Home

DVR Server Operations Manual

Contents

1. lt Input Formatted Table Ste D D 5 U a O 3 ue Z O x D O lt D D Outputs Call Monitor BNC x 1 1 0Vp p 75 ohm 800 x 600 1024 x 768 1280 x 1024 pixels 60 Hz Optional NTSC 30 PPS Per channel PAL 25 PPS Per channel Optional icture Refresh Rate U lt G gt S TD Terminal Block x4 Line in Terminal Block x8 Line in Terminal Block x16 Line in Supported RCA x 1 1 Channel Line Out nput 3 U Formatted Table Main out Call Audio RCA x 1 1 Channel Line Out Proprietar Output 8 KB s per channel UIO DJO 9 3 sol lo O gt lt D I Q JJ D Q Li Si 5 G H 264 MJPEG ing Mode Schedule Alarm Motion Detection re Alarm Yes NTSC 720 x 480 Max 30 fps Max 60 fps 1 Formatted Font 10 pt Ee Ss Se Se 518 OI O D OD O Q 720 x 240 Max 60 fps Max 120 fps 360 x 240 Max 120 fps Max 240 fos PAL 720 x 576 Max 25 fps Max 50 fps 720 x 288 Max 50 fps Max 100 fps 0 x 288 Max 100 fps Max 200 fps 8 Levels Presets Adjustable 1KB to 20KB Picture Linear Circular Yes Programmable Formatted Font 10 pt Formatted Font 10 pt Formatted Font 10 pt Formatted Font 10 pt mage Size Formatted Font 10 pt torage Mode NON Formatted Font 10 pt UINISF I D O C Q O 5 Q 5 D 8 OD Formatted Font 10 pt O
2. Level 1 Aligned at 0 Tab after e In the Security Level area click lt Custom Level gt The Security Settings 0 29 Indent at 0 24 screen is displayed security Settings Settings T y Activex controls and plug ins d Automatic prompting for ActiveX controls Disable Enable wl Binary and script behaviors Administrator approved Disable Enable wl Download signed ActiveX controls Disable Enable Prompt wl Download unsigned ActiveX controls PN e t Reset custom settings Reset to Low e Under lt ActiveX controls and plug ins gt set all items to lt Enable gt or Formatted Indent Left 6 ch Bulleted Level 1 Aligned at 0 Tab after lt Prompt gt 0 29 Indent at 0 24 e Click lt OK gt to apply the setting and close the lt Security Settings gt screen e Click lt OK gt to close Internet Options dialog Now the installation can continue to the next step 44 DVR User s Manual 5 2 2 Installing Remote Monitoring Software Start the browser to initiate the installation of the remote monitoring software on the PC The IP address of the DVR can be saved as a Favorites item in the web browser to enable easy access in the future e Start the IE it can be started either by clicking on the desktop icon or by Formatted Indent Left 6 ch Bulleted Level 1 Aligned at 0 Tab after using the Start menu to access it 0 29
3. DVR User s Manual 67
4. SEQ Sequence Press to start automatic sequencing of the video coming from the installed cameras MENU Press this key to enter the OSD setup menu SEARCH In both Playback and Live mode users can press SEARCH to call the Search menu for searching and playing back recorded video by date and time or events DVR User s Manual 14 3 2 DVR User s Manual Power Up Down the Unit If the DVR must be shutdown for any reason please use the proper shut down and power up procedures to avoid damaging the DVR To Power Up the Unit Simply plug in the power adapter that came with the package and the DVR will start to boot The color bar and system checking information will be shown on the monitor and then disappear when the unit has been completely powered up To Restart Shutdown the Unit Press MENU and input the administrator password to access the OSD setup menu Select lt Shutdown gt in Main Menu and press ENTER to enter the Shutdown menu which displays as follows Shutdown 4 Power Off Execute 2 Reboot Execute lt Power Off gt Select this item to shut down the unit Do not remove the power during shut down until the message You can safely turn off DVR now displays lt Reboot gt Select this item to reboot the unit The color bar and system checking information are displayed on the monitor until the unit is completely restarted Entering OSD Setup Menu The configuration of the DVR c
5. 1 08 Save Time amp Space Easy to install and it takes less space than coaxial cable 2 Cost Down on Camera Power Adapter There is no need to buy adapter for each UTP Color Box Camera because the power is directly supplied from the DVR unit The Optiview H 264 DVR provides the option to connect UTP cameras Follow the steps below to complete the UTP camera installation Step 1 Connect the DVR and the UTP Camera via the UTP cable CAT5 NOTE The DVR should be powered OFF before the installation of the UTP Camera Step 2 On the back panel of the DVR switch the video source to ON UTP For instance if a UTP Camera will be installed to channel 1 switch the video source 1 to ON The correct setting is shown as below 1234 UTP BNC 58 Formatted Table Formatted Indent Left 0 First line 0 Bulleted Level 1 Aligned at 0 Tab after 0 33 Indent at 0 33 Tab stops Not at 0 5 DVR User s Manual Video Source Selection Follow the same procedure if more UTP Cameras to CH2 CH3 or CH4 will be installed NOTE Do NOT insert both BNC and UTP video sources to the same A channel simultaneously or the video will not function correctly and it may cause the video to look like the figure below For instance if a UTP Camera is already installed to channel 1 do not install another camera to the BNC port of channel 1 Bad Video Output Step 3 Plug in the power adapter to the DV
6. Indent at 0 24 e Enter the IP address of the DVR in the address bar at the top of the browser e The ActiveX controls and plug ins dialog will show twice for confirmation click lt Yes gt to accept ActiveX plug ins The remote monitoring software plug ins will be downloaded and installed on the PC automatically when the connection is successfully made A NOTE Do not enter any leading 0 characters in the address for example 192 068 080 006 should be entered as 192 68 80 6 If the default trigger port 80 is changed into another one take port 81 for example the IP address should be entered as 192 68 80 6 81 Internet Explorer 9 Do you want to allow software such as Active controls and plug ins to run Formatted Indent Left 6 ch Bulleted e A version check starts to verify whether the remote monitoring software Level 1 Aligned at 0 Tab after was installed already and also check if the version is the same as that 0 29 Indent at 0 24 stored in that particular DVR This process may take up to 30 seconds e When the software is completely downloaded and installed the Login Screen is now displayed Enter Network Password This secure Web Site at 192 168 7 184 requires you to log on Please type the User Name and Password that you use for DVR User Name sl Password E M Save this password in your password list e 45 DVR
7. grayed out and cannot be accessed NOTE If this function is enabled the date time information will be A shown on the screen with a DST icon when playing back recorded video or searching video in the event list S indicates summer time and W indicates wintertime DST Start End The items are used to program the daylight saving duration Use LEFT RIGHT keys to move the cursor to the next or previous field UP DOWN to change the settings in the selected field DST Bias The item allows users to set the amount of time to move forward from the standard time for daylight saving time The available options are in minutes DVR User s Manual 3 9 3 5 1 IP Camera Setting The distinctive hybrid solution of the DVR enables users to connect IP camera s while others are analog cameras First enter the OSD setup menu with the administrator password and access lt System Setup gt gt lt IP Camera Support gt to select the number of IP cameras to be connected The supported channels of IP cameras will be from the largest numbers for example CH16 for 16ch models ji NOTE The DVR must be rebooted in order to apply the change of IP Camera Support option To configure setting of an IP camera access lt Camera Setup gt and select the channel with the largest number The menu will be shown as follows IP Camera IP Camera Select IP Camera Title Hostname IP Model Connection Setup Device Setup Activated
8. 5W If the power consumption of the camera is higher than 5 5W do NOT connect it to the UTP Converter DVR User s Manual Appendix D Recommended HDDs Refer to the following list for some recommended HDDs to be used in the DVR Model Name Model Number Size Barracuda ES 2 ST3500320NS 500G Barracuda 7200 11 ST3500320AS 500G Seagate Barracuda 7200 11 ST3750330AS 750G Barracuda 7200 11 ST31000340AS 1000G DeskStar HDP725032GLA360 320G HITACHI Maxtor DiamondMax22 STMGS00320AS so 61 DVR User s Manual Appendix E Remote Controller The operational function keys on the left and dome camera control keys on the right on the remote control are listed as below figure MODE DOME CALL PLAY STOP 62 Multiple Channel DVR DVR Selection CHANNEL Keys ZOOM ENTER DIRECTION BUTTONS ESC MENU SEQ SEARCH FREEZE SET GO PRESET TOGGLE HINT SCREEN ENTER AUTO PAN TILT ESC ZOOM IN FOCUS NEAR ZOOM OUT FOCUS FAR IRIS OPEN ENTER DOME MODE IRIS CLOSE Multiple Channel DVR Formatted Font Default Arial DVR User s Manual DVR Control Mode DVR Select CHANNEL Keys CALL COPY eem DOME SEQ MODE SEARCH DIRECTION ZOOM RENS ENTER PLAY STOP i MENU Multiple Channel DVR FREEZE Dome Camera Control Mode TOGGLE HINT SCREEN SET GO PRESET Enter Dome Camera Control Mode ESC i FOCUS NEAR IRIS OPEN ZOOM OUT PAN TILT ENTER AUTO IRIS
9. 6 Calling Preset Points 41 5 Remote Monitoring STINE seven 42 5 1 Remote Monitoring System Requirements rrrrrrnnnnrrrnnnnnnnrvnvrnnnnrrnvrnnnnrrnnnnnnner 42 52 Getting Start of Installation E 43 521 Changing Internet Settings E 43 5 2 2 Installing Remote Monitoring Software 45 GE ee ne a 46 5 2 2 2 Software Upgrades 47 5 3 Basic Operation for Monitoring Remotely AAA 47 5 3 1 MO View Live Video EE 48 5 3 1 1 Selecting Display Mode rrrrnnrrrnnnnnnnnvnvrrnnnnnrnnvnnnrrnnnnnnnrennnnnnn 48 5 3 1 2 Operating Cameras with Dome Control 49 EE OO cree eer eer ne EN 50 5 3 2 1 Recording Video ln EE 50 5 3 2 2 To Playback Instant Recorded Video 50 5 3 3 To Playback VIE 2 siennes eine 51 5 3 3 1 Playing Back Remote Video 51 5 3 3 2 To Playback Local drv FRS denger ege 52 Do Playback GN 53 534 Search from Evert Le EE 54 539 e EE 55 5 3 6 Remote Monitoring Software Trouble Shooting Guide 56 Appendix A Technical Specifications aannnxxnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnennnnnnnnnnnnennr 57 Appendix B Connect UTP Camera nnnnnnnnnnnnnnnnnnnnnnnnnnnnnennnnnnnnnnnnnennnnnnnnnnnnnennnnnnnnnnnnnen 58 DVR User s Manual Appendix C Connect Analog Camera via UTP Converter sise 60 Appendix D Recommended HDDS semence 61 Appendix E IP Camera Installation Error Bookmark not defined Appendix F Remote C
