Home

USER MANUAL

1. c E de S 0 2 je 10 Only use the attachments accessories specified by the manufacturer 11 Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus Recording Operation ve Maintenance and Service Important Safety Instructions 12 Unplug this apparatus during lightning storms or when unused for long periods of time 13 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way This symbol indicates that dangerous voltage instituting a risk of electric shock is present within this unit This symbol indicates that there are important operation and maintenance instructions in the literature accompanying the appliance NOTE a To prevent damage which may result in fire or hazards the unit should not be exposed to rain or liquids b Do not place objects containing liquids such as vases on the unit If drinks or liquids have been spilled on the unit unplug the unit from the power source and refer to TEAC service personnel for assistance C Servicing of this unit should be conducted by qualified and certified TEAC service personnel d The manufacturer will not be held responsible for any damage caused by any modifications done on the product without authorisation from the manufacturer s authorised service agent B
2. E 2 While in HDMI input press this button to change between Video and PC mode 3 While in VGA PC input press to auto align screen MENU Press to display the OSD menu EXIT Press to exit the OSD menu CURSOR KEYS A V gt OK Allows you to navigate through the on screen menus and adjust the system settings to your preference EPG To show the Electronic Program Guide 5 0 A Y O Se a e EE Sl al INFO Press to display the current mode s information E S E E CH A Channel Program 20 KE Oo VOL lt gt Volume Not available in DVD Input mode A x MUTE Press to mute the sound press again or press VOL to unmute SN MEDIA db O Enter to DVD mode Aspect Subtile Audio D Setup 3D No function Recording Operation 240602000542 Maintenance and Service 10 Remote Control INPUT Picture Sound Sleep 3D Buttons for USB DVD operation eo REC Press to start recording the program in DTV mode Press REC to select the repeat mode in DVD and USB Mode Load eject DVD disc Stop program Previous chapter Next chapter I Play Pause program 44 Fast reverse gt gt Fast forward MEDIA Enter into media mode Basic Operation Jm 5 g Q a Y O ASPECT Adjust picture size SUBTITLE Select available subtitles in DTV and DVD mode gt MEDIA EN Audio Select different audio languages subject to availability from broadcaste
3. 24 bit 32 bit The max PHOTO resolution is 3000x3000 pixels min resolution is 100x100 pixels MUSIC Sample rate 8K 48K Bitrate 32K 320K Special note 1 The Media Unit can only support USB memory devices such as hard disk drives and flash drives and will not support multimedia devices such as mobile phones and cameras for recording purposes 2 Unit will only support hard disk drives with additional power supply maximum disk partition size of 400GB and a maximum capacity of 1 5TB For optinum performance it is highly recommended that a hard disk drive with an external power supply be used for larger capacities 3 The maximum number of files that each folder can contain is 5000 files 4 When using external USB it is suggested that high quality USB extension cables supported 480mHz be used to ensure smooth playing of video files 5 The television unit can only support audio formats of single and binary channels 0 o Oo T F co wf Es oS Sos 47 TEAC In the event of a product failure within the warranty period please call the TEAC Warranty Service Hotline 1300 553 315 Between Monday to Friday 8 30AM to 5PM AEST Please have your purchase receipt and the product s serial number ready For other enquiries and support please email support teac com au
4. 4 JA i AA A 7 OSD Menu Be sure to place the unit ona level surface Do not cover the unit with a tablecloth curtain or other material e Insufficient ventilation may result in the unit overheating which may cause a possible fire outbreak Install the unit at an adequate distance from the wall to ensure sufficient ventilation Insufficient ventilation may result in the unit overheating which e may cause a possible fire outbreak Se HE Lo ES g 5 so Recording Operation The following precautions are divided into Warnings and Cautions M4 Disconnect this device from power by turning the power off at the AC power outlet and unplugging the AC plug Warning Ignoring this precaution may result in death or serious injury Caution Ignoring this precaution may result in injury or property damage Maintenance and Service Use and Maintenance Although the LED screen is made with high precision technology and 99 99 or more of the pixels are effective black dots may appear or bright points of light red blue or green may appear constantly on the LED screen This is a property of the LED screen and is not a malfunction Warnings Disconnect the power cord from DO NOT insert any metal DO NOT allow children to climb DO NOT dismantle or modify the the power source during a objects such as a screwdriver onto the unit _ unit in any wa
5. for an extended period of time 3 4 5 hours Free Record Limit Select recording time from 1 hour to 6 hours Note 1 This applies only to manual instant recording 2 Recording will stop once it reaches the maximum set time Maintenance and Service 20 OSD Menu OSD Language Select the language option for the OSD menu Audio Languages can be selected in DIV mode Allows you to select first and second audio language Subtitle can be selected in DIV mode Allows you to select first and second subtitle language Teletext Adjust Teletext settings Only available under DTV and ATV source Blue Screen Turn on off the blue screen HDMI CEC Control Turn on off HDMI CEC Control DVR Settings Use the wa buttons to select the DVR Settings then press OK to enter For more about DVR Settings please see Recording Operation Recorded List Display and maintain the list of recorded programs Device List Display the connected USB device with the Format option Schedule List Display the list of scheduled recordings and reminders OAD Display a menu to check for new firmware available on broadcast System Info Display system information Restore Factory Default Select to erase all custom settings and return to factory defaults If Lock is enabled this requires password access 21 go D O E Operation Recording Operation Maintenance and Service Multimedia Operation USB Usage Precaut
6. items can only be activated when the right INPUT selection has been made ie the CHANNEL selection can only be accessed under DTV and ATV input selections e Operate the OSD menu according to the hints provided at the bottom of the screen Recording Operation Maintenance and Service 13 OSD Menu 1 PICTURE menu Picture display settings can be altered as desired The following options are adjustable w Bm HI w A 4 Picture Picture Picture Mode Standard Saturation 50 Brightness 50 Hue 50 Contrast 50 Color Temp Standard Sharpness en Red 50 Saturation q AAA 50 Green q 50 Hue NAAA 50 Blue o ee 50 Color Temp Standard Aspect Ratio Full Red 50 Advanced Settings gt gt Move MENU Return EXIT Exit Move OK Select MENU Return EXIT Exit Description Picture Mode There are four preset settings to choose from Standard Dynamic Personal and Mild Note Custom settings are saved into Personal Mode Brightness Adjust the overall brightness of the picture Contrast Adjust the difference between the brightest and darkest regions of the picture Sharpness Increase this setting to see Sharp edges in the picture decrease it for softer edges Saturation Adjust the saturation of the color based on your own like Hue Controls the tint NTSC mode only OSD Menu Color Temp Choose from Stand Cool Personal and Warm Red Controls the red colour of the picture Green Controls the green co
7. process will find all available channels and store them Basic Operation First Time Setup l First Time Setup Mode Setting Home Use We strongly recommend you select Home val use Store demo is intended only for store Please select the type of use for this TV Please se use If you choose Store demo the picture Home Use optimizes the picture recommended for normal home Home Us settings will be reset every 30 minutes and nal home use and is energy efficient use and is consume more energy Store Demo optimises the picture for store display Store Del Yes No OSD Menu Move gt Adjust MENU Return EXIT Exit BY Move gt Adjust MENU Return EXIT Exit First Time Setup First Time Setup Store Demc OSD Language English Country Australia Auto Scan DTV Mode Setting Start Please select the type of use for this TV Home Use optimizes the picture recommended for normal home use and is energy efficient Store Demo optimises the picture for store display Operation E D O 5 OK Select MENU Return EXIT Exit Move 4 Adjust MENU Return EXIT Exit Auto Scan Scanning CH 7 Recording Operation Digital Channels Found DTV 0 Radio 0 MENU Stop EXIT Ext Maintenance and Service 12 Basic Operation Selecting an input source The unit incorporates multiple input sources which can be selected via the INPUT button on the television panel or remote control The following steps
