Home

2.Short Overview of the User Manual

1. Diskette re uruck Abbrechen Es The Microsoft installiert neue Modems oder ndert die Modemeinstellungen F Hetwork lnstallation Start Arbeitsplatz 5 Click on Select Modem Select Null Modem Types the modell RAS Serial Cable between 2 PCs Onlin 13 20 Systemsteuerung Grafik W95INSO03 BMP Systemsteuerung Datel Bearbeiten Ansicht 7 Neues Modem installieren Das folgende Modem wurde ausgew hlt RAS Seral Cable between 2 PCs Wahlen Sie den Anschlu f r das Modem aus COM Anschluk COM 1 L M Anschlu COM L M nschlu LOMZ L M nschlu LOMZ Druckeranschluls LPT 1 Orlin re uruck Abbrechen Es The Microsoft installiert neue Modems oder ndert die Modemeinstellungen 2 Hetwork lnstallation M Start Arbeitsplatz E 1321 In the next dialogue box select the COM port where the Nullmodem Cable is connected to The dialogue box Standortinformationen is displayed Systemsteuerung Grafik W95INS04 BMP User Manual Content Seite 14 von 108 i Pa Systemsteuerung Standortinformationen Machen Sie Angaben zu Ihrem aktuellen Standort die zum Herstellen von Wahlverbindungen erforderlich sind In welchem Land befinden Ste sich Deutschland 49 7 Wie lautet die Kennzahl des aktuellen Ortsbereichs _ Welche Kennzahl ist ggf tur die Amtsleitung erforderlich Wahilvertahren f r den Stan
2. 12 26 Changing the properties of an existing combination lf you want to change the properties of a combination later first mark the combination that should be changed then click on the Properties button in the Administration of combinations menu So you get to the combination property menu where you can make the changes in the previously described fields Apply the changes by clicking the Next button after you have finished your changes If you want to reject your changes please click on the Cancel button 12 27 Deleting an existing combination To delete an existing combination first mark the combination that should be deleted in the Administration of combinations menu then click the Delete button so that the rule is deleted 12 28 Apply the changes in a combination All created events actions and combinations are written in INI files which are stored in the c SCHEDULE directory This directory contains three INI files an Actions ini for the definition of the actions an Alarms ini for the definition of the events and a Rules ini file for the definition of the combinations The creation changing and deletion of actions events or combinations is performed that changes in the appropriate INI files are made The INI files are read by the ICB during the boot and initialisation process and so the changes are applied To apply the changes during the operation of the ICB you must press the Apply button in the Administration of combinations m
3. indows Setup Startdiskette Klicken Sie auf die K ontrollk astchen der Komponenten die hinzugef gt bzw entfernt werden sollen Getullte K stchen kennzeichnen Komponenten die nur zum Teil installiert werden Weitere Informationen erhalten Ste uber Details komponenten SE Multimedia LJ gt Sprachenunterstuteung 0 0 ME O ES The Microsoft Network O OME g Verbindunderd Netzwerk 7 A Zubeh r NS dware Internet Computer und Arbeitsgruppennamen mussen fur die Identifizierung Speicherplatzbedarf des Computers im Netzwerk angegeben werden Verugbarer Speicherg Beschreibung Zubehor fur die Wert Unline Systemen 3 von 4 Komponenten ausgew hlt Details Diskette UF Abbrechen bernehmen Systemsteuerung ftarten Software SH Start E 1338 After the installation of the software components of the DF Network the selection window of the Computer and workgroup name shows up if there has not yet been a group name installed Grafik W95INS08 BMP Ei Hetzwerk Konfiguration Identifikation Zugriffssteuerung Anhand der folgenden Informationen wird Ihr Computer m Netzwerk identifiziert Geben Sie den Computermamen den Namen der Arbeitsgruppe und eine kurze Beschreibung des Computers an Lomputername Computer Arbeitsgruppe Hausnetz PO User Manual Content Seite 17 von 108 BEZEATEIDUNMG MOEN Software Schli
4. Grafik WNTINSO8 BMP MS Arbg Datei Bearbeiten Ansicht 7 a So ty Das DF Netzwerk wird installiert Hetzwe 3 Diskethe A Sushemsteuerurg Intern Erforderliche Dateien User Manual Content Seite 35 von 108 Ps Es werden einige Dateien von der Unbekannt beratigt Abbrechen Legen Ste die Unbekannt in das unten ausgew hlte Pos Laufwerk ein und klicken Ste dann auf OR i Uberspringen 1 Objektle markiert Dateien kopieren von Ds Durchsuchen M Start Arbeitsplatz DFU Netzwerk 09 14 After the dialogue box DFU Network has popped up begin the installation by clicking the Install button i Then you will receive the message that the DFU Network is being installed and that therefore some files are needed Insert your Windows NT CD in the CD ROM drive and enter the drive letter of your CD ROM drive in the text field next to Copy files from select your CD ROM drive from the list of all available drives with the pull down menu Confirm your input by pressing the OK button After the copying process a new dialogue box Add RAS device or RAS Ger t hinzuf gen opens Grafik WNTINSO9 BMP Arbg Er RAS Setup Hetzwe Abbrechen Hilfe Intern Modern installieren 25 Pad installieren 1 Ubjekt e markiert es ee offer User Manual Content Seite 36 von 108 ga start Arbettsplatz DFU Netzwerk 09 15 Choose from the previous
5. J Wie lautet die Kennzahl des aktuellen Ortsbereichs Intern E Welche Kennzahl ist ggf f r die Amtsleitung erforderlich wahlverfahren f r den Standort fe MF Ton C BWW lmpula C hr ftartor CCl A dankar arar A Er oe ngtalliert neue Modems oder ndert die Modemneinstellungen Aktenkotter AStart E Arbeitsplatz Systemsteuerung 09 10 Please enter a 0 next to Kennzahl des aktuellen Ortsbereichs Area Code and confirm this selection by clicking the Next button Grafik WNTINS05 BMP Das Modern ist jetzt konfiguriert Netzwe Wenn Ste die Einstellungen andem mochten doppelklicken Ste in der Systemsteuerung auf das Symbol Modems und wahlen Sie das Modem aus Klicken Sie dann auf Eigenschaften Intern User Manual Content Seite 33 von 108 hr ftartorn CCELA dankar arar come Installert neue Modems oder andert die Modemeinstellungen Aktenkotter A Start E Arbeitsplatz H Systernsteuerung 09 10 You will receive a message that the modem has been configured Click on Finish Grafik WNTINSO6 BMP 1 Eigenschaften von Modems Allgemein eat Die folgenden Modems sind auf diesem Computer ur installiert Intern 4 Hinzuf gen Entfernen Eigenschaften Wi ahiparameter Standart Neuer Standort Wahiparameter definieren wie Modem verbindungen hergestellt werden Wahlparameter Schlieben A Start
6. Therefore follow the next instructions Please double click on the Workstation or Arbeitsplatz symbol on your desktop and in the next frame on the DFU Network symbol Grafik WNTINS16 BMP 3 Diskethe A Mca C TA DFU Netzwerk i Das Telefonbuch ist leer Klicken Ste auf OR um einen Eintrag hinzuzufugen Sushemsteuerurg 1 Objektfe markiert Aktenkoffer Start El Arbeitsplatz 09 31 The dialogue box DFU Network opens and informs you that the telephone book is emoty Confirm this by ypressing the OK button Grafik WNTINS17 BMP a Assistent fur neue Telefonbucheintr ge 3 Diske Uber das DF Netzwerk wird eine Yerbindurg mit Remote Hetzwerken unter Verwendung eines Modems ISON oder anderer WAN Adaptern User Manual Content Seite 41 von 108 ua a 3 hergestellt Mit Hite dieses Assistenten Konnen Intern au 4 Sie einen Telefonbucheintrag erstellen der die fur spstemste eine bestimmte Remote Netzwerkyverbindung erforderlichen Einstellungen speichert Name des neuen Telefonbucheintrag EB e Keine weiteren Informationen erforderlich 1 bjektfe n Aktenkoffer Abbrechen A Start E Arbeitsplatz 09 32 The dialogue box assistant for new telephone book entries Assistent fur neue Telefonbucheintrage opens Please enter a name for the entry in your telephone book into the line by name of the new telephone book entry Name des neuen Tel
7. Yerbindung mt ICE herstellen EES Geben Ste einen Benutzernamen und ein Kennwort mit zugriff auf die Remote Metzwerkdoma ane an Systemsteuerung Benutzername PO Kennwort Domane Kennwort speichern Abbrechen 1 Objektfe markiert Aktenkotter H Start Arbeitsplatz a DFU Netzwerk 09 41 Now click on the Dial button to build up a connection to the ICB In the next dialogue box Connection to ICB you don t need neither a user name nor a password Simply confirm this dialogue box by pressing the OK button Grafik WNTINS25 BMP atei Bearbeiten Ansicht 7 User Manual Content Seite 46 von 108 Systemsteuerung 1 Objekte markiert Aktenkotter A Start E Arbeitsplatz 84 DF Netzwerk m 09 42 The next dialogue box Connecting to ICB informs you about the state of the connections Grafik WNTINS26 BMP 15 x Die Verbindung zum Remote Sener wurde 34 Diskette A r erfolgreich hergestellt Sie konnen die ublichen Windows MT Frogramme und Tools jetzt verwenden als w ren Sie direkt mit dem Netzwerk x verbunden Intern 3 Klicken Sie mit der rechten Maustaste auf den Snztermsteuerang DFU Netzwerkmonitor in der Task Leiste um die Yerbindung zu unterbrechen oder deren Status zu berpr fen Die Option Bein Wahlen schlie en blendet das Telefonbuch wahrend des WW ahlvorgangs aus und amp chlielt es sobald die Verbindung hergestellt WAJE I Diese Meldung nicht m
8. Dienste Konfigurieren Uruick weiter gt Abbrechen 7 The Microsoft Hetwork Installaton A Start DF Metzwerk 13 45 Enter a name for example ICB for the DFU connection and choose under Modem the RAS Serial Cable between 2 PCs Grafik W95INS16 BMP E oe 7 Ma oo ge Arbeitsplatz Yetzwerk Sustem M5 D05 F inasbe Eigenschaften fur HAS Seral Cable between 2 PCs Allgemein Einstellungen Optionen Internet Es RAS Seral Cable between PCs Imputer ein Anschlu leere aA User Manual Content Seite 22 von 108 ih Fosteingang Online Dienste Maxmale Geschwindigkeit S600 a r Abbrechen Hi The Microsoft Network Installation Abbrechen Start DF Metzwerk 1345 Click Configuration and choose the max Baud rate from 9600 to 115k Baud Allthe values between are possible Note Basically all the serial interfaces are are set to 9600 Baud Grafik W95INS18 BMP ajai MS a FPE BO Arbeitsplatz Netzwerk System MS DOS Eingabe lOlx El IH Neue Verbindung erstellen Internet ERS Geben Sie die Rufnummer far den Computer ein mit dem eine Verbindung hergestellt werden soll Urtskennzahl Rufnummer a Landesk ennzahl Deutschland 49 Online Dienste Uruick weiter gt Abbrechen 7 The Microsoft Hetwork Installaton A Start DF Metzwerk 147 Click on further and enter 0 as Di
9. E Arbeitsplatz Systemsteuerung 09 11 The dialogue box Properties for modems Eigenschaften f r Modems opens where the DFU Network with a serial cable between 2 PCs is listed The installation of the modem is finished Leave this dialogue box by clicking the Close button 8 2 Installation of the Software components for a DF Network connection User Manual Content Seite 34 von 108 After the installation of the Null Modems a DF connection to the ICB must be configured Therefore double click on the Workstation or Arbeitsplatz symbol on your desktop and in the opened frame on the symbol DFU Network Grafik WNTINSO7 BMP atei Bearbeiten Ansicht 7 J Sy Netawe J 38 Dizkette A Das DFU Netzwerk verbindet Sie zum Beispiel Uber ein Modem oder einen ISDHN Adapter mit Remote Netzwerken Sobald die Yerbindung Inter hergestellt ist k nnen Ihre Netzwerkanwen Systemsteuerung dungen ausgef hrt werden als waren Ste direkt mit dem Hemote Netzwerk verbunden Das DF Netzwerk unterst tzt PPP und SLIP Protokolle von Windows NT Das DFU Netzwerk ist zur Zeit nicht installiert Klicken Ste auf Installleren um es zu installieren und zu Konfigurieren i Abbrechen 1 Objektfe markiert A Aktenkoffer H Start Arbeitsplatz DF Netzwerk 09 13 Therefore double click on the Workstation or Arbeitsplatz symbol on your desktop and in the opened frame on the symbol DFU Network
10. Js Standard 1200 bps Modern ceen Standard 400 bps Modem Intern Acer Standard 9600 bps Modern Allein Aranda AAA hae dere Pin Diskette Zurich weiter gt Abbrechen shrift arkan CCELA dankar arar come Installert neue Modems oder andert die Modemeinstellungen Aktenkoffer M Start E Arbeitsplatz sa Systemsteuerung 13 05 Select DFU Network with a serial cable between 2 PCs from the manufacturer Standard modem types and confirm your choice by clicking the Next button Grafik WNTINSO3 BMP Das folgende Modem wurde ausgew hlt OFU N etzwerk mit seriellen Kabel zwischen 2 PCs An welchen Anschlussen mochten Sie es installieren C Alle Anschl sse Ausgew hlte nschlusse C M Zur ck weiter gt Abbrechen hr ftartor CCELA dankar arar ar ae Installiert neue Modems oder andert die Modemeinstellungen User Manual Content Seite 32 von 108 Aktenkotter A Start E Arbeitsplatz a Systemsteuerung 03 05 In the next dialogue box please select the appropriate COM port of your PC where the ICB is connected to Then click on the Next button The dialogue box Location information Position information Standortinformation opens Grafik WNTINSO4 BMP Machen Sie Angaben zu Ihrem aktuellen Standort die zum Herstellen von W hlwerbindungen erforderlich sind Hetzwe In welchem Land befinden Sie sich Deutschland X
11. Manual Content Seite 63 von 108 Eigenschaften von NNTP TCP Port ig Wurzelverzeichnis c newss Timeout iso mre max Benutzer 1 Grafik Servic09 bmp Abbruch _ bernehmen The used TCP port number is specified in the TCP port field The default value is 119 which equals the value for the standard NNTP port The Root directory field specifies the basic directory for the news files from which the news files are transmitted Basically the root path is set to c news which refers to the standard news directory The Timeout field specifies the wait time which determines how long the connection to the news server is hold while no data transfer is in progress This wait time is basically set to 180 which equals a wait time of 180 seconds The Max user field specifies the number of maximal users that can access the News server at the same time The number of maximal users is basically set to 1 user If you have made the changes to one of the described entry fields and if you want to accept these changes please click on the Apply button If you want to dismiss the changes click on the Cancel button 10 11 Properties of the Telnet service Telnet is a program with which you can log into another station via the TCP IP protocol over the internet and remote control it like you can do with a modem or a serial cable and a common terminal program But therefore you need the necessary authority in form of an account on the distant station f yo
12. Now if someone wants to access this server he can use the host name and the domain name in order to access this server like for example webmachine compu shack de The DNS is the top level domain de and first of all converts the name of the domain compu shack into an IP address The DNS of the domain compu shack de converts itself the hostname into an IP address lf you want to configure the ICB for the implementation in a domain you can do this in the Network menu which can be accessed by clicking the Network symbol or the Network text link in the menu bar Eigenschaften des Netzwerks Hostname webEngine Domain esintern de prim rer DNS 175 12 26 23 sekund rer DNS o Grafik Network1 bmp BE In the Network properties menu you can specify the hostname for the ICB a domain name and the IP address of a Primary and a Secondary DNS server Basically the information about the hostname and the domain name is only necessary if the ICB is integrated in an Intranet If the connection to the internet of the ICB is realised with an Internet Service Provider it might be possible that you must specify the IP addresses of the DNS servers if these aren t announced automatically by the dial up process of your internet provider For detailed information about this problem contact your Internet Service Provider lf necessary enter a hostname for your ICB into the text field Hostname that can be maximal 255 characters long In the Domain fie
13. Power supply Case 1 Power supply Case 2 Standard Plug In Power Supply Mainy Plug In Power Supply hd CoM 2 COM 4 COM 3 Com 2 gt ER Ro AE VER AB Chl l LPT 7 COW 4 lt ER lt Standard Plug In Power Supply Mainy Power Sup Primary 230V Primary 230V Secundary 9V 12V DC 500mA Secundary 9V DC Conrad Orderno 518034 Conrad Orderno 5 installation of the ICB ICB The ICB is installed with the base WebServer software For the configuration and local administration the ICB can be installed via a Nullmodem Cable Therefore the Nullmodem Cable connects the ICB with your PC or Laptop Note The cable supplied with a C Control BASIC unit meets the requirements The basic installation of the ICB should be made in following the next four steps 1 Plug In Power Supply 2 Nullmodem Cable between ICB COM 2 and the PC User Manual Content Seite 9 von 108 3 Modem connected to the ICB on COM 1 4 Application e g weatherstation connected to the ICB on COM 4 Internet Connector Box Nullmod as example ae mere _ mae Wind der coma com Cable DOM 3 d a DA ee lt lt LPT 1 CoM i The Nullmodem Cable has following pinning Following pins of the DSUB connectors must be connected DSUB 9 female DSUB 9 female DCD RxD DSR D TxD RTS RI DTR CTs C GNDI sie RI E RI o D1 D2 1 with 4 2 with 3 3 with 2 4 with 1 5 with 5 6 is not connected 6 7 with 8 8 with 7 9 with
14. Seite 71 von 108 lf you want to make changes to the poll cycles just change the value in the Poll cycle field and confirm the changes by clicking the Apply button If you want to dismiss the changes click on the Cancel button 10 24 Delete C Control units To delete a C Control unit that is no longer needed mark the correct C Control unit in the C Control menu in the C Control unit list and then click the Delete button 10 25 Event display Certain system specific events on the ICB can be recorded in Log files in order to use this protocols later for a system analysis The events that can be recorded in protocols are separated in four classes the network the service the kernel and the user class which are described below Class Description Network Shows all started devices or services and their parameters which are use ICB like for example the PPP Service Shows which services have been started and with which parameters eac Kernel Shows system specific events like the start up of the ICB or if an event h file reached the maximal defined line number User Here all user specific events are displayed The display of events and the configuration of the amount of the last recorded events can be made in the Log file menu For every protocolled event a Log file is created in the c news directory that can be sent via FTP or published in a newsgroup The Log file menu can be accessed by clicking the Log file symbol or the Log file text
15. Status Benutzername und Abbrechen Kennwort werden uberpruft Papierkorb amp 1 Objet User Manual Content Seite 27 von 108 amp Fosteingang Online Dienste 7 The Microsoft Hetwork Installaton MStart G DF Netzwerk Verbinden mit ECB 14 02 The next dialogue box informs you about the state of the connection to the ICB User name admin Password admin Grafik W95INS26 BMP ajai MS a FPE BO Arbeitsplatz Netzwerk System MS DOS Eingabe Internet Explorer Datei Ber Werbiewd ne bel Benutzeranmeldung Geben Sie Ihr Kennwort f r die Yerbindung ein Papierkorb Benutzername PO Abbrechen i Kennwort Fosteingang Online Dienste 7 The Microsoft Hetwork Installaton SH Start 23 DFU Netzwerk Verbinden mit ICE Benutzeranmeldung 03 48 After the connection has succesfully built up the dialogue box Connection established opens Grafik W95INS28 BMP User Manual Content Seite 28 von 108 3 WEBMachine Microsoft Internet Explorer File Edit View Go Favorites Help ee Fa Back Bamsan Stop Refresh Home Search Favortes History Channels Fullscreen all Address E http 7 195 1 1 1 index htm ETC ea Er hn System Hutschiene ca Administration Internet Connector Box ICE v1 03 System Info Datum 14 7 1393 65535 0534 Hutschiene in Betrieb set amp m 16s Wetterstation Speicherplatz 1024 EB frei 604 EB Ad
16. does not take over any responsibility for consequential damage on User Manual Content Seite 5 von 108 real value or person which is caused by using the Internet Connector Box 1 2 Service For your consultation Conrad Electronic provides a competent team of service employees Each inquiry will be processed as soon as possible Special questions will be answered from our development engineers of the Internet Connector Box To avoid unnecessary delays please consult the instruction manual the online help of the software the text files and examples and also the possibilities of the information sheets available via the internet before posting any inquiry There you will find solutions for most of your problems Please send your information request to the department of Technical customer Service Letter Conrad Electronic GmbH Abt Technische Kundenbetreuung TKB Klaus Conrad Stra e 1 92240 Hirschau Phone 0180 5831 21 16 Fax 0180 531 21 19 Internet http www conrad de http www c control de 2 Short Overview of the User Manual The chapter Short Overview should declare the use of the ICB Chapter 1 and chapter 3 to 8 contain the Installation Manual which is supplemented as a paper manual in the packing of the ICB The complete User Manual is written as a HTML File on a CD The HTML file can be viewed with a Browser The content of the User Manual contains 16 chapters 1 Introduction 2 Short Overview of the User
17. eee Dain 14 7 1999 65535 0 534 Hutschiene in Betieb set 8m 16 re Speicherplatz 1024 Ba ose enter your authentication information Ge Platten Gr e 1 20 El Resource Administration g Compu Shack mbH Benutzername und Pi a bei Newnstallation User name admin Benutzername admin Password Fahwort adm n IY Save this password in your password list FT ns SE ae ee Mstar fe te WEBMachine Micro Now you get to the administration area To get the status of the DFU connection click on the DFU symbol aside the watch in the task toolbar and the DFU monitor is shown Here you can also disconnect the established connection User Manual Content Seite 49 von 108 Here is the the menu shown in the Netscape Communicator FE Web Audit brabion UE Wehkl achine i e Daa Beabeten drski Gehe Communicate Hile L Lesezeichen JE A hip T SE dire detsat hir LN Fi eae rag it 2 oot ie e Sh vil Gab Bin Dani Di Bee Gans Eat adam Bialug Kanal Essen Kuba Introductian hate A Tine mints Devices Disks He tenrk Leroi ces Ports Hadens Gontroller Event Log Action Hanager Alarn Manager Rules Hanager a Dokumant isana 9 Configuration of the ICB In this chapter we want to describe the system configuration of the ICB so that you can make the basic configuration of the ICB This consists of setting up date and time administration of access rights configuration of
