Limited Warranty
Contents
1. If you experience difficulty with your system call Toll Free for Customer Assistance 1 800 843 3544 U S A or 1 952 943 2252 International If it is necessary to return the system for service your Customer Service Representative will give you a Return Authorization Number RA and shipping instructions Pack the system carefully and send it to Williams Sound Attn Repair Dept 10300 Valley View Road Eden Prairie MN 55344 YP WILLIAMS SOUND 10300 Valley View Rd e Eden Prairie MN 55344 800 328 6190 952 943 2252 FAX 952 943 2174 www williamssound com 2012 Williams Sound All Rights Reserved MAN 169A YS WILLIAMS SOUND CHG 1012 Digi Vave 12 Bay Charger MANUAL AND USER GUIDE Multi bay drop in style charger For use with the Williams Sound Digi Wave DLT 100 MAN 169A CHG 1012 Digi Wave 12 Bay Charger Figure 1 CHG 1012 Digi Wave 12 Bay Charger Instructions 1 Plug the power supply into the AC wall outlet Plug the power connector into the rear of the CHG 1012 unit 2 Insert the DLT 100s into the charging slot as illustrated in Figure 1 The unit s must be placed in the charger facing forward to mate with the connectors A red LED indicator on the DLT 100 will illuminate when charging has started When the batteries are fully charged a green LED is illuminated indicating the charger is in maintain mode You may charge up to 12 DLT 100s per CHG 1012. WILLIAMS SOUND THEREFORE DISCLAIMS ALL WARRANTIES NOT S ET FORTH ABOVE BOTH EXPRESS AND IMPLIED WITH RESPECT TO THE CHG 1012 DIGI WAVE 12 BAY CHARGER INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WILLIAMS SOUND SHALL NOT BE LIABLE TO ANY PERSON OR ENTITY FOR ANY MEDICAL EXPENSES OR ANY DIRECT INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY ANY USE DEFECT FAILURE OR MALFUNCTION OF THE PRODUCT WHETHER A CLAIM FOR SUCH DAMAGES IS BASED UPON WARRANTY CONTRACT TORT OR OTHERWISE THE SOLE REMEDY FOR ANY DEFECT FAILURE OR MALFUNCTION OF THE PRODUCT IS REPLACEMENT OF THE PRODUCT NO PERSON HAS ANY AUTHORITY TO BIND WILLIAMS SOUND TO ANY REPRESENTATION OR WARRANTY WITH RESPECT TO THE CHG 1012 DIGI WAVE 12 BAY CHARGER UNAUTHORIZED REPAIRS OR MODIFICATIONS WILL VOID THE WARRANTY The exclusions and limitations set out above are not intended to and should not be construed so as to contravene mandatory provisions of applicable law If any part or term of this Disclaimer of Warranty is held to be illegal unenforceable or in conflict with applicable law by a court of competent jurisdiction the validity of the remaining portions of this Disclaimer of Warranty shall not be affected and all rights and obligations shall be construed and enforced as if this Limited Warranty did not contain the particular part or term held to be invalid
3. 2 charger It will take approximately five hours to fully charge the batteries NOTE It is safe to leave the DLT 100s in the charger even after the batteries are fully charged Troubleshooting If no LEDs light up 1 Check that the power supply is plugged into the AC outlet 2 Be sure the DLT 100 is facing forward in the charger see Figure 1 NOTE New batteries have various charge conditions therefore some batteries may take less time to fully charge Charging batteries generates heat The DLT 100s charger and power supply will feel warm when charging Do not charge batteries in a closed enclosure such as a carry case or brief case To ensure full battery charging turn off the DLT 100 when recharging the batteries MAN 169A CHG 1012 Digi Wave 12 Bay Charger Specifications CHG 1012 Digi Wave 12 Bay Charger Dimensions charger only 9 L x 7 W x 1 6 H 23 cm Lx 17 8 cm W x 4 cm H Weight 3 3 lbs 1 5 kg including power supply Enclosure Black ABS plastic with metal base Power Supply Input TFP 047 90 240 VAC input 1 5 A max Power Supply Universal DC adapter 5 VDC 6A output center positive Charging Time 5 hours nominal Unit Capacity 12 Units Indicators Charge status indicators on DLT 100 Warranty 2 year cables and power supply warranty for 90 days Approvals CE FCC WEEE RoHS CB NOTE Eight separate CHG 1012s each
4. CHG 1012 Digi Wave 12 Bay Charger For Customers in the United States WARNING Use a three wire grounding type line cord as is supplied with the product Do not defeat the safety purpose of the grounding type plug A grounding type plug has two blades and a third grounding prong The third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet This equipment has been tested and found to comply with the limits for Class B digital device pursuant to part 15 of the FCC rules For customers in Canada This Class B digital device meets all requirements of the Canad ian Interference causing Equipment Regulations Cet appareil num rique de la classe B respecte toutes les exigencies du R glement sur le mat riel brouilleur du Canada Limited Warranty Williams Sound products are engineered designed and manufactured under carefully controlled conditions to provide you with many years of reliable service Williams Sound warrants the CHG 1012 Digi Wave 12 Bay Charger against defects in materials and workmanship for TWO 2 years During the first two years 1012 Charger rom the purchase date we will promptly repair or replace the CHG Microphones earphones headphones batteries cables carry cases and all other accessory products carry a 90 day warranty WILLIAMS SOUND HAS NO CONTROL OVER THE CONDITIONS UNDER WHICH THIS PRODUCT IS USED
5. ods of time Be advised that different operating voltages require the use of different types of line cord and attachment plugs Check the voltage in your area and use the correct type Use only the power supply provided by Williams Sound Other power supplies may have similar specifications but may not be equivalent in emissions ratings in rush current etc Use of an unapproved power supply may leave the device partially or completely inoperable and will void the warranty This apparatus has been designed with class 1 construction and must be connected to a main socket outlet with a protective ground connection the third grounding prong Protect the power cord from being walked on or pinched particularly at plugs receptacles and near the power jack on the charger This apparatus must be grounded The MAINS plug or an appliance coupler is used as the disconnect device so the disconnect device should remain readily operable MAN 169A
6. powered by its own TFP 047 power supply can be connected to a 15amp circuit NOTE Specifications subject to change without notice Recycling Instructions OV Help Williams Sound protect the environment ZA 9 Please do not dispose of equipment or used batteries in the household trash Take the equipment to an electronics m recyciing center or return to the factory Take batteries to a retail or community recycling location Safety Warnings WARNING To reduce the risk of fire or electric shock do not expose the system to rain or moisture Do not use this apparatus near water The system should not be exposed to dripping or splashing and objects filled with liquids such as beverages should not be placed on the charger Clean only with a dry cloth Servicing or attempting to service this device will void the warranty Refer servicing to qualified personnel Servicing is required when the system has been damaged in any way if liquid has been spilled or objects have fallen into the unit if the unit has been exposed to moisture if the unit does not operate normally or if the unit has been dropped Do not block any ventilation openings Install in accordance with manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus that produces heat Use only attachments accessories specified by the manufacturer Unplug the unit during lightning storms or when unused for long peri
Download Pdf Manuals
Related Search