8. the search Display Feature menu Il Press the Arrow buttons to highlight the Title Chapter Track Number Time Elapsed options Ill Use the Numeric buttons to enter the Title Chapter Track number or Time you would like to view in the title IV Press OK to resume playback To illustrate entering 01 23 56 on the Time Elapsed selection will start the playback from that time frame forwards NOTE a This feature does not work in Program Play mode b If PBC is on it will turn off automatically when Search Playback starts c When playing WMA MP3 JPEG discs Search Feature does not work Changing the Audio Soundtrack Language Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio disc JPEG discs This function varies in its purpose for different disc types Press the AUDIO button to display the current Soundtrack being played Audio Selection for SVCD or VCD There are five audio selections available Stereo L R L L R R L L Auto A D Detect and R R Auto A D Detect With each consecutive press of the button the audio selection cycles through these options For example if you press the button six times the audio selection cycles back to Stereo Audio Selection for CD HD CD WMA Digital Audio Discs There are three selections available Stereo L R L L and R R Audio Selection for DVD and SVCD When playing a DVD or SVCD disc press the AUDIO button to display the current audio language Press the but
9. to see the menu 3 When a DVD disc is loaded use the toggle buttons to highlight the menu item you would like to choose With SVCD or VCD 2 0 press the numeric buttons to select a track to play S ww y da O 3 le A gt a Press OK or Play to start when highlighted Return to Menu when Playing When playing a DVD disc press the Menu button to return to the ROOT menu When playing a SVCD or VCD and Playback control PBC is on press the Menu or Return button to return to the disc menu Maintenance and Service 33 DVD Operation Title Play 1 DVD disc dependant only according to DVD manufacturer specifications During DVD playback press Title button to display the DVD title content and main menu Press the A V buttons to highlight the title you would like to choose and press OK you can also opt to press the numeric buttons 4 The DVD player begins with the chapter 1 of the chosen title Sequence Play 1 Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio disc JPEG discs 2 When a SVCD or VCD disc is loaded and playback control PBC is on press the MENU button once to switch PBC off The player can now playback in sequence mode To turn PBC back on press the MENU button again 3 When the disc is stopped press the Play button to start play back in Sequence mode This is for all compatible discs except VCD and SVCD Additional operations Selecting Tracks Compatible with DV
10. 2 x AAA Battery Quick Start Guide Information Names of each part User Guidance Front View Basic Operation FU DVD Insert a 12cm DVD CD with the label side facing towards the back i OSD Menu C4 gt N D a a n O a gt D o Do o o O 3 S x Q n o D Q AH iil i Se HE o ES g 5 so LED Indicator Remote control window keep clear Recording Operation INPUT Display the input source menu MENU Display exit the OSD menu CH Scan through channels VOL Adjust the volume PLAY Play Pause DVD program EJECT Load eject DVD disc POWER Turn on standby the TV set Maintenance and Service Names of each part SWITCH AC POWER IN 900 u Video R in L in PC IN Basic Operation AC POWER IN Connect to AC power supply SWITCH Turn on off the power supply VIDEO Connect to video output terminal of external devices R L in Connect to the audio output terminal of external devices shared with YPbPr YPbPr Connect to the YPbPr video output sockets of external devices PC IN Connect to the audio output terminal on the PC VGA For PC video input Connect to the VGA RGB plug on the PC COAX Digital output to AV receiver RF Connect an antenna or a 75 Ohm coaxial cable to receive a TV signal HDMI1 2 3 Connect to the HDMI output of external devices like DVD players with a HDMI cable USB Connect USB
11. D HDMI CEC Control System Info DVR Settings Restore Factory Default A A 4 Move MENU Return EXIT Exit lt gt Move OK Select MENU Return EXIT Exit Description Time Settings Clock Use the 4 buttons to select the A E Ed a ey position and the wa buttons to set the time Time Settings NOTE The time cannot be changed manually in Clock gt DTV mode because the clock is synchronised Aen ee pa with the broadcast signals received Sleep Timer Off Ti Auto Sleep Off Imer Free Record Limit 4 hours Power on Timer Turn on off the power on timer Clock Set the power on time Power On Source To select source ATV DTV Power On Channel To select power on channel Power Off Timer Turn on off the power off timer G a Clock Set the power off time A G al OK Select MENU Return EXIT Exit OSD Menu Sc 32 OSD Time Lets you adjust the amount of time Power on Timer G E 9 the On Screen Menu stays on the screen el vesicle 5s Q Power On Source DIAY 2 o before disappearing Power On Chamnel ra Power Off Timer ii Sleep Timer Set the time span before the unit goes ier 00 00 to sleep from the following selections 5min 15min 30min 60min 90min 120min 240min and OFF 2 Move gt Adjust MENU Return EXIT Exit D 6 Ce o 00 o2 Z oO Auto Sleep Turn the automatic standby function on off When activated the unit will switch to standby if it has not received any signal input
12. D SVCD VCD CD HD CD WMA Digital Audio disc JPEG discs 1 When playing a DVD disc press the numeric buttons on the menu or title page to select tracks During DVD playback you can input desired title numbers directly 2 During sequence playback of a SVCD or VCD disk press the numeric buttons to select tracks During Program Playback and when the playback control PBC is on you can only press Prev M4 Next MH button to select As for CD HD CD discs press Numeric buttons directly to select tracks When playing WMA Digital Audio disc JPEG discs press Numeric buttons to select different tracks on current track list Skipping Tracks E ww y a O a O A gt a Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio disc JPEG discs 1 To skip forward to the beginning of the next title chapter track on a disc press Next PMH on the remote or the right side of the player Maintenance and Service 2 To skip backward to the beginning of the preceding title chapter track on a disc press Prev M4on the remote 34 DVD Operation Multispeed Fast Motion Play Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio discs 1 Press the Multispeed Fast Forward button on the remote during play to search through a disc Multispeed Fast Forward has four speeds x2 x4 x8 x16 x32 With each consecutive press of the button the search speed increases If you press the button five times it woul
13. EAC at support teac com au for assistance Contents Safety Precautions POW ECE SUD A A E 1 Instalada a a 2 Usina Manten anciana cia 3 important Safety IASTUCIONS aiii A AAA AA A A A A di 4 5 User Guidance Information Wall Mounting tor Mal ai as 6 A A OO T Accessories Names of each part Front View ccooonnncoccnncccoconncnonnnocnnonocnononononnnonnnnnnnnnnnonnnnnnnnnrnnnnnnnnnnnenanenes 8 Names ofeach pan Back VIEW di 9 Remote CONTO luna 10 11 Basic Operation Basi ONO ae anton adidas A elo aroo iaa 12 13 OSD Menu PICTURE Meda das 14 ZAS UND MS iv 15 SC RANNEL Me suenos 16 18 AOC AP a a eae ata dha eecn a eee hoa 19 SETA reel ee nee A ee ene eee eee 20 21 Multimedia Operation MultiMedia OPE lallO Menane scat clase lis Ga a aN 22 27 Recording Operation o GING DST ANON srs Seiiatenccsseinecqassoscomeaweutagtantens oa saaeseoseni oars cueteueanaio mane ane siaumneisete amass am nwauaa aw aduanhosenemnacacionaameunenainioeca 28 32 DVD Operation DVD OO SY ATE ON asst dci 33 44 Maintenance and Service TNOUDIGSMOOUNG surero a E E aaqeateeesaitasuitaaauaeedeaasesereatoeagueades 45 5 PECIMMCA ION rra A A A AEA 46 47 Power Supply ME DO NOT touch the power DO NOT use a damaged _ DONOT plug several devices Insert the power plug fully into plug with wet hands power cord or plug or a _ into the same outlet _ the outlet loose outlet l _ A congested outlet may cause A loose or improperl