18. in bits per second is displayed with which the ICB communicates with the distant station In the Connected since field the time is shown since the connection to the distant system got activated The IP address Gateway and IP netmask fields show the IP address the standard gateway and the IP subnet mask These three address specifications are necessary for the addressation on the IP Internet Protocol level The IP addresses consist of four numbers which are separated by points which can have any value from 1 to 255 The so called subnet mask belongs to the IP address and separates the IP address in the area for the adressation of the network or subnet and in the area for the addressation of the station in the network or subnet This type of addressation can be compared to mail addresses which are defined by the street name network or subnet address and a house number station address Additionally the so called gateway address is displayed which shows the IP address of the gateway over which the data can be sent to other networks or subnet via TCP IP In the counter area of the device properties menu the transmission statistics of the connection are displayed The Bytes sent field gives the amount of bytes that have been transmitted to the distant station Under Bytes received you can see the amount of bytes that have been received by the ICB If you want to update the display of the counter Statistics just click on the Update button To leave th
19. in the other case accepts the connection if the modem is called from external PGP Pretty Good Privacy PoP Point of Presence dial up center into the Internet Normally an Internet Service Provider ISP POP3 Post Office Protocol Standard Protocol for receiving eMails Provider A supplier of Internet services Proxy Puffer station for the download of data from the internet like for example web sites The proxy saves the downloaded data so that it won t be reloaded in case of another access on the site Enterprises often use proxies also as a firewall to gain better control of the data stream into and from the intranet and to protect themselves from access that has no authority for access RFC Request for Comment Text documents which sum up propositions or already passed internet standards and which are freely available RPM Request Processing Module Server General expression for a computer which offers his services to other computer like for example the FTP User Manual Content Seite 107 von 108 Service Provider A service supplier which offers an internet access as a service for his clients Site Another expression for a HTML page SMTP Simple Mail Transfer Protocol A standard for sending eMails SSL Secure Socket Layer Tag Command in the HTML language TCP IP Transport Control Protocol Internet Protocol A standardised protocol for the transport of data All types of data is exchanged via the TCP IP protocol over the
20. internet Top Level Domain An overlapping domain for countries which equals with the ISO 3166 Country Codes wie de for Germany it for Italy com for commercial enterprises edu for institutions concerning schools or universities gov for governmental institutions int for international unions mit for military institutions net for Network Provider and org for organisations clubs etc Upload Copying files from a client to a server URL Uniform Resource Locator standardised method of displaying Internet addresses The address begins always with the protocol which is used for the data transport like for example http www mmc ag com or ftp ftp compu shack com User Authentication berpr fung von Benutzer Accounts und Zugriffsrechten um bestimmte Bereiche auf einem Server vor nicht erlaubten Zugriffen zu schutzen VRML Virtual Reality Markup Language Language for the description of virtual scenes and animations in the internet Web Short form for World Wide Web Webmaster Administrator of a web server and the stored data on the web server World Wide Web or the short form WWW is the multimedia service in the internet which enables all the documents containing graphic sound and video files Measurements lllmm E Internet Connector Box madeby 525mm COM 4 COM3 COM 2 u B oo OO IM LPT 1 COMI User Manual Content Seite 108 von 108 front view back view Impressum This installation manual is a p
21. link in the menu bar In the Log file menu you get a list of the four event classes and have the possibilities to delete the content of the Log files class dependant display each single Log file in a class and to change the maximal number of the last recorded Log files Losdateien Anzeigen services kernel Loschen Ad l Abbruch Grafik Log01 bmp To view class dependant Log files mark the chosen class in the Log file menu and click the Display button So you get a class menu below the Log file menu in which a list of all previously recorded class dependant Log files is contained User Manual Content Seite 72 von 108 network Wed 14 Jul 1999 03 08 46 GMT Network Start ASYNC Wed 14 Jul 1999 03 08 46 GMT Network Start ASYNC Wed 14 Jul 1999 03 08 47 GMT Network Start ASYNC Wed 14 Jul 1999 03 08 47 GMT Network Start ASYNC Wed 14 Jul 1999 03 08 55 GMT Network Start PPP Anzeigen Abbruch Grafik Log02 bmp Eu In the list of the class menu each class a short description of the event and a time information as date and time is listed To view the content of a Log file mark the appropriate Log file and click the Display button Eventlog From Network Date Wed 14 Jul 1999 03 05 47 GMT Severity Information Subject Start ASYNC Newsgroups Network Lines 6 Message ID lt O0000121 NetworkiNetwork Start ASYL device COMN4 Ika 15 peed 9600 Receivebuffer 2048 Schlie Grafik Log03 bmp c
22. or more files from the ICB to the local PC mkdir Creates a directory on the ICB mput Copies one or more files from the local PC to the ICB open Establishes a connection to the following IP address for example 1 F pu Copies a file from the local PC to the ICB quit Shuts down the FTP connection with the ICB and quits the FTP comi rename Renames files on the ICB status Shows the actual state of the connection to the ICB You will get a detailed list of all FTP commands by entering or help in the FTP command prompt 11 2 Telnet User Manual Content Seite 75 von 108 Windows NT In the menu Connect and sub menu network you can enter the hostname with which you want to make a connection Please enter the IP address of your ICB under hostname which is per default for the first PPP connection the IP address 198 1 1 1 per default Connection type must be set to telnet and the terminal type to vt100 After that press the connect button and the Telnet connection to the ICB will be built up Please enter admin after the request for the username and admin as password too When you have logged in you will be able to execute the appropriate command son the ICB Here we have to say that the access to the ICB via Telnet is available exclusively for support purposes The possible commando list has intentionally not been documented by us and the support of a help command is also not planned If you should get into the situation one day that you
23. possibility to add rights for new directories change or delete the existing rights administration system Grafik Servic05 bmp 10 6 Adding new HTTP rights lf you want to create an area on your ICB where only some users have access rights to create a new subdirectory in the web path which is basically c www using a common FTP client consult chapter about TCP IP service programs Save all HTML files that should only available for the specified user group in this directory The user is later specified as a single user or a user group because for each directory only one username can be specified to have the access right lf you want to give the access for a newly created directory to a user click on the Add button in the HTTP rights menu so that you get to the Create a new user New HTTP User Manual Content Seite 61 von 108 rights menu Anlegen eines Benutzers Pfad Imeu Bereich Beispiel Benutzer Mustermann Pahwort Abbruch Hinzuf gen Grafik Servic06 bmp Tr Please enter the path for which you want to specify the new user rights in the Path field of the new HTTP rights menu The path bases on the web path that is basically set to c www If you have for example created anew subdirectory with the name new you have to enter new into the Path field In the field area you can enter a description of the path Enter the name of the user in the User field and the password for this user in the Password field To finish the ch
24. text link In the Date Time menu you can enter the day of the month in the date text fields select the actual month and enter the year In the time text fields you can set the actual time in the format hh mm ss In the GMT Global Main Time field the time zone can be specified which is 1 in Germany Apply these changes by clicking the Apply button By clicking the Cancel button cancelled After you have configured the time the new changed time appears on the LCD display of the ICB and all future events and actions base on this date and time from the moment when you accepted the changes User Manual Content Seite 52 von 108 Datum Uhrzeit Datum 14 Jul 1999 Uhrzeit foo 55 54 bernehmen a GAMIT j Abbruch Grafik Time001 bmp 9 3 Administration of the access rights The access rights on data of the ICB is administered via user accounts With the user accounts you can give certain users access rights for different data areas on the ICB This includes the rights the access the ICB via telnet the rights for the access via the PPP Point to Point Protocol and the rights for the access on files via FTP Basically you should be very carefully with changing existing user accounts and creating new user accounts because you control the access on the whole data area of the ICB with it If you for example delete all users or if you remove the access rights via telnet PPP and FTP from all users you won t be able to access the data of t
25. that the available memory capacity of your ICB is used to the maximum Reaching the maximal line number the writing process to the Log file is finished and eventually an event is released For the release of an event an alarm must be set by the File event class in the event manager In the Message field the message which is written to the Log file during processing the action is recorded The entry of maximal 255 characters is possible The messages are basically combined with an information about the creation time The messages can consist of pre defined texts with can be combined with variables The variables for the controller query have the systax controller get Control unit name variable name If you have for example connected a weather station to the ICB which has been registered at the ICB with the name Weathercontrol and which offers the variable temp the variable has to be implemented with controller get Weathercontrol temp in the message schreiben in eme Logdatei Verwendung Schreibt eme Nachricht in eine Datei Nachricht Hallo das ist eine Nachricht 00 Dateiname c pubitestht TE Zeilen h chstens Grafik Action03 bmp enics The ICB supports two types of function calling which can either access the system itself or external connected controllers The function calling for the C Control unit is made with controller get and the function calling for the system is made with system get With the appropriate function calling t
26. the serial ports configuration of the modem and the configuration of the dial up connection for connecting to the Internet Service Provider After this chapter you should be able to make all the system specific basic configurations of the ICB We will describe every menu which is necessary for the basic configuration so that you get to know all configuration options of the ICB 9 1 The User Interface The User Interface of the ICB is based on HTML pages so that the ICB can be administered operated and configured with any available web browser The administration is absolutely the same via the internet or via a direct serial connection between a PC and the ICB Exclusively for the first configuration of the ICB a direct serial connection between the PC and the ICB is necessary You can find a detailed description in your manual or in this online documentation in the chapter Direct connection between PC and ICB about how to configure and establish a direct serial connection between your PC and the ICB After having established a connection to the ICB you can start your web browser and enter the IP address of the ICB in the address line of your web browser After that the User Interface of the ICB builds up in your web browser The time necessary for building up the user interface depends on the transmission speed of the connection between User Manual Content Seite 50 von 108 your PC and the ICB The user interface based on HTML page is separated
27. to transmit the file After this time the attempt fails for exeeding the time limit 12 22 Changing of the properties of existing actions lf you want to change the properties of an action afterwards please first select the action that should be changed and then click on the Properties button in the Administration of actions menu Then you will get to the action properties menu where you can make your changes in the previously described fields Apply the changes by clicking the Apply button after having finished the changes If you want to reject your changes please click on the Cancel button 12 23 How to delete an action To delete an action please mark the action that should be removed in the Administration of actions menu and click on the Delete button so that the marked action is deleted 12 24 Combination of events and actions lf you want to combine an event with an action you first have to start the combination manager by clicking the Combination menu link So you get to the Administration of combinations menu where all previously defined combinations are listed up Verwaltung der Verkn pfungen LCD 2 ETE Grafik Rules001 bmp Abbruch In the Administration of combinations menu you have the possibility to change the properties of previously created combinations to delete existing combinations or to create new combinations of events and actions 12 25 Adding a new combination By clicking the Add button in the Administration of co
28. ur E Ger DFU N k mit serelem Kabel zwischen 2 P r E a ge berat DTU Netzwerk mit senellem Kabel zwischen 2 Fl Adresse http 192 Status Verbindung mit ICE hergestellt I Antwort vorm Ger t Nicht verf gbar E Leitung bps 39 400 D auer 00 03 57 Internet Connect F S Geratestatistik Bytes empfangen r093 Bytes gesendet 5218 Introduction Verbindungsstatistik Bytes empf Bites gesendet Datenblocke empf Datenblocke gesendet Komprimierung empf komprimierung gesendet erstem Info Documentation TAT Weather station A dirurustration CALC I Datenblock 0 A oe RE E Oona eeee Gh ioe E ES ea T Geratetehler User Manual Content Seite 48 von 108 EIU SL CAT il Li III III UE Poa Li u Ausnchtang U Fufferuberlauf 0 Zur cksetzen Detalls Auflegen Ei sh Start S WEBMachine Microsoft l DF Monitor F 09 54 The configuration of the ICB or the generation of event depended actions has to be done in the Administration menu Please click on the Administration symbol Enter the user name admin and also the password admin Grafik WNTINS29 BMP 3 WEBMachine Microsoft Internet Explorer File Edit View Go Favorites Help a e n i a A Fullscreen Mail Back Bamsan Stop Refresh Home Search Favortes History Channels Address http 7198 1 1 1 indes htm m gt System Hutschiene can Administration Internet Connector Box CE v1 03
29. with the direct communication connection to the ICB under Windows 95 and alternatively Windows 98 The necessary installation steps under Windows 95 and Windows 98 are basically the same There are different versions of the Windows 95 operating system The first version on the market is the version 4 00 950 Before beginning with the installation the dial up networking Update 1 3 has to be installed which can be found on the Microsoft Homepage under http www microsoft com Please check the version of your Windows 95 system before continuing with the installation The version of your system can be found by opening the system control applet If there the Built Number 4 00 950 and an a or b is displayed no Dial Up Networking Update is necessary 7 1 Installation of the Direct Connection To install the direct connection make the following steps 7 2 Copy the necessary mdmcisc2 inf file To install a connection via nullmodem under Windows9x you have to copy a special Inf file which is supplied on the CD to the directory c windows inf because the existing Inf file of Windows9x doesn t allow a nullmodem installation for the nullmodem connection lf we want to work with a Nullmodem Cable under Windows 95 or Windows 98 this special Inf File mdmcisc2 inf has to be copied in the directory c windows inf 7 3 Installation of the Nullmodem Cable User Manual Content Seite 12 von 108 Click on the desktop symbol START on in the task ba
30. your own correct IP address If the connection to the ICB has been built up you should get a reply The correct reply for the Ping command are three messages like the following Reply from 198 1 1 1 bytes 32 time ms erhalten lf you wish a detailed list of the Ping options just enter ping 12 Creation of event based actions You can not just generate HTML pages with implemented data from external controllers The ICB allows you to generate event based actions The basic concept is the idea of defining actions which are activated by certain events The events relate for example on data which is received from a C Control unit The combination of a ICB a C Control unit and a weather station which is compatible to the C Control unit makes it possible to build up a weather station which can distribute its collected data over the Internet in any form The overriding of a critical temperature value could for example make the ICB send a Log file via FTP to a specified FTP Server so that the receiver is informed about User Manual Content Seite 76 von 108 the temperature overriding and the actual sate of data right in place With the ICB the data which has been collected by the C Control unit can be displayed really easy on HTML pages and linked with actions by the ICB Therefore the C Control unit logs into the ICB during his initialisation process and announces the available variables via the C Control protocol The login and announcement func
31. 0998 supported for the Internet Connector Box For a power brake duration of until 10msec please use external a 4700uF capacitor parallel to the DC power supply The Internet Connector Box must not be used in connection with devices which are directly or indirectly used in medical health or live secure devices or which can cause danger for persons animals or real values The Internet Connector Box must not be used in explosive or chemical aggressive surroundings 3 3 Qutput figures The Internet Connector Box consists of the Internet Connector Box including installation manual in paper form Reference manual HTML File and software utilities on CD ROM e Low voltage power supply connector to connect a DC plug In power supply e Serial interface COM 1 e Serial interface COM 2 User Manual Content Seite 8 von 108 Serial interface COM 3 Serial interface COM 4 Parallel printer interface LPT 1 2x16 character display without backlight A external modem analog ISDN or GSM is necessary The external modem must be connected to one of the 4 serial interfaces of the Internet Connector Box 4 Using 4 1 Power on Please connect the low voltage connector to the connector of the Internet Connector Box Please pay attention to the correct polarisation Device input voltage DC 9V 12V 500mA The normal connection between the Internet Connector Box and the power supply is demonstrated in the following picture
32. 17 How to delete amodem lf you want to delete a newly created modem mark the modem that should be deleted and click the Delete button Pay attention not to delete the existing nullmodem connection because the nullmodem connection is necessary for the connection between a PC and the ICB Wvlodems Null hodem connection ELSA Tango 1000 Entfernen Eigenschaften Abbruch Hayes kompatible Modem Optima 20000 WFC FAx Grafik Modem04 bmp 10 18 Dial up connections The configuration of a dial up connection which is for example necessary for a connection to the internet via an Internet Service Provider can be made in the Dial up Network menu To access the Dial up Network menu where all already existing dial up connections are listed just click on the DFU symbol or the DFU textlink in the menu bar Dial Up Netzwerke Hinzufugen Entfernen Eigenschaften BEE Abbruch Grafik Dialup01 bmp Inthe Dial up menu you have the possibility to create new dial up connections to change the properties of an old existing dial up connection or to delete old existing dial up connections User Manual Content Seite 68 von 108 10 19 Add a new dial up connection To add a new dial up connection click the add button in the Dial up menu So you get to the new Dial up network menu where you can configure the new dial up connection First of all give the new dial up connection a unique name like for example T Online for a dial up connec
33. 5 Restrictions in the C Control protocol 14 6 Program code examples 14 7 Running the C Control unit at the ICB for the first time 15 TECHNICAL DATA 15 1 Hardware 15 2 Software 15 3 Delivery Specification 15 4 Recommended Power Supplies 15 5 Further Recommends 16 GLOSSARY 1 Introduction We thank you for choosing the Internet Connector Box The Internet Connector Box is based on PC Technology chipPC Technology as an Internet Access Box The Internet Connector Box was designed to meet the high expectation of our customers concerning quality and functionality Conrad Electronic GmbH D 92240 Hirschau 1 1 Garantie Each Internet Connector Box has been tested and leaves our production fully functionable Conrad Electronic gives a guarantee on each Internet Connector Box for 12 months In this time possible transport damages during the delivery process production defects or failure in the device will be repaired for free lf the features of the Internet Connector Box should not meet your individual requirements use our 14 days money back guaranty Send back the device in the unmodified original packing during this time to get refunded or for setting of All deadlines are the date of invoice or the date of the sales slip Internal the Internet Connector Box are no parts for service needs through the user The Internet Connector Box must not be opened In case of a broken white seal label all guaranty expires Conrad Electronic
