ViSS WATCH
Contents
1. Free Storage 0 Storage Schedule D STATUS neptune WORKING Storage EE 4 Capacity 0 OMB 0MB DR400 Dt IDLE Actual Storage SDR410 TINA DEV 10011 Rewrite VDVR 0 0 XDR STD Active 29 User s Manual Record Storage Allocation The box on the left displays the DVRs registered on the ViSS program It displays them by Code IP Address and Name It also displays the status of each DVR Images monitored on the DVRs are recorded on ViSS Select a DVR from the list to allocate record storage folders that were added during Storage Setup and select the Storage tab Storage Schedule Storage D Capacity 0 OMB 0OMB Actual Storage 0 Rewrite Clear Image e Storage Adjust the number of storage folders to allocate by using the arrow buttons e Actual Storage Displays the number of storage folders available for the selected DVR e Capacity Displays the capacity in MB of available storage for the selected DVR e Rewrite Writes over the oldest images when the allocated storage is full Clear Image Deletes all images from the selected DVR by clicking the button e Apply Saves the changes by selecting Active and clicking the button e Refresh Updates the data by clicking the button NOTE When the number beside Actual Storage is less than the number in the Storage field you can increase the Actual Storage number by allocating more storage folders in Record Allo2. 5 Remote Site List Selects the remote site to connect to 6 Playback Plays back the video D Display Mode Selects the desired display mode Save Print Button Saves or prints the image s found in search 9 Search Mode Selects the search mode Time Lapse or Event Playback Screen Displays the recorded or backed up images on ViSS 39 User s Manual 5 2 ViSS SEARCH Functions Logout Clicking the Logout button logs out of the ViSS program WATCH Clicking the WATCH button switches to ViSS WATCH from ViSS SEARCH ADMIN E Clicking the ADMIN button switches to ViSS ADMIN from ViSS SEARCH NOTE ViSS ADMIN is available only to the watchers registered as ADMIN class NOTE When there are no mouse clicks for more than 10 minutes you will be automatically logged out of the ViSS program To log in again click any button on the screen and follow the login procedures Storage Selection 8 mseenen acor Select the area to search for image between RECORD storage and BACKUP storage DVR Connection 3 IHE ESSE SES Code XDR E Select the desired DVR from the list and double click to connect Display Mode Select the desired display mode single 2 2 3x3 4x4 or 32 HH BH BR Playback Fast Backward Play Stop Play Fast Forward Play Go to the First Image Go to the Previous Image Go to the Next Image Go to the Last Image 40 Vide
3. Chapter 4 ViSS WATCH 4 1 Overview ViSS WATCH the real time streaming program for remote DVR images allows Watchers to monitor remote DVRs registered on the ViSS program in real time It also displays event information when remote DVRs detect events The following is the Graphical User Interface GUI of ViSS WATCH E Yi Watch Microsoft Internet Explorer DISBPCAY MG DE EJ VDVR TEST A FAVORITE FOLDER KOREA PENINSULA 71W 8 OUR SCREEN EVENT DATE TIME IDR CAM2 ALARM IN 2006 01 04 1 36 00 IDR CAM1 ALARM IN 2006 01 04 1 36 00 IDR CAM3 MOTION 2006 01 04 1 35 56 IDR CAM2 ALARM IN 2006 01 04 1 35 50 NOTE Depending on system specifications of the remote DVR images may not be transmitted when the remote DVR is not recording D Logout Button Logs out of the ViSS program 2 SEARCH Button Switches to ViSS SEARCH 3 ADMIN Button Switches to ViSS ADMIN 0 Display Mode Selects the desired display mode 5 Connection Button Connects to the selected DVR 6 Favorite Button Sets up the Favorite settings Remote Site List Selects the remote site to connect to Image Adjust Button Adjusts brightness contrast saturation and hue of the monitored image 9 PTZ Control Button Controls pan tilt and zoom of a camera at the remote site Alarm Out Control Button Controls alarm out devices at the remote site 17 Event List Displays the event logs from the remote DVRs 2 Monitor S
4. Watchdog ViSS Watchdog on the server checks the system status based on the preset watchdog interval and reboots the system when an abnormal system operation is detected Select the ViSSControl config file in the ViSS folder if you want to change the ViSS Watchdog settings The default settings are as follows AUTO REBOOTING ENABLED 1 1 Enables watchdog 0 Disables watchdog VISS REBOOTING WAIT SECONDS 600 Watchdog system check interval NOTE Before changing the ViSS Watchdog settings first STOP the ViSS Daemon program ViSS Control NOTE You must restart the system to apply changes after changing ViSS Watchdog settings Port When the server uses a firewall with Microsoft Windows XP Service Pack 2 operating system or on network you should configure the ports as follows for network connections between the web browser and the server Watch 8016 Backup 8014 ViSS Control 8010 Recording Search 10020 Backup Search 10021 Storage Setup 8012 Applet 8050 Tomcat 8080 Virtual Memory If you connect to more than 256 DVRs increase the capacity of virtual memory to 3GB by adding the 3gb option in the boot ini file in the boot drive Refer to the following example boot loader timeout 30 default multi 0 disk 0 rdisk 0 partition 2 WINDOWS operating systems multi O disk O rdisk 0 partition 2 WINDOWS Microsoft Windows XP Professional fastdetect 3gb User s Manual 2 3 Operation ViSS Server Progra
5. amp z 5 8 4 5 The ee m http Welcome to the Apache Tomcat ES Apache Tomcat Setup Choose Components Setup Wizard This wizard will quide you through the installation of Apache Tomcat install Click Next to continue Choose which Features of Apache Tomcat you want to install Check the components you want to install and uncheck the components you don t want to It is recommended that you close all other applications Select the type of install wa before starting Setup This will make it possible to update relevant system Files without having to reboot your Or select the optional Md Tomcat computer Click Next to continue components you wish to install Space required 11 4MB Start Menu Items component to see its Documentation description C Examples C webapps User s Manual 10 When the following command prompt box appears after TOMCAT 1s installed configure the ViSS backup mode following the instruction ex C Program Files ViSSWvissbackupsetup exe viss backup mode setup viss backup mode lt normal 1 frame recovery viss backup mode lt 0 normal 1 frame recovery gt Enter 0 to back up recorded video in DVRs according to the user defined backup schedule Enter 1 to back up recorded video in DVRs automatically when ViSS fails to record because of an unexpected ViSS reboot or DVR disconnection NOTE Refer to 3 2 Fun
6. Video Format and Show Text In Selecting Save 2 Bitmap saves the current image in a bitmap file format and selecting Save gt ClipCopy saves any part of the video clip as another executable file Selecting Print lets you print the current image on the printer connected to your computer Selecting Info displays Channel Title Time Type Size and Resolution information about the image Selecting Image Processing allows you to control brightness blur and sharpen for play back images Selecting Video Format allows you to select alternate display environments that might operate better with graphics card installed in your PC Use the Video Format option when you are experiencing improper image display Selecting Show Text In displays video with text in data if the video has been recorded with text in data NOTE mage Processing works only in the single screen layout and also in the pause mode NOTE If you are not sure about the appropriate Video Format option try each option until the image displays properly Click the amp to select from Normal and Double screen views Clicking the left mouse button on an enlarged image and dragging moves its position Click the to display the image full screen NOTE If the VGA card or monitor for your PC does not support 640x480 video resolution Full Screen might not display properly when selected If this happens press the ESC key on your PC to return to the normal screen mode 45 User s Man
