user manual powersure™ personal
Contents
1. gt 4 minutes 12 minutes 7 10 hours to 90 capacity after full discharge into 100 resistive load 32 F to 104 F 0 C to 40 C 5 F to 122 F 15 C to 50 C 0 to 90 non condensing Up to 10 000 ft 3000 m at 95 F 35 C without derating lt 40 dBA at 1 meter UL 1778 c UL Listed IEEE C62 41 Category A IEC 801 2 Level 3 Criterion lt 2 IEC 801 3 Level 3 Criterion lt 2 IEC 801 4 Level 4 Criterion lt 2 FCC Part 15 Subpart B Class B ISTA Project 1A 10 DISCONTINUED PRODUCT LIMITED WARRANTY Liebert Corporation extends the following LIMITED WARRANTY to the purchaser and to its customer collectively referred to as the Purchaser the enclosed Uninterruptible Power System UPS and components are free from defects in materials and workmanship under normal use service and maintenance FOR A PERIOD OF TWO YEARS FROM THE DATE OF ORIGINAL PURCHASE from Liebert or the Liebert dealer or retailer THE FOREGOING WARRANTY IS THE ONLY WARRANTY GIVEN AND NO OTHER WARANTY IS PROVIDED EXPRESS OR IMPLIED INCLUDING WITHOUT LIMITATION MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE Certain aspects of disclaimers are not applicable to consumer products acquired by individuals and used for personal family or household purposes as distinguished from industrial or other purposes Local laws may not allow limitations on how long an implied warranty lasts so the above limitation may not appl2. DISCONTINUED PRODUCT DAL iebert _ Keeping Businessin Business POWERSURE PERSONAL 300 500 VA 115V USER MANUAL English IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS This manual contains important safety instructions that should be followed during the installation and maintenance of the UPS Please read this manual thoroughly before attempting to install or operate this UPS WARNING To prevent the risk of fire or electric shock install the UPS in a temperature and humidity controlled room free of conductive contaminants Operate the UPS only from a properly grounded AC supply To reduce the risk of electric shock do not remove the cover as it has no user serviceable parts inside Some components are live even when AC power is disconnected For service contact a qualified technician To reduce the risk of fire use the proper rating when replacing the fuse CAUTION Although your UPS has been designed and manufactured to assure personal safety improper use can result in electrical shock or fire To insure safety please observe the following rules Turn off and unplug your UPS before cleaning Do not use liquid or aerosol cleaners A dry cloth is recommended to remove dust from the surface of your UPS Do not install or operate your UPS in or near water Do not place UPS on an unstable cart stand or table Do not place UPS under direct sunlight or close to heat emitting source
3. NT DESCRIPTION 1 Low Battery open collector 2 No connection 3 No connection 4 On Battery Mode Shutdown 5 12 DC 5 On Battery Mode Shutdown Return 6 7 8 9 Utility Fail Normally On open collector Low Battery open emitter Utility Fail common pins 6 amp 9 Utility Fail Normally Off open collector Pin Assignment Collector to Emitter Open Collector Open Emitter Maximum voltage and current on pins 1 6 7 8 9 is 60V DC 5 0 mA DISCONTINUED PRODUCT TROUBLESHOOTING If the UPS fails to operate properly turn off the unit and repeat the steps in the installation section of this manual below If the problem persists refer to the chart PROBLEM C USE UPS will not start Overload Short Circuit UPS starts on battery but will not switch to AC UPS not plugged in Fuse blown Power not available at utility receptacle Input voltage below threshold AC overvoltage SOLUTION Check fuse at rear of UPS If blown replace it and restart the UPS For further help call your Liebert representative Plug in power cord securely Replace fuse and restart UPS Call a qualified electrician Wait until voltage rises to appropriate level Voltage must be higher than 90 VAC AC voltage must be less than 132 VAC UPS shuts down Overload Short Circuit Low Battery Sitenet 1 Shutdown Check the fuse holder at rear of UPS If fuse is bl
4. Purchaser LIFE SUPPORT POLICY This product is not recommended and the Company will not knowingly sell this product for use with life support and other designated critical devices ANY SUCH USE BY A USER AUTOMATICALLY VOIDS AND DISCLAIMS ANY AND ALL WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND EXPRESS WARRANTIES THAT THIS PRODUCT WILL CONFORM TO ANY AFFIRMATION OR PROMISE FOR THIS PRODUCT AND THE USER AGREES THAT IN NO EVENT SHALL THE COMPANY BE LIABLE FOR CONSEQUENTIAL OR INDIRECT DAMAGES 11 DISCONTINUED PRODUCT Lie bert Keeping Business POWERSURE PERSONAL 300 500 VA 115V Technical Support U S A Outside the U S A U K France Germany Italy Netherlands E mail Web site Worldwide FAX tech support The Company Behind The Products With more than 500 000 installations around the globe Liebert is the world leader in computer protection systems Since its founding in 1965 Liebert has developed a complete range of support and protection systems for sensitive electronics Environmental systems close control air conditioning from 1 5 to 60 tons Power conditioning and UPS with power ranges from 250 VA to more than 1000 kVA Integrated systems that provide both environmental and power protection in a single flexible package Monitoring and control on site or remote from systems of any size or l
