Instructions ( file) - PAINTBALL ASG DESIGN MASKS
Contents
1. If the neck is not completely covered additionally wear e g a scarf Remember goggles only are not a sufficient protection 4 Before each game check the condition of the mask lens and a strap mounting to the mask tightening of the screws or for any scratches or cracks Note If the lens seating comes loose tighten it If you have been hit directly in the lens at a distance less than 10 feet even if you do not see any damage or if scratches cracks appear onthem replace them with new ones 5 FEO masks are equipped with an anti fog lenses system Nevertheless we do not know how long the mask will be used in one game what current weather conditions there will be or how your body will react during its use As aresult of physical exercises human body warms up and also a face gives out moisture sweat what in spite of all can lead to moisture or fog on the lens Note If the mask gets wet or fogged never take it off or clean it while playing on the paintball field Without the mask you are not protected 6 The mounting face strap gives no protection to the back of the head and ears from hits of balls or any other 7 The shell mask is made of resin reinforced with glass fiber but still before and after each game check the condition If you see any cracks or other damage discontinue its use 8 Keep the mask and lens away from heat sources or areas with high temperatures They can damage the structure of the mask and lenses and this may elim2. in any descriptive way It should be noted that the inner side is taped with soft anti fog film lens which gives more matte appearance Therefore the outer side if it is not covered with a decoration foil such as sunscreen or mirror has the structure of aclean shiny Plexiglas Lens inner side with soft anti fog film Lens outer side b Once outer side has been identified right and left lens should be adjusted accordingly to the shape of the holes in the mask the screw holes in the lens must coincide perfectly with the holes in the rear flange of the lens in the eye sockets of the mask c After fixing the lens they must be mounted with supplied screws and nuts with a 1 5 mm Allen wrench not included in kit Before each game check the quality of tightening They have to be tightened up so that during the movement and vibration of the mask nuts will not fall off and cause an eye injury f 2 Adjusting the elements of the internal padding The interior of the mask has been equipped with moving parts that can be fastened with Velcro Adjust the position so that the mask fits comfortably your head forehead Attach them carefully with Velcro that are sewn on the foam to the velour tape inside the mask NOTE Adjust the alignment of the foam padding both vertically and horizontally so the position of the mask ensures complete freedom of movement of the head Remember The mask cannot slide down or mo
3. HANDLING AND MAINTENANCE OF A MASK AND PROTECTIVE LENS PHANTOM Dear Customer Thank you for choosing FEO product We make every effort to care about the technical visual details quality of our masks which means Your satisfaction feo phantom team The mask can be used for recreational paintball or ASG only while maintaining the following safety rules the proper way of using and maintenance Failure to follow them may result in serious even permanent injury of face and eyes including blindness In order to prevent accidental shots outside the game oneshould always protect additionally the barrel marker with a liner ora barrel bag BASIC SAFETY RULES 1 FEO masks are designed for recreational play where specially designed paint balls or ASG are shot from the marker Remember markers which are used in the game have to be checked by chronograph measurement Do not use FEO masks in the game where set markers speed is greater than 300 fps feet per second which is 90 meters per second Masks should not be used with other balls that are not designed for paintball or ASG Pay attention so this rule is always respected by all the players on the field 2 Never remove the mask on the battle field in the nearby places during games or when other players markers are stillin use even if you already do not play Remember astray bullet also can hit and injure you 3 Always wear a mask that protects the eyes and the entire face and neck area
4. en them 3 Always replace the lens if you have been hit directly at a distance not less than 10 ft 3 m even if you do not see any damage 4 Lenses or foil covering have not been tested for various chemical reactions to anti fog agents such as lotions or sprays Note Do not use other chemicals because it can lead to damage of the original coating as a result of e g adverse chemical reaction 5 Do not store the lens or mask around chemicals or their fumes Most of them cause damage to the lenses and protective films Always store the mask with the lens ina dry cool place 6 Always wash your lenses with tap water and nothing else Chemical agents may lead to the damage of the internal structure of plastic from which they were produced If the lenses have been in contact with chemicals discard them and replace with a new model compatible with your mask 7 Clean your lens separately from the mask to remove excess paint from balls thoroughly Never leave your mask and lenses soiled with paint for along time It can damage the protective their properties of lenses 8 Before re assembling the mask with the lens dry each part accurately 9 Before and after every game mask and especially lens must be cleaned to ensure maximum visibility In order to clean it use a soft microfiber cloth a cotton cloth attested or specially intended for cleaning eyeglass lenses cloth Remember a use of hard cloth paper towels newspapers etc or cleaning c
