User Manual Operating Instruction ~ Dental Lab Work Station ~
Contents
1. Accessory list M45 45k RPM micro motor x1 User Manual i Filter 1 Metal Operating Instruction a sr Filter 3 HEPA Optional g Sand Blast Pan h Media Container i Wool Cotton Container Dental Lab Work Station Control Panel amp Switches l Micro Motor Connector Micro Motor Reset Button Suction Power Adjust Micro Motor Spin Speed Adjust Micro Motor Start amp Spin Direction Selector Working Chamber High Low Adjust Main Power On Off 7 l l I l l I l l I l l l l l l l Power Reset Button Operating Instruction 1 Control Panel 1 Connect the power and make sure suitable voltage 110V or 230V is been select Ty ac 10v oore cone tas cedp esa EN TEL 886 2 22020779 2 Switch on the main power to turn on the light and all other functions A Hand Piece u Piece Ag pertan 3 Push up or down to adjust working chamber to level the A position A Fiese gt qu en Piece u 4 Push up or down to select and start the micro motor spin direction CW or CCW A Hand Piece Suction Hand Piece VRx10000 KATTER OFF Down VF e 5 Turn the knob to adjust the micro motor spin Es left for slower and right for faster A nn erg ee BR Piece un e 6 Turn the knob to TE the suction power left for lower and right for higher A en gt Suction Hand Piece VR Reset Ka 2 Micro Mot2. core into tube Push the core and tube back gently till stop and screw back the front tip Take out the metal filter that contains larger debris Unscrew these 2 screws to open the cover EE Turn CW to take down the dust bag and CCW to secure Cover the box and fasten 2 Screws Please contact your local dealer if you encounter and issue that are unable to clear
3. or 1 To connect the micro motor to controller plug into the connector at the right hand side of the control ie A Hand Piece gt sr Piece se eo m Make sure the dent on the plug is oriented to plug into connector 2 lo change the spin direction make sure the switch is set in the middle and wait till the motor than to select next direction A Hand Piece gt q ji Piece Reg eo 3 To change the tool a Hold the handle section b Turn this section CW to release and CCW to secure the tool c When done make sure both front and back end cover and secured 4 If micro motor stopped Gide ng sa the spin direction switch to the middle than press the red reset button next to the connector A Hand Piece gt q jr wir Piece Ren eo 3 Magnifier 2 Containers 1 The magnifier is build with magnet therefore a The empty battle is for holding the sand up can be attach anywhere on the machine to 100um Leave empty the system can be use a blower b Insert cotton or wool for filtering the moisture from compressor Optional 4 Sand Blast 1 Press the button to start and release to stop the air compressor 3 To clear oversize bead a Unscrew to release the front tip Gs gt d KE Hold the push the clear tube to push out the tungsten core Take off the tungsten core from the clear tube and clear the oversize bead When cleared insert the
Download Pdf Manuals
Related Search