10. Remote User LAN IP 192 168 0 1 192 168 0 101 See the router manufacturer s websites for more instructions on port mapping 65 DVR User s Manual Following is an example of how the router should be set Router PC DVR 1 DVR 2 D Link DI 724P IP 192 168 0 100 IP 192 168 0 167 IP 192 168 0 200 WAN IP 218 160 54 13 Trigger port 80 Trigger port 81 LAN IP 192 168 0 1 To change the setting of the router a PC with web browser is required Connect to D Link DI 724P from PC via IE The setup screen will be shown after entering the correct username and password 4 D Link DI 724P Web Configuration Microsoft Internet Explorer DERK File Edit View Favorites Tools Help ay Q Bac Ei EN Le Ka Search Se Favorites Gr 3 Address htp 192 168 0 1 D Links A 2 D Link AirPlus G High Speed 2 4GHz Wireless Router Advanced Tools Status Help DI 724P Setup Wizard The DI 724P is an Ethernet Wireless Router ideal for home networking and small business networking The setup wizard will guide you to configure the DI 724P to connect to your ISP Internet Service Provider The DI 724P s easy setup will allow you to have Internet access within minutes Please follow the setup wizard step by step to configure the DI 724P go Wireless WAN LAN Click the lt Advanced gt tab and follow the steps to set up web port forward to DVR 1 E sir Plus G High Speed 2 4GHz Wireless Router To
11. Router This appendix describes how to set up a router if the DVR connects to the internet via a router To properly operate a web server e g a DVR users have to set up both the IP and port of the DVR which are essential for data and command transmission The port setting Is adjustable in OSD setup menu of the DVR and only one port is needed to do remote operation Typically and by the default the DVR operates on port 80 which is well known as the http port Please make sure that port 80 is not blocked by the ISP Otherwise a different available port shall be reset and the setting of the DVR shall be changed SSS a E Internet Ge DVR 1 192 168 0 10 Remote User In case a router or sometimes a DSL modem is in place the real IP is now assigned to the router instead of the DVR The DVR is located behind the wall router and operates on virtual IP In most cases virtual IP starts with 192 168 x x The router has two IP one is real IP WAN IP the other is virtual IP LAN IP The virtual IP would be 192 168 x 1 When the remote users want to operate the DVR they will have to send command to the real IP i e the router Then the router has to map forward the command to the DVR Thus it is required to set up the router for port mapping forwarding before images from the DVR can be remotely viewed on a PC ee DVR 1 192 168 0 167 DVR 2 8 192 168 0 200 internet Router PC WAN IP 218 160 54 13
12. User s Manual 5 2 2 1 Login Logout Login using either lt Admin gt or lt User gt account lt Admin gt account can modify configuration without restraint while lt User gt account is limited to general remote access of the unit One Admin and up to two Users can access a DVR at the same time Nevertheless if the Admin account is currently accessing the unit s OSD setup menu at the DVR site then the Admin account at the remote monitoring site cannot change the settings at the same time The Admin account of the DVR has priority Enter Network Password This secure Web Site Lat 192 168 7 184 requires you to log on Please type the User Name and Password that you use for DVR EE UserName W v Password 77 M Save this password in your password list Cancel The following steps demonstrate procedures to view video from remote unit e Start the remote monitoring software by entering the IP Address of the Formatted Indent Left 6 ch Bulleted Level 1 Aligned at 0 Tab after DVR in the Address bar of the browser Alternatively click on the Favorite 0 29 Indent at 0 24 entry for the unit if the IP address of the unit has been set e Enter the Username and password The login username and password can be saved to ease future login The default usernames and passwords are listed as below ec ee Login Type Default Username Default Password 1234 4321 e Cli
13. allows users to export wanted video to the built in DVD RW or an external device such as a USB ThumbDrive and the exported video will be saved as drv file If the video is to be exported to an external device make sure the device is connected to the DVR unit and the port has been set appropriately for video export A NOTE Once an external device is connected to the DVR unit the device has priority over the built in DVD RW which means that the wanted video will be exported to the external device instead of the built in DVD RW According to the size of video the export may take about 10 minutes to 1 hour DVR User s Manual 4 4 1 ezBurn Introduction Built with the ezBurn technology ezBurn function provides users the easier way to export desired video with built in DVD RW or to an external device such as an USB ThumbDrive TWO keys SEARCH and COPY and THREE touches are all what s needed for completing the export The entire exporting process will be done through the front panel without needing to enter the OSD setup menu The ezBurn exporting process is illustrated as below figure Press SEARCH key Press COPY key Press COPY key Start playing back video ezBurn start time ezBurn end time The entire process is described step by step in the following sections A NOTE The file exported using ezBurn will be in drv file format and it can only be played using the remote player software 4 4 2 To Export Normal V
14. amp Call Audio Out RCA connectors are provided for connecting the DVR to audio output devices e g amplified speakers Main will output audio from the main monitor whereas Call will output audio form the call monitor UTP Input Optional The UTP Input offers additional connectivity using the Unshielded Twisted Pair wiring UTP cable is one of the most common medium in the telecommunication industry For UTP installation information please refer to Appendix B and Appendix C A NOTE UTP cable transmits Video and Power signals to cameras 3 1 3 1 1 DVR User s Manual General System Setup Before operating the DVR some general configuration should be setup first The following subsections will introduce function keys on the front panel and general configuration of the DVR The regular displayed OSD information and its displayed positions are shown as following figure The channel title will be displayed on the top left side of the window either in full screen mode or in multiple channel mode The current operating mode including Call mode Dome Control mode Playback mode Freeze mode and Sequence mode will be displayed on the bottom left side of the screen The date time information will be display on the bottom right side 2008 06 09 PM04 31 22 Front Panel Introduction The front panel controls enable users to control the unit and preset the programmable functions LED Definition The LE
15. camera and 9 camera sequencing view modes Formatted Indent Left 0 Formatted Font Default Arial Font color Red DVR User s Manual lt lt ai K 31 __ Formatted Font Default Arial d Formatted Normal Centered Indent Left Sch Formatted Bullets and Numbering DVR User s Manual 4 2 2 4 3 32 Sequence with Call Monitor Users are allowed to use the DVR front panel to control a call monitor display without having to access the Main menu Two viewing modes can be displayed on call monitor Sequence display and Single camera display To program the call monitor sequence see OSD Menu Setup Guide Section Sequence Setup Follow the steps to control the call monitor e Press the CALL key on the front panel to enter call monitor control mode The message Call Mode will be shown on the bottom left of the screen Press 1 16 Key To Select Channel Press SEQ To Enable Sequence Call Mode e Press CHANNEL key to display the associated camera on call monitor e Alternatively press SEQ repeatedly to display the sequence of cameras previously programmed in Call Monitor Schedule menu e Press ESC to return the front panel to Main monitor control mode Searching Recorded Video The DVR is capable of searching and playing back recorded video by date and time or events Enter the specific date and time of the wanted video the DVR will search for matched video and start
16. same procedures through the 3rd and 4th item respectively Note that lt Weekend Record gt will be inaccessible if lt Weekend Schedule gt in lt Schedule Setup gt is set to lt No gt e Select lt Average Normal PPS gt and press ENTER then press UP DOWN to make a choice The lt How Many Days To Record gt will be computed automatically e Select lt Average Normal Quality gt and press ENTER then press UP DOWN to make a choice The lt How Many Days To Record gt will be computed automatically A NOTE The current number of connected cameras will affect the recording quality automatically calculated through the lt ezRecord Setup gt Therefore once the number of connected cameras is changed the lt ezRecord Setup gt should be reset Circular Recording Users can choose to record video in circular mode or in linear mode If circular mode is selected the DVR will stores new video into the HDD spaces while overwrite the oldest recorded video Alternatively if linear mode is selected the DVR will stop recording when the HDD is full and the internal buzzer will start to beep From the Record Setup menu move the cursor to lt Circular Recording gt and press ENTER then select lt ON gt lt OFF gt using UP DOWN keys DVR User s Manual 3 6 7 Purge Data This item is used to delete the Normal or Event recording video In Record Setup menu move the cursor to lt Purge Data gt and press ENTER the Purge Data menu is d