34. 9 The following picture show the pinning at the 9 and 25 pinned female DSUB Connector User Manual Content Seite 10 von 108 RxD DSUB 9 female TxD DSUB 25 female TR The Nullmodem Cable establishes the connection between the PC and the ICB via the TCP IP protocol So the ICB can be configured by using a standard Browser on the PC station After the configuration the Nullmodem Cable can be disconnected and further configurations and updates can be made via the internet using the modem Now the free COM2 connector can be used for a further application 6 Configuration over a Nullmodem Cable 6 1 Generation of a Direct Connection from a PC to the ICB This chapter should show how the first use and first installation of the Internet Connector Box is to be done short form ICB and how to install the PC and ICB so that it is possible to communicate between your PC and the ICB 6 2 Direct connection between your PC and the ICB The configuration and programming of the ICB is realised with a standard PC which can be connected via a Nullmodem Cable to one of the 4 serial ports of the ICB For the communication between the ICB and PC usual protocols like PPP Point to Point Protocol and the TCP IP Transport Control Protocol Internet Protocol are used These protocols are also used by the standard PC which is connected to the internet via a modem The user surface of the ICB is based on HTML so the access with a normal Web Browser can be
35. CB has been changed The path for the templates is specified in the Template path field and basically refers to c www template The HTML page that is shown by an access with a web browser without specified HTML page is defined in the Default HTML field Basically the page index html is specified in the Default HTML field The Timeout field specifies the wait time that defines how long the ICB holds the connection since the last access This wait time is basically set to 180 which equals a wait time of 180 seconds The Max User field specifies the maximal amount of users that can access the HTTP server at the same time The amount of maximal user is basically set to 5 users Next to the possibility of looking at and changing the HTTP server service you also can specify the access rights for each single area of the HTTP server The administration of the access rights bases on the directory structure in form of subdirectories in the basic HTTP directory that is basically set to c www With this rights the user admin for example gets the access rights for the HTML pages which are necessary for the administration of the ICB and which are saved in the c www admin directory Click on the Rights button to get to the menu for administrating the HTTP rights HTTP Rechte Hinzuf gen Entfernen Eigenschaften Abbruch Inthe HTTP rights menu each subdirectory is listed on which access rights have been specified In the HTTP rights menu you have the
36. EINIT string it records that the C Control unit is no longer active For the announcement of the name of the C Control unit and the variables of the C Control unit the following packet format is used during the initialisation process Concerning this packet the beginning consists of a fixed part and in the middle of a variable part where the length depends on the amount of variables and the respective amount of variable attributes defined in it User Manual Content Seite 98 von 108 The packet begin in the data stream is indicated by a amp HAE The target address provides the address to which the packet is sent which normally equals with the address of the ICB that has been announced before during the initialisation process to the C Control unit With the source address the address is specified from which the packet has been sent which equals a uniquely address defined by you in the range from 0x01 until 9x7F in this case The action code defines the type of the packet The initialisation packet is specified by the action code 0x08 for further packet types consult table 5 1 The Device IDs 1 to 3 are reserved for future extensions to the C Control protocol and are currently filled one after another with each one byte of the byte sequence amp H43 amp H43 and amp H45 which equals the content CCE The following string defines the name of the C Control unit Its end is signalised by a carriage return CR and a Line Feed FD The 1 byte lon
37. Eintr t 3 Disk Typ de Namens ServerAdressen die dem Server zugeordnet sind FFF C Namens ServerAdressen angeben Intern Sustenst Netzy wie IFYorpann und Komprimierung verwenden 1 Objektfe Aktenkoffer SH Start E Arbeitsplatz 09 38 Simply right click on the appropriate symbol for the connection and select Eigenschaften or Properties Grafik W95INS22 BMP Iml l m Allgemein Servertypen Skript Typ des DFU Servers PPP Windows 95 Windows NT 3 5 Internet Erweiterte Optionen Internet Explorer li ir les User Manual Content Seite 25 von 108 Am Netzwerk anmelden Papierkork a a pi Sofware Komprimierung aktivieren i Yerschlisseltes Kennwort fordern Posteingang Zulassige Netzwerkprotok alle ee a lf TCP IP TLR IF Einstellungen Online Dienste NetBEUI e The Microsoft Network Installation Abbrechen H Start z DFU Netzwerk 1358 Please uncheck the checkboxes next to Am Netzwerk anmelden Network login Softwarekomprimierung Software compression NetBEUI and IPX SPX compatible protocol in the Servertypen or Server types dialogue window Grafik W95INS23 BMP Arbeitsplatz TEF F Einstellungen I I bs f om Server zugewiesene IP Adresse C P Adresse festlegen EN Internet Explorer CELI f Yom Server zugewiesene N amensserveradressen ay Fapierkorb i C Namensservera
38. Manual 3 Product Descriptions with the Power Supply 4 Using 5 Installation of the ICB 6 Configuration with Nullmodem Cable 7 Installation under Windows 9x 8 Installation under Windows NT 4 0 9 Configuration of the ICB 10 Looking at the Device Properties 11 TCP IP Service Programs 12 Creation of Event based Actions User Manual Content Seite 6 von 108 13 Creation own HTML pages 14 The C Control Protocol 15 Technical Data 16 Glossary The Short Overview shows you the concept of the ICB and also the state of the delivery The ICB is a complete WebServer which can be placed direct next to the application In the state of delivery the ICB is configured for the Conrad Electronic C Control systems For the first installation the ICB can be connected over a Nullmodem Cable to a standard PC or Laptop Over the Browser the user can work with the ICB 2 1 Update possibilities Over the Hostmode software works with a standard PC and the Nullmodem cable possible updates of program codes and alteration of the operating system of the ICB can be done The first delivery state of the ICB is software Rev 1 08 The update of HTML pages or DLL functions can be done over Internet updates via FTP The Hostmode software and also his User Manual can be accessed over the homepage http www mmc ag com and under the product name Internet Connector Box The C Control Systems of Conrad Electronic are C Control BASIC Unit un
39. OK button After that you get to the administrative part of the ICB where you can make any configuration and create event based actions All configuration possibilities are described in details below A detailed description about how to create event based actions can be found in the chapter Creating event based actions User Manual Content Seite 51 von 108 Grafik Ober02 BMP A web Administration Of WebMachine Microsoft Internet Explorer File Edit View Go Favorites Help Se 9 D A 8 amp 8 E Fa Back Bamana Stop Refresh Home Search Favortes History Channels Fullscreen all e EAEL Datum Uhrzeit Datum Benutzer Verbindung Speicher Netzwerk Dienste Forts Modems F Controller Logd Benutzer Yerbindung Speicher Netzwerk Dienste Schnittstellen Modems DFU Netzwerk Controller Ewent Logs Aktionen Ereiqnisse Yerkn pfungen S Compu Shack GmbH Em Tem E Start eiweb Administration 0 9 2 Configuration of Date and Time Date and Time must be entered after the first operation of the ICB and basically after each cold restart of the ICB again The date and time information is important for the creation of Log files and for the time based control of actions of the ICB Additionally the time is displayed in the front LCD display of the ICB The configuration of date and time is made in the Date Time menu which can accessed by clicking the date symbol or the Date Time
40. User Manual Content Seite 1 von 108 Conrad Electronic GmbH D 92240 Hirschau http www conrad de Internet Connector Box User Manual Rev 2 0 English Translation Cc Internet Connector Box MiniWebServer mails br Conrad Best Nr 120170 Important Read completely Before you use the Internet Connector Box or connect devices to the Internet Connector Box please read the Installation Manual completely It explains the correct use of the Internet Connector Box and shows up possible hazard situations For damages which result of disregarding this Installation Manual the company Conrad Electronic can t make any guarantee or any responsibility crc Jul Conrad Techr olozic Ce nimm Content Important Read completely 1 INTRODUCTION 1 1 Guarantee 1 2 Service 2 SHORT OVERVIEW OF THE USER MANUAL 2 1 Update possibilities User Manual Content Seite 2 von 108 3 PRODUCT DESCRIPTION WITH THE POWER SUPPLY 3 1 Provision use 3 2 Security notice 3 3 Output figures 4 USING 4 1 Power on 5 INSTALLATION OF THE ICB 6 CONFIGURATION OVER A NULLMODEM CABLE 6 1 Generation of a Direct Connection from a PC to the ICB 6 2 Direct connection between your PC and the ICB 6 3 Connection to the ICB 7 INSTALLATION UNDER WINDOWS 9X 7 1 Installation of the Direct Connection 7 2 Copy the necessary Inf File 7 3 Installation of the Nullmodem Cable 7 4 Installation of the Software Components for a DFU Connec
41. al number Grafik W95INS19 BMP User Manual Content Seite 23 von 108 al MS a FPE Bo Arbeitsplatz Netzwerk System MS DOS Eingabe Ioj x BE DT Yerbindung erstellen Internet ERS Eine neue DF Netzwerk Yerbindung mit dem folgenden Namen wurde erstellt ECE Klicken Sie auf Fertigstellen um sie im Ordner DFU Netzwerk zu speichern Doppelklicken Ste zum Herstellen der Verbindung auf das Symbol Wenn Sie die Verbindung sp ter bearbeiten mochten klicken Sie darauf und klicken Sie im Menu Datel auf den Befehl Eigenschaften Online Dienste uruck Fettiastellen Abbrechen The Microsoft Hetwork Installaton H Start DF Metzwerk 1347 Now a message appears New DFU connection installed Click on finish and close this job Grafik W95INS20 BMP a DFU Netzwerk 0 EE Datei Bearbeiten Ansicht Yerbindungen PeR Neue Verbindung erstellen Papierkorb 2 Objekte User Manual Content Seite 24 von 108 The Microsoft Network Installation H Start 29 DFU Netzwerk 1349 Start A new DFU symbol has been created 7 6 Setting up the DFU Network properties There must be made some changes in order to establish a connection to the ICB after the configuration of the DFU Network has been finished Grafik W95INS21 BMP JPPP TCPZIP Einstellungen P Adresse die dem Server zugeordnet ist atei Bearbeiten Ar t IP Adresse angeben Soto a
42. ames but only by this fixed unique number After the transmission of all variables follows the 1 byte long CRC Cyclic Redundancy Check in which you can either let the checksum be calculated or just forget about it If you leave out the calculation of the checksum you have to indicate this by a amp H2A The end of the packet is signalised by the add of the packet end with the content amp HAF CCE _GET REQ Query for a single or all variables CCE_SET REQ Set a variable to a specified value CCE GET RES Response with the queried variable or the queried variables CCE_SET_RES _SET_RES CCE_SET_RES 4 Confirmation for the setting of a variable CCE_INIT 8 initialisation packet CCE FIN 16 Finishes the action CCE ERROR Failure code User Manual Content Seite 99 von 108 Table 5 1 Shows the attributes of the different actions Bit Attribute Description 0000000 1 Byte Variable with a transmission length of 1 Byte 00000010 Integer Variable with a range from 32767 to 32768 and the transmis 0000001 1 Word Variable with a the transmission length of 2 Bytes 00000100 Reserved for a future variable type 00000101 Reserved for a future variable type 00000111 Bit Variable with a the transmission length of 1 Byte 00001000 Variable has a scale amount in a decimal power 00010000 Variable is settable 00100000 Variable is a changeable value 01000000 Variable is non settable 10000000 Value range for the Variable exists Table 5 2 shows the att
43. anges click on the Add button to save the new HTTP rights so that you get back to the HTTP rights menu where the new path is listed To dismiss the entries click on the Cancel button Edit WWW Access Ffad admin Bereich Administration Benutzer Jadmin Palwort Be Abbruch Ubernehmen Grafik Servic07 bmp 10 7 Changing HTTP rights To change the HTTP rights of an existing and path depending access right mark the path that should be changed in the list of the HTTP rights menu and click on the Properties button So you get to the New HTTP rights properties menu that entry fields equal the ones that have been previously described Make your changes in this menu and save the changes by clicking the Apply button If you want to dismiss the changes click on the Cancel button 10 8 How to delete HTTP rights To delete HTTP rights mark the path that should be deleted from the list of HTTP rights and click on the Delete button Note Remember never to delete the HTTP rights for the path admin This rights are necessary to access the administration HTML pages of the ICB with a web browser 10 9 Properties of the FTP server service The access on files or whole file systems like for example display of files or directories reading file contents and copying to or from distant file systems is made via FTP The FTP comes from the TCP IP protocol family and is the short form for File Transfer Protocol and makes it possible to transfer fi
44. available by the already mentioned function calls for the C Control unit controller get or the system system get Enter the text of your choice for the first line of the display in the upper line Line 1 and the text for the second line in the field Line 2 below schreiben auf das LUD Display Verwendung Text auf LED Display ausgeben Zeile 1 IH allo ICB Freund Hele 2 Es ist system qetitime hhmm ssi Abbruch bernehmen Grafik Action09 bmp 12 20 Action class Connect Disconnect to Internet Trough the Connect Disconnect to Internet Class an action can be defined which support the dialup to the Internet A name is to defined for the Connect to Internet Class a DFU network is also to be selected In the Provider field the already selected provider is to be written In this menue you find User Manual Content Seite 86 von 108 all the Provider who are selected under the DFU Network In the filed Action please select with Connect that through the Action a connection to the Internet should be done Through the select of Disconnect an action of disconnect is succeed Yerbindung zum Internet Verwendung Verbindung aufnehmen oder beenden Provider T Online Akt on Connect l Abbruch _lbernehmen Grafik Action10 bmp Please notice when you define the providers in the DF network menu that you should set asensible Timeout value to avoid too long connections to the internet Most
45. between browser and HTTP Server User Manual Content Seite 91 von 108 Browser Client Server R h en ree Opens file content htm e g ee Replaces all macros lt Example http 198 1 1 1 content htm Macro gt by the respective values and sends them back to the browser Displays HTML file u How to read the temperature temp1 of the C Control hutschiene The simplest possibility is to create a HTML file z B temp1 htm This file should contain the following lines lt HIML gt lt HEAD gt lt TITLE gt Temp1 ofHutschiene lt TITLE gt lt HEAD gt lt BODY gt lt controller get hutschiene temp1 gt lt BODY gt lt HTML gt Copy this file to the directory c www on the ICB If you access this site the following happens Browser Client Server Opens the file temp1 htm Sends request to the Replaces macro lt controller get server zB Te hutschiene temp1 gt http 198 1 1 1 content htm with the actual value of the variable temp1 of the C Control unit named hutschiene Shows HTML file lt and sends it back to the browser If you look at the source code of the HTML page in the browser If the C Control unit hutschiene is connected to the ICB the following text should be displayed lt HTML gt lt HEAD gt lt TITLE gt Temp1 of Hutschiene lt TITLE gt lt HEAD gt lt BODY gt 27 5 lt BODY gt lt HTML gt The value 27 5 naturally depends on the temperature that is registrated by
46. d M Unit C Control Station The C Control Systems are the first applications for the ICB Further applications will follow They also can be accessed via homepage http www mmc ag com and under the product name Internet Connector Box A further application will be the connection of a CMOS Camera over the Parallel port of a printer A further application is the control over the Parallel port for single bit sets and single bit inquiries The further application will continously increase and show the possibilities of the wide area of the Embedded Internet Technology EIT Measurements Control Observation 3 Product Description with the Power Supply 3 1 Provision use The Internet Connector Box ICB is configured as a MiniWebServer Over a external serial Modem analog ISDN or GSM the ICB can connect to the Internet A 9 12V DC power supply 500mA is necessary for the ICB User Manual Content Seite 7 von 108 d ntern et Connector Box Lr MA od 2 m ae Re Sam Power supply Using the nternet Connector Box for other purposes is prohibited 3 2 Security notice Please read this chapter carefully 1 The Internet Connector Box is supplied with power from a low voltage power supply Recommend plug in power supplies are 1 1 Plug in power supply NG 500 9 12V DC input 500mA output current Conrad order No 518034 1 2 Mainy 9V DC Input output current 400mA power 3 6W Conrad order No 51
47. d up a connection that registrates with the entered username and password If the attempt was succesful you get a positive confirmation and the connection is closed after a while If the attempt failed you gat an error message which describes the problem If you use the test function the old values are overwritten and the new ones are saved Grafik Dialup02 bmp Eigenschaften des Dialup Netzwerks Netzwerk JRZOnlinme rere es yee c E Telefonnummer Z D26 ss lt sS C CSS trennen nach FT Sekunden Benutzername Test Pa wort ee eee Abbruch bernehmen 10 20 Changing a dial up connection To change the properties of an existing dial up connection please click the Properties button in the Dial up menu so that you get to the Dial up network menu where you can make changes to the fields that have been previously explained Accept the changes by clicking the Apply button If you want to dismiss the changes press the Cancel button User Manual Content Seite 69 von 108 Grafik Dialup03 bmp Eigenschaften des Dialup Netzwerks Netzwerk IRZOnline fone Optima 28800 VFCFAX 3 auf coms Telefonnummer trennen nach I Sekunden Benutzername Test O OS Pabwort c Testen Abbruch bernehmen 10 21 How to delete a dial up connection If you want to delete an existing dial up connection mark the connection that should be deleted and click the Delete button Dial Up Netzwerke T Online ISDN T Online Entfernen E
48. dort MF Ton E Ta Impuls Ib are 2 UT bbrechen System Tastatur The Microsoft Installiert neue Modems oder ndert die Modemeinstellungen Netwark Installation H Start E Arbeitsplatz E Insert a 0 under Area Code and go to next point The dialogue box properties shows up and under Modems the RAS Serial Cabel between 2 PCs is listed The installation of the modem is finished Now leave this dialogue box 14 09 Systemsteuerung 7 4 Installation of the Software Components for a DFU Connection If you have installed already different DFU connections please click on New connection i Now follow point 4 of the DFU connection If there is no DFU connection installed first of all the Software components have to be installed These components are included by all Windows 9x operating systems and can be found on the Windows 9x CD ROM Installation of the Software Components Click on Desktop symbol Software In the dialogue box of the Software properties window go to the registration Windows Setup Grafik W95INS05 BMP User Manual Content Seite 15 von 108 Eigenschaften von Software ki Ed InstallierenDeinstallieren indows Setup Startdiskette Klicken Sie auf die Kontrollk stchen der Komponenten die hinzugef gt bzw entfernt werden sollen Gef llte Kastchen kennzeichnen Komponenten die nur zum Teil installiert werden Weitere Informationen erhalten Ste uber Details Komp
49. dreszen festlegen LETT LETT LETT LETT IFP Header Komprimierung verwenden t Fosteingang Online Dienste The Microsoft Ok Abhrech i Network Installation O K Jase n art 57 U Netzwer gst 1 DF N k Fe Then select the frame TCP IP properties and uncheck the checkboxes next to use IP Header compression and use Standard Gateway in remote network in the TCP IP User Manual Content Seite 26 von 108 properties dialogue box Leave this dialogue window by pressing the OK button Confirm the changes made by pressing the OK button again 7 7 Establishing a connection to the ICB In order to establish a connection to the ICB simply double click on the previously created DFU symbol A Connecting with dialogue box opens Grafik W95INS24 BMP _ ol Datel Bearbeiten Ansicht Arbeitsplatz JE Yerbindungen f Yerbinden mit F 3 ECE og Benutzername Po z 3 perk orb H Kennwort nn Internet Explorer U a i Posteingang nen tot a Standort Standardstandort Wahlparameter Online Dienste Abbrechen 7 The Microsoft Hetwork Installaton SH Start z DFU Netzwerk 4 Verbinden mit 14 01 Don t enter a user name or a password Simply confirm the dialogue box by clicking the Connect button Grafik W95INS25 BMP Fel x Arbeitsplatz Datei Bearbeiten Ansicht Yerbindungen encase Neue Verbindung ELE Verbinden mit ECB ml m
50. e en Abbrechen start amp 1239 Click on OK and enter a computer name and workgroup name Confirm with OK If you are working with Windows 95 the TCP IP protocol is already installed Windows 98 basically includes the TCP IP protocol by default and therefore it is not necessary to install it Systernsteuerung Grafik W95INS09 BMP Netzwerk gt lt K anf quralion Identifikation Zugriffssteuerung Netzwerkkomponententyp ausw hlen E3 Klicken Ste auf die zu installlerende Netzwerkkomponente Hinzufugen Abbrechen Protokolle ermoglichen den Datenaustausch zwischen Computern wel Computer mussen dasselbe Protokoll verwenden um Daten austauschen zu konnen Datei und Druckerfreigabe Beschreibung Onlin The h Metwork OF Abbrechen start 1227 For the installation of TCP IP under Windows 95 please go on window networking on the registrationcard Configuration Click on Add and then you jump to Network component typ Jump to Protocol Click on Add then you get to window Network protocol select There you will find different protocols of different suppliers User Manual Content Seite 18 von 108 Grafik W95INS10 BMP Netzwerk gt lt Konfiguration Identifikation Zugriffssteuerung Netzwerkprotokoll ausw hlen klicken Sie auf das Netzwerk protokoll das installiert werden soll und dann if aut OR Wrenn Sie uber eine In