7. dvr 512 max watcher 512 premium version 1 4 0 build 07040406 WATCHER LOG STATUS SETUP BACKUP RECORD viss b START STOP HOCIDAY SERU STORAGE SETUR STORAGE SWITEH SETILU OVRNS a Total Capacity Available Storage Backup Allocated Record Allocated 39997 MB 0 OMB 7 4480 MB 25 16000 MB 29062 MB 2 1280 MB 13 8320 MB 15 9500 MB 117238 MB 134 85750 MB 0 MB 0 OMB 2380454 MB 286 183040 MB 3200 MB 5 3200 MB Total Storage 492 314 GB Storage in Backup 25C16000 MB Available Storage 422 270080 MB Storage in Record 45 28800 e DISK Selects the disk group to allocate storage DISK 0 Disk group 1 DISK 1 Disk group 2 Drive Displays the installed drives Total Capacity Displays the total capacity in MB Available Storage Displays the number of storage folders and capacity in MB of available storage e Backup Allocated Displays the number of storage folders and capacity in MB of storage allocated for backup e Record Allocated Displays the number of storage folders and capacity in MB of storage allocated for recording NOTE If disk drives are not allocated to a disk group during Disk Group setup you cannot allocate storage to the disk group Refer to the STORAGE SWITCH SETUP gt Disk Group section for details A color bar at the bottom shows the storage allocation status for the total of all drives 20 Video Streaming Server ViSS
8. 1 DISK G DISKGROUP END Disk group 1 ends DISKGROUP BEGIN Disk group 2 begins DISK J DISK K l DISK M Disk group 2 DISKGROUP_END Disk group 2 ends NOTE Do not allocate one disk drive to both disk groups Otherwise ViSS recording and backup might not work properly 22 Video Streaming Server ViSS Storage Switch Function A viss Admin Microsoft Internet Explorer Vivo ADMIN DEO STREAMING SERVER max dyr 512 max watcher 512 premium version 1 4 0 build 07040406 WATCHER STATUS SETUP BACKUP RECORD viss activaTeD gt START STOP HOLIDAY SERU STORAGE SETUP STORAGE SWITCH SETZURBI DVRNS SETLUEP Storage Switch USE C Yes No Switch Time o hour o Interval Days Current DiskType b USE Select whether or not the storage switch function is used e Switch Time Set the time to switch the storage disk group 0 to 24 hours 0 to 60 minutes e Interval Days Set the interval to switch the storage disk group Current Disk Type Displays the disk group currently used for storage You can change the storage disk group manually by entering 0 for Disk Group 1 and 1 for Disk Group 2 NOTE Set Current Disk Type as 0 Disk Group 1 when not using the storage switch function Clicking the button saves the changes NOTE When using the storage switch function disk drives should be allocated to each disk group during the Disk Group setup Otherwise ViSS recording
9. 10 942 Images Sec 0 000 Images Sec 0 000 Images Sec 11 273 Images Sec 0 000 Images Sec 0 000 Images Sec 0 000 Images Sec 0 000 Images Sec 0 000 Images Sec 0 000 Images Sec 0 000 Images Sec 0 000 Images Sec 0 000 Images Sec 0 000 Images Sec 0 000 Images Sec 0 000 Images Sec WATCHERS OF DVR Neptune WATCHER ID Manager CHANNEL 0 ca 98 658 KBytes Sec 50 244 KBytes Sec 0 000 KBytes Sec 0 000 KBytes Sec 48 414 KBytes Sec 0 000 KBytes Sec 0 000 KBytes Sec 0 000 KBytes Sec 0 000 KBytes Sec 0 000 KBytes Sec 0 000 KBytes Sec 0 000 KBytes Sec 0 000 KBytes Sec 0 000 KBytes Sec 0 000 KBytes Sec 0 000 KBytes Sec 0 000 KBytes Sec Select S545 tab to display the connection information of the DVRs and Watchers currently connected to the ViSS program DVR Displays the connection information of the DVRs currently connected to the ViSS program Select a DVR from the DVR list and click the button The detail information of the selected DVR will be displayed on the right of the screen DVR code camera name camera recording speed and transfer speed and the information of watchers connected to the DVR in ViSS WATCH Watcher Displays the connection information of the Watchers currently connected to the ViSS WATCH Select a Watcher from the Watcher list and click the button The detail information of the selected Watcher will be displayed on the right of the screen Watcher ID code of the connected DVR camera recordin
10. Storage Allocation DISK Selecting the disk group displays a list of disk drives allocated to the disk group 77799 MB 46 29440 MB EAD 76316 MB 41 26240 5 3200 MB 0 DMB 0 MB 0 MB Click the drive to allocate storage and buttons appear beside the Backup Allocated and Record Allocated fields Click the button and the following box appears Available 41 25240 Add Adjust the number of storage folders for backup and recording by using arrow buttons or entering a number Click the Ok button to save the changes Clicking the Cancel button closes the box without saving the changes NOTE It is recommended to allocate the same total number of storage folders to each disk group for efficient storage usage when using the storage switch function When allocating the record or backup storage folders for the DVR the same number of storage folders is automatically allocated to each disk group Refer to Chapter 3 ViSS ADMIN gt 3 2 ViSS ADMIN Functions gt BACKUP or RECORD for details Clicking the button resets all storage to 0 CAUTION If you initialize the storage by clicking the button all data saved in the storage will be deleted Update the data by clicking the button in case several ADMINSs are making changes to storage allocation at the same time Storage Deletion NOTE Before deleting storage first STOP the ViSS Daemon program ViSS Control Move to
11. and backup might not work properly 23 User s Manual DVRNS SETUP Select the Emri8i SETHE tab to set up DVRNS DVR Name Service RUSSES Po Microsoft Internet Explorer DEO STREAMING SERVER max dvr 512 max watcher 512 premium version 1 4 0 build 07040406 SETUP BACKUP RECORD viss acTivATED b START N STOP HOLIDAY SE yur STORAGE SETUP STORAGE amp WIELE El SETU DVRHS DVRIIS SERVER ADDRESS DVRNS SERVER PORT 10088 DVRNS SERVER ADDRESS Enter the IP address or name of the DVRNS server The default address is dvrnames net DVRNS SERVER PORT Enter the port number of the DVRNS server The default port number is 10088 Clicking the button saves the changes 24 Video Streaming Server ViSS BACKUP ViSS provides two backup modes Schedule Backup and Frame Recovery Backup When set to Schedule Backup ViSS backs up recorded video from the remote DVRs according to a user defined backup schedule When set to Frame Recovery Backup ViSS automatically recovers lost video by backing up recorded video from the remote DVRs when it fails to record because of an unexpected system reboot or DVR disconnection Backup Mode NOTE Before changing the Backup Mode settings made during the ViSS software installation first STOP the ViSS Daemon program ViSS Control Move to the viss config and vissbackup config file in the ViSS folder if you want to change the backup mode If the backup mode was not changed while
12. is saved in separate disk groups because of a storage disk group switch Select the date on the calendar and click the Go To button to search for images recorded at the specified time Ed Enter the date and time to search c 41 User s Manual Set the time to search for an image by adjusting the time by using arrow buttons or by typing the specific time Clicking the OK button plays back the image recorded at that time on the screen Event Mode 2 Click the event mode L3 button beside the time lapse mode 9 button to search for recorded or backed up images by event and then play back those images Click the QUERY 3 button and the Event Search window appears Search By Event Select the Event in the Search By field to search for image by events Event Search Soach From M First 6 12 21 19 50 12 To v Last a ff tay te I all bes abe 4 16 Alarm In lviviviviviviviv iv Motion lv iviviviviviviv iv Video Loss lv iviviviviviviv iv Video Blind lv jv v jv ijv iv iv iv Object Detection iv iv iv iv e From Selecting First searches from the first recorded data If you want a specific starting date and time delete the checkmark and enter the desired date and time To Selecting Last searches until the last recorded data If you want a specific ending date and time delete the checkmark and enter the desired date and time e Alarm In Motion Video Lo