17. the appliance This symbol intends to alert the user to the presence of unprotected Dangerous Voltage within the product s enclosure that may be strong enough to cause a risk of electric shock DVR User s Manual Important Information Before proceeding please read and observe all instructions and warnings in this manual Retain this manual with the original bill of sale for future reference and if necessary warranty service When unpacking your unit check for missing or damaged items If any item is missing or if damage is evident DO NOT INSTALL OR OPERATE THIS PRODUCT Contact your dealer for assistance Rack Mounting Consult with the supplier or manufacturer of your equipment rack for the proper hardware and procedure of mounting this product in a safe fashion Avoid uneven loading or mechanical instability when rack mounting units Make sure that units are installed to get enough airflow for safe operation The maximum temperature for rack mounted units is 40 C Check product label for power supply requirements to assure that no overloading of supply circuits or over current protection occurs Mains grounding must be reliable and uncompromised by any connections DVR User s Manual Table of Content Te ENG gt NANNA 8 21 EEE EE EEE EE EE eee 8 22 Seed VIDEO FOT EE 8 23 Connecting DEVICES to the Unit 9 2 4 Rear Panel KEIER eh ieeee Eed eege 9 3 General System EE 11 31 Froni Panel introducilo EE 1
18. the screen with a DST icon if the Daylight Saving Time function is enabled S indicates summer time and W indicates winter time Searching by Event Event List allows users to search wanted video by event The Event List is displayed as below figure First Page Date 2008 03 17 2008 03 17 2008 03 16 2008 03 15 2008 03 12 2008 03 12 2008 03 11 2008 03 10 2008 03 08 2008 03 08 2008 03 08 Event List Time 11 26 50 09 53 03 16 14 42 03 45 31 22 27 56 10 09 29 12 18 20 05 16 00 17 11 37 16 29 10 03 22 17 VO ONRON w on 33 DVR User s Manual 4 4 34 The list displays events by date time triggered camera and alarm type As some events are deleted others are displayed The latest recorded event video will be listed on the top Follow these steps to search event video through Event List e Press SEARCH to enter the Search menu e To search event video that has been recorded on a specific camera use LEFT RIGHT to move the cursor and press ENTER to select or de select a Channel e Move the cursor to lt Event List gt and press ENTER to list the event video of the selected channels The Event List displays e To exit the event list press ESC Follow the steps to playback video from Event List e Press and hold UP DOWN to scroll through the Event List e Press ENTER to play back the selected event record e Press PLAY to return to live mode Video Export The unit
19. to playback the video Alternatively users can search for event video by channel as well In live or playback mode press SEARCH to enter the Search menu which is shown as follows Search Search By Time 2008 01 01 2008 05 01 2008 01 01 00 00 00 00 00 00 00 00 00 Playback Search By Event Select Channel CH1 CH2 CH3 CH4 Event List Formatted Font Default Arial Font lt color Black Formatted Normal Justified Indent Left 6 ch Tab stops Not at 1 Formatted Font color Black 4 3 1 4 3 2 Searching by Time Follow the steps to search video by date and time Press SEARCH key to enter the Search menu DVR User s Manual Move the cursor to From Time and press ENTER will start playing recorded video from the specified From Time Move the cursor to End Time and press ENTER will start playing recorded video from the specified End Time Use Direction keys to move the cursor for setting the start time Adjust the date and time values by UP DOWN keys Press ENTER to confirm the settings or ESC to abort Move the cursor to lt Begin Playback gt and press ENTER to start playing back the selected video Either press PLAY again or ESC to return to live video NOTE If there is no available recorded video that matches the A specified time and date the unit starts playback from the next available video A NOTE The date time information will be shown on
20. 0832A Internal 36666 The information items shown in the chart are described as below Device Name This item shows the model name of the HDD Int Ext This item indicates whether the HDD is an internal or external device Total Size This item indicates the total size of the HDD State This item indicates whether the HDD is active or non active Temperature This item indicates the current temperature of the HDD in Celsius degree 55 DVR User s Manual 5 3 7 Remote Monitoring Software Trouble Shooting Guide What happened if the server requests to upgrade the software every time the DVR is connected If the following screen displays repeatedly please follow the steps to delete the temporary internet files Confirm gt An Incompatible version of VideoViewer ocx was detected on your PC 7 Would you like to download the correct version for proper operations Notice You must have Windows Administrator privilege to update successfully Please start your browser again after it closed e Select lt Tools gt from the main menu of the web browser then lt internet lt drar Indent Left 1 01 No bullets or numbering Options gt and then click the lt General gt tab Home page L You can change which page to use for your home page Address about blank Use Default Use Blank Temporary Internet files Pages you view on the Internet are stored in a special folder for quick viewing later Dele
21. 1 TN 11 a de ee 12 da2 PN NNN 15 BODD SN Naar 15 3 4 System Date Time SONG end eenkdne 16 S41 SetDate TIME EE 16 3 4 2 Daylight Saving Tme ss 17 35 EE din e E 18 3 5 1 IP Camera Information EE 18 dog Conneccion Ee E one eee ee 19 E Device E 20 e A EEE E E EEES 20 gt EEG 0 geed 20 3 6 Record Schedule Quality Setting cee cccccccccssseseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeseaas 21 3 61 Sched le SGI EE 21 3 6 2 Preset Record Configuration 22 3 6 3 To Record Event Video MN ae 22 3 6 4 Per Camera forgualbhunuuvsaasersentskeeueunis 22 30o GROCO ee ae ee on in 23 26 6 NN 24 gt SE EEE EE 25 TE Bb NN 26 4 1 Viewing Live Playback Videon 26 41 1 VEVEN 26 DN NN 27 4 1 3 Viewing Live Cameras 27 To Freeze Live e 27 4 1 4 Viewing Recorded Video AA 27 Key Usage in Playback RE det eelere 29 Pause Playback and Single Step Forward cccccsssecceeeesseeeeeeeeseees 29 DVR User s Manual E E ter NN 30 4 2 1 Sequence with Main Monitor 30 4 2 2 Sequence with Call Monttor 32 4 3 Searching Recorded Video 32 1 Sb TWINS eege 33 tae Deaching Dy B N EE 33 E We en EE 34 441 CDN NNN 35 442 10 Export Normal VIGGO iisscitcsccojessscscatieseccseacrsaazilencctssenssacedlacccesszestasedis 35 4 4 3 WO Export Event VID een 36 Geer EGET EEE NE ENE mo 36 451 Dome Comme ee 38 252 Dome Procol Seli EE 38 e E E TEE 38 254 Dome Controlling E 39 255 Seling Preset PONS gre eee eee 40 4 5
22. CLOSE Free enn 4 Multiple Channel DVR FOCUS FAR 63 DVR User s Manual The keys of the remote control function as the keys of the front panel of the DVR The only difference between the remote control and the front panel keys is the DVR SEL key The DVR Selection key is used to switch control between each DVR The remote control can be used to control up to 16 DVRs To setup the remote control the first thing is to assign a unique DVR Unit ID to each DVR Use the front panel of the DVR and follow this path to change the DVR Unit ID lt Main Menu gt gt lt System Setup gt gt lt RS485 Setup gt gt lt Unit ID gt Change the DVR Unit ID to any number between 224 and 239 and exit the menu The ID Table is listed below for reference Remote Control 1 2 3 4 s 6 7 e Remote Control 9 10 11 12 18 14 115 116 After the DVR Unit ID is changed setup the DVR SEL of the remote control Press DVR SEL and then press the Remote Control immediately to select the DVR For example assuming the DVR Unit ID is set to 225 press DVR SEL and then press 2 immediately Now the remote control will only be able to control the specified DVR Press DVR SEL and then press the Remote control to switch between DVRs To exit the single DVR control mode press DVR SEL and then press ESC to do so 64 DVR User s Manual Appendix F Setting up a DVR behind a
23. Ds on the front panel of the DVR are described as follows Power LED The LED lights up when the correct power is connected to the unit 3 Alarm LED Red The LED lights up when an alarm is triggered Network LED Green om The LED lights up when the DVR is connected to a network and blinks when the data is being transferred DC REC LED Red The LED blinks while the DVR is recording 11 DVR User s Manual 3 1 2 Function Keys This section describes the functional keys which are for normal operation on the front panel of the DVR Please refer to the Setup Guide for the graphical illustration of functional keys CHANNEL e In both Live and Playback modes press the CHANNEL key to view the corresponding video in full screen The number of the CHANNEL keys corresponds to the number of cameras supported by the unit e In dome control mode the key 1 is used to access the Set Go preset menu the key 2 is used to hide or display the dome setting parameters Direction Keys e In Zoom mode these keys function as Direction keys e In the OSD setup menu the LEFT RIGHT keys are used to move the cursor to previous or next fields To change the value in the selected field press UP DOWN ENTER ZOOM e In OSD setup menu or selection interface press this key to make the selection or save settings e In live full screen view mode press this key to view a 2x zoom image press it again to exit Z
24. ER is to select and UP DOWN are used to change the value in the selected field NOTE The new date time setting applies to A record new video The date and time of previously recorded video will not be changed NOTE If time settings have to be changed in any A case it is strongly recommended to format the HDDs to avoid database corruption Date Time Display Users are allowed to set the time OSD displays in 1 or 2 rows Use the UP DOWN keys to change the setting DVR User s Manual Date Display Mode This function allows users to set the OSD display type of the date There are three options to select from lt Y M D gt lt M D Y gt or lt D M Y gt Y represents Year M represents Month and D represents Day Move to the item and press ENTER the option starts blinking Use UP DOWN keys to change the setting Time Display Mode Users can set the time format to lt 12 hour gt or lt 24 hour gt Use the UP DOWN keys to change the format Date Time Order The item is used to set the order of date time display to lt Date First gt or lt Time First gt Use UP DOWN keys to change the setting 3 4 2 Daylight Saving Time Daylight Saving Time The item is for those people who live in certain regions to observe Daylight Saving Time Select lt ON gt to enable or lt OFF gt to disable the function If the function is disabled the DST Start End time and DST Bias will be
