Home

- Samsung

Contents

1. Item Description 1 Monitoring Move to the monitoring screen 2 Plavback Move to the screen where you can search for the video recording saved in your Micro y SD memory card or NAS 3 Setup Move to the Setup screen 4 ee pie You can read the profile information information Displays the Live video on the screen 5 Viewer Screen i REA You can use the mouse wheel to activate the digital zooming in Viewer screen You can select a profile type in lt Video profile gt under the lt Basic gt setup menu 6 Profile type When the Web Viewer is connected the profile information currently using is displayed Screen oa ae oo The video size of the camera will switch to as big as the Web browser Optimization 46_ web viewer Item Description 8 Pehe resoiition Regardless of the resolution setup configured in the camera it sets the resolution to 640x480 Press it again to switch back to the default resolution 9 Full Screen Switch the current video to the maximum size of the monitor 10 Capture Saves the snapshot as an image file in the jpg format Manual recording You can save video on the Micro SD card To take video manually change the recording setting first Refer to Storage for how to set recording page 89 12 Audio Microphone Enable Audio and Microphone are control the Audio volume Control Only the Audio volume can be controlled 13 Alarm output
2. Closed circuit status Normal close Considers Closed circuit status of the sensor or alarm input device as normal and triggers alarm event if becomes Open circuit status 4 Set the alarm output button e Mode Sets the alarm output method There is difference between operations when clicked alarm output button while disabled Pulse It is activated during the time period specified by the duration switching interval and then becomes inactive automatically Active Inactive It maintains as activated until the user clicks the button again to make it inactive e Duration Set the alarm duration that maintains activated if the mode is set to pulse from 1 to 15 seconds 5 When done click Apply EZH 96_ setup screen Alarm input You can set the alarm input type activation time and operation mode 1 From the Setup menu select the onee E monitoring Playback LOLE lt Event F gt tab 2 Click lt Alarm input gt 3 Set whether or not to lt Enable gt 4 Select the type e Normal open It is normally open e Normal close It is normally closed 5 Specify the lt Activation time gt but if it is closed an alarm will be triggered N3JJY0S dNLAS but if it is open an alarm will be triggered e Always Always check if an alarm occurs It activates in operated mode when the alarm occurs m f set to lt Always gt the activation time cannot be ch
3. SourceH264 2560x2048 17fps DewarpH264 2048 768 Wall Single Panorama 13fps XIGNAddV Network Video Quality Adjustment H 264 Target Bitrate Level Control MJPEG Quality Level Control Bitrate Control Method H 264 CBR or VBR Motion JPEG VBR Streaming Capability Audio Compression Format Multiple streaming Up to 5 Profiles G 711 u law G 726 Selectable G 726 ADPCM 8KHz G 711 8KHz G 726 16Kbps 24Kbps 32Kbps 40Kbps Audio Communication Bi dierctional IP IPv4 IPv6 TCP IP UDP IP RTP UDP RTP TCP RTCP RTSP NTP Protocol HTTP HTTPS SSL DHCP PPPoE FTP SMTP ICMP IGMP SNMPv1 v2c v3 MIB 2 ARP DNS DDNS QoS PIM SM UPnP Bonjour English _117 aooendx Network Items Security Description SNF 8010 SNF 8010VM HTTPS SSL Login Authentication Digest Login Authentication IP Address Filtering User access Log 802 1x Authentication Streaming Method Unicast Multicast Max User Access Memory Slot 10 users at Unicast Mode micro SD SDHC SDXC 64GB motion Images recorded in the SD SDHC SDXC memory card can be downloaded Application Programming Interface ONVIF Profile S SUNAPI HTTP API v2 0 SVNP 1 2 English French German Spanish Italian Chinese Korean Russian Japanese Swedish Denish Portuguese Czech Webpage Language Polish Turkish Rumanian Serbian Dutch Croatian Hungarian Greek Norwa
4. 3 Event search 50_ web viewer Description Set the search date and time range for data saved in your Micro SD memory card or NAS Set the event type to search within the search period Run the event search To play the content after searching by event 1 Click the Playback a button 2 Specify the start time and end time of your search 3 Select an event type for your search within the specified period 4 Click the Event search button The search results will be displayed in the list D f more than 800 events are recorded within the search period your search will be limited up to the date when the 800th event is recorded For instance if the search period is between 10th and 15th day of the month and more than 800 events were recorded 10th through 11th your search will be limited up to 11th day with a total of 800 events and events after then from 12th will not be found 5 Select a data item to play in the search list 6 Click the Play f button 7 To stop playing the video click Stop R 8 To return to the search screen 2 click Exit KJ English _51 YAMAIA GAM web viewer Name of time search screen and its function Be Ce HIE Cod 60 00 I Item 1 Time bar 2 Search date setting 3 Speaker 4 Screen optimization 5 Fix the resolution 6 Capture F
5. SAMSUNG TECHWIN NETWORK CAMERA User Manual SNF 8010 SNF 8010VM CE Pins unag Network Camera User Manual Copyright 2014 Samsung Techwin Co Ltd All rights reserved Trademark PSamsungd SAMSUNG TECHWIN S the registered logo of Samsung Techwin Co Ltd The name of this product is the registered trademark of Samsung Techwin Co Ltd Other trademarks mentioned in this manual are the registered trademark of their respective company Restriction Samsung Techwin Co Ltd shall reserve the copyright of this document Under no circumstances this document shall be reproduced distributed or changed partially or wholly without formal authorization of Samsung Techwin Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document but no formal guarantee shall be provided Use of this document and the subsequent results shall be entirely on the user s own responsibility Samsung Techwin reserves the right to change the contents of this document without prior notice Design and specifications are subject to change without prior notice The initial administrator ID is admin and the password should be set when logging in for the first time Please change your password every three months to safely protect personal information and to prevent the damage of the information theft Please take note that it s a user s responsibility for the security and any o
6. AGC Select AGC Control mode Adjust the gain value of the video that in particular was recorded at a low contrast scene and had a lower brightness level than normal to control the video brightness When AGC mode is set to lt Off gt you cannot use SSNR and the lt Auto gt function of the DAY NIGHT mode The image exposure can be saturated depending on the Shutter setup range 76_ setup screen To Setup Special 1 Select lt Special gt a 2 Select each item and set it properly Sharpness mode e Sharpness mode Adjust the overall Ae sharpness of the image Gamma If selecting lt On gt you can adjust the sharpness of the image e Sharpness level The higher the level is the sharper and clearer the outline of the image becomes e Color level Adjust the strength of video color e Gamma Adjust the contrast of the image N3aYOS dNLAS To Set Day Night 1 Select lt Day Night gt ome 2 Select each item and set it properly Be e Day Night Mode is used to adjust paun the color of Color or Black and E Everyday m n a A White n i i Ej Mon s p Color The video is always output in Te m n om Mi Wed y Mm um I color aha E N BAW The video is always output in E EE N E black and white Auto Normally it is set to Color but to B amp W under low luminance at night f AGC of the lt Exposure gt menu is set to lt Off gt the day night mode cannot be set to lt Au
7. If not installed already automatically moves to the Silverlight setup BASIC SETUP Video profile 1 From the Setup menu select the SE lt Basic I gt tab se 2 Click lt Video profile gt 3 Set the lt Video profile connection policy gt e Keep connection when profile setting is changed Changing profile properties that is used by existing connection does not affect such connection and remains with old profile setup a AA If not selected changing a profile used by an existing connection resets such connection English _57 N3JJY0S dNLAS Setup screen 4 Select each profile properties For more details refer to To Add Change the Video Profile Page 60 5 Click the input box of each item and enter select a desired value The context menu may differ depending on the selected codec type e Default profile If no profile is selected when using the Web Viewer the default video profile is applied e E mail FTP profile Video profile to be transferred to the specified email or FTP site Only the MJPEG codec can be set as the E mail FTP profile e Record profile This is the profile that is applied to video recording e Audio In Sets whether to use audio for video recordings 6 According to your situation set ATC Auto Transmit Control mode e ATC mode It adjusts the video ATC mode properties according to the variance ATC sensitivity very high in t
8. Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution Neither the name of the incremental nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Copyright c 2004 Kneschke
9. SNF 801 0VM SNF 8010 SNF 8010VM SNF 8010 SNF 801 0VM SNF 801 0VM AT A GLANCE Appearance MAIAYSAO N oj o e o N N j A w lt SNF 8010VM gt English _13 overview Item Cover top Microphone hole Power Port Alarm 1 0 Port Network Port Audio Out Jack Audio In Jack M12 Female connector cable AIWF AW S NM amp 14 overview Description SNF 8010 Case cover used to protect the main unit SNF 8010VM Case cover used to protect the lens and the main unit A microphone is embedded a Itis applicable only to the SNF 8010 model Used to plug the power cable ALARM IN Used to connect the alarm input sensor ALARM OUT Used to connect the alarm output signal GND Common port for alarm output signal Used to connect the PoE or Ethernet cable for network connection Used to connect to speakers green Used to connect to a microphone pink Connect to the M12 Male connector cable for power supply and network connections Inside SS g Item Camera fixing hole MIC Fisheye lens Micro SD Memory Card Compartment Reset Button MAIAYSAO Description Hole used for
10. click Apply K SNMP v3 is only able to be set when the secure connection mode is HTTPS Refer to SSL page 83 86_ setup screen Auto IP configure You can set the IP available for access and camera searching automatically 1 From the Setup menu select the lt Network EE gt tab 2 Click lt Auto IP configure gt 3 Set the lt Link Local IPv4 address gt An additional IP address may be assigned to assess the camera from the Link Local network e Auto configure It specifies Able or Disable for the Link Local IPv4 address e P address Display the assigned IP address e Subnet mask Display the subnet mask of the assigned IP N3JJY0S dNLAS 4 Set the lt UPnP discovery gt Cameras can be automatically searched in the client and operating system in support of the UPnP protocol e UPnP discovery It specifies Able or Disable for UPnP Discovery e Friendly name Display the camera name Friendly name is displayed in the format of SAMSUNG lt Model Name gt lt MAC Address gt D m n the Windows operating system which basically supports UPnP the cameras connected to the network are displayed 5 Set the lt Bonjour gt Cameras can be automatically searched in the client and operating system in support of the Bonjour protocol e Bonjour It specifies Able or Disable for Bonjour e Friendly name Display the camera name Friendly name is displayed in the format of SAMSUNG lt Model
11. long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped English _3 overview WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus To prevent injury this apparatus must be securely attached to the Wall ceiling in accordance with the installation instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL EXPLANATION OF GRAPHICAL SYMBOLS The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended t
12. rganize N3JY0S dNLAS b a HP_PAVILION C cq HP_RECOVERY D File name Save as type Configuration Backup File bin S Hide Folders 2 Open Gv Libraries Pictures Organize New folder a Ft Favorites Pictures library B Desktop Includes s 1 locations Ip Downloads Ji Sample Picturestion E Recent Plac Backup bin b i HP_PAVILION C D cq HP_RECOVERY L gt eq data E D a PKBACK 001 Li File name English _109 Setup screen Log You can check the system log or event log 1 Click lt Log gt Select a log type From the Setup menu select the lt System E gt tab e System You can check the system logs where any system changes are recorded including the time information e Event You can check the event logs including the time information From the right log list select an item to search for e f you select lt All gt in the top left dropdown list all logs for the applicable log type will be displayed If one page can not display all the logs available use the bottom buttons to move to the previous next or the last item 1g m f you want to view the details of a log click Info E in the right column of the log the log information will be shown in the bottom pane Each page displays 15 logs with the latest one displayed at the top The event system log list can contain up to 1000 logs a
13. to use such covered code under the terms of any subsequent version of the license published by the PHP Group No one other than the PHP Group has the right to modify the terms applicable to covered code created under this License OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE The licence and distribution terms for any publically available version or derivative of this code cannot be changed i e this code cannot simply be copied and put under another distribution licence including the GNU Public Licence 6 Redistributions of any form whatsoever must retain the following acknowledgment This product includes PHP software freely available from lt http www php net software gt THIS SOFTWARE IS PROVIDED BY THE PHP DEVELOPMENT TEAM AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE PHP DEVELOPMENT TEAM OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON AN
14. when the notice window is Ts displayed E Le 4 Steps 4 and 5 will be skipped if no Web Viewer Plug in is installed 44_ web viewer 5 Click OK STWWebViewer for Windows 1 0 93 Uninstall The old version of Web Viewer Plug in _ is deleted i STWWebViewer for Windows 1 0 93 uninstallation completed 6 Click Install to begin installation of the Smm Web Viewer Plug in Welcome to the STWWebViewer for Windows 1 0 93 Setup Wizard Welcome to Samsung Techwin Network Camera Webviewer Installation Please make sure all opened browsers are completely dosed 7 Click Finish G STWWebViewer for Windows 1 0 93 Setup STW Web Viewer Plug in installation is Completing the STWWebViewer for C ompl ete d Windows 1 0 93 Setup Wizard STWWebViewer for Windows 1 0 93 has been installed on your computer Click Finish to dose this wizard m m n your internet explorer if you need to move to the installation screen after installing the STW webviewer plugin check whether webviewer_ activexplugin_lib control in the Tool gt Additional Function Management menu is Activated If not and if there is a persisting problem then select Tools gt Internet Options General and delete all the search records English _45 YAMGIA GAM web viewer USING THE LIVE SCREEN ETWORK CAMERA W EBVIEWER i Monitoring A Playback OLST ADMIN Wi Status
15. Library or any work based on the Library the recipient automatically receives a license from the original licensor to copy distribute link with or modify the Library subject to these terms and conditions You may not impose any further restrictions on the recipients exercise of the rights granted herein You are not responsible for enforcing compliance by third parties with this License 11 If as a consequence of a court judgment or allegation of patent infringement or for any other reason not limited to patent issues conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of this License If you cannot istribute so as to satisfy simultaneously your obligations nder this License and any other pertinent obligations then as a consequence you may not distribute the Library at all For example if a patent license would not permit royalty free redistribution of the Library by all those who receive copies directly or indirectly through you then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library If any portion of this section is held invalid or unenforceable under any particular circumstance the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances It is not the purpose of this section to indu
16. THERE IS NO WARRANTY FOR THE PROGRAM TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU SHOULD THE PROGRAM PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION 16 Limitation of Liability IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MODIFIES AND OR CONVEYS THE PROGRAM AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 17 Interpretation of Sections 15 and 16 If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms reviewing courts shall apply local law that most closely approximates an absolute waiver of all civ
17. The screenshot will be backed up to the specified path Pictures library Includes 1 locations To play the backup video The backed up images are saved in an avi format Gom Player VLC Player and Window Media Player are recommended as the media player compatible with this format 4 and install it prior to use 54 web viewer In case of Windows Media Player download the latest codec from www windows codecs com To Play an AVI File 1 Micro SD memory card 1 Separate the Micro SD memory card from the camera a Before separating the Micro SD memory card set the lt Device gt to lt Off gt in the Setup gt Event Storage menu 2 Insert the Micro SD memory card into the PC 3 Play the AVI file in the chOO img YYYY_mm_DD AVI directory using a media player YAMAIA GAM a jE Computer gt amp Local Disk C gt eq LOCAL DISK D 4 A filename starts with the format 001_ i eerie Disk G YYYYMMDD_HHMMSS avi and the file 5 number is incremented by one A YYYYMMDD_HHMMSS indicates the start lia time of data saving Bali a 2013 07 02 001_YYYYMMDD_HHMMSS smi file LAM is a caption file and you can view it if it DAT exists in the same directory as its related AVI file Nome Datemodifed Type Sue The max recording time per AVI file is 5 B onamo aao ee A MAI AA minutes Ai a Ae ese eas Once corrupted the data in the Micro SD memory ca
18. at your option any later version This program is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License for more details You should have received a copy of the GNU General Public License along with this program if not write to the Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Also add information on how to contact you by electronic and paper mail If the program is interactive make it output a short notice like this when it starts in an interactive mode Gnomovision version 69 Copyright C year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY for details type show w This is free software and you are welcome to redistribute it under certain conditions type show c for details The hypothetical commands show w and show c should show the appropriate parts of the General Public License Of course the commands you use may be called something other than show w and show c they could even be mouse clicks or menu items whatever suits your program You should also get your employer if you work as a programmer or your school if any to sign a copyright disclaimer for the program if necessary Here is a sample alter the names Yoyodyne Inc hereby disclaims all copyright interest
19. camera webpage for the first time after factory reset the change password menu appears A user account and its password are set to usert to user 10 for each When you access the camera web page for the first time or access it after the initialization you will be moved to the admin password setting menu In this menu you need to login again with the new password before using the camera web page menus lf the existing password is not matched when you change the admin password you cannot change the password After changing your password if there is a camera connected to a CMS or NVR client then you need to re register it with the newly changed password If the camera is still connected with the same password then the account may be locked because a client uses the previous password m If you try to login with the registered account 5 or more consecutive password authentication has failed and then the account may be locked for thirty seconds When the password is changed while multiple connections are active from a PC the browser may malfunction In that case reconnect to the server e Guest setup If you select lt Enable guest access gt the guest account can access the Web viewer screen but can only view the live Viewer screen The ID password for the guest account is lt guest guest gt which cannot be changed e Authentication setup If you select lt Enable RTSP connection without authentication gt you can access RT
20. different addresses If a single address is used for multiple cameras the images may overlap No image appears e f the transmission method is set to multicast check whether there is a router that supports multicast in the LAN the camera is connected to 122 appendix PROBLEM lt Motion detection gt of lt Event gt is set to lt Enable gt but no notification e mail reaches me even when a motion event had occurred No signal is found at the Alarm Output port even when an intelligent video analysis event is generated SOLUTION e Verify the settings in the following sequence A Check lt Data amp Time gt settings B The lt Motion detection gt should be set to lt Enable gt C Check if the lt E mail gt option of lt Event setup gt menu is checked to use XIGNAddV e Check alarm output port settings Cannot record into the Micro SD memory card e Check if the memory card is defective Micro SD memory card is inserted but the camera does not operate properly Cannot record in the NAS e Check if the memory card is inserted in the proper direction Operation of memory card that is formatted by other devices is not guaranteed with this camera unit e Format the memory card again in lt Setup gt gt lt Event gt gt lt Storage gt menu e Confirm that the information registered in the NAS is correct It reports that NAS setting has failed e Confirm that the I
21. file The lt HTTPS Secure connection mode using the public certificate gt item will be active only if there exists a public certificate installed 5 When done click Apply Installing the certificate 1 Enter the certificate name 2 Click the Browse EEJ button select the public certificate file and key file to be installed and then click the Install EZZ button Deleting the certificate 1 Click Delete E3228 button 2 To delete a public certificate you should access the network video decoder in the mode of lt HTTP Do not use secure connection gt or lt HTTPS Secure connection mode using a unique certificate gt English _83 Setup screen 802 1x When connecting network you can choose whether using 802 1x protocol and then install the certification 1 From the Setup menu select the lt Network EE gt tab 2 Click lt 802 1x gt 3 Set the lt IEEE 802 1x setting EAPOL using EAP TLS gt e EEE 802 1x Specify the use of the 802 1x protocol e EAPOL version Select version 1 or 2 e D Enter the client certificate ID e Password Enter the client private key password If the key file used is not encrypted you don t need to enter it AC m f the connected network device does not support the 802 1x protocol the protocol will not operate properly even if you set it 4 Install remove the certificate e CA certificates Select a public certificate tha
22. heating equipment or heavy cold area e Do not place this apparatus near conductive material e Do not attempt to service this apparatus yourself e Do not place a glass of water on the product e Do not install near any magnetic sources e Do not block any ventilation openings e Do not place heavy items on the product User s Manual is a guidance book for how to use the products The meaning of the symbols are shown below e Reference In case of providing information for helping of product s usages e Notice If there s any possibility to occur any damages for the goods and human caused by not following the instruction Please read this manual for the safety before using of goods and keep it in the safe place 6_ overview CONTENTS OVERVIEW INSTALLATION amp CONNECTION NETWORK CONNECTION AND SETUP 3 9 10 10 11 13 16 19 20 21 28 29 30 31 32 33 37 38 40 40 Important Safety Instructions Product Features Recommended PC Specifications Recommended Micro SD SDHC SDXC Memory Card Specifications NAS recommended specs What s Included At a Glance MAIAYSAO Installation Inserting Removing a Micro SD Memory Card Memory Card Information Not Included Connecting with other Device Connecting the Camera Directly to Local Area Networking Connecting the Camera Directly to a DHCP Based DSL Cable Modem Connecting the Camera Directly to a PPPoE Modem Connect
