AmHaze UM - Chauvet Professional
Contents
1. Edition Notes Edition Notes Trademarks Copyright Notice Manual Usage Document Printing Intended Audience Disclaimer Document Revision The Amhaze User Manual Rev 05 covers the description safety precautions installation programming operation and maintenance of the Amhaze CHAUVET released this edition of the Amhaze User Manual in May 2012 CHAUVET is a registered trademark of CHAUVET A Sons Inc d b a CHAUVET amp or CHAUVET The CHAUVET6 logo in its entirety including the CHAUVET name and the dotted triangle and all other trademarks on this manual pertaining to services products or marketing statements example It s Green Thinking M are owned or licensed by CHAUVET Any other product names logos brands company names and other trademarks featured or referred to within this document are the property of their respective trademark holders CHAUVET owns the content of this user manual in its entirety including but not limited to pictures logos trademarks and resources Copyright 2012 CHAUVETE All rights reserved Electronically published by CHAUVETEO in the United States of America CHAUVET authorizes its customers to download and print this manual for professional information purposes only CHAUVET expressly prohibits the usage copy storage distribution modification or printing of this manual or its content for any other purpose without its written consent For better2. Send unit for repair Send unit for repair If you still experience technical problems after trying the above solutions or if you need to send the unit for repair contact CHAUVET Technical Support Amhaze User Manual Rev 05 Technical Information Returns Procedure E Claims Contact Us The user must send the merchandise prepaid in the original box and with its original packing and accessories CHAUVET will not issue call tags Call CHAUVET and request a Return Merchandise Authorization RMA number before shipping the unit Be prepared to provide the model number serial number and a brief description of the cause for the return The user must clearly label the package with a Return Merchandise Authorization RMA number CHAUVET will refuse any product returned without an RMA number DO NOT write the RMA number directly on the box Instead write it on a properly affixed label Once you have received the RMA number please include the following information on a piece of paper inside the box Your name Your address Your phone number The RMA number A brief description of the problem Be sure to pack the unit properly Any shipping damage resulting from inadeguate packaging will be the customer s responsibility As a suggestion proper UPS packing or double boxing is always a safe method to use CHAUVET reserves the right to use its own discretion to repair or replace returned product s
3. in 199 mm Note Dimensions in inches rounded to the nearest decimal digit Electrical Power Supply Type Range Conventional transformer 120 V 60 Hz or 230 V 50 Hz Parameter 120 V 60 Hz Consumption 830 W Operating current 6 95 A Circuit breaker 10A Power UO US Worldwide Power input connector Neutrik powerCON A Power Cord plug Edison US Parameter First heating up time cold hazer Heater temperature after warm up cycle completed Fluid consumption at 100 output Haze Production Approved fluid Tank capacity Output Thermal Max External Temperature Cooling System 104 F 40 C Fan DMX 1 0 Connectors Connector Type 3 and 5 pin XLR Sockets Ordering Product Name Item Code Amhaze 120 V 50 60 Hz 99070313 Amhaze 240 V 50 60 Hz 99070316 Amhaze PHF Premium 14070461 Haze Fluid Weight 46 3 lbs 21 kg Voltage Selection Fixed voltage models 240 V 50 Hz 900 W 3 75 A 5A Europe Neutrik powerCON6 A Local plug Value 4 minutes 446 F 230 C 4 7 ml per minute PHF 5 liters 3 000 cfm Channel Range 2 Item Number AMHAZE 220VAMHAZE PHF Amhaze User Manual Rev 05 Technical Information CHAUVET amp 5200 NW 108th Avenue Sunrise FL 33351 USA 800 762 1084 954 929 1115 FAX 954 929 5560 www chauvetlighting com Amhaze User Manual Rev 05 May 2012 PROFESSIONAL