13. occur Storage Schedule Sensor MotionDetecton Video Lass ObjectDetection weard Select Camera Selects a camera mec Camera Association Selects a camera number you 9e e s 9 would like associated with the camera that has an C9 C0 dp C 16 object detection event You can associate multiple e 9 9 8 v w e l 17 18C 19 C 20C 21 22 23 24 cameras with a camera oor 128 127 72872917900 791 752 Select Active and click the button to save the changes Camera Association E 8 ES SJ sg 20 f Tar 26 7 27 28 29 7 30 31 22 Active Video Blind Use to record images from selected cameras when video blind events are detected Storage Schedule Sensor MotionDetection Video Loss ObjectDetection videoBind g Select Camera Selects TER Camera Association Selects a camera number you CicaCacacscecs ca would like associated with the camera that has been C9 Ci0C 11 12C 13C 14 C 15C 16 blinded You can associate multiple cameras with amp amp 112 yoyoy a camera 25C 26 at 28 29 sof 31 32 Select Active and click the button to save the changes Camera Association LEN DENN EE 8 DM EM ESI ESSE SJ E 8 SENE Sg d Mes HU ES Active 33 User s Manual 34 Video Streaming Server ViSS
14. s Manual User RECORDING o S E z o VIDEO STREAMING SERVER Video Streaming Server ViSS Table of Contents Chapter 1 Overview saisies anina A EASTA EE iiaii 1 TE OVNEN E 1 12 PROGUCTANTONIMAION neisa a dos 1 Chapter 2 V 1S 0S OlW ANC oessa A 3 Zick USES AMO UN ends 3 2 2 deir E Eran Eat uuu etu 7 Pape games 6 lt 1 2111 6 ae re ocu ee 8 Chapter 3 VISS ADMIN usto exuta e tad aod de veda eto qu vette etu 11 OVENI EW ton used dendo dedo a ot etae 11 32 VISS ADMIN FUNCIONS oe cep EN 11 Chapter 4 VISS WATQGEI cc dee er cn eg e ee 35 Zo ne 35 4 2 NISS WATCH FUNCHONS 36 Chapter 5 VISS SEARG iiit dtes urit Ei eR odds b ibm E deii 39 od XOVOerIVIOW loue Idol ta i tete 39 5 2 VISS SEARCH T UrncellOriS roeier etta ra e eeepc E a uev ode petet eaa 40 User s Manual Video Streaming Server ViSS Chapter 1 Overview 1 1 Overview ViSS 15 a Video Streaming Server Many DVRs can be connected to the ViSS program at once and many watchers can simultaneously view images from DVRs registered on the ViSS program ViSS 1s an intelligent and advanced server technology to manage DVRs and watchers The ViSS software consists of the following programs ViSS se
15. the JAVA program je J2SE Development Kit 5 0 Update 7 License License Agreement Please read the following license agreement carefully Sun Microsystems Inc Binary Code License Agreement for the JAVA 2 PLATFORM STANDARD EDITION DEVELOPMENT KIT 5 0 SUN MICROSYSTEMS INC SUN IS WILLING TO LICENSE THE SOFTWARE IDENTIFIED BELOW TO YOU ONLY UPON THE CONDITION THAT YOU ACCEPT ALL OF THE TERMS CONTAINED IN THIS BINARY CODE LICENSE AGREEMENT AND SUPPLEMENTAL LICENSE TERMS COLLECTIVELY AGREEMENT PLEASE READ THE AGREEMENT CAREFULLY BY DOWNLOADING OR INSTALLING THIS SOFTWARE YOU ACCEPT THE TERMS OF THE AGREEMENT INDICATE ACCEPTANCE BY SELECTING THE ACCEPT BUTTON AT THE BOTTOM OF THE AGREEMENT IF YOU ARE NOT WILLING TO BE BOUND BY ALL THE TERMS SELECT THE DECLINE BUTTON AT THE BOTTOM OF THE AGREEMENT AND THE OI do not accept the terms in the license agreement You must restart your system For the configuration changes made to Java 2 SDK SE v1 4 2 04 to take effect Click Yes to restart now or No if you plan to restart later 9 When the following TOMCAT setup dialog box appears click the Next button Select the TOMCAT optional components as shown below and click Next Follow the instructions in the setup boxes to install TOMCAT NOTE You do not need to install the TOMCAT program if the TOMCAT 5 5 program has already been installed on the server ES Apache Tomcat Setup pache org jakarta a 8 iz
16. 019 8200 ADRYOO se STATIC 16 ADRprogoo 10 0 11 104 8016 10019 8200 ADRprogo0 STATIC 16 HDR GA 10 0 12 205 8016 10019 68200 HDR GA STATIC 15 IDR6116 10 0 0 61 8016 10019 8200 T B r r ADR900 10 0 11 104 8016 10019 8200 r r r IDR STATIC 32 0 Ld gt JUNO 10 0 11 111 8016 10019 68200 JUNO STATIC 32 0 secre RDI A searen Simoca Select a DVR to delete from the list and click the button to delete the selected DVR Clicking the button changes the DVR information CAUTION Clicking the am list on the current page button and the button deletes all DVRs from the 12 Video Streaming Server ViSS ADD Select the tab to register a DVR on the ViSS program http 10 0 11 100 8080 New Document Windows Internet Explorer DEO STREAMING SERVER max dvr 128 max watcher 16 4 DVR WATCHER LOG STATUS SETUP BACKUP RECORD viss gt START STOP OMR us FE CODE UNIQUE DVR CODE NAME IDENTIFICATION NAME ID DVR LOGIN ID PASSWORD DVR LOGIN PASSWORD PASSWORD confirm IP INTERNET IP ADDRESS WATCH PORT PORT NUMBER SEARCH PORT ADMIN PORT AUDIO PORT o 4 IS sl S I ad 481 gt 1121121121 lal le p NETWORK TYPE TYPE OF INTERNET CONNECTION ACTIVE lt USE OR USE THIS DVR AREA ID AREA INFORMATION OF THIS DVR MANAGEMENT CODE MANAGEMENT INFORM
17. 4 0 build 07041211 I WATCHER LOG STATUS SETUP BACKUP RECORD viss AcTIvATED gt START STOP Total Free Storage 0 EE IP NAME STATUS Storage Jo 4 Capacity 0 OMB OMB neptune 8 Actual Storage 0 14 13 DLE Rewrite Image FOIS First Image Time 2007 04 13 3 13 01 IV Non Stop Backup 1 1 1 1 1 1 XDR STD Once Day Week Month 2007 04 i3 m Summary Active Apply Backup Storage Allocation The box on the left displays the DVRs registered on the ViSS program It displays them by Code IP Address and Name It also displays the status of each DVR Images saved on the DVRs are backed up on ViSS Select a DVR from the list to allocate backup storage that was added during Storage Setup Storage 3 m Capacity 0 OMBIOMEB Actual Storage e Storage Adjust the number of storage folders to allocate by using the arrow buttons e Actual Storage Displays the number of storage folders available for the selected DVR e Capacity Displays the capacity in MB of available storage for the selected DVR Rewrite Writes over the oldest images when the allocated storage is full Clear Image Deletes all images from the selected DVR by clicking the button e Summary Uses summary backup function Apply Saves the changes by selecting Active and clicking the button Refresh Updates the data by clicking the button NOTE When selecting Summary V
18. 5 User s Manual AUTHORITY SETUP Select the tab to grant access authority to each Watcher for specific remote DVRs A visS Admin Microsoft Internet Explorer Vivo ADMIN VIDEO STREAMING SERVER max dvr 512 max watcher 512 premium version 1 4 0 build 07040406 WATCHER LOG STATUS SETUP BACKUP RECORD viss AcTIvATED P START STOP WATCHER LIST ADD Watcher List admin admin potomato Sophia DYR List Selected DVR List HDR QA 1086116 816 JUNO adr100plus QA Neptune ADRAUDDCset SDR410 set ADRSO0 XDR PRO ADRS U set XDR std ADRproS00 set XDRDLX1 QA hhhhhhhhhhhh5454545454 XDRDLX2 QA idr32 QA MINA QA SDR SDA400 TINA Select All NOTE When you do not grant the authority for a specific remote DVR to a Watcher that Watcher cannot watch and search for video on ALL the registered DVRs Watcher List Select the watcher to grant the authority DVR List Selected DVR List Select a DVR to grant the watcher authority in the DVR List and click the button to add the selected DVR to Selected DVR List The watcher can watch and search for video on the DVRs in the Selected DVR List Selecting a DVR in the Selected DVR List and clicking the button deletes the selected DVR Clicking the button adds all DVRs in DVR List to Selected DVR List and clicking the button deletes all DVRs from Selected DVR List Sel
