XSJackT2 - Vodafone
Contents
1. the SIM card contacts to the base of the housing insert the SIM card into the card slot with the slanted corner first When the SIM card is provisioned it is coded so that it can only be used in the XSJackT2 device The SIM card cannot be used in a mobile phone User Manual 14 Step 2 Connect the external antenna The high performance antenna supplied is necessary to achieve good transmission and reception Please screw the antenna connector to the antenna connection Use extended antenna if required Step 3 Connecting electricity Use only the power supply supplied E Connect the power supply to the XSJackT2 E Plug the power supply into a mains socket Step 4 Connecting telephone E Connect the telephone cable from the XSJackT2 device to the telephone Note The telephone which is to be connected to the XSJackT2 must support dual tone multi frequency DTMF Modems cannot be connected to XSJackT2 For proper operation the maximum connecting cord length between phone and XSJackT2 should be bet ween 1 and 3 metres XSJack T2 Telephoning You can immediately make calls once a telephone is connected to the XSJackT2 and the SIM card is activated Pick up the telephone receiver The device checks the strength of the GSM sig nal The signal strength is shown by three LEDs on the front of the XSJackT2 You can hear the dial tone if the connection is good Enter the desired telephone number using2. 5 EC A copy of the original CE declaration of conformity can be found under the follow ing internet address http www 4g systems com Disposal information The logo 2 for this law on this device or the packaging indicates that this product may not be disposed of in the household waste system You are responsible for ensuring that all electronic and electrical waste is disposed of via the appropriate facilities oe recy cling depots Separate collection and correct processing of your electronic and electrical waste helps to conserve our natural resources Furthermore the correct disposal of elec tronic and electrical waste protects you and your environment For more information about the disposal of electronic and electrical waste please contact local authorities such as the ciy council the waste disposal services the shop in which you purchased the device or the manufacturer of the device 23 SYSTEMS Copyright 2007 4G Systems GmbH All rights reserved worldwide Doc Number 4601 000011 02 This document and the related software are property of 4G Systems GmbH or its suppliers and pro tected by copyright and other laws They are distributed under licenses restricting their use copying distribution and decompilation Neither receipt nor possession of this document confers or transfers any right to reproduce or disclose any part of the contents hereof No part of this document may be reproduced in any form by any means wit
3. CF device switched off when your XSJackT2 is switched off XSJack T2 Allnumbers are permitted when entering the desired number to activate call for warding Note Should CF immediate be activated on your connection then you will hear a special dial tone The versions CF 20 CF busy and CF device switched off can be activated simultaneously each to a different number CF immediate has priority over the other three versions and cannot be over written by one of the other three versions In order to switch on another CF after activating CF immediate first deactivate CF immediate and then switch on the new CF Call Forward Type Activating Deactivating CF immediate BAUR desired number HIE CF 20 Wk desired number ea a za CF busy xek desired number 4 AGE CF device switched off kb desired number H HMA Deactivate all CFs be 17 User Manual 18 Service Call waiting call hold These functions enable you to remain reachable for others even during phone calls Reject call waiting Flash Hook amp press 0 Finish original connection Put receiver down wait for ringing pick up receiver Hold call accept 2nd call Flash Hook amp press Call hold Flash Hook amp press Put on hold connect 2nd call Flash Hook wait for dial tone dial number Finish active connection Flash Hook amp press Note Your telephone needs to have
4. XSJackT2 User Manual Version 1 1 User Manual XSJack T2 Welcome Thank you for choosing our product XSJackT2 The compact XSJackT2 is suitable for permanent wall mounting or can be placed on a flat surface This manual will help you to easily understand the possibilities and functions that XSJackT2 has to offer Scope of delivery Your XSJack T2 package contains EB 1 XSJackT2 with 2 RJ 11 connectors EB 1 power supply with connection cable to connect to the mains supply BE 2 GSM antennas EB 1 user manual User Manual Guidelines for Safe and Efficient Use These instructions are intended for your safety If the product has been subject to any of these conditions or if you have any doubt make sure you have the product checked by a certified service person before charging or using it Failure to do so may result in product malfunction or a potential hazard to your health Please observe the following instructions when handling and using XSJackT2 to prevent damage to yourself and to the device BE XSJackT2 is a device which is designed for use only in heated and dry places It may not be exposed to either fire or flames and may not be used in areas with a potentially explosive atmosphere M The device may not be mounted or set up in a place which is exposed to direct sunlight or direct heat impact The slits and vents serve to ventilate the device These vents should not be covered The device must not come in
