Home

LBT-GPX555 / MHC-GPX888/GPX555

1. 18 Remote control sensor 19 SLEEP page 33 Set the Sleep Timer 20 REPEAT FM MODE Listen to a disc a USB device a single track or file repeatedly page 19 Select the FM reception mode monaural or stereo page 22 21 DISPLAY Change the information on the display panel 22 SEARCH MEMORY Enter or exit search mode Preset the radio station page 23 23 CLEAR Delete the last step from the program list 24 TIMER MENU page 15 34 Set the clock and the timers 25 PLAY MODE Select the play mode of an AUDIO CD MP3 disc or a USB device page 18 The VOLUME and B buttons have a tactile dot Use the tactile dot as a reference when operating the system Getting Started Hooking up the system securely ANTENNA m mn OUT EJ and are different depending on the model See below MHC GPX888 LED SPEAKER MHC GPX888 m FRONT SPEAKERS dS ere on Era ROL IMPEDANCE USE 4n LBT GPX555 MHC GPX555 LED SPEAKER To front speaker left To front speaker right 9 To subwoofer left To subwoofer right 5 To subwoofer peuejs Bune 1198 1288 Antennas Find a location and an orientati
2. N Y 4 485 746 11 3 HOME AUDIO Getting Started M SYSTEM Disc USB Playback 77 USB Transfer Operating Instructions Tuner Bluetooth Sound Adjustment Other Operations Additional Information LBT GPX555 MHC GPX888 GPX555 268 To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture reduce the risk of fire do not cover the ventilation opening of the appliance with newspapers tablecloths curtains etc Do not expose the appliance to naked flame sources for example lighted candles To reduce the risk of fire or electric shock do not expose this appliance to dripping or splashing and do not place objects filled with liquids such as vases on the appliance As the main plug is used to disconnect the unit from the mains connect the unit to an easily accessible AC outlet Should you notice an abnormality in the unit disconnect the main plug from the AC outlet immediately Do not install the appliance in a confined space such as a bookcase or built in cabinet Do not expose batteries or appliances with battery installed to excessive heat such as sunshine and fire The unit is not disconnected from the mains as long as it is connected to the AC outlet even if the unit itself has been turned off This equipment has been tested and found to comply with the limits set out in the EMC Directive using a connection cable shorter than 3 meters CAUTION
3. 0 3 m 1 foot peuejs Bune 45 13 Horizontal positioning SONY SONY emblem emblem deeds 0 3 m 1 foot 2 4 0 3m 1 foot m LBT GPX555 MHC GPX555 only VU 0 3 m 1 foot 4 4 0 3 m 1 foot 45 Line Array Speaker System MHC GPX888 only To create a party environment we recommend you to install your speakers using Line Array Speaker System It provides a wide sound space for a large room like a hall Positioning SONY SONY emblem emblem o o Qi 3 C gt AR 0 3 m 1 foot 50 3 m 1 foot 1465 Installing 1 Insert the pins of the spacer supplied to the catcher holes on top of the subwoofer Pin d Spacer Catcher hole Subwoofer 2 Stack the front right speaker on top of the subwoofer Make sure the pins of the spacer are inserted into catcher holes on the front right speaker Front right _ speaker Catcher hole Spacer Subwoofer 4 3 Repeat steps 1 and 2 to install another subwoofer and front left speaker Turning the SONY emblem MHC GPX888 only Horizontal positioning After positioning the speakers turn the SONY emblem on the front speakers and sub
4. Speaker system Front speaker SS GPX888 2 Subwoofer SS WGP888 2 The LBT GPX555 MHC GPX555 consists of Unit Speaker system Front speaker SS GPX555 2 Subwoofer SS WGP555 1 HCD GPX555 1 5GB 658 Table of Contents About this manual 5 Guide to parts and controls 8 Getting Started Hooking up the system securely nente ttn 11 Positioning the speakers 13 Setting the clock 15 Changing the display mode 15 Disc USB Playback Playing a disc 16 Before using a USB device with this 16 Playing a USB device 17 Searching for a track or audio file Track Search 17 Using play 18 USB Transfer Transferring music 19 Tuner Listening to the radio 22 Bluetooth About the Bluetooth wireless technology esses 23 Setting the Bluetooth audio COG6eCS sui retten nnns 24 Connecting a smartphone with one touch NFC 24 Listening to music wirelessly on a Bluetooth device 25 Setting the Bluetooth standby MOE 27 Setting the Bluetooth signal 27 Using SongPal via Bluetooth nrnna aa 28 Sound Adjustment Adjusting the sound
5. The use of optical instruments with this product will increase eye hazard CLASS 1 LASER PRODUCT LASER KLASSE 1 LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT This appliance is classified as a CLASS 1 LASER product This marking is located on the rear exterior When unpacking or handling a big and or heavy speaker be sure to handle the unit with two or more persons Dropping the unit may cause personal injury and or property damage FOR UNITED STATES CUSTOMERS NOT APPLICABLE IN CANADA INCLUDING IN THE PROVINCE OF QUEBEC POUR LES CONSOMMATEURS AUX TATS UNITS NON APPLICABLE AU CANADA Y COMPRIS LA PROVIBCE DE QU BEC For the customers in the USA Owner s Record The model and serial numbers are located on the rear of the unit Record these numbers in the space provided below Refer to them whenever you call upon your Sony dealer regarding this product Model No Serial No This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons This symbol is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance Important Safety Instructions 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instruc
6. SPP Serial Port Profile Supported Bluetooth codecs SBC Sub Band Codec AAC Advanced Audio Coding ujoojen g Haun About the BLUETOOTH indicator The BLUETOOTH indicator lights up or flashes in blue to show the Bluetooth status System status Indicator status Bluetooth standby Flashes slowly Bluetooth pairing Flashes quickly Bluetooth connection Lights up is established 2368 Setting the Bluetooth audio codecs You can receive data in AAC codec format from a Bluetooth device 1 Press BLUETOOTH on the unit to select Bluetooth function BLUETOOTH appears in the display panel 2 Press OPTIONS on the unit 3 Press repeatedly to select then press 2 4 Press repeatedly to select BT ON or BT OFF BT AAC ON Enable reception in codec format BT AAC OFF Receive in SBC codec format To exit the options menu press OPTIONS on the unit Notes Youcan enjoy high quality sound if the AAC is selected In case you cannot listen to AAC sound from your device select BT AAC OFF If you change this setting while the system is connected to a Bluetooth device the Bluetooth device will be disconnected To connect to the B uetooth device perform the Bluetooth connection again If the sound is interrupted in AAC codec format select AAC OFF to cancel the setting In this case the system receives SBC co
7. To exit the options menu press OPTIONS on the unit Folder and file generation rules When transferring to a USB device a MUSIC folder is created directly below ROOT Folders and files are generated within this MUSIC folder according to the transfer method and source as follows Synchronized Transfer Source Folder File name Audio files Same as the source AUDIO CD CDDAO0001 TRACKOOI JejsueJ GSN 2168 2268 REC1 Transfer Source Folder name File name Audio files RECI MP3 Same as the source AUDIO CD REC1 CD TRACK001 Analog Transfer Source Folder name File name FM TUFM0001 TRACK001 AM TUAM0001 AUDIO IN 1 EXAU0001 AUDIO IN 2 Folder and file numbers are assigned serially thereafter Notes on transfer While transferring except analog transfer no sound is output CD TEXT information is not transferred to the created MP3 files The transfer stops automatically if the USB device runs out of space during transfer the number of audio files or folders on the USB device reaches the limit that the system can recognize page 17 Ifa folder or file that you are trying to transfer already exists on the USB device with the same name a sequential number is added after the name without overwriting the original folder or file Youcannot
8. car parked in direct sunlight On safety Completely disconnect the power cord mains lead from the wall outlet mains if it is not going to be used for an extended period of time When unplugging the unit always grip the plug Never pull the cord itself Should any solid object or liquid get into the system unplug the system and have it checked by qualified personnel before operating it again USA model only One blade of the plug is wider than other for the purpose of safety and will fit to the wall outlet only one way If you are unable to insert the plug fully into the outlet contact your dealer AC power cord must be changed only at the qualified service shop On placement Do not place the system in an inclined position or in locations that are extremely hot cold dusty dirty or humid or lacking adequate ventilation or subject to vibration direct sunlight or a bright light Becareful when placing the unit or speakers on surfaces that have been specially treated for example wax oil polish as staining or discoloration of the surface may result Ifthe system is brought directly from a cold to a warm location or is placed in a very damp room moisture may condense on the lens inside the unit and cause the system to malfunction In this situation remove the disc and leave the system turned on for about an hour until the moisture evaporates On heat buildup Heat buildup on the unit during ope
