Athena 1 to 7 targets CD/DVD Duplicator User`s Manual
Contents
1. Copy amp Compare79 45 gt Analyzing Analyze Disc gt Start Copy 79 45 source disc gt copying gt 10 08 00 Copying finished and start Comparison gt Compare 79 45 gt 100 finished 45 35 45 and Eject discs Copyright 2005 by ILY Enterprise Inc All Rights Reserved xx The Compare Disc function serves as a bit by bit Comparison between Master Reading Source and all the copied discs inside the writer trays This operation ensures that all of your copies are completely identical to your Master Reading Source Copyright 2005 by ILY Enterprise Inc All Rights Reserved OPERATING GUIDE 5 VERIFY This function will check your master disc and the copied discs readability to ensure that all of your copies are readable a Put master source disc and all copied discs into the duplicator b Press OK The duplicator will then automatically start loading the disc analyzing the source disc and start verification C When verification is finished the duplicator writer trays will automatically eject 5 Verify Ag Verify 79 45 7 disc detected gt PIGS OK to Joad dises gt Loading Disc Verify 79 45 gt Start Verify 79 45 gt 100 Finished Analyze Disc verification gt 45 35 45 and eject discs gt Analyzing source disc gt COMPARE DISC Use this function to make a bit by bit Comparison between Master Reading Source and all the copied discs inside the writer tray Th2. Copyright 2005 by ILY Enterprise Inc All Rights Reserved OPERATING GUIDE 3 COPY amp VERIFY This operation will make copies and after the copy process has been finished it will continue a Verification process automatically to ensure data s correctness Therefore the duplicator will not eject discs when copy was finished until verification is finished a b C d This operation will copy the Master Source onto Blank CD DVD discs Before you use this function to copy make sure you have put correct reading source and blank discs The system will automatically detect and display how many blank discs were detected When the system is ready to copy just press OK to execute CD DVD copying When the system starts the copying process it will first start loading the disc Afterwards it will analyze the discs and then the copying process will begin During the copying process the LCD screen will display the Master Source Disc s data size and copying progress When finished the system will automatically continue to verify to make a disc Readability check When the verification is finished the Writer Trays will automatically eject the finished discs 3 Copy amp Verify 7 discs detected gt Press OK to load discs gt Copy amp veriy Loading Disc Copy amp Verify79 45 gt Analyzing analyze Disc gt Start Copy 79 45 source disc gt Copying gt 10 08 00 Copying finished and Ve
3. 12 1 1 Make Hard Drive to Disc Copies a Make sure your Hard Drive is set as your Master Reading Source Once you are finished select the image and then your HDD will automatically be set as the Reading Source b Go back to the main menu and press the up or down buttons to select 1 Copy function c Please insert blank discs into writer trays If there is a disc in the Reader tray it will be ignored d Press OK to start copying If you selected 11 2 Auto Start when you place a blank disc in any of the writer trays the duplicator will automatically begin the copying process e When finished trays will automatically eject themselves rNote Once you have selected a HDD Image the HDD will automatically be set as the Reading Source If you would like to make Disc to Disc Copies you have to go back to 8 Select Source to select the CD DVD ROM as your Reading Source 12 2 Disc gt Image This function will show you how to load your master source disc onto the Hard Drive and save it as an image file a Place Master Source Disc into any Drive b Select 12 2 Disc gt Image and press OK Image Manager AL Disc gt A001 Disc gt A001 SDiccasimage 7 Press OK To 446MB Pile Finished The source disc loaded to HDD as image file A001 Note The source disc can be placed in any Reader or any one of Writer Drive 12 3 Reader Speed When you would like to perform this function 12
4. a Select 9 Track Edit and press OK 9 Track Edit b Move to select 2 Close Disc and press OK to start close disc process c When Close Disc is processing you will see o O blinking on the screen d When the process is done writer will automatically eject the disc and you will see _ on the screen gt Close finished Track Edit Close Disc 2 Close Disc aries Ob and eject disc 9 3 Disc Info This feature allows you to check your disc status such as available capacity a Move to 9 Track Edit and press OK b Select 3 Disc Info and press OK Track Edit 1 79 59 3 Disc Info gt Press OK CD R Use 27 53 Copyright 2005 by ILY Enterprise Inc All Rights Reserved OPERATING GUIDE 10 UTILITY This function group includes several Disc related functions You can press OK and press the up or down button to select the desired function 10 1 Pre scan This feature will help to check whether your Master Source Disc can be correctly duplicated a Select Utility and press OK 10 Utility b Select 1 Pre scan and press OK Utility gt Press OK Prescan 76 24 6 Prescan 76 24 eee _ s 20 15 30 rd Finished 10 2 Quick Erase This operation will erase your re writable discs in the Writer Tray When it is finished erasing the tray will automatically eject itself The duplicator can erase different types of re writable discs simul