19. ATION DVR MODEL DVR PRODUCT MODEL SPECIFICATION INSTALL DATE DATE WHEN THIS DVR WAS INSTALLED CAMERA NUMBER CAMERA CONNECTED TO THIS DVR ALARM IN NUMBER ALARM IN CONNECTED TO THIS DVR ALARM OUT NUMBER ALARM OUT CONNECTED TO THIS DVR Entering the DVR information and clicking the button complete the DVR registration NOTE The CODE ID PASSWORD IP WATCH PORT SEARCH PORT ADMIN PORT AUDIO PORT NETWORK TYPE ACTIVE and CAMERA NUMBER fields must be completed to register the DVR You cannot enter a code already registered in the ViSS program NOTE When using the DVRNS DVR Name Service function enter the DVR name registered on the DVRNS server in the P field and select DVRNS in the NETWORK TYPE field Click the SETUP H button on the ViSS ADMIN screen and enter the DVRNS server address and port number to complete the DVRNS settings NOTE When you select NOT USE in the ACTIVE field the DVR will be registered on the VISS program but will not be connected with the ViSS program 13 User s Manual WATCHER WATCHER LIST Select the 5 35E8 tab to delete a Watcher or edit Watcher information A ViSS Admin Microsoft Internet Explorer V iuJg ADMIN IDEO 3T EANVWNG SERVER max dvr 512 max watcher 512 premium version 1 4 0 build 07040406 STATUS SETUP BACKUP RECORD viss actiVATED b START N STOP WATCHER IISI ADD AUTHORITY SETUP Total 3 Watcher Found List 10 All per page MANAGE NAME AR
20. EA PHONE Department EDIT admin i admin Sophia potomato Management Marketing it Select a Watcher to delete from the list and click the button to delete the selected Watcher Clicking the button changes the Watcher information CAUTION Clicking the button and the button deletes all DVRs from the list on the current page 14 Video Streaming Server ViSS ADD Select the tab to register a Watcher to the ViSS program A viss Admin Microsoft Internet Explorer V iuJg ADMIN DEO STREAMING SERVER max dvr 512 max watcher 512 premium version 1 4 0 build 07040406 STATUS SETUP BACKUP RECORD viss AcTIvVaATED b START N STOP WATCHER LIST AUTHORiiYy SETH NAME VWATCHER S ID VWATCHER S UNIQUE ID PASSWORD WATCHER S PASSWORD PASSWORD confirm ACTIVE USE OR NOT USE THIS WATCHER CLASS GUEST WATCHER S LEVEL DEPARTMENT DEPARTMENT VHERE THIS WATCHER BELONGS TO MANAGING AREA AREA WHERE THIS WATCHER MANAGES PHONE NUMBER THIS WATCHER S PHONE NUMBER Entering the Watcher s information and clicking the button completes the Watcher registration NOTE The NAME ID PASSWORD ACTIVE and CLASS fields must be completed to add a Watcher NOTE When you select NOT USE in the ACTIVE field the Watcher will be registered on the ViSS program but will not be allowed to connect to the ViSS program 1
21. OSD option Display Camera Title On Screen Display Date Time and Display Image Transmission Status 36 Video Streaming Server ViSS Video Monitoring e DVR FOLDER Displays the registered DVR list and clicking the DVR displays the connected camera list Select the DVR or camera and drag it to the monitor em screen Video from the selected DVR or camera displays on the screen To display FAVORITE FOLDER a DVR or camera in a specific position on the screen hold the Ctrl key on the KOREA PENINSULA keyboard and click the DVR or camera and drag it to the desired location on the screen Selecting the camera and clicking left mouse button allows you to change the camera name is available only to the watchers registered as ADMIN class FAVORITE FOLDER Displays the saved FAVORITE list Click the desired Favorite selection and drag it to the monitor screen Video 1s arranged and displayed on the screen as it was set up for that Favorite selection Favorite Setup EJ Favorite is user defined camera display arrangement You can organize the monitor screen with video from desired cameras or DVRs and save the user defined arrangement as a Favorite Click the Favorite Setup button and the following menu box appears NOTE The Favorite Setup function is available only to the watchers registered as ADMIN class ae EE e Save Display Setting Saves the current camera display Save As arrangement as the current name
22. T START button to releases sleep mode on the ViSS server program STOP Click the STOP button to stop the ViSS program set up sleep mode on the ViSS server program WATCH 9 Click the WATCH button to switch to VISS WATCH to monitor images on DVRs registered on the ViSS program 11 User s Manual SEARCH Click the SEARCH button to switch to ViSS SEARCH to search for recorded or backed up images on the ViSS program LOGOUT Clicking the LOGOUT button logs out the ViSS program NOTE When there are no mouse clicks for more than 10 minutes you will be automatically logged out of the ViSS program To log in again click any button on the screen and follow the login procedures DVR DVR LIST Select the Ee NE tab to delete a DVR or edit the DVR information viss Admin Microsoft Internet Explorer 0977 ADMIN DEO STREAMING SERVER max dvr 512 max watcher 512 premium version 1 4 0 build 07040406 DVR WATCHER STATUS SETUP BACKUP RECORD viss activATED b START N STOP Total 24 DYR Found List 10 All per page WATCH SESRCH ADMIN AREA NETWORK ALARM ALARM TEXT AUDIO CODE IP PORT PORT PORT LOGIN IB USE NAME ID TYPE CAMERAS IN OUT IN IN EDIT 814 1 2 3 4 8016 10018 8200 814 STATIC 4 0 0 815 1 2 3 4 8016 10019 8200 815 STATIC 4 0 0 815 1 2 34 8016 10019 8200 816 STATIC 0 0 400 10 0 11 116 8016 10019 8200 ADR400 se STATIC 16 ADR900 STATIC 0 ADR300 se 10 0 11 108 8016 10
23. To Last 20054 209 10 20 49 fll al bab e TE ah Le Came MMMM VM VO VO i Progress 43 User s Manual Sets the time range to save in the From and To fields and select the camera number NOTE It is possible that video in the selected time range is saved separately in two groups because of a storage switch First search for video in the selected time range in the timetable to make certain whether or not you need to select the video segment Click the Start button and enter a file name Click the Save button to start saving a video clip copy and the Stop button to stop saving The Progress bar shows the saving progress NOTE Do not save files larger than 2GB You do not need to install any special software on your personal computer to view video clips The copied video clip contains the ClipPlayer program NOTE It is suggested that the computer used for the ClipPlayer program has at least a 800MHz Pentium Ill If your CPU is slower than this video clips recorded at maximum speed with very high image quality will be played back slowly Also DirectX 8 0 or higher must be installed and a VGA card with 16MB or more video RAM is recommended for proper operation H Aeh mg Gti The ClipPlayer Screen displays the clip images 44 Video Streaming Server ViSS NOTE Proper image display depends on the display settings of your PC If you are experiencing display prob
24. a ee ee e Save As Saves the current camera display arrangement using com oad Favorite from Server another Hates E ENT e Save Favorite to Server Saves the Favorite information on the server Cancel Load Favorite from Server Downloads the Favorite information from the ViSS program e Remove Deletes the selected Favorite e Cancel Closes the menu box Select the desired Favorite in FAVORITE FOLDER and drag it to the monitor screen Video displays as it was arranged in the Favorite settings Image Adjustment Contrast Saturation Brightness Hue Undo Clicking the Image Adjustment button allows you to adjust brightness contrast saturation and hue ofthe image Select a camera from the field at the bottom and adjust the image by clicking on the icons Clicking the Undo button cancels the image changes and reloads the original image settings 37 User s Manual PTZ Control 5 Move Buttons Iris Close Iris Open Set Preset Go to Preset Zoom Out Zoom In Focus Near Focus Far Clicking the PTZ Control button allows you to control pan tilt iris and zoom of a controllable camera and set presets Select a camera from the field at the bottom and make adjustments by clicking on the icons Alarm Out Control e z e Ngh wmv 2 2 2 Clicking Alarm Out Control J button allows you to activate or deactivate alarm out devices of