51. e device properties menu just click User Manual Content Seite 57 von 108 on the Close button 10 1 Looking at the memory properties The ICB has a Flash disk with 2 MB memory capacity For the administration of this memory area a 12 Bit FAT File Allocation Table is used which is separated in 512 bytes big sectors with a cluster size of 8 sectors per cluster and 430 available clusters The Hard Disk menu gives information about the actual memory properties that means the used memory size and the free memory size Therefore click the Disk symbol or the Hard Disk text link in the menu bar to get to the Hard Disk menu where you get all information like Bytes per Sector Sectors per Cluster the Amount of Clusters the free Clusters and the free hard disk space in bytes The information about the memory property is important for being able to calculate the available memory if you want to create own HTML pages or new Log files Click on the Close button in order to close the display of the memory properties Festplatte C Bytes pro Sektor 512 sektoren Cluster amp Anzahl Cluster 430 Freie Cluster As Total 1761280 Bytes Frei 196606 Bytes Fragmentierung 0 6 schliels Grafik Disk001 bmp Schlie en 10 2 Network properties Basically every computer in the internet can or respectively must be addressed with an IP address But there is the problem that this IP addresses can t be remembered easily Therefore aname concept has been develo
52. e programs don t base on machine code but on a special scripting language They run non platform specific if a java interpreter is installed on the system User Manual Content Seite 106 von 108 JavaScript A scripting language defined by Netscape which is interpreted by the web browser JPEG A picture format which has been specified by the Joint Photograph Experts Group and is very popular in the internet The JPEG format in contrast to the GIF format can display images in truecolor A special compression algorithm makes it possible that the files are small too Link A reference on another document or address in a HTML page on the internet It is often marked by color or with an underline by the browser Namenserver Also called Domain Name Server A computer which contains a list with the links between the domain names and the appropriate IP addresses and which is used to dissolve domain names to IP adresses OSAL Operating System Abstraction Layer PAP Password Authentication Protocol Perl Scripting language with which simple programs can be realised very easy Peer to Peer Protocoll short form PPP The PPP is usually used for the data transmission via a telephone line The PPP can also be used to establish a direct connection between two computer via modems and without the internet It is also used for the connection to the local Internet Service Provider The PPP administrates the modem makes the dial for the telephone connection or
53. e the amount of variables and all of the variables and their parameters during the initialisation process So the C Control unit receives via the C Control protocol every attribute of the variable and optionally the value range the unit and the scale amount of the variable The attributes of the variable are type declarations of the variable and also information if the variable has a value range if it is unchangeable is it is write only and if it is scaled The ICB saves all this information in a special INI file the Ctrbase ini On every login attempt of a newly connected C Control unit this INI file is checked and the variables are only queried if it is actually a new C Control unit The clear identification of the C Control unit is performed by a 1 byte long address which is stored in the area between 0 x01 until Ox7F hex In the ICB this address is linked to the name of the C Control unit so that the C Control unit presents himself with his name to the user So all the events are defined over the name of the C Control unit by the user and not with the address of the C Control unit lf the C Control unit has been previously logged into the ICB wit his unique address all the data from the INI file build the base for the future communication between the C Control unit and the ICB Therefore it is important that you do never connect several C Control units with the same addresses to your ICB If you temporarily changed your program in the C Contro
54. ed Taste 1 lt controller if hutschiene fi aktiv inaktiv amp nbsp gt 4 The following example shows how to add a checkbox in a HTML page with which a logical value can be set If necessary a turn of the value is made in the first part and in the second part the display of OFF or ON input type checkbox name led3 lt controller if hutschiene led3 value 0 value 1 gt lt controller if hutschiene led3 Off On gt hutsch hit hutsch1 htt and hutsch2 htt contain more detailed examples to this topic 14 The C Control protocol In this chapter we want to describe how you have to connect the C Control unit to the ICB and how you must extend the program code of the C Control unit in order to enable the communication with the ICB 14 1 Connection of the C Control unit to the ICB For the connection of the C Control unit to the ICB you have to make a connection with one of the four serial connectors of the ICB Therefore you have to connect the signals TX RX and GND of the C Control to a DB9 female connector according to the following pin description Please pay attention to the fact that you have to make two additional bridges on the DB9 female connector signals at the C Control DSUB 9 TX Pin 2 RX RX Pin 3 TX GND Pin 5 GND em OT wn Pin OS SPT TS wath Pn CTS User Manual Content Seite 96 von 108 14 2 C Control BASIC programs For the different C Control systems of the company Conrad Electronic diffe
55. efonbucheintrags Grafik WNTINS18 BMP atei Bearbeiten Ansicht 7 Heuer Telefonbucheintrag Metzwe a Eintrage Server Skript l Sicherheit a Disk Eintragsname a Anmerkung Intern a Rufnummer Andere Sushemst Wahlparameter verwenden Wahlen mit DF Netzwerk mit seriellen Kabel z konfigurieren W Anderen Anschlu versenden 1 Objektfe Abbrechen Aktenkotter SH Start E Arbeitsplatz 09 40 Please choose the DFU Network with serial cable between 2 PCs in the frame Entries Eintr ge under Dial with W hlen mit User Manual Content Seite 42 von 108 Grafik WNTINS19 BMP Heuer Telefonbucheintrag Ei x Eintr ge Server Skript Sicherheit xa JO xi Eintragsname ICE Anmerkung Rufnummer Andere wahlparameter verwenden Wahlen mit pr n etzwerk mit zenellem Kabel z Konfigurieren Modemkonfiguration Ei ES IW Anderen Anschlu verwenden r DFU Netzwerk mit serelem Kabel zwiache Startgeschwindigk eit bps Hardware Merkmale Wf n Ok BE Hardware Elu kontrolle aktivieren Modemfehlerkontrolle aktivieren Fo 1 Objekt markiert Modemkomprimierung aktivieren I Modemlautsprecher ausschalten Abbrechen M Start Arbeitsplatz 09 35 Next please click on Configure or Konfigurieren and set the transmission speed to 9600 Baud in the dialogue box Modem Configuration or Modemkonfiguration and confirm t
56. ehr anzeigen 1 Objekt kerk jektle markier Aktenkotter A Start E Arbeitsplatz 8 DF Netzwerk 09 50 After having built up the connection successfully the dialogue box Connection established shows up lf you want to avoid that this message is shown everytime a connection is established in the future please deactivate the checkbox Don t show me this message again User Manual Content Seite 47 von 108 Grafik WNTINS27 BMP Fj wWEBkachine Microsoft Internet Explorer Datel Bearbeiten Ansicht Explorer Fawonten 7 2 AS Qt a Zuck Vorvearts Abbrech Aktualis Startsete Suchen Favorten Drucken Schriftgr Mail Adresse http 198 1 1 1 ICB Systeminformation Internet Zonnector Box Version Co WebMachine 1 01 SysDescr WebEngine SysUplTime 22 m 40 s SysObjld 1 3 6 1 4 1 349 17 System Info E SysContact Sigi stephan Documentation SysName Wha SysLocation 56564 Neuwied Germany Introduction Weather station A dirurustration Astar Arbeitsplatz IE WEBMachine Micro E3 14 35 Confirm the connection by pressing the OK button Close this window and open your standard web browser and enter http and the IP address 198 1 1 1 in the address line of your standard browser After that the address line looks like this http 198 1 1 1 Grafik WNTINS28 BMP OY ete ie ge DFU Monitor ofa T Datel Bearbeiten Status Usammentassun Einstellungen q g
57. elector event 1 and event 2 one event must be selected All the events that have previously been created in the event manager can be selected here Below each event 1 and event 2 selector there is the option possible and if it is activated the negation of the event selected before is chosen So you can for example define that the new event takes place if event 1 and Not event 2 has happened In the combination field you must select the logical operator of the two selected events Here you have the choice between the logical operators AND OR or XOR AND equals the logical and combination which means that event event 1 and event 2 The operator OR equals the logical or combination which means that event event 1 or event 2 XOR is the anti valence which means event event 1 is not equal to event 2 User Manual Content Seite 80 von 108 Yerkn pfter Ausdruck Verwendung zwei Ereigmsse logisch verkn pften Ereignis Letzter Monat im Jahr Verkn pfung Allei Ereignis 2 Letzter Monatim Jahr Abbruch lbernehmen Grafik Alarm005 bmp SEE 12 8 Event class Timer With the timer class a time dependant event can be defined Therefore you have to set the amount of time in the duration field after which the alarm is released The time definition can be made in seconds minutes hours or days If you enter a value without unit the ICB basically interprets this input as an input in seconds The input in seconds ha
58. elete a user account mark the correct user account in the User menu and press the Delete button You will get a dialogue box if you really want to delete the selected user account or if you want to cancel the deletion Confirm to resume the deletion process by clicking the OK button and cancel it by pressing the Cancel button User Manual Content Seite 55 von 108 Benutzer Hinzuf gen Entfernen Eigenschaften Abbruch Grafik Accou03 bmp 9 7 Changing a password To change a password mark the chosen user account and click on the Password button in the user menu So you get to the user specific Set password menu in which you can enter a new password in the Password field and retype the new password in the Confirm password field By clicking the Apply button you can accept the new password If you want to dismiss the changed password just click on the Cancel button setze Palwort f r unvperm Palwwort ie Pabwort best tigen Tr Grafik Accou04 bmp 10 Looking at the device properties The communication connections to the ICB are realised on the lowest level via PPP Point to Point Protocol Therefore it doesn t matter if it is a local connection between a PC and the ICB via a serial cable or a remote connection to an Internet Service Provider via a modem The ICB allows one PPP connection for each serial interface so that there can be maximal 4 connections at the same time which are each administered by the ICB as an independe
59. enu This leads to a new reading of the INI files and to a re initialisation of the actions events and combinations So in order to apply User Manual Content Seite 90 von 108 the changes during the operation of the ICB you must press the Apply button to activate the changes you have made 13 Creating own HTML pages You can not only define event based actions on the ICB the HTTP server functionality aoffers you also the possibility to save self made HTML pages on the ICB to make them available for the public The ICB with its small amount of remaining memory can not be sensible used as acommon HTTP server where for example all the information about an enterprise is published and has not been constructed for this purpose too The HTTP server functionality of the ICB should be restricted to provide the user interface based on HTML pages and the possibility of publishing self made HTML pages in which variables of a C Control unit are implemented or the setting of variables of the C Control unit are possible 13 1 Gateways Normally a web server provides static HTML files as ASCII text which is stored in directories as information source which can be viewed with a web browser With a gateway you also have the possibility to access dynamic data Therefore the source of the dynamic data is modified by the gateway that the information source looks like a file on the web server from an external point of view The gateway itself is a program or scrip
60. er EP ay m Autostart Online Dienste Dokumente d Ee Zubeh r Frogramme E Einstellungen 5 Adre buch f r windows ae Internet Explorer A Suchen Internet Mail EA Hilfe amp Internet News 7 LE Microsoft NetMeeting Ausfuhren l M5 005 E imgabeauttorderung 3 i erence tedie AJ Windows E xplorer Beenden Ta Seite 20 von 108 Intemet Programme m Multimedia d Systemprogramme d DF Hetzwerk Editor __ HyperTerminal Imaging ee Unline Registrierung tz Paint BA Rechner ay Wahlhilte CA WordPad 1343 Go to START Programme Zubeh r Accessories and click on DF Network Grafik W95INS14 BMP al ME je FE HO Arbeitsplatz MS D05 Eingabe Netzwerk System ee ioj x 9 Microsoft DF Netzwerk Internet Es Mit dem DFU Netzwerk k nnen Sie per Modern die Verbindung zwichen Ihrem Computer und einem zweiten Computer bzw Netzwerk herstellen Papierko Posteingang Online Dienste i wiaikar fh here User Manual Content Seite 21 von 108 Ca 1 e ee Bug LED Bo Ca The Microsoft Hetwork Installaton H Start 29 DF Metzwerk 1244 Astan The Dialogbox Microsoft DFU Network appears click on Further and then appears New connection Grafik W95INS15 BMP Mis m n Arbeitsplatz Netzwerk System MS DOS Eingabe IH Neue Verbindung erstellen Klang We Fosteingang Online
61. er that it is recommended to restart the computer Grafik W95INS12 BMP Eigenschaften von Software ix io Installieren Deinstalieren Windows Setup Startdiskette Klicken Sie auf die K ontrollk astchen der Komponenten die hinzugef gt bzw entfernt werden sollen Getullte B astchen kennzeichnen Komponenten die nur zum Teil installiert werden Weitere Informationen erhalten Ste uber Details Uhrzeit Drucker komponenten SE Multimedia o E Sprachenunterstuteung 0 0 ME LI F The Microsoft Pohu AN AC a Verbindungen DF Netzwerk Setup A Zubeh r i Die Syustemeinstellungen wurden ge ndert ee starten Sie den Computer neu sobald die Software su erplatz all hinzugefugtfentfernt wurde um mit dem OFU Netzwerk oder der Verfugbarer Speicherpl PC Direktverbindung zu arbeiten Beschreibung Zubehor fur die Yerbi Unline Systemen 3 von 4 Komponenten ausgew hlt Details Diskette UF Abbrechen bernehmen sh Start sai Systemsteuerung After having restarted the installation is finished Internet 13 40 7 5 Installing the DFU connection After the installation of the Software Components of the DFU Network the DFU connection to the ICB can be established User Manual Content Grafik W95INS13 BMP Bl aji Loo 7 p Arbeitsplatz Netzwerk MS ge MS D05 Eingabe System na b f Internet Explorer Windowe Explor
62. erformance provided by your ISP Internet Service Provider and th performance of your modem adapter eMail electronic Mail for sending and exchanging electronic messages and information Firewall Special hard and software which protects a network from intruders out of the internet without permission like for example proxies Forms A form on a HTML page with checkboxes drop down lists input text fields and textareas and radio buttons Frames Die division of HTML pages in several single document parts User Manual Content Seite 105 von 108 FTP File Transfer Protocol a standard for data transmission to or from a distant system by the TCP IP protocol Gateway With a gateway you can additionally access dynamic data whereas a normal web server often only offers static HTML files in form of ASCII text GIF Graphics Image Format A very often used format in the internet with a support for 256 colors which operates witha high data compression rate in order to make it possible creating small and fast transmittable documents GUI Graphical User Interface Hits Number of accesses on a web server Homepage A page of a private internet user or an company to present themselves HTML Hypertext Markup Language File format in the internet HTTP Hyper Text Transport Protocol standardised protocol over which a web browser communicates with the web server and the transmission of HTML pages is made possible IDEA Information Data Encryption Alg
63. ernet Explorer File Edit View Go Favorites Help 8 2 ay a a2 8 fF fF Back Bamana Stop Refresh Home Search Fawortes History Channels Fullscreen Mail Address E http 195 1 1 1 index htm crc es Er shmaak System Hutschiene Wetterstation Administration Internet Connector Box ICE v1 03 em into Datum 14 7 1999 a 0 534 Hutschiene in Betrieb seit 6m 16 ae Herrio Speicherplatz 1024 E7 Administration Platten Gr lie 1720 EJ Please enter your authentication information Compu Shack GmbH Benutzern ound F Resource Administration alti d bei Newnstallation User name admin Benutzername admin Password BIT Fahwort adm n Y Save this password in your password list Em Tr TS Mstar fe fe WEBMachine Micro After this you get to the administrative area of the ICB Examples and information about this is in this manual and on the CD under utilities User Manual Content Seite 30 von 108 8 Installation under Windows NT 4 0 If you have running Windows NT as your operating system you must use the so called RAS Dienst or RAS Service in order to establish a direct connection to the ICB Setting up the direct connection under Windows NT has to be done like explained below 8 1 Configuration of the Null Modem Double click on the Arbeitsplatz or Workstation symbol on your desktop and then in the opened frame on the symbol for Systemsteuerung or Syste
64. et server by this action With the option Delete file after transfer you can define whether the local file is deleted after the transmission or not The Port field defines the port number that is used for the FTP The standard port number for the FTP access is 21 In the Retries field you can define how often the transmission procedure is repeated if the file hasn t been transmitted on the first time The Timeout field defines the maximal duration of the FTP transfer before the transfer is broken up because of a overridden time limit User Manual Content Seite 85 von 108 Versenden emer Datei via FTF Verwendung cendet eme Datei zu einem FTP Server Provider T Online Host tp compu shack com 0000000 Username anonymus Pa wort MD Remote Verzeichnis Apublic Remote Datemame Nachricht td M Daten anh ngen Lokaler Dateiname cyoub test tet l Datei nach bertragung l schen Port 21 Yersuche E Timeout fi ao Grafik Action07 bmp 12 18 Action class System command Not yet implemented 12 19 Action class Write to LCD The write to LCD action requires that the text in the first and second line that should be displayed on the LCD display is entered For each line you can define 16 characters which stay on the display after the action has been activated until the display is getting rewritten The first and the second line predefined texts can be combined with variables The variables are
65. fe markiert Aktenkotter H Start Arbeitsplatz DFU Netzwerk 09 18 Select the TCP IP protocol as client protocol by checking the checkbox TCP IP Confirm this choice by pressing the OK button so that you will get back the RAS Setup dialogue box Grafik WNTINS13 BMP User Manual Content Seite 38 von 108 RAS Setup Anschlu erat LOM Hetzwe Abbrechen Netzwerk Intern Hilfe Hinzufugen Entfernen Konfigurieren Duplizieren 1 Objektfe markiert F L Aktenkotter H Start Arbeitsplatz DFU Netzwerk 09 19 Please press the Next button so that the necessary files are copied and the RAS service is configured Grafik WNTINS14 BMP atei Bearbeiten Ansicht 7 Hetzwe m a 4 Diskette eE on DFU Netzwerk ad by Das DF Netzwerk wurde einwandfrei auf Ihrem fa Computer ingtalhert Sushemsteuerurg Intern Die neuen Einstellungen werden erst nach dem Neustart des Computers wirksam Mochten Sie Ihren Computer jetzt neu starten Nicht neu starten 1 Objektfe markiert User Manual Content Seite 39 von 108 Aktenkoffer H Start J Arbeitsplatz DF Netzwerk 09 20 Having finished the installation process of the DF Network you will receive the message to restart your computer Therefore press the Restart button Grafik WNTINS15 BMP Hetzwe 3 Diskette A Mica C ob 2 x See Dienstkontroll H anager E4 Der Start
66. fore all variables that have been announced to the ICB during the initialisation and login process of the C Control unit are available The name of the C Control unit with which he logged into the ICB and the available variables can be viewed in the controller properties menu The definition of the controller event is performed in the three fields the controller field the variable field and the value field In the controller field the C Control unit must be selected for example weather control In the variable field the name of the variable is set for example temp In the expression field the value of the variable and the mathematical operator is entered Possible mathematical operators are lt for smaller gt for greater for equal lt for smaller or equal gt for greater or equal and for not equal Control Yar able berpr fen Verwendung C Control Variable tut vorgegebenen Wert vergleichen U Control fhutschiene T Variable MO Ausdruck Grafik Alarm002 bmp bernehmen 12 5 Event class File Event With the file event class events can defined that are released if the maximum defined size of a Log file is overridden The size refers to the definition of the lines that are allowed to be written in the Log file at maximum The correct Log file must be respectively selected in the Log file actions field Among the Event Log file there are all other defined Log files available that have been created in the action
67. g Amount of variables information the number of variables is given which are announced in the following variable part of the packet from the C Control unit The announcement of the variables always starts with the announcement of the name in form of a string The end of the variable is indicated by a carriage return CR anda Line Feed LF After that follows 1 byte where every bit gives a possible variable attribute to a variable which are defined in the table 5 2 The following string arguments are optional and depend on the type of the variable and its attributes During the transfer the right order must be guaranteed At first place the optional information about the value range in form of a minimum maximum value which is handed over as a string and is also ended with a carriage return CR and a line feed LF The second position gives information about the variable unit which is transferred as a String type and which ends with a carriage return CR and a line feed LF The third position optionally gives the information about the unit of the variable as a string argument which ends with a carriage return CR and a line feed LF At last there is the scale amount of the variable in form of a decimal power in one byte The single variables get numbered from 1 to 127 just in the order they get transmitted in this packet This enumeration is valid for the later query or setting of the single variables which aren t accessed by the ICB by their n
