User manual
Contents
1. and set the temperature control to the desired position 2 Once the indicator light is on place the iron on a smooth and stable vertical surface for easy and efficient ironing 3 Once the indicator light goes off wait for a while before you continue ironing Self Cleaning lt is important to apply self cleaning at least every two months to remove impurities etc The harder the water the more the iron should be self cleaned Set the temperature control to MAX level Insert the mains plug into the wall socket Allow the iron to heat up until the temperature pilot light goes out Then set the temperature dial to position MIN Hold the iron horizontally over the sink then remove the variable steam control knob from the body enabling the iron to self clean Boiling water and steam will now be ejected from the holes in the soleplate Impurities are washed away with it Move the iron forwards and backwards while this occurs Setthe steam control to 0 position when the water reservoir has become empty Repeat self cleaning if you notice that there is still impurities or residue left over Move the iron over a preferably old piece of cloth This is to ensure that the soleplate will be dry during usage Unplug and allow the iron to cool down before storing it Vertical Steam The appliance is capable of generating steam even when in the vertical position this function is especially useful for refreshi2. electric shock when the iron is used Ifthe supply cord is damaged contact Sytech Service Centre Ifthe iron is not operating normally disconnect it from the power supply Contact Sytech service Center Close supervision is necessary for any appliance being used by or near children Do not leave the iron unattended when connected to the mains or on an ironing board Children should be supervised to ensure that they do not play with the appliance Burns can occur from touching the hot metal parts hot water or steam Be extremely careful when you turn a steam iron upside down as there may be hot water in the reservoir Your iron is designed to rest on the heel Do not leave the iron unattended when switched on Do not place the iron on an unprotected surface even if it is on its heel rest This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Keep electrical appliances out of reach from Children or infirm persons Do not let them use the appliances without supervision Power supply 230V 50 60Hz 2200W Descriptions of Parts A Soleplate B Spraying nozzle C Water tank D Water tank inlet cover E Spray button F Shot of steam button G Handle H Flexible cord prote
3. lt YTECH SY PV18 Professional Steam Iron User Manual Welcome Congratulations on the purchase of your new steam iron SY PV18 In order to fully benefit from this product please read the following instructions carefully Store this user manual in a safe place for future references Safety Instructions Use the iron only for its intended use Make sure that the voltage on the rating label of the iron is the same as the place where the unit will be used When using the iron for the first time test it on an old piece of fabric to ensure that the soleplate and boiler are completely clean To protect against the risk of electric shock do not immerse the iron in water or other liquids The temperature setting must always be turned to min before plugging or unplugging from the mains outlet Never pull the cord to disconnect from the mains instead grasp the plug and pull to disconnect Do not allow the cord to touch hot surfaces Allow the iron to cool completely before storing away Always disconnect the iron from the electrical outlet when filling with water or emptying and when not in use Keep the sole plate smooth at all times avoid hard contact with a metal object Do not operate the iron with a damaged cord or if the iron has been dropped or damaged To avoid the risk of electric shock do not disassemble the iron Contact Sytech Service Centre Incorrect re assembly can cause a risk of
4. ctor I Heel rest J Power indicator light Auto shut off indicator light K Self clean button L Steam control M Temperature control knob Filling water 1 Make sure the switch is not connected to the wall outlet before filling water 2 Set the steam control to the minimum position 3 Pull down the cover of the water filling mouth and then fill water until the reservoir is filled up 4 Never exceed the MAX level as marked on the unit Setting the temperature gt Synthetics Silk gt Wool gt Cotton Linen Ironing with Steam Set the temperature control M to position or for moderate steam and to for maximum steam With conventional steam irons water may leak from the soleplate if a low temperature has been selected Ensure that there is enough water in the water reservoir Rest the iron on its heel Insert the mains plug into the wall socket Wait a little while for the indicator light to go off and come on again Adjust the steam using the steam control knob Burst of Steam Press the F button to emit an intense burst of steam from the soleplate In order to avoid water leaking from the soleplate do not press the steam button for too long Spraying Press the spray button E and water will be sprayed out from the spraying nozzle Make sure there is water in the reservoir at all times 1 Turn the variable steam knob L to the lowest position 0
5. ng clothes and curtains The appliance is fitted with an anti drip device to enhance steaming and prevent drips of water from the soleplate Anti Calc The appliance is fitted with an anti calc device to reduce the lime scale build up in the water tank and extend the product life Cleaning amp Maintenance Set the steam control to the lowest position and remove the plug from the wall socket allowing for the unit to cool down completely Once it has cooled down wipe the soleplate with a damp cloth and a non abrasive liquid cleaning agent Jo keep the soleplate smooth avoid contact with hard metal objects Never use a scouring pad vinegar or other chemicals to clean the soleplate Clean the upper part of the iron with a damp cloth Regularly rinse the water tank with water Empty the water tank after you have rinsed it Set the steam control position to the lowest position and remove the plug from the wall socket allowing for the unit to cool down completely Pour out any remaining water left in the water tank Wind up the mains cord Store the iron on its heel and in a safe and dry place Specifications Power Consumption 2200W Voltage 220 240V Rated Frequency 50 60Hz Water tank capacity 300ml steam Capacity 15 20g Max temperature 200 C 250 C Exterior measurements 29 5X11 9X14 5 CM Soleplate measurements 23 1X11 9CM Environment This marking indicates that this product should no
6. t be disposed with other household wastes throughout the EU To prevent possible harm to the environment or human health from uncontrolled waste disposal recycle it responsibly to promote the sustainable reuse of material resources To return your used device please use the return and collection systems or contact the retailer where the product was purchased They can take this product for environmental safe recycling Declaration of Conformity Manufacturer name Satyatrade S L Address Pol Ind La Raya C Guadalquivir 2 Camarma de Esteruelas 28816 Madrid Tel 902 430 967 Fax 91 8864285 NIF B83254763 Manufacturing country China Sytech SY PV18 complies with the following directives This product complies with the following directives LVD Low Voltage Directive 2006 95 EC RoHS standard 2011 65 EU Restriction of Hazardous Substance JAL C vot Signed Ajeet Nebhwani Utamchandani Sole Administrator
Download Pdf Manuals
Related Search