ENG - Manual Hepro Elektro Kilo - English
Contents
1. HEPRO easy life Elektro Kilo Manuel Elektro Kilo Jachtwagen 29 3897 AM Zeewolde Netherlands 8431 0 36 53 53 580 amp 31 0 36 522 30 46 amp infoeprestonability nl www prestonability nl H EPRO Manuel Elektro Kilo easy life HEPRO The manufacturer of technical aids for adults and disabled HEPRO is a Norwegian industrial company developing producing and marketing technical aids for disabled persons The company was established in 1987 and employs about 50 people The main office and factory is located in Rognan Norway Technical service Technical support is given both from the head office and our sales representatives to secure first class service when needed Special adaptations Hepro is able to offer individual adaptations of the products when necessary Special adaptations to satisfy individual needs is a part of the daily tasks at the factory If adaptations are requested our sales represen tatives can be contacted Guarantee When the product is used in accordance with the User Instructions Hepro gives two years guarantee on material and production faults The serial number of the chair must be given as reference by complaints or product applications The product is designed developed tested and approved in accordance with the following standards of demands EN 1441 Medical Devices Risk analysis EN 12182 Technical aids for disabled persons General requirements EN 12. 335 Office furniture Office work chair Part 1 2 and 3 EN 1021 1 2 Ignitability of upholstered furniture smouldering cigarette light fire EN 60601 1 2 EMC test of Medical electrical equipment Nordic specification of demands for work chairs functional demands Edition 2000 05 31 Directive 93 42 EEC The product is branded CE Jachtwagen 29 3897 AM Zeewolde Netherlands 8431 0 36 53 53 580 amp 31 0 36 522 30 46 hinfoEprestonability nl 8 www prestonability nl HEPRO T Manuel Elektro Kilo easy life TABLE OF CONTENTS 0 General Page 4 0 1 Brief product description 0 2 Safety regulations 0 3 Warning 1 1 Instructions for use 1 1 1 Mounting 1 1 2 Regulation and operation of the seat unit 1 1 3 Operating the brake function 1 1 4 Regulation and operation of the armrests 1 1 5 Battery charge ELEKTRO models 1 1 6 Fault indications and check out 1 1 7 Application by faults 1 2 User manual 1 2 1 Model and type information 1 2 2 Technical specifications 1 2 3 Supplement information about use 1 2 4 Cleaning executed by the user 1 2 5 Positioning the brake lever 1 2 6 Adjustment of armrest width 1 2 7 Maintenance executed by the user 1 2 8 Adjustments 1 2 9 Storage when the product is not use Jachtwagen 29 3897 AM Zeewolde Netherlands 8431 0 36 53 53 580 amp 31 0 36 522 30 46 hinfoEprestonability nl 8 www prestonability nl HEPRO Manuel Elektro Kilo
3. a screwdriver The new cushion is snapped on A snap sound is heard when the snap lock is secured The seat cushion is fixed with screws directly to the seat base In order to remove it the screw under the seat must be unscrewed 1 2 9 Storage when the product is not use If the work chair is supposed to be stored for a long period of time it should be cleaned and placed on a dry place Cover the chair if necessary When the chair is not in use it should be recharged at least once a month Jachtwagen 29 3897 AM Zeewolde Netherlands 7831 0 36 53 53 580 amp 31 0 36 522 30 46 hinfoEprestonability nl www prestonability nl easy life Qvermoan 9 8250 Rognan Tel 0047 0 75 69 47 00 Fax 0047 0 75 69 47 10 export hepro no Norway Preston Ability Jachtwagen 29 3897 AM Zeewolde Tel 0031 0 36 53 53 580 Fax 0031 0 36 522 30 46 info Qprestonability nl Netherlands Jachtwagen 29 3897 AM Zeewolde Netherlands 7831 0 36 53 53 580 amp 31 0 36 522 30 46 amp infoeprestonability nl 8 www prestonability nl
4. d for the adjustment Loosen the setscrew on the underside of the adaptor so that the adaptor can be positioned as de sired Verify that the brake lever is free from the chair after the removal Secure the setscrew firmly The hexagon key is replaced below the seat BRAKE LEVER SIDE POSITION The brake lever is mounted on the right side as standard If the user wants to move the lever to the left hand side do the following Pull off the lever The adaptor is loosened as described in Brake lever position above and moved to the left hand side Replace the brake lever Placing and fastening is done as described in Brake lever position above 1 2 6 Adjustment of armrest width The armrest is mounted in a slot below the seat cover and fastened with 2 setscrews Changing of armrest width often lead to moving of the brake lever If an armrest width different from the pre regulated is desired do the following Use the hexagon key fastened below the seat for the regulation Loosen the two setscrews below each armrest The extreme screw is placed into a slot in the armrest and serves as a safety catch to avoid the arm rest from slipping out and fall off in case of loosening The length of the slot limits the width adjustment The armrests are moved to the desired position The setscrews on both sides are firmly secured The hexagon key is fastened below the seat Jachtwagen 29 3897 AM Zeewol