14. LOCK menu This option allows parents to block channels and programs using a password NOTE The default password is 0000 If you have forgotten your current password the master password is 8899 Please take note of this pa Go A eS ae A Lock System Enter Password Enable Channel Locks Parental Guidance New Password Clear Lock gt Move MENU Return EXIT Exit Description Enable Turn on off the Lock Channel function Note You are required to enter a password to access this menu Default password is 0000 Channel Locks When a channel is locked you must enter your password to view the channel Use the wa buttons to select the channel and press the OK gt button on the remote control to lock the channel Press the OK button a second time to unlock the channel Parental Guidance Allows you to select the Program Rating threshold to lock programs by rating New Password You can set a custom password by keying it in twice Clear Lock Select this option to erase all password settings including resetting the password to default 0000 19 OSD Menu go D O E Operation Recording Operation Maintenance and Service OSD Menu 5 Setup menu The option settings allows alterations to the language and regional settings PO Time Settings Subtitle OSD Language English Teletext Audio Languages Blue Screen Subtitle HDMI CEC Control Teletext DVR Settings Blue Screen OA
15. Syd mer estella_20051207_173755 tev Chanral Name YLE TV1 Program Name Syd man aslalla Recorded Time 07 Dec 2005 07 38 Tota Time 00 00 28 Parental Guicanoe None Red button Delete One program Green button Delete All programs Yellow button Replay the program Blue button Zoom In Out between full screen view and preview mode After the recording has been done the stored programs can be viewed through a Recorded List by pressing the LIST button on the remote control To play the items press OK on the remote to select the recorded program To delete the program from the list press the RED button Recording Operation 0 o O T F 20 ED K S S 0 29 Recording Operation Device List Device List Device Avalable Space File Sysiem SN USBI 14880 MB FATS2 Format USB1 Yes NOTE NOT all USB devices such as phones MP3 players cameras and the like are compatible with recording files Please use USB Flash Drives or external HDDs with a separate power supply The USB drive has to be formatted before any recording can be done to ensure that it is in the correct file system format and that there is enough data space for recording WARNING Ensure that no valuable information is currently stored in the hard disk as the formatting process means that ALL DATA will be ERASED from the memory drive connected to the USB HDD port TEAC does not take responsibility for lost data Recording Opera
16. TEAC LEV48A1FHD LED TV USER MANUAL IMPORTANT WARRANTY INFORMATION INSIDE PLEASE READ TEAC WARRANTY PROCEDURE v1 1 Mar 2014 Please read the owner s manual carefully and ensure that you have followed the correct installation and operating procedures 1 Please read this warranty card 2 Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service 3 Ifyou require Warranty Service please contact the TEAC Warranty Service Hotline at 1300 553 315 for assistance Please ensure that you have the model number serial number and purchase receipt ready when you call Please complete the section below and keep this information for your own records Owner s Name Address Postcode Model Name No Serial No Dealer s Name Address Postcode Thank you for selecting a TEAC product If your TEAC product malfunctions please call us directly for warranty support between Monday to Friday at 8 30AM 5PM AEST at the TEAC Warranty Service Hotline 1300 553 315 For other enquiries please contact us at support teac com au www teac com au When calling to receive warranty service please have 1 Your model and serial number 2 Proof of purchase 3 And your product in front of you NOTE You are required to provide a copy of your proof of purchase in order to have your claim processed You can check whether your product is entitled to a 3 year warranty on www teac com au Please rea
17. ace blanket foam cloth etc to prevent any damage to the TV Put the stand to the neck of the TV set as shown below 1 Before you put on the stand please make sure the direction is correct as shown below NH 2 When you are putting on the stand please make sure the neck of the 2 AMAIA IO TV set is in the correct position and attached tightly If you do not attach the stand correctly it will make the TV unstable and may tip over CS A O 20 _ ES a LJ 189 A OA 5 e o e o o o O O COO jj When attaching the stand make sure the screws are attached tightly If the screws do not attach tightly it will lead the TV to be unstable or may even tip over 3 Warnings a It can not be tilted to the front or back as b It can not be tilted to the right or left as shown below Doing so may damage the shown below Doing so may damage the stand stand User Guidance Information Basic Operation OSD Menu Ge HE de ES g 5 sO Recording Operation Maintenance and Service Accessories e The configuration of the components may look different from the following illustration User s Guide User s Guide Remote Control
18. and channels can be recorded viewed and played back on this TV using password access Key in your current password when the password prompt pops up While recording is in progress for a locked channel you will still need to key in the password to watch that channel This does not interrupt the recording process Recording Operation 0 o 0 T F O wh bs ce a 32 DVD Operation Preparation 1 Connect the unit to the power supply and press the POWER button to switch the unit on 2 Press the INPUT button on the remote control to select DVD mode and press OK to select DVD mode 3 Gently insert the disc with the label side away from the television into the disc tray slot The disc will be drawn into the disc tray and loaded automatically 4 Press the EJECT button to eject the disc The disc cannot be drawn into the disc tray by pressing the EJECT button again The disc must be manually pushed into the tray until it is drawn in automatically o o NOTE DVD mode must be selected before inserting the disc The contents of each disc may vary as to how the disc was authored and what features are included Some discs have an autoplay function Some offer different modes such as Menu Play Sequence Play and other modes as illustrated below Menu Play Compatible with DVD SVCD or VCD2 0 2 Ifthe disc is a DVD a ROOT MENU will appear on the screen If it is SVCD or VCD 2 0 please press the Menu button
19. asic Operation OSD Menu ty D O 5 Recording Operation Operation Maintenance and Service Basic Operation OSD Menu E D O Operation Recording Operation Maintenance and Service Fall Prevention ris Wall Mounting Information Stand and wall mounted optional Your LED TV is able to accommodate wall mounting with the use of a wall mount bracket not supplied with LED TV please contact your local hardware store and the mounting hole screw size M6X8mm on the back of the unit We recommend removing the TV stand prior to mounting the TV on the wall Please refer to the figures and procedure below How to remove re install the stand Follow the instructions below to remove the base of the TV 1 Place the unit face down on a soft surface 2 Loosen and remove the 5 screws securing the stand to the TV shown on right 3 Gently remove the stand 4 To reinstall the stand place the unit face down on a soft surface and reverse the above instructions NOTE Make sure the power is completely disconnected and unplugged before starting To prevent the TV from tilting forward and falling over to cause damage or injury please secure the TV to your table or wall using screws or eyebolts and strong cord not provided An example on fixing the TV to a table is shown below 1 Install a wood screw or eyebolt into the table that is supporting the TV 2 Fix a machine screw into a screw h
20. available the purchaser is required to send the product to the nearest TEAC Authorised Service Centre for repair In this event a copy of this warranty card and a copy of your receipt of purchase must be enclosed to be a valid warranty Such equipment or part must be sent freight prepaid to your nearest TEAC Authorised Service Centre After the repair the product will be available for collection by or return to the purchaser at purchaser s cost The warranty does not cover freight or insurance In all cases of transit damage or lost a Claim must be filed against the carrier by the purchaser even if shipment is arranged by TEAC TEAC inhome service may also be available at a fee upon request Accessories Remote including power adaptors AV box TV tuners etc are warranted to be defect free for 1 year Replacement of spare parts under normal usage except cabinet front panel knob removable accessories battery consumable AC cord connecting cord and other accessories are warranted as specified in Warranty Periods Table and will be repaired or replaced at the sole judgement of TEAC The warranties hereby conferred do not extend to and exclude any cost associated with the installation deinstallationor re installation of a product be it in home or otherwise including costs related to the 4d Previous Next 0 9 Goto Page Quick Menu EXIT Back Press lt gt to select options on the toolbar and press OK to change Press 0 9 t