68. g five choices to select the event class in the event class selector Letzter Monat im Jahr Temperatur unter 20 C Alle 30 Sekunden Logfile ber 100 Zeilen Grafik Alarm001 bmp 12 3 Event classes The technical expression Class means kind of event Event classes Description Controller Variable An event that bases on variables from an external controller File Event Events that are released by an overflowing Log file System Variable Events that base on variables which are provided by the ICB Timer Time dependant alarm Internet Event that is released by a successfully opened or closed connection to the internet Combined Event Enables the logical linking between two pre defined events Depending on the chosen event class you get to a different properties menu after having entering the name and confirmed by pressing the Next button in which the properties depending on the event classes can be defined The respective properties menus are build up differently Their functions and input fields are described below Enter the necessary values in the respective fields which are described below and save the new event by clicking the Apply button lf you want to abandon the new event please press the Cancel button 12 4 Event class Controller Variable User Manual Content Seite 78 von 108 By selecting the control class you can define events which depend on variables which are sent by an external controller There
69. g form should be displayed in your browser window User Manual Content Seite 93 von 108 Relais __Wertsetzen Server sends the request to The user fills out the form z B with a 1 and sets the user dll The CGI program value by pressing the button Wert setzen So the tries to set the variable rel1 following request is sent to the server of the C Control unit http 198 1 1 1 user dll hutschien to the value 1 commandscontroller amp hutschiene reli 1 amp cmd_set Wert Setzen By adding the following lines a context for the page history is created These lines must also be added to the head of the HTML page and show the example with the template hutsch htt and the C Control unit with the name Hutschiene The HTML page content htm equals the default page on the ICB Note Hutschiene is an application of the C Control Station lt input type hidden name Command value Controller gt lt set controller hutschiene gt lt input type hidden name controller value Hutschiene gt lt input type hidden name PageOnClose value content htm gt lt input type hidden name PageOnUpa value hutsch htt controller Hutschiene gt lt input type hidden name PageOnSet value hutsch htt controller Hutschiene gt lt input type hidden name PageOnOk value hutsch htt controller Hutschiene gt The calls for a value request of the variables are implemented in tags in the HTML page which are introduced with the str
70. h 1 2 Bytes dependin ames This packet beginning consists of a fixed part and the packet middle consists of a variable part of which the length is 1 or 2 byte s depending on the length of the variable The packet end is a fixed part with the CRC field and the packet end field The beginning of the fixed part consists of the fields packet begin target address source address and the action code and has the same format as the initialisation packet With the field variable number the number of the variable is stored which can either be queried set or transmitted The number of the variable equals the position of the variable or respectively the order which has been announced by the initialisation packet The enumeration is restricted to 127 variables at maximum and the first variable gets the number 1 The query of all variables is possible by simply querying the variable number 0 The length of data field defines the length of the variable Here it s distinguished between 1 byte 0x01 and 2 bytes 0x02 Concerning the bit variables the length definition is set to 1 byte because the smallest possible transmission unit of the serial port is 1 byte The length definition must at last correspond to the variable type which can be seen in table 5 2 The following 1 or 2 byte s long data field contains the value of the variable In case of a query of a variable the data length field and the data field is left away so that in this case the CRC field a
71. he ICB in any way after this And if you give every user all kinds of access rights there might be the danger of an external manipulation of your data so that all your settings and configurations get lost The administration of the user accounts is done via the User Manager which you can access by clicking the user symbol or the user text link Benutzer Fakswort webmaster anonymous Hinzuf gen Entfernen Eigenschaften Abbruch Grafik Accou01 bmp Inthe user menu all existing user accounts are listed Here you have the possibilities to create new users change the passwords of existing user accounts change the properties of existing user accounts or to delete existing user accounts 9 4 Create a new user account To create a new user account click on the Add button in the User menu So you get to the Create User menu Here you can enter the shortname of the user into the textfield Name which must be entered at the login by this new user to access the ICB In the Full Name field you can optionally enter the full name of the user Please enter the password in the Password textfield and confirm the entry by retyping the same password in the Confirm password textfield Additional information and a detailed description of the user can be entered in the Remark textfield Activate the checkboxes full telnet access and access deactivated to meet your needs With the right for full telnet access this user has the right to acces
72. he Modem properties menu Enter the description of your modem in the Name field In the Init field you must enter the AT commands that are necessary to initialise your modem You also can enter the AT commands that are necessary for the dial up process in the Dialprefix field In the Hangup field the AT commands that are necessary to close the dial up connection must be entered Detailed information about the AT commands and the special for your modem necessary AT commands can be found in the manual of your modem Accept the newly created modem and its properties by clicking the Accept button so that you get back to modem properties menu where your new modem is listed If you want to dismiss the adding of the new modem just click on the Cancel button Eigenschaften des Modem Name Neues Modem O0 Init AT amp D2 BP hdice Frefix JATO Hangup ATH sis Grafik Modem02 bmp bernehmen 10 16 Changing the modem parameters In order to make changes to the parameters of an existing modem please click on the Properties button So you get to the modem properties menu where you can make changes in the Name Init Dialprefix and Hangup fields Accept the changes made by clicking the Apply button Dismiss the changes by clicking the Cancel button User Manual Content Seite 67 von 108 Eigenschaften des Modem Name Hayes kompatible Modem 202 Init ATX3MONIAD24K1 Prefix ATOT O Hangup TH Abbruch bernehmen Grafik ModemO03 bmp 10
73. he input by pressing the OK button NOTE Basically all serial ports of the ICB are set to 9600 Baud If necessary the transmission speed can be changed later in order to achieve the maximum transmission Capacity Grafik WNTINS20 BMP A Arbeitsplatz 2S el Datei Bearbeiten Ansicht 7 Heuer Telefonbucheintrag Netzwe Eintr ge Server Skript Sicherheit 3 Disk Typ des DF Servers PPP Windows NT Windows 95 Plus Internet od Netzwerk protokolle W TCP IP TLR IF Einstellungen D IPX SP kompatibel NetBEUI Inter Sushemst User Manual Content Seite 43 von 108 I Software Komprimierung aktivieren 1 Objekte n r e Abbrechen M Start Arbeitsplatz 09 37 Please deactivate the checkboxes Server Software compression and LCP extension for PPP Activate the checkbox TCP IP and press the button TCP IP properties So you get into the dialogue box PPP TCP IP properties Grafik WNTINS21 BMP PPP TCP IP Einstellungen x f P Adresse die dem Server zugeordnet ist Datei Bearbeiten 4r f IP Adresse angeben ae IP Adresse o 0 0 0 Metze Eintrac 3 Disk Typ de Namens ServerAdressen die dem Server zugeordnet sind PPP Namens ServerAdressen angeben Intern En in PIE en Metz imarer WHS T sekundare MHs 0 Eimar sekundare iis Aktenkotter M Start Arbeitsplatz 09 38 Uncheck the checkboxes use IP Prefix and compression IP Vorspann
74. he variable and optionally one option for the formatting User Manual Content Seite 83 von 108 of the variable are submitted The variable and the option are therefore parted by a comma and included in brackets together If you don t want to submit an option you mustn t enter the comma and the option so that only the variable is included in the bracket Before and after the complete function calling there must be a character which is illustrated in the example for the access on the weather station above The variables described in the following table can be implemented for function calls on the system and can be included in the message Variable Possible options Description memsize Korm Returns the size of the total available me memfree k orm Returns the size of the total free memory diskfree k orm Returns the free disc space on the hard hour None Returns the actual hour minute None Returns the actual minute second None Returns the actual second year None Returns the actual year month None Returns the actual month day None Returns the actual day dow None Returns the actual day of week hh mm ss Returns the full time i D date tt mm ccyy oder Returns the full date tt mmm ccyy oder tt emmmm ccyy version None Returns the actual version of the operatir uptime None Returns the time since the last boot proci ipaddress None Returns the actually assigned IP address The variable ipaddress returns the actual IP addres
75. hlie en So you get a view of the appropriate content of the Log file where all system specific parameters are listed in details In order to delete the Log files of a class mark the class of which the Log file should be deleted and press the Delete button The deletion process removes all class dependant Log files which are no longer available for display 11 TCP IP service programs In this chapter we want to introduce the TCP IP service programs with which you can copy files to or from your ICB execute commands directly on your ICB or test the connection to your ICB 11 1 FTP The access on files or whole file systems like for example the display of files or directories read or copy procedures on one system or to distant systems is performed by using the FTP The FTP comes from the TCP IP protocol surrounding and is the abbreviation for File Transfer Protocol The FTP makes it possible to transfer files from User Manual Content Seite 73 von 108 one system to a distant one or from a distant one with various platforms There is always one FTP server present which provides the FTP service and one FTP client which uses the FTP service Between these two systems the files can be transferred In order to transfer files to or from the ICB there is a FTP server integrated in the ICB So you are able to execute common file operations like copy or delete files directories or create files directories from your PC on the distant ICB Therefore
76. igenschaften Abbruch Grafik Dialup04 bmp 10 22 Controller You can connect up to three C Control units or other devices next to a modem that support the C Control protocol at the same time The C Control protocol is described in deltails in the chapter 14 Das C Control Protokoll The connected C Control units login to the ICB during their initialisation process via the C Control protocol with their names and amount of variables The ICB checks on every login if this C Control unit has previously logged into the ICB If this is true the ICB uses the previously saved information about his C Control unit In the case of being the first login of the C Control unit the name of the C Control unit and the available amount of variables are recorded into the list with a default poll cycle of 10 seconds For the display of the connected C Control units and their status their variables and each poll cycle of each variable the Controller menu is responsible Click the Controller symbol or the Controller text link in the menu bar to start the Controller menu So you get to the C Controller menu where all the logged C Controllers are listed User Manual Content Seite 70 von 108 U Controls Entfernen Eigenschaften gt chlieen Grafik Contro01 bmp In the C Control unit menu you have the possibility to display the properties of C Control units or to delete existing C Control units 10 23 How to display and change the C Control Un
77. in two parts On the left side you have the menu bar where you can get into the specified menu by just clicking the appropriate text link Additionally there is a symbol bar in the upper part of the user interface where you can also get to the specified menu by just clicking the appropriate symbol In the administrative section not all menus can be accessed via the symbol bar so that you can only use the menu bar for accessing special menus Grafik Ober01 BMP 3 WEBMachine Microsoft Internet Explorer File Edit View Go Favorites Help Se 9 8 A 8 8 E Fa Back Raritan Stop Refresh Home Search Favortes History Channels Fullscreen all Address E http 7 195 1 1 1 index htm tie aS Ae Technalagle System Hutschiene Wetterstation Administration Internet Connector Box ICE v1 03 on Datum 14 7 1399 65535 MaA Hutschiene in Betrieb set m 16 5 Wetterstation Speicherplatz 1024 KB tre 604 EB Platten Gr e 1720 ERB frei 216 EB Administration Compu Shack GmbH Benutzername und Paliwort bei Newnstallation Benutzername admin Fahwort adm n g Done Ber Internet zone Mstar fe WEBMachine Micro For the configuration of the ICB you have to get to the Administration menu by clicking the Administration symbol After that you will be prompted to enter username and a password Enter admin for both the username and the password and confirm your inputs by clicking the
78. ing lt and which are ended with the string gt The variables itself are enclosed in characters Example for the call of a C Control unit variable lt controller get controller name variable name gt Example for the call of a System Variable lt system get variable name gt Basically the implementation of system variables and variables from external connected C Control units is possible The system variables are called by system get and the controller variables are called by controller get The amount of C Control unit variables is according to the amount of previously defined C Control variables User Manual Content Seite 94 von 108 Time formatted hh mm ss Datum formatted dd mm cc dd mmm ccyy or dd mmmm ccyy Concerning the date and time variables the formatting type behind the variable must be divided by a comma For example a call for the system time has to look like that system get time hh mm ss Another possibility of integrating variables in a HTML page is the controller if query With the controller if query conditions of the C Control unit variable can become substantial for the output of a certain text or image So for example LED symbols whose colors depend each depend on an actual variable of the C Control unit can be implemented in the HTML page with different colors The controller if call has the following format lt controller if controller name variable name if TRUE if FALSE opt
79. interfaces are set to a baud rate of 9600 bits per second 8 data bits no parity check one stopbit use of RTIS CTS protocol and the use of the FIFO puffer If you want to change this standard configuration on one of the existing serial ports you have to do this in the Port menu The port menu can be accessed by clicking the Port symbol or the Port text link in the menu bar In the ports menu you get a list of all existing ports enumerated from COM1 to COM4 User Manual Content Seite 65 von 108 Ports Eigenschaften coms come Schlie en Grafik PORT001 bmp lf you want to change the properties of one of these interfaces please mark the interface and select the properties button so that you get to the appropriate port properties menu In the port properties menu you can select the bits per second in the Baudrate field between 1200 2400 4800 9600 19200 38400 57600 and 115200 The Data Bits field specifies the amount of used data bits between 4 5 6 7 and 8 The parity checking can be set to Even Odd None Mark and Space in the Parity field The number of stobits can be selected between 1 and 2 bits in the Stopbits field The protocol for the handshake can be selected between None for using no protocol the XON XOFF protocol the RTS CTS protocol and the DTR DTS protocol The checkbox FIFO active and the Sending puffer and Receiving puffer fields let you adapt the FIFO to the serial interfaces The activation of the FIFO is done by ac
80. ional not defined gt Between the brackets the condition for the output of the text is defined and each argument is separated by acomma The first argument in the bracket is the controller name The second argument is the name of the variable Ifthe call is a condition which refers directly to the C Control unit for example if it s active or inactive the definition of the variable is left away and the place of the variable argument is left blank Normally all following positions are optional so that their positions can also be left blank The third position defines the text which is in this case returned if the condition is true The fourth position contains the text which should be displayed if the condition is false At last the text is defined which should be displayed if the value is not set The four examples for a definition of a controller if call are listed below User Manual Content Seite 95 von 108 1 For the output of a status message of the C Controller with the name hutschiene The C Control unit is lt controller if hutschiene activ inactiv gt 2 Implements the yellow LED symbol yellow on gif or yellow off gif depending on the status of the C Control unit hutschiene into the HTML page img src images yellow lt controller if nutschiene led1 on off gt gif 3 Gives back the information of the function key f1 of the C Control unit hutschiene If the value of the function key is not defined a blank character is return
81. it Properties Mark the chosen C Control unit in the list of C Control units and click on the Properties button to display the properties of this C Control unit So you get to the properties menu of the selected C Control unit In the properties menu you find a status message which indicates with Active an operating C Control unit and with Inactive a C Control unit which is either not turned on or not connected to the ICB at the moment Below the status message there is a list of all available variables of the C Control unit Eigenschaften von hutschiene Status active sf ochliel Grafik Control02 bmp TempMax m Schlie en lf you want to display the properties of a C Control unit variable mark the chosen variable and click the Properties button so that you get to the variable properties menu In the variable properties menu you have the possibilities to read out the variable type and the value range of the variable and to set up the poll cycle of the variable Eigenschaften der C Control Vanablen Name Temp Wert 53 0 Typ Integer 16 But Einheit arad Bereich A Pollzyklus fim l Abbrechen Ubernehmen Grafik Control03 bmp Please remember that after the first login of a C Control unit the poll cycle of all available variables is set to 10 seconds Therefore it is sensible to set up the poll cycles of the C Control unit variables to values that meet the individual requirements of your application User Manual Content
82. l unit so that there are new variables introduced please delete the C Control unit and his old parameters with the Controller Menu from the Controller list before you make the new initialisation consult chapter Configuration of the ICB Beside the possibility of querying available variables of the C Control unit in regular User Manual Content Seite 97 von 108 intervals it is also possible to let set single variables of the C Control unit be set by the ICB Therefore the variables which are set to changeable come into consideration So it is for example possible to fix the setting of variables in certain event activated actions 14 4 Implementation of the C Control protocol For the implementation of the C Control protocol in your program you must make following additions to your program code For the registration at the ICB the C Control unit must send CCEINIT strings If the ICB receives those CCEINIT strings it responds with a initialisation request Then the C Control unit sends a initialisation packet where all the variables of the C Control unit are listed in Then the actual communication between the ICB and the C Control unit can take place in form of variable request and appropriate answers and the setting of variables If there is no data communication between the C Control unit and the ICB the C Control unit must send its CCEINIT string again in order to announce his still active state If the ICB doesn t receive the CC
83. ld you can enter the name of your domain which must be entered in the form domain name de In the Primary DNS field you can enter the IP address of the DNS server and additionally for redundancy purposes the IP address of a Secondary DNS server in the Secondary DNS field The secondary DNS is used for converting the domain names to IP addresses if the primary DNS is temporarily not available save this entries by clicking the Apply button or cancel your inputs by clicking the Cancel button 10 3 Services The different functions of the ICB like for example the HTTP server or the FTP server User Manual Content Seite 59 von 108 are made available by the ICB with so called services Each service can by configured adapted in the Services menu Generally no changes in the configuration are necessary here but if it is necessary in some cases be careful with changing the existing configurations Corrupted configurations or forgotten adjustments to the services can for example make the access on the administrator area via a web browser impossible lf you want to look at the configuration of the services or if you want to change to properties click on the Service symbol or on the Service text link in the menu bar in order to get to the Service menu Liste der Dienste FIP Serer vv ebMachine SNMP Eigenschaften CCG server WebEngine Abbruch In the service menu you get a listing of all services and the possibility to change the prope
