Pro-Ject Dock Box S Fi
Contents
1. BY PRO JECT AUDIO SYSTEMS INSTRUCTIONS FOR USE Pro Ject Dock Box S Fi Dear music lover thank you for purchasing a PRO JECT AUDIO docking station Dock Box In order to achieve maximum performance and reliability you should study these instructions for use carefully V Warning of a hazard for the user the unit or possible misuse nes Important notice Connectors Left Right 18V CE rons Out Audio Systems Vienna Austria Make all connections whilst the Dock Box is disconnected from the power supply Take care to connect the left and right channels correctly The right channel is usually marked red the left channel black or white Never use any other power supply than the one supplied with the unit Connection to the amplifier Connect the Left Right Out socket to a line input such as AUX on your amplifier Connecting to a computer iPod operating system Connect the USB output of the Dock Box to a free USB socket on your computer and switch it on 5 When the Dock Box is connected to a computer all functions of the Dock Box are blocked Connection to a TV set or a beamer Connect the S VIDEO socket to a s video input of your TV set or beamer 5 All digital units do not support the s video output Fitting and adjustment of the iPod cradle Use the knurled screw supplied to fix the cradle to the Dock Box chass2. Press any key except ON OFF turn on the iPod Start Pause _ starts and pauses playback Stepping between tracks reverse and forward scanning skips to the previous track skips to the next track restarts the current track in playback mode Press and hold the button for reverse scanning or the button to start forward scanning Repeat play starts repeat play for the current track Pressing the button again starts repeat play for all tracks To deactivate repeat play press REPEAT once more Shuffle play activates and deactivates shuffle play Audio Trade GmbH Pro Ject Dock Box S Fi Revision 2013 1 15 3 Navigating the menu MENU ew shows the menu Returns to the previous step in the menu DO and move the curser up and down to highlight the requested option ENTER selects deselects the highlighted option Shows the next step in the menu Replacing batteries Proceed as follows e Unlock and slide open the battery case cover Replace the battery Make sure the battery is the right way round e Close the battery case cover Battery type 1 x CR2032 3V or 1 x CR2025 3V Do not dispose the batteries as ordinary domestic refuse Please dispose your exhausted batteries at the appropriate collection sites usually located at supermarkets and drugstores Technical specifications Pro Ject Dock Box S Fi Frequency response 20Hz 20kHz Line level o
3. is Do not fully tighten the screw yet Now place your iPod on the Dock Box contacts Move the cradle so that it supports the iPod and tighten the screw This device is suitable for iPods iPhones with 30 pole connector only 5 To connect units with a lightning connector such iPod Nano 7 generation or iPod Touch 5 a lightning adapter lightning connector gt 30 pole connector is needed y Use without the cradle will eventually break the 30 pole connector of the Dock Box and the socket of the iPod Before connecting the iPod any sort of cover has to be removed Mains power connection Connect the low voltage plug from the power supply to the Power 18V socket before connecting the power supply to the mains 2 Audio Trade GmbH Pro Ject Dock 5 Revision 2013 1 15 switch and off charging the battery The Dock Box is turned on and off with the supplied user remote A blue LED on the front panel shows that the unit is switched on When the Dock Box is connected to the mains supply it will charge the docked iPod even in standby Remote control iPod Touch and iPhone must be unlocked and switched to music mode The volume control of the apple device has to be set to max ON OFF Blanked out buttons do carry a function snur To switch on from standby or to standby turns the Dock Box off and the iPod into standby Switches the Dock Box on
4. t the voltage in your area meets the voltage requirements printed on the power supply The power supply is used to disconnect the unit from the mains Make sure that the power supply is easily accessible at all times Never handle the device the power supply while your hands are wet or damp V Avoid letting liquids enter the device or the power supply Never place any item containing liquid such as a flower vase on or near the device Never spill any liquid on the device or the power supply Never place any naked flame sources such as lighted candles on or near the device The product shall not be used in damp or wet locations next to a bathtub sink swimming pool or any other similar conditions Copyright trademarks PRO JECT is a Registered Trademark of H Lichtenegger The information was correct at the time of going to press The manufacturer reserves the right to make This guide was produced by Audio Trade GmbH changes to the technical specification without prior Copyright 2012 All rights reserved notice as deemed necessary to uphold the ongoing process of technical development Windows Windows Vista Windows 7 Windows 8 are trademarks of the Microsoft group of companies iPod and OS are trademarks of Apple Inc registered in the U S and other countries Audio Trade GmbH Pro Ject Dock Box S Fi Revision 2013 1 15 5
5. utput 1 pair RCA phono sockets Output impedance 15 ohms Output voltage 1Vrms USB output 5 pole mini B jack USB cable supplied USB signal digital serial data protocol USB 1 1 Operating systems Windows Windows VISTA Windows 7 Windows 8 Mac OS Video output S video socket Outboard power supply 18V 500mA DC suitable for your country s mains supply Power consumption 300mA DC max Power consumption is not constant It depends on the charging needs of the battery lt 1W in standby Replacement battery remote control 1 x CR2032 or 1 x CR2025 Dimensions W x x D D with sockets 103 x 36 x 104 109 mm height plus height of iPod or iPhone Weight 585g without power supply 4 Audio Trade GmbH Pro Ject Dock 5 Fi Revision 2013 1 15 Service Should you encounter a problem which you are not able to alleviate or identify please contact your dealer for further advice Only when the problem cannot be resolved there should the unit be sent to the responsible distributor in your country Warranty The manufacturer accepts no responsibility for damage caused by not adhering to these instructions 5 for use Modification change to part of the product by unauthorized persons release the manufacturer from any liability over and above the lawful rights of the customer Safety instructions AC outlet voltages vary from country to country Before connecting to the mains make sure tha
Download Pdf Manuals
Related Search