25. No Use UP DOWN keys to select the desired preset number from the menu Set the lt Go Preset gt of the selected preset number to lt Yes gt and press ENTER to call the preset point Now the selected dome camera rotates to the preset position automatically 41 DVR User s Manual 5 Remote Monitoring Software The remote monitoring software is a remote browser based software application designed to operate with the DVR products Using the software users are allowed to view live and recorded video and configure the DVRs remotely via a LAN WAN or Internet on a personal computer The connected PC will automatically download the remote monitoring software plug ins from the DVR when the DVR is connected by entering its IP address in the address bar on the browser Due to the setting items are similar to those listed in the DVR s OSD setup menu please refer to the sections above for setting configuration of the remote monitoring software The tasks can be performed with the remote monitoring software are listed below e Remote viewing of live recorded video lt Formatted Indent Left 6 ch Bulleted Level 1 Aligned at 0 Tab after e Remote setup of the DVR 0 29 Indent at 0 24 e Remote control of dome cameras e Alarm notification from the DVR e Up to three connections to one DVR using the remote monitoring software including one Administrator and two User operators 5 1 Remote Monitoring System R
26. ODEMIEW H 264 DVR System User s Manual ODEIVIEW H 264 DVR system DVR User s Manual DVR User s Manual Caution and Preventive Tips e Handle with care do not drop the unit e Mount the unit in an equipment rack or place it on a solid stable surface e Indoor use only Do not place the unit in a humid dusty oily or smoky site e Donot place it in an area with poor ventilation or in an area close to fire or other sources of heat Doing so may damage the unit as well as cause fire or an electric shock e When cleaning is necessary shut down the system and unplug the unit from the outlet before uncovering the top cover Do not use liquid cleaners or aerosol cleaners Use only a damp cloth for cleaning e Always shut down the system prior connecting or disconnecting accessories with the exception of USB devices e Lithium battery Danger of explosion if battery is incorrectly replaced Replace with the same or equivalent type of batteries recommended by the manufacturer Dispose used batteries according to the battery manufacturer s instructions CE FE _ CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSIONNEL This symbol intends to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying
27. R and the DVR will start to boot The installation is complete A NOTE The UTP Board provides power up to 5 5W If the power consumption of the camera is more than 5 5W the UTP Board will start beeping AN NOTE The length of each UTP cable should NOT exceed 300 meters or 984 feet or it may cause loss or weakening of signal The following table shows performance at different distances Distance UTP Converter Video Quality Meters Feet Power Output W 5 526 Excellent 100 328 5 256 Excellent 99 DVR User s Manual Appendix C Connect Analog Camera via UTP 60 Converter Introduction build a connection between an UTP DVR and a traditional analog camera which allows the transmission of power and video signal through one CAT5 cable The UTP converter has two cables at one end one cable for connecting with the camera s BNC video connector the other for connecting with power jack of the camera A RJ 45 connector is positioned at the other end of the converter Connect the UTP converter and the UTP DVR using a CAT5 cable Installation To build up an UTP connection using the UTP converter connect the BNC and power connectors to camera respectively and connect with the DVR using an Ethernet CAT5 cable BNC Connector DC 12V Jack Zei The UTP converter is made especially for users who want to Connector XY E RJ 45 Connector AN NOTE The UTP Converter can provide power up to 5
28. Status 1 2 3 4 5 6 7 8 NOTE If the IP camera is already activated menu A items 3 to 5 will be grayed out and cannot be accessed IP Camera Information IP Camera Title Access this item to enter the name of the IP camera to be shown on the monitor Hostname IP Access this item to enter the hostname or IP address of the IP camera for example 192 168 1 123 Model Access this item to select the model of the connected IP camera Formatted Font Default Arial Bold 3 5 2 DVR User s Manual Connection Setup Enter lt Connection Setup gt to configure the connection and data transmission setting of the connected IP Camera The menu will be shown as below Connection Setup KKK 1 Account 2 Password 3 Management Port 80 4 Streaming Port 8090 5 Streaming Format MPEG4 6 Streaming Protocol RTP RTSP KKK Account Password Access these two items to enter a valid account name and password of the connected IP camera Management Port Access this item to enter the default port of the IP camera Streaming Port Access this item to enter the streaming port for transmitting video and related commands of the IP camera Streaming Format Access this item to select the streaming format lt MPEG4 gt or lt MJPEG gt of the IP camera Streaming Protocol Access this item to select the streaming protocol of the IP camera The option includes lt RTP RTSP gt lt RTP RTSP gt l
29. an be customized by entering the intuitive Graphical User Interface GUI OSD setup menu Collaborating with a USB mouse setting up the DVR can be easy as operating on a PC Press MENU and enter Administrator or User password to enter the OSD setup menu The Password Verification screen displays as follows Password Verification Press Channel Keys To Enter Password 4 8 Digits Press lt Key To Delete DVR User s Manual 3 4 3 4 1 The default passwords are shown in the following table The same passwords are used for entering the remote viewing software Administrator Password User Password NOTE It is strongly suggested to change the A passwords to prevent unauthorized access to the unit System Date Time Setting Users can set the current date time and other OSD parameters in Date Time menu under System Setup Menu The administrators privileges are required for entering the submenu In OSD setup menu select lt System Setup gt and press ENTER then select lt Date Time gt to access the Date Time menu the menu displays as follows Date Time 1 Date 2008 02 21 2 Time PM10 39 26 3 Date Time Display 1 Row 4 Date Display Mode Y M D 5 Time Display Mode 12 HR 6 Date Time Order Date First 7 Daylight Saving Time Setup Set Date Time Set Date Time Select lt Date gt lt Time gt and press ENTER to adjust the settings LEFT RIGHT keys are used to move the cursor to previous or next field ENT
30. are is completely downloaded and installed the Login Screen will be displayed 5 3 Basic Operation for Monitoring Remotely When a DVR is successfully connected the main window of the Central monitoring software will display as shown below The connected cameras of the DVR will be listed on the left and an array of camera output windows will display on the right of the main window 567891011 12 13 14 1 Le 4 3 dai a D re LIVE PLAY MENU SEARCH suarsmor HEALTH 47 DVR User s Manual Refer to the following table for brief description of functional items Item Description Item Description leet Recording Capture Snapshot 2 JAucio oo D l Viewing Aspect 8 select Camera 14 HDD Status a ospaymode 4B Payback Corro SES um KS Cia SS 5 DEN Playback Video Select Bandwidth Speed 7 Setup Menu Download DVRPlayer The functions on the remote monitoring software will be described in the following sections se 4 To View Live Video View live video from the cameras attached to the DVR by clicking lt Live gt Formatted Left Och button on the main window toolbar Choose desired display mode full screen 2x2 windows 3x3 windows and 4x4 windows after the live images of the DVR are displayed on the main window When a dome camera is connected and viewed in single channel full screen mode the dome camera control operation can be accessed To choose desired di
31. ck lt OK gt to login to the DVR The process may take a few seconds Formatted Indent Left 6 ch Bulleted Level 1 Aligned at 0 Tab after e If the connection is made successfully the main window will display live 0 29 Indent at 0 24 video of the attached cameras If the IE browser is closed the remote system is logout and disconnected from the DVR at the same time 46 DVR User s Manual 5 2 2 2 Software Upgrades If a new version of the remote monitoring software is available on the DVR upgrade will be prompted while accessing the unit Follow the steps to upgrade the software Confirm gt An Incompatible version of VideoViewer ocx was detected on your PC S J Would you like to download the correct version for proper operations Notice You must have Windows Administrator privilege to update successfully Please start your browser again after it closed Formatted Indent Left 6 ch Bulleted Level 1 Aligned at 0 Tab after e The message as the above figure will be prompted Click lt Yes gt to accept version upgrade 0 29 Indent at 0 24 e Start the IE again and enter the IP address of the DVR in the Address bar Formatted Indent Left 6 ch Bulleted l Level 1 Aligned at 0 Tab after of the browser or if the unit address is set as a Favorite site click the 0 29 Indent at 0 24 Favorites entry for the unit e When the softw