23. in an IPv6 compliant environment only A 10 Search scans for cameras that are currently connected to the network Z However this button will be grayed out if neither IPv4 nor IPv6 is checked m 11 Auto Set The IP Installer automatically configures the network settings 2 Z Oo 12 Manual Set You should configure the network settings manually o 13 Exit Exits the IP Installer program bi 4 For the IP installer use only the installer version provided in the installation CD or use the latest one if available You can download the latest version from the Samsung web site www samsungcctv com STATIC IP SETUP Manual Network Setup Run lt IP Installer_v2 XX exe gt to display the camera search list At the initial startup both Auto Set and Manual Set will be grayed out D For cameras found with the IPv6 setting these buttons will be grayed out as the cameras do not support this function 1 Select a camera in the search list Check the MAC address of the camera on the camera s label Both the Auto Set and Manual Set buttons will be activated 2 Click Manual Set The Manual Setting dialog appears lt IP Address gt lt Subnet Mask gt lt Gateway gt lt HTTP Ports and lt VNP Port gt of the camera are displayed in the preset values English _33 network connection and setup 3 In the lt Address gt pane provide the Manual Setting nece
24. in the program Gnomovision which makes passes at compilers written by James Hacker signature of Ty Coon 1 April 1989 Ty Coon President of Vice This General Public License does not permit incorporating your program into proprietary programs If your program is a subroutine library you may consider it more useful to permit linking proprietary applications with the library If this is Lwihcaetn ysoeu want to do use the GNU Lesser General Public instead of this License GNU GENERAL PUBLIC LICENSE Version 3 29 June 2007 Copyright C 2007 Free Software Foundation Inc lt http fsf org gt Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed Preamble The GNU General Public License is a free copyleft license for software and other kinds of works The licenses for most software and other practical works are designed to take away your freedom to share and change the works By contrast the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program to make sure it remains free software for all its users We the Free Software Foundation use the GNU General Public License for most of our software it applies also to any other work released this way by its authors You can apply it to your programs too When we speak of free software we are referring to freedom not price Our General Public License
25. incremental All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution Neither the name of the incremental nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMA
26. infringe any patents or other property right claims or to contest validity of any such claims this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system it is up to the author donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License 8 If the distribution and or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries so that distribution is permitted only in or among countries not thus excluded In such case this License incorporates the limitation as if written in the body of this License 9 The Free Software Foundation may publish revised and or new versions of the General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Program s
27. m f selected lt Allow gt for IP Filtering and lt IPv6 setup gt of lt IP amp Port gt is set to lt Use gt both IPv4 and IPv6 addresses of the computer currently configuring should be assigned The IP address of the computer used for the current setup cannot be added to lt Deny gt it should be added to lt Allow gt Only the IP addresses that are set to lt Use gt will be displayed in the filter column 6 Select an IP to delete from the list Click the Delete button 7 When done click Apply EE 82_ setup screen SSL You can select a secure connection system or install the public certificate for this purpose 1 From the Setup menu select the lt Network EE gt tab 2 Click lt SSL gt 3 Select a secure connection system To access the camera using HTTPS mode you have to type the IP address for the camera in the form of https lt Camera_IP gt If you failed to configure the Web viewer settings in HTTPS mode with Internet Explorer edit the Internet options as follows lt Menu Tools gt Internet Options gt Advanced gt Security gt Uncheck TLS 1 0 and check TLS 1 1 TLS 1 2 gt NJJY0S dNLJS 4 Search for the public certificate that you want to install on the camera To install the certificate on the camera you need to provide a certificate name it can be arbitrarily assigned by the user certificate file issued from the certification authority and a key
28. or options such as a menu a prominent item in the list meets this criterion 1 Source Code The source code for a work means the preferred form of the work for making modifications to it Object code means any non source form of a work A Standard Interface means an interface that either is an official standard defined by a recognized standards body or in the case of interfaces specified for a particular programming language one that is widely used among developers working in that language The System Libraries of an executable work include anything other than the work as a whole that a is included in the normal form of packaging a Major Component but which is not part of that Major Component and b serves only to enable use of the work with that Major Component or to implement a Standard Interface for which an implementation is available to the public in source code form A Major Component in this context means a major essential component kernel window system and so on of the specific operating system if any on which the executable work runs or a compiler used to produce the work or an object code interpreter used to run it The Corresponding Source for a work in object code form means all the source code needed to generate install and for an executable work run the object code and to modify the work including scripts to control those activities However it does not inc
29. securing the camera onto a ceiling The MIC is built into the camera a Itis applicable only to the SNF 8010 model This lens has 360 vision and it can record video panoramically Compartment for the Micro SD memory card The button restores all camera settings to the factory default Press and hold for about 5 seconds to reboot the system E If you reset the camera the network settings will be adjusted so that DHCP can be enabled If there is no DHCP server in the network you must run the IP Installer program to change the basic network settings such as IP address Subnet mask Gateway etc before you can connect to the network English _15 Installation amp connection INSTALLATION i This camera SNF 8010VM is waterproof and in compliance with the IP66 spec but the jack connected to the external cable is not You are recommended to install this product below the edge of eaves to prevent the cable from being externally exposed Precautions before installation Ensure you read out the following instructions before installing the camera e Select an installation site that can hold at least 5 times the camera s weight e Stuck in or peeled off cables can cause damage to the product or a fire e For safety purposes keep anyone else away from the installation site And put aside personal belongings from the site just in case Disassembling 1 Using the L shaped wrench or drill bit provided with the product un
30. the Play Interval l gt Select this button to move 1 frame forward lt l Select this button to move 1 second back Tocontrol the play speed If selecting gt the button will switch to x1 x2 x4 x8 and the play speed will increase accordingly When the lt 4 button is selected the playing speed is decreased to 1x 2x 4x 8x and the playing speed slows down gradually Subsequently the quick playing speed is returned to the normal speed and the reverse playing speed increases To control the playback direction If you see the gt gt button with the play speed displayed the video will be played forward Whereas if you see the lt 4 button with the play speed displayed the video will be played backward How to set the time bar If you press the button the details of the time bar section can be viewed If you press the EE button you can view a wider range of times and the desired time can be selected more easily English _53 web viewer 6 Move Time bar Hi to a desired time point of the video before playing it The time containing a normal recoding file will be highlighted in blue the time with the event recording will be highlighted in red To back up the searched video 1 Click button Confirm the save path and click Save During playback click Ke9 on the scene to back up The scheduling window for backup start and end time appears The Save As window appears button
31. thev continue to henefit the Bi toe 2 From the top menu bar select lt DDNS wars Pos propuct Dons senvice SERVICE gt lt MY DDNS gt a VIDEO TAG CE OF THE PERFECT NETWORKING 3 Click PRODUCT REGISTRATION MY DDNS Cieri EARS 4 Enter the product ID Current product list is displayed If wanted product is not in the list click Product Registration at the botton You must perform the duplicate check for the ree mom aor sane var acme voros ID that you entered 5 Select a lt CLASSIFICATIONS gt and niece EA specify the lt MODEL NUMBER gt 6 Specify the product location with a description if necessary i E ARTA Darman PRODUCT ID To register multiple products please enter their Product ID separately Register a new IPOLIS product and manage your videos in real time Mandatory Information gt You may not able to change the initial product ID name 7 Click REGISTRATION ee Sema The product will be added to the aa a product list that you can check sa ae gt Choose product model gt Determine the location to install the system or camera gt Designate the installation location within 10 alphabet letters DESCRIPTION gt Describe product for management purpose 80_ setup screen To connect to the Samsung DDNS in camera setup 1 From the DDNS setup page set lt DDNS gt to lt Samsung DDNS gt 2 Provide the lt Product ID gt that you r
32. video quality or frame rate variable bitrate means that a higher priority is placed on the video quality while varying the bitrate m After setting the fixed bit rate for bit control if you select the video quality priority mode depending on the complexity of the screen the actual transmitted frame rate may differ from the frame rate setup in order to guarantee the optimal video quality for the given bit rate 60_ setup screen e Encoding priority You can set the priority of video transmission to frame rate or compression e GOV length It specifies the distance in terms of number of frames between two consecutive I Frames in a video sequence when H 264 codec was selected One Frame 0 Several P Frames e Multicast SVNP Specify the use of the SVNP protocol IP address Enter an IPv4 address with which you can connect to the IPv4 network Port Specify the video communication port TTL Set the TTL for the SVNP packet e Multicast RTP Specify the use of the RTP protocol IP address Enter an IPv4 address with which you can connect to the IPv4 network Port Specify the video communication port TTL You can set the TTL for the RTP packet m m f you set the Multicast address to 224 0 0 0 224 0 0 255 multicast may not work properly in all environments In that case we recommend you change the multicast address N3JJY0S dNLAS What is GOV length GOV Group of Video object planes is a set of
33. you are recommended to use a NAS with the following manufacturer s 2 specs D lt Recommended products Available sizes z Netgear NAS A maximum of 16 cameras can access simultaneously Synology NAS A maximum of 16 cameras can access simultaneously When you use Netgear s NAS equipment do not allocate the capacity for use f you use NAS equipment for purposes other than video saving the number of accessible cameras may be reduced WHAT S INCLUDED Please check if your camera and accessories are all included in the product package 1 A SNF 8010 or SNF 8010VM 1 Instruction book I SNF 8010 Installer SAW CD SNF 8010VM Quick Guide I SNF 8010 Optional SNF 8010VM English _11 overview Warranty card Optional To remove fix the cover top Used to disassemble or assemble the top cover or install the camera Product installation guide Used for installation on the wall or ceiling For fixing a screw Inserted in a hole reinforced anchoring force Plastic Anchor Used for assembling the dome case when installing the product on the pipe wall mount etc or blocking a hole Machine Screws Using it to connect the M12 connector of your camera to general network equipment M12 RJ45 conversion cable rom 12 overview Model Name SNF 8010 SNF 801 0VM SNF 8010 SNF 801 0VM SNF 8010 SNF 801 0VM SNF 8010 SNF 801 0VM SNF 8010
34. you want to delete a preset added select it and press the SEZ button 4 Press the MEJE button Saved in the bottom list 5 Press the EEZ button It performs the group operation 6 Press the EEZ button The running group will be stop 7 Press the REZA button Selected group data will be deleted English _69 N3aYOS dNLAS Setup screen VIDEO amp AUDIO SETUP Video setup 1 From the Setup menu select the lt Video amp Audio 3 gt tab 2 Click lt Video setup gt 3 Select a lt Video source gt mode e Flip Turns the camera images upside down e Mirror Interchanges the left and the right of the camera images 4 Specify the privacy zone 5 When done click Apply To set the privacy zone You can specify a certain area of the camera video to be protected for your privacy 1 Set it to lt On gt 2 Select the color masking of desired privacy area 3 When dore click Apply 4 Click Y Show 5 Place the cursor at a point in the video and drag it to whatever you need 6 Check if the area shown on the screen matches with the target area type the name and click the OK button If the displayed area does not match with the set area click Cancel and reset the area 7 lf you want to delete a name in the list select it and click Delete EEJ 70_ setup screen Dewarping mode Sets the camera position and give the in
35. A dN13S ANY NOILOANNOO MYOMLAN Local P Configuring the network settings of the local PC connected to a Broadband Router Configuring the network settings of the local PC connected to a Broadband Router follow the instructions below e Select lt Network gt gt lt Properties gt gt lt Local Area Connection gt gt lt General gt gt lt Properties gt gt lt Internet Protocol TCP IP gt gt lt Properties gt gt lt Obtain an IP address automatically gt or lt Use the following IP address gt e Follow the instructions below if you select lt Use the following IP address gt ex1 If the address LAN IP of the Broadband Router is 192 168 1 1 IP address 192 168 1 100 Subnet Mask 255 255 255 0 Default Gateway 192 168 1 1 ex2 If the address LAN IP of the Broadband Router is 192 168 0 1 IP address 192 168 0 100 Subnet Mask 255 255 255 0 Default Gateway 192 168 0 1 ex3 If the address LAN IP of the Broadband Router is 192 168 xxx 1 IP address 192 168 xxx 100 Subnet Mask 255 255 255 0 Default Gateway 192 168 xxx 1 D For the address of the Broadband Router refer to the product s documentation For more information about port forwarding of the broadband router refer to Port Range Forward Port Mapping Setup Page 38 English _31 network connection and setup BUTTONS USED IN IP INSTALLER a 2 3 4 5 IP Installer v2 0 1 2 for the
36. AIR OR CORRECTION 12 IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND OR REDISTRIBUTE DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program and you want it to be of the greatest possible use to the public the best way to achieve this is to make it free software which everyone can redistribute and change under these terms To do so attach the following notices to the program It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty and each file should have at least the copyright line and a pointer to where the full notice is found one line to give the program s name and an idea of what it does Copyright C yyyy name of author This program is free software you can redistribute it and or modify it under the terms of the GNU General Public License as published by the Free Software Foundation either version 2 of the License or
37. Activate the Alarm Out port 14 PTZ Control the pan tilt zoom operations of the camera 15 cs conex The left corner context menu will disappear but only the menu icon i n the WebViewer blue noises can appear at the corner of the video images English _47 YAMGIA GAM web viewer To capture the snapshot 1 Click Capture IEJ on the scene to capture 2 When a captured video is saved a notification message appears When using Internet Explorer the captured video is saved in My Computer My Documents Pictures In Mac OS it is saved in Pictures or Users user account Pictures 4 m f you encounter an interrupted video when capturing the image with IE8 on a Windows 7 based PC deselect Turn On Protected Mode from Tools Internet Options Security f the screen is not captured by IE browser in Windows 7 or 8 run the IE Browser with the Admin privilege How to record videos manually 1 Press Manual recording fe 2 To end the recording press Manual recording fe again Z Before starting the manual recording at lt Event gt lt Storage gt insert the SD card and change the SD card option to On To fit the full screen 1 Click the Full Screen BE button 2 This will fit the Viewer to the full screen 3 To exit the full screen mode press Esc on the keyboard D For the Internet Explorer and Google Chrome browser you can switch to the
38. E that is compliant with the IEEE802 3af protocols Be careful not to reverse the polarity when you connect the power cable m f you want to connect an external device you must turn off the external device before proceeding Connecting a connector cable SNF 8010VM Connect the M12 male connector into the hole of the M12 Female connector of the camera 4 This camera uses Female D coded types PoE Power over Ethernet is supported You are recommended to use a shielded network connector a Connect this camera to a shielded network cable STP RX TX Please use 4 poles Male D coded type external cables that meet the M12 specification m Check whether the PoE device is properly connected to the ground TX RX 22_ installation amp connection Making a connection using the M12 RJ45 conversion cable provided SNF 8010VM Connect the M12 male connector for the conversion cable to the groove of the M12 Female connector for your camera NOILOANNODO 8 NOILLVTIVLSNI Powering and networking SNF 8010VM Connect a camera to a PoE equipment or connect the provided M12 RJ45 connector for the conversion cable of your camera to a PoE equipment a Aconnection method may vary depending on the installation environment of a user Connect to a PoE Pow
39. GE Copyright c 2005 2010 Thomas BERNARD All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE The MIT Li
40. In G 711 PCM Bit Rate 64kbps Sampling Frequency 8kHz G 726 ADPCM Bit Rate 16Kbps 24Kbps 32Kbps 40Kbps Sampling Frequency 8kHz Audio Out G 711 PCM Bit Rate 64kbps Sampling Frequency 8kHz Full duplex Audio Audio in Mono signal line input Max 2 4 Vpop Audio out Mono signal line output Max 2 4 Vpop e Line out impedance 6000 English _25 Installation amp connection Connecting to the I O port box Connect the Alarm I O cable to the corresponding port of the port box THEN KELLA N i aq i m me o ieee i Sensor Alarm Warning lamp e ALARM IN Used to connect the alarm input sensor e ALARM OUT Used to connect the alarm output signal e GND Common terminal to connect alarm signals K m f devices e g flashing light and siren that exceed the voltage and current specifications are connected by using the open collector method it may cause malfunction Refer to the Alarm Out Wiring Diagram when connecting devices that exceed the voltage and current specifications page 27 26_ installation amp connection To connect the external sensor Connect one strand of each signal line 2 strand of the sensors to the ALARM IN port and connect the other strand to the GND port Alarm In Wiring Diagram External Inside of the camera connection VCC_3 3V RESISTOR RESIST
41. Instruction Set e Resolution 2048X1536 pixels or higher 32 bit color e RAM 2GB or higher e Supported OS Windows XP VISTA 7 8 MAC OS X 10 7 e Supported Browser Microsoft Internet Explorer Ver 8 1 1 Mozilla Firefox Ver 9 19 Google Chrome Ver 15 25 Apple Safari Ver 6 0 2 Mac OS X 10 8 10 7 only 5 1 7 Mac OS X only Windows 8 is supported only in the Desktop mode Neither a beta test version unlike the version released in the company website nor the developer version will be supported For IPv6 connection Window 7 or higher is recommended For Mac OS X only the Safari browser is supported e Video Memory 256MB or higher m m f the driver of the video graphic adapter is not installed properly or is not the latest version the video may not be played properly Fora multi monitoring system involving at least 2 monitors the playback performance can be deteriorated depending on the system RECOMMENDED MICRO SD SDHC SDXC MEMORY CARD SPECIFICATIONS e 4GB 64GB e For your camera we recommend you use a memory card from the following manufacturers Micro SD SDHC SDXC Memory Card Sandisk Transcend e t is recommended a memory card of specification Class 6 or higher is used 10 overview NAS RECOMMENDED SPECS e Recommended capacity 200GB or higher is recommended e Simultaneous access One unit of NAS can accept a maximum of sixteen camera accesses e e For this camera
42. L NECESSARY SERVICING REPAIR OR CORRECTION 16 INNO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library and you want it to be of the greatest possible use to the public we recommend making it free software that everyone can redistribute and change You can do so by permitting redistribution under these terms or alternatively under the terms of the ordinary General Public License To apply these terms attach the following notices to the library It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty and each file should have at least the copyright line and a pointer to where the full notice is found one line to give the library s name and an idea of what it does Copyright C year name of author This library
43. M Unit mm inch 3 4 8 1 2 HOLE 10 45 9 1 81 127 8 5 03 26 5 1 04 English _121 XIGNAddV aooendx TROUBLESHOOTING PROBLEM can t access the camera from a web browser SOLUTION e Check to make sure that the camera s Network settings are appropriate e Check to make sure that all network cables have been connected properly e f connected using DHCP verify that the camera is able to acquire dynamic IP addresses without any problem e lf the camera is connected to a Broadband Router verify that port forwarding is properly configured Viewer got disconnected during monitoring cannot connect to the system using a tab browser of Internet Explorer 7 0 The camera connected to the network is not detected in the IP installer program e Connected Viewers become disconnected upon any change to camera or network configurations e Check all network connections e f the camera is connected over an PPPoE network it s possible for Viewer to disconnect under poor network conditions e An error may be generated when connecting with a new window or tab since the cookie data are shared Do not use a new window or tab select File gt New session e Turn off the firewall settings on your PC and then search the camera again Images overlap e Check whether two or more cameras are set to a single multicast address instead of
44. NS page 79 Refer to IP amp Port for how to setup IP page 65 English _29 network connection and setup CONNECTING THE CAMERA DIRECTLY TO A PPPoE MODEM Camera External Remote PC DDNS Server Data Center KOREA 1 Connect the user PC directly with the network camera N Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet Use the Internet browser to connect to the web viewer Move to Setup page Move to Network DDNS and configure the DDNS settings Move to Basic IP amp Port Setup Page set the network type to PPPoE and enter the network service s ID and password O a Aa Q 7 Connect the camera which was removed from your PC directly to the modem 8 Restart the camera 4 For registering the DDNS settings refer to Registering with DDNS page 80 For configuring the DDNS settings refer to DDNS page 79 Refer to IP amp Port for how to setup IP page 65 30_ network connection and setup CONNECTING THE CAMERA TO A BROADBAND ROUTER WITH THE PPPoE CABLE MODEM This is for a small network environment such as homes SOHO and ordinary shops Camera INTERNET PPPoE or Cable Modem External Remote PC DDNS Server Data Center KORE