25. cated in the SETUP settings or by decreasing the number of registered DVRs in the DVR settings When a DVR is deleted storage folders in Actual Storage of the deleted DVR automatically move to Actual Storage of other DVRs NOTE When using the storage switch function ViSS automatically allocates the same number of record storage folders to each disk group when allocating record storage to the DVR For example when allocating three record storage folders for the selected DVR Disk group 1 has three storage folders and Disk group 2 also has three storage folders for the DVR CAUTION Clicking the button deletes all images from the selected DVR Make sure that you want to delete all images before clicking the button 30 Video Streaming Server ViSS Schedule Select the Schedule tab to set up the record schedule of the selected DVR Schedule Use to set recording schedules for selected cameras Storage Schedule Schedule Sensor MotionDetection Video Loss ObjectDetection VidecBlind ERU Select Camera 61582 64 65 66 67 68 10 11 12 1 6136146 15 16 o Rec Mode e Select Camera Selects a camera to set up a schedule e Rec Mode Selects the day and time block on the timetable and then selects the recording mode View Only Displays images from the selected camera but does not record Time Lapse T Records images from the selected camera based on the recording sch
26. cedures Go to Control Panel gt Taskbar and Start Menu gt Taskbar and select an Auto hide the taskbar option Go to Control Panel gt Internet Options gt Security gt Custom Level gt Miscellaneous and select an Allow websites to open windows without address or status bars option NOTE When running the ViSS client program in the Microsoft Windows Vista operating system it is recommended to start Internet Explorer with elevated administrator permissions Click the right mouse button on the Internet Explorer icon and select the Run as administrator option from the context menu Otherwise some functions of the ViSS client program might be limited Video Streaming Server ViSS NOTE There might be a problem with screen display or screen update due to low image transmission speed when using the Microsoft Windows Vista operating system In this situation it is recommended that you disable the Auto Tuning capability of your computer Run the Command Prompt with elevated administrator permissions Go to the Start Menu gt Accessories gt Command Prompt gt Click the right mouse button and select the Run as administrator option Then enter netsh int tcp set global autotuninglevel disable and hit the enter key Restart your computer to apply the changes If you want to enable the Auto Tuning capability again enter netsh int tcp set global autotuninglevel normal after running the Command Prompt with elevated admini
27. cking the arrow button in the date field displays a calendar Select the desired date by clicking on it July 2005 Sun Mon Tue Wed Thu 26 27 28 29 30 45 6 7 11 12 13 14 18 19 20 21 Clicking or button moves to the previous or next month NOTE When First Image Time is earlier than the time of the first image recorded on the DVR ViSS automatically backs up from the first image recorded on the DVR Selecting Non Stop Backup deactivates the Last Image Time and continuously backs up images Backup Schedule NOTE You cannot set up a backup schedule when ViSS is in the Frame Recovery Backup mode Once Set the specific date to back up Once Day Week Month 2005 01 01 27 User s Manual Clicking the arrow button in the date field displays a calendar Select the desired date by clicking on it NOTE When a date to back up is set to earlier than the date set in Start On in the Day tab see below ViSS will not back up images Set or cancel the backup time by clicking the left or right mouse button on the desired time in the timetable or by dragging to the desired time while holding the left or right mouse button NOTE ViSS will not back up if the time is not set in the timetable Day Set the backup interval Once Day Week Month Start On 2005 06 20 Every 1 On Every Day Clicking the arrow button in the Start On field displays a calendar Select the desired date by clicki
28. creen Displays camera images from the remote DVRs 35 User s Manual 4 2 ViSS WATCH Functions Logout Clicking the Logout button logs out of the ViSS program SEARCH Clicking the SEARCH button switches to ViSS SEARCH from ViSS WATCH ADMIN Clicking the ADMIN button switches to ViSS ADMIN from ViSS WATCH NOTE ViSS ADMIN is available only to the watchers registered as ADMIN class NOTE When there are no mouse clicks for more than 10 minutes you will be automatically logged out of the ViSS program To log in again click any button on the screen and follow the login procedures Display Mode Select the desired display mode single 2x2 3x3 4x4 5x5 6x6 7x7 8x8 or full screen i H 3 Double click the desired image when in multi screen display mode to view that image in single screen display mode Double click the image again to return to multi screen display mode Click the right mouse button on the screen when in full screen display mode to exit from full screen display mode Place the mouse cursor on an image and click the right mouse button The following screen option menu appears Camara d ocreen Layout Camera Full Screen ocreen Layout X Antialiasing Full Screen Display Characters On Screen Display Characters On Screen e Camera Closes the video display e Screen Layout Selects the screen mode 1x1 8x8 Full Screen Enters full screen mode Display Characters On Screen Selects
29. ction of ViSS ADMIN gt BACKUP for details Number of banks per storage min10 max200 default10 Enter the number of banks to allocate to a storage folder maximum 200 minimum 10 One bank equals 64MB NOTE ViSS saves data in storages consisting of banks 11 When the following setup box appears install ViSS JSP PAGE following the instructions When ViSS JSP PAGE is installed click Finish i Setup 4155 JSP PAGE e Welcome to the ViSS JSP PAGE Setup Wizard This will install iSS JSP on your computer It is recommended that you close all other applications before continuing Click Next to continue or Cancel to exit Setup 12 When the following setup box appears enter the proper language encoding value for the client system and click the Apply button The default value is utf 8 UNICODE i LanguageSetup TOMCAT WEBPAGE C Program Files apache Group Tomcat 4 1 5 webapps vis LANGUAGE ENCODING Apply Cancel 13 Restart the computer to complete the installation Video Streaming Server ViSS NOTE You can check if the ViSS JSP PAGE has been installed properly For example if the ViSS IP address is 1 2 3 4 e When connecting from the server connect to http 127 0 0 1 8080 ViSS and check if you can connect to the ViSS Application e When connecting from the client computer connect to http 1 2 3 4 8080 ViSS and check if you can connect to the ViSS Application 2 2 Configuration