9. 28 Selecting the Virtual Football TOG E 29 Creating your own sound 29 Creating a party atmosphere DJ EFFECT e 30 Other Operations Using the Party Chain function oo eects eteeeeeeeees 30 Singing along 32 Changing the spectrum pattern of the display panel 33 Viewing information in the display panel 33 Changing the illumination pattern and color 33 Using the timers 33 Using optional equipment 34 Deactivating the buttons on the unit Child Lock 35 Setting the automatic standby T nctiom i enin 35 Additional Information Playable discs 36 Websites for compatible CEVICES omi ERES 36 Troubleshooting 37 iore eic 42 Precautions sess 43 44 768 Guide to parts and controls This manual mainly explains operations using the remote control but the same operations can also be performed using the buttons on the unit having the same or similar names Unit 4 aaj 12 When pressing the buttons on the unit press on the printings of the buttons MHC GPX888 only
10. 9 kHz or 10 kHz for some areas You cannot change the AM tuning interval in Power Saving Mode Use the buttons on the unit to perform this operation 1 Press TUNER BAND repeatedly to select AM band 2 Press I to turn off the system 3 While holding down TUNER BAND press I O AM 9K STEP or AM 10K STEP appears in the display panel When you change the interval all the AM preset stations are erased Presetting radio stations You can store up to 20 FM and 10 AM stations as your favorite stations 1 Tune to the station you want 2 Press MEMORY Preset number ch A MEMORG aie o Y 4 3 Press TUNING repeatedly to select the preset number you want then press COMPLETE appears in the display panel The station is stored To tune to a preset station Press PRESET or 3 on the unit repeatedly to select the preset number you want Bluetooth About the Bluetooth wireless technology Bluetooth wireless technology is a short range wireless technology that enables wireless data communication between digital devices Bluetooth wireless technology operates within a range of about 10 meters 33 feet Supported Bluetooth version profiles and codecs Supported Bluetooth version Bluetooth Standard version 3 1 Supported Bluetooth profiles A2DP Advanced Audio Distribution Profile AVRCP 1 3 Audio Video Remote Control Profile
11. AUDIO CD FLDR performs the same operation as blank play mode When playing a USB device ALL USB play all USB devices USB play a USB device FLDR play all audio files in the specified folder on the USB device Playing in random order Shuffle Play Press PLAY MODE repeatedly when playback is stopped When playing a disc SHUF shuffle all audio files on a disc FLDR SHUF shuffle all audio files in the specified folder on the disc When playing an AUDIO CD FLDR SHUF performs the same operation as SHUP play mode When playing a USB device ALL USB SHUF shuffle all audio files on all USB devices USB SHUF shuffle all audio files on a USB device FLDR SHUF shuffle all audio files in the specified folder on the USB device Note When you turn off the system the selected Shuffle Play is cleared and the play mode returns to Normal Play Creating your own program Program Play You can make a program of up to 25 steps in the order you want them to be played back 1 For CD function Press CD to select CD function For USB function Press USB repeatedly to select the USB device you want 2 When playback is stopped press PLAY MODE repeatedly until PGM lights up in the display panel 3 Audio files only Press repeatedly to select a folder If you want to program all files in the folder press Press I 4 gt gt i repeatedly to select the
12. Analog Transfer You can transfer sound from an analog audio source other than CD USB or Bluetooth function to a USB device Use the buttons on the unit to perform this operation 1 Connect a transferable USB device to the B port page 20 2 Press TUNER BAND or AUDIO IN repeatedly to select the source you want to transfer 3 Press REC TO USB B PUSH ENTER appears in the display panel 4 Press ENTER The transfer starts when DON T REMOVE appears in the display panel 5 Start playing the source To stop transfer Press Bl To create a new MP3 file Press REC TO USB B during Analog Transfer NEW TRACK appears in the display panel A new MP3 is also created automatically after approximately 1 hour of transfer Notes When a new MP3 file is created transfer is disabled for the time being If you press REC TO USB B again after a few seconds a new MP3 file can be created Erasing audio files or folders from a USB device Use the buttons on the unit to perform this operation 1 Press USB USB SELECT repeatedly until USB A or USB B lights up in the display panel when playback is stopped 2 Press 4 P or C3 repeatedly to select the audio file or folder 3 Press OPTIONS 4 Press to select USB ERASE then press ENTER FOLDER ERASE or TRACK ERASE appears in the display panel 5 press ENTER COMPLETE appears in the display panel
13. Bluetooth device in all functions when Bluetooth signal is set to on The Bluetooth signal is turned on by default Use the buttons on the unit to perform this operation Hold down MOVIE GAME and LED COLOR for about 3 seconds ON or BT OFF appears in the display panel 2168 2848 Notes You cannot perform the following operations when Bluetooth signal is set to off Pairing with Bluetooth device Erasing the pairing information Using SongPal via Bluetooth When the Bluetooth signal is set to off this system cannot be detected and connection cannot be established from Bluetooth device If you touch the system with an NFC compatible smartphone or set the Bluetooth standby mode to on the Bluetooth signals will set to on automatically Using SongPal via Bluetooth About App A dedicated app for this model is available on both Google Play and App Store Search for SongPal and download the free app to find out more about the convenient features Bluetooth technology works with iPhone 5s iPhone 5c iPhone 5 iPhone 4s iPhone 4 iPhone 3GS iPod touch 5th generation iPod touch 4th generation Sound Adjustment Adjusting the sound To Do this Reinforce the Press BASS BAZUCA on bass and create the unit a more powerful sound Reduce the bass Hold down BASS sound BASS BAZUCA on the unit for CUT 2 seconds or more To cancel the BASS CUT effect press BASS BA
14. If the USB device has a power switch turn the USB device off and on again after removing it from the system Then perform the transfer again If the transfer and erase operations are repeated multiple times the file structure within the USB device becomes fragmented Refer to the operating instructions supplied with the USB device on how to deal with this problem The USB device was disconnected or the power was turned off during transfer Delete the partially transferred file and perform the transfer again If this does not fix the problem the USB device may be broken Refer to the operating instructions of the USB device on how to deal with this problem Audio files or folders on the USB device cannot be erased Check if the USB device is write protected The USB device was disconnected or the power was turned off during the erase operation Delete the partially erased file If this does not fix the problem the USB device may be broken Refer to the operating instructions of the USB device on how to deal with this problem There is no sound The USB device is not connected correctly Turn off the system and reconnect the USB device then turn on the system and check if USB A or USB B lights up in the display panel There is noise skipping or distorted sound You are using an unsupported USB device Check the information on the website about compatible USB devices page 36 Turn off the
15. Press repeatedly to select the spectrum pattern you want then press To exit the options menu press OPTIONS on the unit Viewing information in the display panel Press DISPLAY repeatedly when the system is turned on You can view the information as follows For AUDIO CD The elapsed playing time and remaining playing time during playback The total playing time when playback is stopped For audio files The elapsed playing time file name and folder name The title artist and album information Note The elapsed playing time of an audio file encoded using a VBR variable bit rate is not displayed correctly Changing the illumination pattern and color Press LED PATTERN or LED COLOR to show the current setting Press repeatedly to select the illumination pattern or color on the unit and the speakers To turn off the illumination press LED PATTERN repeatedly to select LED OFF Note If the illumination brightness is glaring switch on the room lights or turn off the illumination Using the timers The system offers three timer functions You cannot activate both the Play Timer and the Recording Timer at the same time If you use either with the Sleep Timer the Sleep Timer has priority Sleep Timer You can fall asleep while listening to music The system turns off after the preset time Press SLEEP repeatedly To cancel Sleep Timer press SLEEP repeated
16. and off time of Play Timer or Recording Timer is the same PARTY GUEST The system becomes a Party Guest when Party Chain function is activated PARTY HOST The system becomes a Party Host when Party Chain function is activated PROTECTED The USB device is write protected PUSH STOP You tried to perform an operation that can be performed only when the playback is stopped READING The system is reading information of the disc or USB device Some operations are not available REC ERROR The transfer did not start stopped partway or otherwise could not be performed STEP FULL You tried to program more than 25 steps TRACK FULL You cannot transfer onto the USB device because the number of file has reached its maximum Precautions When carrying the unit Perform the following procedure to protect the disc mechanism Use the buttons on the unit to perform this operation 1 Press I to turn on the system 2 Press CD 3 Remove the disc Press amp OPEN CLOSE to open and close the disc tray Wait until NO DISC appears in the display panel 4 Unplug the power cord Notes on discs Before playing wipe the disc with a cleaning cloth from the center outward to the edge Do not clean discs with solvents such as benzine thinner or commercially available cleaners or anti static spray intended for vinyl LPs Do not expose discs to direct sunlight or heat sources such as hot air ducts nor leave it in a