5. the disc Afterwards it will analyze the discs and then start copying During the copying process the LCD screen will display the Master Source Disc s data size and copying progress e When the copying is finished the Writer Trays will automatically eject themselves 1 Copy 79 45 Press OK to load disc and Copy 79 45 7 discs detected execute copying gt Loading Disc Danalyzing Copy 79 45 gt Start Copy 79 45 e source disc gt Analyze Disc Copying gt 10 08 00 es gt r Note 2 If your duplicator has a HDD installed and if you would like to make Hard Drive to Disc copies please refer to 12 1 1 HDD Image Manger for more informationx 2 TEST a This function is a simulation of the COPY process The process is similar to the COPY function but the difference is that it won t write anything to the recordable discs b Press A or v to navigate the function menu to 2 Test and press OK c The system will auto detect the numbers of blank disc and start to simulate the COPY process However there is no data that will actually be written onto the blank disc d The purpose of this process is to ensure an error free duplication gt Press OK to load disc and 2 Test 79 45 i imulati Test 79 45 7 discs detected CASCUS CAPI P SIMUAUON Loading Disc gt Analyzing Test 79 45 gt Start Test 79 45 pai i source disc gt Analyze Disc Simulation gt 10 08 00 A
6. 2 Disc gt Image you will then to set the Reading Speed of reading the master source disc Image Manager 3 Reader Speed x Note this function is ONLY available when loading the Source Disc to a HDD Copyright 2005 by ILY Enterprise Inc All Rights Reserved OPERATING GUIDE 12 4 Image Info This function allows you to check image file information such as the Image file number Disc type and its file size Image Manager A Image Info 4 lmage Info gt press OK A001 DVD 4469MB Image Info A001 DVD 3875MB seee gt 3 875GB DVD disc image file A001 image info e gt CD disc image with 65 min A003 CD 65 28 28 sec file name A003 12 5 Delete Image This function allows you to delete a image file in HDD If the file has been selected as source file you will not be able to delete it unless you go back to 12 1 to re select other image as source Image Manager AL DELETE Image gt Select the image file you 5 Delete Image gt press OK A001 DVD 4469M would like to delete gt gt press Ok to DELETE Image gt press Ok and execute A003 DVD 4372M confirm gt A003 DVD 4372M delete gt DELETE Complete 12 6 HDD Info This function allows you to check the information of HDD such as how many discs are stored and the HDD s available space Used OCD 7DVD Free 41 CD 8DVD Image Manager 6 HDD Info D PES This feature will allow you to format the HDD However you will not be able to format th
7. Athena 1 to 7 targets CD DVD Duplicator User s Manual Version 1 0d enterprise Inc Copyright 2005 by ILY Enterprise Inc All Rights Reserved CONTENTS 1 INTRODUCTION 2 Features 3 Specifications 4 Hardware Installation Guide 5 Control Panel MENU OVERVIEW GUIDE 1 Copy 2 Test 3 Copy amp Verify 4 Copy amp compare 5 Verify 6 7 8 9 1 Compare Disc Burn Speed Select Source Audio Track Edit 0 Utility 10 1 Pre scan 10 2 Quick Erase 10 3 Full Erase 10 4 Eject All Disc 10 5 Disc Info 10 6 Drive Info 10 7 System Info 10 8 Update BIOS 11 Sep Up 11 1 Power On Time 11 2 Auto Start 11 3 Startup Menu 11 4 Write Method 11 5 Button Beep 11 6 Clear Setup 12 Image Manager 12 1 Select Image 12 2 Disc to Image 12 3 Reader Speed 12 4 Image Info 12 5 Delete Image 12 6 HDD Info 12 7 Format HDD 12 8 About HDD Manager Copyright 2005 by ILY Enterprise Inc All Rights Reserved 1 INTRODUCTION The Athena series duplicator is a stand alone CD DVD Disc Duplicator Controller that provides support for up to 7 CD DVD discs There are 8 IDE ports on the controller and each IDE port is independent from one another Therefore the controller can control several CD DVD devices at the same time The drives do not have to be of the same brand or speed The controller can support up to 7 discs duplicating simultaneously at maximum 56x CD writing and 16X DVD writing s