5. e kept charged to obtain their designed life batteries when connected to the utility supply The UPS continuously charges the When storing the UPS for any length of time it is recommended to plug in the UPS for at least 24 hours every four to six months to ensure full recharge of the batteries FUSE REPLACEMENT PROCEDURES Insert flat blade screw driver into slot and pull fuse holder out to remove AC Inlet Fuse Holder CAUTION Before changing the supply fuse turn off the UPS and unplug the input cord from the AC input power supply and from the UPS 1 2 3 Remove the fuse holder by inserting a flat blade screwdriver into the slot and pulling out as indicated in the figure above Remove the input fuse Remove the spare fuse from its position by using the screwdriver to push it out Place spare fuse in the input fuse position and replace the fuse holder The fuse holder will lock into position Reconnect the input power lead to the UPS and the input power lead to the input AC supply Restart the UPS The UPS is ready for normal operation Personal Model Fuse Type PSP300 115 5A 125V PSP500 115 6A 125V DISCONTINUED PRODUCT COMMUNICATIONS The PowerSure Personal UPS contains a standard DB 9 receptacle located on the rear of the UPS unit Several signals are provided on this port and are assigned as follows PIN ASSIGNME
6. in a residential installation This equipment uses generates and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference with radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that which the receiver is connected Consult the dealer or an experienced radio TV technician for help MAJOR COMPONENTS PowerSure Persi onal DB 9 Interface for SiteNet MultiLink Cable LED Utility Battery LED Power ON Standby Output Receptacles Input Receptacle Fuse Holder KuLiebert FRONT BACK DISCONTINUED PRODUCT PowerSure Personal Line Diagram INPUT OUTPUT TVSS and Transfer L EMI RFI Switch L quer I Battery Inverter N N G G Normal Operation During normal operation incoming utility power is supplied to the load as shown above The utility power passes through the EMI RFI filters and TVSS circuitry and then through the transfer switch
7. ocation Service and support through more than 100 service centers around the world and a 24 hour Customer Response Center 12 1 800 222 5877 1 614 841 6755 44 1628 403 200 33 1 4 360 26 19 49 21669649340 39 2 98250 1 00 31 475 504050 upstech liebert com www liebert com 614 841 5471 While every precaution has been taken to ensure accuracy and completeness of this literature Liebert Corporation assumes no responsibility and disclaims all liability for damages resulting from use of this information or for any errors or omissions 2001 Liebert Corporation All rights reserved throughout the world Specifications subject to change without notice Liebert and the Liebert logo are registered trademarks of Liebert Corporation All names referred to are trademarks or registered trademarks of their respective owners SL 23265 2 01 Rev 2 g vu 26 oz E n Am U
8. or Shutdown 2 seconds 9 DISCONTINUED PRODUCT 115V SPECIFICATIONS Model Number PSP300 115 PSP500 115 Model Rating VA W 300 180 500 300 DIMENSIONS in mm Unit H x W x D Shipping H x W x D WEIGHT Ibs kg Unit Shipping 178 x 76 x 238 178 x 76 x 238 10 6 x 4 3 x 12 3 10 6 x 4 3 x 12 3 270 x 110 x 312 270 x 110 x 312 INPUT AC PARAMETERS Voltage Range without Battery Operation Low Line Transfer High Line Transfer Frequency Input Power Cord 90 132 VAC 90 VAC 132 VAC 45 55 Hz or 54 66 Hz auto sensing 6 ft detachable w NEMA 5 15 P OUTPUT AC PARAMETERS Output Receptacles Voltage Battery Mode Output Current Waveform Battery Mode Utility and Battery Modes Overload Shutdown Utility and Battery Modes 4 5 15R 115 VAC 5 Stepped Sinewave 50 Hz or 60 Hz auto sensing 101 120 Overload Warning Overload Warning t 15 25W 20 45 W BATTERY PARAMETERS Rating Manufacturers Back up Time Full load Half load Recharge Time ENVIRONMENTAL Operating Temperature Storage Temperature Relative Humidity Operating Elevation Audible Noise AGENCY Safety Surge ESD Susceptibility Electrical Fast Transient Burst Emissions Transportation Valve regulated nonspillable lead acid 1 x 12V x 4 5 Ah 1 x 12V x 7 0 Ah CSB Panasonic BB Battery and Yuasa 2 6 ms typical At 77 F 25 C resistive loading with fully charged batteries