17. for 81 iPhone N Bluetooth COMPACT DIGITAL AUDIO 448574611 3 2014 Sony Corporation Printed in Malaysia
18. from Microsoft or an authorized Microsoft subsidiary The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG Inc and any use of such marks by Sony Corporation is under license Other trademarks and trade names are those of their respective owners The N Mark is a trademark or registered trademark of NFC Forum Inc in the United States and in other countries Android is a trademark of Google Inc Google Play M is a trademark of Google Inc iPhone and iPod touch are trademarks of Apple Inc registered in the U S and other countries App Store is a service mark of Apple Inc Made for iPod and Made for iPhone mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards Please note that the use of this accessory with iPod or iPhone may affect wireless performance other trademarks and registered trademarks are of their respective holders In this manual TM and 9 marks are not specified About this manual The instructions in this manual are for models MHC GPX888 LBT GPX555 and MHC GPX555 In this manual the MHC GPX888 is used for illustration purpose unless stated otherwise The MHC GPX888 consists of Unit HCD GPX888 1
19. perform the following operations during transfer Eject the disc Select another track or file Pause playback or find a point in the track or file Change the function or tuner band When transferring music to a Walkman using Media Manager for WALKMAN be sure to transfer in MP3 format When connecting a Walkman to the system be sure to connect after the display Creating Library or Creating Database on the Walkman has disappeared Tuner Listening to the radio 1 Press FUNCTION repeatedly to select FM or AM band 2 For automatic scanning Hold down TUNING until the frequency indication changes and then release Scanning stops automatically when a station is tuned in TUNED and ST for FM stereo programs only light up in the display panel If TUNED does not light up and scanning does not stop press to stop scanning Then perform manual tuning below For manual tuning Press TUNING repeatedly to tune to the station you want Note When you tune to an FM station that provides RDS services information such as the service name or station name is provided by broadcasts You can check the RDS information by pressing DISPLAY repeatedly Tip To reduce static noise on a weak FM stereo station press FM MODE repeatedly until lights up in the display panel To change the AM tuning interval The default setting for AM tuning interval is
20. system and reconnect the USB device then turn on the system The music data itself contains noise or the sound is distorted Noise may have entered during the transfer process Delete the file and try transfer again The bit rate used when encoding audio files was low Send audio files with higher bit rate to the USB device READING is displayed for an extended time or it takes a long time before playback starts Thereading process can take a long time in the following cases There are many folders or files on the USB device page 17 The file structure is extremely complex The memory capacity is excessive The internal memory is fragmented OVER CURRENT appears A problem has been detected with the level of electrical current from the Y A port or Y B port Turn off the system and remove the USB device from the port Make sure there is no problem with the USB device If this display pattern persists contact your nearest Sony dealer Erroneous display The data stored in the USB device may have been corrupted perform the transfer again The character codes that can be displayed by this system are as follows Upper cases A to Z Numbers 0 to 9 Symbols lt gt Other characters appear as _ The USB device is not recognized Turn off the system and reconnect the USB device then turn on the system Check the information on the website abou
21. the information on the website about compatible USB devices page 36 To select the playback source or transfer destination USB Memory Select If the USB device has more than one memory for example an internal memory and a memory card you can select which memory to use as a playback source or transfer destination Use the buttons on the unit to perform this operation Note You cannot select a memory during playback or transfer Make sure to select a memory before starting playback or transfer 1 Press USB USB SELECT repeatedly until USB A or USB B lights up in the display panel 2 Connect a USB device to the Y A or port according to your selection in step 1 3 Press OPTIONS when playback is stopped 4 Press to select USB MEM SEL then press ENTER 5 Press to select the memory you want then press ENTER To exit the options menu press OPTIONS on the unit Playing a USB device The audio formats that can be played back by this system are as follows file extension mp3 WMA file extension wma file extension 4 mp4 or 3gp If the audio files have the above file extension but are not the respective formats the system may produce noise or may malfunction 1 Press USB repeatedly until USB A or USB B lights up in the display panel 2 Connect a USB device to the YA or y B port according to your selec
22. to eject the disc Consult your nearest Sony dealer Playback does not start Wipe the disc clean page 42 Reload the disc Load a disc that this system can play back page 36 Remove the disc and wipe away the moisture on the disc then leave the system turned on for a few hours until the moisture evaporates The sound skips Wipe the disc clean page 42 Reload the disc Move the unit to a place with no vibration e g on top of a stable stand Move the speakers away from the unit or place them on separate stands When you listen to a track with bass sounds at high volume the speaker vibration may cause the sound to skip Playback does not start from the first track Set the play mode to Normal Play page 18 The folder name track name file name and ID3 tag characters do not appear properly The ID3 tag is not Version 1 1 0 1 1 or Version 2 2 2 2 3 The character codes that can be displayed by this system are as follows Upper cases A to Z Numbers 0 to 9 Symbols lt gt _ Other characters appear as ce USB device Transferring results in an error You are using an unsupported USB device Check the information on the website about compatible USB devices page 36 The USB device is not formatted correctly Refer to the operating instructions of the USB device on how to format Turn off the system and remove the USB device
23. track or audio file you want then press Total playing time of Selected track program including or file number selected track or file rh Tia a ia al appears when the total playing time exceeds 100 minutes for an AUDIO CD or when you program an audio file 5 Repeat steps 3 to 4 to program additional tracks or audio files 6 Press B to start Program Play To delete the last step from the program list Press CLEAR when playback is stopped To cancel Program Play When playback is stopped press PLAY MODE repeatedly until PGM disappears from the display panel Notes CD function only The program list is cleared when you open the disc tray USB function only The program list is cleared when you perform the erase operation remove the USB device change the selected USB memory Playing repeatedly Repeat Play Press REPEAT repeatedly Cx repeat all tracks or audio files on a folder disc USB device program G1 repeat a track or audio file Notes on the USB device The playback order for the system may differ from the playback order of the connected digital music player You cannot erase audio files and folders in Shuffle Play or Program Play USB Transfer Transferring music You can transfer music from a sound source to a USB device connected to the Y B port The audio format of files transferred by this system is MP3
24. 5 MHz 108 0 MHz 100 kHz step Other models 87 5 MHz 108 0 MHz 50 kHz step AM tuner section Tuning range Pan American and Australian models 531 kHz 1 710 kHz 9 kHz step 530 KHz 1 710 kHz 10 kHz step Other models 531 kHz 1 602 kHz 9 kHz step 530 kHz 1 610 kHz 10 kHz step Bluetooth section Communication system Bluetooth Standard version 3 1 Output Bluetooth Standard Power Class 2 Maximum communication range Line of sight approx 10 mU Frequency band 2 4 GHz band 2 4000 GHz 2 4835 GHz Modulation method FHSS Freq Hopping Spread Spectrum Compatible Bluetooth profiles A2DP Advanced Audio Distribution Profile AVRCP 1 3 Audio Video Remote Control Profile SPP Serial Port Profile Supported codecs SBC Sub Band Codec AAC Advanced Audio Coding 1 The actual range will vary depending on factors such as obstacles between devices magnetic fields around a microwave oven static electricity reception sensitivity antenna s performance operating system SS GPX888 for MHC GPX888 SS GPX555 for LBT GPX555 555 Speaker system 2 way Bass reflex Speaker unit Woofer 200 mm 7 7 g in cone type Tweeter 20 mm 13 16 in horn type Rated impedance 4 ohms software application etc 2 Bluetooth standard profiles indicate the a purpose of Bluetooth communication between devices S D Speakers Front speaker Sg 3 2 4508 Dimensions w h d Approx SS
