Preparation before Use When using Windows® When using Mac OS
Contents
1. Avoid looking directly at the light of the sensor as doing so may cause eye damage Battery cover This cover is removed to install batteries Power switch Used to turn the mouse body on and off Battery housing Batteries are inserted here Receiver unit housing Used to store the receiver unit USB connector Male Connected to a PC USB port Inserting and Taking Out the Receiver Unit E Inserting the receiver unit 1 Remove the battery cover 2 Place the receiver unit into the receiver unit housing 3 Install the battery cover E Taking out the receiver unit 1 Remove the battery cover 2 Take the receiver unit out of N the receiver unit housing 9 J 3 Install the battery cover When using Windows Step Check USB ports Check the USB port on your computer USB port e Any USB port may be used e This product can be connected to a USB hub However it may not work depending on the power supply capability of the USB hub Step2 Installing the Receiver Unit 1 Activate the PC e If Windows prompts you to choose an account a user name when it starts up be sure to log on using an administrator account e Wait until Windows has started up completely 2 Insert the receiver unit into the USB port of the PC Insert here Q e Carefully check the orientation of the connector and the place where you will connect the2. CEES go I gt Control Panel System and Security System 4 Search Contra Pane P e Windows XP 1 From the Start menu right click My Computer J My Network Places Explore Search BR Control Panel Manage Set Program Access and Map Network Drive Defaults 2 Click Properties 3 Click the Hardware tab Disconnect Network Drive E Printers and Faxes Show on Decktnn Help and Support bs E e ipen p search All Programs gt W Run 2 Log Off Turn Off Computer 4 Click _Device Manager System Properties System Restore Atomica Tem General Computer Name Advanced Device Manager The Device Manager lists all the hardware devices installed be on your computer Use the Device Manager to change the properties of any device Drivers ECA NeverSianina late vai make sure thatinstallad divem am 2 The Device Manager window appears Right click the unknown device and click Uninstall Hrse e2 a zraea By TECS IZNXEIKEXY Se Disk drives i s 2 DVOROM d Floppy disk controllers Cmr rds 7 a Scan For hardware changes Confirm Device Removal VY Unknown Device Warning You ate about to uninstall this device from your system 4 Disconnect the receiver unit and restart the PC re K Cancel 5 Repeat the procedure from Step 2 Installing the Receiver Unit on the fron
3. have an automatic channel avoidance function gt Operation becomes unstable when battery power is low See Installing Replacing the Battery on the reverse of this sheet and replace the batteries as soon as possible e The alkaline batteries supplied with this product are for checking product operation These batteries may discharge and drain during storing and shipping When not using the mouse turn it off to save battery power gt It is possible that the standard Windows mouse driver did not install correctly and that this product is detected as an unknown device by Windows This product is usually detected as a USB human interface device If it is detected as an unknown device see Removing an unknown device and after removing the device from Device Manager repeat Step 2 Installing the Receiver Unit on the front of this sheet gt If you have installed drivers and settings utilities produced by the original manufacturer for a previous mouse uninstall them first This product may not operate correctly if a driver made by another company is installed See the instruction manual that was supplied with your previous mouse for uninstall instructions It is possible that the driver is conflicting with another driver such as that for a laptop touch pad To use this product correctly you must delete the touch pad driver However if you delete this driver you may not be able to use the touch pad or touch pad funct
4. ELECOM M SODL series Like a SPOON 2 4GHz Wireless Laser sensor mouse Stainless steel Wireless Laser Mouse M SODL Series User s Manual Thank you for purchasing the ELECOM M SODL Series wireless laser mouse This manual describes the operating instructions and safety precautions for using the M SODL Series Ensure that you have read this manual before using the product After reading this manual store it somewhere safe for future reference Except in certain cases the M SODL Series is referred to as this product in this manual Safety Precautions E Meaning of symbols N WARNING Failure to observe precautions NW ARNING may result in serious personal injury or death due to fire electric shock or other causes Do not attempt to disassemble modify or repair this product by yourself as this may cause a fire electric shock or product damage Failure to observe precautions may result in personal injury NCAUTION due to electric shock or other causes and may damage other equipment S Prohibited action aly Mandatory action A Situation that needs attention O Notes and reference information Information that is handy to know Observe these precautions carefully to avoid personal injury damage fire and other problems N WARNING Do not put this product in fire as the product may burst resulting in a fire or injury Do not connect or disconnect the rece