84. le and in the value field the value that has to be set The available variables of the specific C Control unit can be displayed in the C Control properties menu Setzen einer C Control Yar ablen Verwendung Control Variable auf vorgegebenen Wert setzen C Control hutschiene Variable le Wert Grafik Action05 bmp Ubernehmen 12 17 Action class Send file via ftp The parameters that are necessary for the sending of the file via FTP must be specified in the properties field for the send file via FTP class Following single parameters must be defined In the Provider field one of the pre defined providers must be selected All providers that have been previously defined via the Dial Up function are available here In the Host field the target host is entered to which the file should be sent like for example ftp compu shack de With the Username and password fields the username and the password that are necessary to upload the file on the specified target server can be defined In the Remote Directory field the target directory on the target host can be defined and the Remote file name field defines the name of the file on the target server under which the sent file is saved By activating the checkbox Add data you can define if the data of the local file should be added to an existing file on the target server The Local file name field defines the file name of the file with the data on the ICB that should be transferred to the targ
85. les to or from distant systems with different platforms So there is always a FTP server which supplies the FTP service and a FTP client which uses the FTP service Between those two systems the files are transferred User Manual Content Seite 62 von 108 In order to make the transmission of files from or to the ICB possible a FTP server is integrated in the ICB So you have the possibility to make common file operations like copying files creating new directories or deleting files or directories on the distant ICB from your local PC Therefore the ICB can be accessed via a local direct connection to the PC or via a connection to the internet So you can copy files to or from the ICB which is for example necessary for an update of special files or for the creation of own HTML pages consult chapter TCP IP service programs You can specify the TCP port number the root path for the FTP access the wait time and the maximal number of user for the FTP server service Eigenschaften von FTP Server WebMachine TCP Port i FTF Root Verzeichnis Bo Timeout soo max Nutzer eo Grafik Servic08 bmp Abbruch bernehmen The used TCP number is specified in the TCP port field Basically this value is set to 21 which is the standard TCP port for the FTP The Root field specifies the root directory for the FTP server on which or respectively from which the access via FTP is granted Per default this value is set to which equals the root of the file s
86. ly installed DFU Network from RAS capable devices and confirm this by pressing the OK button Grafik WNTINS10 BMP MS RAS Setup Anschlu erat COM DFU Netzwerk mit zeriellem Modem unimadem w eiter Abbrechen 4 Netzwerk Intern Hilfe Hetzwe Hinzufugen Entfernen Konfigurieren Duplizieren 1 Objektfe markiert Aktenkotter H Start Arbeitsplatz DFU Netzwerk 09 17 In the next dialogue box RAS Setup please press the Next button Grafik WNTINS11 BMP Ma Arbg Datei Anschlu erat Typ HAS Setup E3 3H Es wurden keine Wetzwerkprotokolle fur RAS gew hlt Moglichenvese haben Ste die Netzwerfunktionalit t auf Ihrem Computer richt Hetzwe installiert Wahlen Sie mindestens ein Protokoll f r AAS Setup wird das gew hlte Protokoll installieren Intern Ssh User Manual Content Seite 37 von 108 1 Objektfe markiert en a Aktenkotter H Start Arbeitsplatz DFU Netzwerk 09 17 lf there has not yet been a network component installed on your computer you will receive the warning that there must be installes at least one protocol for RAS If this happens please confirm this by pressing the OK button Grafik WNTINS12 BMP Mis gt Datei L Anschlu Hetzwerkkonfiguration Client Protokolle c C NetBEUI re Fechner IY TERAF ns Hilfe Hetzwe Intern Ssh Hinzufugen Entfernen Eonfigurieren Duplizieren 1 Objekt
87. m properties In the new frame Systemsteuerung or System properties click the Modems symbol After that a new dialogue box Install anew modem opens Grafik WNTINSO1 BMP Windows MT versucht jetzt das installierte Modern zu identifizieren Zuvor sollten Sie jedoch folgendes sicherstellen 1 Stellen Sie bei einem externen Modem sicher dal dieses eingeschaltet ist amp Beenden Sie die Anwendungen die das Modem verwenden Klicken Sie auf Vetter sobald Sie bereit sind M Modem ausw hlen Keine automatische Erkennung meee E C ahr ftarker CCC LA dankar C arar nstallert neue Modems oder andert die Modemeinztellungen Aktenkoffer M Start Arbeitsplatz a select the checkbox next to Select modem no automatic detection or Modem auswahlen keine automatische Erkennung and then click the Next button After that a list of all available modem drivers and devices sorted by their manufacturers opens 09 07 Systemsteuerung Grafik WNTINS02 BMP User Manual Content Seite 31 von 108 MS Neues Modem installieren ar Klicken Sie auf den Hersteller und das Modell des zu installerenden Modems chee Wenn das betreffende Moden nicht aufgefahrt wind und Sie den Treiber won ne der Diskette inztalleren mochten klicken Sie auf Diskette letze Hersteller Modelle Standard Moderntypen DFU Netzwerk mit senellen Kabel zwischen 2 PCI Yorceview Moderntepen Standard 300 bps Modem
88. manager Logdatei berlauf Verwendung Ereisms bei Losdater berlauf Losdatei von Schreibe Log Datei Abbruch bernehmen Grafik Alarm003 bmp 12 6 Event class System Variable By selecting the system variable class you can define events that base on variables which are sent by the ICB Following variables are possible Variable Explanation memsize Size of the random access memory in bytes memfree size of the total memory available in bytes diskfree Free space available on the hard disc in bytes User Manual Content Seite 79 von 108 The definition of the system events is made in the two fields variable field and value field With the variable field the name of the variable is defined for example memsize entered In the expression field the value of the variable and the mathematical operator is entered Possible mathematical operators are lt for smaller gt for greater for equal lt for smaller or equal gt for greater or equal and for not equal System Variable berpr fen Verwendung System Variable mit vorgegebenem Wert vergleichen Yar able Month r Ausdruck l Abbruch bernehmen Grafik Alarm004 bmp 12 7 Event class Combined Event With the combined event class two events can be logically combined if they have been previously defined Therefore you must enter a name for the combined event in the name field of the Define a combined event menu In each s
89. mbinations menu you get to the Properties of combinations menu where you have to define the name of a newly created combination and to select an event and an action User Manual Content Seite 89 von 108 Eigenschaften der Verkn pfung Verkn pfung Unterschreitung der Temperatur Ereignis Temperatur unter 20 C Aktion Schreibe Log Datei Juuunnnunun aktiv Mi Abbruch Welter Grafik Rules002 bmp __ Weiter If you define the name of a new combination you should use clear and meaningful names for it So you should for example give a time dependant rule that happens every 10 minutes the name After 10 minutes The use of clear understandable names makes it more easier to relate the rules with the functions In the Combination field the name of the combination must be entered In the event field an event can be chosen out of all the events that have been previously created in the event manager In the action field an action can be chosen out of all the actions that have been previously created in the action manager The checkbox active decides about whether the combination should be activated or not Activate the combination by checking it If you don t want to activate this combination at the moment you can later do this by changing the combination properties Confirm the definition of your new rule by clicking the Next button So you get back to the Administration of combinations menu where your newly created combination is listed up
90. mindestens eines Dienstes der beim Systemstart gestartet werden sollte schlug fehl berpr fen Sie das Ereignispratok oll 6 Objekte Aktenkofter H Start E Arbeitsplatz 5 Dienstkontroll M anager 09 22 Note After having restarted your computer you will normally receive an error message that at least one service couldn t be started The cause of this problem is the fact that there has been installed a Service Pack from Microsoft on your computer Usually Service Pack 3 or Service Pack 4 are installed on most Windows NT systems in order to guarantee a more stable Windows NT system But for the installation of the DFU Network there have been installed some software components from the Windows NT CD For this reason there are different software versions of components and drivers on your system which may not be able to correspond with each other any longer so that some services cannot be started To solve this problem the appropriate Service Pack must be re installed After you have re installed the Service Pack and rebooted your system the software versions should normally be updated and all services should start up without problems If you have to re install your Service Pack simply follow the instructions supplied by Microsoft User Manual Content Seite 40 von 108 8 3 Configuration of the DF connection After the installation of the software compoments for the DFU Network the DFU connection with the ICB must be configured
91. ministration Platten Gr e 1 20 KB fre 216 EB Compu Shack GmbH nn Benutzername und Pahwort he Newnstallation Benutzername adm n Fahwort adm n E Tr Tem Mstar FE WEBMachine Micro Shut this window and open your standard web browser Netscape Communicator or Microsoft Internet Explorer and enter http followed by the IP address 198 1 1 1 in the address line of your web browser The address line has to look like http 198 1 1 1 Grafik W95INS29 BMP Ej WEBMachine Microsoft Internet Explorer Datel Bearbeiten Ansicht Explorer Fawonten 7 x gt o U m ad Fre amp x amp Zuck Vorvearts Abbrech Aktualis Startseite en Favoriten Drucken Schriftgr Mail Adresse http 198 1 1 1 ICB Systeminformation Internet Connector Box Version Co Vebhachine 1 01 SysDescr WebEngine SysUplTime 22 m 40 s SysObjld 1 3 6 1 4 1 349 17 Sys anat sig stephan Introduction erstem Info 7 ne u User Manual Content Seite 29 von 108 Weather station sysName Widz SysLocation 56564 Neuwied Germany p A dirurustration sh Start Arbeitsplatz IE WERMachine Micro Pe The configuration of the ICB or the installation of event based actions has to be done in the Administration menu You get there by simply clicking the Aministration text link Enter admin as username and password in the dialogue box that shows up Grafik WNTINS29 BMP WEBMachine Microsoft Int
92. n with the combination manager These three necessary steps are each described in the following chapters so that you will be able to define your own events actions and links between events and actions after the explanation The order of the three steps changes if you want to define a Log file event If you want to define a Log file event you first have to define a Write to Log file action in order to relate the Log file event to this action 12 2 Definition of a new event lf you want to define an event you first have to start the event manager by clicking the event menu so that you get to the Event administration menu User Manual Content Seite 77 von 108 Yerwaltung der Ereignisse Entfernen Eigenschaften Abbruch Inthe Event administration menu you have the possibility to change the properties of a pre defined event or to delete an existing event or to create a new event By clicking the Add button you get into the Properties of event menu where you can create a new event Here you must enter aname for the event and select an event class Depending on the event class you should enter a name which describes the event really good so that it is easier to combine it later So you should for example give a time dependant event which is set to 10 minutes the name 10 minutes The use of meaningful names makes it easier to relate the events and their cause The event name must be entered in the event textfield Atthe moment you have followin
93. nal information to the Hardware and chipPC Technology is to be ound under http www mmc ag com or http www mmce com Further applications hints utility programs for the ICB is to be found under http www mmc ag com or http www mmce com and the product name Internet Connector Box Information to the Web Technology is to be found under http www compu shack de production 049 icb icb htm 16 Glossary Account Access right consisting of a username and a password for the access on a computer or Server Anonymous Anonymous access on a server like for example on a FIP server or ona WWW server without using a special account and therefore the access rights are limited for this type of access Applet A program written in Java that is executed and loaded by the browser automatically from the server Browser A program for browsing and viewing web pages in the HTML language like the Microsoft Internet Explorer or the Netscape Navigator from Netscape User Manual Content Seite 104 von 108 CA Certificate Authority Place of certification where you can get keys for transmitting secret data to secure the data from manipulation and the certify the identity of the author Cache Local memory or directory where the web browser saves downloaded data to avoid downloading the same data again in order to optimise speed and to lower transmission costs CCG is the abbreviation for Communication Gateway The ICB supports the function of
94. nd the packet end field follow directly after the field with the variable number of the variable The following example shows a program code for the transmission from the C Control unit to the ICB of the first variable which is 1 byte long put amp HAE Packet begin put amp H80 Target address put amp H17 Source address put amp HO3 Action code CCE GET RES put amp HO1 Variable with the value 1 put amp HO1 Variable with a length of 1 Byte put amp H45 Value of the Variable put amp H2A Without CRC calculation put amp HAF Packet end 14 6 Program code example There are three program code examples on the supplied CD from which you learn about the implementation of the C Control protocol for C Control variants C Control Basic C Control Station and C Control Weather Station In the beginning of this program code example the declaration of all necessary packet User Manual Content Seite 102 von 108 fields attributes and actions is made Then comes the declaration of all variables of the C Control unit which are independent from the C Control protocol Following are the routines for sending the CCEINIT string for the query of the variables the setting of the variables and the sending of the initialisation packet and the data packets 14 7 Running the C Control unit at the ICB for the first time Before you connect the C Control unit to the ICB and operate it for the first time you have to carry out the foll
95. ne of the described entry fields and if you want to accept these changes please click on the Apply button If you want to dismiss the changes click on the Cancel button 10 12 CCG Server Properties CCG is the sort form for Communication Gateway with which a C Control unit can be accessed directly via Java applets A Java applet is a program written in Java that is loaded and executed from the server automatically by the web browser The CCG is a Special protocol that makes the direct access on the C Control units connected to the ICB possible A detailed description of the CCG can be found in the chapter 13 2 CCG Server For the CCG the TCP port number the wait time and the number of maximal users can be specified Eigenschaften von comserver TCP Port SITE max Users e Timeout s kec Grafik Servic11 bmp _ bemehmen The used TCP port number is specified in the TCP port field Basically the value of the TCP port is set to 5108 The Timeout value specifies the wait time that determines the wait time for how long a connection to the CCG is hold if no data transmission is in progress This wait time is basically set to 800 which equals a wait time of 800 seconds The Max User field specifies the maximal number of users that can access the CCG at the same time The standard maximal user number is set to 2 user per default 10 13 Configuration of the serial interfaces The ICB has four serial interfaces Basically all four serial
96. nt connection lf you now want to look at the properties of one of these connections you must go to the Connection menu which can be accessed by clicking the Connection symbol or the Devices text link Liste von Verbindungen Eigenschaften gt chlieen Grafik Geraet01 bmp In the connection menu all now active PPP connection are listed which are enumerated with PPP1 to PPP4 If you want to look at the status or the properties of the PPP User Manual Content Seite 56 von 108 connection just mark the correct PPP connection and click on the Properties button so that you get to the appropriate Connection Properties menu Verbindung pppl Name ppp HW Addresse COMA Beschreibung PER Status up verbunden seit 01 47 54 verbunden mit 115200 bps IP Addresse 198 1 1 1 Gateway 2 0 0 0 IF Netmaske 1 0 0 0 Z hler Bytes gesendet 231753 Bytes empfangen 259959 Aktualisieren Schlie en Grafik Geraet02 bmp In the Connection Properties menu all used serial interfaces the used IP address and the transmission statistics are displayed Following properties are displayed in details in the Connection Properties menu which are described below The HW Address field specifies the serial interface which the device is connected to In the description text field the device type is described The Status field shows the status of the device which can be active or inactive In the Connected with field the actually used transmission speed
97. nt display 11 TCP IP SERVICE PROGRAMS 11 1 FTP 11 2 Telnet 11 3 Ping 12 CREATION OF EVENT BASED ACTIONS 12 1 Release of an action 12 2 Definition of a new event 12 3 Event classes 12 4 Event class Controller Variable 12 5 Event class File Event 12 6 Event class System Variable 12 7 Event class Combined Event 12 8 Event class Timer 12 9 Event class Internet 12 10 Changing the properties of an existing event 12 11 How to delete an event 12 12 How to define actions 12 13 How to create a new action 12 14 Action classes 12 15 Action class Log to File 12 16 Action class Set controller variable 12 17 Action class Send file via ftp 12 18 Action class System command 12 19 Action class Write to LCD 12 20 Action class Connect Disconnect to Internet 12 21 Action class Send Template 12 21 Changing of the properties of existing actions 12 21 How to delete an action 12 22 Combination of events and actions 12 23 Adding a new combination 12 24 Changing the properties of an existing combination 12 25 Deleting an existing combination 12 26 Apply the changes in a combination 13 CREATING OWN HTML PAGES 13 1 Gateways 13 2 CCG Server User Manual Content Seite 4 von 108 13 3 Implementation 14 THE C CONTROL PROTOCOL 14 1 Connection of the C Control unit to the ICB 14 2 C Control BASIC programs 14 3 The communication via the C Control protocol 14 4 Implementation of the C Control protocol 14
98. of the internet service providers support own Timeout functions The internet service providers assign one unique IP address for each internet session For each login to internet an IP address from is selected from an address pool and assigned to the ICB So each internet service provider and each connection can have different IP addresses as a matter of fact The simplest way is to get an account with a fixed IP address The IP address is now public so the ICB can be easily accessed via Internet If you have no fixed IP address you first have to transmit the assigned IP address to a permanently online web server after you have made connection to the internet By transmitting the assigned IP address it has been accessible for all external users so that it s now possible to access the ICB with this IP address on the web server The transmission of the IP address requires the event class Internet and the action class Send Template In this case define the event class Internet and the action class Send Template after the appropriate requirements and make the appropriate combination of the event and the action described in event class Internet and action class Send Template You can also get the IP address in the menue Connection look under chapter Configuration of th ICB or after the connection has been established in the first row of the display When you have not the possibility to read out local the IP address and want to access yo
99. ollowing example shows the declaration of all necessary constant and then a program code shows how to send a initialisation packet with the content of a variable In the initialisation picket you can see that the inserted ESC sequence signalises where User Manual Content the highest bit of a data byte is set define VAR_INT amp HO2 define VAR_SCALING amp H08 define VAR_WRITABLE amp H10 define VAR_VOLATILE amp H20 define VAR_WRITEONLY amp H40 define VAR_HASRANGE amp H80 put amp HAE put amp H80 put amp H17 put amp H08 put amp H43 put amp H43 put amp H45 print Hutschiene put 1 print Temp 1 put amp HA8 put VAR_INT VAR_VOLATILE VAR_HASRANGE VAR_SCALING print 275 1000 print Grad C put amp HA8 put 1 put amp H2A put amp HAF Seite 100 von 108 word variable 16 bit with scale amount is settable is changeable can NOT be read with value range Packet begin Target address Source address Action Code CCE_INIT DEV _ID1 DEV _ID2 DEV _ID3 C Control name and CR LF Amount of variables Variable name and CR LF Esc Sequence Variable attributes Range min max Unit Esc Sequence Scale amount10 1 1 10 Without CRC calculation Packet end For the data transmission between the ICB and the C Control unit the following packet format is used User Manual Content Seite 101 von 108 NEE GE Data array wit
100. onenten SE Multimedia m Sprachenunterstuteung 0 0 ME O ES The Microsoft Network 0 0 MB a Verbindungen 0 7 ME A Zubeh r 100MB Speicherplatzbedarf 1 2MB Modems verf gbarer Speicherplatz 1535 05 MB Beschreibung Ubehor fur die Verbindung mit anderen Computern und Unline Systemen 2 von 4 Komponenten ausgew hlt Details Software fH Start E Click on connections then on details Grafik W95INS06 BMP Eigenschaften von Software io FE ene ell eel Yerbindungen E4 klicken Ste auf die Kontrollkastchen der Komponenten die hinzugefugt bzw entfernt werden sollen Grau getullte Kastchen kennzeichnen Komponenten die nur zum Teil installiert werden weitere Informationen erhalten Sie uber Details komponenten Fal DF Netzwerk TEN al HuperTerminal 0 5 ME E FL Direktwrerbindung 0 5 ME yy ablhilfe 0 2 MB El Speicherplatzbeda rf ZU ME Verugbarer Speicherplatz 1533 4 ME Beschreibung Erm glicht es Ihnen per Modem eine Yerbindung zu anderen Computern herzustellen Software Details Abbrechen 13 36 User Manual Content Seite 16 von 108 M Start 1337 In the connections dialogue box check the marker for DF Network and then confirm with OK Confirm again with OK Systemsteuerung Grafik W95INS07 BMP Eigenschaften yon Software _ Io m Uhrzeit Drucker InstallierenDeinstallieren