32. ctor Main Monitor BNC VGA BNC and VGA output connectors are offered for connecting to a main monitor The main monitor displays live image and playback recorded video in either full screen or split window format VGA output connector is optional ar Call Monitor The call monitor is used to display full screen video of all installed cameras in sequence The BNC call monitor connector allows users to connect the DVR with an optional call monitor Video Input group of BNC connectors is offered for video input streams from installed cameras The number of Ge Ge connectors is equal to the number of channels DVR User s Manual Alarm UO amp RS485 amp Audio In Terminal block connectors are provided to offer users the flexibility to connect the DVR to Alarm I O RS 485 and Audio In devices The definition of pins varies for different models Refer to Setup Guide for detailed pin definitions LAN Connector RJ 45 The DVR is capable of networking Once the unit is connected to the LAN network users can remotely access the unit through the remote software on a PC USB Connector x3 There are three USB 2 0 ports 2 at rear 1 at front to allow users to connect external USB devices to the unit such as a USB ThumbDrive or a USB mouse Power Jack The DVR has a free voltage DC power connection jack Please connect the power adapter shipped with the unit Audio Out Main amp Call Main
33. d Setup menu Please note that the total normal PPS for all channels cannot exceed 60 NTSC 720x240 60PPS 50 PAL 720x288 50PPS To increase one channel s PPS others may have to be reduced first Event PPS is not restricted to this rule since a smart event scheduler will handle the total PPS with a correct weighting 3 6 5 ezRecord Setup This item aims to ease the complicated record settings and to make the setup much easier Note that the item can be reached only when lt ezRecord gt is selected as the option for lt Preset Config gt Select lt ezRecord Setup gt from lt Record Setup gt and press ENTER the sub menu appears as below figure ezRecord Setup How Many Days To Record Daytime Record Night Record Weekend Record Record Info Average Normal PPS Average Normal Quality 23 DVR User s Manual 3 6 6 24 Follow these steps to Setup ezRecord e Select lt How Many Days To Record gt and press ENTER then press UP DOWN to choose an option The average normal PPS amp Quality will be adjusted automatically The maximum of days depends of the size of the installed HDD s In other words the larger the size of the HDD installed the more days the unit can record e Move to lt Daytime Record gt and press ENTER This item will determine whether the DVR will record during daytime If yes use UP DOWN to select lt Yes gt as to enable daytime recording or select lt No gt to disable e Repeat the
34. de Section Preset Record Configuration for more detailed information Halfl D1 mode NTSC 720x240 60PPS PAL 720x288 50PPS IDS PF S Event Size ormal PPS lol me Size Ever 3 6 3 To Record Event Video Only If the DVR shall start recording only when alarms are triggered follow the steps below e Enter the OSD setup menu with correct password e Inthe OSD setup menu select lt Record Setup gt menu Move the cursor to the item lt Preset Config gt and select lt Event only gt Refer to OSD Menu Setup Guide Section Preset Record Configuration for more detailed information 3 6 4 Per Camera Configuration This function is used to set the Day Night Weekend PPS Picture per Second and Quality for each channel The Preset Configuration must be set to lt OFF gt for accessing these schedules The menu is displayed as below Record Mode 720x240 60PPS in NTSC 720x288 50PPS in PAL Per Camera Config 22 Cameral Select Night Normal PPS 15 Normal Size Mid Event Max PPS 30 Event Size Best Event Active Both CH1 Weekend DVR User s Manual e First select a Camera for setting its record configuration The image and recording settings from the selected camera will be displayed on the screen e Move the cursor using Direction keys and press ENTER to select an item e Change the value using UP DOWN keys e Press ENTER to confirm the settings or ESC to abort e Press ESC to return to Recor
35. e Protocol Setup The Dome Protocol item lists the available dome protocols for communicating with dome cameras connected to the DVR From the Main menu select lt Camera Setup gt and press ENTER The following menu is displayed Analog Camera Analog Camera Select Dome Protocol Dome ID Camera Title Covert Brightness Contrast Saturation Hue 0 Audio Association To configure dome protocol select a camera first and set the communications protocol associated with dome camera using the Direction keys and ENTER A NOTE The settings become effective after saving the changes and exiting from the menu RS485 Setup The DVR controls the domes via RS 485 communication protocol The RS 485 parameters in the DVR must be set to the same parameters set in dome camera Users are allowed to change the RS 485 settings of the DVR Select lt System Setup gt in Main menu then select lt RS485 Setup gt from the System Setup menu and press ENTER The following menu is displayed RS485 Setup 4 5 4 DVR User s Manual 1 Unit ID 2 Baud Rate 3 Bits 4 Stop 5 Parity The ID number must match the ID address set by the dome The Unit ID is in the range of 1 to 255 Note that there cannot be any two devices on the same bus given the same ID address or a conflict may occur A NOTE The settings become effective after saving the changes and exiting from the menu Dome Controlling Keys The functions o
36. e first time to use the PLAY key the unit will playback from the very beginning of the record Alternatively users can select records from the Search menu to play specific video Refer to section Searching Recorded Video for further information A NOTE When playing back videos with mass motion recorded in D1 mode resolution 720x480 press SEQ key to switch on deflicker function to avoid gleaming of images 27 DVR User s Manual The Forward or Reverse speed indicator will be shown on the bottom left of the screen in the playback mode 28 DVR User s Manual The general operations in playback mode are described as follows Key Usage in Playback The key usage is slightly different in playback mode Following is the key usage found in playback mode e LEFT Reverse Playback The key is used to reverse the recorded video while the unit is playing back Press the key repeatedly to increase the speed of reverse playback by 1x 2x 4x 8x 16x or 32x e RIGHT Forward Playback The key is used to play the recorded video fast forward Press the key repeatedly to increase the speed of forward playback by 1x 2x 4x 8x 16x or 32x e FREEZE Press FREEZE to pause the playback video When the recorded video is paused press LEFT RIGHT to resume playback video single step reverse forward respectively Press FREEZE again to continue playing video e PLAY Press it to start playing back video exit current mode or
37. e hour minute and second of time field To use the arrow buttons Click on the arrow button next to the date field to display the calendar then click the left and right arrow at the top of the calendar to change the date Use up and down arrow next to the time field to change to the wanted time e The other way to select date and time is by moving the blue sliding bar Formatted Indent Left 6 ch Bulleted Level 1 Aligned at 0 Tab after e Click lt OK gt to start the playback or click lt Close gt to abort 0 29 Indent at 0 24 e The other option lt Download DRV gt in lt Select gt field enables users to download the video segment of selected date and time to the PC The selection of time duration is the same as described above Files downloaded will be in drv format 5 3 3 2 To Playback Local drv Files The lt Local Playback gt tab allows users to playback drv video files stored in the PC s hard drive Playback Filename VideoViewer Version 215 460 Version 124330 a Formatted Justified 52 DVR User s Manual Follow below steps to play back a downloaded drv file with the remote monitoring software Formatted Indent Left 6 ch Bulleted Level 1 Aligned at 0 Tab after 0 29 Indent at 0 24 e Click lt Open gt and the file selection screen is displayed e Select the drv video file to playback and click lt OK gt e Click lt OK gt in t
38. equirements Items Requirements _ _ _ _ _ O o Minimum Intel R Pentium R 4 CPU 3 20GHz 2 CPUs RAM 1 GB Recommended Intel Core TM 2 Quad CPU Q6600 2 4GHZ RAM 2 GB Personal Computer 10Base T 10 Mbps or 100Base TX 100 Mbps Network Card operation must match the network configuration 42 DVR User s Manual 5 2 Getting Start of Installation Refer to the following description to install the Central monitoring software 5 2 1 Changing Internet Settings The PC operating with the remote monitoring software should be set to accept ActiveX plug ins Please follow the steps to set the Internet security settings appropriately e Before operating the remote monitoring software please check the IP lt Formatted Indent Left 6 ch Bulleted Level 1 Aligned at 0 Tab after address of the DVR To check the IP address press MENU key on the unit 0 29 Indent at 0 24 and enter password to access OSD setup menu Select lt System Setup gt lt Network Setup gt then lt LAN Setup gt to check the IP e Start the IE it can be started either by clicking on the desktop icon or by using the Start menu to access it NOTE Windows IE provides the ActiveX component that is required when using the remote monitoring software Formatted Indent Left 6 ch Bulleted e Select lt Tools gt from the main menu of the browser then lt Internet Level 1 Aligned at 0 Tab afte
39. f some keys in dome control mode are totally different from normal status function Please refer to Setup Guide for the graphical illustration of functional keys Set Go Preset This key is used to enter the Dome Preset menu to set up certain position as a preset and go to the predetermined preset positions for viewing Toggle Hint Screen This function is used to avoid viewing the dome parameter information while controlling dome camera Press this key to hide the screen Press it again to redisplay the screen Iris Open Use to open the Iris on the dome camera Focus Near Use to focus the dome camera near Zoom In Use to zoom in the dome camera This function enables users to enlarge a certain area ESC Use to leave dome control mode and return to live and full screen viewing mode 39 DVR User s Manual 4 5 5 40 Auto Enter e In OSD setup menu interface the key is used to make selection e In dome control mode this key is used to activate automatic focus and iris function Iris Close Use to close the Iris on the dome camera Focus Far Use to focus the selected dome camera far Zoom Out Use to zoom out the dome camera This function enables users to shrink the current image and view a larger area Pan Tilt Use to pan and tilt dome camera Setting Preset Points The DVR allows users to set preset positions The amount of preset points depends on the dome manufacturer Follow the steps
