ES424X6+BHP Detailed User`s Manual
Contents
1. info sansdigital com phone 800 980 1988 fax 626 322 3878 IGITAL Hard Drive Locations Power LED Fan Power Fail LED Alarm Reset HODIS HOD 14 HODIS HOD14 Tray handle Lock hole Connection Diagram HOST SERVER ES424X B Redundant Power Supply The redundant power supply feature consists of hot swappable power supply modules If one of the power modules fails the remaining working power supply modules will continue to provide power to the unit so users do not experience downtime A replacement power supply could be installed while the unit is running Once the replacement power supply has been installed the unit will regain its redundant power feature Note Power must be supplied to all power supply modules in order for the redundant feature to operate correctly Fan Power Fail LED Information Front Panel When the power supply modules or internal cooling fan malfunctions the front fail LED will blink and the alarm will go off Please see table below Description Alarm Buzzer Fail LED Power supply failure Blinking red Cooling fan failure Beep with one second interval Blinking red Note Pressing down the Alarm Reset button temporarily silences the alarm Alarm will start buzzing again once the unit has been restarted ANS www sansdigital com info sansdigital com phone 800 980 1988 fax 626 322 3878 IGITAL2. ES424X6 BHP Quick Installation Guide Hard Drive Installation Press the key included in the package into the lock slot located at the front of the hard drive tray until the tray handle unlocks 2 Pull on the tray handle to remove the tray from the enclosure 3 Dismount the plastic tray protector rods by removing the screws on the sides of the tray 4 Place the hard drive in the tray and fasten it with the screws included in the package in corresponding locations 5 Place the tray back into the enclosure and lock the tray by pushing in the tray handle Bundled Controller Card Installation Turn off the computer and unplug the power cord from the back of the unit 2 Open the cover of the computer and locate a PCIE x8 slot for the RAID controller card 3 Securely install the RAID HBA card into the PCIEx8 slot and tighten the screws 4 Close the cover of the computer and attached the included SFF 8088 SAS cable between the ES424X6 unit Input Port to the first SAS Port on the RAID HBA 5 Turn on the power on the host computer and insert the RAID HBA CD driver 6 Install the driver and WebGUI utility from the CD based on the operating system used Product Diagrams Unit Backplane BEE EERE EEE BSEREEEES f l Power Power Supplies RJ11 Seral Pot SAS Exp Out SAS Exp in Link Activity LED Switch 1 2 3 for Firmware Update Connector Connector for Expander Port ANS www sansdigital com
Download Pdf Manuals
Related Search