8. S This operation will update your duplicator s software You need to insert manufacturer s certified update CD 11 SET UP 11 1 Power On Time You can set the system warm up time from 5 sec to 255 sec after the system power is turned on 11 2 Auto Start This operation will allow the duplicator to automatically execute copying once your master source disc and all of writer trays are fulfilled with recordable discs You can turn the setting off or set the amount of seconds 1 99 it would take to activate this feature To execute this function you have to set the operation mode of COPY TEST VERIFY COPMARE COPY amp VERIFY COPY amp COMPARE 11 3 Startup Menu You can select which function in the menu will be shown first when you turn on the duplicator 11 4 Write Method You can select which mode to duplicate CD among DAO SAO and TAO The default mode is DAO which means Disc at Once 11 5 Button Beep You can choose whether to hear a beep when you press a button 11 6 Clear Setup Reset all of the operations back to manufacturer s default 12 IMAGE MANAGER This function will show you how to perform various Hard Drive related operations If your duplicator does not have a HDD installed the system menu will not show this function 12 1 Select Image Use to select an Image file as a Source to be copied to the discs 12 2 Disc gt Ima
9. You can go to check HDD information in function 12 6 HDD Info The Hard Drive s capacity is presented in terms of how many DVD or CD discs you can load For example if your built in HDD is 40GB then the system will show the HDD available capacity 8 DVD AOAO E EA AEEA EE O gt 40GB 5GB 8 40 CD AEE SE T EE TE gt AOGB 1 GB 40 x Note DVD is calculated by 5GB and CD is calculated by 1GB Every time you load a source disc the duplicator will auto detect the disc capacity and assign correct partitions for it For example if you loaded a 4GB double layer DVD disc into HDD as a disc image system will automatically detect and assign 4 partitions for it Dynamic calculate and display HDD capacity The duplicator will present your built in HDD capacity information dynamically depending on each time your loaded source disc s capacity For example before your load a 4GB DVD disc as source disc image your HDD information shows your HDD capacity is available for loading 5 DVD or 26 CDs However after loading a 4GB DVD the system will re calculate the total available partitions and show you how many DVD or CD discs that you can load as disc image next time Before load 4GB DVD HDD info Used 2 DVD 3CD ovr gt Note DVD indicates 5GB partition Free 5DVD 26CD and CD indicate 1GB partition After load 4GB DVD HDD info Used 3 DVD 3CD Free 4 DVD 22 CD Smart Image File Management When Discs are loaded into HDD as stor
10. ader 2 8 are writers Utility z 1 Port8 0 3 38 press A vto select 6 Drive Info gt Press OK Cy ROM Max 52X different Drives Copyright 2005 by ILY Enterprise Inc All Rights Reserved OPERATING GUIDE 10 7 System Info This feature provides information about the duplicator such as the controller model number RAM capacity and Firmware version Setup P727DVD 64MB 7 System Info a ies DNS Ver 1 00 10 8 Update BIOS This operation will update your duplicator s software You need to insert manufacturer s certified update CD a Turn on the duplicator and select 10 Utility and press OK b Insert a correct update CD to any Drive c Select 8 Update BIOS and press OK d The system will automatically start executing the firmware update When finished the update CD will automatically eject e In 2 sec the system will re boot The new firmware update is finished Setup AL Upgrade BIOS 8 Update BIOS insert update CD gt press OK Waiting Disc 2 Upgrade BIOS Start update o Start update eject Identify Disc 2 Writing 5 ZIS Pass CD New BIOS updated gt 2 Restart System 2 oye Temi repo gt Copyright 2005 by ILY Enterprise Inc All Rights Reserved OPERATING GUIDE 11 SET UP Use this function group to change the manufacturer s default setting 11 1 Power On Time You can set the system warm up time from 5 sec t
11. dio CD and blank CD R are recognized you will see the message of ready to press OK on duplicator LCD screen d Navigate the menu by pressing either button Al to find the desired track number and then press OK to confirm your selection Repeat the process to choose all the tracks you want to copy onto the disc You will see a letter a b c d shown on top of each selected track lt Track Edit Press OK gt ab c cde AL move A v and press 1234567 789100K gt Press OK gt to start 1 Copy Track OK to select tracks ni gt g e Once you finished selecting the tracks you want to copy you can pressi to move cursor to the end of the OK display And press Ok to confirm and submit your selection f Once you submit your selection you will see Copying Audio Tracks on your LCD screen g Once the Copying Audio Tracks process is complete you will be asked to finalize the CD Finalize NO Yes h If you have chosen NOT to finalize you need to go back to the first step to continue the process If you have chosen to finalize you will be directed back to main menu x Note Once you finished copy Audio Track you will NEED to perform 9 2 Close Disc function for your audio CD If you do not your audio CD will NOT be able to play in a CD player 9 2 Close Disc Use this process to make a CD R CD RW disc become a playable Audio CD