4. results print this document in color on letter size paper 8 5 x 11 inches double sided If using A4 paper 210 x 297 mm configure your printer to scale the content accordingly Any person in charge of installing operating and or maintaining this product should read the guide that shipped with it as well as this manual in their entirety before installing operating or maintaining this product CHAUVET believes that the information contained in this manual is accurate in all respects However CHAUVET assumes no responsibility for any error or omissions in this document CHAUVETO reserves the right to revise this document and to make changes from time to time in the content hereof without obligation of CHAUVET to notify any person or company of such revision or changes This does not constitute in any way a commitment by CHAUVET to make such changes CHAUVETO may issue a revision of this manual or a new edition of it to incorporate such changes The Amhaze User Manual Rev 05 supersedes all previous versions of this manual Please discard any older versions of this manual you may have whether in printed or electronic format and replace them with this version Author Date Editor Date D Couppe 5 14 12 M Graham 11 22 11 Amhaze User Manual Rev 05 Table of Contents Table of Contents 1 Before VOU 0 iu MS cn ne a Lad Yu ve I O a ane en OL 1 What IS Included PR DDUG DDUG DDTF DNRFAFFFF
5. you are certified Please refer to all applicable local codes and regulations for the proper installation of this product ALWAYS disconnect this product from its power source before cleaning ALWAYS connect this product to a grounded circuit to avoid the risk of electrocution DO NOT touch the output nozzle on this product It is very hot during operation and it may remain hot for several hours after turning the unit off DO NOT add any flammable liguid alcohol perfume oil gasoline etc to the fog liguid DO NOT drink the fog liguid If ingested call a doctor at once DO NOT allow the fog liguid to touch your skin or eyes Rinse affected area with plenty of water and call a doctor DO NOT install this product where it may be exposed to rain or moisture NEVER hang this product although product may be mounted to the top of truss with a ratchet strap DO NOT mount this product on a flammable surface e g wood linoleum carton plastic or carpet ALWAYS install this product in a location with adequate ventilation at least 20 in 50 cm from adjacent surfaces ALWAYS make sure that there are no flammable materials close to the unit while operating ALWAYS use the handles to carry this product NEVER connect this product to a dimmer pack or rheostat NEVER disconnect this product by pulling or tugging on the power cable ALWAYS make sure that you are connecting this product to the proper voltage as per the specification
6. HFNFNFRFNFHNNFNRNRRHNFUTFHFNYAWFF EEN 1 Unpacking ue 1 GIE Un 1 Typographic Comventons sis 1 CON cia 1 Productata 1 Safety Notes cui ari 2 MT Te EE 3 7 3 IT 3 Additional 3 Produc OVGIVIEW PRE RR RC RHY FARF NEF NHY NF RWY aa 4 PA 5 AG FONET an A A Y MG NEA dt 5 AG 0 divan 5 Resetting the Breaker sna e eiu i Ge dr ML id 5 6 DMX Mode cc a olas 6 Mol IN srta ltda 6 Orientation arca do tence 6 attoo liate A e E a EE E AE OA E cere 6 4 Operation ee eee ee ne ey Gain eer 7 ele EE H Control Panel 2050 H EI o 7 8 8 Continuous Operation iii 8 9 Timer Mode Paramet TS eii TY Yn ue Fu deidades gnn YNN 9 9 Continuous DMX Address nyny EEN ddy FFY Lly iaa 9 DIX Valles aunar mc NN YY ANY NN NN NN NN NW NW NN NN NN HN NN NN Y NY E A AAT 9 2 3 006 iei acs oh Get Dy ae e CYFF ta 9 Menu Map iii 10 5 Technical Information 2 11 Fazer Maintenance aew Se eS 0 11 Storage y Yd A FO TY o A gyd ME A 11 Troubleshooting auides un WY A E Fd 12 Returns Procede FE y 13 RUE 13 Contact WS uii cL aaa ia ls 13 Technical 14 Amhaze User Manual Rev 05 Amhaze User Manual Rev 05 Before You Begin 1 Before You Begin What Is Included Unpacking Instructions Claims Typographic Con
7. The carrier is responsible for any damage incurred during shipping to this product or any part that shipped with it Therefore if the received merchandise appears to have damages caused during shipping the customer must submit the damage report and any related claims with the carrier not CHAUVET The customer must submit the report upon reception of the damaged merchandise Failure to do so in a timely manner may invalidate the customer s claim with the carrier For other issues such as missing components or parts damage not related to shipping or concealed damage the customer must make claims to CHAUVET within seven 7 days of receiving the merchandise World Headquarters United Kingdom amp Ireland CHAUVET CHAUVET Europe Ltd General Information General Information Address 5200 NW 108 Avenue Address Unit 1C Sunrise FL 33351 Brookhill Road Industrial Estate Voice 954 929 1115 Pinxton Nottingham UK Fax 954 929 5560 NG16 6NT Toll free 800 762 1084 Voice 44 0 1773511115 Fax 44 0 1773 511110 Technical Support Technical Support Voice 954 929 1115 Press 4 Email uktech chauvetlighting com Fax 954 756 8015 Email tech chauvetlighting com World Wide Web World Wide Web www chauvetlighting com www chauvetlighting co uk Amhaze User Manual Rev 05 Technical Information Technical Specifications Dimensions and Length Width Height Weight 24 in 610 mm 20 9 in 530mm 7 8