30. d from the list and moved to the backup directory Program Files ViSS log folder Check the backup directory periodically and back up logs onto a separate storage device to ensure there is enough shared drive space 17 User s Manual STATUS A ViSS Admin Microsoft Internet Explorer 0970 ADMIN VIDEO STREAMING SERVER max dvr 512 max watcher 512 premium version 1 4 0 build 07040406 WATCHER viss p START 127 ESEEEESESILLLLLLLOLOCO O IUAXCREOII ERIS LOC IONDCOLERLELEOVGIIQI ECENECELELE OLEOLIURQIA NOOOLOALL 1 DVR Total 12 DVRs STATUS SETUP BACKUP RECORD 79 CODE PORT CAMERAS Images Sec KBytes Sec adr100plus Qa 0 4 0 000 0 000 ADRSDDCset HDR CQA idr32 QA IDRB115 JUNO Neptune SDA SDA410 set TINA c cgo m9 nm n29 n amp mn ml ooo ona CO CO L 1 1 1 a XDA std XDRDLXI CQA Watcher Total 1 Watchers ID Images Sec Manager 15 333 KBytes Sec 66 805 DVR Neptune 22 215 Images Sec fe SERIE H CAMERA 1 CAMERA 2 CAMERA 3 CAMERA 4 CAMERA 5 CAMERA 6 CAMERA 7 CAMERA 8 CAMERA 9 CAMERA 10 CAMERA 11 CAMERA 12 CAMERA 13 CAMERA 14 CAMERA 15 CAMERA 16
31. ect All Grants the watcher authority for all the registered DVRs Clicking the button saves the changes 16 Video Streaming Server ViSS A ViSS Admin Microsoft Internet Explorer Vioo ADMIN VIDEO STREAMING SERVER max dvr 512 max watcher 512 premium version 1 4 0 build 07040406 WATCHER LOG STATUS SETUP BACKUP RECORD viss activATED gt START N STOP Er List 10 All per page LOG CONTENT 2007 04 05 10 24 34 WRITE DATABASE TO DISK DRIVE 2007 04 05 10 24 28 WATCHER DATA UPDATED CODE potomato 2007 04 05 10 23 52 WRITE DATABASE TO DISK DRIVE 2007 04 05 10 23 45 WATCHER DATA REMOVED CODE test 2007 04 05 10 23 41 WRITE DATABASE TO DISK DRIVE 2007 04 05 10 23 35 WATCHER DATA INSERTED CODE potomato 2007 04 05 10 22 51 WRITE DATABASE TO DISK DRIVE 2007 04 05 10 22 45 WATCHER DATA UPDATED CODE test 2007 04 05 10 12 36 WATCHER LOGOUT WWATCHER_CHANNEL 0 ID COMPLETE 2007 04 05 10 12 36 WATCHER LOGOUT CHANNEL ID 1 2 31 4 5 6 7 8 9 10 gt gt 1 Select the 85 45 tab to display ViSS log entries Select Date or Contents in the SEARCH field located at the bottom right of the log list and enter the date or the contents of the log to search for Clicking the button displays the log entries on the screen NOTE A maximum of 100 000 logs can be displayed in the list When there are more than 100 000 logs the oldest logs are delete
32. edule ime Lapse T Sensor s Motion Detection m Video Loss v Object Detection o Video Blind b Records images when any of the selected events Oecum Quick Setup Quick Setup Uses the current settings of a selected camera for another camera s Click the Copy button and select another camera Then click the Paste zpem button Clicking Apply to All Cameras assigns the current settings to all cameras NOTE You can select several fields at a time by clicking the left mouse button and dragging to the desired day and time fields of the timetable Select Active and click the button to save the changes Sensor Use to record images from selected cameras when certain sensors are activated Schedule Schedule Sensor MotionDetection Video Loss ObjectDetection VideoBlind Select Sensor Selects a Sensor wae Camera Association Selects the camera number Dc you would like associated with the sensor You can C9 We 13 14 C 15 16 associate multiple cameras with a sensor Ol eh 25 26 a7 28 29C 30 C 31 32 Select Active and click the button to save the changes Camera Association gw 8 HB 8 8 ft E IH sg ue Du p Gg ug s e e EH eo m bp 92 Active 31 User s Manual Motion Detection Use to record images from selected cameras when motion events are detected Storage Sch
33. edule Schedule Sensor MationDetection Video Loss ObjectDetection VideoBlind T Select Camera Selects a camera mem Camera Association Selects the camera number 9 9 v ww t you would like associated with the camera that detects C9 CWE UC We 14 C IST 16 motion events You can associate multiple cameras EIC Gr C2c C230 1 17 184 194 206 21 22 231 24 with a camera oor 128 127 72872917900 791 752 Select Active and click the button to save the changes Camera Association E 8 ES SJ sg 20 f Tar 26 7 27 28 29 7 30 31 22 Active Video Loss Use to record images from selected cameras when video loss events are detected Storage Schedule Sensor MotionDetection Video Loss ObjectDetection VideoBlind x Select Camera Selects a Camera Camera Association Selects a camera number you e e s e 9 9 9 v would like associated with the camera that has lost C9 CiCcucCiCiCi 15 16 video You can associate multiple cameras with a C 17C 18C 19 20 21 22 C 23 24 camera 9 Me Mee Ma Ser Mal Mae Select Active and click the button to save the changes Camera Association ga 8 EN EN EN IH BH 8 8 8 8 8 HS HE BS SB IN IS EM B EM IN IS we eo ew Active 32 Video Streaming Server ViSS Object Detection Use to record images from selected cameras when object detection events
34. g speed and transfer speed of the connected DVR Clicking the button updates the data 18 Video Streaming Server ViSS SETUP HOLIDAY SETUP Select the Hanesan eere tab to set up holidays A ViSS Admin Microsoft Internet Explorer 090 ADMIN VIDEO STREAMING SERVER max dvr 512 watcher 512 premium version 1 4 0 build 07040406 WATCHER SETUP BACKUP RECORD viss gt START STOP STORAGE EETU E STORAGE WERTE El SETTLE DVRNS SETU FY Calendar Click the lt or gt button on the calendar to move to the previous or next month and click the lt lt or gt gt button to move to the previous or next year Click the desired date on the calendar or enter the desired date and click the button to set that date as a holiday Select any holiday in the holiday list and click the button to delete the selected holiday from the list NOTE Holidays that do not fall on the same date each year should be updated once the current year s holiday has passed STORAGE SETUP Select the 52 455 tab to set up the storage NOTE ViSS saves data in storages consisting of banks and you cannot back up or record data if storage is not allocated One storage folder equals 640MB to 12 800MB based on the number of banks allocated to the storage folder 19 User s Manual A visS Admin Microsoft Internet Explorer 197409 ADMIN DEO STREAMING SERVER
35. iSS will back up only key frames of recorded video from each channel so it is possible to back up a larger quantity of recorded data and to make the backup speed faster 26 Video Streaming Server ViSS NOTE When the number beside Actual Storage is less than the number in the Storage field you can increase the Actual Storage number by allocating more storage folders in Backup Allocated in the SETUP settings by decreasing the number of registered DVRs in the DVR settings When a DVR is deleted storage folders in Actual Storage of the deleted DVR automatically move to Actual Storage of other DVRs NOTE When using the storage switch function ViSS automatically allocates the same number of backup storage folders to each disk group when allocating backup storage to the DVR For example when allocating three backup storage folders for the selected DVR Disk group 1 has three storage folders and Disk group 2 also has three storage folders for the DVR CAUTION Clicking the button deletes all images from the selected DVR Make sure that you want to delete all images before clicking the button Backup Section You can set up the time span of images to back up First Image Time 2005 02 24 44123 top B Last Image Time 2005 02 24 EE 4 41 23 Set the backup starting and ending dates and times in the First Image Time and Last Image Time by typing the number or using the arrow buttons Cli
36. ick Next Additional icons Create a Quick Launch icon lt Back Cancel User s Manual 4 The progress bar shows the installation progress Setup ViSS l loj xl Installing Please wait while Setup installs ViSS on your computer Extracting files CARVISSPRM WIS St vissbackup pdb zin Completing the ViSS Setup Wizard Setup has finished installing ViSS on your computer The application may be launched by selecting the installed icons Click Finish to exit Setup SMS TOMCAT JSP PAGES Register ViSS As A Service M Run Service NOTE The selected programs will be installed on the computer in order 6 When the following WIBU KEY Setup box appears click Next Follow the instructions in the setup boxes to install the WIBU KEY Lock program 4 WIBU KEY Setup This program will install WIBU KEY Software on your E Welcome to the WIBU KEY Software Setup program computer It is strongly recommended that you exit all Windows programs and the control panel before running this Setup program Click Cancel to quit Setup and then close any programs you have running Click Next to continue with the Setup program Version 5 00 Video Streaming Server ViSS 7 When the following JAVA setup box appears select accept the terms in the license agreement and click Next Follow the instructions in the setup boxes to install