45. Name gt lt MAC Address gt D Inthe Mac operating system which support Bonjour by default the connected cameras are automatically displayed in the Bonjour bookmark of the Safari web browser If the Bonjour bookmark is not displayed check Bookmarks Setup in the Preference menu 6 When done click Apply English _87 Setup screen EVENT SETUP FTP E mail You can configure the FTP E mail server settings so that you can transfer the images taken with camera to your PC if an event occurs 1 From the Setup menu select the lt Event F gt tab 2 Click lt FTP E mail gt 3 Select lt FTP configuration gt or lt E mail configuration gt and enter select a desired value e FIP configuration Server address Enter the IP address of the FTP server that you transfer the alarm or event images to ID Enter the user ID with which you will log in to the FTP server Password Enter the user account password for logging into the FTP server Upload directory Specify the FTP path where you will transfer the alarm or event images Port The default port of the FTP server is 21 however you can use a different port number according to the FTP server settings Passive mode Select lt On gt if you need to connect in passive mode due to the firewall or the FTP server settings 88_ setup screen e E mail configuration Server address Enter the IP address of the email server t
46. Network EE gt tab 2 Click lt SNMP gt 3 Specify the lt SNMP gt e Enable SNMP v1 SNMP version 1 will be active e Enable SNMP v2c SNMP version 2 will be active Read community Provide the name of the read community where you can access to the SNMP information The default name is lt public gt Write community Provide the name of the write community where you can access to the SNMP information The default name is lt write gt English _85 Setup screen e Enable SNMP Trap SNMP trap is used to send important events and conditions to the Admin Community Enter the trap community name to receive messages IP address Enter the IP address to which messages will be sent Authentication failure It specifies whether an event shall be generated when the community information is invalid Network connection It specifies whether an event shall be generated when the network disconnection is restored e Enable SNMP v3 SNMP version 3 will be active Password Specify the default password for SNMP version 3 The default password is lt admin4321 gt The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product Note that the security and other related issues caused by the unchanged password shall be responsible for the user Password should be longer than 8 characters no more than 16 characters 4 When done
47. OR Sensor ALARM IN 5mA SINK RESISTOR TRANSISTOR NOILOANNODO 8 NOILLVTIVLSNI To connect the alarm out If devices e g flashing light and siren that exceed the voltage and current specifications are connected by using the open collector method it may cause malfunction Refer to the alarm out connection diagram below when connecting devices that exceed the voltage and current specifications Alarm Out Wiring Diagram External connection Inside of the camera Warning lamp DC 5V or 3 3V Siren power 10K ohm ALARM OUT 12VDC 20mA MAX RESISTOR Warning lamp i TRANSISTOR Siren English _27 network connection and setup You can set up the network settings according to your network configurations CONNECTING THE CAMERA DIRECTLY TO LOCAL AREA NETWORKING Connecting to the camera from a local PC in the LAN 1 Launch an Internet browser on the local PC 2 Enter the IP address of the camera in the address bar of the browser Camera Camera External Remote PC DDNS Server Data Center KOREA Local PC lt Local Network gt 4 A remote PC in an external Internet out of the LAN network may not be able to connect to the camera installed in the intranet if the port forwarding is not properly set or a firewall is set In this case to resolve the problem contact your network administrator Inthe IP installer you can use the initial passwo
48. P address of the NAS is valid e Confirm that the ID password of the NAS is valid e Confirm that you can access the folder designated as the default folder using the ID of the NAS e Confirm that the NAS SMB CIFS items are unchecked e Confirm that the NAS IP address and the camera IP address are in the same format ex The NAS amp camera subnet mask initial value is 255 255 255 0 lf the IP address is 192 168 20 32 then the NAS IP address should be in the range of 192 168 20 1 192 168 20 255 e Check whether you tried to access as another user without formatting the default folder saved or used e Confirm that you used recommended NAS equipment English _123 OPEN SOURCE LICENSE NOTIFICATION ON THE PRODUCT The software included in this product contains copyrighted software that is licensed under the GPL LGPL You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to help cctv samsung com If you want to obtain the complete Corresponding Source code in the physical medium such as CD ROM the cost of physically performing source distribution might be charged e GPL Software linux kernel uboot Sysvinit busybox 1 15 3 http www busybox net Net snmp 5 4 http www net snmp org dvsdk 2 10 01 18 e LGPL Software glilbc 2 0 http www gnu org software libc e BSD1 0 math linux http sourceforge net projects math lin
49. P gt and lt UDP Port gt for each connected camera to the Broadband Router Each port number for the Broadband Router should match that specified in lt Setup gt lt Basic gt lt IP amp Port gt from the camera s web viewer menu 3 When done click Save Settings Your settings will be saved Wireless G Broadband Router with Sp Applications amp Gaming Setup Port Range Forward Port Triggering 192 168 1 100 192 168 1 100 192 168 1 101 192 168 1 100 192 168 1 101 192 168 1 100 192 168 1 101 192 1681 0 192 1681 0 192 168 1 0 Save Settings Cancel Changes 4 Above sample instructions are based on the CISCO s Broadband Router The settings may differ depending on the connected Broadband Router model For more information refer to the user manual of the applicable router 38_ network connection and setup Setting up Port Range Forward for several network cameras When several network cameras are connected to one Broadband Router device you should forward the TCP 943 port of the router to the TCP 943 port of a connected camera a m f you don t set properly the TCP 943 port of the router you cannot get any video stream from the web page of the camera e TCP 948 port is a port for the Silverlight policy server of a camera e You can set a rule of Port F
50. PASSWORD SETTING When you access the product for the first time you must register the login password When the Password change window appears enter the new password New password Confirm new password u Anew password should be eight to fifteen letters long and a combination of at least two of uppercase lowercase alphabets numbers and special characters Special characters that are allowed _ Iff 2 You cannot use your ID as your password You cannot repeat same letters more than twice and you cannot use the three consecutive keyboard buttons YSAMAIA GAM m f you lost your password you can press the RESET button to initialize the product So don t lose your password by using a memo pad or memorizing it LOGIN Whenever you access the camera the login window appears Enter the User ID and password to access the camera 1 Enter admin in the lt User name gt WindowsSecurty CO input box The server 192 168 1 100 at iPolis requires a username and password The administrator ID admin is fixed and can not be changed pq Hsername 2 Enter the password in the lt Password gt w ia z Ea input field 3 Click OK If you have logged in successfully you will the Live Viewer screen m When you access the camera web viewer pay special attention to the security by checking whether the image data is encrypted D m f you ch
51. SP without logging in and view the video e Current users If you select lt Use gt you can set or change the user permissions The manager can set up audio input output and alarm output Profile If you select lt Default gt you can only see the default profile video if selecting lt All gt you can see the full profile videos m ONVIF functions available to a registered user allowed to use ONVIF functions are limited to those of granted with permission m Video Transfer and Changing Video Information Set the profile to lt All gt and set Audio Input and Audio Output m Video Transfer Changing Video Information Alarm Output Set the profile to lt All gt and select at your preference for the rest 4 When done click Apply English _63 NJJY0S dNLAS Setup screen Date amp Time 1 From the Setup menu select the lt Basic gt tab 2 Click lt Date amp Time gt 3 Specify the time and date that will be applied to the camera e Current system time Displays the current time settings of your system e Timezone Specify the local time zone based on the GMT e Use daylight saving time If checked the time will be set one hour before the local time zone for the specified time period This option will be displayed only in areas where DST is applied e System time setup Specify the time and date that will be applied to your system Manual Specify the time manually Synchron
52. TE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE This product includes cryptographic software written by Eric Young eay cryptsoft com This product includes software written by Tim Hudson tijh cryptsoft com Original SSLEAY License Copyright C 1995 1998 Eric Young eay cryptsoft com All rights reserved This package is an SSL implementation written by Eric Young eay cryptsoft com The implementation was written so as to conform with Netscapes SSL This library is free for commercial and non commercial use as long as the following conditions are aheared to The following conditions apply to all code found in this distribution be it the RC4 RSA lhash DES etc code not just the SSL code The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson tjnh cryptsoft com Copyright remains Eric Young s and as such any Copyright notices in the code are not to be removed If this package is used in a product Eric Young should be given attribution as the author of the parts of the library used This can be in the form of a textual message at program startup or in documentation online or textual provid
53. UBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS PHP License The PHP License version 3 01 Copyright c 1999 2012 The PHP Group All rights reserved Redistribution and use in source and binary forms with or without modification is permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 The name PHP must not be used to endorse or promote products derived from this software without prior written permission For written permission please contact group php net 4 Products derived from this software may not be called PHP nor may PHP appear in their name without prior written permission from group php net You may indicate that your software works in conjunction with PHP by saying Foo for PHP instead of calling it PHP Foo or phpfoo 5 The PHP Group may publish revised and or new versions of the license from time to time Each version will be given a distinguishing version number Once covered code has been published under a particular version of the license you may always continue to use it under the terms of that version You may also choose
54. Wall mounted Ceiling mounted and Floor Standing modes 5 When done click Apply m When you change the Camera Mounting mode the camera reboots automatically English _71 Setup screen Audio setup You can configure the I O settings of the audio source from the camera 1 From the Setup menu select the lt Video amp Audio EJ gt tab 2 Click lt Audio setup gt 3 Set the audio input value e Source Sets the audio input Line Connect the cable to the audio device Internal microphone Microphone that is built in in the camera It is applicable only to the SNF 8010 model External microphone 3 5 pi jack type external MIC e Apply power to Ext Mic If the external microphone connected has no separate power supply check this option to set camera to supply power to the connected external microphone The option is enabled if lt External microphone gt is selected e Codec Specify the audio codec G 711 A audio codec standard it uses 64 Kbps PCM Pulse Code Modulation encoding ITU standard audio codec that is adequate for digital voice transfer in PSTN network or through a PBX G 726 ITU standard audio codec applying ADPCM Adaptive Differential Pulse Code Modulation for variable bit rates of 40 82 24 16 Kops to 64 Kops PCM encoding e Bitrate Set the bit rate to differentiate compression ratio if using G 726 codec e Gain Specify the audio input amplificati
55. Y THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE This software consists of voluntary contributions made by many individuals on behalf of the PHP Group The PHP Group can be contacted via Email at group php net For more information on the PHP Group and the PHP project please see lt http www php net gt PHP includes the Zend Engine freely available at lt http www zend com gt This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense Samsung Techwin cares for the environment at all product manufacturing stages and is Cc p taking measures to provide customers with more environmentally friendly products eco The Eco mark represents Samsung Techwin s devotion to creating environmen
56. a Memory Usage This is the memory utilization rate for each application CPU Usage This is the CPU utilization rate for each application Thread count This is the number of threads created by each application Duration This is the total execution time of each application Kill Task Terminates an application Total Usage This is the total resource occupation rate of the camera including main tasks and applications For questions about application use or installation check the Techwin developer website English _111 Setup screen VIEWING PROFILE INFORMATION Profile access You can check the profile information 1 Click Status EA on the live screen Sictwoi CAMERA WESVIEWER 2 The profile information screen is og Bere O 300 oe displayed e Profile access Show the information of the newly added profile Profile Show the information of the newly added codec Bitrate kbps Show both the actual bit rate and the set bit rate Framerate fos Show both the actual frame rate and the set frame rate ATC Show the ATC status Concurrent users count Show the number of concurrent users who access the profile e Current users Shows information on users accessing web viewer and displaying monitoring video Profile Show the name of the profile accessed by the user Bitrate kbps Show the current bit rate Network connection status It shows whe
57. a work based on the library and a work that uses the library The former contains code derived from the library whereas the latter must be combined with the library in order to run TERMS AND CONDITIONS FOR COPYING DISTRIBUTION AND MODIFICATION 0 This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License also called this License Each licensee is addressed as you A library means a collection of software functions and or data prepared so as to be conveniently linked with application programs which use some of those functions and data to form executables The Library below refers to any such software library or work which has been distributed under these terms A work based on the Library means either the Library or any derivative work under copyright law that is to say a work containing the Library or a portion of it either verbatim or with modifications and or translated straightforwardly into another language Hereinafter translation is included without limitation in the term modification Source code for a work means the preferred form of the work for making modifications to it For a library complete source code means all the source code for all modules it contains plus any associated inter
58. a Rectangle zones Privacy Masking Off On 32 Zones with Rectangle Gain Control Off Low Medium High White Balance ATW AWC Manual Indoor Outdoor Included Mercury Electronic Shutter Speed 2 1 12 000sec Digital Zoom 16x Digital PTZ Preset Group Flip Mirror Off On Intelligent Video Analytics Alarm 1 0 Tampering Audio Detection Input 1ea Output 1ea 114_ appendix Description Items SNF 8010 SNF 8010VM Audio In Selectable Mic IN Line IN Supply voltage 2 5VDC 4mA Input impedance approx 2K Ohm 2 i is U am O aN a aln Line out 3 5mm stereo mini m Audio out jack ack 5 Max output Level 1Vrms J x Alanna T Motion detection Tampering Audio Detection Alarm Input 99 Network Disconnection e File upload via FTP and E Mail Operational e Notification via E Mail TCP and HTTP Alarm events Local storage SD SDHC SDXC recording at Network disconnected amp Event Alarm Triggers e External output Camera 360 view Single Panorama Double Panorama Quad view Single Rectangle View Composition CMS 360 view Single Panorama Double Panorama Quad view Single Rectangle 360 3Rectangle Single Panorama 2Rectangle Ethernet ee ae Connector Type Network Female Type Video Compression Format H 264 MPEG 4 Part 10 AVC Motion JPEG English _115 aooendix Resolution Description SNF 8010 SNF 8010VM lt 5 2M O
59. address by the DHCP server If connecting the camera directly to modem using the DHCP protocols If IPs are assigned by the internal DHCP server via the LAN Checking the Dynamic IP 1 Run the IP Installer on the user s local Se ne zeae computer a re i Mode A ame ait de Cameras allocated with lt Dynamic IP gt address are shown in the list 2 Select a camera from the search result 3 Click the Manual Set button and check the camera s lt Dynamic IP gt Scan I item IPy4 m PVS Search Auto Se address If you uncheck lt DHCP3 gt you can Manual setting change IP to lt Static gt elem e DHCP C STATIC ar Pot 0 MAC Address 00 09 18 30 A7 60 VNP Port 520 IP Address jk a Ls a a Cal Subnet Mask 255 255 25 O Gateway Ln a Password is Cancel English _37 dN13S ANY NOILOANNOO MYOMLAN network connection and setup PORT RANGE FORWARD PORT MAPPING SETUP If you have installed a Broadband Router with a camera connected you must set the port range forwarding on the Broadband Router so that a remote PC can access the camera in it Manual Port Range Forwarding 1 From the Setup menu of the Broadband Router select lt Applications amp Gaming gt lt Port Range Forward gt For setting the port range forward for a third party Broadband Router refer to the user guide of that Broadband Router 2 Select lt TC
60. anged Only scheduled time Check if an alarm occurs at a specified day of the week for a specified time period It activates in operated mode when the alarm occurs Clear Reset all settings Minute Click an area in Activation Time and set the time by minutes eae dow menuei ae Hour Drag your mouse at Activation Time and set the time by hours 00 To11 Y The transfer interval setting value must be smaller than the preset activation interval OAE EEEE to succeed in image transmission E English _97 Setup screen 6 Specify an operation that will perform if an alarm occurs e FIP Specify the use of FTP transfer in the alarm input setup Refer to FTP E mail for more details page 88 e E mail Specify the use of email transfer in the alarm input setup Refer to FTP E mail for more details page 88 e Record Specify the use of recording in the alarm input setup Set lt Record gt to lt On gt in lt Storage gt page 89 e Alarm output Select whether to set the alarm output if an alarm is incoming and specify the alarm output time 7 When done click Apply HEE 98_ setup screen Time schedule You can set to save the video data at a certain interval as scheduled regardless of the actual occurrence of the event 1 a A WwW N Click lt Time schedule gt Set whether or not to lt Enable gt Specify the lt Transfer inter
61. ary form with the major components compiler kernel and so on of the operating system on which the executable runs unless that component itself accompanies the executable If distribution of executable or object code is made by offering access to copy from a designated place then offering equivalent access to copy the source code from the same place counts as distribution of the source code even though third parties are not compelled to copy the source along with the object code 4 You may not copy modify sublicense or distribute the Program except as expressly provided under this License Any attempt otherwise to copy modify sublicense or distribute the Program is void and will automatically terminate your rights under this License However parties who have received copies or rights from you under this License will not have their licenses terminated so long as such parties remain in full compliance 5 You are not required to accept this License since you have not signed it However nothing else grants you permission to modify or distribute the Program or its derivative works These actions are prohibited by law if you do not accept this License Therefore by modifying or distributing the Program or any work based on the Program you indicate your acceptance of this License to do so and all its terms and conditions for copying distributing or modifying the Program or works based on it 6 Each time you redistribut
62. as within a Broadband Router s network by using the camera s DDNS URL 1 Before you can access a camera in the Broadband Router network you should have set the port range forward for the Broadband Router 2 From the remote PC launch the Internet browser and type the DDNS URL address of the camera or the IP address of the Broadband Router in the address bar ex http www samsungipolis com Product ID 4 For registering the DDNS settings refer to Registering with DDNS page 80 40_ network connection and setup web viewer CONNECTING TO THE CAMERA Normally you would 1 Launch the Internet browser AS hitp 192 168 1 100 X 192 168 1 100 2 Type the IP address of the camera in the address bar ex IP address IPv4 192 168 1 100 eee gt http 192 168 1 100 the Login dialog should appear w IP address IPV6 2001 230 abcd ote ffff 0000 0000 fff 11114 gt http 2001 230 abca ffff 0000 0000 ffff 1111 the Login dialog should appear If the HTTP port is other than 80 1 Launch the Internet browser 2 Type the IP address and HTTP port number of the camera in the address bar ex IP address 192 168 1 100 HTTP Port number 8080 gt http 192 168 1 100 8080 the Login dialog should appear Using URL 1 Launch the Internet browser 2 Type the DDNS URL of the camera in the address bar ex URL address
63. bdividing an organization or merging organizations If propagation of a covered work results from an entity transaction each party to that transaction who receives a copy of the work also receives whatever licenses to the work the party s predecessor in interest had or could give under the previous paragraph plus a right to possession of the Corresponding Source of the work from the predecessor in interest if the predecessor has it or can get it with reasonable efforts You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License For example you may not impose a license fee royalty or other charge for exercise of rights granted under this License and you may not initiate litigation including a cross claim or counterclaim in a lawsuit alleging that any patent claim is infringed by making using selling offering for sale or importing the Program or any portion of it 11 Patents A contributor is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based The work thus licensed is called the contributor s contributor version A contributor s essential patent claims are all patent claims owned or controlled by the contributor whether already acquired or hereafter acquired that would be infringed by some manner permitted by this License of making using or selling its contributor version but do not inc
64. bution medium accompanied by a written offer valid for at least three years and valid for as long as you offer spare parts or customer support for that product model to give anyone who possesses the object code either 1 a copy of the Corresponding Source for all the software in the product that is covered by this License on a durable physical medium customarily used for software interchange for a price no more than your reasonable cost of physically performing this conveying of source or 2 access to copy the Corresponding Source from a network server at no charge c Convey individual copies of the object code with a copy of the written offer to provide the corresponding Source This alternative is allowed only occasionally and noncommercially and only if you received the object code with such an offer in accord with subsection 6b d Convey the object code by offering access from a designated place gratis or for a charge and offer equivalent access to the Corresponding Source in the same way through the same place at no further charge You need not require recipients to copy the Corresponding Source along with the object code If the place to copy the object code is a network server the Corresponding Source may be on a different server operated by you or a third party that supports equivalent copying facilities provided you maintain clear directions next to the object code saying where to find the Corresponding Source Rega
