DIVUS VIDEOPHONE
Contents
1. Therefore this ID must be the same with which the real external unit 15 registered at the VoIP server If a quickdial button is enabled for the external unit inside the phonebook the Videophone app will call the Same number as defined for the VoIP ID here when the quickdial button is pressed Display name Name of the external unit The name is shown on a related quickdial button or in the status bar on incoming outgoing calls from to the corresponding external unit Ringtone This setting defines if for incoming calls from the selected external unit the default ringtone will be played or a custom one default means that the default ringtone will be Used for this external unit the default ringtone is configured in the General settings menu If for the external unit a personalized ringtone shall be used you can choose one of the available ringtones from a list Quickdial button If this option is enabled a quickdial button for the selected internal unit will appear on the dialpad screen of the Videophone app on the button the name of the selected contact will be shown Clicking on this quickdial button will immediately start a call to the external unit which belongs to the clicked quickdial button DTMF Here the DTMF tones for accept a call triggering the dooropener triggering the auxiliary relais and hangup a call can be defined These settings are available only if the chosen external unit type is MA2. showing the corresponding value and giving the possibility to change the value The popup window can be closed with OK or the change of the value can be aborted with CANCEL Boolean values are represented by a 1 0 Switch which can be directly accessed Videophone Settings VolP Settings Enter VolP server IP Welcome to DIVUS Videophone External internal units 192 168 0 100 This is the first time you are launching i DIVUS Videophone General settings ncel Before you can use its functionality Cance please set up the connection to the About VolP server and configure your external and internal units By clicking OK you will be redirected to the settings menu For further access SAVE AND RETURN to the settings just click on the DIVUS logo at the bottom of the Videophone Back interface Get back to DIVUS Videophone 1121314151617 4690 es ee EE OK 1 1 1 101 19150160 Ss 4 IK PP I Cs Hint When the configuration menu is accessed the Videophone app is automatically disconnected from the used VoIP server and can therefore not receive any calls until the configuration menu is left and the standard Videophone app user interface shows up again Hint All the changes made in the configuration menu are only saved when you return to the standard Videophone app user interface If the app is terminated with opened configuration menu all
3. which consists of several frequencies and is recognized from standardized switchboards and the telephone network The a b transformer modules to which the Videophone Box 15 connected also use this technology in order to execute an action over the conveyed DTMF signal for example to activate the door opener Usually only short sign combinations mostly even just individual numbers are used on that occasion The a b transformer module of BPT for example opens the door if it receives the number 2 from the client as a DTMF signal during an active communication Network stream essentially it is a data flow that can be accessed through the network In case of the Video phone Box we are speaking about still image collected from the Videophone Box that are called from the Videophone software as data flow and are displayed in the main window of the Videophone software as a video Videophone for iOS user manual 18 GUI Graphical User Interface term for a graphical interface through which the user can command the soft ware Also the Videophone software has an integrated GUI UDP User Datagram Protocol UDP is a simplified network protocol which can be used to remotely control the Videophone software For example it enables you to create your individual GUI which be used instead of the frontend of the Videophone software SIP The Session Initiation Protocol is a global standard used in VoIP communication
4. In general it s used by VolP Servers for managing the call in a VoIP system or for IP IP calls by the devices themselves The SIP Protocol is a UDP telegram based protocol which normally uses Port 5060 for communication Videophone Software 2 0 Videophone Box and OPRNDOOR support the SIP protocol and can so be integrated in SIP based systems OPENDOOR OPENDOOR is the based door communication system from DIVUS The loudspeaker module OD Sip in fact is a SIP phone optimized for door communication in software and hardware The OPENDOOR door station can be power supplied and connected to the network over the same network cable if PoE Power over Ethernet is available Since OPENDOOR is also using the SIP standard it can integrated in SIP systems directly without any conversion modules Videophone for iOS user manual 19 4 3 NOTES 20 Videophone for iOS user manual