21. be refused subject to the Australian Consumer Law if The product was not transported installed operated or maintained according to manufacturer instruction or The product was abused damaged tampered altered or repaired by any unauthorised persons or Product failure is due to accidents during use installation or transit power surges use of defective or incompatible external devices exposure to abnormal conditions such as excessive temperatures or humidity or entry of liquids objects or creatures into the product cockroach infestations or The customer is unable to provide proof of purchase of the product for verification or The serial number of the product is missing or has been tampered with Where any repairs or services required that are outside of the terms and conditions of this Warranty are requested by the customer or where a fault is determined to be outside of the terms and conditions of the Warranty during an In Home Service call the customer shall be charged for the cost of the repair and or the In Home service call fee No one is authorised to assume any liability on behalf of TEAC or impose any obligation on it in connection with the sale of any equipment other than as stated in this warranty and outlined above TEAC and or its Authorised Service Centres reserve the right to inspect and verify whether the product is exhibiting a major failure as claimed by customers retailers LCD dead pixel policy please contact T
22. d resume normal play 2 During DVD playback normal play resumes when Fast Forward reaches the beginning of the next title chapter During SVCD or VCD play with PBC on when Fast Forward reaches the beginning of the next track it resumes normal play Freeze Frame Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio disc JPEG discs During CD HD CD WMA or Digital Audio disc JPEG playback press Pause 1 once to freeze playback Press Play button to resume normal playback E de y thea O 2 le A a Maintenance and Service 35 DVD Operation Display Features This feature aids the user in viewing options readily available and is compatible with the following disc types DVD SVCD VCD CD HD CD WMA Digital Audio discs This display is available while the files on the disc are being played DVD Display feature When the DISPLAY button is pressed repeatedly while a DVD is being played the response will show as follows Disc Type Title Title being played Total number of titles Chapter Chapter being played Total number of chapter Time Elapsed time of disc playtime Language Language selection Number of optional languages Language Type Audio Type Subtitle Subtitle selection Number of optional languages Angle Angle being played Number of playing angles Disc Type Title Title being played T otal number of titles Chapter Chapter being played Total number of chapter Time Cou
23. d the Terms and Conditions for details of your warranty entitlement 10 11 14 15 16 TEAC Terms AND CONDITIONS oiga Our goods come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure TEAC warrants that this product is free from defects in material and workmanship under normal domestic use with reasonable care and skill Maintenance and cleaning i e laser head is not covered by this warranty The TEAC warranty only applies to 2014 TEAC products purchased NEW from a TEAC Authorised Retailer in Australia This warranty only applies to the original purchaser and cannot be transferred The benefits to the consumer given by this Warranty are in addition to other rights and remedies of the consumer under a law in relation to goods or services to which the warranty relates being the Australian Consumer Law Refund or replacement via your TEAC Authorised Retailer is available for a period of 14 days after purchase for goods that have been inspected and determined to have a major failure Refund and exchange is not applicable for change of mind Subject to the terms herein this warranty effectively covers TEAC product m
24. explain the procedures involved 1 Press the INPUT button to enter the Input menu The screen will display the Input Source menu 2 Use the CH button on the TV set or V direction buttons to select the desired input source 3 Press OK to enter the selected source USB SOURCE Exit NOTE Please make sure the device is connected before selecting the input source Using the On Screen Display Menu The On Screen Display OSD menu acts as the Main Menu and aids the user in browsing through the different options properties available on the television unit Press the MENU button on the remote control to access the OSD menu as shown below S Q T O 2 Main menu E PICTURE m SOUND CHANNEL ee a dl Se Submenu LOCK Eure More Picture menu SETUP Brightness for example I Contrast a O Sharpness Saturation Hue Color Temp Standard Red zzz oS ee ee Ch Move MENU Return EXIT Exit Y D O 5 Operation Hint you should operate the OSD menu according to the hint Use the lt gt direction buttons to make a selection from the main menu PICTURE SOUND CHANNEL LOCK or SETUP Press V button to enter the submenu system Once in the submenu use Y A buttons to select an item Press the OK button to access the selected item to make changes to the settings To return to the main menu press the MENU button To exit the menu display press the EXIT button NOTE e Some menu
25. f the volume of the left or right sound track Surround Sound Turn on off the surround sound function by selecting off on EQ Setting Adjuse the curve of 7 bands equalizer AVL Control the volume of the program automatically Turn on the function by selecting On SPDIF Select from the following options Off PCM and Auto Sound Type Select from Left Right Mixed Stereo 15 OSD Menu Operation fy so O 5 Recording Operation Maintenance and Service OSD Menu 3 CHANNEL Menu This menu selection contains scanning preferences either automatic or manual tuning Channel Auto Scan Manual Scan Channel Edit Signal Information Settings can be altered for individual channels y Ml NOTE Some menus are pa E 39 ro 5 available only in DTV Mode i gt while recording is not in progress Channel Auto Scan Manual Scan Channel Edit Signal Information MENU Return EXIT Exit Description Press the MENU button once to enter CHANNEL setup menu as shown above Press OK to enter the submenu In the CHANNEL setup menu press the va buttons to select the desired item Press the MENU button to return to the previous menu Press the EXIT button to exit OSD Menu If Lock is enabled Auto and Manual Scan are password protected Key in the correct password Default password 0000 o E E Auto Scan o Press OK to enter the auto scan option ra y i es 0 Select the desired Co
26. he Channel Edit menu offers the user to make personal changes to the program listings Various options are subjective to Analog TV and Digital TV programs Press the OK button to enter the Channel Edit menu from the CHANNEL menu as shown below Operation g D O If Lock is enabled Channel Edit is password gt protected Key in the correct password ra f yy ay pa Default password 0000 IS amp Channel Edit 001 YLE TV1 002 YLE TV2 005 YLE FST 008 YLE 24 009 YLE Teema 003 YLEN KLASSINEN 004 YLE FSR Recording Operation RARGCAAA Hi Delete MHMSkip MM Move Move lt gt Page OK Select MENU Return EXIT Exit Maintenance and Service 17 OSD Menu Delete Select the channel to delete and press the RED button A confirmation message will pop up Choose Yes to confirm the deletion or No to cancel Move Select the channel to be moved and press the BLUE button Use the CH buttons to change the channel position Press the BLUE button again to confirm the change Press the MENU button to save and exit Skip Select a channel and press the GREEN button to mark the channel As long as the channel has a skip label it will be skipped when you search through the channels with the CH buttons Signal Information Displays the signal information in DTV mode OSD Menu Operation E D O E Recording Operation Maintenance and Service 18 OSD Menu 4