65. ce you to infringe any patents or other property right claims or to contest validity of any such claims this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system it is up to the author donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License 12 If the distribution and or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries so that distribution is permitted only in or among countries not thus excluded In such case this License incorporates the limitation as if written in the body of this License 13 The Free Software Foundation may publish revised and or new versions of the Lesser General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version numb
66. cense Copyright c 1996 by Internet Software Consortium Copyright c 2005 2010 Sam Stephenson Permission is hereby granted free of charge to any person obtaining a copy of this software and associated documentation files the Software to deal in the Software without restriction including without limitation the rights to use Copy modify merge publish distribute sublicense and or sell copies of the Software and to permit persons to whom the Software is furnished to do so subject to the following conditions THE SOFTWARE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM DAMAGES OR OTHER LIABILITY WHETHER IN AN ACTION OF CONTRACT TORT OR OTHERWISE ARISING FROM OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE libxml2 License Except where otherwise noted in the source code e g the files hash c list c and the trio files which are covered by a similar licence but with different Copyright notices all the files are Copyright C 1998 2003 Daniel Veillard All Rights Reserved Permission is hereby granted free of charge to any person obtaining a copy of this software and associated documentation files the Software to deal in the Software with
67. d work material governed by the terms of that license document provided that the further restriction does not survive such relicensing or conveying If you add terms to a covered work in accord with this section you must place in the relevant source files a statement of the additional terms that apply to those files or a notice indicating where to find the applicable terms Additional terms permissive or non permissive may be stated in the form of a separately written license or stated as exceptions the above requirements apply either way 8 Termination You may not propagate or modify a covered work except as expressly provided under this License Any attempt otherwise to propagate or modify it is void and will automatically terminate your rights under this License including any patent licenses granted under the third paragraph of section 11 However if you cease all violation of this License then your license from a particular copyright holder is reinstated a provisionally unless and until the copyright holder explicitly and finally terminates your license and b permanently if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation Moreover your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you ofthe violation by some reasonable means this is the first time you have received notice of violation of t
68. ditions and the following disclaimer N Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the following acknowledgement This product includes software developed by the Computer Science Department at University College London 4 Neither the name of the University nor of the Department may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Copyright c 2004 Jan Kneschke incremental All rights reserved
69. duct information 1 From the Setup menu select the lt System EJ gt tab 2 Click lt Product information gt 3 Check the camera information or provide details according to your network environment NJJY0S dNLAS Model Model name of the product Serial number Product serial number Device name Provide a device name that will be displayed on the Live screen Location Specify the location where the camera is installed Description Provide detailed information about the camera location Memo Provide an explanation about the camera for better understanding Language Select a preferred language for the Web Viewer OSD 4 m The default language is set to lt English gt 4 When dore click Apply Jh English _107 Setup screen Upgrade Reboot 1 From the Setup menu select the lt System E gt tab 2 Click lt Upgrade Reboot gt 3 Select a desired item and set it appropriately e Upgrade Performs upgrading the system e Factory default Resets the system to the factory default Except network parameter Reset the other settings except for Network settings All Resets all settings including the camera settings however the log information will not be reset The IP addressing system will be defaulted to DHCP if you reset the camera If no DHCP server is found the previous settings will be restored automatically e Configuration backup amp Restore Back
70. during execution displays copyright notices you must include the copyright notice for the Library among them as well as a reference directing the user to the copy of this License Also you must do one of these things a Accompany the work with the complete corresponding machine readable source code for the Library including whatever changes were used in the work which must be distributed under Sections 1 and 2 above and if the work is an executable linked with the Library with the complete machine readable work that uses the Library as object code and or source code so that the user can modify the Library and then relink to produce a modified executable containing the modified Library It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions b Use a suitable shared library mechanism for linking withthe Library A suitable mechanism is one that 1 uses at run time a copy of the library already present on the user s computer system rather than copying library functions into the executable and 2 will operate properly with a modified version of the library if the user installs one as long as the modified version is interface compatible with the version that the work was made with c Accompany the work with a written offer valid for at least three years to give the same user the materials sp
71. e DDNS service 5 When done click Apply m m f selected lt Quick connect gt be sure to select Samsung DDNS service English _79 Setup screen Registering with DDNS To register your product with the Samsung DDNS 1 Visit the iPOLIS web site SIGN UP CJ HOME gt Membership gt SIGN UP www samsungipolis com and sign in Welcome to the IPOLIS website We offer various services for users of Samsung iPOLIS network products To use the services please register first with a registered account Thoms of Sere Terms of Service and Membership Agreement Chapter 1 Parties and Recitals 1 1 Purpose of Terms of Service The following terms and conditions govern the POLIS Membership www samsungipolis co kr provided by Samsung Techwin Limited Company the Company and the benefits available thereunder the Service 1 2 Effectuation and Revision of Terms of Service 1 2 1 This Terms of Service will be effective by announcement on the Service or notification through email to the individual Member 1 2 2 The Company may revise this agreement without prior notice to the Members in case of crucial situation and the revised terms and conditions will be effective with notification in the same manner described in 1 2 1 1 2 3 If any Member in disagreement with the revised terms and conditions can request disenrollment otherwise the Comnanvy will treat Member s use as accentance of the revised terms and conditions since
72. e cable with a dense layer of taping Waterproof butyl tape is made of butyl rubber that can be stretched to twice its normal length 18_ installation amp connection INSERTING REMOVING A MICRO SD MEMORY CARD Disconnect the power cable from the camera before inserting the Micro SD memory card Do not insert the Micro SD memory card while it s upside down by force Otherwise it may damage the Micro SD memory card Inserting a Micro SD Memory Card Push the Micro SD memory card in the direction of the arrow shown in the diagram NOILOANNODO 8 NOLLVTIVLSNI Removing a Micro SD Memory Card Gently press down on the exposed end of the memory card as shown in the diagram to eject the memory card from the slot English _19 Installation amp connection w Pressing too hard on the Micro SD memory card can cause the card to shoot out uncontrollably from the slot when released Before removing your Micro SD memory card turn off the camera or go to lt Storage gt turn the device off and press the Apply button Page 89 m f you turn off the camera or remove the Micro SD memory card that contains data from the product the data may be lost or damaged MEMORY CARD INFORMATION NOT INCLUDED What is a memory card The memory card is an external data storage device that has been developed to offer an entirely new way to record and share video audio and text data using digital devices Selectin
73. e source code or can get it if you want it that you can change the software or use pieces of it in new free programs and that you know you can do these things To protect your rights we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights These restrictions translate to certain responsibilities for you if you distribute copies of the software or if you modify it For example if you distribute copies of such a program whether gratis or for a fee you must give the recipients all the rights that you have You must make sure that they too receive or can get the source code And you must show them these terms so they know their rights We protect your rights with two steps 1 copyright the software and 2 offer you this license which gives you legal permission to copy distribute and or modify the software Also for each author s protection and ours we want to make certain that everyone understands that there is no warranty for this free software If the software is modified by someone else and passed on we want its recipients to know that what they have is not the original so that any problems introduced by others will not reflect on the original authors reputations Finally any free program is threatened constantly by software patents We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses in effect making the pr
74. e the Program or any work based on the Program the recipient automatically receives a license from the original licensor to copy distribute or modify the Program subject to these terms and conditions You may not impose any further restrictions on the recipients exercise of the rights granted herein You are not responsible for enforcing compliance by third parties to this License 7 If as a consequence of a court judgment or allegation of patent infringement or for any other reason not limited to patent issues conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of this License If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not distribute the Program at all For example if a patent license would not permit royaltyfree redistribution of the Program by all those who receive copies directly or indirectly through you then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program If any portion of this section is held invalid or unenforceable under any particular circumstance the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances It is not the purpose of this section to induce you to
75. ea 1 Select lt Sensitivity gt tab to set the sensitivity level You can set the sensor s sensitivity to detect a motion out of the background from the monitoring video m m n a situation that definitely distinguishes objects out of backgrounds set this to a low sensitivity level For opposite case that is hard to distinguish objects like low illuminated situation set this to a high level 2 Select lt Size gt tab You can limit the minimum maximum size of motion to be detected e Minimum size To set the minimum size of detected motions select lt Minimum size gt and then point and drag to the desired size on the screen using the mouse E e Maximum size To set the maximum iji size of detected motions select aa lt Maximum size gt and then point and drag to the desired size on the screen with your mouse Clear s Hour m Motions smaller than the specified minimum size or bigger than the maximum size are not detected To avoid unintended detections caused by great and small noises set minimum maximum motion sizes appropriately in accordance to your environments Note that same motions on the same location can be differently detected in their detection size it is recommended to consider and include the tolerable difference when setting the minimum maximum detection sizes English _103 N3JJY0S dNLAS Setup screen 3 Select lt Area gt tab iby sane E monitoring P
76. ecified in Subsection 6a above for a charge no more than the cost of performing this distribution d If distribution of the work is made by offering access to copy from a designated place offer equivalent access to copy the above specified materials from the same place e Verify that the user has already received a copy of these materials or that you have already sent this user a copy For an executable the required form of the work that uses the Library must include any data and utility programs needed for reproducing the executable from it However as a special exception the materials to be distributed need not include anything that is normally distributed in either source or binary form with the major components compiler kernel and so on of the operating system on which the executable runs unless that component itself accompanies the executable It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system Such a contradiction means you cannot use both them and the Library together in an executable that you distribute 7 You may place library facilities that are a work based on the Library side by side in a single library together with other library facilities not covered by this License and distribute such a combined library provided that the separate distribution of the work based on the Library and of the other library
77. eck the Remember my credentials option when your input is done in future you will be logged in automatically without being prompted to enter the login information You will experience the best video quality if the screen size is 100 Reducing the ratio may cut the image on the borders English _43 web viewer INSTALLING STW WebViewer PLUGIN If connecting to a camera for the first time you will see the installation message Then install the required WebViewer Plugin to access the camera and control the video from it in real time 1 When the monitoring page is accessed Go hitp 192 168 0 211 home webview O B X G SAMSUNG NETWORK CA X for the very first time the installation ROTI page is displayed Click Click Here to aissa begin installation m m f the plug in installation file download status is suspended at 99 in the Internet Explorer browser retry it after selecting Release SmartScreen filter in Tool gt SmartScreen filter 2 Click Run in the message window 3 Click Yes when the notice window STwWebViewsr for Windows 10 53 Saup saying that all browser windows will be closed e All browser windows will be closed Do you want to proceed 4 When the old version of the Web Viewer Plug in is installed a notice window saying the old version will be deleted is STWWebViewer for Windows 1 0 93 will be uninstalled displayed Click Yes
78. ect lt White balance gt White balance 2 Select lt Mode gt mode Red gain e ATW Corrects the colors of the Sige Z camera video automatically Manual You can adjust the red and blue gains of the camera video manually AWC Corrects the colors of the camera video to be optimized to the current lighting condition and screen mode To obtain the optimal condition for the current lighting put the focus of the camera to a white paper and press the Set button If the lighting environment is changed you should readjust the settings accordingly Outdoor Automatically corrects the video colors of the camera to be optimized to the outdoor environment Indoor Automatically corrects the video colors of the camera to be optimized to the indoor environment In AWC mode click the Set button if you want to keep the white balance level of the current image The white balancing may not work properly in the following conditions If this is the case switch to AWC mode lf the surrounding condition of the object is out of the temperature correction range ex Clear sky sunset lf the surrounding of the object is dark lf the focus of the camera directly faces the florescent lighting or if the camera is installed in a place of variable illumination the white balancing operation may be unstable 74_ setup screen To Set BLC You can specify a desired area on the video manually and set the area to be displayed
79. ed with the package Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the following acknowledgement This product includes cryptographic software written by Eric Young eay cryptsoft com The word cryptographic can be left out if the rouines from the library being used are not cryptographic related 4 If you include any Windows specific code or a derivative thereof from the apps directory application code you must include an acknowledgement This product includes software written by Tim Hudson tijn cryptsoft com THIS SOFTWARE IS PROVIDED BY ERIC YOUNG AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF S
80. egistered product ID with the DDNS site 3 Click Apply EZA When the connection is successfully made you will see the message of lt Success gt on the screen N3JY0S dNLAS Configuring public DDNS in Camera Settings 1 Open the DDNS settings page and select lt Public DDNS gt for lt DDNS gt 2 Enter the corresponding site s host name user name and password 3 Click Apply EZH button If the connection properly establishes lt Success gt appears 4 When done click Apply 4 To use DDNS service properly both DDNS setup and the router s port forwarding setup are required For port forwarding setup refer to Port Range Forward Port Mapping Setup page 38 English _81 Setup screen IP filtering You can create a list of IPs that you want to grant or deny access to them 1 From the Setup menu select the lt Network E gt tab 2 Click lt IP filtering gt 3 Select lt Filtering type gt e Deny If selecting this access from those IPs that are added to the filtering will be restricted e Allow If selecting this access from only those IPs that are added to the filtering will be accepted 4 Click the Add EZE button The IP list will be created 5 Provide the IP that you want to grant or deny access from When you enter an IP address and a Prefix the list of IP addresses available will appear in the right side filter range column 4
81. er If the Library specifies a version number of this License which applies to it and any later version you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation If the Library does not specify a license version number you may choose any version ever published by the Free Software Foundation 14 If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these write to the author to ask for permission For software which is copyrighted by the Free Software Foundation write to the Free Software Foundation we sometimes make exceptions for this Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally NO WARRANTY 15 BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE THERE IS NO WARRANTY FOR THE LIBRARY TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE LIBRARY AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU SHOULD THE LIBRARY PROVE DEFECTIVE YOU ASSUME THE COST OF AL
82. er over Ethernet enabled router s PoE connector Use PoE Power over Ethernet that is compliant with the IEEE802 3af protocols You can only use a Mode A PoE device that supplies power through data pin pair 1 2 3 6 Even if you use the M12 RJ45 conversion cable provided you can only use a mode A type PoE equipment that supplies power to data pair pins 1 2 3 6 English _23 Installation amp connection Power Cable Specification for Each Model In case of DC 12V Input Cable Length Max 60m Network Cable Specification Item Contents Remark Connector RJ45 Ethernet 10 100Base T 10 100 Mbps Cable UTP Category 5e Max Distance 100M PoE Support IEEE 802 3af 24_ installation amp connection Connecting to Audio Input Output e EY Speaker Z INS Le Speaker NOILOANNODO 8 NOILLVTIVLSNI Amp Microphone 1 Connect the AUDIO IN port of the camera with the microphone or LINE OUT port of the amplifier that the microphone is connected to Z As a microphone is built in you can use the built in microphone instead of an external one It is applicable only to the SNF 8010 model N Connect the AUDIO OUT port of the camera with the speaker or LINE IN port of the amplifier that the speaker is connected to 3 Check the specifications for audio input Audio Codec Audio
83. erms of this License with terms a Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License or b Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it or c Prohibiting misrepresentation of the origin of that material or requiring that modified versions of such material be marked in reasonable ways as different from the original version or d Limiting the use for publicity purposes of names of licensors or authors of the material or e Declining to grant rights under trademark law for use of some trade names trademarks or service marks or f Requiring indemnification of licensors and authors of that material by anyone who conveys the material or modified versions of it with contractual assumptions of liability to the recipient for any liability that these contractual assumptions directly impose on those licensors and authors All other non permissive additional terms are considered further restrictions within the meaning of section 10 If the Program as you received it or any part of it contains a notice stating that it is governed by this License along with a term that is a further restriction you may remove that term If a license document contains a further restriction but permits relicensing or conveying under this License you may add to a covere
84. ethods procedures authorization keys or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification has been made If you convey an object code work under this section in or with or specifically for use in a User Product and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term regardless of how the transaction is characterized the Corresponding Source conveyed under this section must be accompanied by the Installation Information But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product for example the work has been installed in ROM The requirement to provide Installation Information does not include a requirement to continue to provide support service warranty or updates for a work that has been modified or installed by the recipient or for the User Product in which it has been modified or installed Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for c
85. face definition files plus the scripts used to control compilation and installation of the library Activities other than copying distribution and modification are not covered by this License they are outside its scope The act of running a program using the Library is not restricted and output from such a program is covered only if its contents constitute a work based on the Library independent of the use of the Library in a tool for writing it Whether that is true depends on what the Library does and what the program that uses the Library does 1 You may copy and distribute verbatim copies of the Library s complete source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty keep intact all the notices that refer to this License and to the absence of any warranty and distribute a copy of this License along with the Library You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for a fee 2 You may modify your copy or copies of the Library or any portion of it thus forming a work based on the Library and copy and distribute such modifications or work under the terms of Section 1 above provided that you also meet all of these conditions a The modified work must itself be a software library b You must cause the files modified to car