5. NUAL CONF otherwise the input fileds will be grayed out and show only the pre defined values which can t be changed An empty value or the value x means that no DTMF tone will be sent in the according situation DTMF Here the tones for accept a call triggering the dooropener triggering the auxiliary relais and hangup a call can be defined These settings are available only if the chosen external unit type is MANUAL otherwise the input fileds will be grayed out and show only the pre defined values which can t be changed An empty value or the WoW value means that no DTMF tone will be sent in the according situation Stream type he stream type to use for receiving the video from the according video source can be defined here Available stream types are Motion Jpeg You have to define the whole path to the motion Jpeg source Videophone for iOS user manual 13 o Generic Jpeg You have to define the whole path to the Jpeg source o Use camera of selected intercom type According to the above chosen type the path to the video source and the stream type are chosen automatically and therefore only the Ip address of the video source must be specified IP address Local Url If the stream type Use camera of selected Intecom type is selected in the previous setting here local ip address of the camera can be specified If stream type Motion Jpeg or Generic Jpeg is sele
6. OL IP address IP address of the installed KNXSERVER KNXSUPERIO KNXCONTROL remote address Full external address to the forwarded KNXSERVER KNXSUPERIO including protocol address and port for example https www external com 8443 Object ID ID of the KNX Object present on KNXSERVER KNXSUPERIO which should be triggered The ID be found in OPTIMA administration inside the search engine when the target KNX Object is listed as search result Duration of door opener signal correlated object will be switched on and then off again after certain time duration for which the object will be switched on can be defined here Attention The option Send KNX signal will work only if a KNXSERVER or KNXSUPERIO 15 available in the installation from which the target KNX output can be triggered 3 1 3 GENERAL SETTINGS Her the generial settings of the Videophone app can be defined and the logging functionality can be accessed The following options are available Keep Display on If this parameter is enabled the Videophone app will keep the display of the used IOS device on and prevent the device from being locked after the defined time Videophone for iOS user manual 15 Default ringtone Here the default ringtone be slected from a list of avallable ringtones selected ringtone will be used for every incoming call coming from a VolP ID which in the pho
7. Software Client as client we define nothing else than a software or a device which is able to register on the VoIP server and afterwards can receive and make calls the Videophone software for example is Such a client Each client is identified by a 3 digit number 101 102 103 and can be reached by calling this number It is even possible to run the VoIP server and the Videophone software as client on the same PC the client will run contemporarily with the server without any problems Videophone Box the Videophone Box is a hardware which converts the analog signals of the video intercom to LAN signals and enters into interaction with the VoIP server Simultaneously the Videophone Box makes available the camera picture of the door station as a network stream which can be accessed at any time by the individual clients through the Videophone Software provided that the video signal is active permanently Videophone software app software for the communication with the intercom system and visualization of the picture of the door camera as well as for the communication of the individual clients among each other a b phone signal internationally standardized signal analogous telephone signal as it is used by customary analogous telephones DTMF signal Dual Tone Multi Frequency is a standardized process to transmit the chosen telephone number to the telephone network Every number character corresponds to a certain tone
8. Videophone for iOS user manual 1 DIVUS VIDEOPHONE Videophone for iOS user manual re f Available on the App Store REVO2 20150717 Videophone for iOS user manual 2 GENERAL INFORMATION DIVUS GmbH Pillhof 51 39057 Eppan BZ Operating instructions manuals and software are protected by copyright All rights are reserved Copying mul tiplication translation and conversion either partially or as a whole is not permitted You are allowed to make a single copy for backup purposes We reserve the right to make changes to the manual without prior notification We assume no responsibility for any errors or omissions that may appear in this document We do not assume liability for the flawlessness and correctness of the programs and data contained on the delivered discs You are always welcome to inform us of errors or make suggestions for improving the program The present agreement also applies to special appendices to the manual This manual can contain terms and descriptions which inproper use by third can harm the copyrights of the author Please read the manual before beginning and keep the manual for later use The manual has been conceived and written for users who are experienced in the use of PCs and automation technology CONVENTIONS KEYS Keys that are to be pressed by the user are given in square brackets e g CTRL or DEL COURIER On screen messages are given in the Courier