27. ions Never turn the unit off or disconnect a USB Storage Device Flash Drive when it is being accessed Doing so could damage the TV and the connected USB storage device e Do not use a device that has a maximum current consumption of 100 mA or more e Do not use a device that has security functions or other special functions e Do not use a device that is divided into two or more partitions e A USB hub cannot be used to connect USB devices to this unit USB storage devices that can be played on this unit e Only USB Storage Device Flash Memory maximum 16GB can be used Do NOT use a high capacity USB hard disk with this unit Some flash memory players that charge from USB terminals cannot be used for playback Hard disk drives CD DVD Drives and other devices connected via USB cannot be used e This unit cannot copy or move files e Playable formats FAT16 FAT32 Depending on the condition of the USB flash drive this unit might not be able to play the files on it or skipping might occur NTFS HFS and HFS formats are not supported and cannot be used Max number of playable folders 200 Max number of playable files 999 If the USB storage device contains more than 999 files or 200 folders this unit cannot play it back correctly This unit cannot play files that are larger than 2GB e Files with variable bit rates might not play correctly File information display e The display of this unit can only show single byte le
28. ire or lb a Bk which may result in a fire electric shock Baas o immediately outbreak e a Y O Se HE de ES Always have two or more people 2 Wipe off any moisture dirt or _ Always turn off the unit and _ Do not display still images and partially E at hand to lift or move the unit dust on the power plug pins _ unplug the power cord when Still images on the LED panel for more with a clean dry cloth _ cleaning the unit Use a soft dry than 2 hours as it can cause screen _ e If the unit is dropped it could _ cloth to clean the unit le Ao lesa ll a get damaged or otherwise _ Failure to do so may resultin such image retention reduce ihe cause injury fire or electric shock _ Never clean with irdustrial degree of brightness and contrastar ihe strength polish wax benzene screen when displaying a still image 2 5 _ paint thinner air freshener _ Watching the LED TV in 4 3 format for a 5 _ lubricant detergent or other long period of time may leave traces of 9 such chemicals Also do not borders displayed on the left right and oa clean with a damp cloth centre of the screen caused by the oO difference of light emission on the screen Playing a DVD or a game y console may cause a similar effect to es the screen Damages caused by the DD above effect are not covered by the i Warranty Displaying still images from Video games and PC for longer than a ce
29. ks to stereo output E Speaker Setup Page 7 i j gt 1 a a S e h Q oa le A gt a Maintenance and Service 40 DVD Operation CC TAE TI Dynamic This option is used to set the compression ratio in order to control the sound Volume contrast C Sm S Dolby Digital Setup Dynamic Set DRC To Full Preference Page AT G Subtitle la MENS offrench Way 7 Disc Menu ENG German Parental Spanish Password Default ese Preferred Audio Language Select to downmix multichannel audio soundtracks to stereo output Audio Choose a preferred language track to be played if it is available on the disc If it is not available the default language will be played 41 S e pra G be Q 2 le a gt A Maintenance and Service DVD Operation Subtitle Choose a preferred subtitle language to be used if it is available on the disc If it is not available the default E o Preference Page audio i Y AN language will be used Subtitle gt ENG English gt Disc Menu ENG French Parental German Password Default ortuguese Preferred Subtitle Language Disc Menu Choose a preferred menu language to be used if it is available on the disc If it is not available the default language will be used e 0 Preference Page sd Audio sue ai l AO English Parental French Password Defaul
30. ll be available for collection by or return to the purchaser at a fee upon request TEAC in home service can be made available at a fee upon request A 12 month replacement warranty is applicable to all Accessories such as Remotes Power Adapters and Cables TEAC will ensure to the best of its abilities that all required parts are made available for any required service repair TEAC Australia Pty Ltd and its Authorised Service Centres will use their best endeavours to complete product repairs within a reasonable period based on available resources and workload during the time when service is requested and performed Refurbished parts may be used to repair the product In the case of a replacement the product may be replaced with a refurbished unit of the same type or if one is unavailable a similar refurbished model with equal or better features and specifications Please be advised that if the product presented for repair is capable of retaining user generated data the data may be lost during servicing Customers are strongly encouraged to back up all important information data before sending the product in for service repair Service will be provided only during normal business hours and under safety conditions and circumstances TEAC and its authorised service agents can refuse any repair if safety in relation to OH amp S becomes a concern to its staff or authorised service agents personnel The warranty is void and warranty claims may
31. ller were loaded properly 3 Check to see if any obstacle exists between the LED TV and the remote control then remove it if any 4 If the batteries have no power replace them with two new batteries Compression of video contents may cause distortion especially on fast moving pictures such as sports and action movies Low signal level can cause picture distortion This is not a TV issue Have the antenna assessed Please check if the USB is connected properly Please make sure USB disk is compatible and the multimedia data formats are supported see Specifications page 45 0 o 8 T F co q Y fs o S Ss Q O S y S O ww y 0 9 e m N 3 S a Specifications 1920x1080 Input Connector AUDIO L R PC AUDIO HDMI RF Output Connector HEADPHONE o 3 The HDMI support 1 3 the HDCP support 1 1 100 240V 50 60Hz 120W lt 0 5W PAL BG DK I SECAM BG DK 48 25 863 25 MHz 2x8W 75 ohm NTFS FAT32 Maximum supported hard disk size 400G USB2 0 See the table on next page WUXGA Maximum supported resolution 1920X1080 60Hz 1096x250x683mm 1096x88x641mm 14 35kg 200x200mm M6X8 0 40 C e Specifications are subject to change without notice Weight and dimensions are approximate Specifications Supported Formats MOVIE The max bitrate is 6Mbps The max resolution is 720x576 pixels AVI Mono colour 16 colour 256 colour 16 bit
32. lour of the picture Blue Controls the blue colour of the picture Hy D O 5 Operation Aspect Ratio Choose from Full 4 3 Zoom1 Zoom2 Advanced Settings Adjust advanced video features to fine tune the picture Recording Operation NR Set options to reduce video noise from Off Weak Medium Strong MPEG NR Set options to reduce MPEG noise from Off Weak A Medium Strong Mo Dynamic Contrast Available Dynamic Contrast from Off Weak Medium Strong Backlight Adjust the backlight Move OK Select MENU Return EXIT Exit Maintenance and Service Note Different aspect ratios are available depending on the input source 14 OSD Menu 2 SOUND menu General sound settings can be adjusted according to personal preference with the following options Sound Mode Treble Bass Balance Surround Sound EQ Setting AVL Oi SPDIF PCM Treble Bass Balance Surround Sound EQ Setting AVL Oil SPDIF PCM Sound Type Stereo gt gt Move MENU Return EXIT Exit Move 4 gt Adjust MENU Return EXIT Exit Description Sound Mode There are five preset settings to choose from Standard Music Movie Sports and User Note Treble and Bass can only be adjusted in User mode Treble Adjust the relative intensity of higher pitched sounds Bass Adjust the relative intensity of lower pitched sounds Balance Adjust the balance of the left and right sound track or turn of
33. lt in fire or explosion e Doing so may result in fire electric shock malfunction or deformation Placing the unit on a flat stable surface can prevent accidents from happening Ignoring this precaution may result in the unit toppling over and causing injury e If liquid enters the unit or any metal object falls into the unit it may result in a short circuit fire or electric shock G g Install the antenna away from DO NOT place a burning candle DO NOT place the unit in a poorly DO NOT run power cords near high voltage power lines and burning incense or lighted ventilated enclosure suchas a heat producing appliances such User Guidance Information cigarette on top of the unit cabinet as radiators stoves or irons communication cables Make sure DO NOT place the unit near ias i _it is installed securely any heat source such as a fire Doina so poses a serious risk uw se If the antenna touches a power line 2 place or space heater of Secale and a possible fire the insulation and expose live contact with the antenna may result y _wires resulting in fire or electric n fire electric shock or serious inj i _ outbreak Jy 0 e Doing so poses a serious risk shock e PS of overheating and a possible fire e 0 0 outbreak 7 1 G E EA IA VA e a m1 s a SOS 7 A ll