37. installing the ViSS software the default settings are as follows FRAME RECOVERY USE OR NOT USE RECOVERY USE FRAME RECOVER 0 O normal backup 1 frame recovery backup Starttime MARGIN endtime MARGIN FRAME RECOVER MARGIN SECONDS 300 Additional backup period s before and after ViSS fails in recording When set to Schedule Backup ViSS backs up following the backup schedule regardless of the setting of additional backup period s before and after ViSS fails to record FRAME RECOVERY USE OR NOT USE RECOVERY USE FRAME RECOVER 1 0 normal backup 1 frame recovery backup Starttime MARGIN endtime MARGIN FRAME RECOVER SECONDS 300 Additional backup period s before and after ViSS fails in recording Based on the settings above ViSS backs up recorded video during the period when ViSS fails to record Additionally images for 5 minutes 300 seconds before and after the failure period are backed up NOTE The system must be restarted to apply changes after changing the settings NOTE Frame Recovery Backup will be supported only while the remote DVRs are in Record mode NOTE If there is additional loss of video while ViSS is recovering lost video recorded video for up to 10 occurrences including the current backup section will be backed up 25 User s Manual A viss Admin Microsoft Internet Explorer W iux ADMIN VIDEO STREAMING SERVER max dyr 512 max watcher 512 premium version 1
38. lems click the right mouse button on the background screen and select Properties gt Settings then set the Color quality to 32 bit Then select Advanced gt Troubleshoot and set the Hardware Acceleration to Fulf Please make sure that DirectX version 8 0 or higher has been installed if the display problem continues to occur To check the version of DirectX click Start gt RUN and type dxdiag then hit the enter key which will display DirectX Diagnostic Tool dialog box Move to the Display tab and make sure DirectDraw Acceleration is set to Enabled then test DirectDraw by selecting the DirectDraw Test button After changing the settings update the driver version of the VGA card If you still have display problems after changing all display settings as described above try replacing the video card Video cards with an ATI chipset are recommended Clicking the X exits the Player program Click the playback buttons Goes to beginning of the video clip 4 Plays the video clip in fast reverse 4 Goes back one frame of the video clip Plays the video clip i Goes forward one frame of the video clip bp Plays the video clip in fast forward P Goes to the end of the video clip Click the to display the previous page and click the EB to display the next page Click the EH to cycle through the screen layouts It cycles through 2x2 3x3 and 4x4 Click to select from Save Print Info Image Processing
39. m NOTE The WIBU KEY must be connected to the ViSS server in order to run the ViSS program When you restart the server system after installing the ViSS software the ViSS daemon ViSS Control and TOMCAT web server programs initiate automatically You can also start the ViSS program by clicking ViSS Service Run in the ViSS folder of the Startup menu or by double clicking the ViSS shortcut i icon on the desktop Then connect a WIBU KEY to a USB port ViSS Client Program You can run the ViSS client program by connecting to the server system currently running on the web browser Connect to http 1 2 3 4 8080 ViSS In this example the ViSS IP address is 1 2 3 4 Obtain IP address information from the system manager Login The ViSS Application program provides two ways of connection depending on the Watcher s class ViSS ADMIN and ViSS PUBLIC Connect to the ViSS program and the ViSS Login page appears NOTE ViSS ADMIN is available only to the watchers registered as ADMIN class Refer to 3 2 ViSS ADMIN Functions WATCHER for details on the Watcher registration SIGH IH Enter the ID and password and click SIGN IN NOTE The default ID is admin and the default password is 12345678 NOTE When using Internet Explorer 7 0 a ViSS page might not be displayed in certain resolution In this case set up Auto hide the taskbar and Allow websites to open windows without address or status bars functions according to the following pro
40. ng on it Use the arrow buttons to adjust the numbers in the Every field setting the backup interval For example ViSS backs up every day when the interval is set to 1 and ViSS backs up every other day when the interval is set to 2 Set the backup time by using the timetable NOTE If the time is not set ViSS will not back up Week Sets the day s of the week to perform backups Once Day Week Month Repeat On SUN MON TUE WED THU FRI SAT HoL T ALL You can select a combination of individual days of the week HOL holidays or ALL to select all days to perform backups Set the time to perform a backup using the timetable NOTE If the time is not set ViSS will not back up 28 Video Streaming Server ViSS Month Sets the date s of the month to perform backups Once Day Week Month m a m 4 5 B B 8 9 B BE 12 BU 14 EU 16 EU 18 19 20 22 23 24 26 28 29 30 31 ALL Select the desired backup dates by clicking in the check boxes Set the backup time using the timetable NOTE If the time is not set ViSS will not back up Selecting Active and clicking the button save the changes A ViSS Admin Microsoft Internet Explorer ADMIN DEO STREAMING SERVER max dvr 512 max watcher 512 premium version 1 4 0 build 07041211 STATUS SETUP BACKUP RECORD viss activATED gt START N STOP
41. o Streaming Server ViSS NOTE When playing back images first click the stop button and then select the desired button to use the other playback related functions Search Mode Time Lapse Mode 7 You can search for recorded or backed up images by time and play back images in the time lapse mode Select the date of the image to search for from the calendar MES EA EX ESTER EA PES E 4 mu b Ch c nm M 2 23 24 29 30 31 m bb Dates displayed in black indicate that there are images to be played back When selecting a date the first image from the selected date displays on the screen A timetable shows the time information about the image s on the selected date Clicking a specific time displays the image recorded at that time on the screen I3 3 MiseonEniull Segment 0 vE 82 G3 Ga Gs G7 G9 P 1 12 19 14 B 16 17 38 20 21 The brown color bar indicates that there are recorded images within that time rage Clicking on a time within the time range displays the image from that time If ViSS or the remote DVR s time and date have been reset to a time that 1s earlier than some of the recorded video and ViSS has more than one video segment in the same time range select the video segment you want to search from the SEGMENT menu at the top right corner on the timetable You also need to select the video segment when video in the time range you want to search