86. facilities is otherwise permitted and provided that you do these two things a Accompany the combined library with a copy of the same work based on the Library uncombined with any other library facilities This must be distributed under the terms of the Sections above b Give prominent notice with the combined library of the fact that part of it is a work based on the Library and explaining where to find the accompanying uncombined form of the same work 8 You may not copy modify sublicense link with or distribute the Library except as expressly provided under this License Any attempt otherwise to copy modify sublicense link with or distribute the Library is void and will automatically terminate your rights under this License However parties who have received copies or rights from you under this License will not have their licenses terminated so long as such parties remain in full compliance 9 You are not required to accept this License since you have not signed it However nothing else grants you permission to modify or distribute the Library or its derivative works These actions are prohibited by law if you do not accept this License Therefore by modifying or distributing the Library or any work based on the Library you indicate your acceptance of this License to do so and all its terms and conditions for copying distributing or modifying the Library or works based on it 10 Each time you redistribute the
87. formation to the user program 1 From the Setup menu select the lt Video amp Audio EJ gt tab 2 Click lt Dewarping mode gt 3 Set lt Camera Mounting Mode gt e Ceiling Select this for ceiling mounted cameras e Ground Select this for cameras placed on the floor e Wall Select this for cameras placed on the wall NJJY0S dNLIS 4 Set lt Views gt e Quad View Shows four Single Rectangle screens at the same time However Quad View does not support DPTZ at Monitoring It does not allow the image reversion or zoom for a selected area at lt DPTZ setup gt Quad View is available in Wall mounted Ceiling mounted and Floor Standing modes e Double Panorama Shows the calibrated video images of the 360 wrap around view of the areas that are valid for Wall mounted and Ceiling mounted modes Can set the initial position at the Setup menu Can flip images horizontally through lt DPTZ setup gt Available in Wall mounted and Ceiling mounted modes e Single Panorama Shows the calibrated video images of the 360 wrap around view of the areas that are valid for Wall mounted mode Can set the initial position at the Setup menu but does not support the DPTZ function Available in Wall mounted mode e Single Rectangle Calibrates a specific scene to be optimized for a viewer Can adjust DPTZ at Monitoring and allows the image reversion or zoom for a selected area at lt DPTZ setup gt Available in
88. fter that the existing logs will be deleted from the oldest one each time a new log is created 110_ setup screen Open SDK A user can install an application on their camera to execute additional functions 1 From the Setup menu select the lt System EJ gt tab 2 Click lt Open SDK gt 3 Click the Browse EZ button to select the cap file from the user folder 4 Click the Install IE button to install your application 5 The information of the installed N3aYOS dNLAS application is displayed in the list iY Uninstall Deletes installed or operating applications Go App Move to the web page of each application Start Execute an installed application Stop Terminates a running application Health Displays the currently running application s resource occupation rate thread counts and execution time etc Priority Sets the priority of running applications If the total resource utilization rate of the camera including main tasks and applications exceeds 80 an ongoing application will be forced to stop In this case the priority set by the user is used to determine which application should be stopped first Auto start When the camera s power supply or main task is running a certain application for which auto execution has been activated will run automatically Task manager This displays the resource occupation rate of an application currently running in your camer
89. full screen To Use Audio 1 Click Audio EJ icon to activate audio communication 2 Use E bar to control the volume Z m f there is no sound from pulling in and out the audio jack while it is in operation click the Audio IEI icon to enable it again 48_ web viewer To Use Microphone Click Mic E icon to activate the microphone To control the PTZ 1 Press the PTZ f tab 2 Adjust the direction of the camera by controlling the cursor J of the screen moving pad or control the zoom or focus 1g For further details on PTZ use refer to DPTZ setup page 67 To run a sequence Run a saved preset e PH Run a saved group Refer to To set a group for details of group setting page 69 E Run a saved home position Refer to To add the home position for details of home position setting page 68 4 To use the sequence function at Sequence lt Dewarping mode gt select the lt Single a Rectangle gt view and then go to lt DPTZ setup gt and select the Preset option and Select preset Group English _49 YAMAIA GAM web viewer PLAYING THE RECORDED VIDEO D Before you can play the video you must configure the record settings For details on record settings refer to Storage page 89 Name of event search screen and its function JN Item 1 Search range setting 2 Search event setting
90. g a memory card that s suitable for you Your camera supports Micro SD SDHC SDXC memory cards You may however experience compatibility issues depending on the model and make of the memory card For your camera we recommend you use a memory card from the following manufacturers Micro SD SDHC SDXC Memory Card Sandisk Transcend Memory cards of 4GB 64GB is recommended for using with this camera Playback performance can be affected depending on the speed of memory card so use the high speed memory card It is recommended a memory card of specification Class 6 or higher is used Memory Card Components Micro SD SDHC SDXC 20_ installation amp connection CONNECTING WITH OTHER DEVICE lt SNF 8010VM gt English _21 NOILOANNODO 8 NOILLVTIVLSNI Installation amp connection Ethernet Connection Connect the Ethernet cable to the local network or to the Internet Power Supply Use the screwdriver to connect each line of the power cable to the corresponding power port of the camera m m f both PoE and DC12V are applied simultaneously the product will be supplied with power from PoE Youcan also use a router featuring PoE to supply power to the camera Use Po
91. h is the covered work but the special requirements of the GNU Affero General Public License section 13 concerning interaction through a network will apply to the combination as such 14 Revised Versions of this License The Free Software Foundation may publish revised and or new versions of the GNU General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Program specifies that a certain numbered version of the GNU General Public License or any later version applies to it you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation If the Program does not specify a version number of the GNU General Public License you may choose any version ever published by the Free Software Foundation If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used that proxy s public statement of acceptance of a version permanently authorizes you to choose that version for the Program Later license versions may give you additional or different permissions However no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version 15 Disclaimer of Warranty
92. hat you transfer the alarm or event images to Use authentication Select whether to use authorization Use SSL Specify the use of SSL ID Enter the user ID for logging into the email server Password Enter the user account password for logging into the email server Port The default port of the email server is 25 however you can use a different port number according to the email server settings Recipient Enter the address of the email recipient Sender Enter the address of the email sender If the sender address is incorrect the email from the sender may be classified as SPAM by the email server and thus may not be sent Subject Enter a subject for your email Body Provide the text for the massage Attach the alarm or event images to the email that you are preparing 4 When done click Apply Storage You can activate recording on your device set the recording conditions check the saved data capacity and format the device itself 1 From the Setup menu select the lt Event F gt tab 2 Click lt Storage gt 3 Select a device to save data in l4 E If your device is properly recording data it will display Recording If you see an Error message check the following Check the storage to see if it is Bae Baas oS connected to the device a sbsssdnoeseresavovozs Check the files in the storage to see if they are damaged Check the storage to see if the
93. he network bandwidth controlling eis z Bie sy the bit rate Adjusting the bit rate depends on the ATC mode Control framerate Reduce the frame rate if the network bandwidth drops down Control compression Control the compression rate if the network bandwidth drops down Compression adjustment can cause deterioration of the image quality f lt Bitrate control gt is set to lt CBR gt the encoding priority according to the ATC mode will be fixed as below Bitrate control ATC mode Control framerate Control compression 58_ setup screen e ATC sensitivity Affect the transfer rate according to the variance in the network bandwidth The transfer rate will be adjusted to the fastest if the bandwidth is lt Very high gt and adjusted to the latest if the bandwidth is lt Very low gt e ATC limit If the quality or frame rate is adjusted the property will be changed to the applied value against the previous setting value 100 Note that if you reduce the property value too much you may encounter flickering on the screen So it is advisable to adjust the value within the threshold tis recommended to apply ATC control only for cameras supporting ATC Set the ATC sensitivity to lt Very low gt in a network environment with high variance in the network bandwidth m f the network connection is unstable you may encounter flickering on the screen 7 When done click Apply EZH 4 View modes of Dis
94. his License for any work from that copyright holder and you cure the violation prior to 30 days after your receipt of the notice Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License If your rights have been terminated and not permanently reinstated you do not qualify to receive new licenses for the same material under section 10 9 Acceptance Not Required for Having Copies You are not required to accept this License in order to receive or run a copy of the Program Ancillary propagation of a covered work occurring solely as a consequence of using peer to peer transmission to receive a copy likewise does not require acceptance However nothing other than this License grants you permission to propagate or modify any covered work These actions infringe copyright if you do not accept this License Therefore by modifying or propagating a covered work you indicate your acceptance of this License to do so 10 Automatic Licensing of Downstream Recipients Each time you convey a covered work the recipient automatically receives a license from the original licensors to run modify and propagate that work subject to this License You are not responsible for enforcing compliance by third parties with this License An entity transaction is a transaction transferring control of an organization or substantially all assets of one or su
95. http Awww samsungipolis com Product ID the Login dialog should appear m m Network connection is disabled in the LAN only environment English _41 aaMJI GAM web viewer Connecting via UPnP 1 Run the client or operating system in support of the UPnP protocol 2 Click the camera name for search In the Windows operating system click the camera name searched from the network menu The login window is displayed Connecting via Bonjour 1 Run the client or operating system in support of the Bonjour protocol 2 Click the camera name for search In the Mac operating system click the camera name searched from the Bonjour tab of Safari The login window is displayed To check the DDNS address If the camera is connected directly to the DHCP cable modem DSL modem or PPPoE modem the IP address of your network will be changed each time you try to connect to the ISP Internet Service Provider server If this is the case you will not be informed of the IP address changed by DDNS Once you register a dynamic IP based device with the DDNS server you can easily check the changed IP when you try to access the device To register your device to the lt DDNS gt server visit www samsungipolis com and register your device first and then set the Web Viewer s lt Network gt lt DDNS gt to lt Samsung DDNS gt as well as providing lt Product ID gt that had been used for DDNS registration 42_ web viewer
96. ick Apply D Select lt Video amp Audio gt lt Audio setup gt and set the proper volume for your MIC as an audio input source so that the audio detection function can work properly m f detected audio level is too low set the audio input gain to a higher level in lt Audio setup gt You can use the audio detection function when the camera is connected with an audio input device English _105 Setup screen Network disconnection When the network is physically disconnected it is considered as an event to be saved 1 From the Setup menu select the lt Event F gt tab 2 Click lt Network disconnection gt 3 Set whether or not to lt Enable gt 4 Specify the activation time and activation condition For more information about lt Activation time gt and lt Action gt refer to Alarm input page 97 5 When done click Apply EZH App event You can set the system to generate signals for the events defined on the application The event signals provided vary depending on the application function 1 From the Setup menu select the lt Event F gt tab 2 Click lt App event gt 3 Set whether or not to lt Enable gt 4 Specify the activation time and activation condition For more information about lt Activation time gt and lt Action gt refer to Alarm input page 97 5 When done click Apply EE 106_ setup screen SYSTEM SETUP Pro
97. ies of the Program s source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice keep intact all notices stating that this License and any non permissive terms added in accord with section 7 apply to the code keep intact all notices of the absence of any warranty and give all recipients a copy of this License along with the Program You may charge any price or no price for each copy that you convey and you may offer support or warranty protection for a fee 5 Conveying Modified Source Versions You may convey a work based on the Program or the modifications to produce it from the Program in the form of source code under the terms of section 4 provided that you also meet all of these conditions a The work must carry prominent notices stating that you modified it and giving a relevant date b The work must carry prominent notices stating that itis released under this License and any conditions added under section 7 This requirement modifies the requirement in section 4 to keep intact all notices c You must license the entire work as a whole under this License to anyone who comes into possession of a copy This License will therefore apply along with any applicable section 7 additional terms to the whole of the work and all its parts regardless of how they are packaged This License gives no permission to license the work i
98. il liability in connection with the Program unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee END OF TERMS AND CONDITIONS GNU LESSER GENERAL PUBLIC LICENSE Version 2 1 February 1999 Copyright C 1991 1999 Free Software Foundation Inc 51Franklin Street Fifth Floor Boston MA 02110 1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed This is the first released version of the Lesser GPL It also counts as the successor of the GNU Library Public License version 2 hence the version number 2 1 Preamble The licenses for most software are designed to take away your freedom to share and change it By contrast the GNU General Public Licenses are intended to guarantee your freedom to share and change free software to make sure the software is free for all its users This license the Lesser General Public License applies to some specially designated software packages typically libraries of the Free Software Foundation and other authors who decide to use it You can use it too but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case based on the explanations below When we speak of free software we are referring to freedom of use not price Our General Public Licenses are designed to make sure that y
99. ing the Camera to a Broadband Router with the PPPoE Cable Modem Buttons used in IP Installer Static IP Setup Dynamic IP Setup Port Range Forward Port Mapping Setup Connecting to the Camera from a Shared Local PC Connecting to the Camera from a Remote PC via the Internet English _7 Overview 8_ overview WEB VIEWER SETUP SCREEN APPENDIX 41 43 43 44 46 50 57 57 70 79 88 93 107 112 113 120 122 124 Connecting to the Camera Password setting Login Installing STW WebViewer Plugin Using the Live Screen Playing the recorded video Setup Basic Setup Video amp Audio setup Network Setup Event Setup NAS Network Attached Storage guide System Setup Viewing profile information Specification Product Overview Troubleshooting Open source license notification on the product PRODUCT FEATURES Fisheye lens This lens has 360 vision and it can record video panoramically If you use Smart Viewer on your PC you can view corrected video in real time Dustproof Waterproof IP66 SNF 8010VM The dustproof and waterproof design makes you feel at ease when installing the product outdoors or exposing it to rain HD Video Quality Multi Streaming This network camera can display videos in different resolutions and qualities simultaneously using different CODECs Web Browser based Monitoring Using the Internet web browser to display the image in a local network environment A
100. iption of how to save data using the NAS according to the Synology NAS method which is one of the recommended products 1 Access the Synology NAS as an admin In this example the NAS IP Address is set to 192 168 20 253 2 If you access it as an admin the following screen will be displayed Click the Control Panel DiskStation _ Remember me English _93 N3aYOS dNLAS Setup screen 3 Click the lt Shared Folder gt in the file a File Sharing and Privileges sharing and privilege menu Win Mac NFS FTP Network Services Web Services DDNS 4 Click the Create button aane lioda nade 5 After entering the shared folder sae Description nam e l D click the O K button to Hide this shared Sea in My Network Places create a shared folder ee administrators only In this example the shared folder name Hide folders and files from users without permissions z a Encrypt this shared folder IS testDirectory me key Confirm key C Mount automatically on startup 6 In Windows for NAS access set Edit Shared Folder testDirectory the privilege for the shared folder as es Pee Local users follows a Check the admin s Read Write e admin m a 5 7 Click on the lt User gt in the file sharing and privilege menu 94_ setup sc
101. is free software you can redistribute it and or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation either version 2 1 of the License or at your option any later version This library is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE See the GNU Lesser General Public License for more details You should have received a copy of the GNU Lesser General Public License along with this library if not write to the Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Also add information on how to contact you by electronic and paper mail You should also get your employer if you work as a programmer or your school if any to sign a copyright disclaimer for the library if necessary Here is a sample alter the names Yoyodyne Inc hereby disclaims all copyright interest in the library Frob a library for tweaking knobs written by James Random Hacker signature of Ty Coon 1 April 1990 Ty Coon President of Vice Copyright c 1998 2000 University College London All rights reserved Redistribution and use in source and binary forms with or without modification is permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of con
102. ize with NTP server Sync with the time of the specified server address Synchronize with PC viewer Sets to the time of the computer connected 4 When done click Apply EZH I m m f you select the lt Synchronize with PC viewer gt the standard timezone should be set the same as the current timezone in PC 64_ setup screen IP amp Port 1 From the Setup menu select the lt Basic gt tab 2 Click lt IP amp Port gt 3 Set the lt IPv4 setup gt e P type Select an IP connection type Manual Specify the IP address Subnet mask Gateway DNS1 and DNS2 DHCP Specify the DNS1 and DNS2 PPPoE Specify the DNS1 DNS2 ID and Password f you set it to lt Manual gt you should specify the IP Subnet mask Gateway DNS 1 amp 2 manually e MAC address Shows the MAC address e P address Displays the current IP address e Subnet mask Displays the lt Subnet mask gt for the set IP e Gateway Displays the lt Gateway gt for the set IP e DNS1 DNS2 Displays the DNS Domain Name Service server address 4 Set the lt IPv6 setup gt Set to lt Use gt to use IPv6 address e Default Use the default IPv6 address e DHCP Display and use the IPv6 address obtained from the DHCP server e Manual Enter IP address and gateway manually and use it NJJY0S dNLAS m The IP addressing system will be defaulted to DHCP If no DHCP server is found the previous settings
103. l version so that the original author s reputation will not be affected by problems that might be introduced by others Finally software patents pose a constant threat to the existence of any free program We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder Therefore we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license Most GNU software including some libraries is covered by the ordinary GNU General Public License This license the GNU Lesser General Public License applies to certain designated libraries and is quite different from the ordinary General Public License We use this license for certain libraries in order to permit linking those libraries into non free programs When a program is linked with a library whether statically or using a shared library the combination of the two is legally speaking a combined work a derivative of the original library The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom The Lesser General Public License permits more lax criteria for linking other code with the library We call this license the Lesser General Public License because it does Less to protect the user s freedom than the ordinary General Public License It als
104. larm When an event occurs the captured video of the event is sent to the e mail and FTP server registered by the user or is saved in the Micro SD memory card or NAS Tampering Detection If the monitoring is interrupted in any way the camera will trigger the event alarm Video Motion Detection Detects a motion from the video before triggering an event Audio Detection Detects sound louder than a certain level specified by user Auto Detection of Disconnected Network Detects network disconnection before triggering an event ONVIF Compliance This product supports ONVIF Profile S QO B Vi F For more information refer to www onvif org Driving network video through global standardization MAIAYSAO m This piece of equipment is a high resolution video transmission tool that supports a resolution of 2 mega pixels or higher When you transmit high resolution video with a resolution higher than what is supported by the RFC2435 RTP payload format for JPEG the existing low resolution spec it uses the Onvif JPEG extension header method for transmission of high resolution video Thus when you transmit high resolution video to external equipment or S W using Onvif you need to check whether your client equipment or S W supports the most up to date spec Onvif JPEG extension header method English _9 Overview RECOMMENDED PC SPECIFICATIONS e CPU Chips sporting Intel Core i5 or higher Web Plug in is optimized to SSE 4 1
105. layback You can specify an area on the screen to include or exclude the area to from detection You can specify up to 4 areas e Detection area Sets the entire screen as excluded from detection and adds specified area as motion detection area Set an area to be detected by dragging your mouse on the screen e Non detection area Sets the entire screen as motion detection area and excludes specified area as not to be detected Set an area not to be detected by dragging your mouse on the screen 4 To delete an area right click on the screen to open popup context menu and select Delete and OK button 5 When dore click Apply 104_ setup screen Audio detection You can set to detect sound over the specified level and trigger an event accordingly 1 From the Setup menu select the lt Event F gt tab 2 Click lt Audio detection gt 3 Set whether or not to lt Enable gt 4 Set the audio detection s sound level The lower the level the smaller the sound change is detected D The audio detection level is designed to normalize the input data to a value between 1 and 100 and detect the signal larger than threshold level It is unrelated to the decibel dB level N3JJY0S dNLAS 5 Specify the activation time and activation condition For more information about lt Activation times and lt Action gt refer to Alarm input page 97 6 When done cl