8. alue to be entered or selected in a menu Icon Meaning This icon indicates critical installation configuration or operation A information Failure to comply with this information may render the product partially or completely inoperative damage third party equipment or cause harm to the user This icon indicates important installation or configuration O information Failure to comply with this information may prevent the product from functioning correctly E This icon indicates useful although non critical information The term DMX used throughout this document refers to the USITT DMX512 A transmission protocol Use on Dimmer Auto Programs Outdoor Use Auto ranging Power Supply Sound Activated Resettable Breaker DMX User Serviceable X lt xx X y Xx Master Slave Duty Cycle Amhaze User Manual Rev 05 Before You Begin Safety Notes N D Personal Safety Mounting and Rigging Power and Wiring Operation E There is risk of burns or electric shock while operating this product Read all the following Safety Notes before working with this product These Notes include important information about the installation usage and maintenance of this product There are no user serviceable parts in this product Any reference to servicing in this User Manual applies only to properly certified CHAUVET technicians Do not open the housing or attempt any repairs unless
9. e instructions in the Preparation section to setup the AmhazeTM once properly located Amhaze User Manual Rev 05 Operation 4 Operation Preparation Once installed you have to prepare the Amhaze for operation To do so follow these steps 1 Open both ends of the flight case Pull out the fluid tank Remove the cap of the fluid tank Verify that the two plastic hoses attached to the cap are in place and in good condition Pour Chauvet PHF haze fluid inside the tank Replace the cap of the fluid tank making sure that is tightly closed Reinsert the tank Make sure that the plastic hose that goes from the cap to the hazer is not bent To direct the haze up or down pull the haze guide from the front panel and install it in the desired position Pon 4 01 satisfactory results In addition the unapproved fluid can damage the Amhaze or O Only use CHAUVET6 approved PHF haze fluid Otherwise you might not have cause harm to humans or animals Control Panel Before using the Amhaze you should become familiar to the control panel Description The table and diagram below will provide you with a description of its buttons and functions Button Function lt FUNCTION gt Enters the programming mode lt VOLUME gt Controls the haze pump to modify the output volume lt TIMER gt Starts the timer controlled operation lt STOP gt Stops the current operation whether manual or ti
10. er Silent operation Neutrik powerCON6 A connector 3 and 5 pin DMX input and output connectors LCD display Amhaze User Manual Rev 05 Introduction Product Overview 7 8in 199 mm Control Panel LCD Control Panel Buttons 3 amp 5 pin DMX connectors Amhaze User Manual Rev 05 Setup 3 Setup AC Power N D AC Plug A Resetting the Breaker This product comes in two models each with a fixed input voltage power supplies either 120 V 60 Hz or 230 V 50 Hz Therefore you have to order the correct model for the line voltage in your area Make sure that you are connecting this product to the proper voltage as per the specifications in this guide or on the product s sticker Always connect this product to a protected circuit with an appropriate electrical ground to avoid the risk of electrocution or fire The listed current rating indicates the maximum current draw during normal operation For more information download the document Sizing the Circuit Breakers from the CHAUVET website www chauvetpro com Never connect this product to a rheostat variable resistor or dimmer circuit even if the rheostat or dimmer channel serves only as a 0 to 100 switch The Amhaze comes with a power input cord terminated with a Neutrik powerCON A connector on one end an Edison plug on the other end US market If the power input cord that came with your product has no plug or y