25. 88 Remote control RM AMU199 1 0 on standby Turn on the system or set it to standby mode Disc tray OPEN CLOSE Insert or eject a disc N Mark page 24 Near Field Communication NFC touchpoint indication Display panel Unit VOLUME DJ CONTROL Adjust the volume Adjust the DJ EFFECT level page 30 You cannot use this knob to adjust the volume when the DJ EFFECT is activated Remote control DJ CONTROL Adjust the DJ EFFECT level Remote control VOLUME Adjust the volume LED COLOR page 33 Change the illumination color on the speakers and the unit LED PATTERN page 33 Change the illumination pattern on the speakers and the unit 4lv gt Select the menu items Remote control PRESET Select a preset station during TUNER function select folder Select a folder on an MP3 disc or a USB device Unit only Select a preset station during TUNER function lt lt gt gt rewind fast forward Hold down to find a point in a track or file during playback 4 P1 go back go forward Select a track or file TUNING Tune to the station you want during TUNER function Bi stop Stop playback Press twice to cancel resume playback of the USB device Unit ENTER Remote control Enter the settings Unit II play pause Remote control
26. Any system can become a Party Host in this connection e You can select a new Party Host when Party Chain function is activated For details see To select a new Party Host page 32 n this connection the last system must be connected to the first system E If one of the system is not equipped with Party Chain function AUDIO AUDIO our Nt First system QO 00 AUDIO Nt Second H system g Continue the connection until the last system Last system When you make connection e You connect the system which is not equipped with Party Chain function at the last system Be sure to select the function which corresponds to the AUDIO IN jacks on the last system You must select the first system as Party Host so that all systems are playing the same music when Party Chain function is activated In this connection the last system is not connected to the first system Enjoying the Party Chain Perform the following procedure to activate the Party Chain function 1 Plug in the power cord and turn on all the systems 2 Adjust the volume on each system 5 19410 3148 3268 3 Activate the Party Chain function on the system which you want it to be the Party Host Press FUNCTION repeatedly to select the function except AU
27. DIO IN 1 you want then start playback Hold down MUSIC PARTY CHAIN on the unit for 2 seconds PARTY CHAIN appears in the display panel The system starts the party as Party Host and other systems will become Party Guest automatically All systems play the same music as the Party Host Notes Depending on the total unit of systems you have connected Party Guest may take some time to start playing the music Changing the volume level and sound effect on the Party Host will not affect the output on the Party Guest The Party Guest continues playing the music source as Party Host even when you change the function on Party Guest However you can adjust the volume and change the sound effect on Party Guest MHC GPX88S only When you use the microphone on Party Host the sound will not be output from Party Guest The system which is not equipped with Party Chain function cannot become a Party Host When Party Chain function is activated while one of the system in the connection is performing USB transfer the Party Chain function will not be activated on that system and the systems connected after it Party Chain function will only be activated after that system completed or stopped the USB transfer For details on the operations of other systems refer to the operating instructions of the systems To select a new Party Host When you make connection PN you can select another system as the new Party Host Repeat ste
28. GPX888 360 mm x 605 mm x 320 mm 14 1 4 in x 23 7 g in x 12 5 g in SS GPX555 290 mm x 415 mm x 320 mm 11 2 in x 16 3 g in x 12 5 8 in Mass Approx SS GPX888 13 8 kg 30 lb 7 oz SS GPX555 8 5 kg 18 Ib 12 oz Quantity 2 pieces Subwoofer SS WGP888 for MHC GPX888 SS WGP555 for LBT GPX555 MHC GPX555 Subwoofer system 1 way Bass reflex Speaker unit Subwoofer 250 mm 9 7 in cone type Rated impedance 4 ohms Dimensions w h d Approx 360 mm x 395 mm x 320 mm 14 1 4 in x 15 5 g in x 12 5 8 in Mass Approx SS WGPS888 8 3 kg 18 Ib 5 oz SS WGP555 8 7 kg 19 Ib 3 oz Quantity 888 2 pieces LBT GPX555 MHC GPX555 1 piece General Power requirements USA model AC 120 V 60 Hz Mexican model AC 120 V 240 V 60 Hz Chilean and Bolivian models AC 220 V 240 V 50 Hz Other models AC 120 V 240 V 50 60 Hz Power consumption MHC GPX888 360 W LBT GPX555 MHC GPX555 280 W Dimensions w h d excl speakers Approx MHC GPX888 294 mm x 361 mm x 331 mm 11 5 g in x 14 1 4 in x 13 1 g in LBT GPX555 MHC GPX555 294 mm x 361 mm x 325 mm 11 5 8 in x 14 1 4 in x 12 7 g in Mass excl speakers Approx 5 4 kg 11 Ib 15 oz Supplied accessories Remote control 1 R6 Size AA batteries 2 FM lead AM loop antenna 1 Spacer 2 MHC GPX888 only Speaker pads 16 MHC GPX888 only Design and specifications are subject to change without notice http www sony net Made
29. However you can also transfer WMA and AAC files from USB A Notes Do not remove the USB device during transfer or erase operations Doing so may corrupt the data on the USB device or damage the USB device itself MP3 WMA AAC files are transferred with the same bit rate as the original files When transferring from an AUDIO CD TUNER AUDIO IN 1 or AUDIO IN 2 function you may select the bit rate before transferring USB transfer and erase operations are disabled while the disc tray is open Note on copyright protected content The transferred music is limited to private use only Use of the music beyond this limit requires permission of the copyright holders To select the playback source or transfer destination USB Memory Select See page 16 To select the hit rate You can select a higher bit rate to transfer music with better quality Use the buttons on the unit to perform this operation 1 Press OPTIONS JejsueJ GSN 1998 2058 2 Press repeatedly to select REC BIT RATE then press ENTER 3 Press repeatedly to select the bit rate you want then press ENTER 128 KBPS encoded MP3 tracks have smaller file size and lower audio quality 256 KBPS encoded MP3 tracks have bigger file size but higher audio quality To exit the options menu press OPTIONS on the unit Transferring music from a disc or USB device You can easily transfer all the music on a disc or USB A to USB B
30. Synchronized Transfer You can also transfer a single track or audio file during playback RECI Transfer Use the buttons on the unit to perform this operation 1 Connect a transferable USB device to the B port as shown below 55 USB device 2 For disc Press CD then load the disc For USB Press USB USB SELECT repeatedly until USB A lights up in the display panel then connect the USB device containing audio files you want to transfer to Y A port 3 For Synchronized Transfer When playback is stopped press PLAY MODE on the remote control repeatedly to select the play mode you want Notes If you start transferring in Shuffle Play FLDR SHUF the selected play mode changes to FLDR automatically If you start transferring in Shuffle Play except FLDR SHUF Repeat Play or Program Play with no steps the selected play mode changes to Normal Play automatically For REC1 Transfer Select the track or audio file you want to transfer then start playback Press REC TO USB PUSH ENTER appears in the display panel 5 Press ENTER The transfer starts when DON T REMOVE appears in the display panel For Synchronized Transfer When the transfer is completed the transfer source and the USB device stop automatically For REC1 Transfer When the transfer is completed the disc or the USB device continues to play Transferring analog audio
31. ZUCA again Notes When BASS CUT effect is turned on BASS BAZUCA indicator flashes and BASS CUT appears in the display panel every 10 seconds The BASS CUT effect is turned off automatically when you turn off the system Selecta preset Press MUSIC or MOVIE sound effect GAME To cancel preset sound effect press MUSIC repeatedly to select FLAT To adjust the subwoofer level 1 Press OPTIONS on the unit 2 Press repeatedly to select SUBWOOFER then press 3 3 Press repeatedly to select the subwoofer level then press Q To exit the options menu press OPTIONS on the unit Selecting the Virtual Football mode You can experience a feeling of presence in the stadium when watching the football match broadcast Press FOOTBALL repeatedly while watching a football match broadcast NARRATION ON You can enjoy an immersive feeling of being in a football stadium through enhanced stadium cheers NARRATION OFF You can enjoy a more immersive feeling of being in a football stadium by minimizing the volume level of narration in addition to the enhancement of cheers To cancel the Virtual Football mode Press MUSIC repeatedly to select FLAT Notes We recommend you to select the football mode when watching a football match broadcast If you hear unnatural sound in the content when NARRATION OFF is selected NARRATION ON is recommended You can only select the V