40. he lt Local Playback gt Screen to start the playback or click lt Cancel gt to abort e View the video playback using the Playback controls e To end the playback click lt Live gt to return to live video 5 3 3 3 Playback Controls When the local or remote video is being played the remote monitoring software is in Playback Mode The playback controls toolbar will emerge on the main window toolbar The Playback controls and indicators are described as below icon Name Description SSS 1 Click to play the recorded video in backward direction Click repeatedly to select the backward Fast Backawad Step Backward playback speed 1x 2x 4x 8x 16x or 32x 2 When playback is paused click repeatedly to move backward step by step 1 While playing click to pause the playback 1 Click to play the recorded video in forward direction Click repeatedly to select the forward Past hone TE 1X ex 4X EX or l Step Forward sa a ac 2 When playback is paused click repeatedly to move forward step by step Formatted Left 53 DVR User s Manual 5 3 4 Search from Event List Click SEARCH the Event List appears The List contains information about the alarm events that the unit recorded and saved Up to 1024 events can be listed in the Event List The Event List displays each event by its number the date and time of the event the type of the event including Alarm In Motion Detection Video Loss and Ove
41. ideo To Export normal video to external device follow these step e Press SEARCH and play wanted normal video by entering date and time Note if the screen is showing in multiple channel mode please make sure there is no window displaying in Live mode or the export will not work e After entering playback mode play the video and press COPY once to mark the starting point of the export video The playback continues e Press COPY again to mark the ending point of the export video Then the ezBurn window will display as below figure The information shown on the window is read only ezBurn confirmation Selected Device Built in DVD RW All data on the disc will be erased Exported Required Size 11 MB Real Export Range From 2008 06 07 AM10 41 13 To 2008 06 07 AM10 41 21 Enter YES ESC NO 39 DVR User s Manual e Press ENTER to start the export or press ESC to abort e If there is no any exportable device connected to the DVR unit then a warning message will be shown on the screen as below figure No exportable device detected Please install the target device media to the DVR Enter Retry ESC Exit 4 4 3 To Export Event Video To export event video follow these steps e Press SEARCH and play wanted event video To play event video refer to Section Searching Recorded Video e After entering the playback mode press COPY The ezBurn window will display as below figure The information show
42. inistrator s password is required to access Record Setup menu In the Main menu move the cursor to lt Record Setup gt and press ENTER the following menu is displayed Record Setup Record Mode 720x240 60PPS Schedule Setup Preset Config Best Quality Per Camera Config ezRecord Setup Circular Recording ON Purge Data Schedule Setup The Schedule Setup is used to set the day and night time or weekend recording schedule Select lt Schedule Setup gt from the Record Setup menu and press ENTER the following menu is displayed Schedule Setup Day Time Start AM 06 00 Day Time End PM 06 00 Night Time Start PM 06 00 Night Time End AM 06 00 Weekend Schedule ON Weekend Start Fri 18 00 Weekend End Mon 06 00 e Make appropriate changes of the start time of Day and Night Time using Direction keys e Press ENTER to confirm the settings or ESC to cancel e f a weekend record is required select lt ON gt to enable the Weekend Schedule in advance and then set the Weekend Start End time e Press ESC to return to previous page 21 DVR User s Manual 3 6 2 Preset Record Configuration The lt Preset Config gt is used to select the preset recording quality and frame rate In normal circumstances it is strongly recommended to set the preset configuration as lt Best Quality gt Below table shows the PPS and picture size under lt Best Quality gt in Half D1 mode Please refer to OSD Menu Setup Gui
43. isplayed Purge Data 1 Purge All Data 2 Purge All Event Data 3 Purge Event Before 2008 01 01 4 Start to Purge No Purge All Data The item is used to delete all recorded video from the database Set this item to lt Yes using UP DOWN keys and start the deletion by setting lt Start to Purge gt to lt Yes gt Purge All Event Data The item is used to delete all event video from database s Using UP DOWN keys to select lt Yes gt and start the deletion by setting lt Start to Purge gt to lt Yes gt Purge Event Before The item is used to delete event video before a specific date Use LEFT RIGHT keys to move the cursor to next or previous field ENTER to select the item and UP DOWN to adjust the value Start to Purge After the video or data to be deleted are selected set this item to lt Yes gt to start the deletion or choose lt No gt to cancel 25 DVR User s Manual 4 4 1 4 1 1 26 Basic Operation The DVR allows users to access some general operations through the front panel easily The following sections introduce the general operations of the unit Viewing Live Playback Video The general functions in live and playback mode are described in the following sections Viewing Modes The DVR provides users Optiview ways of viewing both live and recorded video Following presents these view formats Viewing in Full Screen Press any CHANNEL key directly to view the correspo
44. n is read only ezBurn confirmation Selected Device Built in DVD RW All data on the disc will be erased Exported Required Size 11 MB Export Event Info Data Time Ch Type 2008 06 07 AM10 42 35 13 Motion Enter YES ESC NO e lf there is no any exportable device connected to the DVR unit a warning message will be shown on the screen e Press ENTER to start the export the whole event video to the connected device or press ESC to abort 45 Dome Control The DVR allows users to control a dome camera by the front panel In Live mode users can press CHANNEL key to display the desired dome camera in full screen To enter Dome Control mode press the DOME key and press channel key 2 to display the hint screen To exit the Dome Control mode and return to live mode press ESC or DOME To configure the dome controls settings see the following sections 36 DVR User s Manual Formatted Font Default Arial Font color Black Formatted Normal Justified Indent Left 6 ch No bullets or numbering Tab stops Not at 1 5 Formatted Font color Black 37 DVR User s Manual 4 5 1 4 5 2 4 5 3 38 Dome Connection Follow the steps to install dome camera e See Setup Guide for RS 485 port pin definition e Connect the R R terminals on the dome camera to the D D terminals on the RS 485 port by RS 485 cable respectively Refer to the connection figure illustrated in Setup Guide Dom
45. nding camera image in full screen format Viewing in Multi window Various multi window view formats are offered for selection To switch between available viewing formats press MODE repeatedly The available view formats are illustrated as the following figure AN NOTE 3x3 and 4x4 viewing modes only available in 16 ch models 4 1 2 4 1 4 DVR User s Manual Digital Zoom Users are able to view a 2x full screen in live mode To view the 2x full screen follow the steps e Press any CHANNEL key to view the corresponding camera in full screen e Press ENTER to view 2x zoomed screen of the selected camera e To view a specific area in 2x zoomed screen use Direction keys to pan tilt the zoomed screen e Either press ENTER again or ESC to leave the Zoom mode Viewing Live Cameras Users are allowed to view live camera in Optiview viewing modes including full screen 2x2 3x3 and 4x4 The general operation under live mode is described as follows To Freeze Live Image Press FREEZE while viewing live image the image pauses but the date time information does not and the system clock continues running Press FREEZE to pause the live image press FREEZE again to resume the live camera view Viewing Recorded Video To view recorded video users can press PLAY key directly After presssing the PLAY key the unit starts to continue playing back the recorded video from the suspended point of record If it is th
46. o torage Build in Storage Interface Cartridge DVD RW Export Storage Formatted Font 10 pt x3 SATA Optional x3 USB 2 0 Ports Support ThumbDrive or DVD RW Formatted Font 10 pt Alarm Input x4 Terminal Block x8 Terminal Block x16 Terminal Block Alarm Relay Output x1 Terminal Block Alarm Detection N C N O Programmable Video Loss Detection Formatted Table Remote Operation Monitor Playback Recording System Setup Dome Camera Control Archiv RS 485 Terminal Block Dome Control Protocol Pelco P Pelco D AD422 Fastrax 2 Panasonic 57 DVR User s Manual General o OSOS Unit Dimension WxHxD 362 x 90 x 350 mm 14 2 x 3 5 x 13 7 inches nit Weight 5 5 Kg 12 1 Ibs Package Dimension WxHxD 410 x 210 x 500 mm 16 1 x 8 2 x 19 6 inches ackage Weight 7 Kg 15 4 Ibs 5 C 40 C 23 F 104 F Relative Humidit 10 90 Non condensing Power Consumption amp Input AC 100 240V 50 60 Hz 60W Adaptor Appendix B Connect UTP Camera UTP short for Unshielded Twisted Pair is a popular type of cables that is one of the most common medium in telecommunication industry Installing the UTP module allows the DVR to supply power to and transmit images from any four distinctive UTP cameras through the UTP cables CAT5 This leads to an economical and fast installation of surveillance Some benefits are described as below Cost Down on Wiring The cost of wiring decreases for more than 60 j
