keys to enter time data and duration time information as determined by the Timer Cycle setting Timer Cycle there are 3 modes available One Time to set the timer for one event only Every Day to set the timer to repeat every day Every Week to set the timer to repeat every week Start Date Time enter the Start Date and Time by pressing the numeric keys on the remote control and the set top box will change automatically to the present channel at the start time if the set top box is in standby mode it will automatically power on and change to the present channel Channel Mode to select between TV and RADIO mode Channel No to set the channel which you would like the Timer to switch to when it activates 5 3 4 System Information Provide details of the Software and Hardware versions installed in your Receiver 5 4 User Settings Menu User s Conference This section allows the setting of PARENTAL CONTROL Preferences OSD settings details of any connected USB device and finally FACTORY DEFAU
Download Pdf Manuals
Related Search