32. connector straight into the terminals 3 Power Plug the power cord into a wall socket The demonstration appears in the display panel Press I D to turn on the system and the demonstration automatically ends If the supplied adaptor on the plug does not fit your wall outlet detach it from the plug only for models equipped with an adaptor Inserting batteries Insert the two supplied R6 size AA batteries matching the polarities as shown below Notes Do not mix an old battery with a new one or mix different types of batteries If you do not use the remote control for a long period of time remove the batteries to avoid damage from battery leakage and corrosion Attaching the speaker pads MHC GPX888 only The speaker pads are pre installed in vertical position to stabilize the speakers and to prevent them from slipping If you want to place the speakers in horizontal positioning page 14 attach the supplied speaker pads to the bottom of the speakers as shown below Front speaker IN Nu ll Cs Subwoofer Positioning the speakers To obtain optimum performance from the system we recommend you to place the speakers as shown below Unit Front speaker left Front speaker right Subwoofer left Subwoofer right Subwoofer Spacer MHC GPX888 only Vertical positioning SONY SONY emblem emblem ae Sh elei ree 0 3 m 1 foot
33. dec Connecting a smartphone with one touch NFC What is NFC NFC Near Field Communication is a technology enabling short range wireless communication between various devices such as smartphones and IC tags Thanks to the NFC function data communication can be achieved easily just by touching the designated touchpoint on the NFC compatible devices When you touch the system with an NFC compatible smartphone the system automatically turns on in Bluetooth function completes pairing completes the Bluetooth connection 1 Download and install the NFC Easy Connect app Download the free Android app from Google Play by searching for NFC Easy Connect or access it by using the two dimensional code below Data communication fees may be charged Two dimensional code for direct access Use a two dimensional code reader app Notes The app may not be available in some countries regions Depending on your smartphone you can use the NFC function without installing the app In this case the operations and specifications may differ For details refer to the operating instructions of your smartphone Compatible smartphones Smartphones with a built in NFC function OS Android 2 3 3 or later excluding Android 3 x 2 Start the NFC Easy Connect app on the smartphone Make sure that the application screen is displayed 3 Touch the smartphone to the N Mark on the system u
34. en spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna 36B Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment Properly shielded and grounded cables and connec
35. ere hum or noise or stations cannot be received TUNED or ST flashes in the display panel Connect the antenna properly Change the antenna location and its orientation to obtain good reception Connect a commercially available external antenna Consult your nearest Sony dealer if the supplied AM antenna has come off from the plastic stand Turn off surrounding electrical equipment Bluetooth device Pairing cannot be performed Move the Bluetooth device closer to the system Pairing may not be possible if other Bluetooth devices are present around the system In this case turn off the other Bluetooth devices Make sure the correct passkey was entered at the Bluetooth device The Bluetooth device cannot detect this unit or OFF appears in the display panel Set the Bluetooth signal to ON page 27 Connection is not possible The Bluetooth device you attempted to connect does not support the A2DP profile and cannot be connected with the system Enable the Bluetooth function of the Bluetooth device Establish a connection from the Bluetooth device The pairing registration information has been erased Perform the pairing operation again Erase the pairing registration information of the Bluetooth device page 27 and perform the pairing operation again page 25 The sound skips or fluctuates or the connection is lost The system and t
36. h device will be disconnected To disconnect the Bluetooth device Press BLUETOOTH on the unit BLUETOOTH appears in the display panel Depending on the Bluetooth device the Bluetooth connection may be canceled automatically when you stop playback Erasing all the pairing registration information Use the buttons on the unit to perform this operation 1 Press BLUETOOTH to select Bluetooth function BLUETOOTH appears in the display panel If the system is connected to a Bluetooth device the Bluetooth device name appears in the display panel Press BLUETOOTH to disconnect the Bluetooth device 2 Hold down and WAH for about 3 seconds PAIR HISTORY and CLEAR appear in the display panel and all the pairing information is erased Setting the Bluetootli standby mode The Bluetooth standby mode enables the system to turn on automatically when you establish the Bluetooth connection from a Bluetooth device 1 Press OPTIONS on the unit 2 Press repeatedly to select BT STANDBY then press Q 3 Press repeatedly to select STANDBY ON or STANDBY OFF 4 Press I to turn off the system When the Bluetooth standby mode is set to on the system waits for a Bluetooth connection even when the system has been turned off When a Bluetooth connection is established the system turns on automatically ujoojenig Setting the Bluetootli signal You can connect to the system from a paired
37. h SIG Inc and must be certified to comply However even when a device complies with the Bluetooth specification there may be cases where the characteristics or specifications of the Bluetooth device make it impossible to connect or may result in different control methods display or operation Noise may occur or the audio may cut off depending on the Bluetooth device connected with this system the communications environment or surrounding conditions uoneuauoju EUONIPpY 439 4465 Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION USA model only With 4 ohm loads both channels driven from 120 10 000 Hz rated 180 watts per channel minimum RMS power with no more than 0 796 total harmonic distortion from 250 milliwatts to rated output Amplifier section The following are measured at USA model AC 120 V 60 Hz Mexican model AC 120 V 240 V 60 Hz Chilean and Bolivian models AC 220 V 240 V 50 Hz Other models AC 120 V 240 V 50 60 Hz MHC GPX888 Front speaker Power Output rated 350 W 350 W at 4 ohms 1 kHz 196 THD RMS output power reference 600 W 600 W per channel at 4 ohms 1 kHz Subwoofer RMS output power reference 600 W 600 W per channel at 4 ohms 100 Hz LBT GPX555 MHC GPX555 Front speaker Power Output rated 350 W 350 W at 4 ohms 1 kHz 1 THD RMS output power reference 600 W 600 W per channel a
38. he Bluetooth device are too far apart If there are obstacles between the system and your Bluetooth device remove or avoid the obstacles f there is equipment that generates electromagnetic radiation such as a wireless LAN other Bluetooth device or a microwave oven nearby move them away The sound of your Bluetooth device cannot be heard on this system ncrease the volume on your Bluetooth device first then adjust the volume using VOLUME There is severe hum noise or distorted sound f there are obstacles between the system and your Bluetooth device remove or avoid the obstacles f there is equipment that generates electromagnetic radiation such as a wireless LAN other Bluetooth device or a microwave oven nearby move them away Turn down the volume of the connected Bluetooth device Party Chain Party Chain function cannot be activated Check the connections page 30 Make sure the audio cords are connected correctly PARTY CHAIN is flashing in the display panel AUDIO IN 1 function is selected during Party Chain function Press FUNCTION repeatedly to select other function Restart the system Party Chain function does not operate properly Turn off the system Then turn on the system and activate the Party Chain function To reset the system If the system still does not operate properly reset the system to factory default settings Use the butto
39. irtual Football mode during AUDIO IN 1 or AUDIO IN 2 function This feature does not support monaural sound Creating your own sound effect You can raise or lower the levels of specific frequency bands then store the setting in the memory as CUSTOM EQ 1 Press OPTIONS on the unit 2 Press repeatedly to select EQ EDIT then press 3 Press repeatedly to adjust the equalizer level then press Frequency band o Equalizer level 1 sti 4 Repeat step 3 to adjust the level of other frequency bands and surround effect To exit the options menu press OPTIONS on the unit To select the custom equalizer setting Press MUSIC repeatedly to select CUSTOM EQ jueunsn py punos 2968 3058 Creating a party atmosphere DJ EFFECT 1 Press the following button to select the effect type The selected button lights up and the effect is activated FLANGER Create a deep flanging effect that is similar to the roar of a jet plane ISOLATOR Isolate a specific frequency band by adjusting the other frequency bands For example when you want to focus on vocals PAN Create a feeling that the sound is moving around the speakers between left and right channels WAH Create a special effect of Wah wah sound by moving the frequency of a filter up and down automatically 2 Press DJ CONTROL to adjust the effect le