34. nce and Service 24 Multimedia Operation 2 Music bal USS ecard test GBF S mp3 12 CBF S mp3 0 BFS mp3 HZ mpd thhz Odb mp3 thhz 10d mp3 tkhz 20dB mp3 thhe 60c mp3 MP3 Press 4 to select the option on the table and press OK to change Press WA to search for music and press OK to select Press the EXIT button and select Back to return to the previous menu Quick Menu Press D MENU to enter Quick Menu Repeat Select the repeat mode from Repeat All Repeat 1 Repeat None Background Music Turn on off background music for musical photo text display Sort Sort the file list by File Size or File Name 3 Movie To play video files select a file from the folder If Preview is turned on the video will start playing in a window on the side Press PLAY to start watching the video in full screen g D O E Operation Press 4 gt to select options on the toolbar and press OK to change 44 Previous chapter gt gt Next chapter Il Play Pause program 44 Fast reverse gt gt Fast forward Recording Operation Quick MENU Press D MENU to enter Quick Menu Repeat Select the repeat mode from Repeat All Repeat 1 Repeat None Preview Turn preview on or off Maintenance and Service 25 Multimedia Operation 4 Display Text To play text files most files with the extension txt select a file from the folder and press PLAY Where In Home service Pick up is not
35. ntdown of chapter time Disc Type Title Title being played T otal number of titles Chapter Chapter being played Total number of chapter Time Title elapsed time Disc Type Title Title being played Total number of titles Chapter Chapter being played Total number of chapter Time Countdown of total time SVCD Display feature When the DISPLAY button is pressed repeatedly while a SVCD is being played the response will show as follows e Disc Type Track Track being played total tracks Mute PBC Repeat Mode Elapsed Time e Language Language being played Total Number of languages Language Type Audio Type Subtitle Subtitle being played Total number of subtitles VCD Display Feature When the DISPLAY button is pressed repeatedly while a VCD is being played the response will show as follows e Disc Type Track Playing track Total Number of tracks Mute Repeat Mode Elapsed Time E eS thea O 3 le A gt 2 CD HD CD WMA Digital Audio JPEG Discs Display Feature When the DISPLAY button is pressed repeatedly while a CD HD CD WMA or Digital Audio JPEG disc is being played the response will show as follows e Disc Type Track laying track number Total Number of tracks Mute Repeat Mode Elapsed Time Maintenance and Service 36 DVD Operation Using the Search Feature Compatible with DVD SVCD VCD CD HD CD discs Press the GOTO button on the remote control to bring up
36. o select specific pages Prev Next Turn to previous next file Press the EXIT button and select Back to return to the previous menu Quick Menu Press D MENU to enter Quick Menu Repeat Select the repeat mode from Repeat All Repeat 1 Off Background Music Enable or disable background music Encoding Type Change the type of encoding to suit different languages q y O Operation Recording Operation Maintenance and Service 26 Multimedia Operation Supported Formats MOVIE The max bitrate is 6Mbps The max resolution is 720x576 pixels AVI Mono colour 16 colour 256 colour 16 bit 24 bit 32 bit The max PHOTO resolution is 3000x3000 pixels min resolution is 100x100 pixels MUSIC Sample rate 8K 48K Bitrate 32K 320K Special note 1 the Media Unit can only support USB memory devices such as hard disk drives and flash drives and will not support multimedia devices such as mobile phones and cameras for recording purposes 2 Unit will only support hard disk drives with additional power supply maximum disk partition size of 400GB and a maximum capacity of 1 5TB For optimum performance it is highly recommended that a hard disk drive with an external power supply be used for larger capacities 3 The maximum number of files that each folder can contain is 5000 files 4 When using external USB it is suggested that high quality USB extension cables supported 480mHz be used to ensure smoo
37. odels released in 2014 excluding products purchased for commercial purposes as specified in the Warranty Periods Table below from the date of purchase TEAC models released before 2014 shall be covered under TEAC Warranty v1 5 2 DEC 2011 Commercial use products are covered for 12 months only Authorised Service Centre TENG TOUET SIZE TV NARRANT Y PERON WARRANTY SERVICE TYPE excluding commercial use products from date of purchase 42 and above 212 12 months LED LCD TV 13 to 36 months Authorised Service Centre Service Without built in Blu ray DVD player 32710 407 a With built in Blu ray DVD player 1910 40 Please refer to www teac com au for verification of 2014 models In Home Service Pick up Service This service will only be provided as part of this warranty if all the following conditions are met a The product is indicated in the Warranty Period Table b The product is within the warranty period c The product is located within the normal service area of the local TEAC Authorised Service Centre If TEAC determines that the product is not repairable on site TEAC can complete the repair by taking the product to a TEAC Authorised Service Centre Authorised Service Centre Service The purchaser is required to send the product at their own expense to the nearest TEAC Authorised Service Centre for repair In this event proof of purchase is required to support a warranty claim After the repair the product wi
38. ole near the base in the back of the TV 3 Tie the wood screw or eyebolt to the machine screw with a strong cord Alternatively secure the TV to the wall directly behind it by fixing eyebolts to the wall and tying them to screws fixed on the centre of the TV back panel How to mount the LED TV on the wall 1 After detaching the stand fasten 4 mounting screws thread size M6X8mm NOT SUPPLIED Please contact your local hardware store into the 4 screw holes on the rear cover see the figure below 2 Fasten wall mounting bracket NOT SUPPLIED with LED TV please contact your local hardware store with screws on the wall 3 Carefully check for the strength of the connection before releasing the LED TV NOTE For more detailed instructions please refer to your after market wall mounting instruction book 200mm 200mm lt gt Thread hole size M6 x 8mm depth TV mounting screw size on the TV 6 Fixing the stand 1 TV and stand parts First of all please check that you have all of the parts and that there is no visible damage If a part is missing or appears damaged please contact the TEAC Warranty Service Hotline at 1300 553 31 5 y ty tw D Y A a CE DAOAODAOAOOODADA ON J a La J se s7 z Screws supplied 7 1 Stand 4x 16 ST4 x 16F 2 How to install the Stand Place the TV face down on a soft and flat surf
39. ory ewan S ie rar be Q a le a gt a Maintenance and Service 38 DVD Operation Screen Saver Enable the screen saver the screen saver image will appear when the player stops or the picture is frozen for a few minutes Screen saver will prevent image burn and screen damage e On Start the screen saver e Off Remove the screen saver IS o General Setup Page AE MN _ Screen Saver p Off Last Memory off Screen Sayer Last Memory The Last Memory function can memorize where disc playback was stopped and resume from there when the same disc is inserted again This function can memorize up to 4 discs and is dependent on the disc content Select On enable the function and Off to turn it off e On Start the memory e Off Remove the memory De i Ed General Setup Page ai LAN Screen Last Memory ofr ory r on Off A Set Last Memory State 39 S e h Q oa le a a Maintenance and Service DVD Operation e Speaker Setup In the Audio Setup page press W button to select the Speaker Setup option then press OK or gt button play into the Speaker Setup Page C 0t na Audio Setup Page ad oe PEA O Go To Audio Setup Page Downmix e LT RT Select to downmix multichannel audio soundtracks to LT RT channel output e Stereo Select to downmix multichannel audio soundtrac
40. r 5 3 AAA D SETUP DVD system setup E Aspect Subtitle Audio D Setup A B During playback trigger A B looping playback by pressing once to park point A and again to mark point B Stop looping playback by pressing PLAY PAUSE or STOP AS Golo D Menu Diitle GOTO Play your favourite title chapter track ee D MENU DVD play list Disc menu TEAC D TITLE DVD title 240602000542 Recording Operation Maintenance and Service 11 Basic Operation The following section conveys the unit s general operation such as switching the unit on selecting the input source and using the automated channel search command Switching the unit on The following steps are a guide to switch the unit on 1 Connect the television unit to the antenna wall socket using a coax television cable Connect any other external devices that will provide video input to the television 2 Connect the power cord to the power supply and flip the POWER Switch at the back of the TV to the ON position WARNING Make sure the power output from your power source matches the power input labelled on the television adapter 3 Press the POWER button on the remote control or on the television panel 4 The on screen television display should appear First Time Installation 1 The First Time Installation menu will appear on your screen 2 Select Type OSD Language Country Auto Scan then press the OK button to start the tuning process This