5. d operation of the seat unit Regulation of the seat unit Backrest height Press the locking bow 1 and adjust the backrest to the desired height position Barbs ensure that the backrest can t involuntary be removed Backrest angle Lift the handle 2 to regulate the backrest angle and release the handle to lock the desired position Sittehoyde The toggle switch 5 operates the electrical seat lift The seat height is raised when the switch is pushed forwards The seat height is reduced when the switch is pulled backwards 1 1 3 Operating the brake function The brake lever operates the brakes on the rear wheels The brake lever By lifting the lever 15 the brakes are activated Pushing the lever downward release the brakes The chair can be delivered with opposite working brakes if desirable Jachtwagen 29 3897 AM Zeewolde Netherlands 7831 0 36 53 53 580 amp 31 0 36 522 30 46 hinfoEprestonability nl 8 www prestonability nl H EPRO Manuel Elektro Kilo easy life 1 1 4 Regulation and operation of the armrests ARMREST COMFORT The armrest can be height adjusted and lifted Height adjustment By twisting the wheel anticlockwise 18 the armrest can be adjusted into the desired height Secure the desired position by turning the wheel 18 clockwise Lifting Push the handle 19 forwards to release the locking mechanism and lift the armrest When tilting backwards
6. de Netherlands 7831 0 36 53 53 580 amp 31 0 36 522 30 46 hinfoEprestonability nl www prestonability nl H EPRO Manuel Elektro Kilo easy life 1 2 7 Maintenance executed by the user The user should execute cleaning and vacuum cleaning of the chair 1 2 8 Adjustments BRAKE LEVER LOCKING FORCE The power that locks the rear wheels when the brake is activated can be adjusted Unscrew the screw placed on the rear wheel fork body Twisting the ring over the bearing 180 will increase clockwise or decrease anticlockwise the lock ing force When the desired locking power is found the screw is replaced MOUNTING OF FOOT SUPPORT KILO RING Remove the plastic plugs on the wheel base front arms by the help of a screwdriver Remove the rubber bands from the expansion bolt before mounting The foot support hinge is pushed down onto the wheelbase Secure the hexagon screw to lock the foot support The foot support must be mounted so that the head of the expansion bolt in not visible when the foot support is tilted forwards Dismount by loosening the screw 2 3 turns and kick it down The expansion effect ceases and the foot support including the expansion bolt can be pulled off Make sure that the expansion casing parts do not fall out CUSHION EXCHANGING The backrest cushion is fastened with snap lock The cushion is removed by bending is loose from the bottom cover Use your hands or
7. easy life 0 General 0 1 Brief product description Elektro Kilo is a work chair tested and approved in accordance with northern specification of demands for maximum 230 kg user weight The wheelbase has four arms and is welded and lacquered with black coat ing powder which provide a robust and durable surface The seat unit is mounted on a lifting pillar with an embedded actuator The wheels have wide tracks 125mm diameter The rear wheels have hand oper ated central brake that locks both rolling and rotation Hjulene har bred bane og diameter 125mm The seat unit is based on the standard seat base but the seat angling is removed Cushions The backrest cushion is exchangeable but the seat cushion is fixed to the seat plate Regulations Seat height backrest angle backrest height and armrest height Adjustments Armrest width and brake lever positioning 0 2 Safety regulations The chair is an aid and shall not be used as a toy for children Exceeding approved user weight can be dangerous for the user or damage the chair If you notice that the chair does not function as described or as you are used to contact your local representative 0 3 Warning If Foot Support is mounted the user must not stand on those The chair will probably overturn The foot support is for leg resting only The seat height must not be heightened with more distance rings to a higher position than stated in section 1 2 2 Even if t
