User Manual Pen-Style Pocket Thermometer
Contents
1. When the thermometer is turned on the LCD will show 0 0 C or 32 0 F for two seconds Then the actual temperature will display To save battery life the thermometer will automatically turn off after approximately 20 minutes Changing Unit of Measure Change the temperature unit from C to F by pressing the C F button S T ET Hold Function 1 Press the HOLD button once Hold will appear on the display 2 Press the HOLD button three times to exit the hold function Viewing the Min and Max Readings The MIN MAX mode allows the user to view only the lowest MIN or highest MAX reading 1 Press the HOLD button twice and the MAX icon appears on the display The LCD is now displaying the highest temperature reading 2 Press the HOLD button once more and the MIN icon appear on the display The LCD is now displaying the lowest temperature reading 3 Press the HOLD button once more to exit the MIN MAX mode Note While powering on the thermometer each time it restarts recording Minimum and Maximum and the recordings don t stop until the meter is turned off Specificati Full usable range 40 to 482 F 40 to 250 C Temperature NIST certified range 32 to 300 F 0 to 150 C Resolution 0 1 F C Accuracy 1 5 4 F 42 C full scale Display LCD Response time 20 seconds Auto power off Weight Dimensions L x W x H Power Unit shuts off automatically after 202. User Manual Dd DIGI SENSE Pen Style Pocket Thermometer with NIST Traceable Calibration Model 20250 33 CE THE STANDARD IN PRECISION MEASUREMENT Introduction The Digi Sense Pen Style Pocket Thermometer Model 20250 33 offers fast response and laboratory accuracy with 0 1 C 0 1 F resolution over the entire measurement range Advanced features include F C unit selection Min Max Hold and automatic power off The instrument is fully tested and calibrated to NIST traceable standards Careful use of this meter will provide years of reliable service Unpacking Check individual parts against the list of items below If anything is missing or damaged please contact your instrument supplier immediately 1 Pocket thermometer 2 One LR44 1 5V battery installed 3 Protective sleeve 4 User manual 5 NIST traceable calibration report with data Key Features e User selectable C or F units e Min Max Hold function e Automatic power off to conserve battery life e Rubberized protective housing Meter Descripti 1 Protective cover 4 i 2 Temperature probe 3 3 LCD 4 C F button 5 Power ON OFF button al 6 HOLD MAX MIN button Setup and Operation Power Remove the thermometer from its protective sleeve and press the Power ON OFF button to turn thermometer on Taking Measurements 1 For best results insert the stem of the thermometer at least Y inch into the testing area 2
3. minutes to preserve battery life 1 5 oz 42 5 g 814 x 114 x 9 211 x 32 x 19 mm One LR44 1 5V battery Mai Recalibrati Repai Cleaning and Storage Thermometer should be cleaned with a damp cloth and mild detergent when necessary Do not use solvents or abrasives e Store the meter in an area with moderate temperature and humidity Battery Replacement If the battery power falls low open the battery cover Fig 2 and replace the LR44 battery Fig 1 Close the cover securely Fig 1 Fig 2 It is recommended that Digi Sense products are calibrated annually to ensure proper function and accurate measure ments however your quality system or regulatory body may require more frequent calibrations To schedule your recali bration please contact InnoCal an ISO 17025 calibration laboratory accredited by A2LA INNOCAL INNOVATIVE CALIBRATION SOLUTIONS Phone 1 866 INNOCAL 1 866 466 6225 Fax 1 847 327 2993 E mail sales innocalsolutions com Web InnoCalSolutions com For Product and Ordering Information Contact Cole Parmer Del gt elivering Solutions ou rus Proven Precise Personal Toll Free 1 800 323 4340 Toll Free 1 800 358 5525 Phone 1 847 549 7600 Phone 1 847 327 2000 Fax 1 847 247 2929 Fax 1 847 327 2700 ColeParmer com Digi Sense Davis com Digi Sense 1065DGMAN_20250 33 Rev 1 Manual Part No 00100 64
Download Pdf Manuals
Related Search