101. orithm IETF Internet Engineering Task Force Arbeitsgruppe die die TLS definiert Internet World wide non central network that has been introduced as a US military only news system based on the TCP IP protocol In our days the internet is the most popular world wide network for the international exchange of information Intranet Network in a company which bases on internet technologies and the TCP IP protocol IP Adresse World wide non central network that has been introduced as a US military only news system based on the TCP IP protocol In our days the internet is the most popular world wide network for the international exchange of information Intranet Network in an enterprise which bases on internet technologies and the TCP IP protocol IP Address Uniquely distributed address of a computer looking like 198 1 1 1 The IP address consists of four numbers from 1 to 255 which are divided by points To the IP address belongs the so called subnet mask which divides the given IP address into the parts for addressing the network or subnets and into the part for addressing the station in the network or subnet This kind of addressing can be compared with mail addresses which are given by a street name network or subnet address and a house number station address The TCP IP addresses are often assigned dynamically by the appropriate Internet Service Provider ISP IT Internet Technology Java A programming language developed by Sun where th
102. ose rights and the FTP access path are defined like listed in the following table ecko ean Tasbmaser anonmau Voller Telnet Zugriff Yes FTP Verzeichnis www FIPGET Yes Yes Yes User Manual Content Seite 54 von 108 FTP PUT Yes ves FTP DELETE Yes Yes FTP MKDIR Yes Yes FTP RMDIR Yes Yes Default PaBwort admin webmaster No password You should specify new passwords for these user accounts out of security aspects but you should never delete one of these users so that the access on the data of the ICB is always granted Remember to note the username and the appropriate password somewhere and to secure the note in a safe place Mark the user account and click the properties button in the user menu in order to change the properties of an existing user account So you get to the properties menu of the selected user account where you can change the properties in the fields which are described in the chapter Create a new user account Confirm the changes by clicking the Apply button so that the changes are accepted If you want to cancel the changes press the Cancel button Grafik Accou02 bmp Benutzer anlegen Name Mustermann Voller Name Mustermann Pa wort Eli Pa wort best tigen Sd Bemerkung Beispiel mit Mustermann 020203030 I voller Telnet Zueri Zugang gesperrt FIP Rechte Login Verzeichnis anand Rechte W GET M PUT M DELETE I MEDE IT RMDIR Anlegen 9 6 How to delete user accounts To d
103. owing three steps 1 Writing the program or respectively add the C Control protocol to the program 2 Compilation of the previously created program 3 Transmission of the program code to the C Controller by the C Control unit development kit After that plug the DB9 female connector to a free serial port of the ICB Then start your C Control unit so that it should send a CCEINIT string in order to let the ICB start up the C Control protocol After the start of the C Control protocol the C Control unit is requested to send its name amount of variables and the existing variables and their respective attributes to the ICB The C Control unit will then send its name amount of variables the existing variables and their respective attributes to the ICB The ICB then writes all those information to the INI file Since then the new variables are available to the ICB The variables and their respective poll cycle can be requested and adapted in the controller menu of the ICB The procedure is described in the chapter Configuration of the ICB For the implementation of the variables in events consult the chapter about the Installation of event based actions See the documentation of chapter Creation of HTML pages for the implementation of variables in HTML pages 15 Technical Data Supply voltage 9V to 12V DC voltage input Current consumption 470mA at 5V permissible humidity 0 60 C 20 60 relative humidity 15 1 Hardware Integra
104. ped with which all servers can be accessed next to their normal IP address with an individual name In the internet therefore a hierarchical name concept is used with which a bunch of servers is grouped under so called domains A domain equals for example a group in form of acompany For example all servers belonging to the company Compu Shack are available under the domain Compu Shack de and almost all servers in Germany belong to the domain de This last part of the address which is de in this example and stands for Germany is called top level domain The top level domain is basically the code of a country which equals with the ISO 3166 country code tables Next to the ISO country codes following common top level domains are also used very often in the internet COM Companies commercial organisations EDU Research facilities universities only USA and Canada GOV governments and governmental institutions only USA INT International organisations MIL US Military NET Network administration and providers User Manual Content Seite 58 von 108 ORG Other non commercial organisations Each computer in a domain has his own host name with which he is addressed in the domain For the administration of the domain and the conversion of the domain names to IP addresses the so called Domain Name Service DNS is responsible Normally every domain has its own DNS All servers login at the DNS with their host names and IP addresses
105. pen 198 1 1 1 The following information will be displayed fto gt To Connected to 198 1 1 1 220 WEBEngine FTP version 1 01 80386 220 Ready on Wed 23 Jun 1999 10 26 04 GMT User 198 1 1 1 none admin After this you will be asked to enter a username Enter admin as username und use admin as password after you have been asked to enter your password For the FTP access all users with the appropriate FTP rights can be used The installation of additional users with FTP rights can be done in the user menu The installation procedure is described in details in the chapter Configuration of the ICB 331 Enter PASS command 230 admin logged in After the successful establishment of the connection to the ICB you can execute commands for the file transfer The following listed FTP commands may help you controlling the commando based FTP client User Manual Content Seite 74 von 108 FTP command Explanation oO Q ye Shuts down the FTP connection with the ICB and quits the FTP com Changes the directory on the ICB close Shuts down the FTP connection with the ICB without quitting the FTF delete Deletes a file on the ICB dir Shows a detailed list of the actual directory on the ICB disconnect Shuts down the FTP connection with the ICB without quitting the FTF get Copies a file from the ICB to the local PC help Shows a summary of all FTP commands enter and you get the si mdelete Deletes several files on the ICB mget Copies one
106. r Click on Modem Click on Installing new modem Grafik W95INSO1 BMP my Datel Bearbeiten Ansicht 7 Allgemein Diagnose Drucker m ae Neues Modem installieren LETTE Windows versucht jetzt das installierte Modem zu identifizieren Zuvor sollten Sie jedoch folgendes sicher dal dieses eingeschaltet ist amp Beenden Sie die Anwendungen die das Modem versenden sicherstellen 1 Stellen Ste bei einem externen Modem Papi A j Klicken Ste auf weiter sobald Sie bereit sind Posteing Modem ausw hlen Keine automatische Erkennung Online Die EJ S The Micra S EUCH Abbrechen i Hetwork lnst M Start Arbeitsplatz E Click on Button Select Modem no automatic control Click on Further Then you see different types of modems listed 13 12 Systemsteuerung Grafik W95INSO2 BMP my Datel Bearbeiten Ansicht 7 Neues Modem installieren Klicken Sie auf den Hersteller und das Modell des zu installierenden Modems Wenn das betreffende Modem nicht aufgef hrt wird und Ste den Treiber von der Diskette inztall erten mochten klicken Sie auf Diskette Interne Modelle Genenc NULL Modem RAS Parallel Cable between 2 PCs RAS Serial Cable between 2 PCs Hersteller MULL Modem Types Standard Modern Types Moncey ew M odentyper cts Aceex Acer Pap User Manual Content Seite 13 von 108 I
107. re you can make your changes in the fields and selectors described above Apply and update the changes by pressing the Apply button after you have finished your changes If you want to dismiss your changes please click on the Cancel button User Manual Content Seite 81 von 108 12 11 How to delete an event To delete and event you first have to select the event which should be deleted in the administration of events menu and then click on the Delete button so that the appropriate event is deleted 12 12 How to define actions To define a new action go to the administration of actions menu by clicking the actions menu so that the action manager is started Yerwaltung der Aktionen eorsende Lo g Latei Schreibe Log Datel Entfernen Eigenschaften l l Abbruch Grafik Action01 bmp In the Administration of events menu you can change the properties of existing actions delete existing actions or create new actions 12 13 How to create a new action You can create a new action by clicking the Add button and adding a new action Eigenschaften der Aktion Aktion Klasse iicsuneee Abbruch Weit Grafik Action02 bmp eiter After that you will get to the Properties of action menu where you can define the name and the class of the action First you must enter a name for your new action in the action field then you must select one of the available classes from the class selector 12 14 Action classes Following classe
108. realised The standard operating systems like Windows 9x and Windows NT offer all protocols the ICB needs The following chapter describes the complete installation step by step under the operating systems Windows 95 Windows 98 and Windows NT 4 0 This is necessary in User Manual Content Seite 11 von 108 order to establish the direct communication with the ICB Problems can be caused by the fact that some PCs are differently equipped For example there could already exist an internet or network connection on the PC Under these circumstances different solutions are possible A step by step installation is therefore limited In this description we used only operating systems which do not yet have a connection to the internet or to other networks So you have the complete installation step by step you need for installing a ICB to access the internet 6 3 Connection to the ICB Before you start with the installation of the direct connection the Nullmodem Cable must be connected between one of the four serial ports of the ICB and one of the serial ports of the PC Activate the power supply connected to the ICB The recommended power supplies are described above After power is turned on the ICB starts the initialisation process The initialisation routine is over when the 2 row display of the display shows the ICB software version the actual date and the actual hour ICB x yz dd mm ccyy hh mm 7 Installation under Windows 9x We start
109. removed your access to the ICB completely by a wrong configuration we as the manufacturers could possibly access your ICB via the remote way and reinitialise an emergency configuration of your ICB lf you want to prevent this operation just take away the Telnet access rights for the user admin In this case install a new user with a password and the Telnet access rights And please remember to note the username and the password and keep the notice in a safe place 11 3 Ping The Ping is a diagnose utility with which the TCP IP connection to a remote station can be tested The Ping command tests the connection by sending a special ICMP echo packet to the remote station With this ICMP packet the remote station is asked to send back a certain amount of ICMP response packets The receiving of the ICMP response packets determines at last if the connection is Ok and good If the station doesn t receive any ICMP response packets timeout errors are created The Ping command is available on every Windows 9x or Windows NT system after the TCP IP stack has been installed by the installation of the TCP IP protocol If you want to check the TCP IP connection to the ICB simply enter the command ping 198 1 1 1 in the MS DOS command prompt Therefore the connection to the ICB must be previously been built up and the ICB must use the IP address 198 1 1 1 If you have configured the ICB for the use with another IP address you only have to replace the 198 1 1 1 with
110. rent BASIC Programs are available which you find on the CD The programs are C Control BASIC Unit und M Unit program name Starter BAS C Control Station programm name CCONT BAS With the above described Nullmodem Cable you can copy the BASIC program to the device The development tools to transfer the BASIC program from the PC to the C Control device is supported form Conrad Electronic 14 3 Die Kommunikation uber das C Control Protokoll The communication between the ICB and the C Control unit is determined by the C Control protocol The transfer of the measure data captured by the C Control unit to the ICB is realised by the regular testing of the available variables The single variables are written into the cache after the query and keep their validity until the next poll cycle The content of the variable is the base for every action of the ICB If the next poll cycle is reached the contents of the variables in the cache of the ICB are overwritten by the newly collected values from the C Control unit How often the different variables are queried once by the ICB is regulated for every variable in an own poll cycle Per default the poll cycle for every variable is set to 10 seconds This value can be changed later via the controller menu if the ICB to meet individual requirements consult chapter Configuration of the ICB For that the ICB knows all the available variables and their parameters the C Control unit announces his nam
111. ributes of the variable in which the first three bits are interpreted together and the upper five bits each one as a single one So these ones can be combined in every way 14 5 Restrictions in the C Control protocol Concerning the definition of the C Control unit name and the variable name please pay attention to the fact that the length of the string should be as short as possible because the length restriction to the packet is setto 1024 bytes There is also the restriction that a information packet with a content gt amp H80 which means data bytes where the highest byte is set must by signed with a previously ESC sequence with the content amp HA8 For example if you want to transmit MeBwert as a variable name you have to transmit the variable name like that Print Me the suppresses the CR LF after the PRINT command Put amp HA8 amp HA8 transmits die ESC sequence Print the B equals amp HE1 and must be introduced with the Bwert ESC sequence For example if the bit which contains the variable attribute which determines whether the variable has a value range or not is set the transmission of the variable attribute must also be introduced with a ESC sequence The calculation of the CRC is done with the standardised process for the checksum calculation which is calculated by the formation of the anti valence CRC value1 XOR value2 XOR For example 01010001 would be returned for 10011011 XOR 11001010 The f
112. rties of the services Grafik Servic01 bmp 10 4 Changing the properties of the services lf you want to check the properties of a service or change them please mark the appropriate service and click on the Properties button So you get to the specific properties menu of the selected service which properties possibilities are each described below 10 5 Properties of the HTTP server service The HTTP server service supplies the functions for the web server in the ICB For the web server service the TCP port number the single paths of the different file types the default HTML page that is shown by an access via a web browser and the access rights on each area can be specified Eigenschaften von HT IF Server TCP Port so Weh Pfad eA CGI Pfad lcfwewicg_bin 000 Template Pfad IcAwewitemplate 00 Default HTML findexhtm Timeout feo SEC max Kenutzer aaa Grafik Servic04 bmp Rechte bernehmen Abbruch User Manual Content Seite 60 von 108 The used TCP port number is specified in the TCP port field The default value is 80 which equals the standard TCP port for the HTTP The Web path field specifies the path for the saved HTML pages on the ICB This value Is set to c www and should only be changed if you wish to change the directory structure of the ICB The path for the CGI files is specified in the CGI path field This entry basically refers to c www cgi_bin and should also only be changed if the directory structure of the I
113. s are available Log to File Writes something in a file Set Controller Variable Sets a controller variable Send file via ftp Send a file via FTP User Manual Content Seite 82 von 108 System command Executes a system command Write to LCD Writes something to the LCD display of the ICB Send Template Enables the process of a template and the transmission of a HTML file that has been created by the template After having entered the name and selected the class please click the Next button Dependant on the selected class you get the action properties field which differs dependant on the selected class In the next action properties field you can specify class dependant parameters which are described one by one below Enter the necessary values in the appropriate fields and save the new action by clicking the Apply button If you want to dismiss the new action you have to click the Cancel button 12 15 Action class Log to File For the Log to file action you have to specify the filename the maximal available number of lines and the message which shall be logged each time In the filename field you must specify the name of the Log file where the messages should be recorded The specification of the file name is restricted to the 8 3 DOS file format In the maximal lines field the number of the maximal allowed lines must be entered The definition of the maximal line number should avoid that a file with unlimited size can be created so
114. s sent to the permanently available web server The access on this file can be realised with a link in a web page of a permanently available server In this file the actually assigned IP address of the ICB is included and can for example be used a link that refers directly to the ICB with this public IP address This file is updated every time the ICB makes a new connection to the internet so that the link always refers to the actual correct IP address of the ICB The internet users can therefore access the ICB by simply following this link An example of a template can be found in the directory c www template on the ICB and the file is icohome htt A further example for a template is supplied on the CD lf you want to make an own template that creates the file that is sent with the action class Send Template you can take the existing templates and modify tem Further information about creating HTML pages can found in the chapter Creating own HTML pages Transfer your new template to any directory on the ICB and refer to this template in the Send Template action class so that a file with the desired information can be transmitted by the ICB if the event is released The function and the transmission of information according to the definition of the internet event The ICB establishes a connection to the internet service provider because The internet service prvoider of an event that has been dynamically assigns an IP released addre
115. s that has been assigned to the ICB by the internet service provider that is used for the actual connection If the ICB actually isn t connected to the internet the returned value for the variable is the standard fixed IP address of the ICB 198 1 1 1 For a function call on the system which should return the size of the free memory in Kbytes the variable system get memfree k must be inserted into the message Concerning the date and time variables the options behind must be seperated from the variables by a comma And if you wish to display text that contains characters like in the option definition you have to signal this by writing a before this characters So the macro for the date in the following format Mon den 23 01 1999 looks like this User Manual Content Seite 84 von 108 system get date ddd den dd mm ccyy 12 16 Action class Set controller variable With the Set controller variable class actions can be defined that set a variable of the C Control unit The condition for this is that the variable is settable what is indicated by the variable is settable attribute consult the description of the C Control protocol For the Set controller variable action the C Control unit the name of the variable and the value that has to be set must be defined Therefore choose the C Control unit in the field C Control unit on which the variable should be set by the action In the variable field please enter the name of the variab
116. s the ICB via telnet With the access deactivated option you can deactivate the access via the PPP and so User Manual Content Seite 53 von 108 restrict the access for the direct connection from the PC to one of the serial ports In the lower part of the Create user menu the FTP rights are administered Here you can on the one hand specify the path for the access on the available memory on the ICB and on the other hand define each single access right The directory structure on the ICB is build up like described below Erkl rung Root of the hard disk space and access to all subdirectories CFG Directory for the configuration files where all system configuration NEWS Directory where the news files for the transmission to the news se SCHEDULE Directory of the configuration files in which all alarms actions anc WWW Directory in which all the HTML files are saved PUB Directory for which you need no password to access it public are The available access rights refer to the standard FTP access rights which are described in the table below Zugriffsrecht Beschreibung Allows you to read data on the ICB via FTP u lf you want to save a newly created user account please click on the Apply button If you want to cancel the newly created user account please click on the Cancel button 9 5 Change existing user accounts Per default three users with the usernames admin webmaster and anonymous are created and available on the ICB wh