12. discs or bad source discs ys Support for a Verification function to ensure copied disc s readability ys Supports all major disc types X Auto detect source disc ys Can set button beep on or off x Firmware is easily updateable Just place an update CD in any drive and within a few seconds the firmware is quickly updated Copyright 2005 by ILY Enterprise Inc All Rights Reserved 3 SPECIFICATION Power Voltage 5V 5 Current 0 7A Max Environment Working Temperature 0C 75C Storage Temperature 20 C 85C Humidity Working Humidity 20 80 Storage Humidity 5 95 Dimension Length 176 mm Height 42mm Width 146 mm Model Max Burn CD Max Burn DVD Buffer Memory Total IDE Port SPEED SPEED Size Number Athena CD 56X No 16 64 MB 8 Athena DVD 56X 8X 16X 64 MB 8 Copyright 2005 by ILY Enterprise Inc All Rights Reserved 4 HARDWARE INSTALLATION GUIDE This section will show you how to set IDE devices as the Optical READER WRITERS and Hard Drives The system will auto detect your drives and assign Drive numbers READER WRITER HDD System Setting Information 1 installed Installed No After you turn on the machine the system will automatically detect and assign the READER drive as the Source Reader and set as Drive 1 All WRITERS will be set numbered by sequence after the READER drive beginning from Drive 2 Drive 3 etc 2 No Installed jNo A
13. e SET BURN SPEED This operation will allow you to adjust and select Duplication Speed for three different disc types CDs audio CDs and DVDs SELECT SOURCE To set the Master Reading Source as Optical Drive or Hard Drive Disk AUDIO TRACK EDIT This is to make Audio Tracking Selection This will help you to combine audio tracks from various CDs into a single customized audio CD 10 UTILITY 10 1 Pre scan This feature will help to check whether the Master Source Disc can be correctly duplicated 10 2 Quick Erase This operation will erase your re writable discs in the Writer Tray 10 3 Full Erase This operation will completely erase your re writable discs in the Writer Tray It takes longer time than Quick Erase 10 4 Eject All Disc Eject all discs including master source disc and all of disc in writer tray 10 5 Disc Info This feature will allow you to check disc s basic information such as disc type data length and available space 10 6 Drive Info This feature will allow you to check the duplicator s major component information such as the manufacturer Writer or Reader model numbers and versions Copyright 2005 by ILY Enterprise Inc All Rights Reserved 10 7 System Info This feature provides information of the duplicator such as the Controller model number Buffer memory capacity and Firmware version 10 8 Update BIO
14. e HDD if the HDD 12 7 Format HDD image was selected as Reading Source You have to go to 8 Select Source to select the Optical Drive as Reading Source in order to format HDD Image Manager AL Caution 7 Format HDD oles OK gt Format HDD gt press OK to Format HDD gt press OK to confirm Format HDD confirm format Confirm Again and start executing f gt Complete A Copyright 2005 by ILY Enterprise Inc All Rights Reserved 12 8 ABOUT HDD MANAGER Our duplicator uses highly intelligent and dynamic HDD management technology The traditional method of formatting a HDD requires that you have to decide the number of partitions designated for DVDs and CDs before you format your hard drive However the problem is that you might not be able to accurately predict how many DVDs or CDs you will load onto your hard drive You could potentially create many incomplete partitions especially since there are new DVD discs coming out constantly such as the double layer DVD You need a smarter and more dynamic way to manage your HDD and our HDD manager can do that for you Our Dynamic HDD Manager has following special features I Auto Detect Disc Capacity and Dynamically Assign Partitions 1 2 When you first format your built in HDD our duplicator will automatically divide the HDD into 1GB partitions You will not have to select DVD or CD partition in the beginning