5. Laser Mouse Though this product complies with the IEC60825 1 Class 1 laser safety standard to ensure safety pay special attention to the following before use 1 Never observe the laser beam by using an optical measure such as a microscope or magnifier or view the laser with the naked eye for a long period of time Doing so may have an adverse effect on the eye Some laser beams cannot be seen with the naked eye 2 Never aim the rear surface of the mouse at a person s eyes as this is very dangerous 3 The laser sensor may not work on glass or mirrored surfaces 4 Do not use this product for any application other than as a PC mouse 5 If this product is subjected to temperatures beyond its specifications turn of the PC and do not use the product until the temperature returns to the operable range 6 If this product is not operating normally turn of the PC CLASS 1 LASER PRODUCT Package Contents This product s packaging contains the items listed below Before using the product check that all items are present We make every effort to ensure that all products are packaged correctly However in the event that an item is missing or damaged contact the retailer from whom you purchased the product e Mouse x1 e Receiver unit x1 e AAA alkaline battery x1 e User s Manual x1 Part Names E Mouse E Receiver unit Preparation before Use Installing Replacing the Battery Before using this pro
6. MouseAssistant2 InstallShield Wizard x Do you want to completely remove the selected application and all ofits features This completes the unistallation process Uninstalling ELECOM MouseAssistant 2 for Mac OS X To reinstall ELECOM MouseAssistant 2 for Mac OS X uninstall the existing version of ELECOM MouseAssistant 2 first Q e Login with a user account that has administrative privileges e It is recommended that all programs application software be terminated 7 Delete the wo icon that is registered in the Dock Remove from Dock gt lt lt Q To remove icons from the Dock the Enable access for assistive devices check box in Universal Access under System Preferences must be selected Double click ELECOM_Uninstall in the utilities folder in the Finder application folder B Click Gow Uninstall the ELECOM Mouse Assistant Mac Version ad ELECOM_Uninstall If Enable access for assistive devices is not checked in Universal Access of System Preferences the Dock icon will not be deleted 4 Type an administrator username and password and then click Type your password to allow 4 ELECOM_Uninstall to make changes Name User Name Password eves Details 5 When the software is uninstalled click Restart and then restart your Mac Un installation is complete Restart the system This completes the unistallation
7. When the product appears to be malfunctioning E When the mouse pointer on the screen does not move or moves unstably when the mouse is moved gt It is possible that the reflectivity of the surface on which this product is being used is not suitable for an optical mouse gt When using this product on a metallic surface such as a steel desk radio wave outreach may be shortened In such cases move the receiver unit closer to the mouse until mouse operation stabilises gt It is possible that the receiver unit is not connected correctly to the USB port Disconnect the receiver unit from the USB port and reconnect it gt The receiver unit and the mouse body are too far apart or there is a possibility that the receiver unit is facing in a direction from which it cannot receive radio signals Adjust the position of the receiver unit The operable range of this product is the area within a circle Approximately with a radius of 7 m T from the receiver unit Depending onthe Receiver unit usage environment the mouse may not operate even when it is within approximately 10 m of the receiver unit In such cases move the mouse closer to the receiver unit until operation stabilises gt Interference may occur if multiple units of this product are used together or if this product is used with other wireless devices In this case change the channel of other wireless devices Multiple units of this product
8. all bear no responsibility for any and all affects resulting from the use of this product regardless of the above reasons Export or service transaction permission under the Foreign Exchange and Foreign Trade Control Law is required in order to export this product or parts of this product that constitute strategic materials or services Windows and the Windows logo are trademarks of the Microsoft group of companies Mac Mac OS and Macintosh are registered trademarks or trademarks of Apple Inc in the United States Company names product names and other names in this manual are generally trademarks or registered trademarks 2009 ELECOM Co Ltd All Rights Reserved