40. isplay panel Note Child Lock function will be canceled when you disconnect the power cord Setting the automatic standby function This system is equipped with an automatic standby function With this function the system enters standby mode automatically in about 15 minutes when there is no operation or audio signal output By default the automatic standby function is turned on 1 Press OPTIONS on the unit 2 Press repeatedly to select AUTO STANDBY then press 3 Press repeatedly to select or OFF To exit the options menu press OPTIONS on the unit Notes The message AUTO STANDBY flashes in the display about 2 minutes before entering standby mode The automatic standby function does not work during tuner function The system may not enter standby mode automatically in the following cases when an audio signal is detected during playback of audio files while the preset Play Timer Recording Timer or Sleep Timer is in process MHC GPX888 only when microphone is connected 19u10 9568 3658 Additional Information Playable discs AUDIO CD CD R CD RW audio data files that conform to ISO9660 Level 1 Level 2 or Joliet expansion format Notes MP3 MPEG 1 Audio Layer 3 is a standard format defined by ISO International Organization for Standardization which compresses audio data MP3 files mu
41. ly to select SLEEP OFF Tip To check the remaining time before the system turns off press SLEEP 19410 33 GB 34 Play Timer Recording Timer Make sure you have set the clock Play Timer You can wake up to disc tuner or USB device at a preset time Recording Timer You can transfer music from a preset radio station to a USB device at a specified time 1 For Play Timer Prepare the sound source then press VOLUME to adjust the volume To start from a specific track or file create your own program page 18 For Recording Timer Tune to the preset radio station page 23 2 Press TIMER MENU 3 Press repeatedly to select PLAY SET or REC SET then press 4 Set the time to start playback or transfer Press repeatedly to set the hour minute then press Q 5 Use the same procedure as in step 4 to set the time to stop playback or transfer 6 Press repeatedly to select the sound source you want then press For Recording Timer Connect a transferable USB device to the Y B port 7 Press I to turn off the system Note If the system remains on the timers will not take effect To check the timer setting or activate the timer again 1 Press TIMER MENU TIMER SELECT flashes in the display panel 2 Press 3 Press repeatedly to select PLAY SELECT or REC SELECT then press 3 To cancel the timer Repeat the sa
42. me procedure as above and select TIMER OFF in step 3 then press Notes The system turns on before the preset time If the system is turned on at the preset time or if STANDBY flashes in the display panel the Play Timer and the Recording Timer will not play or transfer Do not operate the system from the time the system turns on until the playback or transfer starts Using optional equipment 1 Press VOLUME repeatedly until VOLUME MIN appears in the display panel 2 Connect an optional equipment page 11 3 Press FUNCTION repeatedly to select the function which corresponds to the connected equipment 4 Start playing the connected equipment 5 Press VOLUME repeatedly to adjust the volume Note The system may enter standby mode automatically if the volume level of the connected equipment is too low Adjust the volume level of the equipment To turn off automatic standby function see Setting the automatic standby function page 35 Deactivating the buttons on the unit Child Lock You can deactivate the buttons on the unit except I 5 to prevent misoperation such as child mischief Hold down lil on the unit for more than 5 seconds CHILD LOCK and ON appear in the display panel You can only operate the system using the buttons on the remote control To cancel hold down on the unit for more than 5 seconds until CHILD LOCK and OFF appear in the d
43. mote control does not function Remove the obstacles between the remote control and the unit Move the remote control closer to the unit Point the remote control at the unit s sensor Replace the batteries R6 size AA Move the unit away from the fluorescent light There is acoustic feedback Reduce the volume e MHC GPX888 only Move the microphone away from the speakers or change the direction of the microphone CHILD LOCK appears when you press any button on the unit Set the Child Lock function to off page 35 Euonippv 3768 3848 Speakers Sound comes from only one channel or the left and right volume is unbalanced Place the speakers as symmetrically as possible Check that the speakers are connected securely and correctly The source being played back is monaural There is no sound from a specific speaker Check that the speaker is connected securely and correctly Set the subwoofer level to the appropriate level page 28 Disc player The disc tray does not open and LOCKED appears in the display panel Consult your nearest Sony dealer or local authorized Sony service facility The disc tray does not close Load the disc correctly The disc does not eject You cannot eject the disc during CD USB Synchronized Transfer or RECI Transfer Press to cancel the transfer then press amp OPEN CLOSE on the unit
44. ns on the unit to perform this operation 1 Unplug and plug the power cord back in 2 Press I to turn on the system 3 Hold down lil and MOVIE GAME for about 3 seconds RESET appears in the display panel user configured settings such as preset radio stations timers and the clock are reset to factory default setting Messages One of the following messages may appear or flash in the display panel during operation CANNOT PLAY A disc that cannot be played back was inserted DEVICE ERROR The USB device could not be recognized or an unknown device is connected DEVICE FULL The memory of the USB device is full FATAL ERROR The USB device was removed during transfer or erase operation and may have been damaged FOLDER FULL You cannot transfer onto the USB device because the number of folder has reached its maximum NO DEVICE No USB device is connected NO DISC There is no disc on the disc tray Euonippv 4165 4265 NO MEMORY The memory selected for playback or transfer has no memory media inserted in the USB device NO STEP of the programmed steps have been erased NO TRACK No playable file is loaded in the system NOT IN USE You tried to perform a specific operation under conditions where that operation is prohibited NOT SUPPORTED Anunsupported USB device is connected or the USB device is connected through a USB hub OFF TIME NG The on time
45. ntil the smartphone vibrates Complete the connection by following the instructions displayed on the smartphone When the Bluetooth connection is established the BLUETOOTH indicator stops flashing and remains light up Bluetooth device name appears in the display panel You can switch the sound source from the smartphone to another NFC compatible Bluetooth device For details refer to the operating instructions of your Bluetooth device Tip If pairing and the Bluetooth connection fail do the following Relaunch NFC Easy Connect and move the smartphone slowly over the N Mark Remove the case from the smartphone if using a commercially available smartphone case To play music from the smartphone Start playing of an audio source on the smartphone For details on playback refer to the operating instructions of your smartphone To disconnect the smartphone Touch the smartphone to the N Mark on the system again Listening to music wirelessly on a Bluetooth device You can listen to music from your Bluetooth device over a wireless connection uyjoojenig Check the information on the website about compatible Bluetooth devices page 36 Pairing this system with a Bluetooth device Pairing is an operation where Bluetooth devices register with each other beforehand Once a pairing operation is performed it does not need to be performed again If your device is an NFC compatible smartphone
46. on that provide good reception when you set up the antennas Keep the antennas away from the speaker cords the power cord and the USB cable to avoid picking up noise 25 Extend the FM lead antenna horizontally wl 2 AM loop E LED SPEAKER terminals Connectthe LED SPEAKER connector of the speaker to this terminal The lighting on the speakers will react according to the music source You can select the illumination pattern and color according to your preference page 33 Example ET 2 Audio Use an audio cord not supplied to make either connection as follows AUDIO OUT PARTY CHAIN OUT L R jacks Connect to the audio input jacks of an optional equipment Connect to another audio system to enjoy the Party Chain function page 30 AUDIO IN 1 PARTY CHAIN IN L R jacks Connect to the audio output jacks of a TV or an audio video equipment The sound is output through this system Connect to another audio system to enjoy the Party Chain function page 30 AUDIO IN 2 L R jacks Connect to the audio output jacks of a computer or gaming device The sound is output through this system FRONT SPEAKERS and SUBWOOFER S terminals Connect the speaker connectors to match the color of the speaker terminals of the unit Example Notes Be sure to use only the supplied speakers When connecting speaker cords insert the
47. p 3 of Enjoying the Party Chain on the system which you want it to be a new Party Host The current Party Host will become Party Guest automatically All systems play the same music as the new Party Host Notes You can only select another system as the new Party Host after all the systems have completed the Party Chain function Repeat the step above if the selected system does not change as a new Party Host after a few seconds To deactivate the Party Chain On the Party Host hold down MUSIC PARTY CHAIN on the unit for 2 seconds Note Repeat the step above if the system does not deactivate the Party Chain after a few seconds Singing along MHC GPX888 only You can sing along with any audio source that is playing on this system 1 Turn Mic LEVEL to MIN to reduce the microphone volume level 2 Connect a microphone to the MIC jack on the unit 3 Start playing the music and adjusting the volume 4 Turn MIC LEVEL to adjust the microphone volume If acoustic feedback howling occurs reduce the volume move the microphone away from the speakers or change the direction of the microphone After you have finished disconnect the microphone Note The sound from the microphone will not be transferred to the USB device during USB transfer Changing the spectrum pattern of the display panel 1 Press OPTIONS on the unit 2 Press repeatedly to select SPECTRUM then press 3