15. ed disc images the system will assign a file name to the image file beginning from A001 sr Note Every time a new disc image is loaded the system will automatically search and assign the lowest number as the file name For example if there are not deleted files the file name will be assigned in sequence beginning from A001 However if there a file is deleted such as A003 then the file name will be held When the next time there is a new disc image stored the lowest number of A003 will be assigned as this new disc image s file name Copyright 2005 by ILY Enterprise Inc All Rights Reserved 2 You are allowed to delete an image file by executing 12 5 delete image Once you delete an image file the file name will be left empty and held for a future loaded image file The existing file name will not be changed or moved ahead due to the deletion 3 You can check your image file information in function 12 4 Image Info The image information will present the image file name Disc type and file size image info sete gt 3 875GB DVD disc A001 DVD 3875MB image file A001 image info CD disc image with 65 min 28 sec file A003 A003 CD Copyright 2005 by ILY Enterprise Inc All Rights Reserved
16. fter you turn on the machine the system will automatically assign the WRITER drive connected to Port 1 of the controller as the Source Reader and set as Drive 1 The rest of the WRITERS will then be set as Writers and will be assigned numbers following their sequence beginning from Drive 2 onwards 3 No Installed Installed After you turn on the machine the system will automatically assign the WRITER drive connected to HDD the Source Reader function It will be assigned Drive 1 Then the rest of the WRITERS will be set as Writers and assigned numbers in sequence beginning from Drive 2 Drive 3 etc 4 Installed Installed Installed When all Drives are installed make sure the READER drive is connected to the HDD The READER will be set as the Source Reader and be assigned as Drive 1 WRITERS will be set as Writer and assigned number by sequence from Drive 2 Drive 3 etc 5 LCD FRONT PANEL 1 Control Buttons There are 4 control buttons A v OK Cancel A UP Backward Use this button to navigate backward in the menu v Down Forward Use this button to navigate forward in the menu OK OK Enter Execute the function Cancel Escape Go back to previous function 2 LCD Display The LCD display is a 2x16 Mono LCD screen The system will display function information messages and instructions on the LCD Copyright 2005 b
17. ge Use to copy a Source Disc to HDD to save as an Image file 12 3 Reader Speed When you go to this function 12 2 Disc gt Image function you can set the Reading Speed of the master source disc 12 4 Image Info Checks the image file information and file size 12 5 Delete Image Use this function to delete an image file in HDD If the file is selected as the source file you will not be able to delete it unless you go back to 12 1 to re select the image 12 6 HDD Info Checks the information in HDD such as the number of discs stored on the HDD and the amount of space left in the HDD 12 7 Format HDD This feature will allow you to format the HDD However you will not be able to format the HDD if the HDD image was selected as the source Copyright 2005 by ILY Enterprise Inc All Rights Reserved OPERATING GUIDE 1 COPY This operation will show you how to copy a Master Reading Source to a blank CD DVD disc Please ensure that the Master Reading Source is set as the READER if you would like to make Disc to Disc copies a Turn on the duplicator before you start to copy and please make sure you have set the correct reading source and blank discs b The system will automatically detect and display how many blank discs were detected c When the system is ready to copy just press OK to execute CD DVD copies d When the system starts the copying process it will first start loading
18. is operation is to ensure all of your copies have the same exact information as your Master Reading Source a Put master source disc and all copied discs into the duplicator b Press OK The duplicator will automatically start loading the disc analyzing the source disc and start the Comparison function Cc When the Comparison is finished the duplicator writer trays will automatically eject themselves 6 Compare AW Compare 79 45 7 discs detected ie eleee OK opad aisea Loading Disc Compare 79 45 gt Start Analyze Disc Comparison Note You can ONLY use the compare function when you are duplicating DATA discs x gt Analyzing source disc Compare 79 45 gt 100 Finished and 45 35 45 eject disc Copyright 2005 by ILY Enterprise Inc All Rights Reserved OPERATING GUIDE 7 SELECT SPEED This operation will allow you to adjust and select the Duplication Speed for the three different disc types CD Audio CD and DVD v to navigate the menu 7 SELECT SPEED and press OK v to select a disc type and a Press either button A b You will see three disc types CD Audio CD and DVD Press either button A press OK to confirm your selection Cc Press either button A v to select the burning speed Press OK Burn Speed Setting normal c amp gt CD 52 z data CD lal v burning speed K v Bu