9. ange Install Location Go Back C Install Type your password to allow Installer to make 6 Enter a user name and password with n ia administrative privileges and click D aes 7 Click Continue installation Install ELECOM Mouse Assistant 2 Mac version E When this software finishes installing you wi must restart your computer Are you sure i u want to install the software now Introduct a ian Destinati ae a Installati Change Install Location Go Back Install File copying starts 8 After installation is complete click Restart to restart the Macintosh ANA Install ELECOM Mouse Assistant 2 Mac version The installation was completed successfully The installation was successful Introduction Destination Select Installation Type Installation Summary The software was installed Click Restart to finish installing the software Now the installation of the ELECOM MouseAssistant 2 for Macintosh is complete NA e After restart mouse functions can be set Clicking the yw icon registered in the Dock causes the utilities to start The 9 icon is only registered in the Dock for the user who installed the software If you are not the user who installed the software click Applications gt Utilities and double click ELECOM_Mouse_Util For the setting method see the help file
10. duct install one AAA battery in the mouse body 7 Remove the battery cover Press part Q firmly to the right to remove the cover easily 2 Insert the battery Y e Make sure that the polarity is correct 3 Install the battery cover Turning On and Off the Mouse E Turning on the mouse When using this product turn the mouse body OFF ON power on Slide the power switch to the ON position E Turning off the mouse OFF When not using this product turn the mouse body off to save battery power Slide the power switch to the OFF position 16 E Restoring from sleep state Click the right mouse button OG To reduce battery drain the mouse enters sleep mode automatically if it is left without being operated for a certain period of time with the power or switch turned on Q Tilt wheel The tilt wheel can be turned back and forward with your finger or pressed like a button to operate the PC Tilting the tilt wheel to the right or left lets you scroll horizontally Q You must download and install ELECOM MouseAssistant 2 for Windows from our company s web site to use the horizontal scrolling function with Windows DuUsing the horizontal scrolling and button allocation functions See reverse Right button Used for right click operation Left button Used for left click operation Laser sensor When the mouse body is moved this sensor detects mouse movement
11. e where condensation may occur In an uneven place or a place exposed to vibration e In a place where a magnetic field is generated near a magnet etc In a dusty place This product does not have a waterproof structure Use and store this product in a place where the product body will not be splashed with water or other liquid Rain water mist juice coffee steam or sweat may also cause product damage QD When you no longer need to use this product and the battery be sure to dispose of it in accordance with the local ordinances and laws of your area E Batteries CAUTION Use AAA alkaline batteries AAA manganese batteries or AAA nickel hydride batteries with this product D If this product will be unused for a long period of time remove the battery to avoid battery leakage and failure E Cleaning the Mouse If the product body becomes dirty wipe it with a soft dry cloth Q Use of a volatile liquid paint thinner benzene alcohol etc may affect the material quality and colour of the product Cautions for Wireless Equipment This product is wireless equipment using the entire range Z 4D ST of the 2 4 GHz band and it is possible to avoid the band of mobile object identification systems DS SS is used for the radio wave method The interference distance is 10 m The 2 4 GHz band is also used by medical equipment Bluetooth and wireless LAN equipment conformin
