Hardware Installation Guide
Contents
1. Hardware Installation Guide Outdoor Wireless Bridge Access Point This Hardware Installation Guide describes the steps necessary to successfully mount the Outdoor Wireless Bridge Access Point Refer to the User s Manual for configuration details Choosing the Right Location Since this is a radio device and works in the 2 4 GHz frequency range for optimum utilization install this product away from microwave ovens or other devices operating in the 2 4 GHz frequency range which can Cause signal interference Install this device s antenna in an area where the trees buildings and large steel structures do not obstruct the signal to and from the antenna In conclusion the antenna should be located in the higher direct line of sight space Ethernet amp Power Cables Unlock and open the case Connect the power cord to the DC IN port on the rear panel of the DC Injector Connect an Ethernet cable to the RJ 45 port To LAN on the rear panel of the DC Injector Use the straight cable to connect to the HUB SWITCH or use the crossover cable to connect to the PC s Network Interface Card NIC Connect an Ethernet cable to the other RJ 45 port To Bridge on the rear panel of the DC Injector and connect the other end to the LAN1 PoE port on the side of DC Converter e wa oa on Mounting Bracket on the Wall Use the mounting bracket provided in the package to mount the device on the wall and then secure the RJ 45 cable o2. n the wall by nailing in the hooks which are also provided Mounting Bracket on the Mast with U bolts Use the mounting bracket provided in the package to mount the device on the mast then secure the RJ 45 r cable on the mast by using the ties Neza which are also provided Hardware Installation Guide
Download Pdf Manuals
Related Search