117. s to be entered with a s the minute input with a m the hours with a h and the days with a d An input of 300s for example releases an alarm every 300 seconds Ayklischer Timer Verwendung yklschen eitgeber definerer Dauer 30 Abbruch bemehmen Grafik Alarm006 bmp 12 9 Event class Internet he internet event class defines an event that is realeased by a successfully opened or closed connection to the internet This internet event is mainly used to transfer the dynamically assigned IP address of the ICB described in action class Connect Disconnect to Internet and action class Send Template To define this event you have to enter aname for the event in the Name textfield and select a previously defined provider from the Provider selector All providers that have been previously defined in the DFU network menu are selectable here By the possibility of selecting the provider you are able to realease different events for every defined internet connection so that can for example transmit the IP address of the ICB to different targets for every internet dialup connection The action selector determines whether the event is released during the Connect or the Disconnect process 12 10 Changing the properties of an existing event lf you want to change the properties of an existing event you must click on the properties button in the administration of events menu so that you get to the event depending properties menu whe
118. ss to the ICB The ICB processes a template which creates a file where certain macros The extisting file on the web are replaced with server is replaced so the web variable values The ICB server has the actual new and transfers the file that has correct IP address of the ICB been created by This IP address can be processing the template directly included in a link to aweb server via FTP The user accesses the ICB with the link on the permanently available web server The user can access the ICB with the actual link on the web server To define the action class Send Template you first have to select a provider from the provider selector In the Host textfield you can specify the target server to which the file should be sent like for example ftp compu shack de The textfields Username and Password contain the login data that might be necessary to upload the file on the server The Remote textfield contains the path on the target server where the file should be saved The local file name textfield contains the filename of the on the ICB that should be processed by this action to create the file that is transmitted User Manual Content Seite 88 von 108 The Port textfield specifies the port number which is used for FTP Port 21 is the standard port for FTP The Retries textfield determines how often the ICB should try to transmit the file if an attempt fails The Timeout value specifies the maximal time limit for the ICB
119. stallationsdiskette f r die Komponente verf gen klicken Sie auf Diskette Hersteller Hetzwerkprotok alle PSP kompatibles Protokoll Microsoft 32 Bit DLL Microsoft DLC HetBEll Onlin Diskette Veh Abbrechen Network AStan 132 Choose Microsoft and then TCP IP protocol click on OK and the installation of the TCP IP protocol will be done Check this under Properties Click in DFU Driver under Properties then you see that TCP IP is installed Grafik W95INS11 BMP Hetzwerk X Fonfiguration Identifikation Zugriff gu Eigenschaften fur DFU Treiber Die folgenden Netzwerkkomponeni Treibertyp Bindungen Erweitert m Clent fur Microsott Netzwerke klicken Ste auf die Protokolle fur die Netzwerkkarte Ihr Computer IF S Ps kompatibles Protokoll mu mit denselben Protokollen arbeiten wie die NetBEUI Netzwerk computer mit denen er Daten austauscht TCP IP IPS Pe kompatibles Protokoll C NetBEUI TCP IP Hinzufugen Entfern Prim re Netzwerk anmeldung Client fur Microsoft Netzwerke User Manual Content Seite 19 von 108 Datei und Druckerfreigabe I Beschreibung l Der Microsoft DF Adapter ermid FFF SLIF RAS und Met ware Modern oder Kabel ok Abbrechen 1415 Activate on the registrationcard the TCP IP button Additionally deactivate IPX SPX and NetBEUI Confirm with OK Click on Close Aft
120. t which accepts user inputs via the web server and sends back a HTML code via the web server 13 2 CCG Server The CCG Server can be compared with the C Control protocol but here the communication is performed via the TCP IP protocol The CCG has been especially devolopped for Java applets and other Java programs to make it possible to access C Control unit directly via the internet A Java applet is a program written in Java which is automatically executed and loaded by the web browser from the server The keyboard inputs made by any user are received by the HTTP server and sent to the CCG server So the CCG server receives the keyboard entries in form of variables The CCG server parses the inputs and combines them with actual collected variables from the connected C Control units The combination of the variables now generates a new HTML output that is given back to the HTTP server The HTTP server transmits this HTML output back to the client so that his variables now equal the content of those which contain external data Also the setting of variables is performed on this way of communication Now we will describe the interface and the possible integration of variables in self made HTML files with three examples which are concerning the C Control BASIC Unit M Unit und C Control Station beziehen Concerning the examples listed below little a basic HTML programming knowledge is taking for granted 13 3 Implementation General Communication
121. ted chipPC Technology with DIMM 144 Bus and 80386 power 2 MB DRAM and 2MB FlashHardDisk 4 serial interfaces COM 1 COM 4 1 parallel interface LPT 2 16 character LCD display for bootmessages IP address status and error message Power supply 9V 12VDC input 500mA at 5V 2 5W Metal box measurement 111 x 120 x 55 WxDxH round about 600g weight permissible humidity O 60 C 20 60 relative humidity 15 2 Software Base installation with PPP and a Browser over a Nullmodem Cable User Manual Content Seite 103 von 108 PPP Client and servermode Special support for Microsoft RAS Communication Server for the C Control WEB Server Server Side Include SSI CGI Interface Basic User Authorication Multi session capable configurable 32 Bit File System compatible to DOS file format Internet connections Modem up to 56k ISDN GSM Multitasking operting system with Real Time Kernel real time capable HT TP Server file system TCP IP FTP PPP and Telnet 15 3 Delivery Specification Internet Connector Box with Installation Manual and Utility software on CD Application examples to work with C Control Systems with the ICB The delivery does not contain the power supply and the Nullmodem Cable 15 4 Recommended Power Supplies Power Supply NG 500 9 12V DC lout 500mA Conrad Order No 518034 Mainy 9V DC lout 400mA Power 3 6W Conrad Order No 510998 15 5 Further Recommends Additio
122. the C Control User Manual Content Seite 92 von 108 unit hutschiene at the moment But if the C Control unit hutschiene isn t connected to the ICB or has no power the following text should be displayed lt HTML gt lt HEAD gt lt TITLE gt Temp1 ofHutschiene lt TITLE gt lt HEAD gt lt BODY gt lt BODY gt lt HTML gt How to turn on the 1 Relais of the C Control unit hutschiene In order to send data from a browser to the ICB you need an input form in the HTML page The user enters his values in the HTML form and sends them to the server The server starts a CGI program which analyses the data from the user inputs and in the defined cases performs an action The CGI program USER DLL allows the user to change the variables of a C Control unit To activate the 1 Relais of the C Control unit you have to create folloeing HTML page lt HTML gt lt HEAD gt lt TITLE gt Relais 1 of Hutschiene lt TITLE gt lt HEAD gt lt BODY gt lt FORM METHOD GET ACTION user dll gt Relais 1 lt INPUT TYPE hidden NAME hutschiene rel1 SIZE 10 MAXLENGTH 10 gt lt BR gt lt INPUT TYPE submit NAME cmd_set value Wert setzen gt lt FORM gt lt BODY gt lt HTML gt Save this file with the name rel1 htm in the directory c www of the ICB Browser Client Server Sends request to the server u Opens terem http 198 1 1 1 rel1 htm p i Shows HTML file a and sends it back to the browser Followin
123. the ICB can be accessed via the local serial connection to the PC or the connection via the internet So you will be able to copy files to or from the ICB for example if you want to update some files or upload your personal HTML pages The access on the ICB via the FTP is possible by using any program which has been either distributed with your PC or has been purchased additionally or is also available as freeware or shareware in the internet Basically there is a FTP client supplied with any common operating system like Windows 9x or Windows NT so that you will be able to upload or download files to or from the ICB without problems But this FTP clients are normally very simple FTP clients where you must enter the commands in a FTP command prompt with no graphic user interface integrated If you prefer using a FTP client with graphic user interface install the Light version of WS_FTP on the CD we have supplied This Light version is the reduced version of the WS_FTP Pro which can be used for free if it is used for private purposes The graphic user interface in English is self explaining and the license information are supplied with the program Start your FTP client supplied with Windows 9x or Windows NT in the MS DOS command prompt by simply entering ftp so that you get to the FTP command prompt In the FTP command prompt you have the possibility to execute several commands for the file transfer Start your FTP connection to the ICB by entering o
124. the gateway via the CCG The CCG makes the variables available which can be implemented into the HTML pages and realises the necessary data transfer to the C Control unit with one of the serial ports CGI Common Gateway Interface Protocol with which the Web Server can be combined with external programs for example letting the user make inputs into a database CHAP Challenge Handshake Authentication Protocol Client Name for a computer or a program which uses a service on the server Cookies Information which are stored in the web browser by the web server for example in order to create a context for the history of the site access of the user DES Data Encryption Standard DHCP Dynamic Host Configuration Protocol Protocol via which the dynamic assignment of the IP addresses is made in a TCP IP based network Domain Namen Subdividing unit which represents a hierarchical build up computer name in the internet For example the name http www mmc ag com consists of the topleveldomain com the secondary domain mmc ag and the computer name www You can apply for a certain secondary domain at the appropriate administration services like NIC or DE NIC but the toplevel domain has to be selected before or depends on your country or kind of business Download The copying process of a file from a HTTP or FTP server Throughput rate The actually performed throughput rate concerning DFU The throughput rate depends on the bandwidth and the server p
125. tion 7 5 Installing the DFU connection 7 6 Setting up the DFU Network properties 7 7 Establishing a connection to the ICB 8 INSTALLATION UNDER WINDOWS NT 4 0 8 1 Configuration of the Null Modem p 8 2 Installation of the Software components for a DFU Network connection 8 3 Configuration of the DFU connection 9 CONFIGURATION OF THE ICB 9 1 The User Interface 9 2 Configuration of Date and Time 9 3 Administration of the access rights 9 4 Create a new user account 9 5 Change existing user accounts 9 6 How to delete user accounts 9 7 Changing a password 10 LOOKING AT THE DEVICE PROPERTIES 10 1 Looking at the memory properties 10 2 Network properties 10 3 Services 10 4 Changing the properties of the services 10 5 Properties of the HTTP server service 10 6 Adding new HTTP rights 10 7 Changing HTTP rights 10 8 How to delete HTTP rights 10 9 Properties of the FTP server service User Manual Content Seite 3 von 108 10 10 Properties of the NNTP server service 10 11 Properties of the Telnet service 10 12 CCG Server Properties 10 13 Configuration of the serial interfaces 10 14 Modems 10 15 Adding a new modem 10 16 Changing the modem parameters 10 17 How to delete a modem 10 18 Dial up connections 10 19 Add a new dial up connection 10 20 Changing a dial up connection 10 21 How to delete a dial up connection 10 22 Controller 10 23 How to display and change the C Control Unit Properties 10 24 Delete C Control units 10 25 Eve
126. tion can be seen as a Plug amp Play functionality which offers high flexibility and user friendly functions to the user But not only the C Control units can be plugged into the ICB but also every periphery you can thin off which has a serial interface and the C Control protocol implemented So a wide field of possible applications can be realised In this chapter we will show you how the definition of actions and events and their special combinations are made The definition of the event based actions of the ICB is realised by three managers the action manager the event manager and the combination manager The events which release the actions are defined in the event manager Here you can for example define the threshold value for the variables which are delivered by the C Control unit With the action manager you can define actions which should be released by specified evenis Among other things can here define to send a file via FTP to write something in a Log file and several other actions In the combination manager the links are defined which means that you decide which event releases which action So here you create at last the links between the defined events and actions In order to link a certain event with a specified action you have to make this three steps 12 1 Release of an Action 1 Definition of an event with the event manager 2 Definition of an action with the action manager 3 Combination of the event and the actio
127. tion to the internet via the Internet Service Provider T Online and enter this name in the Network field Choose one of the available modems from the uses list In this selector all previously in the modem menu installed modems are listed Please select the serial port where the modem is connected to in the at field Enter the telephone number of your Internet Service Provider in the Telephone number field which has been sent to you by your Internet Service Provider The Hang up after field determines how long an established connection is hold after the dial up in seconds Enter this value depending on your special application For example you will only need 1 2 minutes for the upload of a file via FTP so that it is sensible to restrict the connection duration to 180 seconds in this case The need dependant maximal connection time in this case helps to optimise the dial up costs to your Internet Service Provider Please enter your username and password in the Username and Password fields that are necessary for your dial up connection to your Internet Service Provider In order to finish and save your newly created dial u connection just click the Apply button so that you get back to the Dial up menu where your newly created dial up connection is listed now If you want to dismiss your new dial up connection click on the Cancel button You also can test the newly created dial up connection After you have pressed the Testen Button the ICB tries to buil
128. tivating the checkbox FIFO active The FIFO depth in bits and the sending and receiving buffer is determined with the sending puffer and Receiving puffer fields The standard default value is 1524 bits Eigenschaften des Ports Baudrate faso Databits fe Parit t None 7 Stophits ji Flow Control RTS CTS Fifo aktiv i Sendepuffer fis24 Empfansspuffer I Grafik PORT002 bmp Abbruch _ bemehmen 10 14 Modems A modem must be connected to one of the four serial interfaces that the ICB can connect to the internet via an Internet Service Provider Basically every modem that has a serial port and that supports the PPP can be connected to the ICB and used for accessing the internet The modems and the modem specific parameters can be added by entering appropriate AT commands The administration of the modems is made via the modems menu which can be accessed by clicking the Modem symbol or the Modem text link in the menu bar User Manual Content Seite 66 von 108 Wvlodems Nul Mocem connection O Hinzuf gen ELSA Tango 1000 Hayes kompatible Modem O Enfemen Optima 8800 WFC FAX PUTS PPV Eigenschaften Abbruch In the modem menu all already existing modems are listed In the modem menu you have the possibility to add new modems change the parameters of existing modems or to delete existing modems Grafik Modem01 bmp 10 15 Adding a new modem To add a new modem please click the Add button so that you get to t
129. u have logged into the distant station you can execute certain commands on this station For the access on the distant station you must start a telnet program that is for example included in Windows 9x All local entered commands are sent to the distant station and are executed there A telnet service is integrated on the ICB to run certain administrative operations from a distant Station on the ICB Basically the user admin has the appropriate rights for the telnet access The possible operations or commands on the ICB are described in details in the chapter TCP IP service programs For the Telnet service you can specify the TCP port number the wait time and the number of maximal users Eigenschaften von TELNET TCP Port Ea Timeout iso nae max Benutzer i Grafik Servic10 bmp Abbruch __ bernehmen The used TCP port number is specified in the TCP port field Basically the value of the TCP port is set to 23 which equals the standard telnet port for the telnet service The Timeout value specifies the wait time that determines the wait time for how long a telnet User Manual Content Seite 64 von 108 connection is hold if no data transmission is in progress This wait time is basically set to 180 which equals a wait time of 180 seconds The Max User field specifies the maximal number of users that can access the ICB via Telnet at the same time The standard maximal user number is set to 1 user per default lf you have made the changes to o
130. ublication of Conrad Electronic GmbH Klaus Conrad Stra e 1 D 92240 Hirschau All rights including the translation Reproductions in any kind for example photocopy micro fitch or the recording in computers needs the written permission of the publisher Reprints also of parts of that are forbidden This installation correspond to the technical position at print date Alteration of the device in look and technic and equipment are reserved Copyright 1999 by Conrad Electronic GmbH Printed in Germany MF CTC 10 07 1999
131. und Komprimierung verwenden and use Standard Gateway in remote network Confirm this selection by pressing the OK button Grafik WNTINS22 BMP User Manual Content Seite 44 von 108 _JEI x atei Bearbeiten Ansicht 7 Heuer Telefonbucheintrag Hetzwe Eintr ge Server Skript Sicherheit 3 Disk Richtlinien fur die Echtheitsbestatiqung und Yerschlusselung a Intern B n cas Systems Nur verschl sselte Echtheitsbest tigung annehmen Mur klicrosaoft verschlusselte Echtheitsbest tigung annehmen Unsters Zena 1 Objektfe Abbrechen Aktenkotter SH Start E Arbeitsplatz 09 39 Activate accept any authenticity certification incl Uncrypted ones Beliebige Echtheitsbest tigung einschl unverschl sselte annehmen in the safety window Leave the configuration of the telephone book by pressing the OK button So you get back to the dialogue box DFU Network Grafik WNTINS23 BMP MS Bearbeiten Gneimht 7 ar DFU Netzwerk Hetzwe Telefonbucheintrag ee Welters oF Rufnummer m Intern Wahlen vor Neuer Standort Standart User Manual Content Seite 45 von 108 UDJEEILE w hlen Beenden Aktenkoffer SH Start E Arbeitsplatz a DFU Hetzwerk n9 40 Klicken Sie jetzt auf den Wahlen Button um eine Verbindung zur ICB herzustellen Grafik WNTINS24 BMP atei Bearbeiten Ansicht 7 nn m m 2s Diskette A
132. ur ICB remotely you can dial your ICB via the telephone line and access your ICB with the PPP and TCP IP protocol Configure your ICB modem with to accept calls normally ATA After connecting to the ICB it can be accessed with the IP address 198 1 1 1 and everything works the same way as if you have a direct connection between the ICB and your PC 12 21 Action class Send Template The action class Send Template makes it possible to send a file via FTP which is created just before the transmission by the processing of a template The template can contain macros that are replaced during the processing by the appropriate values of their variables So you get a file that consists of fixed text parts and values of variables and which can be designed in every possible way So it s possible to include thedynamically assigned IP address in this HTML file so that the IP address of the ICB is made public by the transmission via FTP of the HTML file to a public server The problems of the dynamically assigned IP addresses that are described with the action class Connect Disconnect to Internet make it necessary that the dynamically assigned IP address of the ICB is made public via the FTP transfer of the file to a permanently available server in the internet The IP address and further system infos User Manual Content Seite 87 von 108 can therefore be be included in the file with macros in the template The processed template returns the file that i
133. ystem The Timeout field specifies the wait time which determines how long the connection is hold after the last access has happened The wait time is basically set to 600 which equals 600 seconds In the Max user field the maximal number of users is defined that can access the FTP server at the same time The number of default user is basically set to 2 users lf you have made the changes in one of the entry fields and if you want to accept these changes please click on the Apply button If you want to dismiss the changed please click on the Cancel button 10 10 Eigenschaften von NNTP Server Dienst The NNTP Network News Transfer Protocol is the protocol out of the TCP IP protocol family with which News files can be exchanged The News files are messages from Newsgroup members that are posted in newsgroups and are so made available to other newsgroup members Each Newsgroup member sends or downloads the news files or articles with their News client which establishes a connection to the News server with the NNTP The NNTP service of the ICB makes it possible to post data that has been collected by the ICB in Newsgroups and so made available to other newsgroup members The members must therefore access the ICB which is configured as a News server with their News reader clients For the NNTP server service the TCP port number the standard directory for the outgoing news files the wait time and the number of maximal users can be defined User

2.Short Overview of the User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents