PAR64 10MM UV LED PAR user manual
Contents
1. Operation 7 4 Functions in Z channel DMX mode Channel Value Function 1 0 255 Dimmer 0 to 100 2 0 255 Strobe effect 0 to 100 PAR64 10MM UV th mann MUSIC IS OUR PASSION 27 Technical specifications 8 Technical specifications Illuminant Number of DMX channels Operating voltage supply Power consumption Dimensions W x D x H Weight th mann MUSIC IS OUR PASSION 28 168 x 10 mm LEDs UV 400 410 nm 2 AC 230 V 50 Hz 35W 275 mm x 325 mm x 275 mm 2 1 kg LED PAR Troubleshooting 9 Troubleshooting NOTICE Possible data transmission errors For error free operation make use of dedicated DMX cables and do not use ordi nary microphone cables Never connect the DMX output to audio devices such as mixers or amplifiers In the following we list a few common problems that may occur during operation We give you some suggestions for easy troubleshooting PAR64 10MM UV th mann MUSIC IS OUR PASSION 29 Troubleshooting Symptom Remedy The unit does not work no Check the mains connection and the fuse light No response to the DMX con 1 Check the DMX ports and cables for proper connection troller 2 Check the address settings and the DMX polarity 3 Try using another DMX controller 4 Check to see if the DMX cables run near or alongside to high voltage cables that may cause damage or interfer ence to DMX interface circuits If the procedures recomme2. 4 Installation th mann MUSIC IS OUR PASSION Unpack and check carefully there is no transportation damage before using the unit Keep the equipment packaging To fullv protect the device against vibration dust and moisture during transportation or storage use the original packaging or vour own packaging material suitable for transport or storage respectivelv You can install the device on the wall ceiling or floor A mounting bracket is included in the package WARNINGI Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country Always secure the device with a secondary safety attachment such as a safety cable or a safety chain LED PAR 12 Installation NOTICEI Use of stands When mounting the device onto a stand ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacitv of the stand NOTICEI Possible data transmission errors For error free operation make use of dedicated DMX cables and do not use ordi narv microphone cables Never connect the DMX output to audio devices such as mixers or amplifiers DMX connections The unit offers a 3 pin XLR socket for DMX output and a 3 pin XLR plug for DMX input Please refer to the drawing and table below for pin assignment PAR64 10MM UV th mann MUSIC IS OUR PASSION 13 Installation 1 Ground
3. S TFA1AIA17VILL PAR64 10MM UV LED PAR th mann user manual MUSIC IS OUR PASSION Musikhaus Thomann e K Treppendorf 30 96138 Burgebrach Germany Telephone 49 0 9546 9223 0 E mail info thomann de Internet www thomann de 03 12 2012 Table of contents na vu RA WN 10 Table of contents Generalinotes i Liolade aiar 4 Safety instructions isnernrsrrniniseeeeeesseesserrsseersseerssersssessseessssressesesseeesseeesereesserssseesssernsee 7 Features ARR Eee Ener 11 Installation aaa Starting UP seesensenazznnzznaznnnzznnzaneznzznznszzaz Connections and operating elements OperatioN s csrcrrirrensenzenecee 7 1 Starting up the device 22 Mal MEN U iii aaa aio 7 3 Menu overview 7 4 Functions in 2 channel DMX mode Technical specifications cecccessssssssssssssssssecscssssssessscsssessesssscsscsssessucssscsnecsscsssessssnecsseesseesseeses 28 Troubleshooting sangen einen ernennen 29 Protecting the environment usnnneeneensssenssennsennssennssnnssnensennnssunssnnnssnnssnnssennsssnnssnnnn 31 PAR64 10MM UV th mann MUSIC IS OUR PASSION General notes 1 General notes th mann MUSIC IS OUR PASSION This user manual contains important information on safe operation of the device Read and follow all safetv notes and all instructions Save this manual for future reference Make sure that it is a
4. en the display shows the desired value press OK to confirm the selection Then press M to return to the higher menu level To return to the higher menu level without changes press M Make sure that this number matches the configuration of your DMX controller The highest possible start address for the 2 channel DMX mode is 511 Press M Press one of the arrow keys repeatedly until the display shows TEST Press OK This operating mode can be used to test the strobe effect speed STRO and the dimmer set ting DIMM to change both settings and to operate the device in stand alone mode LED PAR 22 Operation Operating mode Show Master Press the M button Press one of the arrow keys repeatedly until the display shows LINE Press OK Press one of the arrow keys repeatedly until the display shows MA Press OK Now you can select one of the 4 preprogrammed automatic shows Use the arrow keys to select a value between 1 and 4 the display shows P 01 P 04 The automatic show can only be activated on the device that operates as Master This setting is only relevant if the device is not controlled via DMX The device can operate in stand alone mode or control connected devices of the same type that have to be configured as Slaves When the display shows the desired value press OK to confirm the selection Then press M to return to the higher menu level To return to t