9. own replace it and restart the UPS If problem persists disconnect some of the equipment from your UPS the total wattage of your equipment may exceed the capacity of the UPS For further help call your Liebert representative Turn OFF equipment and recharge UPS battery for at least 7 to 10 hours If problem persists contact your Liebert representative Consult the Sitenet 1 User Manual or contact your LAN administrator DISCONTINUED PRODUCT LED amp ALARM INDICATIONS Startup Action Press ON UPS Start Flashi Plash Bee button for 1 2 sec 1 2 sec 1 2 sec 2 seconds AC Mode Mode Green Red Alarm Indicates AC Normal ON OFF OFF UPS is on line Check Battery ON Flash 10 sec Flash 10 sec Battery every 4 min every 4 min Fault Overload ON Flash every 2 Beeps every Reduce loads 0 5 sec 0 5 sec UPS Fault ON ON CGontindous UPS Failure Beep Battery Mode Mode Green Red Alarm Indicates Back Up Flash OFF Beep UPS is on every 3 sec every 3 sec Battery UPS Fault Pen ON Contindgus No Output every 3 sec Beep Low Battery Flash OFF Beep UPS is about Warning every 0 5 sec every 0 5 sec to shutdown Low Battery Flash OFF Beep UPS Shutdown 5 sec 5 sec Shutdown Overload Flash Flash 2 Beeps Reduce loads Warning every 3 sec every 0 5 sec every 0 5 sec Overload Continuous Reduce loads Shutdown OFF ON Beep amp restart Shutdown Mode Green Red Alarm Action Press ON URS OFF OFF OFF button f
10. s Do not place UPS power cord in any area where it may get damaged by heavy objects Follow all warnings and instructions marked on the UPS Do not attempt to service the UPS as it has no user serviceable parts inside Refer all repairs to qualified service personnel ATTENTION Turn off and unplug your UPS from the outlet and contact qualified service personnel if The power cord or plug is damaged Liquid has been spilled on the UPS The fuse blows frequently The UPS does not operate even when user follows the operating instructions CONDITIONS OF USE The input receptacle must be within 6 feet 1 8 meters of the UPS Your UPS provides conditioned power to connected equipment Maximum load must not exceed that shown on UPS rating label If uncertain consult your distributor or Liebert Placing magnetic storage media on top of the UPS may result in data corruption This equipment can be operated by individuals without previous training DISCONTINUED PRODUCT INTRODUCTION amp SYSTEM DESCRIPTION Congratulations on your choice of the Liebert PowerSure Personal Uninterruptible Power System UPS It provides conditioned power to microcomputers and other sensitive electronic equipment NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference
11. to the connected loads The battery charger is operational whenever AC power is supplied even when the unit is switched off PowerSure Personal continuously monitors the batteries Transfer Switch In Normal mode the transfer switch passes utility AC power to the connected load When input utility or frequency is outside acceptable limits the transfer Switch activates and transfers the UPS to battery Battery Charger In normal operation the battery charger converts utility AC power into regulated DC power to float charge the battery Battery The PowerSure Personal utilizes valve regulated nonspillable lead acid battery At typical room temperatures and with the UPS float charging the battery system will last many years Transient Voltage Surge Suppression TVSS amp EMI RFI Filters These UPS components provide surge protection and filter electromagnetic interference EMI and radio frequency interference RFI They minimize any surges or interference present in the utility line and keep the sensitive equipment protected DISCONTINUED PRODUCT GENERAL INSTALLATION tit Remove from Box Check for Damage 4lnches 110 mm 32 104 F 0 40 C Plug in Loads Plug UPS into AC Press ON Button for 2 seconds DISCONTINUED PRODUCT MAINTENANCE The PowerSure Personal UPS requires very little maintenance The batteries are valve regulated nonspillable lead acid and require that they b
12. y to you This warranty gives you specific legal rights and you may have other rights which vary according to local law Certain repairs or services are the responsibility of the Purchaser and the Purchaser is expected to pay for them This warranty does not extend either to products with removed or altered serial numbers or to any losses or damages due to act of God or source external to the product misuse accident abuse neglect negligence unauthorized modification alteration or repair use beyond rated capacity or improper installation maintenance application or use including without limitation use in a manner contrary to the accompanying instructions or applicable codes WARNING Warranty is void if the battery is allowed to discharge below the minimum battery cutoff point To prevent such discharge DO NOT leave the unit power switch ON for more than two 2 days without AC power being supplied to the UPS The battery must be recharged every four 4 to six 6 months when not in use If the UPS fails to conform with the above warranty within the two year warranty period Liebert will repair or replace the UPS at Liebert s option Repairs or replacements are warranted for the remainder of the original warranty period To make a warranty claim purchaser should call a Liebert Representative to obtain a Returned Goods Authorization number and shipping instructions Return transportation costs to Liebert are the responsibility of the
Download Pdf Manuals
Related Search