47. ocus A F Click on it and the focus of the camera will be automatically adjusted to show a clearer image Dome ID ID Click for changing the dome ID and protocol ETMA User s privilege is not allowed to change the i Protocol DynaColor dome ID and protocol Admin privilege is required to access this function Focus Use to adjust the camera lens to focus on objects for a clear view Click on lt Focus gt to focus near or lt Focus gt to focus far Iris 49 DVR User s Manual This item is used to open and close the iris to let more or less light into the camera Click on lt Iris gt to open iris or lt lris gt to close iris Zoom Users are allowed to zoom in or zoom out using the adjusting buttons Zoom in to enlarge a certain area and zoom out to view more area Direction Button This button is used to pan and or tilt the dome camera Click the arrows in the directions to be viewed 5 3 2 Instant Recording The Instant Recording function allows users to record video quickly to the PC NOTE The Audio function is set to OFF as the default setting Formatted Normal Tab stops Not at 1 Audio Instant Formatted Font 12 pt Not Bold Font The Instant Recording function allows users to record On Off Recording Gees p pe video quickly to the PC NOTE The Audio function is set to OFF as the default setting Formatted Font Default Times New Roman 12 p
48. ols Status Help DI 724P Virtual Server i Virtual Server is used to allow Internet users access to LAN services Enabled Disabled Name DYR 1 Private IP 192 168 0 167 rep A Application Protocol Type TCP wi Private Port 80 Filter Public Port 80 Schedule Always O From Time 00 v o0 v Ta 00 v 00 vi Apply Cancel Help F Firewall day Sun v to Sun vi 66 Select lt Enabled gt to set up the service Enter the name of the setting in the Name field DVR 1 Enter Private IP 167 Choose lt TCP gt as the Protocol Type Enter Private Port 80 Enter Public Port 80 Click lt Always gt for the Schedule setting Click lt Apply gt Click lt Continue gt to go on when the following screen displays D Link AirPlus G High Speed 2 4GHz Wireless Router The device is restarting Continue e Follow the steps to set up web port forward to DVR 2 e Now DVR 1 can be connected via http 218 160 54 13 80 and DVR 2 can be Click lt Enabled gt to set up the service Enter the name of the setting in the Name field DVR 2 Enter Private IP 200 Choose lt TCP gt as the Protocol Type Enter Private Port 81 Enter Public Port 81 Click lt Always gt for the Schedule setting Click lt Apply gt connected via http 218 160 54 13 81 e If there are more than one DVR behind the router repeat the steps for port mapping setting
49. om the DVR lt Local Playback gt enables users to playback a recorded video file stored on the hard disk drive of the PC The DVR continues recording while playing back recorded video on the PC either remote playback or local playback Playing Back Remote Video To view remote video click lt Play gt on the main window toolbar and then lt Remote Playback gt tab The lt Remote Playback gt screen will be displayed Playback emote Playback Local Playback Available Record Video From 11 26 2007 8 40 35 AM To 1 11 2008 5 28 03 PM 11 26 2007 D 8 40 35 AM ko D Camera Select Playback 2 ms Download DRY 5 6 mr 3 VideoViewer Version Version Er 1 2 433 0 The lt From gt and lt To gt in the lt Available Record Video gt displays the date and time from which recorded video is available for playback To playback remote video segments follow these steps e Choose lt Playback gt in lt Select gt field for playback recorded video i e In lt Start gt field users can change the date and time either by typing 51 Formatted Font Default Arial Formatted Indent Left 6 ch Bulleted Level 1 Aligned at 0 Tab after 0 29 Indent at 0 24 DVR User s Manual desired numbers directly or using the arrow buttons To type directly Click on day month and year of date field respectively and type the desired numbers directly Follow above steps to adjust th
50. ontrole 2 2 62 Appendix G Setting up a DVR behind a Router in 65 DVR User s Manual Overview The Optiview H 264 DVR is an integrated digital video recorder that combines the features of a time lapse audio video recorder a multiplexer and a video server to create a single security solution Its outstanding triplex operation enables users to view live video search and playback any recorded video by date time or event and remotely monitor the unit via internet on PC MEANWHILE the recording of the DVR unit is ongoing simultaneously The Optiview H 264 DVR is enhanced to provide Dual Codec including H 264 and MJPEG compression mode Moreover its distinctive hybrid solution supports the coexistence of network compatible IP devices and convenient analog connections In addition to these sophisticated functions another marvelous implementation is the brand new experience of Graphical User Interface GUI that optimizes the monitoring controls of the unit The Optiview H 264 DVR is pre installed with remote viewing and configuration software which is a Web browser plug in allowing users to view live or recorded video images and enables remote configuration The remote software is stored in the Optiview H 264 DVR and deployed over a LAN WAN or Internet connection to remote Windows based computers This simplifies the installation and maintenance of the software components so all remote users are using the same software coming from
51. oom mode COPY In Playback mode press COPY to select the start and end time of the export video Refer to Section Video Export for detailed information CALL e In Live mode press this button to enter call monitor control mode e In Dome mode press CALL in association with ENTER to enter the OSD setup menu of the dome camera See Dome Control section for more information DVR User s Manual DOME Press the key to enter dome control mode Please refer to Section Dome Control for detailed controlling operation ESC Press to cancel or exit from certain mode or OSD setup menu without changing the settings made previously MODE Press repeatedly to select for wanted main monitor display format There are four available view modes full screen 4 window 2x2 9 window 3x3 and 16 window 4x4 Refer to Section View Modes for detailed information PLAY Press this key to switch between live image and playback video A NOTE The video of latest 5 10 minutes cannot be played back because the video is still saved in the buffer FREEZE e Press FREEZE while viewing live image the live video will be frozen The date time information shown on the monitor will continue updating Press FREEZE again to return to live mode e Press FREEZE while playing the recorded video the playback video will be paused Press LEFT RIGHT to move the recorded video reverse forward by single step Press FREEZE again to continue playing video
52. r Options gt and then click the lt Security gt tab 0 29 Indent at 0 24 e Select lt Trusted sites gt and click lt Sites gt to specify its security setting Internet Options PE z 2 General Security Privacy Content Connections Programs Advanced Select a Web content zone to specify its security settings O Internet Local intranet AAC Restricted sites Trusted sites This zone contains Web sites that you trust not to damage your computer or data Security level for this zone Custom Custom settings To change the settings click Custom Level To use the recommended settings click Default Level Formatted Indent Left 6 ch Bulleted Level 1 Aligned at 0 Tab after 0 29 Indent at 0 24 43 DVR User s Manual e Uncheck Require server verification httos for all sites in this zone Type the IP address of the unit in field and click lt Add gt to add this web site to the zone Trusted sites You can add and remove Web sites From this zone All Web sites in this zone will use the zone s security settings Add this Web site to the zone Bott 192 168 7 18 Web sites http 192 168 8 167 http Ihttp 192 168 8 174 Require server verification https for all sites in this zone e Click lt OK gt to confirm the setting and close Trusted sites dialog Formatted Indent Left 6 ch Bulleted
53. r Speed and the camera channel where the event occurred Event List E x Formatted Font Default Arial 2008 01 11 Phi 03 57 47 2008 01 11 PM 04 53 26 2000 01 11 Ph 04 53 33 2008 0111 PM 04 53 46 2008 0111 PM 04 53 58 2005 01 11 Ph 04 54 13 2008 01 11 Ph 04 59 2008 0111 PM 04 59 30 2006 0111 PM 04 59 50 2008 01 11 Ph 04 59 57 2008 0191 PM 05 00 04 2008 0111 PM 05 00 12 2005 0111 Pr 06 00 20 CL KL 2008 0191 PM 05 00 42 Previous Next T Type A Alarm In MEMotion detection video lass S Over speed CH Channel 1 22 3 etc To view an event video follow these steps e Click SEARCH button positioned in the main window toolbar The Event Formatted Indent Left 6 ch Bulleted Level 1 Aligned at 0 61 Tab after List appears 0 9 Indent at 0 85 e Scroll through the Event List and highlight the interested events e Double click on the desired event to view the event video 54 9 3 5 9 3 6 DVR User s Manual Take a Snapshot Snapshot is a simple screen capture tool When users click on the SNAPSHOT button it will capture the screenshot of the window that is currently showing on the screen Each click captures one screenshot to be saved as a JPEG file on the desktop The snapshot file will be named as Am Snapshot Health Status of HDD This function verifies the HDD status of the DVR The following figure is an example DYE health status ST340
54. splay mode and to operate dome camera control refer to the following sections 5 3 1 1 Selecting Display Mode Choose the number of windows to be displayed on the main window Click one of the display buttons in MODE section Available selections are 4 9 and 16 camera displays To view certain window in full screen either double click on the wanted window or click on the corresponding CAMERA button Formatted Font Default Arial 48 DVR User s Manual 5 3 1 2 Operating Cameras with Dome Control The remote monitoring software allows users to control and configure a dome camera remotely Click on any CAMERA button displayed with a dome icon to view the camera in full screen The Dome Control Panel will be displayed on the main window The items on the dome control panel are described as follows Set Preset Set Preset is used to set up preset positions The remote monitoring software allows its user to set up to 255 preset positions with American Dynamics Fastrax JVC Panasonic C amp N and Pelco Pelco P amp Pelco D domes Use Direction buttons to move dome camera to an appropriate position and then click the button and choose wanted number from the pull down list The preset position is named as the selected number Go Preset Go Preset is used to call the camera preset point which was set up with the set preset point function Click and choose a number to call the preset point for viewing Auto F