5. he higher menu level without changes press M Operating mode Slave Press M Press one of the arrow keys repeatedly until the display shows LINE Press OK Press one of the arrow keys repeatedly until the display shows SL Press OK Now you can assign a number to the device by which it is addressed as slave by the master Use the arrow keys to select a value between 1 and 512 the display shows A007 A512 This setting is only relevant if the device is operated as slave by a master but is not controlled via DMX When the display shows the desired value press OK to confirm the selection Then press M to return to the higher menu level To return to the higher menu level without changes press M PAR64 10MM UV th mann MUSIC IS OUR PASSION 23 Operation Programme speed Strobe effect speed th mann MUSIC IS OUR PASSION Press M Press one of the arrow keys repeatedly until the display shows SET Press OK Press one of the arrow keys repeatedly until the display shows SPEER Press OK Now you can set the programme speed for the preprogrammed automatic shows Use the arrow keys to select a value between 1 and 255 the display shows 7001 T255 This setting is only relevant if the device is not controlled via DMX When the display shows the desired value press OK to confirm the selection Then press M to return to the higher menu level To return to the higher menu le
6. nded above do not succeed please contact our Service Center You can find the contact information at www thomann de th mann LED PAR MUSIC IS OUR PASSION 30 Protecting the environment 10 Protecting the environment Disposal of the packaging mate rial For the transport and protective packaging environmentally friendly materials have been chosen that can be supplied to normal recycling Ensure that plastic bags packaging etc are properly disposed of Do not just dispose of these materials with your normal household waste but make sure that they are collected for recycling Please follow the notes and markings on the packaging Disposal of your old device This device is subject to the European directive 2002 96 EC Do not dispose of the device with your normal household waste Dispose of this device through an approved waste disposal firm or through your local waste facility When discarding the device comply with the rules and regulations that apply in your country If in doubt consult your local waste disposal facility PAR64 10MM UV th mann MUSIC IS OUR PASSION 31 Notes th mann LED PAR MUSIC IS OUR PASSION 32 Notes PAR64 10MM UV th mann MUSIC IS OUR PASSION 33 Notes th mann LED PAR MUSIC IS OUR PASSION 34 Musikhaus Thomann e K Treppendorf 30 96138 Burgebrach Germany www thomann de
7. ptic shock Strobe lighting can trigger seizures in photosensitive epilepsv Sensitive persons should avoid looking at strobe lights NOTICEI Risk of fire Do not cover the device nor anv ventilation slots Do not place the device near any direct heat source Keep the device away from naked flames NOTICE Operating conditions This device has been designed for indoor use only To prevent damage never expose the device to any liquid or moisture Avoid direct sunlight heavy dirt and strong vibrations PAR64 10MM UV th mann MUSIC IS OUR PASSION Safetv instructions themann MUSIC IS OUR PASSION NOTICE Power supply Before connecting the device ensure that the input voltage AC outlet matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker Failure to do so could result in damage to the device and possibly injure the user Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or fire LED PAR 10 3 Features Special features of this device 168 x UV LEDs Operation in stand alone master slave or DMX mode Verv simple operation via buttons and displav on the unit Robust metal housing with detachable grille Ideal for clubs bars stages exhibitions and manv more applications PAR64 10MM UV Features themann MUSIC IS OUR PASSION 11 Installation
8. s a selected value 4 buttons Increases decreases the displayed value by one Power chord M button Activates the main menu or a submenu Bracket for hanging or setting up PAR64 10MM UV Connections and operating elements th mann MUSIC IS OUR PASSION 19 Connections and operating elements 9 DMXIN DMX input 10 DMXOUT DMX output th mann LED PAR MUSIC IS OUR PASSION 20 Operation 7 Operation 7 1 Starting up the device Connect the unit to the power grid to start operation The device is immediatelv readv to use and operates in the last active mode with the last selected settings 7 2 Mainmenu Menu operation Press M to open the main menu Use the arrow keys to select the desired parameter or to change the respectively indicated value When the display shows the desired parameter or value press OK to enter the respective submenu or to confirm a new value To return to the previous menu level without changes press M for menu structure see Chapter 7 Opera tion on page 21 PAR64 10MM UV th mann MUSIC IS OUR PASSION 21 Operation DMX address Manual test th mann MUSIC IS OUR PASSION Press M Press one of the arrow keys repeatedly until the display DMX Press OK Now you can set the number of the first DMX channel to be used by the device DMX address Use the arrow keys to select a value between 1 and 512 the display shows A001 A512 Wh