11. fluid generates no haze Lack of fluid Follow the fluid replenishment procedure Faulty pump Send unit for repair Be Erroneous haze volume adjustment Adjust haze volume as explained ee ont Banus Wrong fluid Clean the hazer and use approved fluid Faulty pump Send unit for repair Circuit breaker fuse keeps tripping blowing Excessive circuit load Short circuit along the power wires Reduce total load placed on the electrical circuit Check electrical wiring Unit does not power up No power Loose or damaged power cord Built in breaker tripped Faulty internal power supply Check for voltage on outlet Check power cord Follow instruction to reset the breaker Send unit for repair Unit does not respond to wired DMX or responds erratically D Wrong DMX addressing Damaged DMX cables Wrong polarity on the controller Loose DMX cables Non DMX cables Bouncing signals Long cable low level signal Too many units Interference from AC wires Faulty DMX interface Faulty Main board Check unit addressing Check DMX cables Check polarity switch settings on the controller Check cable connections Use only DMX compatible cables Install terminator as suggested Install an optically coupled DMX splitter before a long section of cable or right after the unit with the strong signal Install an optically coupled DMX splitter after unit 32 Keep DMX cables separated from power cables or fluorescent black lights
12. l produce haze in pre configured time intervals defined by the TIME INTERVAL and TIME DURATION menu options In addition the output volume during Timer mode is set by the TIMER VOLUME menu option See the Programming section for details about how to configure these parameters To operate in Timer mode do the following Press lt TIMER gt the display will show a countdown of the Interval Timer When the counter reaches zero 0 the Amhaze will start producing haze The hazing duration is set by the TIMER DURATION menu option The hazing volume during Timer mode is set by the TIMER VOLUME menu option This cycle will repeat itself until you press lt STOP gt again or until the Amhaze runs out of fluid 23 5 The Amhaze can produce continuous haze without reheating This means that hazing will start immediately each time the Interval timer reaches zero 0 In the Continuous mode the Amhaze will produce haze without interruptions The output volume is set in the VOLUME MODE OUT menu option See the Programming section for details about how to configure this parameter To operate in Continuous mode do the following 1 Press lt VOLUME gt the display will show VOLUME MODE OUT and the percentage of the output volume 2 This mode will continue itself until you press lt STOP gt or until the Amhaze runs out of fuel The Amhaze can produce continuous haze without reheating This means that hazing wi
13. ll start immediately each time you press lt VOLUME gt Amhaze User Manual Rev 05 Operation Programming Timer Mode Parameters Continuous Mode Parameters 8 DMX Address DMX Values 2 Channel Mode The Programming mode allows you to change the options that affect the various operating modes as well as setting the DMX address These parameters determine the on and off intervals as well as the output volume when the Amhaze is in Timer mode To configure these parameters do the following Press lt FUNCTION gt repeatedly until TIME INTERVAL shows on the display Use lt UP gt or lt Down gt to set the time off timer 1 200 s Press lt FUNCTION gt repeatedly until TIME DURATION shows on the display Use lt UP gt or lt Down gt to set the time on 1 200 s Press lt FUNCTION gt repeatedly until TIMER VOLUME shows on the display Use lt UP gt or lt Down gt to set the haze volume 1 100 D O1 D These parameters affect the haze and fan volumes when the Amhaze operates in Continuous mode To configure these parameters do the following 1 Press lt FUNCTION gt repeatedly until VOLUME MODE OUT shows on the display 2 Use lt UP gt or lt Down gt to set the haze volume 1 100 3 Press lt FUNCTION gt repeatedly until VOLUME MODE FAN shows on the display 4 Use lt UP gt or lt Down to set the fan volume 1 100 During stand by periods the fa