55. stop playing back video and return to live mode Pause Playback and Single Step Forward To pause and resume recorded video follow these steps e Press any CHANNEL key to view the corresponding camera in full screen e Press FREEZE to pause the current playback image e Press RIGHT LEFT Direction keys to move the video single step reverse forward Press and hold RIGHT LEFT keys to repeatedly reverse forward the video single step e Press FREEZE again to resume the playback operation 29 DVR User s Manual 4 2 4 2 1 30 Viewing Live Image in Playback Mode Press the MODE key repeatedly in playback mode a 16 window viewing mode contains both live and playback image appears This viewing mode is illustrated as the following figure Live Image CT Playback The eight windows on the upper half of the screen playback the Live video from channel 1 to channel 8 respectively and the other windows allow users to view Playback image from channel 1 to channel 8 Sequence Setup This section introduces the way to view sequence mode with both Main Monitor and Call Monitor if connected Sequence function can avoid manual backtracking and provides more flexibility while monitoring surveillance Sequence with Main Monitor Automatic sequence function can be observed in any view mode Select certain view format and press SEQ to toggle the automatic sequence press ESC to stop sequencing The figure below displays the 4
56. t Not Bold Font color Auto 5 3 2 1 Recording Video Instantly Follow the steps to start recording instantly e Click on the lt Instant Recording gt button Formatted Indent Left 6 ch Bulleted SE Level 1 Aligned at 0 Tab after e Select the destination folder to save the video 0 29 Indent at 0 24 e lick on th n in to stop recordina Formatted Indent Left 6 ch Bulleted Glick on the butto agam H 9 Level 1 Aligned at 0 Tab after 0 29 Indent at 0 24 Tab stops Not at l l 0 29 A NOTE The instant recording video will be saved as drv file 5 3 2 2 To Playback Instant Recorded Video Follow the steps to playback a video recorded by Instant Recording Formatted Indent Left 6 ch Bulleted Level 1 Aligned at 0 Tab after 0 29 Indent at 0 24 e Click lt Play gt on main window toolbar and click lt Local Playback gt tab 50 5 3 3 9 3 3 1 DVR User s Manual e Click lt Open gt to choose a recorded file e Click lt OK gt to start playing the recorded video To Playback Video The remote monitoring software allows users to view recorded video either from the DVR or from the hard disk drive of the PC To access the Playback screen click lt Play gt button on the main window toolbar There are three tabs in the Playback screen lt Remote Playback gt and lt Local Playback gt tabs lt Remote Playback gt allows users to play back fr
57. t RTP RTSP HTTP gt and lt HTTP gt A NOTE Please contact manufacturer of the IP camera for assistance if the IP camera s Management Port Streaming Port Streaming Format Streaming Protocol are unknown DVR User s Manual 3 5 3 3 5 4 3 5 9 20 Device Setup Enter lt Device Setup gt to configure the basic settings of the IP camera The basic settings include the IP camera s product name image quality image adjustment etc Set the item lt Apply gt to lt Yes gt to apply the changes NOTE The administrator account and password of the IP camera A should be entered in order to change the basic settings Activated Access this item and select lt Yes gt to activate the connection to the IP camera To deactivate the connection select lt No gt NOTE Once the connection to the IP camera is activated menu items A lt Hostname IP gt lt Model gt and lt Connection Setup gt will be grayed out and cannot be accessed Status After the connection to the IP camera is activated users can check the connection status The menu will be shown as below Status 1 Model St 2 Resolution 720 480 3 PPS 10 4 Bandwidth 20 KB Sec 5 Pkg lost rate 0 1 The information shown on the monitor is read only 3 6 3 6 1 DVR User s Manual Record Schedule Quality Setting The Record Setup menu allows users to set recording quality recording schedules and other recording parameters Adm
58. t the unit from overheating The maximum allowable temperature of operating environment is 40 C The unit utilizes heat conducting techniques to transfer internal heat to the case especially to the bottom side of the unit A NOTE Be sure the rubber feet are not removed and always leave a space for air ventilation on the unt e bottom side Selecting Video Format The DVR is designed to operate under either NTSC or AL NTSC PAL video formats The switch is on the rear panel S 2 3 2 4 DVR User s Manual Connecting Devices to the Unit This section lists some important notices that should be read before making any connection to the DVR Connecting Required Devices Before powering up the unit cameras and a main monitor should be connected to the unit for basic operation If needed connect a call monitor for displaying full screen video of all installed cameras in sequence Connecting Short term Device If any short term devices shall be installed to the DVR as parts of the unit system such as USB ThumbDrive or any USB devices etc make sure those devices are connected only after the unit is powered up The reason is because the DVR can recognize the external devices only after the power up process is done completely Rear Panel Connections There are various connectors on the rear panel for the DVR installations The following figure shows the connectors by name and followed by the detailed description of each conne
59. te Cookies Delete Files Settings History The History folder contains links to pages you ve visited for quick access to recently viewed pages Days to keep pages in history 20 gt Clear History ee Click the lt Delete Files gt button in the lt Temporary Internet Files gt field the Formatted Indent Left 1 01 Bulleted Gi Level 1 Aligned at 0 Tab after lt Delete Files gt screen displays as below 0 29 Indent at 0 24 Tab stops Not at Delete Files ES 4 Delete all files in the Temporary Internet Files ou can also delete all your offline content stored locally ee Check the lt Delete all offline content gt box and click lt OK gt Formatted Indent Left 1 01 Bulleted Level 1 Aligned at 0 Tab after e Now enter the IP address of the DVR to make the connection again 10 29 Indent at 0 24 Tab stops Not at 0 29 I Formatted Indent Left 6 ch Bulleted Level 1 Aligned at 0 61 Tab after 0 9 Indent at 0 85 56 DVR User s Manual Appendix A Technical Specifications All specifications are subject to change without notice Specifications Ach Model 8ch Model 16ch Model Se Formatted Justified ideo Formatted Table Embedded Linux 1 0Vp p 75 ohm BNCx8 1 0Vp p 75 ohm SE 75 TP Optional 4ch UTP 8ch UTP 16ch UTP nput IP devices Up to 2ch Up to 4ch Main Monitor BNC x 1 1 0Vp p 75 ohm
60. the unit The key features of the DVR are listed as follows Advanced Functions e Triplex Operation Live Record Playback Network e Supports up to 3 internal SATA HDDs e Supports internal DVD RW e UTP Connection Optional e Dual Codec for H 264 MJPEG recording e Supports up to 2ch IP camera s e Supports recording of Megapixel IP camera s e Multi language support e Multiple built in dome camera control protocols DVR User s Manual 2 1 2 2 e Supports Pre Alarm Recording e Motion Detection Marker e Remote software for remote monitoring e Central Management System CMS for large scale video management Human Technology e ezBurn for quick video export e ezRecord for quick recording setting e ezDDNS for automatic DDNS configuration e GUI interface e IR Remote Control Optional e Compact Control Keyboard Optional System Setup The notices and introduction on system installation will be described particularly in this chapter Please follow the description to operate the unit In order to prevent the unit from data loss and system damage that caused by a sudden power fluctuation use of an Uninterruptible Power Supply UPS is highly recommended Position the Unit First note to position mount the DVR in a proper place and be sure to power off the unit before making any connections The placed location should avoid hindering or blocking the unit from airflow Enough airflow is needed to protec
61. to set preset points e Press a Channel key to view the corresponding camera in full screen e Then press DOME to enter dome control mode A Hint Screen shown as below figure displays on the screen e Press 2 to hide the dome control Hint Screen press 2 again to toggle the Hint Screen e Use Direction keys to position the dome camera to desired position Hint Screen DOME ESC Exit MODE PLAY Iris Open Close SEQ FREEZE Focus Near Far MENU SEARCH Zoom In Out ENTER Auto Focus Iris lt A VP Pan Tilt CH1 Set Go Preset CH2 Hint Screen On Off Dome Control DVR User s Manual Press 1 to access the Set Go Preset function The Dome Preset menu is displayed Dome Preset First Page Index Set Preset Go Preset No No No No No No No Use UP DOWN keys to select the desired preset number from the menu Set the lt Set Preset gt of the selected preset number to lt Yes gt and press ENTER to save the position Now the preset is set and ready to be called 4 5 6 Calling Preset Points Follow the steps to call preset points Press a Channel key to view the corresponding camera in full screen Then press DOME to enter dome control mode Then a Hint Screen shown as blow figure will display on the screen Press 2 to hide the dome control Hint Screen press 2 again to toggle the Hint Screen Press 1 to access the Set Go Preset function Dome Preset First Page Index Set Preset Go Preset

Download Pdf Manuals

Related Search

Related Contents

MI 2-300 CA/CD AF  取扱説明書 - NTT西日本  Manual M-SF-VERTI140  NX-series Safety Control Unit Instructions Reference Manual  Nikon COOLPIX S4 User's Manual  LFH0602/00 Philips digital recorder  UISB-420T User`s Manual  PDP-YTW90_取扱説明書  EXSYS USB to 8S Serial RS-232 ports (Prolific Chip-Set)  ici  

Copyright © All rights reserved. Failed to retrieve file