FIREPLACE HEATER - Arlec Australia
Contents
1. 12 Do not use in areas where petrol paint or flammable liquids are used or stored 13 Use the heater only as described in this manual Any other use not recommended by the manufacturer may cause fire electric shock or injury 14 Do not connect via double adapters or power boards Avoid the use of an extension cord because the extension cord may overheat and cause risk of fire However if this heater is used with an extension cord use as short a cord as practical 15 Do not use this appliance with a programmer timer or any other device that switches the heater on automatically since a fire risk exists if the appliance is covered or positioned incorrectly 16 In order to avoid overheating do not cover the heater 17 To eliminate a choking hazard for young children remove and safely discard the protective cover fitted to the power plug of this heater along with all packaging material and promotional labels 18 Fully unwind the cord before first time use 19 There are no user serviceable parts in this heater any maintenance other than cleaning should be performed by an authorised service representative 20 The installation of a residual current device safety switch is recommended to provide additional safety protection using electrical appliances Itis advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying power to the applian2. This heater is hot when in use To avoid burns do not let bare skin touch hot surfaces Use handles when moving this heater Keep combustible material such as drapery and other furnishings at least 1 metre from the heater When in use keep the mains cord of the heater from touching the heater body Do not drape the cord over the heater while hot Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating unattended 3 Always unplug heater when notin use 4 Do not operate any heater with a damaged cord or plug or after the heater malfunctions has been dropped or damaged in any manner Return heater to suitably qualified facility for examination electrical or mechanical adjustment or repair 5 Donotuse outdoors the product is designed only for household use 6 Never locate heater where it may fall into a bathtub or other water container 7 Donotrun cord under carpet Do not cover cord with throw rugs runners or the like Keep cord away from traffic areas to avoid tripping over 8 To disconnect heater turn controls to off then remove plug from outlet 9 Connectto properly earthed socket outlet of the appropriate voltage 10 Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire or damage the heater 11 To prevent a possible fire do not block the grilles in any manner
3. CPINOQ2158 5 USER MANUAL TECHNICAL SPECIFICATIONS ARLEC USERMANUAL FOR PERSONAL INDOOR USE ONLY Rated Frequency 50Hz Rated Voltage 220 240V 1850W Bulb Wattage 25W bulb 2 bulbs _ Saye eee FIREPLACE HEATER WARRANTY WITH REALISTIC LOG FLAME EFFECT Arlec guarantees this product in accordance with the Australian Consumer Law Arlec also warrants to the original first purchaser of this product you from a retailer that this product will be free of defects in materials and workmanship for a period of 12 months from the date of purchase provided the product is not used other than for the purpose or in a manner not within the scope of the recommendations and limitations specified by Arlec is new and not damaged at the time of purchase has not been subjected to abuse misuse neglect or damage has not been modified or repaired without the approval of Arlec and has not been used for commercial purposes Warranty If you wish to claim on the Warranty you must at your own expense return the product and provide proof of original purchase and your name address and telephone number to Arlec at the address below or the retailer from whom you originally purchased the product within 12 months from the date of purchase Arlec will or authorise the retailer to assess any claim you may make on the Warranty in the above manner and ff in Arlec s reasonable opinion the Warranty applies Arlec will at its own opti
4. ce See your electrician for professional advice 21 Keep these instructions handy for future reference CAUTION This heater is to be operated only in upright position e When the heater is not in use store in a cool dry location e Do not store until the heater cools down WARNING This appliance is not intended for use by young children or infirm persons unless they have been adequately supervised by a responsible person to ensure that they can use the appliance safely e Young Children should be supervised to ensure that they do not play with the appliance The heater must be positioned in such a way that there is at least 200mm from back wall e The heater must not be located in front of socket outlet e Donotuse this heater inthe immediate surroundings of a bath shower or swimming pool HELPFUL ADVICE BEFORE USE Please retain all packaging until you have checked and counted all the parts and the contents of the fixing pack against the parts list e The fixing pack contains small items which should be kept away from young children e We suggest that you open the fixing pack and place all the contents into a container therefore reducing the risk of losing any small pieces e This appliance is heavy two people are recommended for lifting 900w 900W CONTROL PANEL Control panel is located at the top of the appliance lift the cover to assess to the control panel 1 Control Panel Cover 2 Flame A
5. djustment Switch 3 Thermostat 4 Other Controls 4a Fan without heating 4b Heat 900W 4c Heat 900W 4d Flame Effect On Off OPERATING INSTRUCTIONS Caution There may be some odor coming from the heater for the very first time you use this heater This is normal during the break in period or after long term storage Make sure the heater is in well ventilated area and continue running it until the smell goes away BEFORE FIRST USE Remove all the packaging material along with any promotional material Unwind the cord to its full length and place the heater on a firm level surface in a stable upright position Visually inspect he air inlets and outlets to ensure that there are no blockages 1 Insert Plug Into Socket 2 Open the control panel cover 1 3 Select the desired function Flame effect On Off 4d Fan 4a Figure 1 without heating Low heat 900w 4a 4b or 4a 4c Figure 1 Full heater 1800w 4a 4b 4c Figure 1 Heat and Flame effect 4a 4b 4c 4d Figure 1 CPINOOQ2158 5 4 Itis necessary to switch on the fan to activate heat functions Without fan heating will not run 5 Increase or decrease the flame effect by rotating the flame adjustment switch 2 Figure 1 6 Rotate thermostat control 3 Figure 1 clockwise or anti clockwise to achieve desired room temperature SAFETY CUT OFF This appliance is fitted with a safety cut off which will operate if the heater overheats eg du
6. e to blocked air vents For safety reasons the heater will NOT automatically reset e To resetthe appliance disconnect the appliance from the mains supply for at least 30 minutes Reconnect the supply to the mains and switch on the appliance REPLACING THE FLAME EFFECT LIGHT BULB Back window screws WARNING Always disconnect the heater unit from the power supply before you attempt to replace the globes The globes reach high temperature during operation Give enough time for the globes to cool down 1 Loosen the two screws atthe back window of heater 2 Liftup the back window and remove it 3 Replace the bulb with a 25W candle bulb See Figure 3 4 Toreassemble follow the above instructions in reverse order 5 Always unplug before replace the light bulbs EFFECTS MECHANISM Turn anti clockwise Turn anti clockwise to remove to tighten
7. on and expense or authorise the retailer to replace the product with the same or similar product or repair the product and return it to you or refund the price you paid for the product Arlec will bear its own expenses of doing those things and you must bear any other expenses of claiming on the Warranty The Warranty is in addition to other rights and remedies you may have under a law in relation to the product to which the Warranty relates Our goods come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure ARLEC For all Sales amp Warranty enquiries Arlec Australia Pty Ltd ACN 009 322 105 EEP TO REDUCE THE RISK OF FIRE ELECTRIC SHOCK Arlec gives the Warranty OR PERSONAL INJURY READ UNDERSTAND Building 3 31 41 Joseph Street Blackburn North Victoria 3130 AND FOLLOW INSTRUCTIONS BEFORE Blackburn North LPO P O Box 1065 Blackburn North 3130 i y USING THIS HEATER Customer Service 03 9982 5111 A Vi 1 e New Zealand Toll Free 0800 003 329 CPIN002158 5 Ea NEO Om d KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE IMPORTANT SAFEGUARDS 1 Read all instructions before using this heater 2
Download Pdf Manuals
Related Search