Qnn Safe Australia Pty Ltd Product User Manual
Contents
1. Serial Number QNN SAFE AUSTRALIA PTY LTD ABN 47 168 078 233 Unit 9 376 Newbridge Road Moorebank NSW 2170 Web site www qnnsafe com au Email info qnnsafe com au Phone 02 87982669 QNN Safe USER S MANUAL FOR GTX SERIES SAFE This package contents User manual 2 Master keys 1 External Battery Box 2 Bolt Down Screws M12mm x 80mm 4 AA Batteries 2 Emergency back up Keys Please contact your retailer or Qnn Safe Australia P L if any shortage occurred For the first time use it needs the external battery power support Insert the supplied 4 AA batteries into the External Battery Box Connect the power to the front panel The power inlet is located at the center of the bottom side After the safe is opened please replace the batteries into the internal battery box which is located behind the door plate please slid the box cover upward or downward to open Prepare the master key into the position After enter the right code turn Master Key clockwise and turn the knob clockwise Safe is now unlocked For some model just turn the master key to unlock the safe This safe is operated by the Master Key and the digital code The factory setting for the digital code is 12345 6 Page 1 of 3 QNN SAFE AUSTRALIA PTY LTD ABN 47 168 078 233 Unit 9 376 Newbridge Road Moorebank NSW 2170 Web site www qnnsafe com au Email info qnnsafe com au Phone 02 87982669 Opening instructions Prep2. are the Master Key into the position Press and then the code and then press The OPEN displayed with one beep The door is now ready for open factory setting code 123456 Turn Master Key clockwise and turn the knob clockwise safe now is unlocked For some model just turn the master key to open the door Displayed E CODE with 3 beeps means it is a wrong code try 3 continual wrong code tries will lead the loudly sound alarm activated for 60 seconds To deactivate the alarm please follow the above instructions to enter the right code Any unexpected sharking and moving toward the safe body will lead the loudly sound alarm be activated for 60 seconds Closing instructions Close the door Turn the knob counterclockwise For some larger models Turn Master Key counterclockwise and remove the key Changing Code Please keep the door at open position during the whole processing until fully ensure that the code is changed correctly For security reasons please change to your own code after the first opening Your code can be set up to 10 digits Open the safe door Press the reset button which is located behind the door plate near the upper hinge USER then displayed at LED window Input your new own digital code within 10 digits then press AGAIN then displayed at LED window To confirm Input your new own digital code again then press DONE then displayed at LED window w
3. isplayed Then Press 4 and then Press The DONE displayed means function is de activated Repeat the same operation will activate the function again To turn the night on manually open the door then press press Light will go off 3 seconds after the safe is locked or automatically turn off after 60 seconds Cautions For security reason Please do not story the Master Key with Emergency Key together Do not store the Emergency Keys and the External Battery Box inside the safe When the LED window displays LO BAY it means that the batteries need to be replaced Please replace new batteries as soon as possible Page 3 of 3
4. ith two beeps which indicate that the code is changed successful Keep the door open check and remember the code Page 2 of 3 QNN SAFE AUSTRALIA PTY LTD ABN 47 168 078 233 Unit 9 376 Newbridge Road Moorebank NSW 2170 Web site www qnnsafe com au Email info qnnsafe com au Phone 02 87982669 Emergency Backup In an emergency saturation safe can be opened by the Master Key with the override Emergency key together Override the digital lock The key hole is located at the centre of the front panel A small plastic cover need to be removed by screwing counterclockwise to expose the key hole Turn the master key clockwise while hold the Emergency Key counter clockwise For some then turn the Handle Knob to open the door Other features Set Day and Time Press and then the code and then press The SET displayed Then Press 2 and then Press follow the flash cursor to set the Year Month Day Week Hour Minis Press to complete Code hidden function Press and then the code and then press The SET displayed Then Press 3 and then Press The DONE displayed means function is activated Repeat the same operation will de activate the function Illumination light atomically on for 60 seconds after the door is opened or light will goes off 3 seconds after door is locked To saving power the auto function can be de activated Press and then the code and then press The SET d
Download Pdf Manuals
Related Search