14. mer controlled Enables the currently displayed menu or sets the currently selected value ENTEU in to the current function lt UP gt Navigates upward through the menu list and increases the numeric value when in a function lt DOWN gt Navigates downward through the menu list and decreases the numeric value when in a function Control Panel Diagram al AGE FUNCTION KAES tl se Amhaze User Manual Rev 05 7 Operation Startup D Timer Operation Continuous Operation The Amhaze does not have an On Off switch As soon as you connect the Amhaze to the power outlet it will start operating To start up the Amhaze do the following 1 Insert the Neutrik powerCON6 A connector of the power input cord into the lockable blue socket on the back of the Amhaze 2 Turn the connector right until it locks in position 3 Plug the power input cords to a suitable power outlet the display will show Warm Up Cycle 4 Wait about two minutes for the warm up to complete During this time the Amhaze will not produce any haze 5 After warming up the display will show READY TO HAZE FLUID SENSOR ON OFF 6 Press lt VOLUME gt 7 Adjust haze output volume by using the lt UP gt or lt DOWN gt 8 Press lt STOP gt again to stop haze production Repeat the Startup procedure after transporting the Amhaze or after a fluid refill When in Timer mode the Amhaze wil
15. n volume resets to 20 to keep a low noise level This parameter determines the DMX starting address of the Amhaze Refer to the DMX Values section to learn the values and assignments of the AmHaze s 2 channel mode The following steps will show you how to configure the DMX starting address 1 Press lt FUNCTION gt repeatedly until DMX ADDRESS shows on the display 2 Use lt UP gt or lt Down to set the DMX starting address 001 511 Channel Function Value Percent Setting 000 005 No output T D Volume 006 255 2 100 2 Fan Volume 000 255 20 100 Amhaze User Manual Rev 05 Operation Menu Map FLUID Sensor Auto Display Go un I I Mode Vv Vv CHAUVET AMHAZE ADD l Displayed for 2 seconds FLUID ERROR FLUID IN WARM UP CYCLE READY TO HAZE AIR PUMP ERROR Press lt Enter gt FLUID DELIVERY ON Press lt cFunctiona gt Functions Menu FLUID SENSOR OFF or ON Press lt Function gt to Navigate i i W y TIMER INTERVAL 1 200 sec TIMER DURATION 1 200 sec FLUID SENSOR ON OFF TIMER VOLUME 1 100 VOLUME MODE OUT 1 100 VOLUME MODE FAN 20 100 DMX ADDRESS 1 512 FIRMWARE VERSION REV X XX QUICK START ON OFF Press lt Enter gt Use lt Up gt or lt Down gt change settings 10 Amhaze User Manual Rev 05 Technical Information 5 Technical Information Hazer Maintenance D S
16. ou need to change the plug use the table below to wire the new plug Connection Wire US Wire Europe Screw Color AC Live Black Brown Yellow or Brass AC Neutral White Blue Silver AC Ground Green Yellow Green Yellow Green Disconnect this product from the power outlet before resetting the breaker This product is equipped with a resettable circuit breaker on the power input circuit If the breaker trips all sections of this product will lose power Please see the instructions below for resetting this breaker 1 Remove the power cord from mains power 2 Allow unit to cool for 15 minutes 3 After 15 minutes you may attempt to reset the breaker by pressing the button with your index finger 4 Plug the product s power cord into the power outlet and continue using as recommended If the breaker does not reset the breaker button will not remain inserted contact CHAUVETO immediately as this indicates a possible internal malfunction Amhaze User Manual Rev 05 Setup DMX Linking DMX Mode Mounting Orientation Rigging Procedure You may link the Amhaze to a DMX controller using a standard DMX serial connection If using other DMX compatible units with this product it is possible to control them individually with a single DMX controller The Amhaze uses the standard DMX data connection for the 2 Channel DMX mode Refer to the Introduction chapter for a brief description of
17. s in this manual or on the product s sticker DO NOT operate this product if you see damage on the housing fluid tank or cables In any of these cases have the damaged parts replaced by an authorized technician at once DO NOT cover the ventilation slots when this product is operating to avoid internal overheating ALWAYS empty this product before storing or transporting it The maximum ambient temperature Ta is 104 F 40 C DO NOT operate this product at a higher temperature In case of a serious operating problem stop using this product immediately Depending on the amount of fog haze generated all fog machines may set off smoke detectors In the unlikely event that your CHAUVET product may require service please contact CHAUVET Technical Support Amhaze User Manual Rev 05 Introduction 2 Introduction Product Description Features Additional Features The Amhaze is a professional water based DMX controllable haze machine that provides continuous output with various degrees of density It consists of a chassis that contains the pump fan power supply DMX connections and control panel lt comes installed in a stackable flight case that also provides room to keep the fluid tank during operation Operating mode 2 channel Output volume fan speed Continuous output Haze output and fan speed controllable locally or via DMX Stackable flight case Onboard system timer Resettable circuit break