12. g to the IEEE802 11b 11g standard e Before using this product check that there are no other radio stations operating nearby e If electromagnetic interference occurs between this product and other radio stations move this product to another location or stop using this product Other radio stations refer to industrial scientific and medical devices using the 2 4 GHz band like this product other radio stations of this type licensed radio station premises for mobile object identification system that is used in factory production lines certain non licensed low power radio stations and amateur radio stations N WARNING S e Do not use this product with a device that may have a serious function or influence There are rare cases where an external radio wave at the same frequency or the radio wave emitted from a mobile phone causes this product to malfunction slow down or fail to operate e Do not use this product in a hospital or other locations where the use of radio waves is prohibited The radio waves of this product may affect electronic and medical devices e g pacemaker e The use of a wireless mouse in an aircraft is prohibited by aviation law because doing so may interfere with flight safety Turn off the power of the mouse body before boarding an aircraft and do not use it in the aircraft ELECOM is not liable for any accident or social damages incurred by the failure of this product Cautions for
13. in Windows Internet Explorer 1 From the Start menu select All Programs and then Internet Explorer Internet Explorer will launch 2 Display your favourite web site in Internet Explorer and change the size of the window so that the vertical scrollbar appears The sample wena used here is the ELECOM homepage me gt te Beyond Dinital I ifo as nite BSD Internet Protected Mode On 3 Scroll the tilt wheel back and forth F ELECOM WEB STE Windows Interet Explorer t QO Am F Se Favorites Y ELECOM WEB STE lt 1 s es The mouse is operating normally if the screen moves up and down as you scroll the tilt wheel e In applications that do not support scrolling the screen will not move when you scroll the tilt wheel In order to use this product s horizontal scrolling function you must download and install ELECOM MouseAssistant 2 for Windows from our company s web site Proceed to Using the horizontal scrolling and button allocation functions on the reverse of this sheet 1 Click the Safari icon in the Dock Safari will launch YQ If Safari is not in the Dock double click the Safari icon in the Applications folder 2 Display your favourite web site in Safari and change the size of the wind
14. ions Contact the PC manufacturer for more details E The wheel moves but the mouse cursor does not gt In certain applications that do not support the scrolling function the mouse cursor will not move when you move the wheel Removing an unknown device If the standard Windows mouse driver did not install correctly and this product is detected as an unknown device remove the unknown device from Device Manager and then repeat Step 2 Installing the Receiver Unit on the front of this sheet O e If there are multiple unknown devices before removing a device check that it is actually this product Disconnect the receiver unit and check which unknown device disappears The device that disappears is this product e If the unknown device does not disappear even after you have deleted the driver following the instructions below it is possible that there is something wrong with the PC Contact the PC manufacturer With the receiver unit connected to the PC follow the procedure below to remove the unknown device Be sure to log on using an administrator account when Windows starts up Screen display may differ depending on operating system but the procedure remains the same 1 Display Device Manager e Windows 7 and Windows Vista 1 From the Start menu right click Computer 2 Click Properties J ro es A Remote Desktop Connection Pe S a 3 Click Device Manager
15. iver unit with a wet hand modify the receiver unit or bend it forcibly as this may cause a fire or electric shock Always keep the receiver unit out of the reach of children as there is a danger that they may swallow it CD If a foreign object water metal chip etc enters the product immediately stop using the product and disconnect the receiver unit from the PC and remove the battery from the mouse If you continue to use the product under these conditions it may cause a fire or electric shock If an abnormality is found with this product emission of heat smoke or abnormal smell from the product immediately stop using the product shutdown the PC and after thoroughly checking that heat from the product will not cause burns disconnect the receiver unit from the PC and remove the battery from the mouse After doing this contact the retailer from whom you purchased the product S Do not drop or hit this product If this product is damaged immediately stop using the product and disconnect the receiver unit from the PC and remove the battery from the mouse If you continue to use the product in a damaged condition it may cause a fire or electric shock NCAUTION Do not place this product in any of the following environments In a car exposed to sunlight a place exposed to direct sunlight or a place that becomes hot around a heater etc eIn a moist place or a plac