19. o 255 sec after system power on a Select 11 Set Up and press OK b Select 1 Power On Time and press OK c Press A v to increase or decrease the seconds Setup Ad Power On Delay press A V to set 1 Power On Time gt pressOK gt 15 seconds seconds 11 2 Auto Start This operation will allow the duplicator to automatically execute copying once you place your source disc in your master source drive and recordable discs in any of your writer trays You can disable the auto start function or turn it on along with the time 1 99 seconds it would take to activate this feature To execute this function you have to set the operation mode of COPY TEST VERIFY COMPARE COPY amp VERIFY COPY amp COMPARE for auto start copying Setup Az Auto Start gt press JA y to set 2 Auto Start press OK gt 3 seconds seconds x Note If you set the function off the LCD screen will not show how many blank discs are detected in writer trays 11 3 Startup Menu 3 1 1 You can select which function in the menu to see first when you turn on the duplicator Setup rave Startup Menu gt move Ally to select 3 Startup Menu Ppress OK 1 Copy Disc function 11 4 Write Method You can select which mode to duplicate CD among DAO SAO and TAO The default mode is DAO Disc at Once Unless you understand completely what they mean we strongly suggest you to set it a
20. peeds The easy to use operating control panel consists of a LCD screen and 4 buttons All operating messages and information such as the function list instructions operating status or error message s will display in real time on the screen The built in Hard Drive will allow users to load many CD DVD Master Source Discs onto the HDD as source disc images Loading a disc image onto the HDD will reduce the risk of damaging the Source Disc due to heavy duplicating jobs An intelligent and dynamic HDD management system will dynamically assign HDD partitions to each CD DVD disc image loaded onto the HDD according to their actual capacity requirement This smart HDD manager will ensure a flexible and efficient HDD management 2 FEATURES x 1 to 7 IDE to IDE CD DVD Disc Duplicator Controller x Auto detect IDE devices x 2x16 LCD display and 4 control buttons ys Supports up to max 56x CD duplication 8x 16x DVD duplication yw Flexibility in setting different duplication speeds based on various Disc writers x It is easy to select any Drive as the Master Reading Source ys Support for an IDE Hard Drive Device You can load master source CD or DVD discs onto the Hard Drive as a disc images ys Support for Audio Track editing Combine your favorite audio tracks into one customized CD Xx Special Pre Scan feature can evaluate the master source disc before copying X Support for copying simulation to prevent any failures caused by bad blank
21. rify 79 45 gt 100 finished start verification gt 45 35 45 and Eject discs xx Use verification make a Disc Readability Check This operation will check your master disc and the copied discs readability to make sure all of your copies are readable ao f COPY amp COMPARE This operation will make copies and after copy process has been finished it will continue a Comparison process automatically to ensure data correctness Therefore the duplicator will not eject discs until a disc Comparison is done correctly This operation will directly copy the Master Source onto a blank CD DVD disc Before you start this menu to copy please make sure you have put correct reading source and blank discs The system will automatically detect and display how many blank discs are detected When the system is ready to copy just place OK to execute CD DVD copies When the system starts the copying process it will first start loading the disc Afterwards it will analyze the discs and then start the copying process During the copying process the LCD screen will display Master Source Disc s data size and copying progress When finished the system will automatically continue Comparison process to ensure the discs are exact copies of the master source When the Comparison is finished the Writer Trays will automatically eject the discs 4 Copy amp Compare ON Copy amp Compare 7 discs detected gt Press OK to load discs Loading Disc