9. active video signal If there should be no video source configured or the configured video source not be available a loading screen appears in the video window 2 Status bar Shows information regarding the app status caller call state and much more 3 and Light button customizable buttons which can start actions on the connected intercom or KNXCONTROL system e g door opener light auxiliary relay etc 4 5 6 7 8 9 10 Videophone for iOS user manual 7 Camera button Shows hides the camera signal during active calls if there is no active call all video sources configured as default will be shown spy function Next and Previous Switch to the next or previous video source defined for the same door station or as default by a horizontal swipe gesture made directly on the active video window in the appropriate direction right to left next video source left to right previous video source Volume control DND buttons These buttons allow the audio volume adjustment or to mute unmute the application and to switch to DND mode or back to normal mode When muting is enabled incoming calls are displayed but no sound is heard The muting button mutes loudspeaker and microphone A long press of the mute button enables the DND mode the device won t receive calls in this mode A second long press on the mute button disables the DND mode Accept and Hangup button Are used to accept or reje
10. changes will be lost 3 1 1 Videophone for iOS user manual 11 VOIP SETTINGS The core settings to setup the voip communication are located here Generic Remote 3 1 2 3 1 2 1 VoIP server IP Enter the address of the used VoIP server here VoIP username Enter the username for the registration at the VoIP server here VoIP password Enter the password for the registration at the VoIP server here VoIP port Enter the IP port UDP which the VoIP server uses for SIP communication here Enable re registration A periodically re registration on the VoIP server can be enabled here This can be necessary for certain VoIP servers like for example the AVM Fritzbox In normal use case this setting should be disabled Registration timeout The timeout for the periodically re registration can be specified here This setting is only available if the re registration is enabled Remote conection If enabled the Videophone app can connect also from remote to the VoIP server by using the corresponding remote settings corresponding port forwarding require VoIP server address Here the remote address of the Volp server can be defined Normally it is the external IP of the installation or a dyndns url VoIP port The external port forwarded to the local SIP port of the VoIP server can be defined here the required port forwarding must be defined in the local internet router RTP min port Here the minimum po
11. ct end calls If there is no incoming call pressing the accept button will shoe the dial screen where a free number can be entered to call or a quickdial number can be selected to be called Quickdial buttons Max 10 quick dial buttons can be allocated in this area which will call a number related to the contact name shown upon a button when it is pressed Dial pad Field in which a free number be entered to be called With the OK button the call is started to the entered number with cancel the operation can be aborted and the dial screen 15 closed Logo By clicking the DIVUS Logo the configuration menu appears through which all settings can be configured Videophone for iOS user manual 8 2 3 FUNCTIONALITY 2 3 1 VIDEO DOOR COMMUNICATION Standard function If a door call is processed from an external unit analogue intercom connected to the Videophone Box OPENDOOR or other compatible IP door station the Videophone app will show the corresponding video sources inside the video window with the appropriate swipe gesture on the active video window it s possible to switch between the single video sources defined for the calling external unit At the same time the status bar shows the name and caller ID of the calling external unit The call can then be accepted rejected or just the door opener can be activated If the Key button is pressed without answering the call the Videophone Software automatically performs the follo
12. cted the whole path to the video source must be entered here without leading http Remote IP Remote Url the stream type Use camera of selected Intecom type is selected here the remote address to the camera can be specified the address must including the external port forwarded to the local camera port without leading http for example external com 8088 If stream type Motion Jpeg or Generic Jpeg is selected the whole path to the video source must be entered here by using the external address including the forwarded port without leading http for example external com 8088 jpg image jpq Username The user name for accessing password protected cameras be entered here Password he password for accessing password protected cameras can be entered here Attention The Videophone app doesn t support the SIP video format forwarding of the video stream through the VolP server encoded with a special video codec The assignment of the video sources is done in the phonebook in dependency of the Caller ID Internal unit 1 20 e VoIP ID This is the VoIP ID to which all the settings of the according internal unit inside the phonebook will be applied on incoming calls from the internal unit and outgoing calls to the internal unit Therefore this ID must be the same with which the real internal unit is registered at the VoIP server If a quickdial button is enabled for the i