48. play pause Start or pause playback To resume playback press B or p 968 10 10 11 12 13 MUSIC MOVIE GAME Select the preset sound effect page 28 FOOTBALL Select the Virtual Football mode page 29 Unit PARTY CHAIN page 30 Hold down to activate or deactivate the Party Chain function Unit BASS BAZUCA page 28 Press to select the BASS BAZUCA effect Hold down to select the BASS CUT effect CD Select the CD function Unit USB USB SELECT Remote control USB Select the USB function Select the USB device connected to the y A or y B port during USB function Unit TUNER BAND Select the TUNER function Select the FM or AM band during TUNER function Unit AUDIO IN Select the AUDIO IN 1 or AUDIO IN 2 function Remote control FUNCTION Select a function REC TO USB B Transfer music to the optional USB device which is connected to the Y B port Y USB B REC PLAY port Connect and transfer to an optional USB device MIC jack Connect a microphone MIC LEVEL MIN MAX Adjust the microphone volume 14 USB A PLAY port Connect an optional USB device 15 FLANGER ISOLATOR PAN WAH page 30 Select the DJ EFFECT type 16 BLUETOOTH page 25 26 Press to select Bluetooth function Hold down to activate Bluetooth pairing during Bluetooth function 17 OPTIONS Enter or exit options menu
49. ration is normal and is not a cause for alarm Do not touch the cabinet if it has been used continuously at a high volume because the cabinet may have become hot Do not obstruct the ventilation holes On the speaker system This speaker system is not magnetically shielded and the picture on nearby TV sets may become magnetically distorted In this situation turn off the TV wait 15 to 30 minutes and turn it back on If there is no improvement move the speakers far away from the TV Cleaning the cabinet Clean this system with a soft cloth slightly moistened with a mild detergent solution Do not use any type of abrasive pad scouring powder or solvent such as thinner benzine or alcohol On Bluetooth Communication Bluetooth devices should be used within approximately 10 meters 33 feet unobstructed distance of each other The effective communication range may become shorter under the following conditions When a person metal object wall or other obstruction is between the devices with a Bluetooth connection Locations where a wireless LAN is installed Around microwave ovens that are in use Locations where other electromagnetic waves occur Bluetooth devices and wireless LAN IEEE 802 11b g use the same frequency band 2 4 GHz When using your Bluetooth device near a device with wireless LAN capability electromagnetic interference may occur This could result in lower data transfer ra
50. st be in MPEG 1 Audio Layer 3 format The system can only play back MP3 files that have a file extension of mp3 Discs that cannot be played back CD ROM CD R CD RW which has the following conditions Recorded in MP3 PRO format Recorded in multisession that was not ended by closing the session Recorded with an incompatible recording device Poor recording quality Scratched or dirty Finalized incorrectly Discs of non standard shape e g heart square star etc Discs that have adhesive tape paper or sticker attached to them Rental or used discs with attached seals where the glue extends beyond the seal Discs that have labels printed using ink that feels tacky when touched Note on DualDiscs A DualDiscs is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side However since the audio material side does not conform to the Compact Disc CD standard playback on this product is not guaranteed Music discs encoded with copyright protection technologies This product is designed to play back discs that conform to the Compact Disc CD standard Recently various music discs encoded with copyright protection technologies are marketed by some record companies Please be aware that among those discs there are some that do not conform to the CD standard and may not be playable by this product Notes on playing mul
51. t 4 ohms 1 kHz Subwoofer RMS output power reference 600 W 4 ohms 100 Hz Inputs AUDIO IN 1 PARTY CHAIN IN L R Voltage 2 V impedance 47 kilohms AUDIO IN 2 L R Voltage 2 V impedance 47 kilohms MIC MHC GPX888 only Sensitivity 1 mV impedance 10 kilohms Y USB USB B port Type A Outputs AUDIO OUT PARTY CHAIN OUT L R Voltage 2 V impedance 1 kilohm USB section Supported bit rate WMA 48 kbps 192 kbps VBR CBR AAC 48 kbps 320 kbps VBR CBR Sampling frequencies WMA 44 1 kHz AAC 44 1 kHz Supported USB device Mass Storage Class Maximum current 500 mA Disc USB section Supported bit rate MPEGI Layer 3 32 kbps 320 kbps VBR MPEG Layer 3 8 kbps 160 kbps VBR MPEGI Layer 2 32 kbps 384 kbps VBR Sampling frequencies MPEGI Layer 3 32 kHz 44 1 kHz 48 kHz MPEG Layer 3 16 2 22 05 kHz 24 kHz MPEGI Layer 2 32 kHz 44 1 kHz 48 kHz Disc player section System Compact disc and digital audio system Laser Diode Properties Emission Duration Continuous Laser Output Less than 44 6 uW This output is the value measurement at a distance of 200 mm from the objective lens surface on the Optical Pick up Block with 7 mm aperture Frequency response 20 Hz 20 kHz Signal to noise ratio More than 90 dB Dynamic range More than 88 dB Tuner section FM stereo FM AM superheterodyne tuner Antenna FM lead antenna AM loop antenna FM tuner section Tuning range USA model 87
52. t compatible USB devices page 36 The USB device does not work properly Refer to the operating instructions of the USB device on how to deal with this problem Playback does not start Turn off the system and reconnect the USB device then turn on the system Check the information on the website about compatible USB devices page 36 uoneuuoju jeuonippv 3968 40 Playback does not start from the first file Set the play mode to Normal Play page 18 Audio file cannot be played back USB devices formatted with file systems other than FAT16 or FAT32 are unsupported A WMA audio file that is the WMA DRM WMA Lossless or WMA PRO format cannot be played back An AAC audio file that is the AAC DRM or AAC Lossless format cannot be played back AAC audio files encoded at 96 kHz cannot be played back If multiple partitions exist on a USB device that is being used files may not be played back The system can play back to a depth of 8 folders only Files that are encrypted or protected by passwords cannot be played back Files with DRM Digital Rights Management copyright protection cannot be played back by this system The MP3 PRO audio file can be played back as MP3 audio file This system supports FAT16 and FAT32 but some USB devices may not support all of these FAT For details refer to the operating instructions of each USB device or contact the manufacturer Tuner There is sev
53. t your nearest Sony dealer General The system has entered standby mode This is not a malfunction The system enters standby mode automatically in about 15 minutes when there is no operation or audio signal output page 35 The clock or timer setting is canceled The power cord is disconnected or a power failure occurred Set the clock page 15 and timer page 33 again There is no sound Adjust the volume Check the speaker connections page 11 Check the connection of the optional equipment if any page 11 Turn on the connected equipment Unplug the power cord then plug in the power cord again and turn on the system There is no audio output during Recording Timer There is no microphone sound MHC GPX888 only Adjust the microphone volume Make sure the microphone is connected to the MIC jack correctly Make sure the microphone is turned on There is severe hum or noise Move the system away from sources of noise Connect the system to a different wall outlet nstall a noise filter commercially available to the power cord Turn off surrounding electrical equipment You can hear a noise from cooling fans when the system is in standby mode or playback at low volume This is not a malfunction The timer does not function Check the timer setting and set the correct time page 33 Cancel the Sleep Timer function page 33 The re
54. tes noise or inability to connect If this happens try the following remedies Try connecting this system and Bluetooth device when you are at least 10 meters 33 feet away from the wireless LAN equipment Turn off the power to the wireless LAN equipment when using your Bluetooth device within 10 meters 33 feet Theradio waves broadcast by this system may interfere with the operation of some medical devices Since this interference may result in malfunction always turn off the power on this system and Bluetooth device in the following locations In hospitals on trains in airplanes at gas stations and any place where flammable gases may be present Near automatic doors or fire alarms This system supports security functions that comply with the Bluetooth specification as a means of ensuring security during communication using Bluetooth technology However this security may be insufficient depending on the setting contents and other factors so always be careful when performing communication using Bluetooth technology Sony cannot be held liable in any way for damages or other loss resulting from information leaks during communication using Bluetooth technology Bluetooth communication is not necessarily guaranteed with all Bluetooth devices that have the same profile as this system Bluetooth devices connected with this system must comply with the Bluetooth specification prescribed by the Bluetoot
