LaserMETER 3000XP - Electrocomponents
Contents
1. damage resulting from unauthorized adjustments to or dismantling of the camera or for use with inappropriate applications or environments Trademark Information Microsoft and Windows are U S registered trademarks of Microsoft Corporation Pentium is a registered trademark of Intel Corporation Macintosh is a trademark of Apple Computer Inc SD is a trademark Other names and products may be trademarks or registered trademarks of their respective owners Product Information Product design and specifications are subject to change without notice This includes primary specifications software software drivers and user s manual The User Manual is a general reference guide for the product The manufacturer assumes no liability for any errors or discrepancies in the user manual 2 SPECIAL CONDITIONS OF SAFE USE as defined by clause 29 2 i of EN 60079 0 The conditions referenced in this section relate specifically to hazardous area applications and must be followed In accordance with clause 5 1 of EN 60079 1 the critical dimensions of the flamepaths are Flamepath Maximum Gap mm Minimum L mm Main body cover 0 04 11 0 Main body battery pack 0 04 10 0 Front Lens main body 0 1 13 8 Top lens main body 0 1 13 8 e This equipment must only be used where there is a low risk of mechanical impact e The equipment is manufactured in aluminium alloy in Group applications this2. CorDEX INSTRUMENTS SAFER FASTER BETTER LaserMETER 3000XP INSTRUCTIONS FOR SAFE OPERATION CorDEX Instruments Ltd Email sales cord ex com Web www cordexinstruments com Document Number ID 2105 Revision A Ex 2 CONTENTS READ THIS 5 1 Trademark Product 42 anna nnnnnnas SPECIAL CONDITIONS OF SAFE OPERATIONAL CERTIFICATION esse EC Declaration of 235 a IECEx Certificate iu en The LaserMETER 3000XP is an explosion proof laser measurement device suitable for use in hazardous areas Ex zones potentially explosive environments Read and understand all Warnings and Cautions before using this product Liability The technical specification of the camera complies with relevant European Ex standards EN 60079 0 and EN60079 1 The user is solely responsible for ensuring the equipment is suitable for the intended purpose and environments CorDEX Instruments will not be liable for any injury or
3. equipment must not be utilised where there is a risk of thermite reaction frictional ignition e The LaserMETER 3000XP must only be recharged in a non hazardous area e Extreme Care should be taken to ensure that no damage occurs to the flamepath between battery and casing Ensure dowel location pins are engaged fully before tightening locking screws e LaserMETER 3000XP incorporates a protected battery system with a replaceable fuse This Fuse is only to be replaced with CorDEX Instruments Type CDX2341 120 fuse Failure to do so will void the certification e Ensure that the LaserMETER 3000XP battery pack is secured using the screws provided If the screws are lost only replace with screws of the correct size and type If in doubt contact your nearest CorDEX Instruments representative e LaserMETER 3000XP is manufactured from aluminium alloy with less than 7 magnesium by weight and incorporates toughened glass windows This should be taken into account when considering the end use application e The LaserMETER 3000XP cannot be maintained in the field and must be returned to the manufacturer should repair or maintenance be required 3 OPERATIONAL CAUTIONS The cautions contained in this section do not relate specifically to safe use in hazardous area applications but should be followed to help prevent damage to the camera or personnel e Do not fire the Laser close to anyone s eyes This might cause damage to the person s ey
4. esight e Keep out of the reach of children A Laser is a precision instrument Do not drop it strike it or use excessive force when handling the Laser This might cause damage to the device e Do not wrap the Laser or place in cloth blankets 4 CERTIFICATION Model LaserMETER 3000XP Certificate No Sira 08BATEX1293X IECEX SIR 10 0133X Certificate E Type 0518 II M2 2G_ Exdl Exd IIC T4 Ambient Tamb 20 C to 50 C Temperature Power Battery Pack CDX2341 007 Supply EC Declaration of Conformity We hereby confirm the conformity of the equipment listed below with the directives of the Council of the European Community The safety and installation instructions of the product documentation must be observed Model LaserMETER 3000XP European Standards and Directives Low Voltage Directive 73 23 EC EN60950 94 9 EC EN60079 0 EN60079 1 ATEX Certificate IECEx Certificate
Download Pdf Manuals
Related Search