42. rver program Runs the ViSS server system ViSS Control exe Daemon program Starts and stops the ViSS software ViSS exe Supports real time monitoring searching recording and backup ViSS Backup exe Supports frame recovery backup and searching backup images ViSS client program ViSS ADMIN DVR registration and program setup ViSS SEARCH Search and playback of the DVR images saved in ViSS ViSS WATCH Real time monitoring for remote DVR images 1 2 Product Information Product Components User s Manual This Document ViSS Software Installation CD WIBU KEY USB System Requirements Server System Hardware Maximum 16 users and 64 DVR 4 channel models connections e CPU Pentium4 2 4 GHz or faster Dual core 2 8 GHz Recommended RAM IGB or more Hardware 10GB or more free space e Network T1 T3 Broadband Line Maximum 64 users and 256 DVR 4 channel models connections e CPU Pentium4 2 8 GHz or faster Dual core 3 0 GHz Recommended RAM 2GB or more Hardware 10GB or more free space e Network T1 T3 Broadband Line User s Manual Maximum 512 users and 512 DVR 4 channel models connections e CPU Pentium4 3 0 GHz or faster Dual core 3 0 GHz Recommended RAM 3GB or more Hardware 10GB or more free space e Network T1 T3 Broadband Line NOTE Make sure enough space is available on your hard disk drives for recording and backup Software Operating System Windo
43. ss Object Detection Video Blind Select target channel s for each event triggered device Clicking the Find button starts the search process Search By Camera Select the Camera in the Search By field to search for image by cameras associated with events 42 Video Streaming Server ViSS Event Search Search By From M First To M Last Camera Event V1 3 v4 iv Alarm In Motion Video Loss Video Blind 5 7 8 11 12 13 lv 15 M16 iv Object Detection From Selecting First searches from the first recorded data If you want a specific starting date and time delete the checkmark and enter the desired date and time To Selecting Last searches until the last recorded data If you want a specific ending date and time delete the checkmark and enter the desired date and time e Camera Event Select target camera number s associated with each event and select event option s Clicking the Find button starts search process Click the QUERY NEXT 3 button to search for the next set of results in case there are more than 100 images Print Click the j button to print the current image Save Click the BI button to save images Save As ClipCopy e Save As Image Saves the current image as omp or jpg file e Save As ClipCopy Saves a video clip of the recorded or backed up data as an exe file Save As ClipCopy 2005 12 09 10 20 49
44. strator permissions Restart your computer to apply the changes User s Manual 10 Video Streaming Server ViSS Chapter 3 ViSS ADMIN 3 1 Overview ViSS ADMIN the main administration program controls the ViSS program It allows watchers classified as ADMIN to manage DVRs and watchers registered on the ViSS program and to back up and record images The following is the Graphical User Interface GUI of ViSS ADMIN F viss Admin Microsoft Internet Explorer 019740 ADMIN VIDEO STREAMING SERVER max dyr 512 max watcher 512 premium version 1 4 0 build 07040406 viss AcTIvaTED gt START STOP 4 On 3 4 5 6 7 8 9 1 Start Releases sleep mode on the ViSS server program 2 Stop Sets up sleep mode on the ViSS server program 3 DVR Manages the DVRs registered on the ViSS program 0 WATCHER Manages Watchers registered on the ViSS program 5 LOG Displays log entries 6 STATUS Displays a list and the status of DVRs or Watchers currently connected to the ViSS program D SETUP Used to set up holidays storage switch function and DVRNS and allocates storages BACKUP Used to set backup related settings RECORD Used to set up recording related settings WATCH Switches to ViSS WATCH 40 SEARCH Switches to ViSS SERCH 2 LOGOUT Logs out the ViSS program NOTE ViSS ADMIN is available only to the watchers registered as ADMIN class 3 2 ViSS ADMIN Functions START Click the STAR
45. the remote DVR NOTE Image adjustment PTZ control and alarm out control may not be supported and depends on the specifications of the remote DVR Event List The event log is displayed at the bottom of the main screen EVENT DATE TIME 2006 06 01 2 10 20 31 2006 06 01 2A 10 19 31 2006 06 01 2 1 10 19 31 2006 06 01 2A 10 19 03 e SITE Displays the name of the DVR and each camera associated with the event EVENT Displays the event information The description of event icons and their meanings follow IN Normal Event Emergency um Alarm In s Motion Event Detection EP Object Hr Video Loss 2 Video Blind Text In Detection e DATE TIME Displays the date and the time when the event occurred 38 Video Streaming Server ViSS Chapter 5 ViSS SEARCH 5 1 Overview ViSS SEARCH is a search and playback program that allows Watchers to search and play back recorded or backed up images that are on ViSS It provides search modes Time lapse search and Event search The following is the Graphical User Interface GUI of ViSS SEARCH E VisS Search Microsoft Internet Explorer 4 2005 12 gt MIWTF 56 T 8 9 40 oo 01 02 o3 05 06 07 o9 11 12 14 15 1 17 18 19 20 21 22 23 24 D Logout Button Logs out of the ViSS program 2 WATCH Button Switches to ViSS WATCH 3 ADMIN Button Switches to ViSS ADMIN 4 Storage Button Selects the storage area to search
46. the following folders in each drive and delete the storage Backup Storage IBBANK folder e Record Storage ViSS STORAGE folder NOTE You can improve system performance by optimizing the hard disk drive with the disk drive optimizing program 21 User s Manual STORAGE SWITCH SETUP Select the STEERAGE Evene hy SEGUE tab to set up the storage switch function ViSS can save images in one disk group while exporting images saved in the other disk group to external devices without network delay using the Storage Switch function The drives installed in ViSS must first be divided into two Disk Groups and the storage switch function must be set up Disk Group NOTE Before changing the Disk Group settings first STOP the ViSS Daemon program ViSS Control Move to the disk config file in the ViSS folder to change the disk group settings The default settings are as follows DISKGROUPS 2 Number of disk groups DISKGROUP BEGIN Disk group 1 begins DISK C DISK F DISK G DISK J Disk group 1 DISK K DISK M DISKGROUP END Disk group 1 ends DISKGROUP BEGIN Disk group 2 begins DISKGROUP END Disk group 2 ends Change the settings as follows if you want to allocate disk drives to Disk group land Disk group 2 and use the storage switch function NOTE The system must be restarted to apply changes to the settings DISKGROUPS 2 Number of disk groups DISKGROUP BEGIN Disk group 1 begins DISK C DISK F Disk group
47. ual Encryption icons display in bottom right corner amp indicates the clip file has not been tampered with and J indicates the system has detected tampering Click the slider bar and move it left or right to move through the video clip Placing the mouse cursor on an image and clicking will cause that image to display full frame 46 V1 4
48. ws XP Professional Service Pack 1 Service Pack 2 Windows Server 2003 Service Pack 1 e Software Platform JAVA Auto installed Protocol TCP IP HTTP Client System Operating System Microsoft Windows 2000 Microsoft Windows XP Microsoft Windows Vista Application Internet Explorer 6 0 or above CPU Intel Pentium II Celeron 800MHz or faster e RAM 512MB or more VGA AGP Video RAM 8MB or more 1024x768 24bpp or higher System Diagram __ ey DVR 3 DVR a DVR a DVR Video Streaming Server ViSS Chapter 2 ViSS Software 2 1 Installation 1 Insert the ViSS software installation CD into the sever computer 2 Run ViSSPremiumSetup exe file Click Next and then install the software following the instructions in the setup boxes Setup ViSS Welcome to the ViSS Setup Wizard This will install ViSS Premium 1 1 3 0511301 on your computer It is recommended that you close all other applications before continuing Click Next to continue or Cancel to exit Setup 3 When the following setup box appears select the desired task and click Next Install the software following the instructions in the setup boxes 215 x Select Additional Tasks Which additional tasks should be performed Select the additional tasks you would like Setup to perform while installing ViSS then cl
Download Pdf Manuals
Related Search