5. a Flash hook button and it must be activated by your network operator in order to use these services XSJack T2 Service Voicemail Voicemail is set up so that a call will divert to voicemail after ringing for 20 sec onds If you are already on a call and receive a second call you have 20 seconds to react to a call waiting before the caller is diverted to voicemail Once you have put the receiver down and should the caller still be on the line then a ringing sound is heard to remind you of an active call waiting You will know that a message has been received when the power LED flashes green The dial tone changes also when a message is waiting to 2 tones If you use your own answer machine set your answer machine to go to voice mail in less than 20 seconds approx 6 rings and contact your service provider to decommission the voicemail via the network To call voicemail just call 707 and follow the voice prompts 19 User Manual Appendix Technical Data Frequency band Security GSM Modem Antenna Connections Operating environment Box Energy requirements Standards supported GSM Dualband 900 1800 MHz GSM Compatible GSM phase 2 2 Automatic self diagnosis poate cog Factory Default Fallback for hardware and software reset Triple Rate Code for HR FR EFR Echo Cancellation Noise Reduction Processor AMR Narrow band Codes GSM SIM Slot RJ 11 Jacks for DTMF analogue telephone SMA jack for ante
6. all 9 digits including the area codes even for a local call e g 00 WA WI and MBI Once a telephone number is entered the connection is made automatically after a 4 second pause This is due to technical reasons and could take some getting used to Note The telephone which is to be connected to the XSJackT2 must support dual tone multi frequency DTMF Emergency calls You can make emergency calls at all times even when the SIM card is barred When making a call Please add in the area code at all times even when making a local call Local call Dial area code e g DI WA 0M6 OM and WMA National call Dial area code e g OB WA WE IM and WA 15 User Manual 16 Caller Identification caller ID Incoming calls You can see the telephone number of the caller on the display of your telephone with the call number indicator and providing the telephone is equipped appropri ately CLIP capable and display The precondition for this is that the caller has not suppressed his ID Service Call forwarding CF Call Customer Care to get call forwarding set up It is an option available to you and is a chargeable service Standard GSM call forwarding services can be set up on your device All in coming calls can be automatically forwarded to a connection of your choice You have the following options CF immediate immediately CF 20 after 20 seconds CF busy should the line be busy
7. hout prior written authorization of 4G Systems GmbH Moreover the regulations of the software license agreement apply to this documentation All brand names and trademarks mentioned are the property of their respective owners http www 4g systems com
8. lls Separation Distance Table of Contents Introduction Operating elements and status indicator Reset to default settings First Steps Step 1 Insert the SIM card Step 2 Connect the external antenna Step 3 Connecting electricity Step 4 Connecting telephone NN Oo Oo Oo PR WLW co XSJack T2 User Manual Telephoning Emergency calls When making a call Caller Identification caller ID Service Call forwarding CF Service Call waiting call hold Service Voicemail Appendix Technical Data Measurements for wall mounting FAQ Declaration of conformity Disposal information XSJack T2 Introduction Operating elements and status indicator When XSJackT2 is switched on the LEDs indicate the status of different functions 1 Power LED LED lights up green The device is supplied with electricity LED is off The device is not supplied with electricity LED flashes green A new voicemail message has been i slowly received aoe LED flashes green Please enter PUK code rapidly contact customer services 2 Status LED LED lights up red The device has successfully logged into the mobile network and a voice connection has been made LED flashes red Request to input PIN contact customer services 11 User Manual 3 LED bar display The bar display shows the GSM signal strength 3 LEDs light up green The strength of the GSM signal strength is excellent 2 LED