18. this mode Refer to the Operation chapter to learn how to configure the Amhaze to work in this mode The DMX Values section will provide you with detailed information regarding the DMX modes Before mounting this product read and follow the Safety Notes in this manual Always mount this product in any safe position while making sure that there is adeguate room around it for ventilation configuration and maintenance CHAUVET recommends following the general guidelines below when mounting this product When selecting an operation location consider ease of access to this product for operation programming adjustments and routine maintenance as well as the vicinity to a suitable power outlet Make sure to mount this product away from any flammable material as indicated in the Safety Notes section Never mount the product in places where rain high humidity extreme temperature changes or restricted ventilation may affect it Never mount this product on a flammable or heat sensitive surface such as carpet linoleum wood paper carton or plastic Never hang this product although product may be mounted to the top of truss with a ratchet strap Make sure that the place on which you mount this product can safely support its weight without vibrations See the Technical Specifications for weight and size details The Amhaze comes in a stackable flight case You only need to find a suitable place to set it up Follow th
19. torage D Do not allow the hazer to become contaminated After 40 hours of continuous operation it is recommended to run a cleaning solution composed of 80 distilled water and 20 distilled vinegar through the system to prevent the accumulation of particulate matter in the heating element The recommended cleaning routine is as follows Empty all fog liquid from the machine Add cleaning solution to tank Plug unit in and allow it to warm up Run the unit in a well ventilated area until the tank is almost empty Do not allow the pump to run dry Cleaning is now complete Before operating the hazer after cleaning it do the following 1 Refill with fog liquid 2 Run the machine briefly to clear any cleaning solution from the pump and heater oo one Refrain from spinning this product s fan s using compressed air Before storing this product run distilled water not tap water through the system as described in the cleaning method above This will help to avoid any particles condensing inside the pump or heater It is strongly recommended to test run the machine on a monthly basis in order to achieve its best hazing condition NEVER operate the hazer without fluid at any time Amhaze User Manual Rev 05 Technical Information Troubleshooting Guide Symptom Cause s Action s Hazer is still cold Wait until hazer is ready to operate Unit powers up but it Wrong fluid Clean the hazer and use approved
20. ventions Icon Meaning E Product ata Glance One Amhaze with Flight Case One Power Cord 2 M One Fluid Tank 5 Liter One Warranty Card One User Manual Immediately upon receiving this product carefully unpack and check the container Make sure you have received all the parts indicated above and all the parts are in good condition If the container or the material inside the container the product and included accessories appear damaged from shipping or show signs of mishandling upon receipt notify the carrier immediately not CHAUVET Failure to notify the carrier in a timely manner may invalidate your claim In addition keep the container and all the packing material for inspection For other issues such as missing components or parts damage not related to shipping or concealed damage file a claim with CHAUVET within seven 7 days of receiving the merchandise Refer to the Contact Us section in this manual for addresses and phone numbers Convention Meaning 1 512 A range of values in the text 50 60 A set of mutually exclusive values in the text Claims A new term or a section or chapter in this document lt SET gt A button on the product s control panel Settings A product function or a menu option MENU gt Settings A sequence of menu options 1 10 A range of menu values from which to choose in a menu Yes No A set of two mutually exclusive menu options in a menu ON A unique v
Download Pdf Manuals
Related Search