55. the manual pairing procedure is not necessary 1 Place the Bluetooth device within 1 meter 3 feet from the system 2568 2658 2 Press BLUETOOTH on the unit to select Bluetooth function BLUETOOTH appears in the display panel Note If the system is connected to a Bluetooth device press BLUETOOTH to disconnect the Bluetooth device 3 Hold down BLUETOOTH on the unit for 2 seconds or more PAIRING flashes in the display panel 4 Perform the pairing procedure on the Bluetooth device For details refer to the operating instructions of your Bluetooth device 5 Select the model number of the unit on the display of the Bluetooth device For example select SONY MHC GPX888 or LBT GPX555 MHC GPX555 If passkey is required on the Bluetooth device enter 0000 6 Perform the Bluetooth connection on the Bluetooth device When pairing is completed and the Bluetooth connection is established Bluetooth device name appears in the display panel Depending on the Bluetooth device connection may start automatically after pairing is completed You can check the Bluetooth device address by pressing DISPLAY repeatedly Notes You can pair up to 9 Bluetooth devices If the 10th Bluetooth device is paired the oldest paired device will be deleted Passkey may be called Passcode PIN code PIN number or Password etc depending on the device The pairing standby status of
56. the system is canceled after about 5 minutes If pairing is not successful repeat from step 1 If you want to pair with another Bluetooth device repeat steps 1 to 6 To cancel the pairing operation Hold down BLUETOOTH on the unit for 2 seconds or more until BLUETOOTH appears in the display panel Playing music from a Bluetooth device You can operate a Bluetooth device by connecting the system and the Bluetooth device using AVRCP Check the following before playing music 1 The Bluetooth function of the Bluetooth device is turned on Pairing has been completed Press BLUETOOTH on the unit to select Bluetooth function BLUETOOTH appears in the display panel 2 Establish connection with the Bluetooth device Press BLUETOOTH on the unit to connect to the last connected Bluetooth device Perform the Bluetooth connection from the Bluetooth device if the device is not connected Once the connection is established the Bluetooth device name appears in the display panel 3 Press B to start playback Depending on the Bluetooth device you may need to press B twice you may need to start playing an audio source on the Bluetooth device Notes When the system is not connected to any Bluetooth device the system will connect to the last connected Bluetooth device automatically when you press B If you try to connect another Bluetooth device tothe system the current connected Bluetoot
57. tion in step 1 Note You can use your iPhone iPod with this system via Bluetooth connection only 3 Press to start playback The audio files are played back in different orders depending on the play mode page 18 Searching for a track or audio file Track Search 1 Press SEARCH SEARCH lights up in the display panel 2 Audio files only Press to select the folder you want then press gt To search in other folders press to exit then select the folder you want 3 Press to select the track or audio file you want then press or The selected track or audio file starts playback xyoegf eld gsn osiq Notes on disc For AUDIO CD This system can recognize up to 99 tracks For MP3 disc This system can recognize up to 999 folders including root and empty folders 999 MP3 files 250 MP3 files in a folder 8 folders levels tree structure of files CD TEXT information is not supported Notes on USB device This system can recognize up to 1 000 folders in a USB device including root and empty folders 3 000 audio files in a USB device 250 audio files in a folder 1798 1892 Using play mode Playing in original order Normal Play Press PLAY MODE repeatedly when playback is stopped When playing a disc blank play a disc FLDR play all audio files in the specified folder on the disc When playing an
58. tions 5 Do not use this apparatus near water 6 Clean only with dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Wey 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has be
59. tisession discs This system can play back multisession discs when an MP3 file is contained in the first session Any subsequent MP3 files recorded in later sessions can also be played back If later sessions contain AUDIO CD format the system cannot play back this multisession discs If the first session is recorded in AUDIO CD format only the first session will be played back Websites for compatible devices Check the websites below for the latest information about compatible USB devices and Bluetooth devices For customers in Latin America lt http esupport sony com LA gt For customers in the United States lt http esupport sony com gt For customers in other countries regions lt http www sony asia com support gt Troubleshooting Should you encounter a problem with your system find your problem in the troubleshooting checklist below and take the corrective action If the problem persists consult your nearest Sony dealer Note that if the service personnel changes some parts during repair these parts may be retained If PROTECT EXX X is a number appears in the display panel Immediately unplug the power cord and check the following items Are you using only the supplied speakers s anything blocking the ventilation holes of the unit After checking the above items and fixing any problems plug in the power cord again and turn on the system If the issue persists consul
60. tors must be used for connection to host computers and or peripherals in order to meet FCC emission limits Compact Disc Receiver HCD GPX888 HCD GPX555 This equipment must not be co located or operated in conjunction with any other antenna or transmitter This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency RF Exposure Guidelines This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation MPE But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from person s body excluding extremities hands wrists feet and ankles For customers in Australia Disposal of Old Electrical amp Electronic Equipment Applicable in the European Union and em other European countries with separate collection systems License and Trademark Notice WALKMAN and WALKMAN logo are registered trademarks of Sony Corporation MPEG Layer 3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and or other countries This product is protected by certain intellectual property rights of Microsoft Corporation Use or distribution of such technology outside of this product is prohibited without a license
61. vel To turn off the effect Press the selected effect button again Notes The DJ EFFECT is automatically turned off when you turn off the system or change the function or tuner band If you activate the DJ EFFECT during transfer the sound effect will not be transferred to the USB device You cannot use VOLUME DJ CONTROL on the unit to adjust the volume when the DJ EFFECT is activated Press VOLUME on the remote control to adjust the volume Other Operations Using the Party Chain function You can connect multiple audio systems in a chain to create a more interesting party environment and to produce higher sound output Activate a system in the chain to be the Party Host and share the music Other systems will become Party Guest and play the same music as the Party Host Setting up the Party Chain You can set up a Party Chain by connecting all the systems using audio cords not supplied Before connecting cords be sure to disconnect the power cord If all the systems are equipped with Party Chain function pm m QUT IN First system our PARTY CHAIN AUDIO AUDIO OUT 1 Second system ARTY CHAIN Continue the connection until the last system upto OUT 1 Last system When you make connection
62. woofers to horizontal position SONY emblem Setting the clock You cannot set the clock in Power Saving Mode 1 Press I to turn on the system 2 Press TIMER MENU If PLAY SET appears in the display panel press repeatedly to select CLOCK SET then press 3 Press repeatedly to set the hour then press 4 Press repeatedly to set the minutes then press Changing the display mode The demonstration appears in the display panel once you plug the power cord into a wall socket Press DISPLAY repeatedly while the system is turned off Demonstration The display changes and the indicator flashes even when the system is turned off No display Power Saving Mode The display is turned off to conserve power The timer and clock continue to work internally Clock The clock display automatically turns to Power Saving Mode after a few seconds peels uyog 15 Disc USB Playback Playing a disc 1 Press CD 2 Press amp OPEN CLOSE on the unit 3 Load a disc with the label side facing up on the disc tray When you play back an 8 cm disc such as a CD single place it on the inner circle of the tray 4 Press amp OPEN CLOSE on the unit to close the disc tray Do not forcibly push the disc tray to close it as this may cause a malfunction 5 Press B to start playback Before using a USB device with this system Check

LBT-GPX555 / MHC-GPX888/GPX555

Contents

Download Pdf Manuals

Related Search

Related Contents