9. s is considered to be improper and may result in personal injury or property damage No liability will be assumed for damages resulting from improper use This device may be used only by persons with sufficient physical sensorial and intellectual abilities and having corresponding knowledge and experience Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety DANGER Danger for children Ensure that plastic bags packaging etc are disposed of properly and are not within reach of babies and young children Choking hazard Ensure that children do not detach any small parts e g knobs or the like from the unit They could swallow the pieces and choke Never let children unattended use electrical devices PAR64 10MM UV th mann MUSIC IS OUR PASSION Safetv instructions DANGERI Electric shock caused by short circuit Do not modify the mains cable or the plug Failure to do so could result in electric shock death or fire If in doubt seek advice from a registered electrician DANGER Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present Never remove any covers There are no user serviceable parts inside WARNING Eye damage caused by high light intensity Never look directly into the light source th mann LED PAR MUSIC IS OUR PASSION Safetv instructions WARNINGI Risk of epile
10. shielding 2 DMX data 3 DMX data th mann LED PAR MUSIC IS OUR PASSION 14 Starting up 5 Starting up Establish all connections as long as the unit is switched off Use the shortest possible high qualitv cables for all connections PAR64 10MM UV th mann MUSIC IS OUR PASSION 15 Starting up Connections in DMX mode Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device Connect the output of the first DMX device to the input of the second one and soon to form a daisv chain Alwavs ensure that the output of the last DMX device in the daisv chain is terminated with a resistor 110 0 W 2 000 n th mann LED PAR MUSIC IS OUR PASSION 16 Starting up Connections in master slave When vou configure a group of devices in master slave mode the first unit will control the mode other units for an automatic sound activated synchronized show This function is ideal when you want to start a show immediately Connect the DMX output of the master device to the DMX input of the first slave device Then connect the DMX output of the first slave device to the DMX input of the second slave device and so on PAR64 10MM UV th mann MUSIC IS OUR PASSION 17 Connections and operating elements 6 Connections and operating elements Rear panel th mann LED PAR MUSIC IS OUR PASSION 18 Locking screw for the bracket Displav OK button Confirm
11. vailable to all persons using this device If you sell the device to other users be sure that thev also receive this manual Our products are subject to a process of continuous development We therefore reserve the right to make changes without notice LED PAR General notes Svmbols and signal words This section provides an overview of the svmbols and signal words used in this user manual Signal word DANGERI WARNINGI NOTICE Warning signs A PAR64 10MM UV Meaning This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided This combination of symbol and signal word indicates a possible dangerous situation that can result in death or serious injury if it is not avoided This combination of symbol and signal word indicates a possible dangerous situation that can result in material and environmental damage if it is not avoided Type of danger Warning high voltage themann MUSIC IS OUR PASSION General notes Warning signs Tvpeof danger Warning suspended load N Warning danger zone th mann LED PAR MUSIC IS OUR PASSION Safetv instructions 2 Safety instructions Intended use Safety This device is intended to be used as an electronic illumination effect using LED technics Use the device only as described in this user manual Any other use or use under other operating condition
12. vel without changes press M Press M Press one of the arrow keys repeatedly until the display shows SET Press OK Press one of the arrow keys repeatedly until the display shows STRO Press OK Now you can set the strobe effect speed Use the arrow keys to select a value between 0 and 24 the display shows S 00 S 24 This setting is only relevant if the device is not controlled via DMX When the display shows the desired value press OK to confirm the selection Then press M to return to the higher menu level To return to the higher menu level without changes press M LED PAR 24 Dimmer setting Operation Press M Press one of the arrow keys repeatedly until the display shows SET Press OK Press one of the arrow keys repeatedly until the display shows DIMM Press OK Now you can adjust the dimmer Use the arrow keys to select a value between 0 and 255 the display shows D000 D255 This setting is only relevant if the device is not controlled via DMX When the display shows the desired value press OK to confirm the selection Then press M to return to the higher menu level To return to the higher menu level without changes press M PAR64 10MM UV th mann MUSIC IS OUR PASSION 25 Operation 7 3 Menu overview MEN Cm ss une a Com MA Ce ass Cr mass Cosmo Comm th mann LED PAR MUSIC IS OUR PASSION 26
Download Pdf Manuals
Related Search