9. nna Working temperature 0 to 40 C Humidity 10 to 70 Housing measurements W x D x H 80 x 30 x 90 mm Weight 200 g Operating voltage 220 230 V 50 Hz Maximum power consumption 6 W Average power consumption 4 5 W European CE GCF Type Approval NZ approval XSJack T2 Measurements for wall mounting Proportions are not true to scale 21 User Manual 22 FAQ LEDs do not light up Check power supply between mains socket and XSJackT2 Your telephone does not have Use a different telephone or you will have to do an Flash hook key without the functions which need an Flash hook key Status LED flashes red Call customer service Power LED flashes green rapidly Call customer service Power LED flashes green slowly You have a new Voicemail Message waiting No dial tone Check the telephone connection to your XSJackT2 check the status of XSJackT2 Dial tone is interrupted with You have a new voicemail message waiting background beep Strange dial tone can be heard Call forward CF is activated Can make emergency calls Yes you can dial 111 even if barred when the connection is barred XSJack T2 Declaration of conformity 4G Systems GmbH declares herewith that XSJackT2 fulfils the basic requirements in accordance with EN 301 511 R amp TTE Regulatory Radio Testing EN 301 489 1 EN 301 489 7 ue testing EN 60950 parey Testing and other relevant provisions of the Directive 1999
10. ransmitting equipment including wireless phones may interfere with the functionality of inadequately protected medical devices Con sult a physician or the manufacturer of the medical device to ensure that they are adequately shielded from external RF Energy or if you have any questions Hearing Aids Some digital wireless devices may interfere with some hearing aids If interfer ence occurs please contact your hearing aid provider or physician Implanted Medical Devices Manufacturers of medical devices recommend a minimum separation of 15 cen timetres should be maintained between a wireless device and an implanted medical device such as a pacemaker or implanted defibrillator to avoid potential interference with the medical device If you have any questions about using your wireless device with an implanted medical device please consult your physician or health care provider XSJack T2 Emergency Calls Wireless devices operate using radio signals and wireless networks Connec tions in all conditions cannot be guaranteed You should not rely on any wireless device for essential communications such as medical emergencies Give your location Separation Distance This device should be operated with separation distance of 20 cm from the body at all times User Manual Table of Contents Welcome Scope of delivery Guidelines for Safe and Efficient Use Medical Equipment Hearing Aids Implanted Medical Devices Emergency Ca
11. s light up green The strength of the GSM signal strength is good 1 LEDs lights up green The strength of the GSM signal strength is marginal No LED lights up You have no coverage or the device is not switched on Reset to default settings You can reset XSJackT2 to the default setting All changes made by you will be reset To do this you will need a pointed object e g a paperclip 1 Insert the pointed object carefully into the small hole underneath the SIM card slot where the reset button is 2 Briefly press the reset button with the pointed object 12 XSJack T2 First Steps The XSJackT2 should be placed in a suitable place which fulfils the following criteria E Ensure reception is good using the signal indicator E The place must be dry and free of dirt with no exposure to direct sunlight E Ensure sufficient distance to potential interference sources such as microwaves or electrical devices with metal housing E You can mount the XSJackT2 on the wall A drill template can be found at the end of this manual see also Measurements for wall mounting on page 21 E If you need a stronger signal replace antenna with the additional extended antenna provided Step 1 Insert the SIM card The SIM card should be inserted into the SIM card slot on the side of the device until it locks into place Ensure that the power is not connected when you insert or remove the SIM card Point
12. to contact with liquids as this could lead to electric shocks short circuits or amongst other things destruction of the device E Do not open the housing of XSJackT2 This could lead to damage for the user and for the device MB Do not switch on where wireless phone use is prohibited or when it may cause interference or danger XSJack T2 Dispose of XSJackT2 according to legal regulations Current disposal guidelines for electrical devices are available at every recycling centre see also Disposal information on page 23 All wireless devices may be susceptible to interference which could affect performance Do not operate the device in the vicinity of medical equipment to avoid interference Use sensibly Use only as explained in the product manual Do not touch the antenna unnecessarily Only qualified personnel may repair this equipment Use only approved enhancements and batteries Do not connect incom patible products The device is not water resistant Do not paint Before cleaning or maintaining the device turn off and disconnect from power as you may be susceptible to electric shock or short circuiting the device Do not use chemical detergent powder or chemical agent Do not place magnetic storage media such as magnetic cards and floppy disks near the device Information stored on them may be erased Keep the device and charger out of reach of children User Manual Medical Equipment Operation of any radio t
Download Pdf Manuals
Related Search