5. hemicals may damage the coating or scratch the lens As a result protective properties of the lens might be lost Gently wipe but do not polish the lenses 10 Before each game check the condition of the screws that mount the lens to the mask Although the metal coating is protected remember that long term use and frequent exposure to water can lead to corrosion and improper holding of lenses USER S MANUAL AND MAINTENANCE OF FEO MASKS FEO masks are made of high quality resin reinforced with glass fiber or aramid Kevlar which provides solid face protection against the ball that flies at the speed less than 90 m sec 1 Before and after each game check the condition of shell masks protective paddings and straps that mount the mask to one s face Remember if any tears or cracks appear immediately replace them with new ones 2 Always wash your shell masks by hands separately from the other parts with running water and nothing else Chemical agents may lead to a damage of the internal structure of plastics from which it was produced If the mask has had contact with chemicals or fumes discard it and replace with a new one 3 Masks are painted with non toxic acrylic water based paint in addition protected with colorless varnish To dry the mask or wipe it use a soft microfiber cloth or cotton Do not polish the mask with hard materials paper or paper towels This may damage the outer layer of varnish 4 Polyurethane foam in the strap wh
6. ich mounts the mask to face and interior padding is lined with 100 cotton depending on the model of the mask This prevents from possible facial abrasions which could appear as a result of prolonged direct contact with the foam Washing of all the elements is recommended after each game to prevent the damage of cushioning materials from drying paint balls and for hygiene reasons Hand wash only 5 In order to ensure maximum comfort and fit of the mask to the individual shape of one s face FEO masks feature inner moving parts of paddings They can be fixed individually with Velcro so it feels comfortably The plush velcro partin the shell allows the use of a mask without paddings e g in combination with a balaclava 6 Always before the game make sure that the internal padding is fastened well to the shell mask Note that front padding left loose or too low fixing may limit the view which significantly affects the safety of the game NOTE Before using the mask with protective lenses read carefully the user s manual If you have any doubts or questions how to use it and maintain contact us This product is intended for persons over 18 years of age Minors play paintball and use masks only with the consent and under the supervision of adults USER S MANUAL OF ASSEMBLY AND PUTTING ON THE MASK 1 Assembly and disassembly of the lenses a In order not to interfere with the field of vision the inner and outer lenses are not marked
7. inate their protective properties Do not leave them in a hot car for example exposed directly to sunlight etc 9 Do not modify FEO masks on your own Note If you use a mask for purposes other than their intended use as described in this manual you expose yourself to the risk of facial lacerations 10 To ensure full protection of your face always use FEO original spare parts and accessories only designed to your mask model especially lenses 11 Always check masks and lenses borrowed from a third party or commercial paintball fields If you notice any scratches or damage return them toa rental and ask for another one USER S MANUAL AND MAINTENANCE OF FEOLENSES Lenses are made depending on the model of a steel mesh or polycarbonate with high impact resistance the most durable optical material ever known which provides light transmittance up to 90 Regardless as a result of improper maintenance and use their protective and visual properties may worsen and eventually disappear Only proper handling can provide protection of eyes frominjury that may occur during recreational game of paintball Carefully read and follow below instructions 1 Regardless of their visible condition the lens should be replaced with new ones at least once a year 2 Be careful Always before the game check your lenses If you notice any scratches cracks or damage replace them with new ones If the screws that hold the lens to mask have come loose tight
8. ve on the face during the game he mask can also be used without the accompanying interior padding or with a balaclava However that the felt impact force may be greater 3 Putting on the mask FEO mask design requires no fixing it by uncomfortable pressure goggles to face with rubber strips at the back of the head FEO solution is to apply the anatomical shape of the head and move the center of gravity to the top of the mask the front part of the mask Fig 1 A Foam padded strap is fitted with adjustable Velcro buckle on both sides of the face The strap only helps to maintain the masks at the occiput Fig 1 B This fixing system gives comfort to your face and asense of lightness a Loosen the Velcro strap on both sides and put a mask on your head b Grasp both ends of the strap together and tighten the belt and fasten with Velcro on both sides evenly c If you have long hair and wear a ponytail put it above the strap d Before the game make sure that the mask does not fall or move on the face in case of rapid head movement www feophantom com
Download Pdf Manuals
Related Search