13. doesn t support SIP video A lot of IP ready external units uses video codecs which normally are forwarded by the VolP server to the called client which then automatically shows the video Stream of the calling external unit premised that the called client device or software supports this behavior The Videophone app doesn t support the SIP video format the video sources are defined in the phonebook and shown in dependency of the VolP ID of the calling client D Attention Continuosly active Wifi is very battery consuming on iOS devices The usage of a docking station in local network can prevent low battery situations 1 4 INSTALLATION The Videophone app for iOS can simply be installed and updated from the Apple app store Pre release beta versions are not avaiable inside the App store but they are distributed to the beta community over TestFlight For beta testing of such pre relase versions iOS 8 and the TestFlight App is required To become a beta tester please contact beta divus eu Videophone for iOS user manual 6 2 Functionality 2 1 USER INTERFACE The following picture shows the user interface of the DIVUS Videophone app Moreover on this page you can find some explanations of the individual areas buttons of the app Start new call using a QuickDial button kitchen concierge or just enter the ID to be called DIVUS VIDEOPHONE CANCEL Kai 1 Video window Shows the
14. ernal units with VoiP ID 901 910 and internal units with VolP ID 101 120 are present in the phonebook and can be adapted to the required needs For better overview the settings here are allocated in tabellaric form where on the left is a label explaining the setting and on the right is an input field or a boolean switch can be found ti change the the according settings for selections a new list will be opened where the whished setting can be selected for example selecting ringtone For each external unit up to two video sources be defined switching between the video sources be done in the Videophone app user interface with a horizontal gesture on the active video window Internal and external units have different settings as follows External unit 1 10 The type of the used external unit can be selected here For example if DIVUS OPENDOOR 15 used as external unit the type to choose would be OPENDOOR The correlated DTMF tones for accept trigger the dooropener trigger the auiliary relais and hangup will be set up automatically If the type MANUAL CONF is chosen the DTMF tones can be defined freely This is required if the used external unit is not present in the list e VoIP ID This is the VoIP ID to which all the settings of the according external unit inside the phonebook will be applied on incoming calls from the external unit and outgoing calls to the external unit
15. font e g C gt COURIER BOLD Keyboard input to be made by the user are given in Courier bold e g C gt DIR u Names of buttons to be pressed menus or other onscreen elements and product names are given within double quotes e g Configuration PICTOGRAMS In this manual the following symbolic are used to indicate particular text blocs Caution A dangerous situation may arise that may cause damage to material Hint Hints and additional notes New New features Videophone for iOS user manual 3 INDEX 1 GENERIC INFORMATION 1 1 INTRODUCTION 1 22 MINIMUM REQUIREMENTS 1 3 LIMITATION 1 4 INSTALLATION 2 FUNCTIONALITY 2 1 USER INTERFACE 2 3 FUNCTIONALITY 2 31 VIDEO DOOR COMMUNICATION 2 3 2 SPY FUNCTION 2 3 3 INTERPHONE 3 CONFIGURATION 3 1 CONFIGURATION MENU 3 1 1 VOIP SETTINGS 3 1 2 EXTERNAL INTERNAL UNITS 3 1 2 1 PHONEBOOK 3 1 2 2 SELECT SPY CAMERA 3 1 2 3 DOOR OPENER SETTINGS 3 1 3 GENERAL SETTINGS 3 1 4 ABOUT 3 2 REMOTE FUNCTIONALITY 4 1 IMPORTANT TERMSE 4 3 NOTES 10 10 11 11 11 14 14 14 15 16 17 19 Videophone for iOS user manual 4 1 Generic information 1 1 INTRODUCTION The app DIVUS VIDEOPHONE completes the DIVUS intercom portfolio and makes video communication possible also on iOS devices The app follows the Windows version of the Videophone Software now available in version 3 0 as well in functional a
16. ified as usual in mails To be able to use this feature a mail account must be configured for the native mail client on iOS devices This option is only available if the logging is enabled Hint Enable the logging function only if the DIVUS support give instrucion to do it for tracking singalled misbehaviour on installation Once the analysis is over please disable the logging functionality 3 1 4 ABOUT Here all information about the Videophone app are shown Name Detailled version Copyright DIVUS homepage Support mail adress and phone number Videophone for iOS user manual 16 3 2 REMOTE FUNCTIONALITY Attention The usage of the remote functionality gives also access to the dooropener from outside when nobody is at home DIVUS does not take any responsibility if the user shall open the door from remote by accident because of hurry or not proper usage To be able to use the remote functionality and so receive calls also outside of the installation the network must set up in right way to give access from outside to the single devices The following steps must be considered Port forwarding of the local SIP port from outside to the local IP address of the used VolP server Port forwarding of the local cameras from outside to the local IP address of each single camera on port 80 this way the Videophone app can show the video also from outside the network Port forwarding of the rtp port
