Home

GSM SAFE 3

image

Contents

1. the microcontroller e This latest version turns on automatically when a telephone is put inside and automatically turns off when the handset is taken out e Indication of detected communication protocol by the color of the LED e Produced as an attractive wooden desktop stand e A new more sensitive scheme of detection with pre selectors provides a better detection distance e Long battery life of up to 10 15 days when used moderately e Does not block the mobile network in the area e Has no adverse effect on health no electromagnetic waves e Compatible with virtually all types of GSM telephones max width 7 cm practically any height and thickness e Built in diode for indication of the active mode and kind of the detected protocol The GSM SAFE 3 has been created as an attractive desktop stand to protect your conversations in case your mobile phone has been modified changed or has pre installed spyware software Its features include a built in radio frequency detector a controlling scheme and a noise generator which can turn on when the phone is active The GSM SAFE 3 automatically turns on when there is a telephone inside it Normal calls can be answered in the usual way since you will hear the telephone s melody or vibration and simply remove it from the stand Hidden spy activations do not produce any sound or vibration and this is where the GSM SAFE 3 will warn and protect you In the event of a spy activation the GS
2. GSM SAFE 3 Protection against spy phones User Manual Introduction Modern communications give varied possibilities of information exchange At the same time these devices can become a dangerous tool for picking up information illegally A reprogramming of your mobile phone installing spyware in it the substitution of it or being given a modified telephone will all give other people access to the data in your handset or the ability to listen to all conversations around you from anywhere in the world Such illegal actions can be accomplished without any signs on the display being shown or sound signals being heard The GSM SAFE 3 has been designed to detect the illegal activation of a mobile phone In addition to this main function the GSM SAFE 3 also creates interference to the surrounding area of the telephone s microphone by generating white noise when radio waves are detected this noise suppresses the microphone in the telephone rendering it useless GSM SAFE 3 is an updated version of its predecessors and has the following distinctive features e 2 working modes 1 DETECT warns you with the help of the LED when the telephone starts an exchange of information 2 NOISE in addition to warning the GSM SAFE 3 will produce audio interference which suppresses the telephone s microphone e Accurate and sensitive detection of GSM 900 1800 CDMA850 WCDMA2100 3G UMTS and Bluetooth by an intelligent algorithm of
3. M SAFE 3 will alert you with the help of its LED and can automatically turn on its noise generator NOISE mode so the listener will hear this sound only Design Attractive desktop stand 3 colors available Made of natural wood with an internal velour cover Power 2x AAA Working time mixed mode 5 15 days Current consumption stand 2mA 25mA by active Use Use a screw driver to open the screws of the battery compartment on the bottom of the GSM SAFE 3 Use 2 new alkaline AAA batteries to achieve the best working time After installing the batteries the device is ready for use Replace the cover Select the working mode using the button on the bottom of the GSM SAFE 3 1 DETECT In this mode the GSM SAFE 3 warns you with the help of the LED when the telephone starts an exchange of information The button is not depressed 2 NOISE in addition to warning the GSM SAFE 3 will produce audio interference which will suppress the telephone s microphone The button should be pressed in Put your telephone inside the GSM SAFE 3 The device will automatically turn on after the telephone is placed inside The normal working status will be confirmed by the diode flashing green every two seconds To ensure that the GSM SAFE 3 is working properly make a call from you telephone and put it inside the GSM SAFE 3 The diode should turn on and stay in this state longer than just blinking green Depending on th
4. e type of signal detected the diode will light up in a different color Type of protocol LED color CDMA850 Green GSM Red 3G UMTS Orange Bluetooth Blue In the NOISE mode the built in generator will produce noise simultaneously with the illumination of the LED When the battery is low the LED will stay red without blinking Please note e The color of the LED is selected by the microcontroller as a result of the analysis of the demodulated signal In our modern high tech environment there may be some simultaneous signals detected by the GSM SAFE 3 As a result the color may vary e External powerful signals like ones sent out from Wi Fi hotspots may give alarms on the GSM SAFE 3 as its sensitivity is tuned to catch the weakest signals going from the telephone e Since the telephone knows its distance to the base station and adjusts its transmitter s power to the lowest possible in order to save the battery the sensitivity of the GSM SAFE 3 is tuned to feel the weakest signals When the base station is further the telephone increases its power from the telephone This may result in false detections caused by other phones situated around the GSM SAFE 3 when the distance to base station is high

Download Pdf Manuals

image

Related Search

Related Contents

Cornelius CCM522 User's Manual  If you use SV814P or SV614P, click here to  取扱説明書(2.3 MB)  Pentax Optio RZ10  Notice Resist - Laboratoire Tilman  SECTOR (CBM-CFS3) USER'S GUIDE  Roth MA AuraModul Ex 12 kW  

Copyright © All rights reserved.
Failed to retrieve file