106. lt Video profile gt When a motion appears in the Source View screen the alarm goes off even if no motion occurs in the Dewarp view Before using set the minimum and maximum motion sizes to suit desired motion range to be detected Detected size of an object may have difference with the actual size according to its shape Up to 16 objects from the top side of the screen can be displayed m Inthe following cases effective functioning of motion detection may be degraded or cause improper detection The object color or brightness is similar to the background Small activities around the border area of the camera s field of view Multiple movements continue occurring at random due to a scene change rapid lighting changes or other reasons A fixed object continues moving in the same position Motions of less position changing such as approaching to the camera or fading away from the camera Moving object approaches to the camera too close An object hides other objects behind Two or more objects overlap or one object divides in multiple portions Too fast object for a proper detection one object should be found overlapping between contiguous frames Reflection blur shadow due to a strong light such as direct sunlight illumination or headlamp In severe snow rain wind or in dawn dusk 102_ setup screen To use Motion detection It detects a motion that meets all conditions specified by sensitivity size and ar
107. lude claims that would be infringed only as a consequence of further modification of the contributor version For purposes of this definition control includes the right to grant patent sublicenses in amanner consistent with the requirements of this License Each contributor grants you a non exclusive worldwide royalty free patent license under the contributor s essential patent claims to make use sell offer for sale import and otherwise run modify and propagate the contents of its contributor version In the following three paragraphs a patent license is any express agreement or commitment however denominated not to enforce a patent such as an express permission to practice a patent or covenant not to sue for patent infringement To grant such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party If you convey a covered work knowingly relying on a patent license and the Corresponding Source of the work is not available for anyone to copy free of charge and under the terms of this License through a publicly available network server or other readily accessible means then you must either 1 cause the Corresponding Source to be so available or 2 arrange to deprive yourself of the benefit of the patent license for this particular work or 3 arrange in a manner consistent with the requirements of this License to extend the patent license to dow
108. lude the work s System Libraries or generalpurpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work For example Corresponding Source includes interface definition files associated with source files for the work and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require such as by intimate data communication or control flow between those subprograms and other parts of the work The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source The Corresponding Source for a work in source code form is that same work 2 Basic Permissions All rights granted under this License are granted for the term of copyright on the Program and are irrevocable provided the stated conditions are met This License explicitly affirms your unlimited permission to run the unmodified Program The output from running a covered work is covered by this License only if the output given its content constitutes a covered work This License acknowledges your rights of fair use or other equivalent as provided by copyright law You may make run and propagate covered works that you do not convey without conditions so long as your license otherwise remains in force You may convey covered works to others for the sole purpose of having them
109. make modifications exclusively for you or provide you with facilities for running those works provided that you comply with the terms of this License in conveying all material for which you do not control copyright Those thus making or running the covered works for you must do so exclusively on your behalf under your direction and control on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you Conveying under any other circumstances is permitted solely under the conditions stated below Sublicensing is not allowed section 10 makes it unnecessary 3 Protecting Users Legal Rights From anti Circumvention Law No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996 or similar laws prohibiting or restricting circumvention of such measures When you convey a covered work you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work and you disclaim any intention to limit operation or modification of the work as ameans of enforcing against the work s users your or third parties legal rights to forbid circumvention of technological measures 4 Conveying Verbatim Copies You may convey verbatim cop
110. more clearly 1 Select lt Back light gt Back light 2 Set lt Mode gt to lt BLC gt Mode 3 Set lt BLC level gt Top You can change the level to adjust the Sa Left brightness of the monitoring area Right 4 Set the lt Top Bottom Left Right gt levels to specify the target area n When BLC is set the green box is displayed on the screen for 15 seconds Jo prevent malfunction at the time of BLC setup the vertical space of the BLC area should be over 40 and below 60 while the horizontal space over 30 and below 60 English _75 N3JY0S dNLIJS Setup screen To Set Exposure You can adjust the exposure level of the camera 1 Select lt Exposure gt 2 Select each item and set it properly Brightness i Minimum shutter e Brightness Adjust the screen Soa see brightness Anti flicker ta oy SSNR e Minimum shutter The limit of the SSNR level longest exposure time ist Shutter is the mode to set up the range of the sensor exposure time which will specify the upper and lower limits for the electronic shutter movement Maximum shutter The limit of the shortest exposure time Anti flicker It prevents screen flickering incurring from the dissonance between the surrounding lighting and the frequency SSNR Select Able or Disable for the video noise elimination function When AGC mode is set to lt Off gt you cannot use SSNR SSNR level Adjust the noise reduction level
111. n 2 in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following a Accompany it with the complete corresponding machine readable source code which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or b Accompany it with a written offer valid for at least three years to give any third party for a charge no more than your cost of physically performing source distribution a complete machinereadable copy of the corresponding source code to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or c Accompany it with the information you received as to the offer to distribute corresponding source code This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer in accord with Subsection b above The source code for a work means the preferred form of the work for making modifications to it For an executable work complete source code means all the source code for all modules it contains plus any associated interface definition files plus the scripts used to control compilation and installation of the executable However as a special exception the source code distributed need not include anything that is normally distributed in either source or bin
112. n any other way but it does not invalidate such permission if you have separately received it d If the work has interactive user interfaces each must display Appropriate Legal Notices however if the Program has interactive interfaces that do not display Appropriate Legal Notices your work need not make them do so A compilation of a covered work with other separate and independent works which are not by their nature extensions of the covered work and which are not combined with it such as to form a larger program in or on a volume of a storage or distribution medium is called an aggregate if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation s users beyond what the individual works permit Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate 6 Conveying Non Source Forms You may convey a covered work in object code form under the terms of sections 4 and 5 provided that you also convey the machine readable Corresponding Source under the terms of this License in one of these ways a Convey the object code in or embodied in a physical product including a physical distribution medium accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange b Convey the object code in or embodied in a physical product including a physical distri
113. n function may not work properly in the following cases Under circumstances of simple background or low illumination and night time may lower the detection sensitivity A severe shaking of the camera or a drastic change to the illumination can be considered a tampering by mistake Detection of the tampering may take some time maximum 5 seconds right after the tampering was made Once a tampering is detected the camera will resume a normal operating after a certain stability time approx 5 seconds during which no detection will be performed 100_ setup screen Motion detection Events of motion detection can be set to trigger event signal output 1 From the Setup menu select the eae E monitoring 3 Playback F setup lt Event F gt tab Click lt Motion detection gt Set whether or not to lt Enable gt Set lt Sensitivity gt lt Size gt and lt Area gt a fF W N Set whether to use lt Detection result overlay gt When a motion is detected its size and position is marked with a rectangle on the screen e Green All targets detected as Moving N3JY0S dNLAS 6 Specify the activation time and activation condition For more information about lt Activation time gt and lt Action gt refer to Alarm input page 97 7 When done click Apply English _101 Setup screen w Motion detection works based on state of the Source View screen of
114. nd that users may redistribute the program under these conditions and telling the user how to view a copy of this License Exception if the Program itself is interactive but does not normally print such an announcement your work based on the Program is not required to print an announcement These requirements apply to the modified work as a whole If identifiable sections of that work are not derived from the Program and can be reasonably considered independent and separate works in themselves then this License and its terms do not apply to those sections when you distribute them as separate works But when you distribute the same sections as part of a whole which is a work based on the Program the distribution of the whole must be on the terms of this License whose permissions for other licensees extend to the entire whole and thus to each and every part regardless of who wrote it Thus it is not the intent of this section to claim rights or contest your rights to work written entirely by you rather the intent is to exercise the right to control the distribution of derivative or collective works based on the Program In addition mere aggregation of another work not based on the Program with the Program or with a work based on the Program on a volume of a storage or distribution medium does not bring the other work under the scope of this License 3 You may copy and distribute the Program or a work based on it under Sectio
115. netwot silts i IP CAMERA v NVR No Device Name Alias Mode MAC Address IP Address URL 1 SNF 8010 N A Static 00 09 18 E0 0F DF 192 168 1 100 IPvd http 192 168 1 100 index htm 6 7 J Scan 1 Item IV IPv4 V IPv6 E Item Description Model name of the connected camera Device Name Click the column to sort the list by model name However search will be stopped if clicked during the search 2 Alias This function is not currently implemented 3 Mode Displays either lt Static gt lt Dynamic gt or lt PPPoE gt for the current network connection status Ethernet address for the connected camera a Click the column to sort the list by Ethernet address However search will be stopped if clicked during the search IP address IP Address Click the column to sort the list by IP address However search will be stopped if clicked during the search Network setting for the camera Protocol The factory default is IPv4 Cameras with the IPv6 setting will be displayed IPv6 o e 32_ network connection and setup Item Description DDNS URL address enabling access from the external Internet 7 URL However this will be replaced with the lt IP Address gt of the camera if DDNS registration has failed e 8 IPv4 Scans for cameras with the IPv4 setting 9 PVG scans for cameras with the IPv6 setting 5 Activated
116. nnection and setup Auto Network Setup Run lt IP Installer_v2 XX exe gt to display the camera search list At the initial startup both Auto Set and Manual Set will be grayed out D For cameras found with the IPv6 setting these buttons will be grayed out as the cameras do not support this function 1 Select a camera in the search list Check the MAC address of the camera on the camera s label Both the Auto Set and Manual Set buttons will be activated 2 Click Auto Set The Auto Setting dialog appears The lt IP Address gt lt Subnet Mask gt and lt Gateway gt will be set automatically 3 Enter the password Auto Setting Enter the password of admin account Network Information which was used to access the camera IP Address 192 168 Subnet Mask K For the security purposes you are oe oer Gat 192 168 recommended to use a combination a of numbers alphabets uppercase and I IP Ssting See lowercase and special characters for your Password password e f you want to change the password refer Cancel to Administrator password change of the user setup page 62 4 Click OK Auto network setup will be completed 36_ network connection and setup DYNAMIC IP SETUP Dynamic IP Environment Setup e Example of the Dynamic IP environment Ifa Broadband Router with cameras connected is assigned an IP
117. nstream recipients Knowingly relying means you have actual knowledge that but for the patent license your conveying the covered work in a country or your recipient s use of the covered work in a country would infringe one or more identifiable patents in that country that you have reason to believe are valid If pursuant to or in connection with a single transaction or arrangement you convey or propagate by procuring conveyance of a covered work and grant a patent license to some of the parties receiving the covered work authorizing them to use propagate modify or convey a specific copy of the covered work then the patent license you grant is automatically extended to all recipients of the covered work and works based on it A patent license is discriminatory if it does not include within the scope of its coverage prohibits the exercise of or is conditioned on the non exercise of one or more of the rights that are specifically granted under this License You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software under which you make payment to the third party based on the extent of your activity of conveying the work and under which the third party grants to any of the parties who would receive the covered work from you a discriminatory patent license a in connection with copies of the covered work conveyedby you or copies made from th
118. o alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the product 4 overview Class I construction An apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection Battery Batteries battery pack or batteries installed shall not be exposed to excessive heat such as sunshine fire or the like MAIAYSAO Disconnection Device Disconnect the main plug from the apparatus if it s defected And please call a repair man in your location When used outside of the U S it may be used HAR code with fittings of an approved agency is employed CAUTION Risk of explosion if battery is replaced by an incorrect type Dispose of used batteries according to the instructions These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so Please use the input power with just one camera and other devices must not be connected The ITE is to be connected only to PoE networks without routing to the outside plant English _5 Overview Please read the following recommended safety precautions carefully Do not place this apparatus on an uneven surface e Do not install on a surface where it is exposed to direct sunlight near
119. o provides other free software developers Less of an advantage over competing non free programs These disadvantages are the reason we use the ordinary General Public License for many libraries However the Lesser license provides advantages in certain special circumstances For example on rare occasions there may be a special need to encourage the widest possible use of a certain library so that it becomes a de facto standard To achieve this nonfree programs must be allowed to use the library A more frequent case is that a free library does the same job as widely used non free libraries In this case there is little to gain by limiting the free library to free software only so we use the Lesser General Public License In other cases permission to use a particular library in nonfree programs enables a greater number of people to use a large body of free software For example permission to use the GNU C Library in non free programs enables many more people to use the whole GNU operating system as well as its variant the GNU Linux operating system Although the Lesser General Public License is Less protective of the users freedom it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library The precise terms and conditions for copying distribution and modification follow Pay close attention to the difference between
120. oadband Router IP Address Enter an address falling in the IP range provided by the Broadband Router ex 192 168 1 2 254 a Arona Configuration DACP 192 168 0 2 254 oqucaanalsetings peternane Router 192 168 XXX 2 254 Subnet Mask The lt Subnet Mask gt of the Broadband Router will be the lt Subnet Mask gt of the camera Gateway The lt Local IP Address gt of the Broadband Router will be the lt Gateway gt of the camera D The settings may differ depending on the connected Broadband Router model For more information refer to the user manual of the applicable router For more information about port forwarding of the broadband router refer to Port Range Forward Port Mapping Setup Page 38 If the Broadband Router has more than one camera connected Wireless G Broad dN13S ANY NOILOANNOO MYOMLAN Configure the IP related settings and the Port related settings distinctly with each other ex Category Camera 1 Camera 2 IP Address 192 168 1 100 192 168 1 101 IP related settings Subnet Mask 255 255 255 0 255 255 255 0 Gateway 192 168 1 1 192 168 1 1 HTTP Port 8080 8081 Port related settings VNP Port 4520 4521 4 of the Internet browser before you can access the camera ex http IP address HTTP Port htto 1 92 168 1 100 8080 m f the lt HTTP Port gt is set other than 80 you must provide the lt Port gt number in the address bar English _35 network co
121. ogram proprietary To prevent this we have made it clear that any patent must be licensed for everyone s free use or not licensed at all The precise terms and conditions for copying distribution and modification follow TERMS AND CONDITIONS FOR COPYING DISTRIBUTION AND MODIFICATION Version 2 June 1991 Copyright C 1989 1991 Free Software Foundation Inc 51 Franklin S 0 This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License The Program below refers to any such program or work and a work based on the Program means either the Program or any derivative work under copyright law that is to say a work containing the Program or a portion of it either verbatim or with modifications and or translated into another language Hereinafter translation is included without limitation in the term modification Each licensee is addressed as you Activities other than copying distribution and modification are not covered by this License they are outside its scope The act of running the Program is not restricted and the output from the Program is covered only if its contents constitute a work based on the Program independent of having been made by running the Program Whether that is true depends on what the Program does 1 You may copy and distribute verbatim copies of the Prog
122. old waste at the end of their working life Where marked the chemical symbols Hg Cd or Pb indicate that the battery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed of these substances can cause harm to human health or the environment To protect natural resources and to promote material reuse please separate batteries from other types of waste and recycle them through your local free battery return system SALES NETWORK SAMSUNG TECHWIN CO LTD 6 Pangyo ro 319beon gil Bundang gu Seongnam si Gyeonggi do SEOUL 463 400 Rep of KOREA Tel 82 70 7147 8753 8764 Fax 82 31 8018 3740 www samsungsecurity com SAMSUNG TECHWIN AMERICA Inc SAMSUNG TECHWIN EUROPE LTD 100 Challenger Rd Suite 700 Ridgefield Park NJ 07660 2nd Floor No 5 The Heights Brooklands Weybridge Toll Free 1 877 213 1222 Direct 1 201 325 6920 Surrey KT13 ONY UK Fax 1 201 373 0124 Tel 44 1932 82 6700 Fax 44 1932 82 6701 www samsung security com www samsungsecurity co uk www samsungtechwin com www samsungsecurity com www samsungipolis com
123. ommunication across the network Corresponding Source conveyed and Installation Information provided in accord with this section must be in a format that is publicly documented and with an implementation available to the public in source code form and must require no special password or key for unpacking reading or copying 7 Additional Terms Additional permissions are terms that supplement the terms of this License by making exceptions from one or more of its conditions Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License to the extent that they are valid under applicable law If additional permissions apply only to part of the Program that part may be used separately under those permissions but the entire Program remains governed by this License without regard to the additional permissions When you convey a copy of a covered work you may at your option remove any additional permissions from that copy or from any part of it Additional permissions may be written to require their own removal in certain cases when you modify the work You may place additional permissions on material added by you to a covered work for which you have or can give appropriate copyright permission Notwithstanding any other provision of this License for material you add to a covered work you may if authorized by the copyright holders of that material supplement the t
124. on w Sound quality deterioration or howling may occur if the loudness of the sound source or gain value were set excessively 4 Set the audio output level e Enable Sets whether to use audio output e Gain Specify the audio output amplification 5 When done click Apply HEE 72_ setup screen Camera setup You can change the camera settings according to the environment where the camera is located 1 From the Setup menu select the lt Video amp Audio EJ gt tab 2 Click lt Camera setup gt 3 Configure the settings as necessary of SSDR White balance Back light Exposure Special Day Night OSD 4 When done click Apply f a certain time timeout 240s is elapsed with your not pressing the Apply HEE button after changing the settings your changes will not be applied N3JJY0S dNLAS To Set SSDR Samsung Super Dynamic Range In a scene where the difference between bright and dark is severe you can increase the brightness of the dark area alone to regulate the overall brightness 1 Select lt SSDR gt 2 Set lt Mode gt to lt On gt 3 Configure the lt Level gt and lt D Range gt settings as necessary e Level Adjust the level of the dynamic range e D Range Select the amplitude area of the dynamic range English _73 Setup screen To Set White Balance You can correct the image colors based on white under any lighting conditions 1 Sel