17. ll to the whished Videophone Software client is processed and the called Videophone Software client will popup and ring The same can be achieved through quick dial buttons if the Videophone Software client whished to call is listed inside the phonebook Only if in the VolP server con figuration calls between some Videophone Clients are not allowed different areas apartments etc or if the limit of max imum simultaneous calls is reached on the VolP server interphone calls will fail Videophone for iOS user manual 10 3 Configuration 3 1 CONFIGURATION MENU The configuration menu can be accessed by clicking on the DIVUS logo located at the bottom of the Videophone app user interface The above list allows to navigate into the corresponding sub menus while the back button at the bottom brings you back to the Videophone app user interface and saves the changes done inside the configuration of the app In each sub menu a back button will appear on the upper left for navigation purposes clicking this button will bring you back to the previous configuration page The first time the Videophone app is started a message will appear which leads you automatically into the configuration menu becuase the app can t be used if the core configuration voip server username password are not configured The settings are allocated in list form By clicking on a parameter a popup window will appear which contains an input field
18. nebook the default ringtone was defined or and for every incoming call coming from a unknown VoIP ID not present inside the phonebook Do not disturb mode If enabled the mute button in the Videophone app user interface will show a red mute symbol and all incoming calls are rejected automatically by the Videophone app without This setting can also be enabled disable from within the Videophone app user interface through long click on the mute button Password Protection a password can defined to protect the settings of the Videophone app This can be necessary to prevent the end user t make changes by accident If a password is set the configuration menu can accessed only by entering the right password To disable the password protection the input field for the password which appears in a popup window by clicking on the corresponding option must be confirmed empty Log This option leads to a sub menu where the logging paramters can be accessed o Enable log The logging can be enabled disabled here o Clear log The log file can be cleared here This is recommended whenever a new logging period is started to avoid chaos for the later analysis this option is only avaiable if the logging is enabled Send log By clicking on this option automatically a mail is created containing the settings of the Videophone app and the log file the standard receiver is support divus eu but it can be mod
19. nternal unit inside the phonebook the Videophone app will call the same number as defined for the VoIP ID here when the quickdial button is pressed Display name Name of the internal unit name is shown on a related quickdial button or in the status bar on incoming outgoing calls from to the corresponding internal unit Ringtone This setting defines if for incoming calls from the selected internal unit the default ringtone will be played or a custom one default means that the default ringtone will be Used for this internal unit the default ringtone is configured in the General settings menu If for the external unit a personalized ringtone shall be used you can choose one of the available ringtones from a list Quickdial button If this option is enabled quickdial button for the selected internal unit will appear on the dialpad screen of the Videophone app on the button the name of the selected contact will be shown Clicking on this quickdial button will immediately start call to the internal unit which belongs to the clicked quickdial button Image file For better personlization of incoming outgoing calls from to an internal unit an image file Stored on the used iOS device can be correlated to a VoIP ID here The corresponding image file will Show up inside the video window of the Videophone app user interface on incoming outgoing calls from to the corresponding internal unit Videophone f
20. or iOS user manual 14 3 1 2 2 SELECT SPY CAMERA Here the external unit can be selected from which the defined vide osources should be visible when the camera button is pressed on the Videophone app user interface when there is call ongoing This enables the user to check up to two cameras when there is no call ongoing and so to spy outside 3 1 2 3 DOOR OPENER SETTINGS The dooropener functionality can be defined here for the main dooropener key symbol and the auxiliary door opener light bulb symbol Send The tones defined for the external unit to which a call is ongoing Send KNX signal Indipendent from the external unit to which a call is ongoing the defined KNX Object available on KNXSERVER KNXSUPERIO is triggered whenever the corresponding button is pressed on the Videophone app user interface also if there is no call ongoing Send DTMF The only setting available here is the Default delay for multiple DTMF tones This settingdefines the delay between one and the next DTMF tone if multiple DTMF tones more than one digit are used In some situations can be necessary to use a higher delay than the default value Send KNX signal This functionality can only be used if a KNXSERVER or KNXSUPERIO is available inside the system The Videophone app can then trigger one of the available KNX Objects on KNXSERVER KNXSUPERIO The settings here are the following KNXCONTR