41. rtain period of time may produce partial after images To prevent this effect reduce the brightness and contrast when displaying still images 0 o O T F 0 wf so ce S 0 Important Safety Instructions Warnings and Precautions To prevent any injuries the following safety precautions should be observed in the installation use servicing and maintenance of this equipment Before operating this equipment please read this manual completely and keep it nearby for future reference 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Clean only with a dry cloth 6 Do not block any of the ventilation openings Install in accordance with the manufacturer s instructions Basic Operation 7 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 8 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety When the provided plug does nat fit into your outlet consult an electrician for replacement of the power socket OSD Menu 9 Do not bend the power cord excessively event the cord from being walked on or pinched by weights placed on it Multimedia
42. storage devices hard disk drives Q Headphone Connect to your headphones or other audio equipment OSD Menu E D O E Operation Recording Operation NOTE Before making or changing cable connections please make sure that power to the unit is completely disconnected by switching off the power supply and unplugging the power cable from the wall outlet Maintenance and Service Remote Control eFunctions of remote control buttons The remote control is using Infra Red IR Point it towards the front of the TV The remote control may not work correctly if it is operated out of range or out of angle PEA l l OF INPUT POWER Turn the TV on back to Standby mode al a INPUT Display the input source menu Picture Sound Sleep 3D PICTURE Press repeatedly to cycle through the available video picture modes SOUND Press to cycle through the different sound settings SLEEP Repeatedly press to scroll to preferred off time NUMBER BUTTONS Choose channel directly Press number buttons to view 7E Cu 7A the channel EES E rd CO Return to the previous channel viewed gar 0 R CH FAV Displays Channel List and the Favourite Program List Delete Rec ist Sch ist Sereen DELETE Delete REC program ll aaa REC LIST Record List SCH LIST Display Scheduled Recordings list Er WN EXIT SCREEN 1 While playing music press this button to turn off the LED TV screen Basic Operation
43. t _ Preferred Menu Language S e h Q oa le A gt a Maintenance and Service 42 DVD Operation Parental When playing discs with parental lock function you may select an Age Control Grade according to disc rating and your own preference For example if PG is selected DVD Video disc rated higher than PG cannot be played e KID SAF e G e PG e PG13 e PGR e R e NC 17 e ADULT Preference Page Peet N EAU Subtitle Disc Menu 3 PG Parental Password Default _ Set Parental Control Password User can change the password that is required when the user wants to change the Age Control Grade in the Parental Lock function NOTE Default password is 123456 pa Preference x BAU Subtitle Disc Menu Parental Password Default S E ge G pun 9 Q O Change Password a Maintenance and Service 43 DVD Operation Old Password_ Confirm Default Reset the DVD settings to the original factory settings by choosing RESET and pressing the OK button TE gt lt a Preference Page ae A A A A Disc Menu Parental Pas sword Load Factory Setting S e h Q 2 le a gt a Maintenance and Service 44 Troubleshooting Do not use other functions that are not mentioned in this user manual lf a problem occurs with your LED TV please take the following steps first f you still have the problem turn the po
44. th playing of video files 5 The television unit can only support audio formats of single and binary channels fe D O Operation Recording Operation Maintenance and Service 21 Recording Operation Digital Video Recording DVR settings In DTV Mode only The DVR function allows this unit to record live digital TV DTV programs allowing for viewing on demand at any time This function supports DTV program recording Time shift and playback as described below DVR will only record when there is an external USB drive connected to the unit with sufficient memory space available Recording can be done both manually on demand and also using Scheduled Recording NOTE e When DVR function is in progress DO NOT unplug the power or the external USB device at will e When DVR function is active the power indicator will blink with red and green colours consecutively e Before the start of a program recording please make sure the external USB device is connected e Pre recording if the available storage space is low a warning message would appear before recording e While recording If available storage space becomes low the recording will be automati cally stopped DVR Settings 4 Move Left p gt Move Right OK Select EXIT Exit Recording Operation 0 y O T F Ln ED cc Ss 0 28 Recording Operation Recorded list YLE TV1_Syd4mer asialia_20051207_173656 tsv YLE TV1_
45. tion 0 o 0 T F 7 q UY ED cc a 30 Recording Operation Schedule List Schadula Lisi Bate A Ens Tire Red button Delete One scheduled program Green button Delete All scheduled programs Scheduled Recording is a function which allows the user to record future programs without physically being present to initiate the recording A schedule setup is made to mark recording dates and times of the broadcasted programs stated on the Electronic Program Guide EPG Recording would terminate at the end of the program Scheduled recording can start while the TV is on the channel will switch automatically or on Standby Mode Please make sure that the connected USB device has enough data storage for recording If data space runs out the recording will stop automatically CAUTION DO NOT remove the USB drive while recording is in progress This may damage the drive Time Shift Time shift is an ideal way to temporarily pause live TV in case of a distraction such as a doorbell or a ringing telephone Once the distraction has passed playback can be resumed from the point where the TV program was paused Press the PLAY PAUSE button on the remote control to start the Time shift mode Press the PAUSE button again to resume playback NOTE e Display the Time shift infobar by pressing EXIT button on the remote control press again to close e Press the PLAY button to play the Time shifted program e Press the STOP bu
46. to enter the folder file navigation screen 1 Photo To display photos select files from the folder and press PLAY to view in full screen The image should appear on screen as illustrated below To play background music during a photo display first enter the music playing menu and start music playback Ensure that Background Music is set to ON via the Quick Menu Next return to the Photo file navigation Start the photo display while the music continues to play 154910i4mrbvis9oetioor_jpg_thumb_jpg mo OK Slide Show Single View lt P Previous Next Rotate DARES Quick Menu Press 4 gt to select options on the toolbar and press OK to change OK Start playback pause photo viewing Previous Next Display the previous next photo Rotate Rotate the photo clockwise counter clockwise EXIT Press the EXIT button and select Back to return to the previous menu Quick Menu Press D MENU to enter Quick Menu Interval Time Adjust slideshow frames interval time Repeat Select repeat modes from Repeat All Repeat 1 Repeat None Sideshow Effect Select the Sideshow Effect from Fade In Fade Out Background Music Play pause music You can only play or pause the music you have selected D O Operation 2 Music To play audio files select a file from the folder and press PLAY to start the music Information about the music file is displayed on the screen Recording Operation Maintena