16. ll it e Login with a user account that has administrative privileges e It is recommended that all programs application software be terminated Though the subsequent screens of the installation program differ depending on the OS the procedure is the same KA mouse_driver_xx The file name may be different depending x on the version of the driver 2 The installer is activated Q B Click Ke 2 7 ELECOM MouseAssistant2 InstallShield Wizard uu 2 different mouse utility is already installed on your computer EM remove it following the instructions in the user s manual provided with the relevant mouse 1 Double click the downloaded mouse_ driver_xxxx exe When the user account control screen is displayed click Permit or Continue F you need to remove an existing mouse utility click Cancel remove the utility and then redo the Mouse Assistant 2 setup Na e If other mouse utilities have been installed click _ Cancel to uninstall them e If a previous version of MouseAssistant has been installed follow the instructions on the screen to uninstall it 6 Click Installation starts Starts the installation of the device driver J Click i Installation of the device driver is complete After installation is complete click m to restart the PC ELECOM Mouselisis
17. ow so that the vertical and horizontal scrollbars appear The sample website used here is the ELECOM homepage 3 Scroll the tilt wheel bark and forth and move it from side to side ort bece Porn Ed The mouse is operating al if the screen moves up and down or from side to side as you scroll or move the tilt wheel e In applications that do not support scrolling the screen will not move when you scroll the tilt wheel e In order to use this product s button allocation function with a Mac you must download and install ELECOM MouseAssistant 2 for Mac OS X from our company s web site Proceed to Using the horizontal scrolling and button allocation functions on the reverse of this sheet Using the horizontal scrolling and button allocation functions To use the horizontal scrolling function with the tilt wheel of this product you need to install the ELECOM MouseAssistant 2 that can be downloaded from the ELECOM website Obtaining ELECOM MouseAssistant 2 Access the ELECOM website using the following URL and download the latest driver http www elecom co jp global download utility mouse_assistant Installing the ELECOM MouseAssistant 2 for Windows Y Before installation e Keep the mouse installed For details see Step 2 Installing the Receiver Unit on the front of this sheet e If mouse utility software from ELECOM or another company is installed uninsta
18. process ELECOM CO LTD 1 1 Fushimi machi 4 Chome Chuoku Osaka Japan 541 8765 Bes bs BAIR a HATAREE RK 10657 SIRES BRAB 7045 an 86 21 3368001 1 FAX 86 21 64271706 URL http www elecom china com ELECOM SHANGHAI TRADING CO LTD Rm 704 Feidiao International Bldg 1065 ZhaoJiaBang Rd Shanghai China 200030 TEL 86 21 33680011 FAX 86 21 64271706 URL http www elecom china com Elecom Korea Co Ltd 5F Suam Bldg 1358 17 Seocho2 dong Seocho gu Seoul 137 862 Korea TEL 1588 9514 FAX 02 3472 5533 URL www elecom co kr Basic specifications Product name Wireless Laser Mouse Article No M SODL Series OS Windows 7 Windows Vista up to SP2 Windows XP SP2 to SP3 Mac OS X 10 5 to 10 5 8 10 6 to 10 6 4 Resolution dpi 800 Interface USB Radio frequency 2 4 GHz bandwidth Radio wave method DS SS modulation Radio wave outreach Non magnetic substance e g wooden desk Approx 7 m Magnetic substance e g metal desk Approx 3 m Test values in the ELECOM environment Mouse body dimensions 65 7 W x 88 3 D x 40 2 H mm Receiver unit dimensions 15 0 W x 29 3 D x 7 0 H mm Operating temperature 5 to 40 C 90 RH max no condensation humidity Storing temperature 10 to 60 C 90 RH max no condensation humidity Batteries AAA alkaline battery AAA manganese battery AAA nickel hydride battery Operating time Mea
19. receiver unit e If you feel strong resistance when inserting the receiver unit check that the shape and orientation of the connector is correct Using excessive force may damage the connector and cause injury e Donot touch the USB connector terminals 3 The mouse driver is installed automatically When using Mac OS X Step Check USB ports Check the USB iil on your computer USB port o e Any USB port may be used e This product can be connected to a USB hub However it may not work depending on the power supply capability of the USB hub Step2 Installing the Receiver Unit 7 Activate the Macintosh e Wait until Mac OS X has started up completely 2 Insert the receiver unit into a USB port on your Macintosh Insert here _ JAS Receiver XS Y e Carefully check the orientation of the connector and the place where you will connect the receiver unit e If you feel strong resistance when inserting the receiver unit check that the shape and orientation of the connector is correct Using excessive force may damage the connector and cause injury e Donot touch the USB connector terminals USB port 3 The mouse driver is installed automatically Step Checking wheel operation Check that the vertical and horizontal scrolling functions are working correctly in Safari Step Checking wheel operation Check that the mouse scrolls up and down correctly