125. ormation when placing other items on the screen 78_ setup screen NETWORK SETUP DDNS DDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address of a camera into a general Host Name so that the user can easily remember it A You can use the DDNS service only if the internet is connected 1 From the Setup menu select the lt Network EE gt tab 2 Click lt DDNS gt 3 Select the lt DDNS gt connection type NA3aYOS dNLAS 4 Type in the DDNS items according to the selected type e Samsung DDNS Select this if you use the DDNS server provided by Samsung Techwin Product ID Enter the product ID that is registered with the Samsung DDNS service Quick connect It sets port forwarding automatically when used with a UPnP Universal Plug and Play supporting router 4 m f you want to use the DDNS service without using a hub that supports the UPnP function click Quick connect then go to the hub menu and activate port forwarding for your hub For more on how to set port forwarding for your hub refer to Port Range Forward Port Mapping Setup page 38 e Public DDNS Select one of provided public DDNS servers when you use a public DDNS server Service Select desired public DDNS service server Host name Enter the name of the host that is registered with the DDNS server User name Enter the user name for the DDNS service Password Enter the password for th
126. orwarding on the Broadband Router device through its configuration web page e You cannot change the Silverlight policy server port of a camera e You can change the ports of the camera except the policy server port through its configuration web pages When Camera1 and Camera2 are connected to a router dN13S ANY NOILOANNOO MYOMLAN Camera1 192 168 1 100 HTTP port Device port RTSP port Policy server port S Camera2 192 168 1 101 HTTP port RTSP port Policy server port 4 Port forwarding can be done without additional router setup if the router supports the UPnP Universal Plug and Play function After connecting the network camera set lt Quick connect gt of lt Samsung DDNS gt to lt 0n gt in the Setup gt Network gt DDNS menu English _39 network connection and setup CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC 1 Run the IP Installer It will scan for connected cameras and display them as a list 2 Double click a camera to access The Internet browser starts and connects to the camera 4 Access to the camera can also be gained by typing the camera s IP address in the address bar of the Internet browser CONNECTING TO THE CAMERA FROM A REMOTE PC VIA THE INTERNET Since using the IP Installer on a remote computer that is not in the Broadband Router s network cluster is not allowed users can access camer
127. ose copies or b primarily for and in connection with specific products or compilations that contain the covered work unless you entered into that arrangement or that patent license was granted prior to 28 March 2007 Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law 12 No Surrender of Others Freedom If conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of thisLicense If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not convey it at all For example if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program 13 Use with the GNU Affero General Public License Notwithstanding any other provision of this License you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work and to convey the resulting work The terms of this License will continue to apply to the part whic
128. ou have the freedom to distribute copies of free software and charge for this service if you wish that you receive source code or can get it if you want it that you can change the software and use pieces of it in new free programs and that you are informed that you can do these things To protect your rights we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it For example if you distribute copies of the library whether gratis or for a fee you must give the recipients all the rights that we gave you You must make sure that they too receive or can get the source code If you link other code with the library you must provide complete object files to the recipients so that they can relink them with the library after making changes to the library and recompiling it And you must show them these terms so they know their rights We protect your rights with a two step method 1 we copyright the library and 2 we offer you this license which gives you legal permission to copy distribute and or modify the library To protect each distributor we want to make it very clear that there is no warranty for the free library Also if the library is modified by someone else and passed on the recipients should know that what they have is not the origina
129. out restriction including without limitation the rights to use copy modify merge publish distribute sublicense and or sell copies of the Software and to permit persons to whom the Software is furnished to do so subject to the following conditions The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software THE SOFTWARE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT IN NO EVENT SHALL THE DANIEL VEILLARD BE LIABLE FOR ANY CLAIM DAMAGES OR OTHER LIABILITY WHETHER IN AN ACTION OF CONTRACT TORT OR OTHERWISE ARISING FROM OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE Except as contained in this notice the name of Daniel Veillard shall not be used in advertising or otherwise to promote the sale use or other dealings in this Software without prior written authorization from him OpenSSL LICENSE Copyright c 1998 2006 The OpenSSL Project All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce
130. p You can easily set the event detection items and move to the detailed setting 1 From the Setup menu select the lt Basic gt tab 2 Click lt Event setup gt 3 Activate desired items on the Event list 4 When done click Apply EZH I D To make detailed event settings click on your desired settings Go to detailed lt Event gt setting 66_ setup screen DPTZ setup Use this settings page to move the camera view and perform the digital Zoom 1 Select the lt Basic gt tab from Setup menu 2 Click lt DPTZ setup gt 3 Click Y Show e Quadrant In the Distortion Compensation view select locations where you want to place split screens N3JJY0S dNLIJS g m To use Preset and Grouping in lt DPTZ setup gt function select the lt Single Rectangle gt view at lt Dewarping mode gt DPTZ methods can vary depending on lt Dewarping mode gt and lt Dewarp View gt in lt Video profile gt To see how to use the function refer to Dewarping mode page 71 4 Click the cursor J on the screen moving pad to control movement of the screen e Move screen Scroll the cursor in the direction desired e Control screen movement rate The farther the cursor is from the center of the screen the faster the screen moves 5 Control zoom movement e Zoom In Move up the bar in the right of the UI or press the J button The farther the bar is from the cen
131. pecifies a version number of this License which applies to it and any later version you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation If the Program does not specify a version number of this License you may choose any version ever published by the Free Software Foundation 10 If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different write to the author to ask for permission For software which is copyrighted by the Free Software Foundation write to the Free Software Foundation we sometimes make exceptions for this Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally NO WARRANTY 11 BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE THERE IS NO WARRANTY FOR THE PROGRAM TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE PROGRAM ASIS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU SHOULD THE PROGRAMPROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REP
132. r a portion or derivative of it under Section 2 in object code or executable form under the terms of Sections 1 and 2 above provided t hat you accompany it with the complete corresponding machine readable source code which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange If distribution of object code is made by offering access to copy from a designated place then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code even though third parties are not compelled to copy the source along with the object code 5 A program that contains no derivative of any portion of the Library but is designed to work with the Library by being compiled or linked with it is called a work that uses the Library Such a work in isolation is not a derivative work of the Library and therefore falls outside the scope of this License However linking a work that uses the Library with the Library creates an executable that is a derivative of the Library because it contains portions of the Library rather than a work that uses the library The executable is therefore covered by this License Section 6 states terms for distribution of such executables When a work that uses the Library uses material from a header file that is part of the Library the object code for the work may be a derivati
133. ram s source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty keep intact all the notices that refer to this License and to the absence of any warranty and give any other recipients of the Program a copy of this License along with the Program You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for a fee 2 You may modify your copy or copies of the Program or any portion of it thus forming a work based on the Program and copy and distribute such modifications or work under the terms of Section 1 above provided that you also meet all of these conditions a You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change b You must cause any work that you distribute or publish that in whole or in part contains or is derived from the Program or any part thereof to be licensed as a whole at no charge to all third parties under the terms of this License c If the modified program normally reads commands interactively when run you must cause it when started running for such interactive use in the most ordinary way to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty or else saying that you provide a warranty a
134. rd 4321 to set IP Address Subnet Mask Gateway HTTP Port VNP Port IP type After changing the network interface for better security access the web viewer and change the password By factory default the IP address will be assigned from the DHCP server automatically lf there is no DHCP server available the IP address will be set to 192 168 1 100 To change the IP address use the IP Installer For further details on IP Installer use refer to Static IP Setup Page 33 28_ network connection and setup CONNECTING THE CAMERA DIRECTLY TO A DHCP BASED DSL CABLE MODEM DSL Cable Modem Camera External Remote PC DDNS Server Data Center KOREA 1 Connect the user PC directly with the network camera dN13S ANY NOILOANNOO MYOMLAN N Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet Use the Internet browser to connect to the web viewer Move to Setup page Move to Network DDNS and configure the DDNS settings Move to Basic IP amp Port and set the network type to DHCP Connect the camera which was removed from your PC directly to the modem O N DOO FR OW Restart the camera g For registering the DDNS settings refer to Registering with DDNS page 80 For configuring the DDNS settings refer to DD
135. rd cannot be replayed in the Web Viewer s Playback English _55 Wed Viewer 2 NAS Network Attached Storage 1 In Windows browser use lt ip address gt to access ex 192 168 20 31 defaultfolder chO1 img 2013_07_02 AVI 2 Go to lt Computer gt gt lt Network drive x connection gt gt Enter 1 4 Computer 4 amp 4 defaultfolder W W 192 168 20 31 4 jb chol D db D img 4 j 2013_07_02 3 Connected to the NAS b AVI The directory structure is same as the directory structure for a Micro SD memory card 4 a Name ate modifier e Size 001_20130702_160726 _ 001_20130702_160726 smi A filename starts with the format O01_ ORR Ant YYYYMMDD_HHMMSS avi and the file C C2 number is incremented by one YYYYMMDD_HHMMSS indicates the start time of data saving 001_YYYYMMDD_HHMMSS smi file is a caption file and you can view it if it exists in the same directory as its related AVI file The max recording time per AVI file is 30 minutes If you change or damage the saved data on your own it will not play back or save properly 56_ web viewer 405 786 KB Setup screen SETUP On the network you can set up basic information on the camera video and audio network events and system 1 In the Live screen click Setup RRA 2 The Setup screen appears m The setting page for preview video requires the STW web viewer plug in to be installed on the PC
136. rdless of what server hosts the Corresponding Source you remain obligated to ensure that it is available for as long as needed to satisfy these requirements e Convey the object code using peer to peer transmission provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d A separable portion of the object code whose source code is excluded from the Corresponding Source as a System Library need not be included in conveying the object code work A User Product is either 1 a consumer product which means any tangible personal property which is normally used for personal family or household purposes or 2 anything designed or sold for incorporation into a dwelling In determining whether a product is a consumer product doubtful cases shall be resolved in favor of coverage For a particular product received by a particular user normally used refers to a typical or common use of that class of product regardless of the status of the particular user or of the way in which the particular user actually uses or expects or is expected to use the product A product is a consumer product regardless of whether the product has substantial commercial industrial or non consumer uses unless such uses represent the only significant mode of use of the product Installation Information for a User Product means any m
137. reen 8 After clicking the Create button enter Name testID name ID and password Description In this example name ID is set to ee testID and password is also set to EER testl D T Send a notification mail to the newly created user C Display user password in notification mail n According to the NAS recommendations P psetow he Bam te ce when you use Netgear s NAS equipment do not allocate the capacity for use 9 In Windows set the privilege for NAS access For the shared folder created in step 4 called testDirectory check Read Write N3aYOS dNLIJS 10 Basic setting in the NAS is completed Connect your camera to the actual NAS IP address As shown below enter the NAS ID connection setting items con Default folder 11 After entering item 10 check lt On gt 12 Click the Apply button Finish saving by using the NAS English _95 Setup screen Alarm output 1 From the Setup menu select the lt Event F gt tab 2 Click lt Alarm output gt 3 Set the camera s type of alarm output f you change the alarm output type the alarm out button on the monitoring page and alarm output type displayed on Event Setup page will be changed accordingly e Type Normal open Considers Open circuit status of the sensor or alarm input device as normal and triggers alarm event if becomes
138. riginal gt 2960x2048 1920x1080 1600x1200 1280x1024 1280x960 1280x720 1024x768 800x600 720x480 640x480 320x240 Resolution Dewarped View 1 Single Rectangle 800x600 640x480 320x240 2 Quad View 1600x1200 1280x960 1024x768 800x600 640x480 320x240 3 Double Panorama 2048x1536 1600x1200 1280x960 1024x768 800x600 640x480 320x240 4 Single Panorama 2048x768 1600x600 1280x480 1024x384 800x300 640x240 320x120 Network Max Framerate MJPEG Source View 2560x2048 10fps 1920x1080 1600x1200 1280x1024 1280x960 1280x720 1024x768 15fps 800x600 720x480 640x480 320x240 20fps Single Panorama View 2048x768 1600x1200 1280x480 1024x384 15fps 800x300 640x240 320x120 20fps Double Panorama View 2048x1536 1600x1200 1280x960 1024x768 15fps 800x600 640x480 320x240 20fps Quad View 1600x1200 1280x960 1024x768 15fps 800x600 640x480 320x240 20fps Single Rectangle View 800x600 640x480 320x240 20fps 116_ appendix Description Items SNF 8010 SNF 8010VM Max Framerate Under Default Profile Setting Dual Video Stream framerate SourceH264 2560x2048 15fps DewarpH264 2048x1536 Ceiling Ground Dual Panorama 10fps SourceH264 2560x2048 19fps DewarpH264 1600x1200 Ceiling Ground Quad View 20fps SourceH264 2560x2048 19fps DewarpH264 800x600 Ceiling Ground Single Rectangle 18fps
139. ry prominent notices stating that you changed the files and the date of any change c You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License d If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility other than as an argument passed when the facility is invoked then you must make a good faith effort to ensure that in the event an application does not supply such function or table the facility still operates and performs whatever part of its purpose remains meaningful For example a function in a library to compute square roots has a purpose that is entirely well defined independent of the application Therefore Subsection 2d requires that any application supplied function or table used by this function must be optional if the application does not supply it the square root function must still compute square roots These requirements apply to the modified work as a whole If identifiable sections of that work are not derived from the Library and can be reasonably considered independent and separate works in themselves then this License and its terms do not apply to those sections when you distribute them as separate works But when you distribute the same sections as part of a whole which is a work based on the Library the distribution of the whole must be on the terms of this Licen
140. s may be individuals or organizations To modify a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission other than the making of an exact copy The resulting work is called a modified version of the earlier work or a work based on the earlier work A covered work means either the unmodified Program or a work based on the Program To propagate a work means to do anything with it that without permission would make you directly or secondarily liable for infringement under applicable copyright law except executing it on a computer or modifying a private copy Propagation includes copying distribution with or without modification making available to the public and in some countries other activities as well To convey a work means any kind of propagation that enables other parties to make or receive copies Mere interaction with a user through a computer network with no transfer of a copy is not conveying An interactive user interface displays Appropriate Legal Notices to the extent that it includes a convenient and prominently visible feature that 1 displays an appropriate copyright notice and 2 tells the user that there is no warranty for the work except to the extent that warranties are provided that licensees may convey the work under this License and how to view a copy of this License If the interface presents a list of user commands
141. s are designed to make sure that you have the freedom to distribute copies of free software and charge for them if you wish that you receive source code or can get it if you want it that you can change the software or use pieces of it in new free programs and that you know you can do these things To protect your rights we need to prevent others from denying you these rights or asking you to surrender the rights Therefore you have certain responsibilities if you distribute copies of the software or if you modify it responsibilities to respect the freedom of others For example if you distribute copies of such a program whether gratis or for a fee you must pass on to the recipients the same freedoms that you received You must make sure that they too receive or can get the source code And you must show them these terms so they know their rights Developers that use the GNU GPL protect your rights with two steps 1 assert copyright on the software and 2 offer you this License giving you legal permission to copy distribute and or modify it For the developers and authors protection the GPL clearly explains that there is no warranty for this free software For both users and authors sake the GPL requires that modified versions be marked as changed so that their problems will not be attributed erroneously to authors of previous versions Some devices are designed to deny users access to install or run modified
142. s up the current system settings before performing the restoration process The system is automatically restarts after backup or restoration e Restart Restarts the system To perform the upgrade 1 Click Upgrade 2 Click Browse and specify a file to upgrade 3 Click Send 4 The Upgrade dialog appears where the progression will be shown in the bottom Upgrade 11 Downloading has started 5 Once completed upgrading the browser exits and the camera restarts 108_ setup screen l4 E It may take a max of 10 minutes for the upgrade process If you forcibly terminate the upgrade process upgrade will not be completed properly During restarting the system accessing with web viewer will not be made You can download the latest version from the Samsung web site www samsungcctv com To back up the current settings 1 Click Backup The Save As dialog should appear 2 Specify the backup path with a proper file name and click Save The backup file will be saved to the specified path in the format of bin To restore the backup settings 1 To restore the backup settings click Restore 2 Select a backup file and click Open D m f you perform the backup or restoration the web browser will be closed and the camera will reboots You can restore a backup file for the SNF 8010 SNF 8010VM model only 2 Save As O gt Libraries Pictures
143. se whose permissions for other licensees extend to the entire whole and thus to each and every part regardless of who wrote it Thus it is not the intent of this section to claim rights or contest your rights to work written entirely by you rather the intent is to exercise the right to control the distribution of derivative or collective works based on the Library In addition mere aggregation of another work not based on the Library with the Library or with a work based on the Library on a volume of a storage or distribution medium does not bring the other work under the scope of this License 3 You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library To do this you must alter all the notices that refer to this License so that they refer to the ordinary GNU General Public License version 2 instead of to this License If a newer version than version 2 of the ordinary GNU General Public License has appeared then you can specify that version instead if you wish Do not make any other change in these notices Once this change is made in a given copy it is irreversible for that copy so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy This option is useful when you wish to copy part of the code of the Library into a program that is not a library 4 You may copy and distribute the Library o
144. ssary information ieee C DHCP STATIC ie Port feo MAC Address 00 09 18 30 A7 60 VNP Port as20 e MAC Ethernet Address The MAC eek ea address imprinted on the camera Subnet Mask 25 0 i Gatewa i32 ie it T label is automatically displayed and DE a requires no user setting aa Cancel 1g P related parameters can be set only when DHCP is not checked If not using a Broadband Router For setting lt IP Address gt lt Subnet Mask gt and lt Gateway gt contact your network administrator 4 In the lt Port gt pane provide necessary Wenualseting information e PRPoE C DHCP STATIC ice Pot f e HTTP Port Used to access the MAC Address 00 09 18 30 A7 60 VNP Port j0 IP Address 12 68 1 0 camera using the Internet browser Subnet Mask 25 25 25 0 defaulted to 80 aa Password e VNP Port Used to control the video C signal transfer defaulted to 4520 Cancel 5 Enter the password Enter the password of admin account which was used to access the camera m For the security purposes you are recommended to use a combination of numbers alphabets uppercase and lowercase and special characters for your password m f you want to change the password refer to Administrator password change of the user setup page 62 6 Click OK Manual network setup will be completed 34_ network connection and setup If using a Br
145. t contains the public key e Client certificate Select a public certificate that contains the client certificate key e Client private Key Select a public certificate that contains the client private key 5 When done click Apply EE To install remove 802 1x related certificates 1 Press the Browse EEEZ8 button for each item and select a certificate to install 2 If no certificate is installed you will see Not Available appearing next to the selected item 3 Press the Install EZZ button to start installation with a message of Installed next to the item 4 Press the Delete EZ button to remove the certificate 84_ setup screen QoS You can specify the priority to secure a stable transfer rate for a specific IP 1 From the Setup menu select the lt Network EE gt tab 2 Click lt QoS gt 3 Click the Add E button The IP list will be created 4 Enter an IP address to which you will apply Qos N3JY0S dNLAS 4 The default prefix for IPv4 is 32 For DSCP the default is set to 63 Only the IP addresses that are set to lt Use gt can be prioritized 5 Select an IP to delete from the list Click the Delete button 6 When done click Apply SNMP With the SNMP protocols the system or network admin can monitor the network devices on a remote site and configure the environment settings 1 From the Setup menu select the lt
146. t duration Specify the time point after the occurrence of the alarm to the specified time point the images will be transferred You can specify up to 120 seconds after the occurrence of the alarm Record file type It specifies the file format of the recorded images If you insert a Micro SD card saved in another saving file type AVI STW you will need to format it before use STW It is Samsung Techwin s unique file format AVI It is the conventional avi format Overwrite If the Micro SD memory is full this will delete old data and store new data in replacement Auto delete Data for a certain period is deleted while other data is not deleted This can be set within the range of one day to 180 days m f the storage period is expired data is automatically deleted and new data will be recorded Once deleted it cannot be recovered 90_ setup screen 4 Specify the lt Normal record setup gt e Always Always save recorded video in the Micro SD memory card f set to Always the activation time cannot be changed e Only scheduled time Records only on the specified time of the specified day of week e Clear EEJ Reset all settings 5 When done click Apply EZA If you want to record in your NAS N3aYOS dNLIS 1 Set the saving operation and basic recording m Auto deletion is supported only if your NAS meets the recommended specifications 2 Enter the information registered in yo
147. tally friendly RoHS compliant products and indicates that the product satisfies the EU RoHS Directive Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal Dz Correct disposal of batteries in this product Applicable in the European Union and other European countries with separate battery return systems This marking on the battery manual or packaging indicates that the batteries in this product should not be disposed of with other househ
148. ter the faster the screen expands e Zoom Out Move down the bar in the right of the UI or press the I button The farther the bar is from the center the faster the screen reduces in size i When performing the sequence action at a high or low temperature the system may respond slower than the set rate for accurate sequence action English _67 Setup screen To add the home position 1 Move to a desired start screen point and press Rj The point will be set to the home position 2 Click J in the home position You will move to the predetermined home position 3 When the camera is rebooted after setting the screen is located at the home position If the camera was on another sequence operation the sequence is performed 4 To activiate the Home position function select Single Rectangle in the lt Dewarping mode gt To add a preset 1 Select the preset number to add 2 Set the name for the preset 3 Press the ZZ button To delete a preset 1 Select the preset number to delete 2 Press the MENE button To move to a desired preset 1 Select a preset number that you want to move 2 Press the button 68_ setup screen To set a group The group function enables you to group various presets before calling them in sequence Six groups can save a total of 128 presets each 1 Select a group setting mode 2 Press the EENH button Entered in the bottom list 3 If
149. the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the following acknowledgment This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http www openssl org 4 The names OpenSSL Toolkit and OpenSSL Project must not be used to endorse or promote products derived from this software without prior written permission For written permission please contact openssl core openssl org 5 Products derived from this software may not be called OpenSSL nor may OpenSSL appear in their names without prior written permission of the OpenSSL Project 6 Redistributions of any form whatsoever must retain the following acknowledgment This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http www openssl org THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITU
150. ther problems caused by mismanaging a password Overview IMPORTANT SAFETY INSTRUCTIONS N O 0 SS hos 10 11 12 13 14 Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water MAIAYSAO Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Unplug this apparatus during lighting storms or when unused for A
151. ther the network is working fine IP Show the IP address of the current user Z m To check information on the profile currently used click Status again to refresh it It takes a certain time for any changes to be applied m f many viewers see lt Source View gt and lt Dewarp View gt at the same time frame rate may fall below normal rates 112_ setup screen aopenadix SPECIFICATION E Description SNF 8010 SNF 8010VM Imaging Device 1 1 8 6M PS CMOS IMX178 2 Total Pixels 6M D Effective Pixels 2560X2048 5 2M S Scanning System Progressive Video Color 0 5 Lux F2 5 SOIRE Color 0 2 Lux 2 5 30IRB B W 0 05 Lux F2 5 50IRE B W 0 02 Lux F2 5 30IRE Min Illumination S N Ratio Video Out Focal Length Zoom Ratio 1 14mm Fixed Max Aperture Ratio F2 5 Angular Field of View H 187 V 187 D 187 Lens Min Object Distance 0 3m Infinity Focus Control Manual Lens Type Fixed Lens Mount Type Board Type M12 English _113 appendix Operational Description Items SNF 8010 SNF 8010VM Camera Title Displayed up to 15 characters Day amp Night Auto Color B W Backlight Compensation BLC Wide Dynamic Range 60dB Contrast Enhancement SSDR Samsung Super Dynamic Range Off On Digital Noise Reduction Digital Image Stabilization DNR 2D 3D Noise Filter Function Name SSNR Defog Motion Detection Off On 4e
152. to gt Schedule Set the time during which the camera is operated in the color mode e Dwell Time It specifies the period for which the selected brightness condition must be maintained to switch the lighting mode from Day to Night or vice versa e Duration It specifies the interval of lighting mode conversion e Activation time It specifies the schedule for color mode operation a If itis set the Color mode is maintained from 00 second of the starting time to 59 second of the ending time English _77 Setup screen OSD Setup 1 Select lt OSD gt 2 Select each item and set it properly e Camera title Specify whether or not to display the camera title on the screen You can enter up to 15 characters for the title e Camera title X Y Specify the coordinates where the camera title is displayed on the screen e Date amp Time You can set the date and time and if they should be displayed on the screen e Date amp Time X Y Set the position of time to be displayed on the screen e Weekday overlay You can display the day on the screen e PTZ position Set the PTZ location on the screen e Preset name Specify whether or not to display preset name on the screen fh Aposition adjustable item Camera title Date amp Time may not be displayed normally if it overlaps with another fixed OSD item PTZ position appears on the bottom left of the screen and it cannot move to other area Use this inf
153. ton to format the NAS on your own Due to network access errors you might be unable to save the NAS temporarily The data traffic will increase when the camera is set to higher resolution higher bit rate and or higher framerate If there is too much data traffic some frame may be skipped although it is stored in a full frame When a frame skip occurs images are saved at the rate of min one image per sec 92_ setup screen NAS Network Attached Storage guide When you use the NAS you might be unable to save data due to temporary network disconnections If the setting allows a Micro SD memory card and the NAS to be simultaneously connected for use the higher priority for recording goes to the NAS If you activate Overwrite to the NAS by setting it to lt On gt and the available capacity is below 1 it will be saved in the Micro SD card If you are saving data in the NAS you might be unable to save it when you insert a Micro SD memory card used by another camera NAS recommended specs Refer to NAS recommended specs Page 11 If you change the NAS saving while saving data in the NAS it will not be reflected in the system immediately If you remove NAS equipment on your own while saving data or if the network is disconnected NAS saving operation will be terminated abnormally As a rule of thumb you are recommended to use one NAS sharing directory per camera without duplicated use The following is a descr
154. tortion Compensation may influence the video resolutions English _59 N3JJY0S dNLAS Setup screen To Add Change the Video Profile The profile setup can be added or modified to accommodate various profiles depending on the recording conditions 1 Select one from the lt Video profile gt options 2 Provide the name and select a codec 3 Specify the conditions under which the codec will be applied 4 Select the type of the Fish Eye View e Source View Shows the original video images from camera e Dewarp View Calibrates the system to show the 360 wrap around view of the video images 5 Specify the details of the selected codec including resolution and frame rate Click lt Advanced gt to display the context menu e Resolution Set the video size of the H 264 and MJPEG files e Framerate Set the max number of video frames per sec e Maximum bitrate Set the max bit rate of video when the bit rate control is set to VBR T As the bit rate can be adjusted limitedly according to the resolution frame rate and screen complexity the actual bit rate can be greater than the maximum bit rate So you must consider the use conditions when setting the value e Target bitrate Set the target bit rate when the bit rate control is set to CBR e Bitrate control You can select one from constant bit rate and variable bit rate for compression Fixed bitrate means that the network transmission bitrate is fixed while varying the
155. ull screen 52_ web viewer Description The section in the specific period is played by moving the time bar Set the search date using the calendar m f there is data saved in your Micro SD memory card or NAS on the day it is marked as a box on the calendar To listen to a voice signal if present in the recorded video then activate the voice signal icon when you play it The camera image is converted to fit the Web browser window Regardless of the resolution setup configured in the camera it sets the resolution to 800x600 Press it again to switch back to the default resolution The current image is saved as a jpg image file The current image is converted to cover the maximum size of the monitor Item Description 8 Video information Time data of the replayed video is displayed on the screen Set the desired date to make a backup copy of video data saved in your 9 Backup Micro SD memory card or NAS m Can be set as up to 5 minutes aaMJI GAM To play after searching by time 1 Click Time Search A 2 Click a desired date in the calendar The video on the specified date will be played 3 If the video playback is stopped select a time and click Play ER The video on the selected time will be played 4 While the video is being played the recording time for the current video will be shown 5 Search for the video forward or backward and control the play speed How to Control
156. ur NAS e P address Unique IP address assigned to the NAS e ID An ID registered in the NAS e Password Password registered in the NAS e Default folder Designate the NAS user folder to save data in 3 Click the Test button to see if you can successfully connect to the NAS i a lf the success message is displayed it means that you can successfully save data in the NAS f the fail message is displayed check the following Confirm that the IP address of the NAS is valid Confirm that the ID password of the NAS is valid Confirm that you can access the folder designated as the default folder using the ID of the NAS Confirm that the NAS SMB CIFS items are unchecked English _91 Setup screen Confirm that the NAS IP address and the camera IP address are in the same format ex The NAS amp camera subnet mask initial value is 255 255 255 0 If the IP address is 192 168 20 32 then the NAS IP address should be in the range of 192 168 20 1 192 168 20 255 Check whether you tried to access as another user without formatting the default folder saved or used Confirm that you used recommended NAS equipment 4 Once the setting is complete change the setting of the NAS from lt Off gt to lt On gt and click the Apply EZH button 5 Access the NAS to check the available capacity and the total capacity 6 If the capacity is insufficient check the data and click the Format but
157. ux e BSD2 0 lighttpd 1 4 26 http www lighttod net MiniUPnP Project Client http miniupnp tuxfamily org e MIT License Prototype JavaScript Framework 1 7 http prototypejs org e libxml2 License lipxml2 http xmlsoft org e OpenSSL License openssl 0 9 8 http www openssl org e PHP 3 01 License php 5 3 2 http Avww php net GNU GENERAL PUBLIC LICENSE Version 2 June 1991 Copyright C 1989 1991 Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 13801 USA Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed Preamble The licenses for most software are designed to take away your freedom to share and change it By contrast the GNU General Public License is intended to guarantee your freedom to share and change free software to make sure the software is free for all its users This General Public License applies to most of the Free Software Foundation s software and to any other program whose authors commit to using it Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead You can apply it to your programs too When we speak of free software we are referring to freedom not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for this service if you wish that you receiv
158. val gt Specify the lt Activation time gt From the Setup menu select the lt Event F gt tab e Always Always activates in operated mode at the set interval e Only scheduled time Periodically BEES CELE EEE activates in operated mode at a specified time and date Specify the activation conditions e FIP Specify the use of the FTP transfer if an event occurs Refer to FTP E mail for more details page 88 When done click Apply English _99 N3JY0S dNLIJS Setup screen Tampering detection You can set to detect tampering attempts and trigger events such as sudden change of camera s framing direction blocked lens and other overall change of scenes from the video 1 From the Setup menu select the lt Event F gt tab 2 Click lt Tampering detection gt 3 Set whether or not to lt Enable gt 4 Set the tampering detection sensitivity The higher the sensitivity detects the minutest tampering attempts 5 Specify the activation time and activation condition For more information about lt Activation time gt and lt Action gt refer to Alarm input page 97 6 When done click Apply BEE ay Tempering detection works based on state of the Source View screen of lt Video profile gt When tempering appears in the Source View screen the alarm goes off even if no tempering occurs in the Dewarp view The default tampering detectio
159. ve work of the Library even though the source code is not Whether this is true is especially significant if the work can be linked without the Library or if the work is itself a library The threshold for this to be true is not precisely defined by law If such an object file uses only numerical parameters data structure layouts and accessors and small macros and small inline functions ten lines or less in length then the use of the object file is unrestricted regardless of whether it is legally a derivative work Executables containing this object code plus portions of the Library will still fall under Section 6 Otherwise if the work is a derivative of the Library you may distribute the object code for the work under the terms of Section 6 Any executables containing that work also fall under Section 6 whether or not they are linked directly with the Library itself 6 As an exception to the Sections above you may also combine or link a work that uses the Library with the Library to produce a work containing portions of the Library and distribute that work under terms of your choice provided that the terms permit modification of the work for the customer s own use and reverse engineering for debugging such modifications You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License You must supply a copy of this License If the work
160. versions of the software inside them although the manufacturer can do so This is fundamentally incompatible with the aim of protecting users freedom to change the software The systematic pattern of such abuse occurs in the area of products for individuals to use which is precisely where it is most unacceptable Therefore we have designed this version of the GPL to prohibit the practice for those products If such problems arise substantially in other domains we stand ready to extend this provision to those domains in future versions of the GPL as needed to protect the freedom of users Finally every program is threatened constantly by software patents States should not allow patents to restrict development and use of software on general purpose omputers but in those that do we wish to avoid the special anger that patents applied to a free program could make it ffectively proprietary To prevent this the GPL assures that atents cannot be used to render the program non free he precise terms and conditions for copying distribution and modification follow TERMS AND CONDITIONS 0 Definitions This License refers to version 3 of the GNU General Public License Copyright also means copyright like laws that apply to other kinds of works such as semiconductor masks The Program refers to any copyrightable work licensed under this License Each licensee is addressed as you Licensees and recipient
161. video frames for H 264 compression indicating a collection of frames from the initial Frame key frame to the next I Frame GOV consists of 2 kinds of frames l Frame and P Frame Frame is the basic frame for the compression also Known as Key Frame which contains one complete image data P Frame contains only the data that has changed from the preceding l Frame For H 264 codec you can determine the GOV length 1 160 English _61 Setup screen User 1 From the Setup menu select the lt Basic gt tab 2 Click lt User gt 3 Provide the e Administrator password change Change the password for the administrator m For the security purposes you are recommended to use a combination of numbers alphabets uppercase and lowercase and special characters for your password necessary user information a tis recommended to change your password once every three months The password length and limits are shown as follows 62_ setup screen A combination of at least two types of upper case lower case numeric and special characters 8 to 15 characters Should be different from the ID Cannot repeat the same letter number of special characters more than three times Cannot use three consecutive letters e g abc 123 321 or ASCII code values in the sequential increasing or decreasing order Special characters that are allowed _ If When accessing the
162. will be restored automatically Once completed with editing click Apply to apply changes and the browser exits After a while connect again with the changed IP English _65 Setup screen 5 Type in each item in the Port menu as necessary Neither the port range between 0 and 1023 nor port 3702 is available e HTTP HTTP port used to access the camera via the web browser The default is 80 TCP Setting the HTTP port for Safari and Google Chrome browsers to 65535 is not allowed by security policy e HTTPS In this version the security of the web communication protocol HTTP is strengthened It can be used when you set HTTPS mode in SSL The initial value is set to 443 TCP The available setting range is 1024 65535 For security reasons in your Safari or Google Chrome browser you may not use 65535 as your HTTPS port e RTSP Used to transfer videos in the RTSP mode the default is 554 e Use timeout When connecting to RTSP this function resets the connection if there s no response for a certain time e Device port Set a port used to transfer video signals with the Samsung protocols g f changed the HTTP port the browser exits Afterwards address should contain the newly assigned HTTP port trailing the IP ex IP address 192 168 1 100 HTTP port Assigned 8080 http 192 168 1 100 8080 If HTTP port is set to 80 no need to specify the port number 6 When done click Apply EE Event setu
163. wind the three nuts in a clockwise direction to remove the top cover Note that it is not necessary to loosen the screws completely 16_ installation amp connection Installing the camera on the ceiling or a wall 1 Select a location where you want to install the camera 2 Insert the provided screw into the camera hole and turn it clockwise Fixing Hole 3 Using the L shaped wrench or drill bit fasten the top cover in place in a clockwise direction NOILOANNODO 8 NOILLVTIVLSNI Z gt 1S ail MIC lt SNF 8010 gt lt SNF 8010VM gt o m T fix the cover you should match the triangular arrows to assemble correctly m f the cover is not fixed tightly you may encounter a problem with waterproofing IP66 SNF 801 OVM English _17 Installation amp connection Outdoor installation SNF 8010VM When you install the camera outdoors it should be waterproofed with waterproof butyl rubber tape which can be purchased in stores so that water does not leak from the gap of the cable connected in the outdoor area 1 oe the power audio I O and LAN 1T 2 Wrap the black cable jacket Area A and the ina cable connection area with waterproof butyl EEA rubber tape so that more than half of the butyl rubber tape is overlapped ii 4 v 4 Camera Ei HHH ED System If the cable jacket is not waterproofed properly I f a m then it can directly cause leakage Make sure to protect th
164. y Finland Supported OS Windows XP VISTA 7 8 MAC OS X 10 7 l Supported Browser Microsoft Internet Explorer Ver 8 11 Web Viewer Mozilla Firefox Ver 9 19 Google Chrome Ver 15 25 Apple Safari Ver 6 0 2 Mac OS X 10 8 10 7 only 5 1 7 Mac OS X only Central Management Software 118_ appendix SSM Smart Viewer I Polis Mobile Viewer Description Items SNF 8010 SNF 8010VM 30 C 55 C 22 F Operating Temperature 10 C 55 C 14 F 131 F Less than 90 RH Humidity 131 F Less than 90 RH Start up should be done at above 25 C Environmental Storage Temperature Humidity 30 C 60 C 22 F 140 F Less than 90 RH Ingress Protection IP66 Vandal Resistance IK10 TONE UL CE FCC RoHS Gost KC Standard Certification UL CE FCC RoHS Gost KC EN 61373 EN 50155 DC12V 10 PoE DC12V 10 PoE Electrical Input Voltage Current EEE802 af Class3 a Class3 mode Power Consumption Max 10 3W PoE Class3 Max 8 7W DC 12V Color Material IVORY Aluminum NON Aunar dear l Dome Cover Mechanical Dimension x H 0145 9 x H49 6 mm 0145 9 x H62 4 mm Weight 780g 800g English _119 XIGNAddV appendix PRODUCT OVERVIEW SNF 8010 Unit mm inch 49 6 1 95 145 9 5 74 3 4 8 1 2 HOLE 16 45 9 1 81 127 8 5 03 72Q0 26 5 1 04 120_ appendix SNF 8010V
165. y are physically damaged If the Error message does not disappear after following the instructions replace the Micro SD card English _89 N3aYOS dNLIJS Setup screen To make recording on the Micro SD memory 1 Check the memory card s lt Free size gt and lt Total size gt 2 Otherwise check the stored data and if you find them not important then click lt Format gt to format the Micro SD memory some frames may be skipped if the Micro SD memory card operates at the lower speed than recommended For more details refer to Recommended Micro SD SDHC SDXC Memory Card Specifications Page 10 For a Micro SD memory card with a large capacity the formatting will be slowed down accordingly The data traffic will increase when the camera is set to higher resolution higher bit rate and or higher framerate If there is too much data traffic some frame may be skipped although it is stored in a full frame When a frame skip occurs images are saved at the rate of min one image per sec 3 Specify the storage action Record profile Shows recording profile s codec type Normal Make recording at a certain frame rate Event Set the recording type for a certain event that occurs Pre event duration Specify the time point before the occurrence of the alarm starting from the time point the images will be transferred You can specify up to 5 seconds before the occurrence of the alarm Post even

Download Pdf Manuals

Related Search

Related Contents

Turbo NAS hardware manual  Copyright © 2011 myPhone. All rights reserved. myPhone  特 記 仕 様 書 旭川市維持管理業務委託  MODE D`EMPLOI LA SÉRIE DREAM™  製品マニュアル - Providence  東北地方太平洋沖地震に関するお知らせ  

Copyright © All rights reserved. Failed to retrieve file