22. rn Speed gt Setting Audio gt A v gt Press CD burning Audio CD 40 OK speed _ Burn Speed gt Setting DVD Note This is only gt M gt DVD 8 Press burning available on DVD OK speed duplicators 8 SELECT SOURCE Use this function to set a Optical Drive or Hard Drive Disk as the Master Reading Source a Move to 8 Select Source and press OK b Press A v to select either a HDD or an Optical Drive with assigned number as the reading source 8 Select Source AA Source Drive gt gt movelA v souice Drivea gt Press OK to to select gt D 1 DVD ROM finished setting gt Note If HDD was selected as Source then please follow 12 1 Select Image s instructions to learn how to select image files as your reading source x x Note Each Optical Drive will be assigned a Drive according to their installation sequence If there is no HDD installed then Drive 1 is set as the Reading Source Copyright 2005 by ILY Enterprise Inc All Rights Reserved OPERATING GUIDE 9 AUDIO TRACK EDIT This process will show you how to select audio tracks from various audio CDs and combine them into one customized Audio CD 9 1 Select and Copy Track a MovelA v to 9 Audio Track Edit menu 9 Track Edit b Insert an Audio CD with your favorite tacks in the Reading drive and Insert ONLY ONE Blank CD R disc into one of the writers c As soon as both au
23. s Disc at Once Setup Write Method A 4 Write Method prose ORS DAO gt move 11 5 Button Beep You can choose whether to hear a beep when you press a button or not Setup Button Beep gt move alv to select 5 Button Beep P press ON ON ON OFF 11 6 Clear All Reset all of the operations back to manufacturer s default settings Setup gt press OK clear all setting you have done and return 6 Clear Setup back to manufacturer s default setting vito select Copyright 2005 by ILY Enterprise Inc All Rights Reserved OPERATING GUIDE 12 IMAGE MANAGER For Duplicator with HDD Installed This function will show you how to perform various Hard Drive related operations If your duplicator does not have a HDD installed the system menu will not show this function Please refer to 12 8 ABOUT HDD MANAGER to get more information about the special function and advantages about this feature 12 1 Select Image This function will show you how to select an Image file as a Source that you can copy to discs This function is required when you would like to make a copy from your HDD to blank dscs Please refer to 12 1 1 for instructions regarding making Hard Drive to Disc Copies Image Manager Select Image move JA gt press OK A001 DVD 4469M Jy to gt select and press OK to confirm 1 Select Image
24. taneously You can place the re writable disc you would like to erase in any tray Utility insert re writable discs and 2 Quick Erase press OK gt x Note If you see O o take turns blinking it means Erasing is in processing If you see F f take turns blinking it means DVD RW Disc Formatting is in processing Quick Erase Disc gt Erasing done _O___ O_o and eject discs 10 3 Full Erase This operation will completely erase your re writable discs in the Writer Tray It will take more time than the Quick Erase function When finished the writer will automatically eject the trays Utility gt Insert re writable disc and Full Erase Disc E gt Erasing 3 Full Erase press OK gt Or 0 eh eject 10 4 Eject All Discs Use to eject all discs including master source disc and all of discs in writer trays Utility TA l 4 Eject All Disc Press OK Eject all discs 10 5 Disc Info This feature will allow you to check disc s basic information such as the disc type data length and available capacity Utility a 1 79 59 5 Disc Info press OKS CD R Use 27 53 10 6 Drive Info Use this feature to check the duplicatorss major component information such as its manufacturer Writer or Reader model number and version a Press OK and then press up or down to check each Drive s model number and information b The duplicator will assign each drive a number from 1to 8 1 is Re
25. y ILY Enterprise Inc All Rights Reserved Copyright 2005 by ILY Enterprise Inc All Rights Reserved MENU OVERVIEW COPY Use this function to make a CD DVD copy Before you start use this function please make sure you place the correct reading source and blank discs The system will automatically detect and display how many blank discs are detected When the system is ready just place OK to execute CD DVD copies TEST This is copying process simulation function The process is the same as COPY but it won t write anything to the recordable disc The purpose of this process is to ensure an error free duplication COPY amp VERIFY This operation will make copies and after the copy process has been finished it will continue a Verification process automatically to ensure data correctness COPY amp COMPARE This operation will make copies and after copy process has been finished it will continue a Comparison process automatically to ensure data correctness VERIFY Use this function to make Disc Readability Check This operation will check your master discs and the copied discs readability to make sure all of your copies are readable COMPARE DISC Use this function to make a bit by bit Comparison between the Master Reading Source and all the copied discs inside the writer trays This operation is to ensure all of your copies have the same exact information as your Master Reading Sourc
Download Pdf Manuals
Related Search