20. sure of the operating time when an AAA alkaline battery is used Continuous operating time Approx 60 hours Continuous standby time Approx 125 days Estimated serviceable time Approx 28 days when the PC is operated for eight hours a day and 25 of the PC operation is assigned to mouse operation so FAEH 2S 5 Alt XK BS Il saea o JIE NASSeS ANWASSSS TIVILA FHUSA SE 2E ULAN ASS USuc EIR EEA PE Fe By PAR AUS ith SZ ERR SS gt FERRET AY ZR gt AKE JATE A ERR gt AR E RELE TERA HE a PPR KARA Se BZA Ma RE REA gt KARA THERE gt EISH gt fcc FE 7 EE EH HAGE gt TA ETRA EDINA PEERKE L FIE SLE ESRC AR FELIS TA BCLS BYE Be ae Fd EEA Wireless Laser Mouse M SODL Series User s Manual 1st edition August 31 2009 ELECOM Co Ltd This manual is copyright of ELECOM Co Ltd Unauthorised copying and or reproducing of all or part of this manual is prohibited The specifications and appearance of this product may be changed without prior notice for product improvement purposes ELECOM Co Ltd sh
21. t of this sheet Uninstalling ELECOM MouseAssistant 2 for Windows To reinstall ELECOM MouseAssistant 2 for Windows uninstall the existing version of ELECOM MouseAssistant 2 first O e Login with a user account that has administrative privileges e It is recommended that all Windows programs application software be terminated 7 From the Start menu select Control Panel The Control Panel appears 2 Do one of the following e Windows 7 and Windows Vista Under Programs click Uninstall a program Programs Ka Coan Change startup programs e Windows XP Click Add or Remove Programs Add or Remove Programs 3 Select ELECOM Mouse Assistant 2 from the list of installed programs and then click Uninstall Windows 7 Windows Vista or Windows XP Q When the User re x y Windows needs your permission to continue Account Control gt lt a you started this actior inue screenisdisplayedin amp Windows Vista click o y the Continue User Account Control helps stop unauthorized changes to your coi mputer Troubleshooting Though the subsequent screens of the uninstallation program differ depending on the OS the procedure is the same 4 click The uninstallation begins When the software is uninstalled click R D and then restart the PC ELECOM MouseAssistant2 InstallShield Wizard ELECOM
22. taller is activated D gt Click Continue AN Install ELECOM Mouse Assistant 2 Mac version This package will run a program to n Installer v determine if the software can be installed re Introduct cm jou re not sure about this software i ance e pre inistrative tallatio alas a ayis installed Uninstall the Software before installing this software To finish installation click Installer next to the Apple mark on the upper left of the screen and select Finish installer If MouseAssistant has been installed click Cancel Jand uninstall gt 4 Click Continue AOO Install ELECOM Mouse Assistant 2 Mac version Welcome to the ELECOM Mouse Assistant 2 Mac version Installer Introduction Precaution Log onto the web with a user account that has administrative privileges If the mouse utilities software for a different company is installed uninstall the software before installing this software To finish installation click Installer next to the Apple mark on the upper left of the screen and select Finish installer 5 Click Install ANDO Install ELECOM Mouse Assistant 2 Mac version Standard Install on Macintosh HD Introduction Destination Select This will take 3 6 MB of space on your computer Installation Type Click Install to perform a standard installation of areas this software on the disk Macintosh HD _ Ch
23. tant2 InstallShield Wizard sistant normally Before using this Now the installation of the ELECOM MouseAssistant 2 for Windows is complete NA e After restart mouse functions can be set Right click the 5 icon in the task tray or notification area and select Properties Ifthe ico is displayed in the Notification Area in Windows 7 click it and then right click the 5 icon and then click the Properties For the setting method see the Help file Installing the ELECOM MouseAssistant 2 for Macintosh D Before installation e Keep the mouse installed For details see Step 2 Installing the Receiver Unit on the front of this sheet e If mouse utility software from ELECOM or another company is installed uninstall it e Login with a user account that has administrative privileges e It is recommended that all programs application software be terminated 1 Double click the downloaded a ELECOM_Mouse_Installer_ a ELECOM_Mouse_insta X X X X dmg The disk image is mounted on the desktop and a window is displayed The file name may be different depending on the version of the driver 2 Double click the ELECOM_Mouse_Installer_ x x x x that has been displayed aoe ELECOM_Mouse_Installer_x x x x lal Im Lo z a il B DEVICES I Macintosh HD B iDisk Meu gt SEARCH FOR x 1 of 1 selected 1 1 MB available The ins
Download Pdf Manuals
Related Search