8. he upholstery is flameproof is must not be exposed to open fire the light of a cigarette or similar Maintenance beyond the descriptions in section 1 2 7 Maintenance executed by the user shall be taken care of by your local representative or an authorized service company 1 1 Instructions for use 1 1 1 Mounting UNPACKING Remove the packing by Cut the tightening straps Remove the top cover Remove the side carton cover Lift the chair out of the carton bottom Remove the plastic protection from the wheels Jachtwagen 29 3897 AM Zeewolde Netherlands 8431 0 36 53 53 580 amp 31 0 36 522 30 46 hinfoEprestonability nl 8 www prestonability nl HEPRO E Manuel Elektro Kilo easy life BACKREST MOUNTING The chair is delivered with the backrest dismounted Mounting Remove the plastic protection Place the backrest carefully down onto the backrest pillar Press the locking mechanism for height adjustment When having the regulation button pressed inn the backrest is pressed into the lowest position The backrest is now correctly mounted By operating the regulation button the backrest can be adjusted to the desired height BRAKE LEVER MOUNTING All models are delivered with the brake lever dismounted The lever is thread down onto the adaptor mounted on the hexagon bar between the rear wheels FOOT SUPPORT KILO RING MOUNTING Described in section 1 2 8 Adjustments 1 1 2 Regulation an
9. tem number Model 18090311 ELEKTRO Kilo Standard 1 2 2 Technical specifications Nominal values in standard execution based upon measurements in accordance with methods stated in EN 1335 je Ta Bacieest Angle adusimen e 59 25 MATERIALS AND COMPONENTS Wheel base Powder coated steel Backrest covers Moulded plastics Backrest cushion Moulded PUR foam Seat Seat plate made of waterproof 15mm plywood PURFoam laid on Upholstery Furniture fabrics 10096 Trevira CS Central unit Aluminium pillar with embedded actuator Front wheels Steel fork and ball bearing wheels 125mm with PURtrack Back wheels Steel fork with built in locking function and 125mm ball bearing wheels w PUR track Jachtwagen 29 3897 AM Zeewolde Netherlands 8431 0 36 53 53 580 amp 31 0 36 522 30 46 Yminfo prestonability n 8 www prestonability nl H EPRO Manuel Elektro Kilo easy life 1 2 4 Cleaning executed by the user The upholstery can be washed at 600 C or cleaned with foam detergents All frame parts can be cleaned with a damp cloth and mild soap All parts and spaces can be vacuum cleaned 1 2 5 Positioning the brake lever BRAKE LEVER POSITION To amend the position of the brake lever the position of the adaptor has to be changed The adaptor is fastened to the hexagon bar with a setscrew on the underside of the adaptor To change positioning the following must be done The hexagon key fixed below the seat is use
10. the armrest A click sound is heard and the armrest is secured 1 1 5 Battery charge BATTERY CHARGE The battery shall only be charged with the enclosed 24V charger The charger is connected to the outlet 12 located on the box with the toggle switch for height adjustment see page 5 A beep sound indicates when the battery needs recharging The enclosed charger stops charging when the battery is fully charged The battery should be recharged regularly preferably every day when in daily use When the chair is not in use it should be recharged at least once a month The seat can be lifted lowered during charging 1 1 6 Fault indications and check out If any of the functions don t work check the following Is the problem visible and obvious Loose components or cables must be replaced Verify that the battery is charged If the problem is still unsolved see section 1 1 7 1 1 7 Application by faults If faults or problems occur you shall apply to the representative or local supplier of the product On applying always state serial number which is to be found on back of the seat base right hand side Jachtwagen 29 3897 AM Zeewolde Netherlands 7831 0 36 53 53 580 amp 31 0 36 522 30 46 hinfoEprestonability nl 8 www prestonability nl HEPRO Manuel Elektro Kilo easy life 1 2 User Manual 1 2 1 Model and type information The user manual covers the following types and models I
Download Pdf Manuals
Related Search