47. ton again to browse and select the next supported audio language NOTE Certain DVDs have limited language selections or none at all Subjective to manufacturer specifications 3 c E y fess O 2 le A gt a Maintenance and Service DVD Operation Basic Operation Press the Power button on the TV or the remote control then press the INPUT button to select DVD mode If there is no disc in the DVD player the screen will show NO DISC Insert a disc with the label facing the correct direction according to the picture next to the disc slot Do not touch the disc s reflective surface Hold the disc at the edges with your fingers and gently place the disc into the slot The player will automatically draw the disc into the player To eject the disc press the EJECT button on the TV or the EJECT 4 button on the remote control DVD Setup Mode e Setup Mode provides the menu for the configuration of General Setup Page Audio Setup Page Dolby Digital Setup Preference Page e Item selection in the Setup Menu is done by using the Navigation Arrows SETUP button and the OK button e Press the SETUP button first enter into SETUP menu then press the DIRECTION RIGHT button you can enter into the next Sub menu e Press the SETUP button again to exit the Setup Menu OSD Language This is used to select the OSD language lt S 5 General Setup F nage ae osD Lang Screen Sawer Bond miir eiiie T Last Mem
48. tters and numbers e If the file information contains Japanese Chinese or other double byte characters playback is possible but the name will not be shown correctly A y O 3 Operation Recording Operation Maintenance and Service 22 Multimedia Operation Basic Operation Press the INPUT button on the remote control to display the input source menu and select USB with the wa buttons Press the OK button to enter the Multimedia menu as shown below S101010 T J V gt 3 lt lt YPBPR DAB HDMI HDMI2 HDMI3 USB SOURCE Exit 2 Press 44D to select the type of media you want to play from the connected USB device as follows PHOTO MUSIC MOVIE and TEXT Press wa to select the device and press OK button to enter 144 Return to device list Hints for operation Press wadp to browse through the files Press the OK button to select the file or access the folder then press the button to play the selected media in full screen In full screen mode you can access playback controls at the bottom of the screen by pressing the OK button and press EXIT to hide it Press M to stop and exit the full screen program By D O E 5 Operation Recording Operation Maintenance and Service 23 Multimedia Operation To access photo audio video or text files from an external drive first choose USB Input then select the type of media to be played
49. tton to exit Time shift and return to live TV broadcast Available Time 07 18 57 07 19 28 31 Recording Operation 0 y 0 T F Q q UY ED cc a Recording Operation Electronic Program Guide EPG Press the EPG button to display the OSD menu as below 07 Dec 2005 17 35 10 PROGRAM GUIDE 07 Dec 2005 14 30 07 Dec 2005 18 00 Details information gt of selected program 002 YLE TV2 18 00 Program list for the 19 40 Itsen isyysp iv n paraati Lahdessa current channel 20 15 Tanaan otsikoissa gt P di ti 21 10 Tohtori Ben Casey ress direc On 22 00 Rakkauksia buttons to navigate Reminder PrevDate NextDate the lists Rec Record OK Display EXIT Exit Once the program of choice has been highlighted press the REC button on the remote control This will bring you to Record Mode where you can set the start and end time of the recording Schedule List Group 3 Sefing Status iz 3 rot Recorded Mode Setting the Recorded Mode The TV will record the program automatically according to the ga Mode Once set time e A o MODE Select the record mode o H SiatTime lt Q 2051207 gt Channel Display the name of the recording program te Bi Start Time Set the start time GRE select gt End Time Set the end time MEE Rotum CENT eu Press OK button to save the setting and exit the menu NOTE If channel locks or parental control locks are enabled the locked programmes
50. untry and Tune Type y m using the lt gt buttons then press OK to gt start scanning Auto Scan Country Australia NOTE Mode DTV Start If ATV DTV option is selected the first 50 of the scan will be for ATV tuning while the second half would be for DTV tuning If desired the user has the option to exit the tuning process midway by pressing the button tez EJE 3 dE 0 2 NO OK Select MENU Return EXIT Exit Maintenance and Service 16 OSD Menu Digital Manual Scan Press the OK button to enter the Digital Manual ra E ay Scan menu Digital Manual Scan Select a DTV channel and press OK to start Digital Scan CH36 searching Start Frequency 585 50 MHz Frequency Press 4 buttons to select Frequency Strength 78 Auto or enter digital numbers Strength Displays the signal strength Move lt p Adjust 0 9 Input MENU Return EXIT Exit Analog Manual Scan Press the OK button to enter the Analog Manual AS Scan menu Analog Scan Press 4 buttons to select frequency IMANES e Channel to Save Select a channel number Channel to Save Color Sound System Select a TV system for sound Seton searching AFC AFC Turn on off the auto frequency control function sel Star Press 4 gt buttons to manual search Move lt gt Adjust 0 9 Input MENU Return EXIT Exit v NOTE Press the RED button to save any changes to the settings OSD Menu Channel Edit T
51. wer off and contact your dealer or an authorized service center Problem The picture does not appear The picture appears too slowly after the power is turned on Screen is too bright or too dark Screen is too large or too small Stripes appear on the screen and it shakes The screen does not move Screen appears but there is no sound Remote control does not work Picture is distorted USB not playing Action Is the power plugged in Insert the power plug Press the power button on the remote control Like your computer the TV has to run a number of diagnostic and software checks before it can display any broadcast channels The picture should appear in approximately 15 seconds Perform brightness adjustment or contrast adjustment Adjust the aspect settings Keep any appliances that emit magnetic radiation away from the TV Press the PAUSE button Check if the Pause button is pressed on external equipment 1 Check if the MUTE function has been activated 2 Increase the sound level by pressing volume adjustment button 3 Check if sound terminal of external input is connected properly 4 Check if audio cables are connected properly 5 Select and check the other input If the sound still does not work and the other channels are the same after you have done as the above contact your dealer or an autorized service center 1 Check if main power is On 2 Check that the batteries of the remote contro
52. y Do not attempt to thunderstorm paper clip or a bent wire into _ service the unit yourself _ the ventilation openings or A V The unit could topple over 0 e Not doing so may result in fire terminals onto a child and result in or electric shock serious injury _ Doing so may result in fire or _ Doing so poses a serious risk _ _ electric shock If the unit _ of fire or electric shock e _ requires repair contact the _ service center g g P 55 a ow a E b o E Sn a A A lt Es NWarnings x f i E in When not using the unit for When moving the unit be sure If you notice any unusual odors lt When removing the batteries A long periods of time discon to turn off the unit and unplug or smoke around the unit tom the remotercontrol make O nect the power cord from the the power cord from the wall _ immediately disconnect the unit sure children do mot i n o wall outlet outlet _ from the outlet and contact the _ them Keep the batteries out of e service center l i eo be od the reach of infants and e If not cleaned clogged dust _ Moving the unit with the _ Failure to do so may resultin children particles at ventilation holes power cord connected to the fire or electric shock could cause the unit to heat up outlet may cause damage to e Ea l and ignite when switched on the cord resulting in f
53. y e Doing so may result in Doing so may result in _ the outlet to overheat and start _inserted power plug electric shock fire or electric shock a fire may result in fire User Guidance Information DO NOT bend the power cord gt excessively or place heavy objects on it e Doing so may result in fire or electric shock Basic Operation 5 c O A Y le When disconnecting the Always unplug the unit before S 6 power cord from an AC _ Cleaning E y ous always grasp it by cone The purpose of these precautions is to o elena fire or electric shock ensure user safety and prevent property 0 e Pulling on the cord damage d the internal wire a ed Be sure to read and observe all safety and may result in a fire precautions It is the responsibility of the user to make sure all precautions and warnings are heeded and followed Recording Operation Maintenance and Service Installation A a DO NOT use or store flammable DO NOT place the unit on an unstable or combustible materials near surface such as a sloped table or any the unit stand with a contact area smaller than 2 the bottom surface of the unit stand DO NOT place containers with DO NOT place the unit where liquids such as vases drink cans _ it is exposed to rain excessive bottles or small metallic objects moisture or grease on top of the unit _ Doing so may resu

USER MANUAL

Contents

Download Pdf Manuals

Related Search

Related Contents