21. rt number of the port range for aduio conversation can be defined RTP max port Here the maximum port number of the rtp port range for aduio conversation can be defined Local WIFI SSID The SSID of the local WIFI can be specified here The local SSID is Used to identify the local network If only 3G or another WIFI is available the Videophone app will switch to remote mode only in the local WIFI the Videophone app will switch to local mode If no SSID is defined here the app will switch to local mode if WIFI is available EXTERNAL INTERNAL UNITS PHONEBOOK The phonebook contains all information about the individual caller The Caller ID also called VoIP ID is the value through which a caller is related to the information stored in the phonebook for one of the contained contacts The Call er ID is mostly a three digit number which identifies a contact Unique in the whole system It is the number which the Videophone app gets on an incoming call from the calling client of course the client must be registered on the VoIP server with the appropriate VoIP ID If a quickdial button is enabled the Caller ID must be identical to the number to dial for calling the client It is possible to navigate through the single defined contacts divided in external and internal units The Videophone app supports 10 external units Videophone for iOS user manual 12 and 20 internal units in the phonebook where ext
22. s in design terms When starting the app for the first time it will show a welcome message with some useful information Before being able to use the app it namely has to be configured and integrated as VoIP member into the existing system Note This manual exclusively shows the configuration of the DIVUS VIDEOPHONE app and does not go deeper into the intercom topic Depending on the system in use you can find more details regarding the whole setup either in the manual of DIVUS VIDEOPHONE or in the ones of KNXCONTROL In order to use the app it is required that a configured and working VoIP server is present in the system and that a user for the app has been configured correctly 1 2 MINIMUM REQUIREMENTS In order to run the Videophone app correctly the following requirements must be met IOS 6 or higher Wifi access to the local network Internet router with port forwarding for supporting 3G mode Compatible VoIP server installed in the local network 1 3 LIMITATION The operating system iOS implies some limitations The app cant be automatically started on startup of the used device only if the app was active before shut down the device the operating system will start it automatically on startup of tne device The app must be active in fore or background to be able to receive calls if the app is closed totally any call can be received on the iOS device Videophone for iOS user manual 5 The app
23. s used for audio communication Normally the range 10 000 20 000 is used for communiction In this case this range must be forwarded in the internet router from outside to the local IP address of the VoIP server If the forwarding of this range is not possible the range can be adapted in the Videophone app settings and the port forwarding can be done accordingly If a KNXSERVER KNXSUPERIO is used for triggering dooropener or light also the access to KNXSERVER KNXSUPERIO must be forwarded Normally this is done over ssl on port 443 Videophone for iOS user manual 17 4 Appendix 4 1 IMPORTANT TERMSE VoIP Voice over IP is an international standard like the name already lets suspect it allows speech communication through the network Initially developed for internet phoning this technology is used also in other areas for example for telephone exchange systems or Videophone systems VolP Server This VoIP server is a software which administers the calls of the individual clients present in the network just like a telephone central the identification of this VoIP server takes place through the IP address of the hardware on which the VoIP server is running In a network several VoIP servers can coexist without any problems It is only important that all clients and each software that should communicate among each other are using the same VoIP server On Windows XP OS a small VoIP server can be installed together with the Video phone
24. wing sequence Accept Send DTMF tone to activate the door opener Hangup Of course it is also possible to activate the door opener during an open conversation with the guest outside by pressing the Key button Conversely it is also possible to establish a conversation with the door station when one has pressed a ring button outside first enter the call number of the outside door station through the dial pad of the Videophone App byentering the ID which should be called or by pressing one of the quick dial buttons 2 3 2 Standard function there isn t any active call with the Camera button the spy function can be enabled and disabled If the spy function is activated the video window sows all the video sources defined for the external unit selected as doorspy With the appropriate horizontal swipe gesture on the active video window it s possible to switch between the single video sources Videophone for iOS user manual 9 2 3 3 INTERPHONE Standard Function Basically each Videophone Software client is connected to the VolP server like a normal telephone is connected to a telephone central Therefore it s also possible to make calls from one Videophone Software client to an other Videophone Software client When the call number of a Videophone Software client is entered through the dial pad inside the status bar and afterwards the green Accept button is pressed a ca
Download Pdf Manuals
Related Search